libspandsp-dev 0.0.6-2+b2 / usr / include / spandsp / sig_tone.h

/*
 * SpanDSP - a series of DSP components for telephony
 *
 * sig_tone.h - Signalling tone processing for the 2280Hz, 2400Hz, 2600Hz
 *              and similar signalling tones used in older protocols.
 *
 * Written by Steve Underwood <steveu@coppice.org>
 *
 * Copyright (C) 2004 Steve Underwood
 *
 * All rights reserved.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU Lesser General Public License version 2.1,
 * as published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU Lesser General Public License for more details.
 *
 * You should have received a copy of the GNU Lesser General Public
 * License along with this program; if not, write to the Free Software
 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 */

/*! \file */

/*! \page sig_tone_page The 2280/2400/2600Hz signalling tone processor
\section sig_tone_sec_1 What does it do?
The signalling tone processor handles the 2280Hz, 2400Hz and 2600Hz tones, used
in many analogue signalling procotols, and digital ones derived from them.

\section sig_tone_sec_2 How does it work?
Most single and two voice frequency signalling systems share many features, as these
features have developed in similar ways over time, to address the limitations of
early tone signalling systems.

The usual practice is to start the generation of tone at a high energy level, so a
strong signal is available at the receiver, for crisp tone detection. If the tone
remains on for a significant period, the energy level is reduced, to minimise crosstalk.
During the signalling transitions, only the tone is sent through the channel, and the media
signal is suppressed. This means the signalling receiver has a very clean signal to work with,
allowing for crisp detection of the signalling tone. However, when the signalling tone is on
for extended periods, there may be supervisory information in the media signal, such as voice
announcements. To allow these to pass through the system, the signalling tone is mixed with
the media signal. It is the job of the signalling receiver to separate the signalling tone
and the media. The necessary filtering may degrade the quality of the voice signal, but at
least supervisory information may be heard.
*/

#if !defined(_SPANDSP_SIG_TONE_H_)
#define _SPANDSP_SIG_TONE_H_

/* The optional tone sets */
enum
{
    /*! European 2280Hz signalling tone. Tone 1 is 2280Hz. Tone 2 is not used. */
    SIG_TONE_2280HZ = 1,
    /*! US 2600Hz signalling tone. Tone 1 is 2600Hz. Tone 2 is not used. */
    SIG_TONE_2600HZ,
    /*! US 2400Hz + 2600Hz signalling tones. Tone 1 is 2600Hz. Tone 2 is 2400Hz. */
    SIG_TONE_2400HZ_2600HZ
};

/* Mode control and report bits for transmit and receive */
enum
{
    /*! Signalling tone 1 is present */
    SIG_TONE_1_PRESENT          = 0x001,
    /*! Signalling tone 1 has changed state (ignored when setting tx mode) */
    SIG_TONE_1_CHANGE           = 0x002,
    /*! Signalling tone 2 is present */
    SIG_TONE_2_PRESENT          = 0x004,
    /*! Signalling tone 2 has changed state (ignored when setting tx mode) */
    SIG_TONE_2_CHANGE           = 0x008,
    /*! The media signal is passing through. Tones might be added to it. */
    SIG_TONE_TX_PASSTHROUGH     = 0x010,
    /*! The media signal is passing through. Tones might be extracted from it, if detected. */
    SIG_TONE_RX_PASSTHROUGH     = 0x040,
    /*! Force filtering of the signalling tone, whether signalling is being detected or not.
        This is mostly useful for test purposes. */
    SIG_TONE_RX_FILTER_TONE     = 0x080,
    /*! Request an update of the transmit status, upon timeout of the previous status. */
    SIG_TONE_TX_UPDATE_REQUEST  = 0x100,
    /*! Request an update of the receiver status, upon timeout of the previous status. */
    SIG_TONE_RX_UPDATE_REQUEST  = 0x200
};

typedef struct sig_tone_tx_state_s sig_tone_tx_state_t;

typedef struct sig_tone_rx_state_s sig_tone_rx_state_t;

#if defined(__cplusplus)
extern "C"
{
#endif

/*! Process a block of received audio samples.
    \brief Process a block of received audio samples.
    \param s The signalling tone context.
    \param amp The audio sample buffer.
    \param len The number of samples in the buffer.
    \return The number of samples unprocessed. */
SPAN_DECLARE(int) sig_tone_rx(sig_tone_rx_state_t *s, int16_t amp[], int len);

/*! Set the receive mode.
    \brief Set the receive mode.
    \param s The signalling tone context.
    \param mode The new mode for the receiver.
    \param duration The duration for this mode, before an update is requested.
                    A duration of zero means forever. */
SPAN_DECLARE(void) sig_tone_rx_set_mode(sig_tone_rx_state_t *s, int mode, int duration);

/*! Initialise a signalling tone receiver context.
    \brief Initialise a signalling tone context.
    \param s The signalling tone context.
    \param tone_type The type of signalling tone.
    \param sig_update Callback function to handle signalling updates.
    \param user_data An opaque pointer.
    \return A pointer to the signalling tone context, or NULL if there was a problem. */
SPAN_DECLARE(sig_tone_rx_state_t *) sig_tone_rx_init(sig_tone_rx_state_t *s, int tone_type, tone_report_func_t sig_update, void *user_data);

/*! Release a signalling tone receiver context.
    \brief Release a signalling tone receiver context.
    \param s The signalling tone context.
    \return 0 for OK */
SPAN_DECLARE(int) sig_tone_rx_release(sig_tone_rx_state_t *s);

/*! Free a signalling tone receiver context.
    \brief Free a signalling tone receiver context.
    \param s The signalling tone context.
    \return 0 for OK */
SPAN_DECLARE(int) sig_tone_rx_free(sig_tone_rx_state_t *s);

/*! Generate a block of signalling tone audio samples.
    \brief Generate a block of signalling tone audio samples.
    \param s The signalling tone context.
    \param amp The audio sample buffer.
    \param len The number of samples to be generated.
    \return The number of samples actually generated. */
SPAN_DECLARE(int) sig_tone_tx(sig_tone_tx_state_t *s, int16_t amp[], int len);

/*! Set the tone mode.
    \brief Set the tone mode.
    \param s The signalling tone context.
    \param mode The new mode for the transmitted tones.
    \param duration The duration for this mode, before an update is requested.
                    A duration of zero means forever. */
SPAN_DECLARE(void) sig_tone_tx_set_mode(sig_tone_tx_state_t *s, int mode, int duration);

/*! Initialise a signalling tone transmitter context.
    \brief Initialise a signalling tone context.
    \param s The signalling tone context.
    \param tone_type The type of signalling tone.
    \param sig_update Callback function to handle signalling updates.
    \param user_data An opaque pointer.
    \return A pointer to the signalling tone context, or NULL if there was a problem. */
SPAN_DECLARE(sig_tone_tx_state_t *) sig_tone_tx_init(sig_tone_tx_state_t *s, int tone_type, tone_report_func_t sig_update, void *user_data);

/*! Release a signalling tone transmitter context.
    \brief Release a signalling tone transmitter context.
    \param s The signalling tone context.
    \return 0 for OK */
SPAN_DECLARE(int) sig_tone_tx_release(sig_tone_tx_state_t *s);

/*! Free a signalling tone transmitter context.
    \brief Free a signalling tone transmitter context.
    \param s The signalling tone context.
    \return 0 for OK */
SPAN_DECLARE(int) sig_tone_tx_free(sig_tone_tx_state_t *s);

#if defined(__cplusplus)
}
#endif

#endif
/*- End of file ------------------------------------------------------------*/