/usr/lib/ipsec/_updown_espmark is in strongswan-starter 5.2.1-6+deb8u6.
This file is owned by root:root, with mode 0o755.
The actual contents of the file can be viewed below.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 | #! /bin/sh
# iproute2 version, default updown script
#
# Copyright (C) 2003-2004 Nigel Meteringham
# Copyright (C) 2003-2004 Tuomo Soini
# Copyright (C) 2002-2004 Michael Richardson
# Copyright (C) 2005 Andreas Steffen <andreas.steffen@strongsec.com>
#
# This program is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by the
# Free Software Foundation; either version 2 of the License, or (at your
# option) any later version. See <http://www.fsf.org/copyleft/gpl.txt>.
#
# This program is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
# or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
# for more details.
# CAUTION: Installing a new version of strongSwan will install a new
# copy of this script, wiping out any custom changes you make. If
# you need changes, make a copy of this under another name, and customize
# that, and use the (left/right)updown parameters in ipsec.conf to make
# FreeS/WAN use yours instead of this default one.
# things that this script gets (from ipsec_pluto(8) man page)
#
#
# PLUTO_VERSION
# indicates what version of this interface is being
# used. This document describes version 1.1. This
# is upwardly compatible with version 1.0.
#
# PLUTO_VERB
# specifies the name of the operation to be performed
# (prepare-host, prepare-client, up-host, up-client,
# down-host, or down-client). If the address family
# for security gateway to security gateway communica-
# tions is IPv6, then a suffix of -v6 is added to the
# verb.
#
# PLUTO_CONNECTION
# is the name of the connection for which we are
# routing.
#
# PLUTO_INTERFACE
# is the name of the ipsec interface to be used.
#
# PLUTO_ME
# is the IP address of our host.
#
# PLUTO_MY_ID
# is the ID of our host.
#
# PLUTO_MY_CLIENT
# is the IP address / count of our client subnet. If
# the client is just the host, this will be the
# host's own IP address / max (where max is 32 for
# IPv4 and 128 for IPv6).
#
# PLUTO_MY_SOURCEIP
# if non-empty, then the source address for the route will be
# set to this IP address.
#
# PLUTO_MY_PROTOCOL
# is the IP protocol that will be transported.
#
# PLUTO_MY_PORT
# is the UDP/TCP port to which the IPsec SA is
# restricted on our side.
#
# PLUTO_PEER
# is the IP address of our peer.
#
# PLUTO_PEER_ID
# is the ID of our peer.
#
# PLUTO_PEER_CLIENT
# is the IP address / count of the peer's client sub-
# net. If the client is just the peer, this will be
# the peer's own IP address / max (where max is 32
# for IPv4 and 128 for IPv6).
#
# PLUTO_PEER_PROTOCOL
# is the IP protocol that will be transported.
#
# PLUTO_PEER_PORT
# is the UDP/TCP port to which the IPsec SA is
# restricted on the peer side.
#
# PLUTO_XAUTH_ID
# is an optional user ID employed by the XAUTH protocol
#
# PLUTO_MARK_IN
# is an optional XFRM mark set on the inbound IPsec SA
#
# PLUTO_MARK_OUT
# is an optional XFRM mark set on the outbound IPsec SA
#
# PLUTO_UDP_ENC
# contains the remote UDP port in the case of ESP_IN_UDP
# encapsulation
#
# logging of VPN connections
#
# tag put in front of each log entry:
TAG=vpn
#
# syslog facility and priority used:
FAC_PRIO=local0.notice
#
# to create a special vpn logging file, put the following line into
# the syslog configuration file /etc/syslog.conf:
#
# local0.notice -/var/log/vpn
#
# check interface version
case "$PLUTO_VERSION" in
1.[0]) # Older Pluto?!? Play it safe, script may be using new features.
echo "$0: obsolete interface version \`$PLUTO_VERSION'," >&2
echo "$0: called by obsolete Pluto?" >&2
exit 2
;;
1.*) ;;
*) echo "$0: unknown interface version \`$PLUTO_VERSION'" >&2
exit 2
;;
esac
# check parameter(s)
case "$1:$*" in
':') # no parameters
;;
ipfwadm:ipfwadm) # due to (left/right)firewall; for default script only
;;
custom:*) # custom parameters (see above CAUTION comment)
;;
*) echo "$0: unknown parameters \`$*'" >&2
exit 2
;;
esac
# utility functions for route manipulation
# Meddling with this stuff should not be necessary and requires great care.
uproute() {
doroute add
ip route flush cache
}
downroute() {
doroute delete
ip route flush cache
}
addsource() {
st=0
if ! ip -o route get ${PLUTO_MY_SOURCEIP%/*} | grep -q ^local
then
it="ip addr add ${PLUTO_MY_SOURCEIP%/*}/32 dev $PLUTO_INTERFACE"
oops="`eval $it 2>&1`"
st=$?
if test " $oops" = " " -a " $st" != " 0"
then
oops="silent error, exit status $st"
fi
if test " $oops" != " " -o " $st" != " 0"
then
echo "$0: addsource \`$it' failed ($oops)" >&2
fi
fi
return $st
}
doroute() {
st=0
parms="$PLUTO_PEER_CLIENT"
parms2=
if [ -n "$PLUTO_NEXT_HOP" ]
then
parms2="via $PLUTO_NEXT_HOP"
fi
parms2="$parms2 dev $PLUTO_INTERFACE"
if [ -z "$PLUTO_MY_SOURCEIP" ]
then
for dir in /etc/sysconfig /etc/conf.d; do
if [ -f "$dir/defaultsource" ]
then
. "$dir/defaultsource"
fi
done
if [ -n "$DEFAULTSOURCE" ]
then
PLUTO_MY_SOURCEIP=$DEFAULTSOURCE
fi
fi
parms3=
if test "$1" = "add" -a -n "$PLUTO_MY_SOURCEIP"
then
addsource
parms3="$parms3 src ${PLUTO_MY_SOURCEIP%/*}"
fi
case "$PLUTO_PEER_CLIENT_NET/$PLUTO_PEER_CLIENT_MASK" in
"0.0.0.0/0.0.0.0")
# opportunistic encryption work around
# need to provide route that eclipses default, without
# replacing it.
it="ip route $1 0.0.0.0/1 $parms2 $parms3 &&
ip route $1 128.0.0.0/1 $parms2 $parms3"
;;
*) it="ip route $1 $parms $parms2 $parms3"
;;
esac
oops="`eval $it 2>&1`"
st=$?
if test " $oops" = " " -a " $st" != " 0"
then
oops="silent error, exit status $st"
fi
if test " $oops" != " " -o " $st" != " 0"
then
echo "$0: doroute \`$it' failed ($oops)" >&2
fi
return $st
}
# define ESP mark
ESP_MARK=50
# add the following static rule to the INPUT chain in the mangle table
# iptables -t mangle -A INPUT -p 50 -j MARK --set-mark 50
# NAT traversal via UDP encapsulation is supported with the rule
# iptables -t mangle -A INPUT -p udp --dport 4500 -j MARK --set-mark 50
# in the presence of KLIPS and ipsecN interfaces do not use ESP mark rules
if [ `echo "$PLUTO_INTERFACE" | grep "ipsec"` ]
then
CHECK_MARK=""
else
CHECK_MARK="-m mark --mark $ESP_MARK"
fi
# are there port numbers?
if [ "$PLUTO_MY_PORT" != 0 ]
then
S_MY_PORT="--sport $PLUTO_MY_PORT"
D_MY_PORT="--dport $PLUTO_MY_PORT"
fi
if [ "$PLUTO_PEER_PORT" != 0 ]
then
S_PEER_PORT="--sport $PLUTO_PEER_PORT"
D_PEER_PORT="--dport $PLUTO_PEER_PORT"
fi
# resolve octal escape sequences
PLUTO_MY_ID=`printf "$PLUTO_MY_ID"`
PLUTO_PEER_ID=`printf "$PLUTO_PEER_ID"`
# the big choice
case "$PLUTO_VERB:$1" in
prepare-host:*|prepare-client:*)
# delete possibly-existing route (preliminary to adding a route)
case "$PLUTO_PEER_CLIENT_NET/$PLUTO_PEER_CLIENT_MASK" in
"0.0.0.0/0.0.0.0")
# need to provide route that eclipses default, without
# replacing it.
parms1="0.0.0.0/1"
parms2="128.0.0.0/1"
it="ip route delete $parms1 2>&1 ; ip route delete $parms2 2>&1"
oops="`ip route delete $parms1 2>&1 ; ip route delete $parms2 2>&1`"
;;
*)
parms="$PLUTO_PEER_CLIENT"
it="ip route delete $parms 2>&1"
oops="`ip route delete $parms 2>&1`"
;;
esac
status="$?"
if test " $oops" = " " -a " $status" != " 0"
then
oops="silent error, exit status $status"
fi
case "$oops" in
*'RTNETLINK answers: No such process'*)
# This is what route (currently -- not documented!) gives
# for "could not find such a route".
oops=
status=0
;;
esac
if test " $oops" != " " -o " $status" != " 0"
then
echo "$0: \`$it' failed ($oops)" >&2
fi
exit $status
;;
route-host:*|route-client:*)
# connection to me or my client subnet being routed
uproute
;;
unroute-host:*|unroute-client:*)
# connection to me or my client subnet being unrouted
downroute
;;
up-host:*)
# connection to me coming up
# If you are doing a custom version, firewall commands go here.
iptables -I INPUT 1 -i $PLUTO_INTERFACE -p $PLUTO_MY_PROTOCOL \
-s $PLUTO_PEER_CLIENT_NET/$PLUTO_PEER_CLIENT_MASK $S_PEER_PORT \
-d $PLUTO_ME $D_MY_PORT $CHECK_MARK -j ACCEPT
iptables -I OUTPUT 1 -o $PLUTO_INTERFACE -p $PLUTO_PEER_PROTOCOL \
-s $PLUTO_ME $S_MY_PORT \
-d $PLUTO_PEER_CLIENT_NET/$PLUTO_PEER_CLIENT_MASK $D_PEER_PORT -j ACCEPT
#
if [ "$PLUTO_PEER_CLIENT" = "$PLUTO_PEER/32" ]
then
logger -t $TAG -p $FAC_PRIO \
"+ $PLUTO_PEER_ID $PLUTO_PEER -- $PLUTO_ME"
else
logger -t $TAG -p $FAC_PRIO \
"+ $PLUTO_PEER_ID $PLUTO_PEER_CLIENT == $PLUTO_PEER -- $PLUTO_ME"
fi
;;
down-host:*)
# connection to me going down
# If you are doing a custom version, firewall commands go here.
# connection to me going down
# If you are doing a custom version, firewall commands go here.
iptables -D INPUT -i $PLUTO_INTERFACE -p $PLUTO_MY_PROTOCOL \
-s $PLUTO_PEER_CLIENT_NET/$PLUTO_PEER_CLIENT_MASK $S_PEER_PORT \
-d $PLUTO_ME $D_MY_PORT $CHECK_MARK -j ACCEPT
iptables -D OUTPUT -o $PLUTO_INTERFACE -p $PLUTO_PEER_PROTOCOL \
-s $PLUTO_ME $S_MY_PORT \
-d $PLUTO_PEER_CLIENT_NET/$PLUTO_PEER_CLIENT_MASK $D_PEER_PORT -j ACCEPT
#
if [ "$PLUTO_PEER_CLIENT" = "$PLUTO_PEER/32" ]
then
logger -t $TAG -p $FAC_PRIO -- \
"- $PLUTO_PEER_ID $PLUTO_PEER -- $PLUTO_ME"
else
logger -t $TAG -p $FAC_PRIO -- \
"- $PLUTO_PEER_ID $PLUTO_PEER_CLIENT == $PLUTO_PEER -- $PLUTO_ME"
fi
;;
up-client:)
# connection to my client subnet coming up
# If you are doing a custom version, firewall commands go here.
iptables -I FORWARD 1 -o $PLUTO_INTERFACE -p $PLUTO_PEER_PROTOCOL \
-s $PLUTO_MY_CLIENT_NET/$PLUTO_MY_CLIENT_MASK $S_MY_PORT \
-d $PLUTO_PEER_CLIENT_NET/$PLUTO_PEER_CLIENT_MASK $D_PEER_PORT -j ACCEPT
iptables -I FORWARD 1 -i $PLUTO_INTERFACE -p $PLUTO_MY_PROTOCOL \
-s $PLUTO_PEER_CLIENT_NET/$PLUTO_PEER_CLIENT_MASK $S_PEER_PORT \
-d $PLUTO_MY_CLIENT_NET/$PLUTO_MY_CLIENT_MASK $D_MY_PORT \
$CHECK_MARK -j ACCEPT
#
if [ "$PLUTO_PEER_CLIENT" = "$PLUTO_PEER/32" ]
then
logger -t $TAG -p $FAC_PRIO \
"+ $PLUTO_PEER_ID $PLUTO_PEER -- $PLUTO_ME == $PLUTO_MY_CLIENT"
else
logger -t $TAG -p $FAC_PRIO \
"+ $PLUTO_PEER_ID $PLUTO_PEER_CLIENT == $PLUTO_PEER -- $PLUTO_ME == $PLUTO_MY_CLIENT"
fi
;;
down-client:)
# connection to my client subnet going down
# If you are doing a custom version, firewall commands go here.
iptables -D FORWARD -o $PLUTO_INTERFACE -p $PLUTO_PEER_PROTOCOL \
-s $PLUTO_MY_CLIENT_NET/$PLUTO_MY_CLIENT_MASK $S_MY_PORT \
-d $PLUTO_PEER_CLIENT_NET/$PLUTO_PEER_CLIENT_MASK $D_PEER_PORT -j ACCEPT
iptables -D FORWARD -i $PLUTO_INTERFACE -p $PLUTO_MY_PROTOCOL \
-s $PLUTO_PEER_CLIENT_NET/$PLUTO_PEER_CLIENT_MASK $S_PEER_PORT \
-d $PLUTO_MY_CLIENT_NET/$PLUTO_MY_CLIENT_MASK $D_MY_PORT \
$CHECK_MARK -j ACCEPT
#
if [ "$PLUTO_PEER_CLIENT" = "$PLUTO_PEER/32" ]
then
logger -t $TAG -p $FAC_PRIO -- \
"- $PLUTO_PEER_ID $PLUTO_PEER -- $PLUTO_ME == $PLUTO_MY_CLIENT"
else
logger -t $TAG -p $FAC_PRIO -- \
"- $PLUTO_PEER_ID $PLUTO_PEER_CLIENT == $PLUTO_PEER -- $PLUTO_ME == $PLUTO_MY_CLIENT"
fi
;;
up-client:ipfwadm)
# connection to client subnet, with (left/right)firewall=yes, coming up
# This is used only by the default updown script, not by your custom
# ones, so do not mess with it; see CAUTION comment up at top.
ipfwadm -F -i accept -b -S $PLUTO_MY_CLIENT_NET/$PLUTO_MY_CLIENT_MASK \
-D $PLUTO_PEER_CLIENT_NET/$PLUTO_PEER_CLIENT_MASK
;;
down-client:ipfwadm)
# connection to client subnet, with (left/right)firewall=yes, going down
# This is used only by the default updown script, not by your custom
# ones, so do not mess with it; see CAUTION comment up at top.
ipfwadm -F -d accept -b -S $PLUTO_MY_CLIENT_NET/$PLUTO_MY_CLIENT_MASK \
-D $PLUTO_PEER_CLIENT_NET/$PLUTO_PEER_CLIENT_MASK
;;
#
# IPv6
#
prepare-host-v6:*|prepare-client-v6:*)
;;
route-host-v6:*|route-client-v6:*)
# connection to me or my client subnet being routed
#uproute_v6
;;
unroute-host-v6:*|unroute-client-v6:*)
# connection to me or my client subnet being unrouted
#downroute_v6
;;
up-host-v6:*)
# connection to me coming up
# If you are doing a custom version, firewall commands go here.
;;
down-host-v6:*)
# connection to me going down
# If you are doing a custom version, firewall commands go here.
;;
up-client-v6:)
# connection to my client subnet coming up
# If you are doing a custom version, firewall commands go here.
;;
down-client-v6:)
# connection to my client subnet going down
# If you are doing a custom version, firewall commands go here.
;;
*) echo "$0: unknown verb \`$PLUTO_VERB' or parameter \`$1'" >&2
exit 1
;;
esac
|