libgs9-common 9.06~dfsg-2+deb8u7 / usr / share / ghostscript / 9.06 / Resource / Init / pdf_ops.ps

% Copyright (C) 2001-2012 Artifex Software, Inc.
% All Rights Reserved.
%
% This software is provided AS-IS with no warranty, either express or
% implied.
%
% This software is distributed under license and may not be copied,
% modified or distributed except as expressly authorized under the terms
% of the license contained in the file LICENSE in this distribution.
%
% Refer to licensing information at http://www.artifex.com or contact
% Artifex Software, Inc.,  7 Mt. Lassen Drive - Suite A-134, San Rafael,
% CA  94903, U.S.A., +1(415)492-9861, for further information.
%

% Definitions for most of the PDF operators.

.currentglobal //true .setglobal

% Define pdfmark.  Don't allow it to be bound in.
% Also don't define it in systemdict, because this leads some Adobe code
% to think this interpreter is a distiller.
% (If this interpreter really is a distiller, don't do this.)
systemdict /pdfmark known not
 { userdict /pdfmark { cleartomark } bind put } if

userdict /GS_PDF_ProcSet 127 dict dup begin

% ---------------- Abbreviations ---------------- %

/bdef { bind def } bind def

% ---------------- Graphics state stack ---------------- %

% PDF adds a number of parameters to the graphics state.
% We implement this by pushing and popping a dictionary
% each time we do a PDF gsave or grestore.
% The keys in this dictionary are as follows:
%	self			% identifies the dictionary as one of ours
%	ClipRect		% (optional)
%	Show
%	TextSaveMatrix		% matrix at time of BT (iff within BT/ET)
% (The following correspond directly to PDF state parameters.)
%	AlphaIsShape
%	FillConstantAlpha
%	FillColor
%	FillColorSpace
%	FillOverprint
%	SoftMask
%	StrokeConstantAlpha
%	StrokeColor
%	StrokeColorSpace
%	StrokeOverprint
%	TextSpacing
%	TextHScaling
%	Leading
%	TextFont
%	TextLineMatrix
%	TextMatrix
%	TextRise
%	TextRenderingMode
%	WordSpacing
% (The following is cached information derived from other graphics state params)
%	FontMatrixNonHV % TextFont.FontMatrix alters horz/vert glyph advance vector direction

/nodict 1 dict def
nodict /self { //nodict } executeonly put % to avoid recursion in dumps
nodict readonly pop

/dictbeginpage {	% <initialdict> dictbeginpage -
  20 dict copy dup begin
  1 packedarray cvx executeonly /self exch def
  graphicsbeginpage textbeginpage
} bdef
/endpage {	% - endpage -
  showpage end
} bdef

/graphicsbeginpage {
  initgraphics
  //true .setaccuratecurves
  currentdict /ClipRect knownoget { aload pop rectclip } if
  0 g  0 G //false op //false OP  0 OPM
  1 ca  1 CA //null SMask //false AIS  /Compatible BM //true TK
} bdef

/gput		% <value> <key> gput -
 { 
   currentdict /n known {
     pop pop
     (   **** Ignoring changes to the graphic state after operator 'W'.\n)
     pdfformaterror
   } {
     exch currentdict //nodict eq { /self dup load end 5 dict begin def } if
     def
   } ifelse  
 } bdef

/q {
  gsave //nodict begin
  PDFusingtransparency { .pushextendedgstate } if
} bdef

% Some PDF files have excess Q operators!
/Q {
  //false
  { currentdict /n known { end pop //true } { exit } ifelse 
  } loop {
    (   **** Dropping unfinished 'W' mode at 'Q'.\n)
    pdfformaterror
  } if
  currentdict /self .knownget {
    exec //nodict eq {
      end
      PDFusingtransparency { .popextendedgstate } if
      % Restore graphics state, but do not modify path. Paths are not part
      % of the PDF graphics state; see 4.4.1 of PDF reference 3rd ed.
      % Collecting the path with one ctm and re-playing it with another ctm
      % transforms the path exactly as PDF needs.
      .getpath grestore newpath { exec } forall
      //false
    } {
      //true
    } ifelse
  } {
    //true	% formaterror -- not a gsave dict
  } ifelse
  { (\n   **** File has unbalanced q/Q operators \(too many Q's\) ****\n)
    pdfformaterror
  } if
} bdef

% Save PDF gstate
/qstate {       % - qstate <qstate>
  gstate
} bdef

% Set PDF gstate
/setqstate {    % <qstate> setqstate -
  { matrix setmatrix //false upath } stopped {
    pop setgstate newpath
  } {
    % Save the CTM, set identity during the uappend, then set the CTM
    exch setgstate matrix currentmatrix matrix setmatrix
    exch newpath uappend setmatrix
  } ifelse
} bdef

% Save most of graphic state attributes.
% - get-gs-attrs ...
/get-gs-attrs {
  currentsmoothness
  currentflat
  currentoverprint
  currentstrokeadjust
  currentdash
  currentmiterlimit
  currentlinejoin
  currentlinecap
  currentlinewidth
  currentfont
  currentcolor
  currentcolorspace
  { currentpoint } stopped
  matrix currentmatrix
} bdef

% Restore most of graphic state attributes.
% ... get-gs-attrs -
/set-gs-attrs {
  setmatrix
  { newpath } { moveto } ifelse
  setcolorspace
  setcolor
  setfont
  setlinewidth
  setlinecap
  setlinejoin
  setmiterlimit
  setdash
  setstrokeadjust
  setoverprint
  setflat
  setsmoothness
} bdef

% ---------------- Color setting ---------------- %

/fcput		% <color> <colorspace> fcput -
 { /FillColorSpace gput /FillColor gput
 } bdef
/scput		% <color> <colorspace> scput -
 { /StrokeColorSpace gput /StrokeColor gput
 } bdef
/csput		% <colorspace> csput -
 { csset 2 copy fcput scput
 } bdef

/csdevgray [/DeviceGray] readonly def
/csdevrgb [/DeviceRGB] readonly def
/csdevcmyk [/DeviceCMYK] readonly def
/cspattern [/Pattern] readonly def
/nullpatternproc { pop } bdef
/nullpattern mark
   /PatternType 1 /PaintType 1 /TilingType 3 /BBox [0 0 1 1]
   /XStep 1 /YStep 1 /PaintProc //nullpatternproc
.dicttomark readonly def

% Each entry in the color space dictionary is a procedure of the form
%	<cspace> -proc- <cspace> <initial-color>
/CSdict mark
  /DeviceGray { pop //csdevgray 0 } bind
  /DeviceRGB { pop //csdevrgb [0 0 0] cvx } bind
  /DeviceCMYK { pop //csdevcmyk [0 0 0 1] cvx } bind
  /CIEBasedA { 0 } bind
  /CIEBasedABC { [0 0 0] cvx } bind
  /CalGray { pop //csdevgray 0 } bind
  /CalRGB { pop //csdevrgb [0 0 0] cvx } bind
  /Lab {[0 0 0] cvx } bind
  /ICCBased { [ 1 index 1 oget /N get { 0 } repeat ] cvx } bind
  /Separation { 1 } bind
  /DeviceN {	% What is the correct value??
    [ 1 index 1 get length { 1 } repeat ] cvx
  } bind
  /Indexed { 0 } bind
  /Pattern {
    dup type /nametype eq 1 index length 1 eq or {
      pop //cspattern //nullpattern matrix makepattern
    } {
      //nullpattern matrix makepattern 1 index 1 get csset
                % Stack: patternspace nullpattern basecolor basespace
      pop [ 3 1 roll dup type /arraytype eq { aload pop } if
      counttomark -1 roll ] cvx
    } ifelse
  } bind
.dicttomark readonly def
/csset			% <cspace> csset <color> <cspace>
 { dup dup type /nametype ne { 0 get } if //CSdict exch get exec exch
 } bdef

/g { //csdevgray fcput } bdef
/G { //csdevgray scput } bdef
/rg { 3 array astore cvx //csdevrgb fcput } bdef
/RG { 3 array astore cvx //csdevrgb scput } bdef
/k { 4 array astore cvx //csdevcmyk fcput } bdef
/K { 4 array astore cvx //csdevcmyk scput } bdef
/cs { csset fcput } bdef
/CS { csset scput } bdef
/ri { //.renderingintentdict exch .knownget { .setrenderingintent } if } bdef
% We have to break up sc according to the number of operands.
/sc1 { /FillColor gput } bdef
/SC1 { /StrokeColor gput } bdef
% We have to avoid storing into a color array associated with an outer
% gsave level, so we do a kind of "copy on write".
/sc* {
  currentdict /FillColor .knownget {
    astore pop
  } {
    /FillColor load
    % FillColor may contain either a single value or an array.
    dup type /arraytype eq { length }{ pop 1 } ifelse
    array astore cvx /FillColor gput
  } ifelse
} bdef
/SC* {
  currentdict /StrokeColor .knownget {
    astore pop
  } {
    /StrokeColor load
    % StrokeColor may contain either a single value or an array.
    dup type /arraytype eq { length }{ pop 1 } ifelse
    array astore cvx /StrokeColor gput
  } ifelse
} bdef

% ---------------- Overprint/transparency setting ---------------- %

/op { /FillOverprint gput } bdef
/OP { /StrokeOverprint gput } bdef
/OPM {
  /.setoverprintmode where { pop dup .setoverprintmode .swapcolors .setoverprintmode .swapcolors } { pop } ifelse
} bdef
/ca { /FillConstantAlpha gput } bdef
/CA { /StrokeConstantAlpha gput } bdef
/SMask { /SoftMask gput } bdef
/AIS { /AlphaIsShape gput } bdef
/BM {
  /.setblendmode where {
    pop [ exch dup type /nametype ne { aload pop } if /Normal ] {
      { .setblendmode } .internalstopped not { exit } if pop
    } forall
  } {
    pop
  } ifelse
} bdef
/TK {
  /.settextknockout where { pop .settextknockout } { pop } ifelse
} bdef

% ---------------- Color installation ---------------- %

% Establish a given color (and color space) as current.
/.settransparencyparams {	% <alpha> <smask> .settransparencyparams -
  PDFusingtransparency {
    /.begintransparencygroup where {
      pop AlphaIsShape {
        1 .setopacityalpha  exch .setshapealpha 1
      } {
        1 .setshapealpha  exch .setopacityalpha 0
      } ifelse
        % Set the soft mask by rendering the XObject.  Doing this every time
        % is obviously very inefficient; we'll improve it later.
      .settransparencymask
    } {
      pop pop
    } ifelse
  } {
    pop pop
  } ifelse
} bdef
/.settransparencymask {		% <paramdict> <masknum> .settransparencymask -
  exch dup //null eq {
    PDFusingtransparency {
      pop pop
    } {
      dup /Draw get exec
    } ifelse
  } {
    dup /Draw get exec
  } ifelse
} bdef
% (Non-mask) images must execute setfillblend.
/setfillblend {
  FillOverprint setoverprint
  FillConstantAlpha SoftMask .settransparencyparams
} def
/setfillstate {
  FillColor FillColorSpace setgcolor setfillblend
} def

/setstrokestate {
  .swapcolors
  StrokeColor StrokeColorSpace setgcolor StrokeOverprint setoverprint
  StrokeConstantAlpha SoftMask .settransparencyparams
  .swapcolors
} def
/Cdict 15 dict dup begin	% <color...> <colorspace> -proc- -
  /DeviceGray { pop setgray } bdef
  /DeviceRGB { pop setrgbcolor } bdef
  /DeviceCMYK { pop setcmykcolor } bdef
  /CIEBasedA { setgcolorspace setcolor } bdef
  /CIEBasedABC /CIEBasedA load def
  /CIEBasedDEF /CIEBasedA load def
  /CIEBasedDEFG /CIEBasedA load def
  /CalRGB /CIEBasedA load def
  /CalGray /CIEBasedA load def
  /Lab /CIEBasedA load def
  /ICCBased /CIEBasedA load def
  /Separation /CIEBasedA load def
  /DeviceN /CIEBasedA load def
  /Indexed /CIEBasedA load def
  /Pattern
   { setgcolorspace

     % Since multiple patterns may share
     % same data stream, we need to ensure
     % that the stream is at 0 position.
     % Making this consistently with resolveshading,
     % which applies ReusableStreamDecode filter
     % to the PS stream, which represents the
     % PDF stream in dynamics.

     dup /Shading knownoget {
       dup /ShadingType oget 4 ge {
         /DataSource knownoget {
           dup type /filetype eq {
             0 setfileposition
           } {
             pop
           } ifelse
         } if
       } {
        pop
       } ifelse
     } if

     % Associate pattern instance with the default qstate for the context.
     % A single pattren object can be reused in several contexts.
     dup DefaultQstate .knownget {
       exch pop
     } {
       % But don't update read-only initial null pattern.
       dup /PaintProc .knownget { //nullpatternproc ne } { //true } ifelse {
         dup dup /Matrix knownoget not { { 1 0 0 1 0 0 } } if
         gsave DefaultQstate setqstate makepattern grestore
         dup 3 1 roll
         DefaultQstate exch put
       } if
     } ifelse
     setcolor
   } bdef
end def
/setgcolor	% (null | <color...>) <colorspace> setgcolor -
 { 1 index //null eq
    { pop pop }
    { dup 0 get //Cdict exch get exec }
   ifelse
 } bdef
% Compare the old and new color spaces in an attempt to avoid expensive
% reloads of CIEBased color spaces.
/PCSdict 15 dict dup begin	% <colorspace> -proc- <colorspace|pdfcspace>
  /CIEBasedA { dup 1 get /PDFColorSpace .knownget { exch pop } if } bdef
  /CIEBasedABC /CIEBasedA load def
  /CIEBasedDEF /CIEBasedA load def
  /CIEBasedDEFG /CIEBasedA load def
  /Indexed {
    dup 1 get dup pdfcolorspace 2 copy ne { 3 1 roll } if pop pop
  } bdef
end def
/pdfcolorspace {	% <colorspace> pdfcolorspace <colorspace|pdfcspace>
  dup type /arraytype eq {
    //PCSdict 1 index 0 get .knownget { exec } if
  } if
} bdef
/setgcolorspace {	% <colorspace> setgcolorspace -
  dup pdfcolorspace currentcolorspace pdfcolorspace eq {
    pop
  } {
    setcolorspace
  } ifelse
} bdef
/fsexec		% <fillop|strokeop> fsexec -
 {
   SoftMask //null ne {
     mark /Subtype /Group /Isolated //true .dicttomark pathbbox .begintransparencygroup
   } if
   cvx exec
   SoftMask //null ne {
     .endtransparencygroup
   } if
 } bdef

% ---------------- Path painting and clipping ---------------- %

/S {
  OFFlevels length 0 eq {
    setstrokestate .swapcolors /stroke fsexec .swapcolors
  } {
    newpath
  } ifelse
} bdef

/f {
  OFFlevels length 0 eq {
    setfillstate /fill fsexec
  } {
    newpath
  } ifelse
} bdef

/f* {
  OFFlevels length 0 eq {
    setfillstate /eofill fsexec
  } {
    newpath
  } ifelse
} bdef

/n { newpath } bdef		% don't allow n to get bound in

/s { closepath S } bdef

/B {
  OFFlevels length 0 eq {
         PDFusingtransparency {
                % knockout trans group around the filled and stroked object
                mark
                /Isolated //true /Knockout //true
                .dicttomark
                % strokepath will return empty path (no currentpoint) if nothing is stroked
                gsave { strokepath pathbbox } stopped grestore not {
            1 .setopacityalpha
                        .begintransparencygroup
                        gsave setfillstate fill grestore
                        setstrokestate .swapcolors /stroke fsexec .swapcolors
                        .endtransparencygroup
                } { newpath pop } ifelse
         } {
                gsave setfillstate fill grestore
                setstrokestate .swapcolors /stroke fsexec .swapcolors
        } ifelse
  } {
    newpath
  } ifelse
} bdef

/b { closepath B } bdef

/B* {
  OFFlevels length 0 eq {
         PDFusingtransparency {
                % knockout trans group around the filled and stroked object
                mark
                /Isolated //true /Knockout //true
                .dicttomark
                % strokepath will return empty path (no currentpoint) if nothing is stroked
                gsave { strokepath pathbbox } stopped grestore not {
            1 .setopacityalpha
                        .begintransparencygroup
                        gsave setfillstate eofill grestore
                        setstrokestate .swapcolors /stroke fsexec .swapcolors
                        .endtransparencygroup
                } { newpath pop } ifelse
         } {
                gsave setfillstate eofill grestore
                setstrokestate .swapcolors /stroke fsexec .swapcolors
        } ifelse
  } {
    newpath
  } ifelse
} bdef

/b* { closepath B* } bdef

% Clipping:

/Wdict 4 dict dup begin
/S { OFFlevels length 0 eq { gsave setstrokestate .swapcolors stroke .swapcolors grestore } if n } bdef
/f { OFFlevels length 0 eq { gsave setfillstate fill grestore } if n } bdef
/f* { OFFlevels length 0 eq { gsave setfillstate eofill grestore } if n } bdef
/n { end { currentpoint } stopped not { pop pop clip } if newpath } bdef
end readonly def
/W { //Wdict begin } bdef
/W*dict 4 dict dup begin
Wdict { def } forall
/n { end { currentpoint } stopped not { pop pop eoclip } if newpath } bdef
end readonly def
/W* { //W*dict begin } bdef

% ---------------- Text control ---------------- %

/textbeginpage
 { /TextSpacing 0 def		% 0 Tc
   /TextLeading 0 def		% 0 TL
   /TextRenderingMode 0 def	% 0 Tr
   /TextRise 0 def		% 0 Ts
   /WordSpacing 0 def		% 0 Tw
   /TextHScaling 1.0 def	% 100 Tz
   /TextFont //null def
   /FontMatrixNonHV //false def
   /Show { showfirst } def
 } bdef

% Contrary to the statement in the PDF manual, BT and ET *can* be nested,
% if the CharProc for a Type 3 font does a BT/ET itself.
% Since we always call the CharProc inside a q/Q, we simply ensure that
% the text state is saved and restored like the rest of the extended
% graphics state.

/settextmatrix {
  TextMatrix concat
  TextHScaling 1 ne { TextHScaling 1 scale } if
  TextRise 0 ne { 0 TextRise translate } if
  TextFont dup //null eq { pop } { setfont } ifelse
} bdef
/settextstate {
        % The text state can be set even outside BT/ET.
  currentdict /TextSaveMatrix known {
    TextSaveMatrix setmatrix settextmatrix
  } if
} bdef
/settextposition {
                % Update the TextMatrix translation.
  gsave TextSaveMatrix setmatrix
  currentpoint TextRise sub TextMatrix 4 2 getinterval astore pop
                % We would like to do "grestore currentpoint translate"
                % here, but some PDF files set a singular text matrix
                % (0 0 0 0 <x> <y> Tm), so we can't do this.
  TextTempMatrix identmatrix setmatrix currentpoint
  grestore
  TextTempMatrix currentmatrix 4 2 getinterval astore pop
  TextTempMatrix setmatrix
} bdef

/BT {
  currentdict /TextLineMatrix .knownget
    { identmatrix pop TextMatrix identmatrix pop }
    { matrix /TextLineMatrix gput matrix /TextMatrix gput }
  ifelse
  { showfirst } /Show gput
  currentdict /TextSaveMatrix .knownget not {
    matrix dup /TextSaveMatrix gput
  } if currentmatrix pop settextmatrix
  matrix /TextTempMatrix gput		% see settextposition
} bdef
/ET {
  TextRenderingMode 4 ge { .currentfilladjust 0 .setfilladjust clip newpath .setfilladjust} if
  TextSaveMatrix setmatrix
  currentdict /TextSaveMatrix undef
} bdef
/Tc { /TextSpacing gput { showfirst } /Show gput } bdef
/TL { /TextLeading gput } bdef
/Tr { dup .settextrenderingmode /TextRenderingMode gput { showfirst } /Show gput } bdef
/Ts { /TextRise gput settextstate } bdef
/Tw { /WordSpacing gput { showfirst } /Show gput } bdef
/Tz { 100 div /TextHScaling gput settextstate} bdef

% ---------------- Font control ---------------- %

% Test if the FontMatrix could transform a horizontal/vertical (depending
% on writing mode) advance vector in glyph space into one with a different
% direction in text space.
% - if FontMatrix = [a b c d tx ty], this condition translates to:
%       b != 0 for horizontal writing mode
%       c != 0 for vertical writing mode
% - when false, we automatically have wy/x == 0 in text space whenever wy/x == 0
%   in glyph space, and can avoid the slow method that is otherwise necessary
%   to implement zeroing wy/x cf PDF Ref 5.3.3 "Text space details"
    % Worker procedure for testing a single font matrix
/?FontMatrixNonHV {		    % ?horz <<fontdict>> -- ?horz ?nonhv
    /FontMatrix .knownget {
        1 index { 1 } { 2 } ifelse get 0 ne
    } {
        //false
    } ifelse
} bdef
    % Worker procedure for recursive checking of font matrices
/?FontMatrixNonHV {		    % {self} ?horz <<font>> -- {self} ?horz ?nonhv
    2 copy //?FontMatrixNonHV exec {	    % check the font's own FontMatrix
        pop pop //true
    } {
        % look for descendents/ components
        pop				    % {self} ?horz <<font>>
        dup /FontType get
        dup 0 eq {			    % Type 0: look into FDepVector
            pop /FDepVector get 2 index	    % {self} ?horz [fonts..] {testproc}
        } {
            9 eq {			    % Type 9 (CIDFontType 0): check FDArray
                /FDArray get //?FontMatrixNonHV
            } {				    % all others: nothing more to check
                pop {} {}
            } ifelse
        } ifelse
        %stack: {self} ?horz [fonts..] {testproc}
        //false 5 2 roll {		    % {testproc} false {self} ?horz <<subfont>>
            4 index exec {
                4 -1 roll pop //true 4 1 roll
                exit
            } if
        } forall
        %stack: {testproc} ?nonhv {self} ?horz
        4 2 roll exch pop
    } ifelse
} bdef
    % Main procedure
/?FontMatrixNonHV {		% <<rootfont>> -- ?nonhv
    //?FontMatrixNonHV exch
    % determine WMode
    dup /WMode .knownget { 0 eq } { //true } ifelse % {proc} <<rootfont>> ?horz
    exch
    % call the worker procedure
    //?FontMatrixNonHV exec
    exch pop exch pop
} bdef

/Tf {		% <font> <scale> Tf -
  dup 0 eq {
    (\n   **** Warning: Invalid 0.0 font scale given for Tf ****\n)
    pdfformaterror
    pop 0.00000001	% handle invalid scale by using a really small value
  } if
  1 index type /dicttype ne {
    selectfont currentfont
  } {
    dup 1 eq { pop } { scalefont } ifelse
  }
  ifelse
  dup ?FontMatrixNonHV dup FontMatrixNonHV ne {
    /FontMatrixNonHV gput
    { showfirst } /Show gput
  } {
    pop
  } ifelse
  /TextFont gput settextstate
} bdef

% Copy a font, removing its FID.  If changed is true, also remove
% the UniqueID and XUID, if any.  If the original dictionary doesn't have
% the keys being removed, don't copy it.
/.copyfontdict		% <font> <changed> .copyfontdict <dict>
 { 1 index /FID known
   1 index { 2 index /UniqueID known or 2 index /XUID known or } if
    {		% We add 1 to the length just in case the original
                % didn't have a FID.
      exch dup length 1 add dict exch
       {		% Stack: changed newfont key value
         1 index /FID eq 4 index
          { 2 index /UniqueID eq or 2 index /XUID eq or }
         if not { 3 copy put } if pop pop
       }
      forall exch
    }
   if pop
 } bdef

% Insert a new Encoding or Metrics into a font if necessary.
% Return a possibly updated font, and a flag to indicate whether
% the font was actually copied.
/.updatefontmetrics {	% <font> <Metrics|null> .updatefontmetrics
                        %   <font'> <copied>
  dup //null ne {
    exch //true .copyfontdict dup /Metrics 4 -1 roll put //true
  } {
    pop //false
  } ifelse
} bdef

/.updatefontencoding {	% <font> <Encoding|null> .updatefontencoding
                        %   <font'> <copied>
  dup //null ne { dup 2 index /Encoding get ne } { //false } ifelse {
    exch //false .copyfontdict dup /Encoding 4 -1 roll put //true
  } {
    pop //false
  } ifelse
} bdef

% Duplicate keys in CharString dictionary according to GlyphMap: <</new_glyph /old_glyph>>
% We have to do this because PDF fonts can associate multiple widths with the same glyph
% but Metrics dictionary works by the glyph name.
/.update_charstring {	% <font> <GlyphMap> .update_charstring  <font'> <copied>
  dup //null ne {
    exch //true .copyfontdict       % map font
    dup dup /CharStrings get        % map font font cstr
    dup length                      % map font font cstr len
    4 index length add              % map font font cstr len+map_len
    dict copy dup begin             % map font font cstr'
    /CharStrings exch put           % map font
    exch {                          % font /new /old
      currentdict exch .knownget {
        def
      } {
        currentdict /.notdef .knownget {
          def
        } {
          pop
          % The font has no .notdef.
          % Could not resolve the conflict,
          % but either the font is invalid or the glyph name is never used.
        } ifelse
      } ifelse
    } forall
    end //true
  } {
    pop //false
  } ifelse
} bdef

/.updatefont {	      % <font> <Encoding|null> <Metrics|null> <GlyphMap|null>
                      %        .updatefont <font'> <copied>
  4 2 roll            % <Metrics|null> <GlyphMap> <font> <Encoding|null>
  .updatefontencoding % <Metrics|null> <GlyphMap> <font> bool
  4 1 roll exch       % bool <Metrics|null> <font> <GlyphMap>
  .update_charstring  % bool <Metrics|null> <font> bool
  3 1 roll exch       % bool bool <font> <Metrics|null>
  .updatefontmetrics  % bool bool <font> bool
  4 2 roll or or      % <font> is_copied
} bdef

% ---------------- Text positioning ---------------- %

/Td {
  TextLineMatrix transform TextLineMatrix 4 2 getinterval astore pop
  TextLineMatrix TextMatrix copy pop settextstate
} bdef
/TD { dup neg /TextLeading gput Td } bdef
/T* { 0 TextLeading neg Td } bdef
/Tm {
  TextLineMatrix astore TextMatrix copy pop settextstate
} bdef

% ---------------- Text painting ---------------- %

/Vexch {
  rootfont /WMode knownoget { 1 eq { exch } if } if
} bind def

/textrenderingprocs [		% (0 is handled specially)
        % Painting-only modes
   { tf } { tS } { tB } { tn }
        % Clipping modes
   { gsave tf grestore tW }
   { gsave tS grestore tW }
   { gsave tB grestore tW }
   { tW }
] readonly def

/pdfwrite_textrenderingprocs [
        % Tr 0 - Fill
        { setfillstate show } bind
        % Tr 1 - Stroke
        { currentlinewidth exch setstrokestate
        % Need to set the stroke width to a value which gives the correct
        % width under pdfwrite. Pdfwrite uses (in text mode) an identity
        % CTM, so we need to calculate the stroke width which would result
        % if the CTM had been unity.
          currentlinewidth dup
          matrix defaultmatrix idtransform TextSaveMatrix dtransform
          abs 2 copy exch abs eq {
            pop
          }{
            % non-square scaling reduces to Text matrix in pdfwrite , so
            % we can ignore it. (wrong answer, but consistent)
            pop pop currentlinewidth
          }ifelse setlinewidth
          show setlinewidth} bind
        % Tr 2 - Fill then Stroke
        { currentlinewidth exch setstrokestate
        % Need to set the stroke width to a value which gives the correct
        % width under pdfwrite. Pdfwrite uses (in text mode) an identity
        % CTM, so we need to calculate the stroke width which would result
        % if the CTM had been unity.
          currentlinewidth dup
          matrix defaultmatrix idtransform TextSaveMatrix dtransform
          abs 2 copy exch abs eq {
            pop
          }{
            % non-square scaling reduces to Text matrix in pdfwrite , so
            % we can ignore it. (wrong answer, but consistent)
            pop pop currentlinewidth
          }ifelse setlinewidth
          setfillstate show setlinewidth} bind
        % Tr 3 - Neither fill nor stroke
        { setfillstate show } bind
        %
        % pdfwrite emits all text inside a gsave/grestore pair. As
        % a result we can't preserve any of the 'clip' modes, as the
        % clip gets undone by the restore. We need to handle the clip
        % separately.
        %
        % Tr 4 - Fill, add to clip
        { gsave 0 .settextrenderingmode
          setfillstate dup show grestore //true charpath } bind
        % Tr 5 - Stroke, add to clip
        { gsave 1 .settextrenderingmode
          currentlinewidth dup
          matrix defaultmatrix idtransform TextSaveMatrix dtransform
          abs 2 copy exch abs eq {
            pop
          }{
            % non-square scaling reduces to Text matrix in pdfwrite , so
            % we can ignore it. (wrong answer, but consistent)
            pop pop currentlinewidth
          }ifelse setlinewidth
          setstrokestate dup show grestore
          //true charpath} bind
        % Tr 6 - Fill, stroke, add to clip
        { gsave 2 .settextrenderingmode
          currentlinewidth dup
          matrix defaultmatrix idtransform TextSaveMatrix dtransform
          abs 2 copy exch abs eq {
            pop
          }{
            % non-square scaling reduces to Text matrix in pdfwrite , so
            % we can ignore it. (wrong answer, but consistent)
            pop pop currentlinewidth
          }ifelse setlinewidth
          setstrokestate setfillstate dup show grestore
          //true charpath} bind
        % Tr 7 - Add to clip
        { //true charpath} bind
] readonly def

/setstrokeforTrpreservation {
      % Check to see if the current device supports Tr
      currentdevice 1 dict dup /PreserveTrMode dup put .getdeviceparams
      dup type /booleantype eq not {cleartomark //false}{3 1 roll cleartomark}ifelse
      {
        TextRenderingMode 1 eq TextRenderingMode 2 eq or
        TextRenderingMode 5 eq TextRenderingMode 6 eq or or {
          setstrokestate
          % Need to set the stroke width to a value which gives the correct
          % width under pdfwrite. Pdfwrite uses (in text mode) an identity
          % CTM, so we need to calculate the stroke width which would result
          % if the CTM had been unity. NOTE! Only interested in magnitudes,
          % not signs.
          currentlinewidth dup
          matrix defaultmatrix idtransform TextSaveMatrix dtransform
          abs 2 copy exch abs eq {
            pop
          }{
            % non-square scaling reduces to Text matrix in pdfwrite , so
            % we can ignore it. (wrong answer, but consistent)
            pop pop currentlinewidth
          }ifelse
          setlinewidth
      } if
    } if
} bind def

/setshowstate
 { WordSpacing 0 eq TextSpacing 0 eq and FontMatrixNonHV not and
    {
      % Check to see if the current device supports Tr
      currentdevice 1 dict dup /PreserveTrMode dup put .getdeviceparams
      dup type /booleantype eq not {cleartomark //false}{3 1 roll cleartomark}ifelse
      {
              pdfwrite_textrenderingprocs TextRenderingMode get
      }
      {
              TextRenderingMode 0 eq
              currentfont /FontType get 3 eq TextRenderingMode 3 eq not
              and or 
               {
                { setfillstate show }
              } {
                TextRenderingMode 3 eq {
                        % Some PDF files execute 'tm' with a singular matrix,
                        % and then use the text rendering mode 3.
                        % The graphics library currently cannot handle text
                        % operations when the CTM is singular.
                        % Work around this here.
                  {
                    matrix currentmatrix dup dup
                    dup 0 get 0 eq 1 index 1 get 0 eq and {
                      dup dup 2 get 0 eq { 0 }{ 1 } ifelse 1 put
                    } if
                    dup 2 get 0 eq 1 index 3 get 0 eq and {
                      dup dup 1 get 0 eq { 3 }{ 2 } ifelse 1 put
                    } if
                    setmatrix
                    currentpoint
                    4 index setfillstate show % Tr was set to graphic state.
                    moveto
                    setmatrix
                    % now set the currentpoint using the original matrix
                    gsave
                    setmatrix
                    //false charpath currentpoint newpath
                    grestore
                    moveto
                  }
                } {
                  { //false charpath textrenderingprocs TextRenderingMode get exec }
                } ifelse
              } ifelse
       } ifelse
    }
    {
      % If we are doing a plain old fill, or no text at all, *or* we are going to
      % a device supporting text rendering modes, then go through this route.
      %
      TextRenderingMode 0 eq TextRenderingMode 3 eq or
      
      currentfont /FontType get 3 eq or 

      currentdevice 1 dict dup /PreserveTrMode dup put .getdeviceparams
      dup type /booleantype eq not {cleartomark //false}{3 1 roll cleartomark}ifelse
      % pdfwrite can't handle rendering modes which involve clipping
      TextRenderingMode 4 lt and or
      % Tr was set to graphic state.
      {
        FontMatrixNonHV {
           {
             % preserve current line width around possible stroke setup
             currentlinewidth exch
             setstrokeforTrpreservation
             setfillstate
             [ TextSpacing WordSpacing 3 index
               {					    % str [... weach wword c undef|ythis xthis|undef
                 exch % will be removed, unless FontMatrix.xx/yy == 0 (FontMatrixNonHV already true)
                 Vexch pop                                  % str [... weach wword c wthis
                 3 index add exch 32 eq {1 index add} if    % str [... weach wword w
                 3 1 roll                                   % str [... w weach wword
               }
               % for the "exch" removed or not below, see comment in pdf_font.ps::getfontmetrics
               currentfont /FontMatrix get 0 3 Vexch pop get 0 ne {
                 1 1 index length 1 sub getinterval cvx
               } if
               cshow pop pop ]
             { xshow } { yshow } Vexch pop exec
             setlinewidth
           }
         } {
           WordSpacing 0 eq { 
             {
               { setstrokeforTrpreservation
                 setfillstate TextSpacing 0 Vexch 3 -1 roll ashow
               } 
               currentlinewidth
               { setlinewidth }
               3 .execn
             }  
           } {
              TextSpacing 0 eq { 
                { % preserve current line width around possible stroke setup
                  { setstrokeforTrpreservation
                    setfillstate WordSpacing 0 Vexch 32 4 -1 roll .pdfwidthshow
                  }
                  currentlinewidth
                  { setlinewidth }
                  3 .execn
                } 
              } { 
                { % preserve current line width around possible stroke setup
                  { setstrokeforTrpreservation
                    setfillstate WordSpacing 0 Vexch 32
                    TextSpacing 0 Vexch 6 -1 roll .pdfawidthshow
                  }
                  currentlinewidth
                  { setlinewidth }
                  3 .execn
                } 
              } ifelse
           } ifelse
         } ifelse
       }
       {
         { currentlinewidth exch
           WordSpacing TextSpacing
                        % Implement the combination of t3 and false charpath.
                        % Note that we must use cshow for this, because we
                        % can't parse multi-byte strings any other way.
                        % Stack: string wword wchar
            {
             exch % will be removed, unless FontMatrixNonHV && FontMatrix.xx/yy == 0
                        % Stack: str wword wchar ccode xthis ythis
             Vexch pop currentpoint 6 3 roll
                        % Stack: str wthis xorig yorig wword wchar ccode
             (x) dup 0 3 index put
             %
             % for devices which can handle the text rendering mode we don't want
             % to decompose into paths, we want to do a 'show'. However pdfwrite
             % can't handle clipping text, so we *do* want to do the clip path
             % as a 'true charpath'.
             %
             currentdevice 1 dict dup /PreserveTrMode dup put .getdeviceparams
             dup type /booleantype eq not {cleartomark //false}{3 1 roll cleartomark}ifelse {
               % NB we must have Tr at least 4 or the test above would have
               % taken a different path, so we *know* the Tr involves clipping
               % or we wouldn't be here. Subtract 4 from the Tr and preserve
               % that mode, then do a charpath so the clip path gets set up
               % correctly.
               gsave TextRenderingMode 4 sub .settextrenderingmode
               setstrokeforTrpreservation
               setstrokestate setfillstate dup show grestore} if
             //false charpath
             3 copy 32 eq { add } { exch pop } ifelse
                        % Stack: str wthis xorig yorig wword wchar ccode wextra
             7 -3 roll moveto add
             0 Vexch rmoveto pop
            }
            % for the "exch" removed or not below, see comment in pdf_font.ps::getfontmetrics
            FontMatrixNonHV dup not exch {
              currentfont /FontMatrix get 0 3 Vexch pop get 0 ne
            } if {
              1 1 index length 1 sub getinterval cvx
            } if
           4 -1 roll cshow pop pop
           %
           % If the device doesn't handle text rendering modes then we now have a suitable
           % path, so call the correct routine to stroke/fill it (clip is handled when we
           % get ET).
           %
           currentdevice 1 dict dup /PreserveTrMode dup put .getdeviceparams
           dup type /booleantype eq not {cleartomark //false}{3 1 roll cleartomark}ifelse not {
             textrenderingprocs TextRenderingMode get exec
           } if
           setlinewidth
         }
       }
      ifelse
    }
   ifelse /Show gput
 } bdef
/showfirst { setshowstate Show } def

/Tj {
  { 0 0 moveto Show settextposition }
  OFFlevels length 0 eq {
    exec
  } {
    gsave get-gs-attrs nulldevice set-gs-attrs
    exec
    get-gs-attrs grestore set-gs-attrs
  } ifelse
} bdef
/' { T* Tj } bdef
/" { exch Tc exch Tw T* Tj } bdef
/TJ {
  { 0 0 moveto {
      dup type /stringtype eq {
        Show
      } { -1000 div
        currentfont /ScaleMatrix .knownget { 0 get mul } if
        0 Vexch rmoveto
      } ifelse
    } forall settextposition
  }
  OFFlevels length 0 eq {
    exec
  } {
    gsave get-gs-attrs nulldevice set-gs-attrs
    exec
    get-gs-attrs grestore set-gs-attrs
  } ifelse
} bdef

/tf { setfillstate currentpoint fill moveto } bdef
/tn { currentpoint newpath moveto } bdef % Obsolete, never used.
% For stroking characters, temporarily restore the graphics CTM so that
% the line width will be transformed properly.
/Tmatrix matrix def
/tS
 { 
   currentfont /FontType get 3 eq
   {
     setfillstate currentpoint fill moveto
   }
   {
     setstrokestate
     currentpoint //Tmatrix currentmatrix TextSaveMatrix setmatrix .swapcolors stroke .swapcolors
     setmatrix moveto
   } ifelse
 } bdef

% Handle transparency the same as /B operator
/tB {
       PDFusingtransparency {
          % knockout trans group around the filled and stroked object
          mark
          /Isolated //true /Knockout //true
          .dicttomark
          1 .setopacityalpha
          % While text will always have a currentpoint, strokepath seems to mess with it.
          % we get the currentpoint, then use moveto to restore it for pathbbox
          gsave currentpoint strokepath moveto pathbbox grestore
          .begintransparencygroup
          gsave tf grestore tS
          .endtransparencygroup
        } {
          gsave tf grestore tS
        } ifelse
} bdef

% This does the wrong thing if there have been multiple text operations
% within a single BT/ET pair, but it's a start.
/tW { } bdef

% Text formatting and painting for the AcroForm field without appearance streams.
/Tform {                % <MaxLen> (V) <Ff> <Q> Tform -
  clippath pathbbox 4 2 roll pop pop                        % MaxLen (V) Ff Q dx dy
  currentfont /ScaleMatrix .knownget { 3 get } { 1 } ifelse % MaxLen (V) Ff Q dx dy yy
  currentfont /FontBBox get dup 1 get neg exch 3 get        % MaxLen (V) Ff Q dx dy yy desc asc
  dup 0 ne { div } { pop pop 0 } ifelse                     % MaxLen (V) Ff Q dx dy yy desc/asc
  1 index mul                                               % MaxLen (V) Ff Q dx dy yy desc/asc*yy

  4 index 16#1000 and 0 ne { % multiline
    8 { pop } repeat (Multiline form fields are not yet implemented.) =
  } {
    4 index 16#1000000 and 0 ne { % comb
      8 { pop } repeat (Combed form fields are not yet implemented.) =
    } { % plain text
      3 1 roll sub add 2 div             % MaxLen (V) Ff Q dx (dy-yy+desc)/2
      0 exch moveto                      % MaxLen (V) Ff Q dx
      1 index 0 ne {
        3 index stringwidth pop          % MaxLen (V) Ff Q dx w
        sub exch 1 eq { 2 div } { 2 sub } ifelse % MaxLen (V) Ff (dx-w)/2
        0 rmoveto                        % MaxLen (V) Ff
        pop                              % MaxLen (V)
      } {
        pop pop pop                      % MaxLen (V)
        2 0 rmoveto
      } ifelse
      exch pop Show                      % -
    } ifelse
  } ifelse
} bdef

end readonly put		% GS_PDF_ProcSet

.setglobal