mrtg 2.17.4-2+b1 / usr / bin / cfgmaker

#! /usr/bin/perl -w
# -*- mode: Perl -*-
##################################################################
# MRTG 2.17.4  -- Config file creator
##################################################################
# Created by Tobias Oetiker <tobi@oetiker.ch>
# this produces an mrtg config file for one router or more routers
# by pulling info off the router via snmp
##################################################################
# Distributed under the GNU copyleft
# Copyright 2000 by Tobias Oetiker
##################################################################

# DEBUG TARGETS
# base - basic program flow
# snpo - SNMP Polling
# snpd - SNMP Detail
#@main::DEBUG=qw(base);
@main::DEBUG=qw(base snpo snpd);

require 5.005; 
use strict;

BEGIN {
    # Automatic OS detection ... do NOT touch
    if ( $^O =~ /^(?:(ms)?(dos|win(32|nt)?))/i ) {
        $main::OS = 'NT';
        $main::SL = '\\';
        $main::PS = ';';
    } elsif ( $^O =~ /^NetWare$/i ) {
        $main::OS = 'NW';
        $main::SL = '/';
        $main::PS = ';';
    } elsif ( $^O =~ /^VMS$/i ) {
        $main::OS = 'VMS';
        $main::SL = '.';
        $main::PS = ':';
    } else {
        $main::OS = 'UNIX';
        $main::SL = '/';
        $main::PS = ':';
    }
}

use FindBin;
use lib "${FindBin::Bin}";
use lib "${FindBin::Bin}${main::SL}..${main::SL}lib${main::SL}mrtg2";

use MRTG_lib "2.100015";
use Getopt::Long;
use Pod::Usage;
use Socket;


sub main {

    # assign defaults
    my %opt = ( 
        'enable-ipv6' => 0,
        'use-16bit' => 0,
        'community' => 'public',
        'interfaces' => 1,
        'enablesnmpv3' => 0,
#        'snmp-options' => ':::::2'
    );
    my %routers;
    my %confcache;
    my $ipv4only;
    my %v3opt;
    $opt{fullcmd} =
            "$0 ".(join " ",
            map {$_ =~ /[ \[\]\*\{\}\;\>\<\&]/ ? qq{"$_"} : $_ } @ARGV);
    options(\%opt,\%routers);

    # Check for IPv6 libraries if IPv6 is enabled.
    # If the check fails, IPv6 is disabled.
    $ipv4only = 1;
    if ($opt{'enable-ipv6'} == 1) {
        if ((eval {local $SIG{__DIE__};require Socket6;}) && (eval {local $SIG{__DIE__};require IO::Socket::INET6;})) {
            debug ('base',"IPv6 libraries found, IPv6 enabled.");
            $ipv4only = 0;
        } else {
            warn "WARNING: IPv6 libraries not found, IPv6 disabled.\n";
            $opt{'enable-ipv6'} = 0;
        }
    }

    if ($opt{'use-16bit'} == 1) {
        warn "WARNING: Using 16bit RequestIDs\n";
        no warnings;
        $SNMP_Session::default_use_16bit_request_ids=1;
    }
    # Check for SNMP V3
    #
    	if (exists($opt{username}) or lc($opt{enablesnmpv3}) eq "yes" ) {
	       if  (eval {local $SIG{__DIE__};require Net_SNMP_util;})   {
	            import Net_SNMP_util;
	            debug('base', "SNMP V3 libraries found, SNMP V3 enabled.");
		    $opt{enablesnmpv3} = "yes";
	  	    push @{$opt{global}}, "enablesnmpv3: yes";
	        } else {
	            warn "WARNING: SNMP V3 libraries not found, SNMP V3 disabled. Falling back to V2c.\n";
	            require SNMP_util;
	            import SNMP_util;
		    $opt{enablesnmpv3} = "revert";
	        }															
	}
	else	{
	        require SNMP_util;
	        import SNMP_util;
		$opt{enablesnmpv3} = "no";
	}

    init();

    foreach my $router
    (sort
     {($routers{$a}{noofrouter}) <=> ($routers{$b}{noofrouter})}
     keys %routers)
    {
	my @snmpopt = split(/:/,$routers{$router}{'snmp-options'});
	if ($snmpopt[5] and $snmpopt[5] == 3) {
		if ($opt{enablesnmpv3} eq "revert") {
			$snmpopt[5] = 2;
			warn "reverting to snmpV2c for router $router\n";
			$routers{$router}{'snmp-options'} = join(":",@snmpopt);
                        $routers{$router}{snmpopt_current} = $routers{$router}{'snmp-options'};
		} else {
			die "SNMP V3 requires a --username parameter as part of the User Security Model for router $routers{$router}{routerkey}" if $opt{enablesnmpv3} eq "no";
			$routers{$router}{enablesnmpv3} = $opt{enablesnmpv3};
			%v3opt = parsev3(\%opt);
		}
	} else {
		debug('base',"snmpv3 available, but using v1/v2c for $routers{$router}{routerkey}") if $opt{enablesnmpv3} eq "yes";
	}

			
        # pod2usage(-verbose=>1,-message=>"ERROR: Could not Parse $router\n")
        #     unless  $router =~ /.*\@.*/;
        debug('base',"Get Device Info on $router");
        $routers{$router}{ipv4only} = $ipv4only;
        if ( my $devinfo = DeviceInfo($router,\%routers,\%v3opt) ) {
            $routers{$router}{deviceinfo} = $devinfo;
        } else {
            warn "WARNING: Skipping $router as no info could be retrieved\n\n";
            sleep 5;
            next;
        }

        if ($opt{interfaces}) {
            debug('base',"Populating confcache");
            populateconfcache(\%confcache,$router,$routers{$router}{ipv4only},1,\%v3opt);
            debug('base',"Get Interface Info");
            InterfaceInfo(\%confcache,\%routers,$router,\%opt,\%v3opt);
        }
    }
    GenConf(\%opt,\%routers,\%confcache,\%v3opt);
} # end main

main;
exit 0;

sub InterfaceInfo($$$$$) {
    my $confcache = shift;
    my $routers = shift;
    my $router = shift;
    my $opt = shift;
    my $v3opt = shift;
    my @Variables = qw (ifIndex ifType ifAdminStatus ifOperStatus ifMtu);

    my $snmphost = v4onlyifnecessary($router, $routers->{$router}{ipv4only});

    if ($routers->{$router}{deviceinfo}{Vendor} eq 'cisco' &&
        $routers->{$router}{deviceinfo}{sysDescr} =~ m/Version\s+(\d+\.\d+)/) {
        push @Variables,  ($1 > 11.0 or $1 < 10.0 ) ? "ifAlias" : "CiscolocIfDescr";
        if ($1 > 11.2) {push @Variables, "vmVlan";};
       if ($1 > 11.3) {push @Variables, "vlanTrunkPortDynamicStatus";};
    } elsif ( $routers->{$router}{deviceinfo}{Vendor} =~ /(?:hp|juniper|dlink|wwp|foundry|dellLan|force10|3com|extremenetworks|openBSD|arista|enterasys|zyxel|vyatta)/i) {
        push @Variables, "ifAlias";
    }

    my $descr = $routers->{$router}{deviceinfo}{sysDescr};
    if ($routers->{$router}{deviceinfo}{Vendor} eq 'cisco' &&
        $descr =~ m/Catalyst\sOperating\sSystem|Cisco\sSystems\sWS-C2900/ ) {
        push @Variables,  "CiscoCatalystPortName";
        push @Variables, "vmVlan";
    }
    if ($routers->{$router}{deviceinfo}{Vendor} eq 'cisco' &&
        $descr =~ m/Catalyst/ ) {
        push @Variables,  "vlanTrunkPortDynamicStatus";
    }
    if ($descr =~ m/Passport-8610/ || $descr =~ m/MERS-8610/ ) {
        push @Variables,  "ppPortName";
    }

    foreach my $var (@Variables) {
        debug('base',"Walking $var");
        foreach my $tuple (snmpwalk($snmphost,$v3opt, $var)){
            my($if,$value) = split /:/, $tuple, 2;
            $value =~ s/[\0- ]+$//; # no trailing space
            $routers->{$router}{$if}{$var} = $value;
	    debug('snpd',"  $router -> $if -> $var = $value");
        }
    }

    # interface speed var depends on snmp version

    my $snmp_version = (split(':', $router, 6))[5] || 1;
    if ( $snmp_version =~ /[23]/ ) {
        debug('base',"Walking ifSpeed");
        my @ifSpeed = snmpwalk($snmphost, $v3opt,'ifSpeed');
	debug('snpd',"\@ifSpeed = @ifSpeed\n");
        debug('base',"Walking ifHighSpeed");
        my @ifHighSpeed = snmpwalk($snmphost,$v3opt, 'ifHighSpeed');
        for ( my $i=0; $i<=$#ifSpeed; $i++ ) {
            my ($if,$value) = split /:/, $ifSpeed[$i], 2;
# the mib entry on ifSpeed says
#            "An estimate of the interface's current bandwidth in bits
#            per second.  For interfaces which do not vary in bandwidth
#            or for those where no accurate estimation can be made, this
#            object should contain the nominal bandwidth.  If the
#            bandwidth of the interface is greater than the maximum value
#            reportable by this object then this object should report its
#            maximum value (4,294,967,295) and ifHighSpeed must be used
#            to report the interace's speed.  For a sub-layer which has
#            no concept of bandwidth, this object should be zero."
            if ( (not defined $value) || ($value == 2**32-1) ) {
                ($if, $value) = split /:/, $ifHighSpeed[$i], 2;
	        $value = $value * 1000000;  # highSpeed = contador * 10^6
                debug('base',"Speed: $if - $value");
            }
	    if ( ($descr =~ m/MERS-8610/ ) && (defined $ifHighSpeed[$i]) ) {
		($if, $value) = split /:/, $ifHighSpeed[$i], 2;
                $value = $value * 1000000;  # highSpeed = contador * 10^6
                debug('base',"Speed: $if - $value");

            }
            $routers->{$router}{$if}{'ifSpeed'} = $value;
        }
    } else {
        debug('base',"Walking ifSpeed");
        foreach my $tuple (snmpwalk($snmphost,$v3opt, 'ifSpeed')){
            my($if,$value) = split /:/, $tuple, 2;
            $routers->{$router}{$if}{'ifSpeed'} = $value;
	    debug('snpd',"  $router -> $if -> ifSpeed = $value");
        }
    }

    # magic speed determination for portmaster IFs

    if ($routers->{$router}{deviceinfo}{Vendor} eq 'portmaster') {
        # We can only approximate speeds
        #
        # so we think that ppp can do 76800 bit/s, and slip 38400.
        # (actualy, slip is a bit faster, but usualy users with newer modems
        # use ppp). Alternatively, you can set async speed to 115200 or
        # 230400 (the maximum speed supported by portmaster).
        #
        # But if the interface is ptpW (sync), max speed is 128000
        # change it to your needs. On various Portmasters there are
        # various numbers of sync interfaces, so modify it.
        #
        #  The most commonly used PM-2ER has only one sync.
        #
        #  Paul Makeev (mac@redline.ru)
        #
        foreach my $if (keys %{$routers->{$router}}) {
            next unless $if =~ /^\d+$/;
            my $ift = $routers->{$router}{$if}{ifType};
            my $ifd = $routers->{$router}{$if}{Descr};
            if ($ift ==  23) {
                if ($ifd eq 'ptpW1') {
                    $routers->{$router}{$if}{ifSpeed} = 128000;
                } else {
                    $routers->{$router}{$if}{ifSpeed} = 76800;
                }
            } elsif ($ift == 28) {
                $routers->{$router}{$if}{ifSpeed} = 38400;
            } elsif ($ift == 6) {
                $routers->{$router}{$if}{ifSpeed} = 10000000;
            }
        }
    }

    # match confcache info into tree
    my $cachekey = cleanhostkey $router;

    foreach my $method (keys %{$$confcache{$cachekey}}) {
        foreach my $key (keys %{$$confcache{$cachekey}{$method}}) {
            my $if = readfromcache($confcache,$router,$method,$key);
            next unless $if =~ /^\d+$/;
            $routers->{$router}{$if}{$method} = $key;
            for ($method) {
                #fix special chars in ifdescr
                # no need for this we fix if references later on
                # /^Descr|Name$/ && do {
                #     $routers->{$router}{$if}{"R$method"} = $routers->{$router}{$if}{$method};
                #     $routers->{$router}{$if}{$method} =~ s/(:)/\\$1/g;
                #     next;
                # };

                #find hostname of IF
                !$$opt{noreversedns} && /^Ip$/ and do {
                    my $name =
                    gethostbyaddr(
                    pack('C4',
                         split(/\./,
                         $routers->{$router}{$if}{$method})),
                         AF_INET);
                    $routers->{$router}{$if}{DNSName} = ($name or "");
                    next;
                };
            }
        }
    }
} # end InterfaceInfo

sub GenConf ($$$$) {
    my $opt = shift;
    my $routers = shift;
    my $confcache = shift;
    my $v3opt = shift;
    my $conf = "# Created by \n# $$opt{fullcmd}\n\n";

    # print global options
    unless (defined $$opt{'nodefaultglobal'}) {
      $conf .= <<ECHO;

### Global Config Options

#  for UNIX
# WorkDir: /home/http/mrtg

#  for Debian
WorkDir: /var/www/mrtg

#  or for NT
# WorkDir: c:\\mrtgdata

### Global Defaults

#  to get bits instead of bytes and graphs growing to the right
# Options[_]: growright, bits

ECHO
}

    # Add EnableIPv6 option to configuration file
    if ($$opt{'enable-ipv6'} == 1) {
        $conf .= "EnableIPv6: yes\n";
    } else {
        $conf .= "EnableIPv6: no\n";
    }

    foreach my $router
      (sort {($$routers{$a}{noofrouter}) <=> ($$routers{$b}{noofrouter})}
       keys %$routers ) {
        my $router_ref = $$routers{$router};
        my $router_opt = $$router_ref{opt};
        my $router_dev = $$router_ref{deviceinfo};

        # Did any global options appear on the command line
        # before this router?  If so, include them into the
        # configuration file.
        if (defined $$router_opt{global}) {
            foreach my $key (@{$$router_opt{global}}) {
                $conf .= "$key\n";
            }
        }

        # If IPv6 is enabled, add IPv4Only target directive for targets
        # that do not support SNMP over IPv6.
        my $ipv4only_directive;
        my $router_ipv4only = ($$opt{'enable-ipv6'} == 1) && $$router_ref{ipv4only};

        my $syscontact = $$router_dev{sysContact};
        my $html_syscontact = html_escape($syscontact);
        my $syslocation = $$router_dev{sysLocation};
        my $html_syslocation = html_escape($syslocation);
        my $sysname = $$router_dev{sysName};
        my $sysdescr = $$router_dev{sysDescr};
        my $comment_sysdescr = $sysdescr;
        # make sure embeded newlines do not harm us here
        $comment_sysdescr =~ s/[\n\r]+/\n\#          /g;
        my $community = $$router_ref{community};
        $community  =~ s/([@ ])/\\$1/g;
        my $router_connect = "$community\@$$router_ref{routername}$$router_ref{snmpopt_current}";
	my @v3options;
		foreach my $v3op (keys %$v3opt) {
			push @v3options, $v3op."=>'".$$v3opt{$v3op}."'";
		}
	my $v3options = join(",",@v3options) if $$router_ref{'snmp-options'} =~ /(?::[^:]*){4}:3/ ;
        my $html_sysdescr = html_escape($sysdescr);
        my $router_name =
            ($$router_ref{routername}
             . (($$router_ref{'dns-domain'})?'.':'')
             . $$router_ref{'dns-domain'});

        # James Overbeck 2001/09/20
        # Moved $directory_name definition from within the interface
        # foreach loop to here. In its previous location, $directory_name
        # was not accessible to host templates. $directory_name is not
        # changed per-interface so it might as well be here instead of
        # where it was.

        my $directory_name = "";

        if (defined $$router_opt{subdirs}) {
            $directory_name = $$router_opt{subdirs};
            $directory_name =~ s/HOSTNAME/$router_name/g;
            $directory_name =~ s/SNMPNAME/$$router_dev{sysName}/g;
        }


        my $target_lines = "";
        my $problem_lines = "";
        my $head_lines = "
######################################################################
# System: $sysname
# Description: $comment_sysdescr
# Contact: $syscontact
# Location: $syslocation
######################################################################
";

        my $separator_lines = "\n\n";

        # Host specific config lines generation code starts HERE

        if(defined $$router_opt{'host-template'}) {
            # First test if the file exists and is readable, die if not.
            die "File $$router_opt{'host-template'} didn't exist.\n"
            unless (-e $$router_opt{'host-template'}
                and -r $$router_opt{'host-template'});
            # Open the file (or die).
            open IF_TEMPLATE, $$router_opt{'host-template'}
                or die "File $$router_opt{'host-template'} couldn't be opened.\n";

            my @template_lines = readline *IF_TEMPLATE;
	    close IF_TEMPLATE;
            $@ = undef;
            eval ('local $SIG{__DIE__};'.join("", @template_lines));

            die  "ERROR Evaluation of the contents in the file \n\n".
                 "$$router_opt{'host-template'}\ngave the error \n\n\"$@\"\n\nExiting cfgmaker\n" if $@;
        }

        $conf .= ($head_lines
              . $problem_lines
              . $target_lines
              . $separator_lines);

        # Host specific config lines generation code ends HERE


        if ($$router_opt{'interfaces'}) {
            foreach my $ifindex (sort {int($a) <=> int($b)} grep /^\d+$/, keys %$router_ref) {
                my $i = $$router_ref{$ifindex};

                # Now define a number of variables used for this interface.
                # Some variables are just used internally by cfgmaker to
                # process the interface, others are provided for usage in
                # host and interface templates and for interface filters.

                my $if_index = $ifindex;
                my $if_eth = $$i{Eth} || 'No Ethernet Id';

                # does it make sense to look at the interface ?
                my @prob;
                my $default_ifstate = 1; # State assumed up.
                my $default_iftype = 1;  # iftype assumed ok.
                my $if_ok = 1;           #

                my $if_admin = (($$i{ifAdminStatus} || 0) == 1);
                my $if_oper = (($$i{ifOperStatus} || 0) == 1);

                my $if_type = $$i{ifType} || -1;
                my $if_is_ethernet = 0 < scalar(grep {$_ == $if_type;}
                                    (6,7,26,62,69,117));
                my $if_is_isdn = (0 < scalar (grep {$_ == $if_type;}
                                    (20,21,63,75,76,77)));
                my $if_is_dialup = $if_is_isdn ||
                                (0 < scalar (grep {$_ == $if_type;}
                                    (23,81,82,108)));
                my $if_is_atm = (0 < scalar(grep {$_ == $if_type;}
                                    (37,49,107,105,106,114,134)));

                my $if_is_wan = 0 < scalar(grep {$_ == $if_type;}
                                    (22,30,32,39,44,46));

                my $if_is_lan = $if_is_ethernet ||
                                (0 < scalar (grep {$_ == $if_type;}
                                    (8,9,11,15,26,55,59,60,115)));
                my $if_is_dsl = (0 < scalar(grep {$_ == $if_type;}
                                    (94,95,96,97)));
                my $if_is_loopback = $if_type == 24;
                my $if_is_ciscovlan =
                    ($$router_dev{Vendor} eq 'cisco'
                    and $$i{Descr} =~ /^(unrouted )?[- ]?VLAN[- ]?\d*$/i);

                my $if_ip = $$i{Ip} || 'No Ip';
                my $if_snmp_descr = $$i{Descr} || 'No Description';
                $if_snmp_descr =~ s/\n$//; # no you don't want to know who does this
                                           # ok ... dell 3524
                $if_snmp_descr =~ s/ /-/g;
                my $if_type_num = $$i{ifType} || 'Unknown Type';
                $$i{ifType} ||= -1;
                my $if_snmp_name = $$i{Name} || 'No Name';
                my $if_snmp_alias = $$i{ifAlias} || '';
                my $if_cisco_descr = $$i{CiscolocIfDescr} || '';
                my $if_dns_name = $$i{DNSName} || 'No DNS name';
                my $if_vlan_id = $$i{vmVlan} || 'No Vlan';
                my $if_cisco_trunk = ($$i{vlanTrunkPortDynamicStatus} || 0 == 1);
		my $if_MTU = $$i{ifMtu} || 'No MTU';

                # For Nokia IPSO, find non-ethernet interfaces with IP addresses
                # and add missing MAC address and Port Speed information to
                # to the LOGICAL and LOGICAL+VLAN interfaces.
                if ( $$router_dev{Vendor} eq 'nokiaipsofw' ) {
                    if ($$i{ifType} ne "6" and
                        $$router_dev{sysDescr} =~ / IPSO / &&
                        $$i{Ip} =~ /^\d+/ and
                       (not $$i{Eth} or
                        not $$i{ifSpeed} or
                        $$i{ifSpeed} < 10 )
                       ) {
                        my $logical_if_name = $$i{Name};

                        # Split the LOGICAL interface name in attempt
                        # to match with base PHYSICAL interface detail.
                        my ($logical_if_HEAD, $logical_if_TAIL) =
                            $logical_if_name =~ /^(.*)(c\d+)$/;

                        foreach my $ifindexTMP (sort {int($a) <=> int($b)}
                            grep /^\d+$/, keys %$router_ref) {
                            next unless $ifindexTMP =~ /^\d+$/;

                            my $physical_if_name = $$router_ref{$ifindexTMP};

                            if ($$physical_if_name{ifType} == 6 &&
                                $logical_if_HEAD eq $$physical_if_name{Name} ) {
                                $$i{Eth} ||= $$physical_if_name{Eth};
                                $$i{ifSpeed} = $$physical_if_name{ifSpeed}
                                        if ( not $$i{ifSpeed} or $$i{ifSpeed} < 10 );
                            }
                        }
                    }
                }

                # First investigate the state of the interface.
                if (not defined $$router_opt{'no-down'}) {
                    if (($$i{ifAdminStatus} || 0 )== 2) {
                        push @prob, "it is administratively DOWN";
                        $default_ifstate = 0;
                    } elsif (($$i{ifAdminStatus} || 0 ) == 3) {
                        push @prob, "it is in administrative TEST mode";
                        $default_ifstate = 0;
                    }

                    if (not defined $$router_opt{'show-op-down'}) {
                       if (($$i{ifOperStatus} || 0 ) == 2) {
                          push @prob, "it is operationally DOWN";
                          $default_ifstate = 0;
                       } elsif (($$i{ifOperStatus} || 0 ) == 3) {
                           push @prob, "it is in operational TEST mode";
                          $default_ifstate = 0;
                      }
                    }
                 }


                # Investigate the type of the interface.
                if ($$router_dev{Vendor} eq 'cisco' && $$i{ifType} == 18) { # by fwo@obsidian.co.za
                    push @prob, "it is a DS1 controllers";
                    $default_iftype = 0;
                } elsif ($$router_dev{Vendor} eq 'cisco' && $$i{ifType} == 19) { # by fwo@obsidian.co.za
                    push @prob, "it is a E1 controllers";
                    $default_iftype = 0;
                } elsif ($$i{ifType}  == 24) {
                    push @prob, "it is a Software Loopback interface" ;
                    $default_iftype = 0;
                } elsif ($$router_dev{Vendor} eq 'cisco' && $$i{ifType} == 30) { # by blube@floridadigital.net
                    push @prob, "it is a DS3 controller";
                    $default_iftype = 0;
                } elsif ($$router_dev{Vendor} eq 'cisco' && $$i{ifType} == 102) { # by dan.mcdonald@austinenergy.com
                    push @prob, "it is a Voice controller";
                    $default_iftype = 0;
                } elsif ($$router_dev{Vendor} eq 'cisco' && $$i{ifType} == 103) { # by dan.mcdonald@austinenergy.com
                    push @prob, "it is a Voice dial peer";
                    $default_iftype = 0;
                } elsif ($$i{ifType} == 162) {
                    push @prob, "it is a CEF Sub-interface"; # John Begley <maslow@mediaone.net>
                } elsif ($$router_dev{Vendor} eq 'cisco'
                  and $$i{Descr} eq 'Null0') {
                    push @prob, "it is a cisco Null0 interface";
                    $default_iftype = 0;
                }
                my $default = $default_iftype && $default_ifstate;

                # Do some futher investigation if the interface makes
                # sense to collect on

		# I debated whether to insert the zero-speed check before
		# or after the "will always be zero" sections below.
		# I settled on before since I'll assume the user knows
		# what speed the zero-speed interfaces should be better
		# than the simple logic below.
		if (not $$i{ifSpeed} and $$router_opt{'zero-speed'}) {
		    # Set all interfaces with zero speed to the value specified
		    # by the --zero-speed= command line option.

		    # Be sure the value specified is a valid integer.
		    # It seems like this could be done once when
		    # $$router_opt is set, but I didn't see any example
		    # of input validation in that part of cfgmaker,
		    # so it gets done here, more times than are
		    # really necessary.  ;-)
		    unless ($$router_opt{'zero-speed'} =~ /^\d+$/) {
		         die "ERROR: zero-speed specified with non-integer speed: $$router_opt{'zero-speed'}";
		    }
		    $$i{ifSpeed} = $$router_opt{'zero-speed'};
		}

                if (not $$i{ifSpeed} and $$router_dev{Vendor} eq 'foundry' and $$i{ifType} == 194) {
                    # foundry ATM subinterfaces always report 0 speed, make it 155Mbps instead.
                    $$i{ifSpeed} =  155000000;
                } elsif (not $$i{ifSpeed} and $$router_dev{Vendor} eq 'foundry' and $$i{ifType} == 135) {
                    # Foundry virtual Ethernet interfaces always report 0 speed, make it 1GB instead.
                    $$i{ifSpeed} = 1000000000;
                } elsif (not $$i{ifSpeed} and $$router_dev{Vendor} eq 'cisco' and $$i{sysDescr} =~ /FWSM-Firewall / )  {
                    # Cisco PIX Firewall Switch Modules have effective backplane speed of 600 Megs
		    $$i{ifSpeed} = 600000000;
                } elsif (not $$i{ifSpeed} and $$router_dev{Vendor} eq '3com' and $$i{Descr} =~ /RMON VLAN (\d+)/ ) {
                    $$i{ifSpeed} = 100000000;
                    $if_vlan_id = $1;
                } elsif (not $$i{ifSpeed}) {
                    push @prob, "has no ifSpeed property";
                    $$i{ifSpeed} = 0;
                    $if_ok = 0;
                }

                my $message;
		my $nohc =0;
                if ($message = IsCounterBroken($ifindex, $router_ref,$v3opt)) {
                    # set snmpopt_current to working snmp options
		    if ($message eq '1') {
			    $nohc = 1;
		    } else {
                            push @prob, "got '$message' from interface when trying to query";
                    $if_ok = 0;
	    	    }
                }

                my $community = $$router_ref{community};
                $community  =~ s/([@ ])/\\$1/g;
                my $router_connect = "$community\@$$router_ref{routername}$$router_ref{snmpopt_current}";
   		
		my $v3options = join(",",@v3options) if $$router_ref{snmpopt_current} =~ /(?::[^:]*){4}:3/ ;
		
                # determine interface reference
                my $if_ref;
                if (defined $$router_opt{ifref}) {
                    foreach  (split /,/,$$router_opt{ifref}) {
                        /^ip$/   && do { if($$i{Ip}   ){ $if_ref = "/".$$i{Ip};    last;} next};
                        /^eth$/  && do { if($$i{Eth}  ){ $if_ref = "!".$$i{Eth};   last;} next};
                        /^descr?$/&& do { if($$i{Descr}){ $if_ref = "\\".$$i{Descr};last;} next};
                        /^name$/ && do { if($$i{Name} ){ $if_ref = "#".$$i{Name};  last;} next};
                        /^type$/ && do { if($$i{Type} ){ $if_ref = "%".$$i{Type};  last;} next};
                        /^nr$/   && do { $if_ref = $ifindex; last };
                        die "ERROR: Invalid value for --ifref: $$router_opt{ifref} ($_)\n";
                    }
                    if (not defined $if_ref) {
                        push @prob, "--ifref=$$router_opt{ifref} is not unique for this interface";
                        $if_ref = $ifindex;
                        $if_ok = 0;
                    }
                } else {
                    $if_ref = $ifindex;
                }

                # generate Target name
                my $trim_if_ref = $if_ref;
                $trim_if_ref =~ s/[\#!\/\\:\s\@%]+/_/g;
                $trim_if_ref =~ s/^_*(.+?)_*$/$1/;
                my $target_name = "${router_name}_$trim_if_ref";
                my $if_title_desc = $if_ref;
                $if_title_desc =~ s/^[^\d]//;
                my $if_speed = int($$i{ifSpeed} / 8);
                my $if_speed_str = fmi($if_speed,$$router_ref{flags});
                my $if_type_desc = IfType($$i{ifType});
                my $html_if_type_desc = html_escape($if_type_desc);
                my $desc_prefix = 'Traffic Analysis for ';

                my $port_dot = $$i{Name} || 'Unknown';
                $port_dot =~ s/\//./g;
                my $if_port_name = $$router_ref{$port_dot}{CiscoCatalystPortName};
                my $if_pp_port_name = $$router_ref{$ifindex}{ppPortName};

                if (defined $$router_opt{ifdesc}) {
                    $desc_prefix = '';
                    foreach (split /,/,$$router_opt{ifdesc}) {
                        /^ip$/    && do { if($$i{Ip})   { $if_title_desc = $$i{Ip};    last } next };
                        /^eth$/   && do { if($$i{Eth})  { $if_title_desc = $$i{Eth};   last } next };
                        /^descr?$/ && do { if($$i{Descr}){ $if_title_desc = $if_snmp_descr; last } next };
                        /^alias$/ && do { if($$i{ifAlias}){ $if_title_desc = "$if_snmp_descr $if_snmp_alias $if_cisco_descr"; last } next };
                        /^name$/ && do { if($$i{Name}) {$if_title_desc = "#".$$i{Name}; last } next };
                        /^catname$/ && do {$if_title_desc = $if_port_name; last };
                        /^ppname$/ && do {$if_title_desc = $if_pp_port_name; last};
                        /^type$/ && do { if($$i{Type}) { $if_title_desc = "%".$$i{Type}; last } next };
                        /^nr$/ && do {$if_title_desc = "Interface $ifindex"; last};
                        /^$/ && do {$if_title_desc = $if_type_desc || $if_snmp_descr; last };
                        die "ERROR: Invalid value for --ifdesc: '$$router_opt{ifdesc} ($_)'\n";
                    }
                }

                # Now setup a large number of variables needed for the
                # generation of the configuration lines.

                $if_title_desc =~ s/\\([:@\\\/\# ])/$1/g; # unescape
                $if_title_desc = $if_snmp_name if not $if_title_desc;
                my $html_if_title_desc = html_escape($if_title_desc);
                my $html_desc_prefix = html_escape($desc_prefix);

                my $html_if_snmp_descr = html_escape($if_snmp_descr);
                my $html_if_snmp_name = html_escape($if_snmp_name);
                my $html_if_snmp_alias = html_escape($if_snmp_alias);
                my $html_if_cisco_descr = html_escape($if_cisco_descr);
                my $if_description = "$if_snmp_descr $if_snmp_alias $if_cisco_descr";
                my $html_if_description = html_escape($if_description);
                my $if_title = "$desc_prefix$if_title_desc -- $sysname";
                my $html_if_title = html_escape($if_title);

                my $head_lines = "### Interface $ifindex >> Descr: '$if_snmp_descr' |".
                                 " Name: '$if_snmp_name' | Ip: '$if_ip' | Eth: '$if_eth' ###\n";

                my $target_lines = "";
                my $separator_lines = "\n\n";

                # escape the if reference
                $if_ref =~ s/([& :])/\\$1/g;
                my $default_target_directive = "Target[$target_name]: $if_ref:$router_connect";
		$default_target_directive .= "\nSnmpOptions[$target_name]: $v3options"  if $$router_ref{snmpopt_current} =~ /(?::[^:]*){4}:3/ ;
		$default_target_directive .= "\nnoHC[$target_name]: yes" if $nohc == 1;
	        my $if_snmp_descr_save = $if_snmp_descr;
		$if_snmp_descr_save =~ s/"/'/g;
                my $default_setenv_directive = "SetEnv[$target_name]: MRTG_INT_IP=\"$if_ip\" MRTG_INT_DESCR=\"$if_snmp_descr_save\"";
                my $default_directory_directive = ($directory_name ? "Directory[$target_name]: $directory_name" : "");
                my $default_maxbytes_directive = "MaxBytes[$target_name]: $if_speed";

                $ipv4only_directive = $router_ipv4only ? "IPv4Only[$target_name]: yes" : "";

                my $default_title_directive = "Title[$target_name]: $html_desc_prefix$html_if_title_desc -- $sysname";
                my $default_pagetop_directive =
                "PageTop[$target_name]: <h1>$html_desc_prefix$html_if_title_desc -- $sysname</h1>
		<div id=\"sysdetails\">
			<table>
				<tr>
					<td>System:</td>
					<td>$sysname in $html_syslocation</td>
				</tr>
				<tr>
					<td>Maintainer:</td>
					<td>$html_syscontact</td>
				</tr>
				<tr>
					<td>Description:</td>
					<td>$html_if_description</td>
				</tr>
				<tr>
					<td>ifType:</td>
					<td>$html_if_type_desc ($if_type_num)</td>
				</tr>
				<tr>
					<td>ifName:</td>
					<td>$html_if_snmp_name</td>
				</tr>";
                $default_pagetop_directive .= "
				<tr>
					<td>Port Name:</td>
					<td>$if_port_name</td>
				</tr>" if defined $if_port_name;
                $default_pagetop_directive .= "
				<tr>
					<td>Port Name:</td>
					<td>$if_pp_port_name</td>
				</tr>" if defined $if_pp_port_name;
                $default_pagetop_directive .= "
				<tr>
					<td>Max Speed:</td>
					<td>$if_speed_str</td>
				</tr>";
                $default_pagetop_directive .= "
				<tr>
					<td>Ip:</td>
					<td>$if_ip ($if_dns_name)</td>
				</tr>" if $if_ip;
                $default_pagetop_directive .= "
			</table>
		</div>";

                my $default_target_lines =
                    ("\n"
                    . $default_target_directive . "\n"
                    . $default_setenv_directive . "\n"
                    . ($default_directory_directive
                    ? ($default_directory_directive . "\n")
                    : "")
                    . $default_maxbytes_directive . "\n"
                    . ($ipv4only_directive
                    ? ($ipv4only_directive . "\n")
                    : "")
                    . $default_title_directive . "\n"
                    . $default_pagetop_directive . "\n");


                # If --if-filter is provided, evalutat that.  If it
                # returns true, clear @prob.  If it returns false,
                # instead add a complaint to @prob.

                if (defined $$router_opt{'if-filter'}) {
                    $@ = undef;
                    if (eval('local $SIG{__DIE__};'.$$router_opt{'if-filter'})) {
                        @prob = ();
                    } else {
                        push @prob, "filter specified by --if-filter rejected the interface";
                        $if_ok = 0;
                    }
                    die "ERROR: with if-filter $$router_opt{'if-filter'}: $@" if $@;
                }


                # issue problem report

                my $problem_lines = "";

                if (@prob) {
                    $problem_lines .= "### The following interface is commented out because:\n";
                    map {$problem_lines .= "### * $_\n"} @prob;
                    $if_ok = 0;
                }

                # The target config generation code starts HERE.


                if (defined $$router_opt{'if-template'}) {
                    # First test if the file exists and is readable,
                    # die if not.
                    die "File $$router_opt{'if-template'} didn't exist.\n" unless (-e $$router_opt{'if-template'}
                        and -r $$router_opt{'if-template'});
                    # Open the file (or die).
                    open IF_TEMPLATE, $$router_opt{'if-template'}
                        or die "File $$router_opt{'if-template'} couldn't be opened.\n";
                    my @template_lines = readline *IF_TEMPLATE;

                    $@ = undef;
                    eval ('local $SIG{__DIE__};'.join( "", @template_lines));
                    die "Evaluation of the contents in the file \n\n$$router_opt{'if-template'}\n".
                        "gave the error \n\n\"$@\"\n\nExiting cfgmaker\n" if $@;
                } else {
                    $target_lines = $default_target_lines;
                }


                if ($target_lines && not $if_ok) { # comment out the target lines if needed
                    $target_lines =~ s/^/\# /gm;
                }

                $conf .= ($head_lines
                    . $problem_lines
                    . $target_lines
                    . $separator_lines);

            }
            # Target generation code ends HERE.
        }
    }

    # print any global options which might have
    # appeared on the command line after the last
    # router.
    if (defined $$opt{global}) {
        foreach my $key (@{$$opt{global}}) {
            $conf .= "$key\n";
        }
    }

    if ($$opt{output}) {
        debug ('base', "Writing $$opt{output}");
        open X, ">$$opt{output}" or die "ERROR: creating $$opt{output}: $!\n";
        print X $conf;
        close X;
    } else {
        print $conf;
    }
} # end GenConf

sub IsCounterBroken ($$$) {
    my $if = shift;
    my $router_ref = shift;
    my $v3opt = shift;
    my $router = $$router_ref{routerkey};
    my $fallback = 0;
    local $SNMP_Session::suppress_warnings = 3;
    local $Net_SNMP_util::suppress_warnings = 3;

    my $ipv4only = $$router_ref{ipv4only};
    my $snmphost = v4onlyifnecessary($router, $ipv4only);

    if ($router =~ /:[\d.]*:[\d.]*:[\d.]*:[23]/) {
        my $speed = (snmpget($snmphost, $v3opt, 'ifHighSpeed.'.$if))[0] || 'unknown';
        debug('base',"snmpget $snmphost for ifHighSpeed.$if -> $speed Mb/s");
        $SNMP_Session::errmsg = undef;
	$Net_SNMP_util::ErrorMessage = undef;
        my $counter = (snmpget($snmphost,$v3opt, 'ifHCInOctets.'.$if))[0] || 'unknown';
        debug('base',"snmpget $snmphost for ifHCInOctets.$if -> $counter");
        if( $speed eq 'unknown' or $counter !~ /^\d+$/ or $SNMP_Session::errmsg or $Net_SNMP_util::ErrorMessage){
            $SNMP_Session::errmsg = undef;
            $Net_SNMP_util::ErrorMessage = undef;
	    $fallback = 1;
            debug('base',"check for HighspeedCounters failed ... Dropping back to V1");
        } else {
           return 0;
        }
    }
    if ( $fallback == 1 or $$router_ref{snmpopt_current} !~ /:[\d.]*:[\d.]*:[\d.]*:[23]/) {
         my $counter = (snmpget($snmphost, 'ifInOctets.'.$if))[0];
         if (defined $SNMP_Session::errmsg) {
             my $error = $SNMP_Session::errmsg;
             $SNMP_Session::errmsg = undef;
             $error =~ s/\n/\n###     /g;
             return $error;
     	} elsif (defined $Net_SNMP_util::ErrorMessage and $Net_SNMP_util::ErrorMessage =~ /\w/) {
             my $error = $Net_SNMP_util::ErrorMessage;
             $Net_SNMP_util::ErrorMessage = undef;
             $error =~ s/\n/\n###     /g;
             return $error;
         } elsif (not defined $counter or $counter eq '' or $counter =~ /\D/) {
              return "No counter exists for $if";
         }
    }
    return $fallback;
} # end IsCounterBroken

# DeviceInfo does fallback between IPv6 and IPv4: if an IPv6 snmpwalk returns
# undef values (= an error) and the target is a hostname, then it repeats the
# query using IPv4 in case the target does not support SNMP over IPv6.
# If DeviceInfo falls back to IPv4, it sets the ipv4only field for the target
# in the routers hash.
sub DeviceInfo ($$$) {
    my $router=shift;
    my $routers=shift;
    my $v3opt=shift;
    my %DevInfo;
    my $ipv4only = $$routers{$router}{ipv4only};

    my @variables = snmpwalk(v4onlyifnecessary($router, $ipv4only),$v3opt,'1.3.6.1.2.1.1'); # walk system
    if (!(defined $variables[0])) {
        # Do we need to fall back to IPv4?
        my ($commmunity, $host) = ($1, $2) if ($router =~ /^(.*)@([^@]+)$/);
        if ( ( ! $ipv4only ) && ( $host !~ /^\[(.*)\]/) ) {
            # Not using IPv4, not an IPv6 address, so a hostname
            debug ('base',"No response using IPv6 for $router, trying again using IPv4");
            $$routers{$router}{ipv4only} = 1;
            @variables = snmpwalk(v4onlyifnecessary($router, 1),$v3opt, '1.3.6.1.2.1.1');
        }
    }
    if ( defined $variables[0] ) {
        my (%DevInfo, %revOIDS);
	
	if ($$routers{$router}{enablesnmpv3} || '' eq "yes") {
                no warnings;
        	%revOIDS = reverse %Net_SNMP_util::OIDS;
	 }
	 else {
                no warnings;
		%revOIDS = reverse %SNMP_util::OIDS;
	}	
        foreach my $variable ( @variables ) {
            my ($oid, $value) = split ( ':', $variable, 2);
            if ($revOIDS{'1.3.6.1.2.1.1.'.$oid}){
                $DevInfo{ $revOIDS{'1.3.6.1.2.1.1.'.$oid} } = $value; 
            }
       }
        # vendor identification
        my %vendorIDs = (
            # Add your vendor here
            # sysObjectID                Vendora
            '1.3.6.1.4.1.43.' =>        '3com',
            '1.3.6.1.4.1.11.' =>        'hp',
            '1.3.6.1.4.1.9.' =>         'cisco',
            '1.3.6.1.4.1.171.' =>       'dlink',
            '1.3.6.1.4.1.6141.' =>       'wwp',
            '1.3.6.1.4.1.674.10895.' => 'dellLan',
            '1.3.6.1.4.1.1916.' =>      'extremenetworks',
            '1.3.6.1.4.1.1991.' =>      'foundry',
            '1.3.6.1.4.1.6027.' =>      'force10',
            '1.3.6.1.4.1.2636.' =>      'juniper',
            '1.3.6.1.4.1.94.' =>        'nokiaipsofw',
            '1.3.6.1.4.1.307.' =>       'portmaster',
            '1.3.6.1.4.1.890.' =>       'zyxel',
	    '1.3.6.1.4.1.2272.30' =>    'nortel',
            '1.3.6.1.4.1.30155.' =>      'openBSD',
            '1.3.6.1.4.1.30065.' =>      'arista',    
            '1.3.6.1.4.1.5624.' =>      'enterasys',    
            '1.3.6.1.4.1.30803.' =>      'Vyatta',    
            '1.3.6.1.4.1.3955.' =>       'LinkSys'
        );
        $DevInfo{Vendor} = 'Unknown Vendor - '.$DevInfo{sysObjectID};
        foreach (keys %vendorIDs) {
            $DevInfo{Vendor} = $vendorIDs{$_} if ($DevInfo{sysObjectID} =~ /\Q$_\E/);
        }
        debug('base',"Vendor Id: $DevInfo{Vendor}");
        return \%DevInfo;
    } else {
        # we just die because the snmp module has already complained
        return undef;
    }
} # end DeviceInfo


sub fmi ($$) {
    my $number = shift;
    my $flags = shift;
    my(@short);
    if ($$flags{bits}){
        $number*=8;
        @short = ("bits/s","kbits/s","Mbits/s","Gbits/s");
    } else {
        @short = ("Bytes/s","kBytes/s","MBytes/s","GBytes/s");
    }
    my $digits=length("".$number);
    my $divm=0;
    while ($digits-$divm*3 > 4) { $divm++; }
    my $divnum = $number/10**($divm*3);
    return sprintf("%1.1f %s",$divnum,$short[$divm]);
} # end fmi


sub IfType ($) {
  my $id = shift;
  my $ift = {
      '1'=>'Other',
      '2'=>'regular1822',
      '3'=>'hdh1822',
      '4'=>'ddnX25',
      '5'=>'rfc877x25',
      '6'=>'ethernetCsmacd',
      '7'=>'iso88023Csmacd',
      '8'=>'iso88024TokenBus',
      '9'=>'iso88025TokenRing',
      '10'=>'iso88026Man',
      '11'=>'starLan',
      '12'=>'proteon10Mbit',
      '13'=>'proteon80Mbit',
      '14'=>'hyperchannel',
      '15'=>'fddi',
      '16'=>'lapb',
      '17'=>'sdlc',
      '18'=>'ds1',
      '19'=>'e1',
      '20'=>'basicISDN',
      '21'=>'primaryISDN',
      '22'=>'propPointToPointSerial',
      '23'=>'ppp',
      '24'=>'softwareLoopback',
      '25'=>'eon',
      '26'=>'ethernet-3Mbit',
      '27'=>'nsip',
      '28'=>'slip',
      '29'=>'ultra',
      '30'=>'ds3',
      '31'=>'sip',
      '32'=>'frame-relay',
      '33'=>'rs232',
      '34'=>'para',
      '35'=>'arcnet',
      '36'=>'arcnetPlus',
      '37'=>'atm',
      '38'=>'miox25',
      '39'=>'sonet',
      '40'=>'x25ple',
      '41'=>'iso88022llc',
      '42'=>'localTalk',
      '43'=>'smdsDxi',
      '44'=>'frameRelayService',
      '45'=>'v35',
      '46'=>'hssi',
      '47'=>'hippi',
      '48'=>'modem',
      '49'=>'aal5',
      '50'=>'sonetPath',
      '51'=>'sonetVT',
      '52'=>'smdsIcip',
      '53'=>'propVirtual',
      '54'=>'propMultiplexor',
      '55'=>'100BaseVG',
      '56'=>'Fibre Channel',
      '57'=>'HIPPI Interface',
      '58'=>'Obsolete for FrameRelay',
      '59'=>'ATM Emulation of 802.3 LAN',
      '60'=>'ATM Emulation of 802.5 LAN',
      '61'=>'ATM Emulation of a Circuit',
      '62'=>'FastEthernet (100BaseT)',
      '63'=>'ISDN & X.25',
      '64'=>'CCITT V.11/X.21',
      '65'=>'CCITT V.36',
      '66'=>'CCITT G703 at 64Kbps',
      '67'=>'Obsolete G702 see DS1-MIB',
      '68'=>'SNA QLLC',
      '69'=>'Full Duplex Fast Ethernet (100BaseFX)',
      '70'=>'Channel',
      '71'=>'Radio Spread Spectrum (802.11)',
      '72'=>'IBM System 360/370 OEMI Channel',
      '73'=>'IBM Enterprise Systems Connection',
      '74'=>'Data Link Switching',
      '75'=>'ISDN S/T Interface',
      '76'=>'ISDN U Interface',
      '77'=>'Link Access Protocol D (LAPD)',
      '78'=>'IP Switching Opjects',
      '79'=>'Remote Source Route Bridging',
      '80'=>'ATM Logical Port',
      '81'=>'AT&T DS0 Point (64 Kbps)',
      '82'=>'AT&T Group of DS0 on a single DS1',
      '83'=>'BiSync Protocol (BSC)',
      '84'=>'Asynchronous Protocol',
      '85'=>'Combat Net Radio',
      '86'=>'ISO 802.5r DTR',
      '87'=>'Ext Pos Loc Report Sys',
      '88'=>'Apple Talk Remote Access Protocol',
      '89'=>'Proprietary Connectionless Protocol',
      '90'=>'CCITT-ITU X.29 PAD Protocol',
      '91'=>'CCITT-ITU X.3 PAD Facility',
      '92'=>'MultiProtocol Connection over Frame/Relay',
      '93'=>'CCITT-ITU X213',
      '94'=>'Asymetric Digitial Subscriber Loop (ADSL)',
      '95'=>'Rate-Adapt Digital Subscriber Loop (RDSL)',
      '96'=>'Symetric Digitial Subscriber Loop (SDSL)',
      '97'=>'Very High Speed Digitial Subscriber Loop (HDSL)',
      '98'=>'ISO 802.5 CRFP',
      '99'=>'Myricom Myrinet',
      '100'=>'Voice recEive and transMit (voiceEM)',
      '101'=>'Voice Foreign eXchange Office (voiceFXO)',
      '102'=>'Voice Foreign eXchange Station (voiceFXS)',
      '103'=>'Voice Encapulation',
      '104'=>'Voice Over IP Encapulation',
      '105'=>'ATM DXI',
      '106'=>'ATM FUNI',
      '107'=>'ATM IMA',
      '108'=>'PPP Multilink Bundle',
      '109'=>'IBM IP over CDLC',
      '110'=>'IBM Common Link Access to Workstation',
      '111'=>'IBM Stack to Stack',
      '112'=>'IBM Virtual IP Address (VIPA)',
      '113'=>'IBM Multi-Protocol Channel Support',
      '114'=>'IBM IP over ATM',
      '115'=>'ISO 802.5j Fiber Token Ring',
      '116'=>'IBM Twinaxial Data Link Control (TDLC)',
      '117'=>'Gigabit Ethernet',
      '118'=>'Higher Data Link Control (HDLC)',
      '119'=>'Link Access Protocol F (LAPF)',
      '120'=>'CCITT V.37',
      '121'=>'CCITT X.25 Multi-Link Protocol',
      '122'=>'CCITT X.25 Hunt Group',
      '123'=>'Transp HDLC',
      '124'=>'Interleave Channel',
      '125'=>'Fast Channel',
      '126'=>'IP (for APPN HPR in IP Networks)',
      '127'=>'CATV MAC Layer',
      '128'=>'CATV Downstream Interface',
      '129'=>'CATV Upstream Interface',
      '130'=>'Avalon Parallel Processor',
      '131'=>'Encapsulation Interface',
      '132'=>'Coffee Pot',
      '133'=>'Circuit Emulation Service',
      '134'=>'ATM Sub Interface',
      '135'=>'Layer 2 Virtual LAN using 802.1Q',
      '136'=>'Layer 3 Virtual LAN using IP',
      '137'=>'Layer 3 Virtual LAN using IPX',
      '138'=>'IP Over Power Lines',
      '139'=>'Multi-Media Mail over IP',
      '140'=>'Dynamic synchronous Transfer Mode (DTM)',
      '141'=>'Data Communications Network',
      '142'=>'IP Forwarding Interface',
      '162'=>'Cisco Express Forwarding Interface',
   };
   return ($ift->{$id} || "Uknown Interface Type");
} # end IfType





sub options ($$) {
    my $opt = shift;
    my $routers = shift;

    my $noofrouter = 0; # How many routers we've seen on cmdline.

    # The $flags hash stores what we've seen in Options[_],
    # Options[^] and Options[$] so far.
    # A cmdline arg like --global 'Options[_]: bits' will insert
    # the element $$flags{default}{bits}="set".
    # Similarly --global 'Options[$]:' will delete all elements
    # in $$flags{append}
    #
    # This was originally created to manipulate the "bits" flag
    # so fmi should know when to use "bits" or "bytes".  It might
    # be overkill to use such a comples solution but it makes life
    # easier if cfgmaker in the future has to be extended to be
    # aware of other Options[] settings like gauge, growright etc.

    my %flags;
    {
        my $def = {};
        my $pre = {};
        my $app = {};
        %flags = (default => $def,
                  prepend => $pre,
                  append  => $app);
    }

    my $addrouter_ornf = addrouter($opt,
                   $routers,
                   \$noofrouter,
                   \%flags);

    Getopt::Long::Configure("permute");
    GetOptions( $opt,
        'help|?',
        'man',
        'subdirs=s',
        'no-down',
        'show-op-down',
        'noreversedns',
        'ifref=s',
        'ifdesc=s',
        'if-filter=s',
        'if-template=s',
        'interfaces!',
        'host-template=s',
        'community=s',
	'username=s',
	'authkey=s',
	'authpassword=s',
	'authprotocol=s',
	'contextengineid=s',
	'contextname=s',
	'privkey=s',
	'privpassword=s',
	'privprotocol=s',
        'snmp-options=s',
        'dns-domain=s',
        'version',
        'output=s',
        'global=s@',
        'nodefaultglobal',
        'enable-ipv6',
        'enablesnmpv3',
        'use-16bit',
	'zero-speed=s',
        '<>', $addrouter_ornf) or pod2usage(2);

    die("cfgmaker for mrtg-2.17.4\n") if $$opt{version};
    pod2usage(-exitval => 0, -verbose => 2) if $$opt{man};
    pod2usage(-verbose => 1) if not keys %$routers;
} # end options

# The callback routine used by GetOptions to process "non-option
# strings" (routers) among the arguments is given only ONE argument.
# However, I want it to be able to specify both the %options hash
# (for read access) and the %routers hash (for modifying) as well
# as the router's name.  This makes for three arguments.
#
# The solution is to use a closure.  addrouter takes a opt hash, a
# routers hash, an index to the current number of routers and a flags
# hash and then returns a function which "remembers" these
# values (the closure) but also takes an argument (the router name).

sub addrouter() {
    my $opt = shift;
    my $routers = shift;
    my $noofrouter = shift;
    my $flags = shift;

    return sub {
        my $rawname = shift;

        $$noofrouter++;  # First increase the number of routers seen.

        my ($community,$routername,$routerkey,$snmpopt,$dnsdomain,$tmpname,@tmpsnmp);

        # Now make sure that the router is defined with the
        # proper community, domainname and SNMP options.
        # Dissect the rawname to find out what it contains.

        # First check for community:
        if ($rawname =~ /^(.+)\@([^@]+)$/) {
            # Community was given explicitly!
            $community = $1;
            $tmpname = $2
        } else {
            $community = $$opt{community};
            $tmpname = $rawname;
        }
        # Now separate the router name from the options. We
        # can't just split on the : character because a numeric
        # IPv6 address contains a variable number of :'s
        if( ($tmpname =~ /^(\[.*\]):(.*)$/) || ($tmpname =~ /^(\[.*\])$/) ){
            # Numeric IPv6 address between []
            ($routername, $snmpopt) = ($1, $2);
        } else {
            # Hostname or numeric IPv4 address
            ($routername, $snmpopt) = split(':', $tmpname, 2);
        }
        @tmpsnmp = split(':', $snmpopt || '');

        $routername =~ s/\.$//; # if the hostname ends in a '.' remove it
                                # it seems to cause trouble in some other
                                # parts of mrtg

        # Now setup the SNMP options.
        if (not defined $$opt{'snmp-options'}) {
            $snmpopt = ':' . (join ':', @tmpsnmp);  # No merge needed.
        } else {
            my ($t,$o,@s);
            my @optsnmp = split ':',$$opt{'snmp-options'};

            # Trim first element as the SNMP options start
            # with a colon and thus the first element is a
            # dummy "" string not corresponding to any SNMP option
            # (or rather, corresponding to a router, if there had
            # been one...)
            shift @optsnmp;

            while ((scalar @tmpsnmp > 0)
               or (scalar @optsnmp > 0)) {
                $t = shift @tmpsnmp;
                $o = shift @optsnmp;

                if(not defined $t) {$t = "";}
                if(not defined $o) {$o = "";}

                if($t ne "")
                {
                    push @s, $t;
                } else {
                    push @s, $o;
                }
            }

            $snmpopt = ':' . (join ':', @s);
        }

        my $newopt={};  # Perhaps unecessary initialization but...

        foreach my $o (keys %$opt) {
            my $ovalue = $$opt{$o};

            $$newopt{$o} = $ovalue
            unless
                ($o =~ /^fullcmd$/ or
                 $o =~ /^community$/ or
                 $o =~ /^snmp-options$/ or
                 $o =~ /^global$/ or
                 $o =~ /^output$/
                 );

            # Ok, copy the --globals array from $$opt so we know
            # that which global(s) to print out into the config.
            push @{$$newopt{$o}}, @{$$opt{$o}} if ($o =~ /^global$/);

            # Go through these --global statements one by one.
            # If anyone of them contains Options[] for any of the
            # targets [_], [^] or [_], process those statements
            # tenderly and populate the $$flags{}{} hashes accordingly.
            for my $g (@{$$opt{"global"}}) {
                my ($t,$fs);
                $g =~ /^options\[([_^\$])\]:\s*(.*)$/i;
                $t = $1;
                $fs = $2;
                $t =~ s/_/default/;
                $t =~ s/\^/prepend/;
                $t =~ s/\$/append/;

                # If a line like "options[X]:" is found clear
                # all flags for that category and then go to next
                # --global 'Options[..' line if any.
                if ($fs =~ /^\s*$/) {
                    $$flags{$t} = {};
                    next;
                } else {
                    for my $f (split /\s*,\s*/,$fs) {
                        $$flags{$t}{$f} = "set";
                    }
                }
            }

            $$opt{$o} = [] if ($o =~ /^global$/);
        }

        # Now let this router get it's own copy of
        # the "currently effective" flags.
        # Note, Options[_] should only be considered
        # if Options[^] and Options[$] both are absent.

        my $newflags = {};

        if((0 == keys %{$$flags{prepend}})
            and (0== keys %{$$flags{append}})) {
            for my $f (keys %{$$flags{default}}) {
                $$newflags{$f}="set";
            }
        } else {
            for my $f (keys %{$$flags{prepend}},
                   keys %{$$flags{append}}) {
                $$newflags{$f}="set";
            }
        }

        if(defined $$opt{'dns-domain'}) {
            $dnsdomain=$$opt{'dns-domain'};
        } else {
            $dnsdomain="";
        }

        $routerkey =
            "${community}\@${routername}"
            . (($dnsdomain eq "")?"":".")
                . "${dnsdomain}${snmpopt}";

        $$routers{$routerkey}= {
            # rawname is the unprocessed string from the
            # command line.
            rawname     => $rawname,

            # opt is the commandline options which are
            # in effect for THIS particular router.
            opt         => $newopt,

            # noofrouter is the unique number for the
            # router.  The first router on the command
            # line is given number 1, the second number 2
            # and so on.
            noofrouter  => $$noofrouter,

            # flags contains which --global 'Options[^_$]: flags'
            # are effective for THIS particular router.
            flags       => $newflags,

            # community is the SNMP community used for the router
            community   => $community,

            # snmpopt is the SNMP options on the form
            # [port[:timeout[:retries[:backoff[:version]]]]]
            # The empty string simply means that no
            # specific SNMP options has been given.
            'snmp-options' => $snmpopt,
            snmpopt_current => $snmpopt,

            # dns-domain is a domain which should be added
            # to the routers hostname.
            # e.g if dns-domain is place.xyz and host is router
            # the host "router.place.xyz" will be polled.
            # If host is "router.dept" the poll will be against
            # "router.dept.place.xyz".
            'dns-domain' => $dnsdomain,

            # routername is the routers name as given on the
            # command line but with SNMP community (if given)
            # and SNMP options (if given) stripped.
            #
            # (Yes, routername COULD be on the form
            # "host.domain" or "host.subdomain.domain")
            routername  => $routername,

            # routerkey is the same as the has key used for the
            # router, which is the router name with everything
            # taken into account: community, dns-domain and
            # snmp-options.  This is the value used when doing
            # SNMP communication with the router.
            routerkey => $routerkey,
            };
    }
} # end addrouter

sub html_escape ($) {
    my $s = shift || '';
    $s =~ s/&/&amp;/g;
    $s =~  s/</&lt;/g;
    $s =~  s/>/&gt;/g;
    $s =~ s/[\n\r]+([^\n\r])/<BR>\n $1/g;
    return $s;
} # end html_escape

sub oid_pick ($$$;@){
    my $router = shift;
    my $v3opt = shift;
    my @oids = @_;
    local $SNMP_Session::suppress_warnings = 3;
    foreach my $oid (@oids){
        local $SNMP_Session::errmsg = undef;
        my $counter = snmpget($router,$v3opt,$oid);
        if (not defined $SNMP_Session::errmsg and defined $counter and $counter ne '' ) {
            debug('base',"oid_pick - found $oid to work for $router");
	    return $oid;
        }	    
    }
    debug('base',"oid_pick - none of ".(join ",",@oids)." seem to work for $router");
    return undef;
}


sub parsev3 ($) {
    my $opt = shift;
    my %v3opt;
	if (!exists ($$opt{username})) {
    		die "SMNP V3 requires a --username paramter as part of the User Security Model";
	} else {
		$v3opt{username} = $$opt{username};
	}
	$v3opt{contextname} = $$opt{contextname} if exists($$opt{contextname});
	if (exists ($$opt{authkey})) {
		die "Can't use both an --authkey and --authpassword in the User Security Model" if exists($$opt{authpassword});	
		$v3opt{authkey} = $$opt{authkey};
	}
	if (exists ($$opt{authpassword})) {
		die "Use of --authpassword requires --contextengineid" if !exists($$opt{contextengineid});
		$v3opt{authpassword} = $$opt{authpassword};
	}
	if (exists ($$opt{authprotocol})) {
		die "Only sha and md5 are defined for --authprotocol" if $$opt{authprotocol} !~ /^(md5|sha)$/i;
		die "--authprotocol can only be used with --authpassword or --authkey" if ! exists($$opt{authpassword}) and ! exists($$opt{authkey});
		($v3opt{authprotocol}) = (lc($$opt{authprotocol}) =~ /^(md5|sha)$/);
	}
	if (exists ($$opt{privkey})) {
		die "Can't use both an --privkey and --privpassword in the User Security Model" if exists($$opt{privpassword});	
		die "Can't have privacy parameters without authentication in the User security Model" if ! exists($$opt{authpassword}) and ! exists($$opt{authkey});
		$v3opt{privkey} = $$opt{privkey};
	}
	if (exists ($$opt{privpassword})) {
		die "Use of --privpassword requires --contextengineid" if !exists($$opt{contextengineid});
		die "Can't have privacy parameters without authentication in the User security Model" if ! exists($$opt{authpassword}) and ! exists($$opt{authkey});
		$v3opt{privpassword} = $$opt{privpassword};
	}
	if (exists ($$opt{privprotocol})) {
		die "Only des, 3des, 3desede, aes, aes128 are defined for --privprotocol" if $$opt{privprotocol} !~ /^(?:3?des(?:ede)?|aes(?:128)?)$/;
		die "--privprotocol can only be used with --privpassword or --privkey" if ! exists($$opt{privpassword}) and ! exists($$opt{privkey});
		$v3opt{privprotocol} = lc($$opt{privprotocol});
	}
	return %v3opt;
}
		
	
sub init () {
  snmpmapOID('sysObjectID' => '1.3.6.1.2.1.1.2.0',
             'CiscolocIfDescr' => '1.3.6.1.4.1.9.2.2.1.1.28',
             'CiscoCatalystPortName' => '1.3.6.1.4.1.9.5.1.4.1.1.4',
             'ppPortName' => '1.3.6.1.4.1.2272.1.4.10.1.1.35',
            'vlanTrunkPortDynamicStatus'=> '1.3.6.1.4.1.9.9.46.1.6.1.1.14',
             'vmVlan' => '1.3.6.1.4.1.9.9.68.1.2.2.1.2',
             'ifAlias' => '1.3.6.1.2.1.31.1.1.1.18');
} # end init

__END__

=pod

=head1 NAME

cfgmaker - Creates mrtg.cfg files (for mrtg-2.17.4)

=head1 SYNOPSIS

cfgmaker [options] [community@]router [[options] [community@]router ...]

=head1 OPTIONS

 --ifref=nr    interface references by Interface Number (default)
 --ifref=ip                     ... by Ip Address
 --ifref=eth                        ... by Ethernet Number
 --ifref=descr                      ... by Interface Description
 --ifref=name                       ... by Interface Name
 --ifref=type                       ... by Interface Type
                You may also use multiple options separated by commas,
               in which case the first available one is used:
               e.g.  --ifref=ip,name,nr

 --ifdesc=nr       interface description uses Interface Number (default)
 --ifdesc=ip                        ... uses Ip Address
 --ifdesc=eth                       ... uses Ethernet Number
 --ifdesc=descr                     ... uses Interface Description
 --ifdesc=name                      ... uses Interface Name
 --ifdesc=catname                   ... uses CatOS Interface Name
 --ifdesc=ppname                    ... uses Passport Port Name
 --ifdesc=alias                     ... uses Interface Alias
 --ifdesc=type                      ... uses Interface Type
                You may also use multiple options separated by commas,
               in which case the first available one is used:
               e.g.  --ifdesc=catname,ppname,descr,alias,ip,name,nr

 --if-filter=f     Test every interface against filter f to decide wether
                   or not to include that interface into the collection.
                   Currently f is being evaluated as a Perl expression
                   and it's truth value is used to reject or accept the
                   interface.
                   (Experimental, under development, might change)

 --if-template=templatefile
                   Replace the normal target entries for the interfaces
                   with an entry as specified by the contents in the file
                   templatefile.  The file is supposed to contain Perl
                   code to be executed to generate the lines for the
                   target in the configuration file.
                   (Experimental, under development, might change)

 --host-template=templatefile
                   In addition to creating targets for a host's interfaces
                   do also create targets for the host itself as specified
                   by the contents in the file templatefile.  The file is
                   supposed to contain Perl code to be executed to generate
                   the lines for the host related targets (such as CPU,
                   ping response time measurements etc.) in the config-
                   uration file.
                   (Experimental, under development, might change)

 --global "x: a"   add global config entries

 --nodefaultglobal do not include default global settings

 --no-down         do not look at admin or opr status of interfaces

 --show-op-down    show interfaces which are operatively down

 --zero-speed=spd  use this speed in bits-per-second as the interface
                   speed for all interfaces that return a speed of 0
                   via ifSpeed/ifHighSpeed.  100Mbps = 100000000

 --subdirs=format  give each router its own subdirectory, naming each per
                   "format", in which HOSTNAME and SNMPNAME will be
                   replaced by the values of those items -- for instance,
                   --subdirs=HOSTNAME or --subdirs="HOSTNAME (SNMPNAME)"

 --noreversedns    do not reverse lookup ip numbers

 --community=cmty  Set the default community string to "cmty" instead of
                   "public".

 --enable-ipv6     Enable IPv6 support, if the required libraries are
                   present. Numeric IPv6 addresses must be enclosed
                   in square brackets, e.g. public@[2001:760:4::1]:161

 --use-16bit       Use 16bit SNMP request IDs to query all routers.

 --snmp-options=:[<port>][:[<tmout>][:[<retr>][:[<backoff>][:<ver>]]]]

                   Specify default SNMP options to be appended to all
                   routers following.  Individual fields can be empty.
                   Routers following might override some or all of the
           options given to --snmp-options.

 --dns-domain=domain
           Specifies a domain to append to the name of all
           routers following.

 --nointerfaces    Don't do generate any configuration lines for interfaces,
                   skip the step of gathering interface information and
                   don't run any interface template code.

 --interfaces      Generate configuration lines for interfaces (this is the
                   default).  The main purpose of this option is to negate
                   an --nointerfaces appearing earlier on the command line.

 --help            brief help message
 --man             full documentation
 --version         print the version of cfgmaker

 --output=file     output filename default is STDOUT

=head1 DESCRIPTION

B<Cfgmaker> creates MRTG configuration files based on information
pulled from a router or another SNMP manageable device.

[I<community>B<@>]I<router>

I<Community> is the community name of the device you want to create a
configuration for. If not specified, it defaults to 'B<public>'; you might
want to try this first if you do not know the community name of a
device. If you are using the wrong community name you will get no
response from the device.

I<Router> is the DNS name or the IP number of an SNMP-managable device.
Following the name you can specify 6 further options separated by
colons.  The full syntax looks like this:

B<router>[:[B<prt>][:[B<tmout>][:[B<retr>][:[B<backoff>][:B<vers>]]]]]

Of special interest may be the last parameter, B<vers>.  If you set this to
'2' then your device will be queried with SNMP version 2 requests. This
allows you to poll the 64 bit traffic counters in the device and will thus work
much better with fast interfaces (no more counter overrun).  Note that the
order in which the routers are specified on the command line do matter as
the same order is used when the configuration file is generated.  The first
specified router has it's configuration lines genrated first, followed by
the lines belonging to the next router and so on.

Note that the first line of the generated cfg file will contain all the
commandline options you used for generating it. This is to allow for the
easy 'regeneration' in case you want to add newhosts or make some other
global change.

=head2 Configuration

Except for the B<--output> and B<--global> options, all options affect
only the routers following them on the command line.  If an option
specified earlier on the command line reappears later on the command
line with another value, the new value overrides the old value as far as
remaining routers are concerned.  This way options might be tailored for
groups of routers or for individual routers.

See B<--output> and B<--global> for how their behaviour is affected by
where or how many times they appear on the command line.

See the B<Examples> below on how to set an option differently for
multiple routers.

=over

=item B<--help>

Print a brief help message and exit.

=item B<--man>

Prints the manual page and exits.

=item B<--version>

Print the version of cfgmaker.  This should match the version of MRTG
for which config files are being created.

=item B<--ifref> B<nr>|B<ip>|B<eth>|B<descr>|B<name>

Select the interface identification method.  Default is B<nr> which
identifies the router interfaces by their number.  Unfortunately the
interface numbering scheme in an SNMP tree can change. Some routers
change their numbering when new interfaces are added, others change
thier numbering every full moon just for fun.

To work around this sad problem MRTG can identify interfaces by 4
other properties. None of these works for all interfaces, but you
should be able to find one which does fine for you. Note that
especially ethernet addrsses can be problematic as some routers have
the same ethernet address on most of their interface cards.

Select B<ip> to identify the interface by its IP number. Use B<eth> to
use the ethernet address for identification. Use B<descr> to use
the Interface description. Or use B<name> to use the Interface name.

You can specify multiple properties if you wish, separated by commas.
In this case, cfgmaker will use the first item in the list which
can provide unique identification.  This allows you to specify, for
example, to use IP address and to use ifName if this is not defined:
  --ifref ip,name

If your chosen method does not allow unique interface identification on
the device you are querying, B<cfgmaker> will tell you about it.

=item B<--ifdesc> B<nr>|B<ip>|B<eth>|B<descr>|B<name>|B<type>|B<alias>

Select what to use as the description of the interface.  The description
appears in the C<Title[]> property for the target as well as the text header
in the HTML code defined in the target's C<PageTop[]>.  Default is to use
B<nr> which is just the interface number which isn't always useful
to the viewer of the graphs.

There are 6 other properties which could be used.  Use B<ip> if you want
to use the interface's IP-address.  Use B<eth> if you want to use the
interface's ethernet address.  If you want a better description, you can
use either B<descr>, B<name> or B<alias>.  Exactly what each of these do
varies between different equipment so you might need to experiment.  For
instance, for a serial interface on a Cisco router running IOS using B<name>
might result in C<"S0"> being the interface description , B<descr> might result
in C<"Serial0"> and B<alias> might result in C<"Link to HQ"> (provided that is
what is used as the interface's C<description> in the router's configuration).

Finally, if you want to describe the interface by it's Btype
(i.e C<"ethernetCSMA">, C<"propPointtoPoint"> etc) you can use B<type>.

You can specify multiple properties if you wish, separated by commas.
In this case, cfgmaker will use the first item in the list which
is available for this interface.  This allows you to specify, for
example, to use any of the different aliases in order of preference.

=item B<--if-filter> 'B<filter-expression>'

First of all, this is under some development and is experimental.

Use this if you want to have better control over what interfaces gets
included into the configuration.  The B<filter-expression> is evaluated
as a piece of Perl code and is expected
to return a truth value.  If true, include the interface and if false,
exclude the interface.

For a further discussion on how these filters work, see the section
L<Details on Filters> below.

=item B<--if-template> B<template-file>

First of all, this is under some development and is experimental.

Use this if you want to control what the line for each target should look
like in the configuration file.  The contents of the file B<template-file>
will be evaluated as a Perl program which generates the lines using certain
variables for input and output.

For a further discussion on how these templates work, see the section
L<Details on Temaplates> below.

=item B<--host-template> B<template-file>

First of all, this is under some development and is experimental.

Use this if you want to have some extra targets related to the host itself
such as CPU utilization, ping response time to the host, number of busy
modems etc.  The contents of the file B<template-file> will be evaluated
once per host as a Perl program which generates the lines using certain
variables for input and output.

For a further discussion on how these templates work, see the section
L<Details on Templates> below.

=item B<--community> B<community-string>

Use this to set the community for the routers following on the command
line to B<community-string>.  Individual routers might overrride this
community string by using the syntax B<community>B<@>B<router>.

=item B<--enable-ipv6>

This option enables IPv6 support. It requires the appropriate perl
modules; if they are not found then IPv6 is disabled (see the ipv6
documentation).

cfgmaker will use IPv6 or IPv4 depending on the target. If the target
is a numeric address, the protocol depends on the type of address. If the
target is a hostname, cfgmaker will try to resolve the name first to an
IPv6 address then to an IPv4 address.

IPv6 numeric addresses must be specified between square braces.

For example:

 cfgmaker --enable-ipv6 [2001:760:4::1]:165:::2

If the target has both an IPv6 address and an IPv4 address with the same
hostname, cfgmaker first queries the target using IPv6 and falls back to
IPv4 if it fails. This is useful for targets which don't support SNMP
over IPv6.

=item B<--use-16bit>

This option forces the use of 16bit SNMP request IDs.  Some broken SNMP
agents do not accept 32bit request IDs.  Try to avoid this option as much
as possible, complain to your agent vendor instead.

=item B<--snmp-options>  :[B<port>][:[B<timeout>][:[B<retries>][:[B<backoff>][:B<version>]]]]

Use this to set the default SNMP options for all routers following on the
command line.  Individual values might be omitted as well as trailing
colons.  Note that routers might override individual (or all) values
specified by B<--snmp-options> by using the syntax

B<router>[:[B<port>][:[B<timeout>][:[B<retries>][:[B<backoff>][:B<version>]]]]]

=item B<--global> B<">I<bla: abc>B<">

Use this to add global options to the generated config file.
You can call B<--global> several times to add multiple options.
The line will appear in the configuration just before the config for
the next router appearing on the command line.

 --global "workdir: /home/mrtg"

If you want some default Options you might want to put

 --global "options[_]: growright,bits"

Specifying B<--global> after the last router on the command line will
create a line in the configuration file which will appear after all the
routers.

=item B<--noreversedns>

Do not try to reverse lookup IP numbers ... a must for DNS free environments.

=item B<--no-down>

Normally cfgmaker will not include interfaces which are marked
anything but administratively and operationally UP. With this
switch you get them all.

=item B<--show-op-down>

Include interfaces which are operatively down.

=item B<--zero-speed> I<speed>

Assign this speed in bits-per-second to all interfaces which return 0
for ifSpeed and ifHighSpeed.  Some switches, notably Foundry equipment,
return a speed of zero for some interfaces.  For example, to have
all interfaces reporting zero set to 100Mbps, use
--zero-speed=100000000.

=item B<--subdirs> I<format>

Give each router its own subdirectory for the HTML and graphics (or
.rrd) files.  The directory name is the given I<format> string with a
couple of pattern replacements.  The string "HOSTNAME" will be
replaced by the hostname of the router (however you specified it on
the B<cfgmaker> commandline -- it may be an actual hostname or just an
IP address), and "SNMPNAME" will be replaced with the device's idea of
its own name (the same name that appears on the right side of the
"Title" lines).  For instance, a call like:

 cfgmaker --subdirs=HOSTNAME__SNMPNAME public@10.10.0.18

would result in the generation of lines looking something like:

 Directory[10.10.0.18_1]: 10.10.0.18__fp2200-bothrip-1.3

=item B<--output> I<file>

Write the output from B<cfgmaker> into the file I<file>. The default
is to use C<STDOUT>. B<--output> is expected to appear only once on the
command line. If used multiple times, the file specified by the last
B<--output> will be used.

=item B<--nointerfaces>

Don't generate configuration lines for interfaces.

This makes cfgmaker skip all steps related to interfaces which means
it will not do any polling of the router to retrieve interface
information which speeds up the execution of cfgmaker and it will
neither run any interface templates.

=item B<--interfaces>

This makes cfgmaker generate configuration lines for interfaces (the
default behaviour).

The main usage of this option is to negate an --nointerfaces appearing
earlier on the command line.


=back

=head2 SNMP V3 Options

B<Cfgmaker> supports SNMP V3 using the B<Net:SNMP> perl module.  There are optional 
parameters affecting SNMP operation.

=over

=item --enablesnmpv3 {yes|no}

The B<--enablesnmpv3> option is an optional flag to check for the presence of 
the B<Net::SNMP> libraries.  B<Cfgmaker> will try to determine whether this flag is
required and will set the values automatically.

=back

=head3 SNMPv3 Arguments

A SNMP context is a collection of management information accessible by a SNMP
entity.  An item of management information may exist in more than one context
and a SNMP entity potentially has access to many contexts.  The combination of
a contextEngineID and a contextName unambiguously identifies a context within
an administrative domain.  In a SNMPv3 message, the contextEngineID and
contextName are included as part of the scopedPDU.  All methods that generate
a SNMP message optionally take a B<--contextengineid> and B<--contextname>
argument to configure these fields.

=over

=item Context Engine ID

The B<--contextengineid> argument expects a hexadecimal string representing
the desired contextEngineID.  The string must be 10 to 64 characters (5 to
32 octets) long and can be prefixed with an optional "0x".  Once the
B<--contextengineid> is specified it stays with the object until it is changed
again or reset to default by passing in the undefined value.  By default, the
contextEngineID is set to match the authoritativeEngineID of the authoritative
SNMP engine.

=item Context Name

The contextName is passed as a string which must be 0 to 32 octets in length
using the B<--contextname> argument.  The contextName stays with the object
until it is changed.  The contextName defaults to an empty string which
represents the "default" context.

=back

=head3 User-based Security Model Arguments

The User-based Security Model (USM) used by SNMPv3 requires that a securityName
be specified using the B<--username> argument.  The creation of a Net::SNMP
object with the version set to SNMPv3 will fail if the B<--username> argument
is not present.  The B<--username> argument expects a string 1 to 32 octets
in length.

Different levels of security are allowed by the User-based Security Model which
address authentication and privacy concerns.  A SNMPv3 target will
derive the security level (securityLevel) based on which of the following
arguments are specified.

By default a securityLevel of 'noAuthNoPriv' is assumed.  If the B<--authkey>
or B<--authpassword> arguments are specified, the securityLevel becomes
'authNoPriv'.  The B<--authpassword> argument expects a string which is at
least 1 octet in length.  Optionally, the B<--authkey> argument can be used so
that a plain text password does not have to be specified in a script.  The
B<--authkey> argument expects a hexadecimal string produced by localizing the
password with the authoritativeEngineID for the specific destination device.
The C<snmpkey> utility included with the Net::SNMP  distribution can be used to create
the hexadecimal string (see L<snmpkey>).

Two different hash algorithms are defined by SNMPv3 which can be used by the
Security Model for authentication.  These algorithms are HMAC-MD5-96 "MD5"
(RFC 1321) and HMAC-SHA-96 "SHA-1" (NIST FIPS PUB 180-1).   The default
algorithm used by the module is HMAC-MD5-96.  This behavior can be changed by
using the B<--authprotocol> argument.  This argument expects either the string
'md5' or 'sha' to be passed to modify the hash algorithm.

By specifying the arguments B<--privkey> or B<--privpassword> the securityLevel
associated with the object becomes 'authPriv'.  According to SNMPv3, privacy
requires the use of authentication.  Therefore, if either of these two
arguments are present and the B<--authkey> or B<--authpassword> arguments are
missing, the creation of the object fails.  The B<--privkey> and
B<--privpassword> arguments expect the same input as the B<--authkey> and
B<--authpassword> arguments respectively.

The User-based Security Model described in RFC 3414 defines a single encryption
protocol to be used for privacy.  This protocol, CBC-DES "DES" (NIST FIPS PUB
46-1), is used by default or if the string 'des' is passed to the
B<--privprotocol> argument.  By working with the Extended Security Options
Consortium http://www.snmp.com/eso/, the module also supports additional
protocols which have been defined in draft specifications.  The draft
http://www.snmp.com/eso/draft-reeder-snmpv3-usm-3desede-00.txt
defines the support of CBC-3DES-EDE "Triple-DES" (NIST FIPS 46-3) in the
User-based Security Model.  This protocol can be selected using the
B<--privprotocol> argument with the string '3desede'.  The draft
http://www.snmp.com/eso/draft-blumenthal-aes-usm-04.txt
describes the use of CFB128-AES-128/192/256 "AES" (NIST FIPS PUB 197) in the
USM. The three AES encryption protocols, differentiated by their key sizes,
can be selected by passing 'aescfb128', 'aescfb192', or 'aescfb256' to the
B<-privprotocol> argument.

=head2 Details on Filters

The purpose of the filters is to decide which interfaces to accept and
which interfaces to reject.  This decision is done for each interface by
evaluating the filter expression as a piece of Perl code and investigating
the result of the evaluation.  If true, accept the interface otherwise
reject it.

When working with filters, remember that Perl has it's own idea of what truth
and false is.  The empty string "" and the string "0" are false, all other
strings are true.  This further imples that any integer value of 0 is
false as well as any undef value.  It also implies that all references
are considered true.

As the filter is evaluated as a Perl expression, several useful constructs
in Perl are worth mentioning:

Expressions might be grouped by using parentheses "()".  Expressions might
be combined using boolean operators such as the following:

=over

=item "B<and>" (equivalent with "B<&&>")

Boolean "and" of the two expressions, is only true if both expressions are
true.  Example: I<expression1> B<and> I<expression2>

=item "B<or>" (equivalent with "B<||>")

Boolean "or" of the two expressions, is true if either or both expressions
are true.  Example: I<expression1> B<or> I<expression2>

=item "B<not>" (equivalent with "B<!>")

Boolean negation of a single expression.  Example:  B<not> I<expression> .
Yet another example: B<!>I<expression>

=back

(For more details on this I recommend a book on Perl)

=head3 Predefined Filter Variables

To facilitate, there are a number of predefined values available to use
in the filter.  Note that these variables are also available when templates
interfaces are evaluated (but not host templates).

Caveat:  All these variables' names begin with a dollar sign  ($), which
is a syntactic requirement for scalar variables in Perl.  The danger here
is that the dollar sign in many shells is an active character (often
used for shell variables exactly as in Perl variables) so it is important
to ensure that the Perl expression isn't evaluated by the command line
shell as shell code before being passed to cfgmaker as command line
arguments.  In shells like Bourne shell, ksh shell or bash shell, placing
the entire expression within single qoutes will avoid such accidental
evaluation:

 '--if-filter=($default_iftype && $if_admin)'

=over

=item B<$if_type>

This is an integer specifying the interface type as
per the SNMP standards and as reported by the polled device.  A complete list
of interface types would be impractical for this document , but there are
a number predefined varables below.  Normally, cfgmaker puts in the target's
PageTop this iftype value within paranthesis after the name of the interface
type. (e.g "propPointToPointSerial (22)").

Here's a list of some of the most common interface types by number:

   6 ethernetCsmacd
   7 iso88023Csmacd
   9 iso88025TokenRing
  15 fddi
  19 E1
  20 basicISDN
  21 primaryISDN
  22 propPointToPointSerial
  23 ppp
  24 softwareLoopback
  30 ds3
  32 frame-relay
  33 rs232
  37 atm
  39 sonet
  44 frameRelayService
  46 hssi
  49 aal5
  53 propVirtual
  62 Fast Ethernet (100BaseT)
  63 ISDN & X.25
  69 Full Duplex Fast Ethernet (100BaseFX)
  94 Asymetric Digital Subscriber Loop (ADSL)
 117 Gigabit Ethernet
 134 ATM Sub Interface

=item B<$default>

True if and only if cfgmaker normally should
accepted the interface based on the interfaces administrative and
operational state (taking the flags B<--no-down> and B<--show-op-down> into
account) and it's type (and a few other things).

=item B<$default_ifstate>

True if and only if cfgmaker would have accepted the
interface based on it's operational and administrative states (also taking
into account the presence of the flags B<--no-down> and B<--show-op-down>).

=item B<$default_iftype>

True if and only if cfgmaker would have accepted the
interface based on it's type (and a few type specific details in addition).

=item B<$if_admin>

True if and only if the interface is in an adminstrative up
state.

=item B<$if_oper>

True if and only if the interface is in an operational up
state.

=back

A number of variables are also predefined to easily decide if an interface
belong to a certain cathegory or not.  Below is all those variables listed
together with which if_type numbers each variable will be true for.  Note
that some variables refer to other variables as well.

=over

=item B<$if_is_ethernet>

True for ethernet interfaces (nr 6, 7, 26, 62, 69 and 117).

=item B<$if_is_isdn>

True for various ISDN interface types (nr 20, 21, 63, 75, 76 and 77)

=item B<$if_is_dialup>

True for dial-up interfaces such as PPP as well
as ISDN.  (nr 23, 81, 82 and 108 in addition to the numbers of
B<$if_is_isdn>).

=item B<$if_is_atm>

True for miscellaneous ATM related interface types (nr 37, 49, 107, 105,
106, 114 and 134).

=item B<$if_is_wan>

True for WAN interfaces point to point, Frame Relay and High Speed Serial ( 22,32,44,46)

=item B<$if_is_lan>

True for LAN interfaces (8, 9, 11, 15, 26, 55, 59, 60 and 115 in addition
to the numbers of B<$if_is_ethernet>).

=item B<$if_is_dsl>

True for ADSL, RDSL, HDSL and SDSL (nr 94, 95, 96, 97)

=item B<$if_is_loopback>

True for software loopback interfaces (nr 24)

=item B<$if_is_ciscovlan>

True for Cisco VLAN interfaces (interfaces with the
word Vlan or VLAN in their ifdescs)

=item B<$if_vlan_id>

Returns the vlan id associated with a specific port
on Cisco Catalyst switches under both Catalyst OS
and IOS, and 3Com switches.  If it is not a vlan interface, will return undef.

=item B<$if_cisco_trunk>

Returns the trunking state of a specific port
on Cisco Catalyst switches under both Catalyst OS
and IOS.  Returns "1" if the interface is a trunk, undef otherwise.

=item B<$if_MTU>

Returns the Maximum Transfer Unit associated with a specific port.

=back

Besides that, you can also use the variables defined for templates below.
Further, all the variables available in cfgmaker is at the scripts disposal
even if the use of such features is discouraged.  More "shortcuts" in the
form of variables and functions will be made available in the future instead.

=head3 Examples on Filters

The following filter will not affect which interfaces get's included or
excluded, it will make cfgmaker behave as normally.

 '--if-filter=$default'

The following filter will make cfgmaker exclude PPP (23) interfaces:

 '--if-filter=$default && $if_type!=23'

The following filter will make cfgmaker behave as usual except that it will
consider the operational state of an interface irrelevant but still reject
all interfaces which are administratively down.

 '--if-filter=$if_admin && $default_iftype'

=head2 Details on Templates

The contents of the template files are evaluated as a Perl program.  A
number or Perl variables are available for the program to read and others
are used to be written to.

As quite a few of the predefined variables has values which are are supposed
to be used in HTML code some of them have an "HTML-escaped" variant, e.g
$html_syslocation is the HTML escaped variant of $syslocation.  The HTML
escaping means that the chars "<", ">" and "&" are replaced by "&lt;",
"&gt;" and "&amp;" and that newlines embedded in the string are prepended
with "<BR>" and appended with a space character (if a newline is last in the
string it is not touched).

=head3 Writable Template Variables

These are the variables available to store the configuration lines in.
Some of them are initialized prior to the evaluation of the template but
such content normally is comments for inclusion in the final configuration
file so those variables might be reset to the empty string in the template
code to eliminate the comments.  The other way around is also possible, the
contents of these variables might be extended with further information
for various reasons such as debugging etc.

Once the template has been evaluated, the following happens:  if the
template is a interface template and the actual interface for some reason
is rejected and thus needs to be commented out, all the lines in the
variable B<$target_lines> are turned into comments by adding a hash mark
("#") at their beginning.  Then all the variables B<$head_lines>,
B<$problem_lines> , B<$target_lines> and B<$separator_lines>
are concatenated together to form the lines to add to the configuration file.

=over

=item B<$target_lines>

This variable is the placeholder for the configuration lines created
by the template.  B<$target_lines> is predefined to be empty when
the template code is evaluated.

=item B<$head_lines>

This variable is intended to be the placeholder for the comment line
appearing just before the target in the configuration file.  It is
initialized with that comment line before the evaluation of the template
code and if the template doesn't modify B<$head_lines> during evaluation,
the comment will look like usual in the config file.

=item B<$problem_lines>

This variable is intended to be the placholder for the comment lines
describing any problems which might have been encountered when trying
to add the target into the configuration.  For host templates it's
normally not used and for those it's predefined as the empty string.
For interface templates B<$problem_lines> is predefined with
the error description comments which cfgmaker normally would use for
rejected interfaces or as the empty string for accepted interfaces.

It is possible to test against B<$problem_lines> to find out if
an interface will be included or rejected but this is not recommended.
Test against B<$if_ok> instead.

=item B<$separator_lines>

This variable is the placeholder for the string to use as the separator
between the code for individual targets.  The contents of this variable
is put after each target (so the lines will appear after the end of the
last target in the config as well).

=back

=head3 Predefined Template Variables

All the variables below are available for interface templates to use.
For host templates, only those listed under L<Host and System Variables>
are available.

For interface templates the variables listed under
L<Predefined Filter Variables> are also available.

=head3 Host and System Variables

=over

=item B<$router_name>

This is the fully qualified name for the router.  It is affected by the
following items on the command line:  the router name itself and
B<--dns-domain>.

=item B<$router_connect>

This is the reference string for the router being polled.  It is on the
form community@router possibly followed by some snmp options.  It is
affected by the following items on the command line:  the router name
itself, B<--community>, B<--snmp-options> and B<--dns-domain>.
(There's no HTML escaped variant available)

=item B<$directory_name>

This variable should contain the directory name as cfgmaker normally would
use as the value for the "Directory[]" directive.  The value is determined
by the B<--subdirs> command line option.  If B<--subdirs> isn't specified
B<$directory_name> will be the empty string.  (There's no HTML escaped
variant available)

=item B<$syscontact>

This variable is the router's SNMP sysContact value.  (HTML escaped
variant: B<$html_syscontact>)

=item B<$sysname>

This variable is the router's SNMP sysName value.  (No HTML escaped
variant available)

=item B<$syslocation>

This variable is the router's SNMP sysLocation value.  (HTML escaped
variant: B<$html_syslocation>)

=item B<$sysdescr>

This variable is the router's SNMP sysDescr value.  It is normally not used
by cfgmaker but might be useful in a template.  (HTML escaped variant:
B<$html_sysdescr>)

=back

=head3 Interface Target Related Variables

=over

=item B<$target_name>

This is what cfgmaker normally would use as the the name of the target.
The target name is what is found within the square brackets, "[]", for target
directives.  (There's no HTML escaped variant available)

=item B<$if_ref>

This the reference string for the interface.  It is expected to be used
in the "Target[xyz]" directive to distinguish what interface to use.  The
value of this variable is affected by the B<--ifref> command line option.
It is normally used together with B<$router_connect>.
(There's no HTML escaped variant available)

=item B<$if_ok>

This variable is true if the interface is going to be included into the
configuration file, otherwise false.  Don't test against other variables
such as B<$problem_lines> to find out if an interface will be rejected
or not, use this B<$if_ok> instead.

=item B<$default_target_lines>

This variable contains all the target lines which cfgmaker by default outputs
for this interface.  It's useful if you want to have the "standard target"
but want to add some extra lines to it by using a template.

=back

By default cfgmaker uses the following directives for each target it
generates: Target[], SetEnv[], MaxBytes[], Title[], PageTop[] and if
there is any directory specified also the Directory[] directive.

To facilitate the creation of templates which generates target configs
which are similar to the default one, each of the above mentioned
directive lines have a corresponding variable containing the line as
cfgmaker would have output it by default.

Note that none of these have a HTML escaped variant, text in them is
HTML escaped where needed.  Also note that they do not have any newline
at the end.

=over

=item B<$default_target_directive>

This variable contains the default string for the Target[] directive line.

=item B<$default_setenv_directive>

This variable contains the default string for the SetEnv[] directive line.

=item B<$default_directory_directive>

This variable contains the default string for the Directory[] directive line
which means it is an empty string (with no newline) if there's no directory.

=item B<$default_maxbytes_directive>

This variable contains the default string for the MaxBytes[] directive line.

=item B<$default_title_directive>

This variable contains the default string for the Title[] directive line.

=item B<$default_pagetop_directive>

This variable contains the default string for the PageTop[] directive lines.

=back

=head3 Interface Network Configuration Variables

=over

=item B<$if_ip>

This variable should contain the IP-address of the interface, if any has
been assigned to it.  (There's no HTML escaped variant available)

=item B<$ifindex>

This variable is the SNMP ifIndex for the interface which per definition
always is an integer.  (There's no HTML escaped variant available)

=item B<$if_index>

Equivalent with B<$ifindex>.

=item B<$if_eth>

Contains the ethernet address of the interface, if any.  (There's no HTML
escaped variant available)

=item B<$if_speed>

This variable is the speed in bytes/second (with prefixes).  (There's no
HTML escaped variant available)

=item B<$if_speed_str>

This variable is a cooked speed description which is either in bits or
bytes depending on wether or not the bits option is active and also with
the proper prefix for the speed (k, M, G etc).  (No HTML escaped variant
available)

=item B<$if_type_desc>

This variable is a textual description of the interface type.  (HTML
escaped variant: B<$html_if_type_desc>)

=item B<$if_type_num>

This variable the integer value corresponding to the interface type (for a
listing for the value for the more common interface types, see the section
DETAILS ON FILTERS above).  (No HTML escaped variant available)

=item B<$if_dns_name>

This is the DNS name for the interface.  (No HTML escaped variant available)

=back

=head3 Interface Name, Description and Alias Variables

It might seem confusing with both I<Name>, I<Description> and I<Alias> in
this context and to some extent it is.  I<Name> and I<Description> are
usually supported on most equipment but how they are used varies, both
between manufacturers as well as between different cathegories of equipment
from the same manufacturer.  The I<Alias> is at least supported by Cisco
IOS, and that variable contains whatever is used in the IOS statement
called "description" for the interface (not to be confused with the SNMP
variables for I<Description>).

For better control from the command line consider B<$if_title_desc> which contents
are controlled by the B<--if-descr> command line option.

=over

=item B<$if_snmp_descr>

This variable should contain the "raw" description of the interface as
determined by the SNMP polling of the router.  (HTML escaped variant:
B<$html_if_snmp_descr>)

=item B<$if_snmp_name>

The "raw" name for the interface as provided by SNMP polling.  (HTML escaped
variant: B<$html_if_snmp_name>)

=item B<$if_snmp_alias>

The "raw" ifAlias for the interface as provided by SNMP polling. (HTML
escaped variant: B<$html_if_snmp_alias>)

=item B<$if_cisco_descr>

The "raw" CiscolocIfDescr for the interface as provided by SNMP polling.
(HTML escaped variant: B<$html_if_cisco_descr>)

=item B<$if_description>

This is the "cooked" description string for the interface, taking into account
the SNMP values found for the interface's RDescr, ifAlias and
CiscolocIfDescr.  (HTML escaped variant: B<$html_if_description>)

=item B<$if_title>

The full string cfgmaker by default would have used for the Title[] directive
in the configuration as well as the content of the topmost H1 tag in the
PageTop[].  Is composed by the contents of B<$desc_prefix>,
B<$if_title_desc> and B<$sysname>.

As B<$if_title> depends on B<$if_title_desc>, it is possible to indirectly
control B<$if_title> by using the command line option B<--if-descr>.

(HTML escaped variant: B<$html_if_title>)

=item B<$if_port_name>

If the host is a Cisco Catalyst LAN switch, this variable is the name of
that port.  (No HTML escaped variant available)

=item B<$if_pp_port_name>

If the host is a Nortel Passport LAN switch, this variable is the name of
that port.  (No HTML escaped variant available)

=item B<$desc_prefix>

This variable is a prefix of the description of what the target is to use in
the "Title[]" directive and in the H1 section of the "PageTop[]".  Default is
"Traffic analysis for ".  (HTML escaped variant: B<$html_desc_prefix>)

=item B<$if_title_desc>

This is the description of the interface normally used by cfgmaker as part
of the variable B<$if_title>.  The latter is used as the full string in the
"Title[]" directove and the H1 section in the PageTop[].

B<$if_title_desc> is controlled by the command line option B<--if-descr>
which indirectly controls the contents of B<$if_title>

(HTML escaped variant: B<$html_if_title_desc>)

=back

=head3 Help Functions for Templates

The following functions exists to facilitate the writing of host and
interface templates.

=over

=item B<html_escape(I<string>)>

B<html_escape()> takes a string as an argument and returns a new string
where the following substitutions has been done:  the chars "<", ">" and
"&" are replaced by "&lt;", "&gt;" and "&amp;" and that newlines embedded
in the string are prepended with "<BR>" and appended with a space character
(newlines at the end of the string are not touched).

=item B<oid_pick($router_connect,$v3opt,"oid1","oid2"...)>

This function will try to poll each of the oids specified until
it is successful or has run out of oids. It will return the name of the
first oid that worked or undef if it is not successful

=back

=head3 Example Template Files

=head4 Template Example 1: Eliminating Rejected Targets From Appearing

This template file generates exactly the same configuration code per
interface as cfgmaker does by default, with the exception that it eliminates
all lines (comments as well as config code) for an interface if the
interface happens to be rejected.

 if(not $problem_lines)
 {
   $target_lines .= <<ECHO;

 Target[$target_name]: $if_ref:$router_connect
 SetEnv[$target_name]: MRTG_INT_IP="$if_ip" MRTG_INT_DESCR="$if_snmp_descr"
 ECHO

   if ($directory_name) {
       $target_lines .= "Directory[$target_name]: $directory_name\n";
   }

   $target_lines .= <<ECHO;
 MaxBytes[$target_name]: $if_speed
 Title[$target_name]: $html_desc_prefix$html_if_title_desc -- $sysname
 PageTop[$target_name]: <h1>$html_desc_prefix$html_if_title_desc -- $sysname</h1>
		<div id="sysdetails">
			<table>
				<tr>
					<td>System:</td>
					<td>$sysname in $html_syslocation</td>
				</tr>
				<tr>
					<td>Maintainer:</td>
					<td>$html_syscontact</td>
				</tr>
				<tr>
					<td>Description:</td>
					<td>$html_if_description</td>
				</tr>
				<tr>
					<td>ifType:</td>
					<td>$html_if_type_desc ($if_type_num)</td>
				</tr>
				<tr>
					<td>ifName:</td>
					<td>$html_if_snmp_name</td>
				</tr>
 ECHO

   $target_lines .= <<ECHO if defined $if_port_name;
				<tr>
					<td>Port Name:</td>
					<td>$if_port_name</td>
				</tr>
 ECHO

   $target_lines .= <<ECHO if defined $if_pp_port_name;
				<tr>
					<td>Port Name:</td>
					<td>$if_pp_port_name</td>
				</tr>
 ECHO

   $target_lines .= <<ECHO;
				<tr>
					<td>Max Speed:</td>
					<td>$if_speed_str</td>
				</tr>
 ECHO

   $target_lines .= <<ECHO if $if_ip;
				<tr>
					<td>Ip:</td>
					<td>$if_ip ($if_dns_name)</td>
				</tr>
 ECHO

   $target_lines .= <<ECHO;
			</table>
		</div>
 ECHO
 } else {
   $head_lines="";
   $problem_lines="";
   $target_lines="";
   $separator_lines="";
 }

=head3 Template Example 2: Simplier Version of Example 1

Example 1 was partly intended to demonstrate how to customize the generation
of interface targets but also to provide a hint of how the variables are
used in the "default" template which one could consider that cfgmaker
normally uses.

If you're only intrested in the easiest way of entirely eliminating those
reject interfaces, the template below would do the job as well by using
B<$default_target_lines>.

 if($if_ok) {
  $target_lines = $default_target_lines;
 } else {
   $head_lines="";
   $problem_lines="";
   $target_lines="";
   $separator_lines="";
 }

=head3 Template Example 3: Creating CPU Targets for Hosts

Below is an example of a host template.

 $head_lines .= <<ECHO;
 #---------------------------------------------------------------------
 ECHO

 my $target_name = $router_name . ".cpu";

 $target_lines .= <<ECHO;

 YLegend[$target_name]: Percentage CPU load
 ShortLegend[$target_name]: %
 Legend1[$target_name]: CPU load in %
 Legend2[$target_name]:
 Legend3[$target_name]: Max Observed CPU load
 Legend4[$target_name]:
 LegendI[$target_name]: &nbsp;CPU Load:
 LegendO[$target_name]:
 WithPeak[$target_name]: ywm
 MaxBytes[$target_name]: 100
 Options[$target_name]: growright, gauge, nopercent
 Title[$target_name]: $router_name CPU load
 Target[$target_name]: 1.3.6.1.4.1.9.2.1.58.0&1.3.6.1.4.1.9.2.1.58.0:$router_connect
 PageTop[$target_name]: <h1>$router_name CPU load</h1>
		<div>
			<table>
				<tr>
					<td>System:</td>
					<td>$router_name in $html_syslocation</td>
				</tr>
				<tr>
					<td>Maintainer:</td>
					<td>$html_syscontact</td>
				</tr>
				<tr>
					<td>Description:</td>
					<td>$html_sysdescr</td>
				</tr>
				<tr>
					<td>Resource:</td>
					<td>CPU.</td>
				</tr>
			</table>
		</div>
 ECHO


=head1 EXAMPLES

The first example creates a config file for I<router.place.xyz>:  the router
has the community name I<public>.  Interfaces get identified by their
IP number.  Two global options get added to the config file.  The
config file gets redirected to I<mrtg.conf>.  The '\' signs at the end
of the line mean that this command should be written on a single line.

 cfgmaker --global "WorkDir: /home/tobi"           \
          --global "Options[_]: growright,bits"    \
          --ifref=ip                               \
          public@router.place.xyz > mrtg.cfg

Note: if cfgmaker is not in your path, but you are in the directory where
cfgmaker is stored, you can start it with ./cfgmaker

The next example creates a config file for four devices:
I<router1.place.xyz>, I<router2.place.xyz>, I<switch1.place.xyz> and
I<switch2.place.xyz> all with the community I<public>.

The two routers will have B<--ifref> set to B<descr> whilst the two
switches will use B<--ifref> set to B<name>.  Further the routers will
use B<--ifdesc> set to B<alias> and I<switch1.place.xyz> will use
B<--ifdesc> set to B<descr> whilst I<switch2.place.xyz> use B<name> instead.

Finally, there will be two Options lines inserted in the configuration:
One will be in the beginning, whilst the other will be inserted after
the lines related to the two routers but before those lines related
to the switches.

 cfgmaker --global "WorkDir: /home/tobi"           \
          --global "Options[_]: growright,bits"    \
          --ifref=descr                            \
          --ifdesc=alias                           \
          public@router1.place.xyz                 \
          public@router2.place.xyz                 \
          --global "Options[_]: growright"         \
          --ifref=name                             \
          --ifdesc=descr                           \
          public@switch1.place.xyz                 \
          --ifdesc=name                            \
          public@switch2.place.xyz > mrtg.cfg


The next example demonstrates how to use the B<--community>,
B<--snmp-options> and B<--dns-domain> to make the command line
simpler.  All the equipment will use the community I<hidden>, except for
the ppp-server which use community I<access>.  All equipment uses these
SNMP options: B<1s timeout>, B<1 retry> and B<SNMP version 2> (B<backoff> and
B<port> is unspecified which means they use the default values).
The exception again is the ppp-server which uses B<SNMP version 1>.
Finally, all the equipment is part of the domain I<place.xyz>, except
for the ppp-server which is part of the domain I<remote.place.xyz>.
Note that the latter is achieved simply by specifying the name
of the ppp-server to be I<ppp-server.B<remote>> .

 cfgmaker --global "WorkDir: /home/tobi"           \
          --global "Options[_]: growright,bits"    \
          --dns-domain=place.xyz                   \
          --community=hidden                       \
          --snmp-options=::1:1::2                  \
          router1                                  \
          router2                                  \
          router3                                  \
          router4                                  \
          router5                                  \
          switch1                                  \
          switch2                                  \
          switch3                                  \
          switch4                                  \
          switch5                                  \
          switch6                                  \
          switch7                                  \
          access@ppp-server.remote:::::1 > mrtg.cfg


=head1 SEE ALSO

L<mrtg-reference>

=head1 AUTHOR

Tobias Oetiker E<lt>tobi@oetiker.chE<gt> and
Jakob Ilves E<lt>jakob.ilves@oracle.comE<gt>


=head1 LICENSE

GNU General Public License

=head1 COPYRIGHT

Cfgmaker is Copyright 2000 by Tobias Oetiker E<lt>tobi@oetiker.chE<gt>

=cut