/usr/lib/x86_64-linux-gnu/perl5/5.20/Devel/Declare.pm is in libdevel-declare-perl 0.006017-1+deb8u1.
This file is owned by root:root, with mode 0o644.
The actual contents of the file can be viewed below.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 | package Devel::Declare;
# ABSTRACT: Adding keywords to perl, in perl
use strict;
use warnings;
use 5.008001;
our $VERSION = '0.006017';
use constant DECLARE_NAME => 1;
use constant DECLARE_PROTO => 2;
use constant DECLARE_NONE => 4;
use constant DECLARE_PACKAGE => 8+1; # name implicit
use vars qw(%declarators %declarator_handlers @ISA);
use base qw(DynaLoader);
use Scalar::Util 'set_prototype';
use B::Hooks::OP::Check 0.19;
bootstrap Devel::Declare;
@ISA = ();
initialize();
sub import {
my ($class, %args) = @_;
my $target = caller;
if (@_ == 1) { # "use Devel::Declare;"
no strict 'refs';
foreach my $name (qw(NAME PROTO NONE PACKAGE)) {
*{"${target}::DECLARE_${name}"} = *{"DECLARE_${name}"};
}
} else {
$class->setup_for($target => \%args);
}
}
sub unimport {
my ($class) = @_;
my $target = caller;
$class->teardown_for($target);
}
sub setup_for {
my ($class, $target, $args) = @_;
setup();
foreach my $key (keys %$args) {
my $info = $args->{$key};
my ($flags, $sub);
if (ref($info) eq 'ARRAY') {
($flags, $sub) = @$info;
} elsif (ref($info) eq 'CODE') {
$flags = DECLARE_NAME;
$sub = $info;
} elsif (ref($info) eq 'HASH') {
$flags = 1;
$sub = $info;
} else {
die "Info for sub ${key} must be [ \$flags, \$sub ] or \$sub or handler hashref";
}
$declarators{$target}{$key} = $flags;
$declarator_handlers{$target}{$key} = $sub;
}
}
sub teardown_for {
my ($class, $target) = @_;
delete $declarators{$target};
delete $declarator_handlers{$target};
}
my $temp_name;
my $temp_save;
sub init_declare {
my ($usepack, $use, $inpack, $name, $proto, $traits) = @_;
my ($name_h, $XX_h, $extra_code)
= $declarator_handlers{$usepack}{$use}->(
$usepack, $use, $inpack, $name, $proto, defined(wantarray), $traits
);
($temp_name, $temp_save) = ([], []);
if ($name) {
$name = "${inpack}::${name}" unless $name =~ /::/;
shadow_sub($name, $name_h);
}
if ($XX_h) {
shadow_sub("${inpack}::X", $XX_h);
}
if (defined wantarray) {
return $extra_code || '0;';
} else {
return;
}
}
sub shadow_sub {
my ($name, $cr) = @_;
push(@$temp_name, $name);
no strict 'refs';
my ($pack, $pname) = ($name =~ m/(.+)::([^:]+)/);
push(@$temp_save, $pack->can($pname));
no warnings 'redefine';
no warnings 'prototype';
*{$name} = $cr;
set_in_declare(~~@{$temp_name||[]});
}
sub done_declare {
no strict 'refs';
my $name = shift(@{$temp_name||[]});
die "done_declare called with no temp_name stack" unless defined($name);
my $saved = shift(@$temp_save);
$name =~ s/(.*):://;
my $temp_pack = $1;
delete ${"${temp_pack}::"}{$name};
if ($saved) {
no warnings 'prototype';
*{"${temp_pack}::${name}"} = $saved;
}
set_in_declare(~~@{$temp_name||[]});
}
sub build_sub_installer {
my ($class, $pack, $name, $proto) = @_;
return eval "
package ${pack};
my \$body;
sub ${name} (${proto}) :lvalue {\n"
.' if (wantarray) {
goto &$body;
}
my $ret = $body->(@_);
return $ret;
};
sub { ($body) = @_; };';
}
sub setup_declarators {
my ($class, $pack, $to_setup) = @_;
die "${class}->setup_declarators(\$pack, \\\%to_setup)"
unless defined($pack) && ref($to_setup) eq 'HASH';
my %setup_for_args;
foreach my $name (keys %$to_setup) {
my $info = $to_setup->{$name};
my $flags = $info->{flags} || DECLARE_NAME;
my $run = $info->{run};
my $compile = $info->{compile};
my $proto = $info->{proto} || '&';
my $sub_proto = $proto;
# make all args optional to enable lvalue for DECLARE_NONE
$sub_proto =~ s/;//; $sub_proto = ';'.$sub_proto;
#my $installer = $class->build_sub_installer($pack, $name, $proto);
my $installer = $class->build_sub_installer($pack, $name, '@');
$installer->(sub :lvalue {
#{ no warnings 'uninitialized'; warn 'INST: '.join(', ', @_)."\n"; }
if (@_) {
if (ref $_[0] eq 'HASH') {
shift;
if (wantarray) {
my @ret = $run->(undef, undef, @_);
return @ret;
}
my $r = $run->(undef, undef, @_);
return $r;
} else {
return @_[1..$#_];
}
}
return my $sv;
});
$setup_for_args{$name} = [
$flags,
sub {
my ($usepack, $use, $inpack, $name, $proto, $shift_hashref, $traits) = @_;
my $extra_code = $compile->($name, $proto, $traits);
my $main_handler = sub { shift if $shift_hashref;
("DONE", $run->($name, $proto, @_));
};
my ($name_h, $XX);
if (defined $proto) {
$name_h = sub :lvalue { return my $sv; };
$XX = $main_handler;
} elsif (defined $name && length $name) {
$name_h = $main_handler;
}
$extra_code ||= '';
$extra_code = '}, sub {'.$extra_code;
return ($name_h, $XX, $extra_code);
}
];
}
$class->setup_for($pack, \%setup_for_args);
}
sub install_declarator {
my ($class, $target_pack, $target_name, $flags, $filter, $handler) = @_;
$class->setup_declarators($target_pack, {
$target_name => {
flags => $flags,
compile => $filter,
run => $handler,
}
});
}
sub linestr_callback_rv2cv {
my ($name, $offset) = @_;
$offset += toke_move_past_token($offset);
my $pack = get_curstash_name();
my $flags = $declarators{$pack}{$name};
my ($found_name, $found_proto);
if ($flags & DECLARE_NAME) {
$offset += toke_skipspace($offset);
my $linestr = get_linestr();
if (substr($linestr, $offset, 2) eq '::') {
substr($linestr, $offset, 2) = '';
set_linestr($linestr);
}
if (my $len = toke_scan_word($offset, $flags & DECLARE_PACKAGE)) {
$found_name = substr($linestr, $offset, $len);
$offset += $len;
}
}
if ($flags & DECLARE_PROTO) {
$offset += toke_skipspace($offset);
my $linestr = get_linestr();
if (substr($linestr, $offset, 1) eq '(') {
my $length = toke_scan_str($offset);
$found_proto = get_lex_stuff();
clear_lex_stuff();
my $replace =
($found_name ? ' ' : '=')
.'X'.(' ' x length($found_proto));
$linestr = get_linestr();
substr($linestr, $offset, $length) = $replace;
set_linestr($linestr);
$offset += $length;
}
}
my @args = ($pack, $name, $pack, $found_name, $found_proto);
$offset += toke_skipspace($offset);
my $linestr = get_linestr();
if (substr($linestr, $offset, 1) eq '{') {
my $ret = init_declare(@args);
$offset++;
if (defined $ret && length $ret) {
substr($linestr, $offset, 0) = $ret;
set_linestr($linestr);
}
} else {
init_declare(@args);
}
#warn "linestr now ${linestr}";
}
sub linestr_callback_const {
my ($name, $offset) = @_;
my $pack = get_curstash_name();
my $flags = $declarators{$pack}{$name};
if ($flags & DECLARE_NAME) {
$offset += toke_move_past_token($offset);
$offset += toke_skipspace($offset);
if (toke_scan_word($offset, $flags & DECLARE_PACKAGE)) {
my $linestr = get_linestr();
substr($linestr, $offset, 0) = '::';
set_linestr($linestr);
}
}
}
sub linestr_callback {
my $type = shift;
my $name = $_[0];
my $pack = get_curstash_name();
my $handlers = $declarator_handlers{$pack}{$name};
if (ref $handlers eq 'CODE') {
my $meth = "linestr_callback_${type}";
__PACKAGE__->can($meth)->(@_);
} elsif (ref $handlers eq 'HASH') {
if ($handlers->{$type}) {
$handlers->{$type}->(@_);
}
} else {
die "PANIC: unknown thing in handlers for $pack $name: $handlers";
}
}
=head1 NAME
Devel::Declare - Adding keywords to perl, in perl
=head1 SYNOPSIS
use Method::Signatures;
# or ...
use MooseX::Declare;
# etc.
# Use some new and exciting syntax like:
method hello (Str :$who, Int :$age where { $_ > 0 }) {
$self->say("Hello ${who}, I am ${age} years old!");
}
=head1 DESCRIPTION
L<Devel::Declare> can install subroutines called declarators which locally take
over Perl's parser, allowing the creation of new syntax.
This document describes how to create a simple declarator.
=head1 USAGE
We'll demonstrate the usage of C<Devel::Declare> with a motivating example: a new
C<method> keyword, which acts like the builtin C<sub>, but automatically unpacks
C<$self> and the other arguments.
package My::Methods;
use Devel::Declare;
=head2 Creating a declarator with C<setup_for>
You will typically create
sub import {
my $class = shift;
my $caller = caller;
Devel::Declare->setup_for(
$caller,
{ method => { const => \&parser } }
);
no strict 'refs';
*{$caller.'::method'} = sub (&) {};
}
Starting from the end of this import routine, you'll see that we're creating a
subroutine called C<method> in the caller's namespace. Yes, that's just a normal
subroutine, and it does nothing at all (yet!) Note the prototype C<(&)> which means
that the caller would call it like so:
method {
my ($self, $arg1, $arg2) = @_;
...
}
However we want to be able to call it like this
method foo ($arg1, $arg2) {
...
}
That's why we call C<setup_for> above, to register the declarator 'method' with a custom
parser, as per the next section. It acts on an optype, usually C<'const'> as above.
(Other valid values are C<'check'> and C<'rv2cv'>).
For a simpler way to install new methods, see also L<Devel::Declare::MethodInstaller::Simple>
=head2 Writing a parser subroutine
This subroutine is called at I<compilation> time, and allows you to read the custom
syntaxes that we want (in a syntax that may or may not be valid core Perl 5) and
munge it so that the result will be parsed by the C<perl> compiler.
For this example, we're defining some globals for convenience:
our ($Declarator, $Offset);
Then we define a parser subroutine to handle our declarator. We'll look at this in
a few chunks.
sub parser {
local ($Declarator, $Offset) = @_;
C<Devel::Declare> provides some very low level utility methods to parse character
strings. We'll define some useful higher level routines below for convenience,
and we can use these to parse the various elements in our new syntax.
Notice how our parser subroutine is invoked at compile time,
when the C<perl> parser is pointed just I<before> the declarator name.
skip_declarator; # step past 'method'
my $name = strip_name; # strip out the name 'foo', if present
my $proto = strip_proto; # strip out the prototype '($arg1, $arg2)', if present
Now we can prepare some code to 'inject' into the new subroutine. For example we
might want the method as above to have C<my ($self, $arg1, $arg2) = @_> injected at
the beginning of it. We also do some clever stuff with scopes that we'll look
at shortly.
my $inject = make_proto_unwrap($proto);
if (defined $name) {
$inject = scope_injector_call().$inject;
}
inject_if_block($inject);
We've now managed to change C<method ($arg1, $arg2) { ... }> into C<method {
injected_code; ... }>. This will compile... but we've lost the name of the
method!
In a cute (or horrifying, depending on your perspective) trick, we temporarily
change the definition of the subroutine C<method> itself, to specialise it with
the C<$name> we stripped, so that it assigns the code block to that name.
Even though the I<next> time C<method> is compiled, it will be
redefined again, C<perl> caches these definitions in its parse
tree, so we'll always get the right one!
Note that we also handle the case where there was no name, allowing
an anonymous method analogous to an anonymous subroutine.
if (defined $name) {
$name = join('::', Devel::Declare::get_curstash_name(), $name)
unless ($name =~ /::/);
shadow(sub (&) { no strict 'refs'; *{$name} = shift; });
} else {
shadow(sub (&) { shift });
}
}
=head2 Parser utilities in detail
For simplicity, we're using global variables like C<$Offset> in these examples.
You may prefer to look at L<Devel::Declare::Context::Simple>, which
encapsulates the context much more cleanly.
=head3 C<skip_declarator>
This simple parser just moves across a 'token'. The common case is
to skip the declarator, i.e. to move to the end of the string
'method' and before the prototype and code block.
sub skip_declarator {
$Offset += Devel::Declare::toke_move_past_token($Offset);
}
=head4 C<toke_move_past_token>
This builtin parser simply moves past a 'token' (matching C</[a-zA-Z_]\w*/>)
It takes an offset into the source document, and skips past the token.
It returns the number of characters skipped.
=head3 C<strip_name>
This parser skips any whitespace, then scans the next word (again matching a
'token'). We can then analyse the current line, and manipulate it (using pure
Perl). In this case we take the name of the method out, and return it.
sub strip_name {
skipspace;
if (my $len = Devel::Declare::toke_scan_word($Offset, 1)) {
my $linestr = Devel::Declare::get_linestr();
my $name = substr($linestr, $Offset, $len);
substr($linestr, $Offset, $len) = '';
Devel::Declare::set_linestr($linestr);
return $name;
}
return;
}
=head4 C<toke_scan_word>
This builtin parser, given an offset into the source document,
matches a 'token' as above but does not skip. It returns the
length of the token matched, if any.
=head4 C<get_linestr>
This builtin returns the full text of the current line of the source document.
=head4 C<set_linestr>
This builtin sets the full text of the current line of the source document.
Beware that injecting a newline into the middle of the line is likely
to fail in surprising ways. Generally, Perl's parser can rely on the
`current line' actually being only a single line. Use other kinds of
whitespace instead, in the code that you inject.
=head3 C<skipspace>
This parser skips whitsepace.
sub skipspace {
$Offset += Devel::Declare::toke_skipspace($Offset);
}
=head4 C<toke_skipspace>
This builtin parser, given an offset into the source document,
skips over any whitespace, and returns the number of characters
skipped.
=head3 C<strip_proto>
This is a more complex parser that checks if it's found something that
starts with C<'('> and returns everything till the matching C<')'>.
sub strip_proto {
skipspace;
my $linestr = Devel::Declare::get_linestr();
if (substr($linestr, $Offset, 1) eq '(') {
my $length = Devel::Declare::toke_scan_str($Offset);
my $proto = Devel::Declare::get_lex_stuff();
Devel::Declare::clear_lex_stuff();
$linestr = Devel::Declare::get_linestr();
substr($linestr, $Offset, $length) = '';
Devel::Declare::set_linestr($linestr);
return $proto;
}
return;
}
=head4 C<toke_scan_str>
This builtin parser uses Perl's own parsing routines to match a "stringlike"
expression. Handily, this includes bracketed expressions (just think about
things like C<q(this is a quote)>).
Also it Does The Right Thing with nested delimiters (like C<q(this (is (a) quote))>).
It returns the effective length of the expression matched. Really, what
it returns is the difference in position between where the string started,
within the buffer, and where it finished. If the string extended across
multiple lines then the contents of the buffer may have been completely
replaced by the new lines, so this position difference is not the same
thing as the actual length of the expression matched. However, because
moving backward in the buffer causes problems, the function arranges
for the effective length to always be positive, padding the start of
the buffer if necessary.
Use C<get_lex_stuff> to get the actual matched text, the content of
the string. Because of the behaviour around multiline strings, you
can't reliably get this from the buffer. In fact, after the function
returns, you can't rely on any content of the buffer preceding the end
of the string.
If the string being scanned is not well formed (has no closing delimiter),
C<toke_scan_str> returns C<undef>. In this case you cannot rely on the
contents of the buffer.
=head4 C<get_lex_stuff>
This builtin returns what was matched by C<toke_scan_str>. To avoid segfaults,
you should call C<clear_lex_stuff> immediately afterwards.
=head2 Munging the subroutine
Let's look at what we need to do in detail.
=head3 C<make_proto_unwrap>
We may have defined our method in different ways, which will result
in a different value for our prototype, as parsed above. For example:
method foo { # undefined
method foo () { # ''
method foo ($arg1) { # '$arg1'
We deal with them as follows, and return the appropriate C<my ($self, ...) = @_;>
string.
sub make_proto_unwrap {
my ($proto) = @_;
my $inject = 'my ($self';
if (defined $proto) {
$inject .= ", $proto" if length($proto);
$inject .= ') = @_; ';
} else {
$inject .= ') = shift;';
}
return $inject;
}
=head3 C<inject_if_block>
Now we need to inject it after the opening C<'{'> of the method body.
We can do this with the building blocks we defined above like C<skipspace>
and C<get_linestr>.
sub inject_if_block {
my $inject = shift;
skipspace;
my $linestr = Devel::Declare::get_linestr;
if (substr($linestr, $Offset, 1) eq '{') {
substr($linestr, $Offset+1, 0) = $inject;
Devel::Declare::set_linestr($linestr);
}
}
=head3 C<scope_injector_call>
We want to be able to handle both named and anonymous methods. i.e.
method foo () { ... }
my $meth = method () { ... };
These will then get rewritten as
method { ... }
my $meth = method { ... };
where 'method' is a subroutine that takes a code block. Spot the problem?
The first one doesn't have a semicolon at the end of it! Unlike 'sub' which
is a builtin, this is just a normal statement, so we need to terminate it.
Luckily, using C<B::Hooks::EndOfScope>, we can do this!
use B::Hooks::EndOfScope;
We'll add this to what gets 'injected' at the beginning of the method source.
sub scope_injector_call {
return ' BEGIN { MethodHandlers::inject_scope }; ';
}
So at the beginning of every method, we are passing a callback that will get invoked
at the I<end> of the method's compilation... i.e. exactly then the closing C<'}'>
is compiled.
sub inject_scope {
on_scope_end {
my $linestr = Devel::Declare::get_linestr;
my $offset = Devel::Declare::get_linestr_offset;
substr($linestr, $offset, 0) = ';';
Devel::Declare::set_linestr($linestr);
};
}
=head2 Shadowing each method.
=head3 C<shadow>
We override the current definition of 'method' using C<shadow>.
sub shadow {
my $pack = Devel::Declare::get_curstash_name;
Devel::Declare::shadow_sub("${pack}::${Declarator}", $_[0]);
}
For a named method we invoked like this:
shadow(sub (&) { no strict 'refs'; *{$name} = shift; });
So in the case of a C<method foo { ... }>, this call would redefine C<method>
to be a subroutine that exports 'sub foo' as the (munged) contents of C<{...}>.
The case of an anonymous method is also cute:
shadow(sub (&) { shift });
This means that
my $meth = method () { ... };
is rewritten with C<method> taking the codeblock, and returning it as is to become
the value of C<$meth>.
=head4 C<get_curstash_name>
This returns the package name I<currently being compiled>.
=head4 C<shadow_sub>
Handles the details of redefining the subroutine.
=head1 SEE ALSO
One of the best ways to learn C<Devel::Declare> is still to look at
modules that use it:
L<http://cpants.perl.org/dist/used_by/Devel-Declare>.
=head1 AUTHORS
Matt S Trout - E<lt>mst@shadowcat.co.ukE<gt> - original author
Company: http://www.shadowcat.co.uk/
Blog: http://chainsawblues.vox.com/
Florian Ragwitz E<lt>rafl@debian.orgE<gt> - maintainer
osfameron E<lt>osfameron@cpan.orgE<gt> - first draft of documentation
=head1 COPYRIGHT AND LICENSE
This library is free software under the same terms as perl itself
Copyright (c) 2007, 2008, 2009 Matt S Trout
Copyright (c) 2008, 2009 Florian Ragwitz
stolen_chunk_of_toke.c based on toke.c from the perl core, which is
Copyright (C) 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
2000, 2001, 2002, 2003, 2004, 2005, 2006, by Larry Wall and others
=cut
1;
|