request-tracker4 4.2.8-3+deb8u3 / usr / sbin / rt-setup-fulltext-index-4

#!/usr/bin/perl
# BEGIN BPS TAGGED BLOCK {{{
#
# COPYRIGHT:
#
# This software is Copyright (c) 1996-2014 Best Practical Solutions, LLC
#                                          <sales@bestpractical.com>
#
# (Except where explicitly superseded by other copyright notices)
#
#
# LICENSE:
#
# This work is made available to you under the terms of Version 2 of
# the GNU General Public License. A copy of that license should have
# been provided with this software, but in any event can be snarfed
# from www.gnu.org.
#
# This work is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
# 02110-1301 or visit their web page on the internet at
# http://www.gnu.org/licenses/old-licenses/gpl-2.0.html.
#
#
# CONTRIBUTION SUBMISSION POLICY:
#
# (The following paragraph is not intended to limit the rights granted
# to you to modify and distribute this software under the terms of
# the GNU General Public License and is only of importance to you if
# you choose to contribute your changes and enhancements to the
# community by submitting them to Best Practical Solutions, LLC.)
#
# By intentionally submitting any modifications, corrections or
# derivatives to this work, or any other work intended for use with
# Request Tracker, to Best Practical Solutions, LLC, you confirm that
# you are the copyright holder for those contributions and you grant
# Best Practical Solutions,  LLC a nonexclusive, worldwide, irrevocable,
# royalty-free, perpetual, license to use, copy, create derivative
# works based on those contributions, and sublicense and distribute
# those contributions and any derivatives thereof.
#
# END BPS TAGGED BLOCK }}}
use strict;
use warnings;
no warnings 'once';

# fix lib paths, some may be relative
BEGIN { # BEGIN RT CMD BOILERPLATE
    require File::Spec;
    require Cwd;
    my @libs = ("/usr/share/request-tracker4/lib", "/usr/local/share/request-tracker4/lib");
    my $bin_path;

    for my $lib (@libs) {
        unless ( File::Spec->file_name_is_absolute($lib) ) {
            $bin_path ||= ( File::Spec->splitpath(Cwd::abs_path(__FILE__)) )[1];
            $lib = File::Spec->catfile( $bin_path, File::Spec->updir, $lib );
        }
        unshift @INC, $lib;
    }

}

BEGIN {
    use RT;
    RT::LoadConfig();
    RT::Init();
};
use RT::Interface::CLI ();

my %DB = (
    type           => scalar RT->Config->Get('DatabaseType'),
    user           => scalar RT->Config->Get('DatabaseUser'),
    admin          => scalar RT->Config->Get('DatabaseAdmin'),
    admin_password => undef,
);

my %OPT = (
    help        => 0,
    ask         => 1,
    dryrun      => 0,
    attachments => 1,
);

my %DEFAULT;
if ( $DB{'type'} eq 'Pg' ) {
    %DEFAULT = (
        table  => 'Attachments',
        column => 'ContentIndex',
    );
}
elsif ( $DB{'type'} eq 'mysql' ) {
    %DEFAULT = (
        table => 'AttachmentsIndex',
    );
}
elsif ( $DB{'type'} eq 'Oracle' ) {
    %DEFAULT = (
        prefix => 'rt_fts_',
    );
}

use Getopt::Long qw(GetOptions);
GetOptions(
    'h|help!'        => \$OPT{'help'},
    'ask!'           => \$OPT{'ask'},
    'dry-run!'       => \$OPT{'dryrun'},
    'attachments!'   => \$OPT{'attachments'},

    'table=s'        => \$OPT{'table'},
    'column=s'       => \$OPT{'column'},
    'url=s'          => \$OPT{'url'},
    'maxmatches=i'   => \$OPT{'maxmatches'},
    'index-type=s'   => \$OPT{'index-type'},

    'dba=s'          => \$DB{'admin'},
    'dba-password=s' => \$DB{'admin_password'},
) or show_help();

if ( $OPT{'help'} || (!$DB{'admin'} && $DB{'type'} eq 'Oracle' ) ) {
    show_help( !$OPT{'help'} );
}

my $dbh = $RT::Handle->dbh;
$dbh->{'RaiseError'} = 1;
$dbh->{'PrintError'} = 1;

if ( $DB{'type'} eq 'mysql' ) {
    check_sphinx();
    my $table = $OPT{'table'} || prompt(
        message => "Enter name of a new MySQL table that will be used to connect to the\n"
                 . "Sphinx server:",
        default => $DEFAULT{'table'},
        silent  => !$OPT{'ask'},
    );

    my $url = 'sphinx://localhost:3312/rt';
    my $version = ($dbh->selectrow_array("show variables like 'version'"))[1];
    $url = 'sphinx://127.0.0.1:3312/rt'
        if $version and $version =~ /^(\d+\.\d+)/ and $1 >= 5.5;

    $url = $OPT{'url'} || prompt(
        message => "Enter URL of the sphinx search server; this should be of the form\n"
                 . "sphinx://<server>:<port>/<index name>",
        default => $url,
        silent  => !$OPT{'ask'},
    );
    my $maxmatches = $OPT{'maxmatches'} || prompt(
        message => "Maximum number of matches to return; this is the maximum number of\n"
                 . "attachment records returned by the search, not the maximum number\n"
                 . "of tickets.  Both your RT_SiteConfig.pm and your sphinx.conf must\n"
                 . "agree on this value.  Larger values cause your Sphinx server to\n"
                 . "consume more memory and CPU time per query.",
        default => 10000,
        silent  => !$OPT{'ask'},
    );

    my $schema = <<END;
CREATE TABLE $table (
    id     BIGINT NOT NULL,
    weight INTEGER NOT NULL,
    query  VARCHAR(3072) NOT NULL,
    INDEX(query)
) ENGINE=SPHINX CONNECTION="$url" CHARACTER SET utf8
END

    do_error_is_ok( dba_handle() => "DROP TABLE $table" )
        unless $OPT{'dryrun'};
    insert_schema( $schema );

    print_rt_config( Table => $table, MaxMatches => $maxmatches );

    require URI;
    my $urlo = URI->new( $url );
    my ($host, $port)  = split /:/, $urlo->authority;
    my $index = $urlo->path;
    $index =~ s{^/+}{};

    my $var_path = $RT::VarPath;

    my %sphinx_conf = ();
    $sphinx_conf{'host'} = RT->Config->Get('DatabaseHost');
    $sphinx_conf{'db'}   = RT->Config->Get('DatabaseName');
    $sphinx_conf{'user'} = RT->Config->Get('DatabaseUser');
    $sphinx_conf{'pass'} = RT->Config->Get('DatabasePassword');

    print <<END

Below is a simple Sphinx configuration which can be used to index all
text/plain attachments in your database.  This configuration is not
ideal; you should read the Sphinx documentation to understand how to
configure it to better suit your needs.

source rt {
    type            = mysql

    sql_host        = $sphinx_conf{'host'}
    sql_db          = $sphinx_conf{'db'}
    sql_user        = $sphinx_conf{'user'}
    sql_pass        = $sphinx_conf{'pass'}

    sql_query_pre   = SET NAMES utf8
    sql_query       = \\
        SELECT a.id, a.content FROM Attachments a \\
        JOIN Transactions txn ON a.TransactionId = txn.id AND txn.ObjectType = 'RT::Ticket' \\
        JOIN Tickets t ON txn.ObjectId = t.id \\
        WHERE a.ContentType = 'text/plain' AND t.Status != 'deleted'

    sql_query_info  = SELECT * FROM Attachments WHERE id=\$id
}

index $index {
    source                  = rt
    path                    = $var_path/sphinx/index
    docinfo                 = extern
    charset_type            = utf-8
}

indexer {
    mem_limit               = 32M
}

searchd {
    port                    = $port
    log                     = $var_path/sphinx/searchd.log
    query_log               = $var_path/sphinx/query.log
    read_timeout            = 5
    max_children            = 30
    pid_file                = $var_path/sphinx/searchd.pid
    max_matches             = $maxmatches
    seamless_rotate         = 1
    preopen_indexes         = 0
    unlink_old              = 1
}

END

}
elsif ( $DB{'type'} eq 'Pg' ) {
    check_tsvalue();
    my $table = $OPT{'table'} || prompt(
        message => "Enter the name of a DB table that will be used to store the Pg tsvector.\n"
                 . "You may either use the existing Attachments table, or create a new\n"
                 . "table.",
        default => $DEFAULT{'table'},
        silent  => !$OPT{'ask'},
    );
    my $column = $OPT{'column'} || prompt(
        message => 'Enter the name of a column that will be used to store the Pg tsvector:',
        default => $DEFAULT{'column'},
        silent  => !$OPT{'ask'},
    );

    my $schema;
    my $drop;
    if ( lc($table) eq 'attachments' ) {
        $drop = "ALTER TABLE $table DROP COLUMN $column";
        $schema = "ALTER TABLE $table ADD COLUMN $column tsvector";
    } else {
        $drop = "DROP TABLE $table";
        $schema = "CREATE TABLE $table ( "
            ."id INTEGER NOT NULL,"
            ."$column tsvector )";
    }

    my $index_type = lc($OPT{'index-type'} || '');
    while ( $index_type ne 'gist' and $index_type ne 'gin' ) {
        $index_type = lc prompt(
            message => "You may choose between GiST or GIN indexes; the former is several times\n"
                     . "slower to search, but takes less space on disk and is faster to update.",
            default => 'GiST',
            silent  => !$OPT{'ask'},
        );
    }

    do_error_is_ok( dba_handle() => $drop )
        unless $OPT{'dryrun'};
    insert_schema( $schema );
    insert_schema("CREATE INDEX ${column}_idx ON $table USING $index_type($column)");

    print_rt_config( Table => $table, Column => $column );
}
elsif ( $DB{'type'} eq 'Oracle' ) {
    {
        my $dbah = dba_handle();
        do_print_error( $dbah => 'GRANT CTXAPP TO '. $DB{'user'} );
        do_print_error( $dbah => 'GRANT EXECUTE ON CTXSYS.CTX_DDL TO '. $DB{'user'} );
    }

    my %PREFERENCES = (
        datastore => {
            type => 'DIRECT_DATASTORE',
        },
        filter => {
            type => 'AUTO_FILTER',
#        attributes => {
#            timeout => 120, # seconds
#            timeout_type => 'HEURISTIC', # or 'FIXED'
#        },
        },
        lexer => {
            type => 'WORLD_LEXER',
        },
        word_list => {
            type => 'BASIC_WORDLIST',
            attributes => {
                stemmer => 'AUTO',
                fuzzy_match => 'AUTO',
#            fuzzy_score => undef,
#            fuzzy_numresults => undef,
#            substring_index => undef,
#            prefix_index => undef,
#            prefix_length_min => undef,
#            prefix_length_max => undef,
#            wlidcard_maxterms => undef,
            },
        },
        'section_group' => {
            type => 'NULL_SECTION_GROUP',
        },

        storage => {
            type => 'BASIC_STORAGE',
            attributes => {
                R_TABLE_CLAUSE => 'lob (data) store as (cache)',
                I_INDEX_CLAUSE => 'compress 2',
            },
        },
    );

    my @params = ();
    push @params, ora_create_datastore( %{ $PREFERENCES{'datastore'} } );
    push @params, ora_create_filter( %{ $PREFERENCES{'filter'} } );
    push @params, ora_create_lexer( %{ $PREFERENCES{'lexer'} } );
    push @params, ora_create_word_list( %{ $PREFERENCES{'word_list'} } );
    push @params, ora_create_stop_list();
    push @params, ora_create_section_group( %{ $PREFERENCES{'section_group'} } );
    push @params, ora_create_storage( %{ $PREFERENCES{'storage'} } );

    my $index_params = join "\n", @params;
    my $index_name = $DEFAULT{prefix} .'index';
    do_error_is_ok( $dbh => "DROP INDEX $index_name" )
        unless $OPT{'dryrun'};
    $dbh->do(
        "CREATE INDEX $index_name ON Attachments(Content)
        indextype is ctxsys.context parameters('
            $index_params
        ')",
    ) unless $OPT{'dryrun'};

    print_rt_config( IndexName => $index_name );
}
else {
    die "Full-text indexes on $DB{type} are not yet supported";
}

sub check_tsvalue {
    my $dbh = $RT::Handle->dbh;
    my $fts = ($dbh->selectrow_array(<<EOQ))[0];
SELECT 1 FROM information_schema.routines WHERE routine_name = 'plainto_tsquery'
EOQ
    unless ($fts) {
        print STDERR <<EOT;

Your PostgreSQL server does not include full-text support.  You will
need to upgrade to PostgreSQL version 8.3 or higher to use full-text
indexing.

EOT
        exit 1;
    }
}

sub check_sphinx {
    return if $RT::Handle->CheckSphinxSE;

    print STDERR <<EOT;

Your MySQL server has not been compiled with the Sphinx storage engine
(sphinxse).  You will need to recompile MySQL according to the
instructions in Sphinx's documentation at
http://sphinxsearch.com/docs/current.html#sphinxse-installing

EOT
    exit 1;
}

sub ora_create_datastore {
    return sprintf 'datastore %s', ora_create_preference(
        @_,
        name => 'datastore',
    );
}

sub ora_create_filter {
    my $res = '';
    $res .= sprintf "format column %s\n", ora_create_format_column();
    $res .= sprintf 'filter %s', ora_create_preference(
        @_,
        name => 'filter',
    );
    return $res;
}

sub ora_create_lexer {
    return sprintf 'lexer %s', ora_create_preference(
        @_,
        name => 'lexer',
    );
}

sub ora_create_word_list {
    return sprintf 'wordlist %s', ora_create_preference(
        @_,
        name => 'word_list',
    );
}

sub ora_create_stop_list {
    my $file = shift || 'etc/stopwords/en.txt';
    return '' unless -e $file;

    my $name = $DEFAULT{'prefix'} .'stop_list';
    unless ($OPT{'dryrun'}) {
        do_error_is_ok( $dbh => 'begin ctx_ddl.drop_stoplist(?); end;', $name );

        $dbh->do(
            'begin ctx_ddl.create_stoplist(?, ?);  end;',
            undef, $name, 'BASIC_STOPLIST'
        );

        open( my $fh, '<:utf8', $file )
            or die "couldn't open file '$file': $!";
        while ( my $word = <$fh> ) {
            chomp $word;
            $dbh->do(
                'begin ctx_ddl.add_stopword(?, ?); end;',
                undef, $name, $word
            );
        }
        close $fh;
    }
    return sprintf 'stoplist %s', $name;
}

sub ora_create_section_group {
    my %args = @_;
    my $name = $DEFAULT{'prefix'} .'section_group';
    unless ($OPT{'dryrun'}) {
        do_error_is_ok( $dbh => 'begin ctx_ddl.drop_section_group(?); end;', $name );
        $dbh->do(
            'begin ctx_ddl.create_section_group(?, ?);  end;',
            undef, $name, $args{'type'}
        );
    }
    return sprintf 'section group %s', $name;
}

sub ora_create_storage {
    return sprintf 'storage %s', ora_create_preference(
        @_,
        name => 'storage',
    );
}

sub ora_create_format_column {
    my $column_name = 'ContentOracleFormat';
    return $column_name if $OPT{'dryrun'};
    unless (
        $dbh->column_info(
            undef, undef, uc('Attachments'), uc( $column_name )
        )->fetchrow_array
    ) {
        $dbh->do(qq{
            ALTER TABLE Attachments ADD $column_name VARCHAR2(10)
        });
    }

    my $detect_format = qq{
        CREATE OR REPLACE FUNCTION $DEFAULT{prefix}detect_format_simple(
            parent IN NUMBER,
            type IN VARCHAR2,
            encoding IN VARCHAR2,
            fname IN VARCHAR2
        )
        RETURN VARCHAR2
        AS
            format VARCHAR2(10);
        BEGIN
            format := CASE
    };
    unless ( $OPT{'attachments'} ) {
        $detect_format .= qq{
                WHEN fname IS NOT NULL THEN 'ignore'
        };
    }
    $detect_format .= qq{
                WHEN type = 'text' THEN 'text'
                WHEN type = 'text/rtf' THEN 'ignore'
                WHEN type LIKE 'text/%' THEN 'text'
                WHEN type LIKE 'message/%' THEN 'text'
                ELSE 'ignore'
            END;
            RETURN format;
        END;
    };
    ora_create_procedure( $detect_format );

    $dbh->do(qq{
        UPDATE Attachments
        SET $column_name = $DEFAULT{prefix}detect_format_simple(
            Parent,
            ContentType, ContentEncoding,
            Filename
        )
        WHERE $column_name IS NULL
    });
    $dbh->do(qq{
        CREATE OR REPLACE TRIGGER $DEFAULT{prefix}set_format
        BEFORE INSERT
        ON Attachments
        FOR EACH ROW
        BEGIN
            :new.$column_name := $DEFAULT{prefix}detect_format_simple(
                :new.Parent,
                :new.ContentType, :new.ContentEncoding,
                :new.Filename
            );
        END;
    });
    return $column_name;
}

sub ora_create_preference {
    my %info = @_;
    my $name = $DEFAULT{'prefix'} . $info{'name'};
    return $name if $OPT{'dryrun'};
    do_error_is_ok( $dbh => 'begin ctx_ddl.drop_preference(?); end;', $name );
    $dbh->do(
        'begin ctx_ddl.create_preference(?, ?);  end;',
        undef, $name, $info{'type'}
    );
    return $name unless $info{'attributes'};

    while ( my ($attr, $value) = each %{ $info{'attributes'} } ) {
        $dbh->do(
            'begin ctx_ddl.set_attribute(?, ?, ?);  end;',
            undef, $name, $attr, $value
        );
    }

    return $name;
}

sub ora_create_procedure {
    my $text = shift;

    return if $OPT{'dryrun'};
    my $status = $dbh->do($text, { RaiseError => 0 });

    # Statement succeeded
    return if $status;

    if ( 6550 != $dbh->err ) {
        # Utter failure
        die $dbh->errstr;
    }
    else {
        my $msg = $dbh->func( 'plsql_errstr' );
        die $dbh->errstr if !defined $msg;
        die $msg if $msg;
    }
}

sub dba_handle {
    if ( $DB{'type'} eq 'Oracle' ) {
        $ENV{'NLS_LANG'} = "AMERICAN_AMERICA.AL32UTF8";
        $ENV{'NLS_NCHAR'} = "AL32UTF8";
    }
    my $dsn = do { my $h = new RT::Handle; $h->BuildDSN; $h->DSN };
    my $dbh = DBI->connect(
        $dsn, $DB{admin}, $DB{admin_password},
        { RaiseError => 1, PrintError => 1 },
    );
    unless ( $dbh ) {
        die "Failed to connect to $dsn as user '$DB{admin}': ". $DBI::errstr;
    }
    return $dbh;
}

sub do_error_is_ok {
    my $dbh = shift;
    local $dbh->{'RaiseError'} = 0;
    local $dbh->{'PrintError'} = 0;
    return $dbh->do(shift, undef, @_);
}

sub do_print_error {
    my $dbh = shift;
    local $dbh->{'RaiseError'} = 0;
    local $dbh->{'PrintError'} = 1;
    return $dbh->do(shift, undef, @_);
}

sub prompt {
    my %args = ( @_ );
    return $args{'default'} if $args{'silent'};

    local $| = 1;
    print $args{'message'};
    if ( $args{'default'} ) {
        print "\n[". $args{'default'} .']: ';
    } else {
        print ":\n";
    }

    my $res = <STDIN>;
    chomp $res;
    print "\n";
    return $args{'default'} if !$res && $args{'default'};
    return $res;
}

sub verbose  { print @_, "\n" if $OPT{verbose} || $OPT{verbose}; 1 }
sub debug    { print @_, "\n" if $OPT{debug}; 1 }
sub error    { $RT::Logger->error( @_ ); verbose(@_); 1 }
sub warning  { $RT::Logger->warning( @_ ); verbose(@_); 1 }

sub show_help {
    my $error = shift;
    RT::Interface::CLI->ShowHelp(
        ExitValue => $error,
        Sections => 'NAME|DESCRIPTION',
    );
}

sub print_rt_config {
    my %args = @_;
    my $config = <<END;

You can now configure RT to use the newly-created full-text index by
adding the following to your RT_SiteConfig.pm:

Set( %FullTextSearch,
    Enable     => 1,
    Indexed    => 1,
END

    $config .= sprintf("    %-10s => '$args{$_}',\n",$_)
        foreach grep defined $args{$_}, keys %args;
    $config .= ");\n";

    print $config;
}

sub insert_schema {
    my $dbh = dba_handle();
    my $message = "Going to run the following in the DB:";
    my $schema = shift;
    print "$message\n";
    my $disp = $schema;
    $disp =~ s/^/    /mg;
    print "$disp\n\n";
    return if $OPT{'dryrun'};

    my $res = $dbh->do( $schema );
    unless ( $res ) {
        die "Couldn't run DDL query: ". $dbh->errstr;
    }
}

=head1 NAME

rt-setup-fulltext-index - Create indexes for full text search

=head1 DESCRIPTION

This script creates the appropriate tables, columns, functions, and / or
views necessary for full-text searching for your database type.  It will
drop any existing indexes in the process.

Please read F<docs/full_text_indexing.pod> for complete documentation on
full-text indexing for your database type.

If you have a non-standard database administrator user or password, you
may use the C<--dba> and C<--dba-password> parameters to set them
explicitly:

    rt-setup-fulltext-index --dba sysdba --dba-password 'secret'

To test what will happen without running any DDL, pass the C<--dryrun>
flag.

The Oracle index determines which content-types it will index at
creation time. By default, textual message bodies and textual uploaded
attachments (attachments with filenames) are indexed; to ignore textual
attachments, pass the C<--no-attachments> flag when the index is
created.


=head1 AUTHOR

Ruslan Zakirov E<lt>ruz@bestpractical.comE<gt>,
Alex Vandiver E<lt>alexmv@bestpractical.comE<gt>

=cut