/usr/share/psychtoolbox-3/PsychHardware/Daq/DaqCalls.m is in psychtoolbox-3-common 3.0.11.20140816.dfsg1-1.
This file is owned by root:root, with mode 0o644.
The actual contents of the file can be viewed below.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 | function DaqCalls
% Examples for each function in the Daq Toolbox.
% * Analog input/output commands
% [data,params]=DaqAIn(DeviceIndex,options); % Read analog in (works)
% [data,params]=DaqAInScan(DeviceIndex,options); % Scan analog channels (works)
% err=DaqAInStop(DeviceIndex); % Stop input scan (works)
% params=DaqAInScanBegin(DeviceIndex,options); % Begin sampling. (works)
% params=DaqAInScanContinue(DeviceIndex,options); % Continue sampling: transfer data from Mac OS to PsychHID. (works)
% [data,params]=DaqAInScanEnd(DeviceIndex,options); % End sampling: data are returned. (works)
% err=DaqALoadQueue(DeviceIndex,channel,gain); % Set channel gains (works)
% err=DaqAOut(DeviceIndex,channel,v); % Write analog out (does not work with 1608FS -- no analog output)
% params=DaqAOutScan(DeviceIndex,v,options); % Clocked analog out (does not work with 1608FS -- no analog output)
% err=DaqAOutStop(DeviceIndex); % Stop output scan (does not work with 1608FS -- no analog output)
%
% * Digital input/output commands
% err=DaqDConfigPort(DeviceIndex,port,direction); % Configure digital port (works)
% data=DaqDIn(DeviceIndex); % Read digital ports (works)
% err=DaqDOut(DeviceIndex,port,data); % Write digital port (works)
% err=DaqDConfigPortBit(DeviceIndex,BitNo,direction);% Configure individual port bits (works on 1608FS only; also beware: physical input overrides config)
% BitValue=DaqDReadBit(DeviceIndex,BitNo); % Read single bit from digital port (works on 1608FS only)
% err=DaqDWriteBit(DeviceIndex,BitNo); % Write single bit to digital port (works on 1608FS only)
%
% * Miscellaneous commands
% daq=DaqDeviceIndex; % Get reference(s) to our device(s); (works)
% daq=DaqFind; % Return DeviceIndex iff one device is connected (works)
% err=DaqBlinkLED(DeviceIndex); % Cause LED to blink (works)
% err=DaqCInit(DeviceIndex); % Initialize counter (works)
% count=DaqCIn(DeviceIndex); % Read counter (works)
% data=DaqGetAll(DeviceIndex); % Retrieve all analog and digital input values (does not work on 1608FS)
% status=DaqGetStatus(DeviceIndex); % Retrieve device status (works)
% err=DaqReset(DeviceIndex); % Reset the device (sort of works)
% err=DaqSetCal(DeviceIndex,on); % Set CAL output (works)
% DaqCalibrateAIn(DeviceIndex,channel); % Compare input/output and write calibration data to file (1608FS only)
% err=DaqSetSync(DeviceIndex,type); % Configure sync (works)
% err=DaqSetTrigger(DeviceIndex,rising); % Configure ext. trigger (works)
%
% * Memory commands
% data=DaqMemRead(DeviceIndex,address,bytes); % Read memory (works)
% err=DaqMemWrite(DeviceIndex,address,data); % Write memory (works)
% data=DaqReadCode(DeviceIndex,address,bytes); % Read program memory (works)
% err=DaqPrepareDownload(DeviceIndex); % Prepare for program memory download (works)
% err=DaqWriteCode(DeviceIndex,address,data); % Write program memory (not adequately tested)
% For 1608 DaqWriteCode probably cannot work except in conjunction with a DaqUpdateCode function no one has written
% err=DaqWriteSerialNumber(DeviceIndex,serialstring);% Write a new serial number to device (not adequately tested)
%
% See also Daq, DaqFunctions, DaqCodes, DaqPins, and DaqHelp.
return;
|