kdump-tools 1:1.6.1-1 / usr / sbin / kdump-config

#!/bin/bash

# kdump-config
# Copyright (C) 2007-2009 Hewlett-Packard Development Company, L.P.
# Written by Terry Loftin <terry.loftin@hp.com>
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License along
# with this program; if not, write to the Free Software Foundation, Inc.,
# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.

# kdump-config
# 	a shell script utility to manage:
#	* loading a kdump kernel
#	* unloading a kdump kernel
#	* saving a vmcore kdump kernel
#	* determining the status of kdump
#	* propagate ssh key to remote host

PATH=/bin:/usr/bin:/sbin:/usr/sbin
NAME=${NAME:="kdump-config"}

. /lib/lsb/init-functions
. /lib/init/vars.sh

# Global Setup
KDUMP_DEFAULTS=/etc/default/kdump-tools
[ -r $KDUMP_DEFAULTS ] && . $KDUMP_DEFAULTS

KEXEC=/sbin/kexec
[ -e $KEXEC ] || exit 1;

KVER=`uname -r`
ARCH=`uname -m`

# Set up defaults
KDUMP_SYSCTL=${KDUMP_SYSCTL:="kernel.panic_on_oops=1"}
KDUMP_COREDIR=${KDUMP_COREDIR:=/var/crash}
KDUMP_DUMP_DMESG=${KDUMP_DUMP_DMESG:=1}
KDUMP_DIR="/var/lib/kdump"
KDUMP_NUM_DUMPS=${KDUMP_NUM_DUMPS:=0}
NFS_TIMEO=${NFS_TIMEO:=600}
NFS_RETRANS=${NFS_RETRANS:=3}
MAKEDUMP_ARGS=${MAKEDUMP_ARGS:="-c -d 31"}
KDUMP_CMDLINE_APPEND=${KDUMP_CMDLINE_APPEND:="irqpoll nr_cpus=1 nousb systemd.unit=kdump-tools.service ata_piix.prefer_ms_hyperv=0"}
KDUMP_KERNEL_HOOK="/etc/kernel/postinst.d/kdump-tools"
[ -d $KDUMP_COREDIR ] || mkdir -p $KDUMP_COREDIR ;

IOMEM_ADDR=`grep -i "Crash kernel" /proc/iomem | sed "s/-..*//" | sed "s/^[ 0]*/0x/"`

# Constants
vmcore_file=/proc/vmcore
sys_kexec_crash=/sys/kernel/kexec_crash_loaded
sys_fadump_enabled=/sys/kernel/fadump_enabled
sys_fadump_registered=/sys/kernel/fadump_registered
kexec_cmd_file=$KDUMP_COREDIR/kexec_cmd

# DUMP_MODE = kdump/fadump
# The default dump mode is kdump.
DUMP_MODE="kdump"

# If /sys/kernel/fadump_enabled is set to `1`, use fadump as dump mechanism
if [ -e $sys_fadump_enabled ] && [ `cat $sys_fadump_enabled` -eq 1 ]; then
	DUMP_MODE="fadump"
fi

# Utility Functions
#
function kdump_help()
{
cat <<EOHELP
Usage:
kdump-config {help|test|show|status|load|unload|savecore|propagate|symlinks kernel-version}"
  help      - print this page
  test      - Do a dry-run of kdump kernel load command by showing
              the kernels and parameters that will be used and echo'ing
              the kexec command. The kexec command will not be executed.
              If using fadump, check if required sysfs directories exist.
  show      - Show dump mode, status, any current parameters.
              Show kexec command for kdump.
  status    - evaluate /sys/kernel/{kexec_crash_loaded,fadump_registered}
              depending on dump mode. Print appropriate message
  load      - Locate the kdump kernel, debug kernel, and establish links for
              makedumpfile.  Then load the kdump kernel using kexec
              If using fadump, register.
  unload    - unload the kdump kernel using kexec
              If using fadump, unregister.
  savecore  - use previously made links to save /proc/vmcore
  propagate - Send public ssh key to remote host for passwordless connection
  symlinks  - Verify and create vmlinuz and initrd.img links in /var/lib/kdump
              according to the provided kernel version. If the target
              initrd.img file is absent, it will create it.
EOHELP
}

function kdump_show()
{
	echo "DUMP_MODE:        $DUMP_MODE"
	echo "USE_KDUMP:        $USE_KDUMP"
	echo "KDUMP_SYSCTL:     $KDUMP_SYSCTL"
	echo "KDUMP_COREDIR:    $KDUMP_COREDIR"
	if [ "$DUMP_MODE" == "kdump" ]; then
		echo "crashkernel addr: $IOMEM_ADDR"
	fi
	if [ -h "$KDUMP_KERNEL" ];then
		echo "   "$(file $KDUMP_KERNEL)
	else
		echo "   "$KDUMP_KERNEL
	fi
	echo "kdump initrd: "
	if [ -h "$KDUMP_INITRD" ];then
		echo "   "$(file $KDUMP_INITRD)
	else
		echo "   "$KDUMP_INITRD
	fi

	if [ -n "$SSH" ];then
		echo "SSH:              $SSH"
		SSH_KEY="${SSH_KEY:=/root/.ssh/kdump_id_rsa}"
		echo "SSH_KEY:          $SSH_KEY"
	fi
	if [ -n "$NFS" ]; then
		echo "NFS:              $NFS"
		echo "NFS_TIMEO:        ${NFS_TIMEO:=600}"
		echo "NFS_RETRANS       ${NFS_RETRANS:=3}"
	fi

	if [ -n "$SSH" ] || [ -n "$NFS" ]; then
		HOSTTAG="${HOSTTAG:=ip}"
		echo "HOSTTAG:          $HOSTTAG"
	fi

	if [ "$DUMP_MODE" == "fadump" ]; then
		if [ -e $sys_fadump_registered ] &&
			[ `cat $sys_fadump_registered` -eq 1 ] ; then
			echo "current state:    ready to fadump";
		else
			echo "current state:    Not ready to fadump";
		fi
		return 0
	fi

	if [ -e $sys_kexec_crash -a `cat $sys_kexec_crash` -eq 1 ] ; then
		echo "current state:    ready to kdump";
	else
		echo "current state:    Not ready to kdump";
	fi
	echo
	echo "kexec command:"
	echo -n "  "
	if [ -e $kexec_cmd_file ] ; then
		cat $kexec_cmd_file ;
	else
		echo "no kexec command recorded"
	fi
}

function kdump_test()
{
	echo "USE_KDUMP:         $USE_KDUMP"
	echo "KDUMP_SYSCTL:      $KDUMP_SYSCTL"
	echo "KDUMP_COREDIR:     $KDUMP_COREDIR"
	echo "crashkernel addr:  $IOMEM_ADDR"
	echo "kdump kernel addr: $KDUMP_ADDR"
	echo "kdump kernel:"
	if [ -h "$KDUMP_KERNEL" ];then
		echo "   "$(file $KDUMP_KERNEL)
	else
		echo "   "$KDUMP_KERNEL
	fi
	echo "kdump initrd: "
	if [ -h "$KDUMP_INITRD" ];then
		echo "   "$(file $KDUMP_INITRD)
	else
		echo "   "$KDUMP_INITRD
	fi
	echo "kexec command to be used:"
	echo "  $KEXEC_CMD"
}

# Check if symlinks are correctly set according to the 
# kernel version passed as argument, if $KDUMP_DIR
# is used to store smaller initrd.img files (Ubuntu only)
# Returns: 0/1 (success/broken,absent or wrong version)
#
function check_symlink()
{
symlink=$1
kern_version=$2

	if [ -h "$KDUMP_DIR/$symlink" ];then
		linkedfile=$(file "$KDUMP_DIR/$symlink" | rev | cut -d" " -f1 | rev)
		if [ -e "$linkedfile" ];then
			version=$(basename $linkedfile)
			if [ ${version%%-*} == "vmlinux" ];then
				version=${version#vmlinux-}
			else
				version=${version#$symlink-}
			fi
			if [ ${version} == $kern_version ]; then
				return 0
			fi
		fi
	fi
	return 1
}

# Create a symlink
function create_symlink()
{
link=$1
kernel_version=$2

	log_action_msg "Creating symlink $KDUMP_DIR/${link}"
	if [ $link == "vmlinuz" ];then
		ln -fs /boot/${link%?}?-${kernel_version} $KDUMP_DIR/$link
	else
		ln -fs $KDUMP_DIR/${link}-${kernel_version} $KDUMP_DIR/$link
	fi
}

# If $KDUMP_DIR is used to hold smaller initrd.img,
# verify if the proper symlinks are in place for
# initrd.img and vmlinuz/vmlinux.
# If no link is found, the links are broken or pointing
# to the wrong version, new links are created.
# Nothing is created if DRY_RUN = true. Only reporting
# is done.
# Returns: none. prints warnings or exit
# Creates: $KDUMP_DIR/vmlinuz $KDUMP_DIR/initrd.img
function manage_symlinks()
{
	if [ -d "$KDUMP_DIR" ];then
		for symlink in initrd.img vmlinuz;do
			check_symlink $symlink $KVER
			ret=$?
			if [ $ret == 1 ];then
				log_failure_msg "Invalid symlink : $KDUMP_DIR/$symlink"
				if [ ! $DRY_RUN ];then
					create_symlink $symlink $KVER
				fi
			fi
		done
	fi
	return 0
}

# check_fadump_support:  Other miscellaneous checks go here:
# 1: if USE_KDUMP is 0, don't set up fadump.
# 2: -e /sys/kernel/fadump_registered indicates that this kernel
#    thinks it supports fadump
#
# Returns: none. prints warnings or exit
function check_fadump_support()
{
	if [ -z "$USE_KDUMP" -o "$USE_KDUMP" == "0" ] ; then
		log_failure_msg "$KDUMP_DEFAULTS: USE_KDUMP is not set or zero"
		[ ! $DRY_RUN ] && exit 1;
	fi
	if [ ! -e $sys_fadump_registered ]; then
		log_failure_msg "fadump is not configured in this kernel."
		log_failure_msg "Try passing \"fadump=on\" to enable fadump"
		[ ! $DRY_RUN ] && exit 1;
	fi
        if [ -n "$NFS" ] && [ -n "$SSH" ];then
		log_failure_msg "\$SSH and \$NFS cannot be defined concurrently"
		[ ! $DRY_RUN ] && exit 1;
	fi
}

# check_kdump_support:  Other miscellaneous checks go here:
# 1: if USE_KDUMP is 0, don't set up kdump.
# 2: -e /sys/kernel/kexec_crash loaded indicates that this kernel
#    thinks it supports kdump
# 3: the current kernel should have booted with a crashkernel= command
#    line parameter.
#
# Returns: none. prints warnings or exit
function check_kdump_support()
{
	if [ -z "$USE_KDUMP" -o "$USE_KDUMP" == "0" ] ; then
		log_failure_msg "$KDUMP_DEFAULTS: USE_KDUMP is not set or zero"
		[ ! $DRY_RUN ] && exit 1;
	fi
	if [ ! -e $sys_kexec_crash ] ; then
		log_failure_msg "kdump is not supported by this kernel"
		[ ! $DRY_RUN ] && exit 1;
	fi
	CRASHKERNEL=`grep -i crashkernel= /proc/cmdline`;
	if [ -z "$CRASHKERNEL" ] ; then
		log_failure_msg "no crashkernel= parameter in the kernel cmdline"
		[ ! $DRY_RUN ] && exit 1;
	fi
        if [ -n "$NFS" ] && [ -n "$SSH" ];then
		log_failure_msg "\$SSH and \$NFS cannot be defined concurrently"
		[ ! $DRY_RUN ] && exit 1;
	fi
}

# check_relocatable: check if the given kernel config is relocatable
# Arguments:
#   1: the config file to check
# Returns: 0 if the given kernel config indicates a relocatable kernel.
#          1 otherwise.
function check_relocatable()
{
	if [ "$ARCH" = "ia64" ]; then
		# Linux is always relocatable on ia64
		return 0
	elif grep -q 'CONFIG_RELOCATABLE=y' $1; then
		return 0
	else
		return 1
	fi
}

function check_securelevel()
{
	local sl_path="/sys/kernel/security/securelevel"
	if [ ! -f "$sl_path" ]; then
		return 1
	fi

	if [ "$(cat "$sl_path")" = "1" ]; then
		return 0
	fi

	return 1
}


function check_secure_boot()
{
	local sb_path sm_file sb sm

	sb_path=$(find /sys/firmware/efi/efivars -name SecureBoot-* 2>/dev/null)
	sm_path=$(find /sys/firmware/efi/efivars -name SetupMode-* 2>/dev/null)

	if [ -f "$sb_path" ] && [ -f "$sm_path" ]; then
		sb=$(hexdump -v -e '/1 "%d\ "' $sb_path|cut -d' ' -f 5)
		sm=$(hexdump -v -e '/1 "%d\ "' $sm_path|cut -d' ' -f 5)

		if [ "$sb" = "1" ] && [ "$sm" = "0" ]; then
			return 0
		fi
	fi

	return 1
}

# Find the kexec/kdump kernel and possibly a corresponding initrd.
# A kdump kernel does not need to match the `uname -r` of the booted kernel.
#
# Use the following priorites in determining the kdump kernel:
#	 1. An explicit Kdump kernel in the defaults file overrides all
#    2. Use the current running kernel if it is relocatable.
#	 3. Give up.  Note, a kdump kernel is required.
#
# Returns: 0/1 (success/fail)
# Returns: none. prints warnings or exit
# Sets:    KDUMP_KERNEL, KDUMP_INITRD
function locate_kdump_kernel()
{
	# 1:  User may have specified the KDUMP_KERNEL and KDUMP_INITRD 
	#     explicitly.   Test for existance and either use it or fail.
	if [ -n "$KDUMP_KERNEL" ] ; then
		if [ ! -e "$KDUMP_KERNEL" ] ; then
			log_failure_msg "$KDUMP_DEFAULTS: KDUMP_KERNEL does not exist: $KDUMP_KERNEL"
			[ ! $DRY_RUN ] && exit 1;
		elif [ -n "$KDUMP_INITRD" -a ! -e "$KDUMP_INITRD" ] ; then
			log_failure_msg "$KDUMP_DEFAULTS: KDUMP_INITRD does not exist: $KDUMP_INITRD"
			[ ! $DRY_RUN ] && exit 1;
		fi
		return 0;
	fi

	# 2: The currently running kernel may be relocatable.  If so, then
	#    use the currently running kernel as the crash kernel.
	if check_relocatable /boot/config-$KVER; then
		if [ -f /boot/vmlinuz-$KVER ]; then
			KDUMP_KERNEL=/boot/vmlinuz-$KVER
		elif [ -f /boot/vmlinux-$KVER ]; then
			KDUMP_KERNEL=/boot/vmlinux-$KVER
		else
			KDUMP_KERNEL=
		fi
		if [ -f /boot/initrd.img-$KVER ]; then
			KDUMP_INITRD=/boot/initrd.img-$KVER
		else
			KDUMP_INITRD=
		fi
		KDUMP_ADDR="relocatable"
		return 0;
	fi

	# If the kdump kernel is not relocatable, we need to make sure it was
	# built to start at the crashkernel= address.  IOMEM_ADDR is already
	# set...
	if [ -z "$KDUMP_CONFIG" ] ; then return 0 ; fi

	if check_relocatable $KDUMP_CONFIG; then
		KDUMP_ADDR="relocatable"
	else
		KDUMP_ADDR=`grep CONFIG_PHYSICAL_START $KDUMP_CONFIG | sed "s/CONFIG_PHYSICAL_START=//"`
		# compare the two
		if [ "$KDUMP_ADDR" != "$IOMEM_ADDR" ] ; then
			log_failure_msg "kdump kernel relocation address does not match crashkernel parameter"
	        [ ! $DRY_RUN ] && exit 1;
			return 1;
		fi
	fi

	return 0;
}

# Register firmware-assisted dump as the dump mechanism
# Returns: none. prints warnings or exit
function fadump_register()
{
	# set fadump registered sys node to `1` to register fadump
	if [ "`cat $sys_fadump_registered`" -ne 1 ]; then
		echo 1 > $sys_fadump_registered
	fi
	rc=`cat $sys_fadump_registered`
	if [ $rc -ne 1 ] ; then
		log_failure_msg "fadump registering failed"
		logger -t $NAME "fadump registering failed"
		[ ! $DRY_RUN ] && exit 1;
	fi

	log_success_msg "fadump registered successfully"
	logger -t $NAME "fadump registered successfully"

	# Last step: make sure panic_on_oops is enabled
        PANIC_ON_OOPS=`/sbin/sysctl kernel.panic_on_oops | cut -d" " -f3`
        if [ $PANIC_ON_OOPS != "1" ] ; then
                sysctl -w kernel.panic_on_oops=1 >/dev/null
        fi
}

# Returns: none. prints warnings or exit
function fadump_unregister()
{
	# set fadump registered sys node to `0` to un-register fadump
	if [ "`cat $sys_fadump_registered`" -ne 0 ]; then
		echo 0 > $sys_fadump_registered
	fi
	rc=`cat $sys_fadump_registered`
	if [ $rc -ne 0 ] ; then
		log_failure_msg "fadump un-registering failed"
		logger -t $NAME "fadump un-registering failed"
		[ ! $DRY_RUN ] && exit 1;
	fi

	log_success_msg "fadump un-registered successfully"
	logger -t $NAME "fadump un-registered successfully"
}

function kdump_create_symlinks()
{
kernel_version=$1

	if [ -e $sys_kexec_crash -a `cat $sys_kexec_crash` -eq 1 ] ; then
		log_failure_msg "Cannot change symbolic links when kdump is loaded"
		exit 1
	fi

	if [ -e /boot/vmlinu[xz]-${kernel_version} ];then
		create_symlink vmlinuz $kernel_version

		if [ -f $KDUMP_DIR/initrd.img-${kernel_version} ]; then
			create_symlink initrd.img ${kernel_version}
		else
			if [ -x $KDUMP_KERNEL_HOOK ];then
				$KDUMP_KERNEL_HOOK $kernel_version
				create_symlink initrd.img $kernel_version
			else
				log_failure_msg "Unable to locate kernel hook"
			fi
		fi
	else
		log_failure_msg "Invalid kernel version : $kernel_version"
	fi
}
#
# Load the already determined kdump kernel and kdump initrd using kexec
# 	1: A KDUMP_CMDLINE in the defaults file overrides all.
#	2: Use /proc/cmdline
#			a. strip out the crashkernel= parameter.
#			b. strip out the abm= parameter.
#			c. append KDUMP_CMDLINE_APPEND from defaults file
# Sets:    KEXEC_CMD
# Returns: none. prints warnings or exit
function kdump_load()
{
	# assemble the kexec command used to load the kdump kernel
	KEXEC_CMD="$KEXEC -p"

	if check_secure_boot || check_securelevel; then
		KEXEC_CMD="$KEXEC_CMD -s"
	fi

	# Different kernel types allow/require different options:
	# The only special case here is that x86, x86_64 elf style
	# binaries require the --args-linux argument.
	if [ "$ARCH" != "ia64" ] ; then
		ELF_TST=`file $KDUMP_KERNEL | grep ELF`
		if [ -n "$ELF_TST" ] ; then
			KEXEC_CMD="$KEXEC_CMD --args-linux"
		fi
	fi
		
	# KDUMP_KEXEC_ARGS, if non-empty, comes from the defaults file.
	if [ -n "$KDUMP_KEXEC_ARGS" ] ; then
		KEXEC_CMD="$KEXEC_CMD $KDUMP_KEXEC_ARGS"
	fi

	# Assemble the --commmand-line:
	if [ -z "$KDUMP_CMDLINE" ] ; then
		KDUMP_CMDLINE=`cat /proc/cmdline | \
		sed -r -e 's/(^| )crashkernel=[^ ]*//g' \
		       -e 's/(^| )hugepages=[^ ]*//g' \
		       -e 's/(^| )hugepagesz=[^ ]*//g' \
		       -e 's/(^| )abm=[^ ]*//g' \
		       -e 's/"/\\\\"/'g`
	fi
	KDUMP_CMDLINE="$KDUMP_CMDLINE $KDUMP_CMDLINE_APPEND"
	KEXEC_CMD="$KEXEC_CMD --command-line=\"$KDUMP_CMDLINE\""

	# Assemble the --initrd:
	if [ -e "$KDUMP_INITRD" ] ; then
		KEXEC_CMD="$KEXEC_CMD --initrd=$KDUMP_INITRD"
	fi

	# Finally, add the kernel:
	KEXEC_CMD="$KEXEC_CMD $KDUMP_KERNEL"

	if [ $DRY_RUN ] ; then return 0; fi

	eval $KEXEC_CMD

	if [ $? == 0 ]; then
		log_success_msg "loaded kdump kernel"
		logger -t $NAME "$KEXEC_CMD"
		logger -t $NAME "loaded kdump kernel"
		echo "$KEXEC_CMD" >$kexec_cmd_file
	else
		log_failure_msg "failed to load kdump kernel"
		logger -t $NAME "failed to load kdump kernel"
		[ ! $DRY_RUN ] && exit 1;
	fi

	# Last step: make sure panic_on_oops is enabled
        PANIC_ON_OOPS=`/sbin/sysctl kernel.panic_on_oops | cut -d" " -f3`
        if [ $PANIC_ON_OOPS != "1" ] ; then
                sysctl -w kernel.panic_on_oops=1 >/dev/null
        fi

}

# Returns: none. prints warnings or exit
function kdump_unload()
{
	if check_secure_boot || check_securelevel; then
		$KEXEC -s -p -u
	else
		$KEXEC -p -u
	fi

	if [ $? == 0 ]; then
		log_success_msg "unloaded kdump kernel"
		logger -t $NAME "unloaded kdump kernel"
	else
		log_failure_msg "failed to unload kdump kernel"
		logger -t $NAME "failed to unload kdump kernel"
		[ ! $DRY_RUN ] && exit 1;
	fi
}

#
# Return the name of the subdirectory to store core file.
#	Will add hostname/IP according to the value of
#	HOSTTAG if networked dump is selected

function define_stampdir()
{
	STAMP=$1
	HOSTTAG="${HOSTTAG:=ip}"

	if [ -z "$SSH" ] && [ -z "$NFS" ]; then
		echo "$KDUMP_COREDIR/$STAMP"
	elif [ "$HOSTTAG" = "hostname" ];then
		echo "$KDUMP_COREDIR/$(hostname)-$STAMP"
	else
		# Looping to give time to network to settle
		typeset -i counter=0
		while (( counter < 5));do
			THIS_HOST="$(hostname -I)"
			set -- $THIS_HOST
			THIS_HOST=$1
			if [ -z "$THIS_HOST" ]; then
				sleep 1
				((counter+=1))
			else
				break
			fi
		done
		if [ -z "$THIS_HOST" ]; then
			# Send log msg to stderr to avoid polluting
			# the result of the function
			log_failure_msg "Unable to get IP from network" >&2
			log_action_msg "Reverting to HOSTTAG=hostname" >&2
			THIS_HOST="$(hostname)"
		fi
		echo "$KDUMP_COREDIR/$THIS_HOST-$STAMP"
	fi
}


# Saving the vmcore:
#	Our priorities are:
#	  1. If the makedumpfile config link is valid, use that
#	  2. else if the vmlinux link is valid, use that
#	  3. else fallback to using:  makedumpfile -d 1 -c
#	  4. else use cp
#
# Returns: 0/1 (success/fail)
# Sets: KDUMP_STAMPDIR, KDUMP_COREFILE
function kdump_save_core()
{
	KDUMP_STAMP=`date +"%Y%m%d%H%M"`
	KDUMP_STAMPDIR=$(define_stampdir $KDUMP_STAMP)
	KDUMP_CORETEMP="$KDUMP_STAMPDIR/dump-incomplete"
	KDUMP_COREFILE="$KDUMP_STAMPDIR/dump.$KDUMP_STAMP"
	KDUMP_DMESGFILE="$KDUMP_STAMPDIR/dmesg.$KDUMP_STAMP"

	# If we use NFS, verify that we can mount the FS
	#
	if [ -n "$NFS" ];then
		log_action_msg "Mounting NFS mountpoint $NFS ..."
		mount -t nfs -o nolock -o tcp -o soft -o timeo=${NFS_TIMEO} -o retrans=${NFS_RETRANS} $NFS $KDUMP_COREDIR
		ERROR=$?
		if [ $ERROR -ne 0 ];then
			log_failure_msg "$NAME: Unable to mount remote NFS directory $NFS. Cannot save core"
			logger -t $NAME "Unable to mount remote NFS directory $NFS. Cannot save core"
			return 1;
		fi

		# FS is mounted, see if we can write to it
		#
		mkdir -p $KDUMP_STAMPDIR
		ERROR=$?

		if [ $ERROR -ne 0 ];then
			log_failure_msg "$NAME: Unable to write to the remote NFS directory $NFS. Cannot save core"
			logger -t $NAME "Unable to write to the remote NFS directory $NFS. Cannot save core"
			umount $KDUMP_COREDIR
			UMNT_ERROR=$?
			if [ $UMNT_ERROR -ne 0 ];then
				log_failure_msg "$NAME: Unable to cleanly unmount the NFS file system"
				logger -t $NAME "Unable to cleanly unmount the NFS file system"
			fi
		else
			log_action_msg "Dumping to NFS mountpoint $NFS/$KDUMP_STAMP"
			logger -t $NAME "Dumping to NFS mountpoint $NFS/$KDUMP_STAMP"
		fi
	else
		mkdir -p $KDUMP_STAMPDIR
	fi

	log_action_msg "running makedumpfile $MAKEDUMP_ARGS $vmcore_file $KDUMP_CORETEMP"
	makedumpfile $MAKEDUMP_ARGS $vmcore_file $KDUMP_CORETEMP
	ERROR=$?
	if [ $ERROR -ne 0 ] ; then
		log_failure_msg "$NAME: makedumpfile failed, falling back to 'cp'"
		logger -t $NAME "makedumpfile failed, falling back to 'cp'"
		KDUMP_CORETEMP="$KDUMP_STAMPDIR/vmcore-incomplete"
		KDUMP_COREFILE="$KDUMP_STAMPDIR/vmcore.$KDUMP_STAMP"
		cp $vmcore_file $KDUMP_CORETEMP
		ERROR=$?
	fi

	# did we succeed?
	if [ $ERROR == 0 ]; then
		mv $KDUMP_CORETEMP $KDUMP_COREFILE
		log_success_msg "$NAME: saved vmcore in $KDUMP_STAMPDIR"
		logger -t $NAME "saved vmcore in $KDUMP_STAMPDIR"
		sync
	else
		log_failure_msg "$NAME: failed to save vmcore in $KDUMP_STAMPDIR"
		logger -t $NAME "failed to save vmcore in $KDUMP_STAMPDIR"
	fi

	# dump the dmesg buffer
	if [ "$KDUMP_DUMP_DMESG" -eq 1 ] ; then
            log_action_msg "running makedumpfile --dump-dmesg $vmcore_file $KDUMP_DMESGFILE"
            makedumpfile --dump-dmesg $vmcore_file $KDUMP_DMESGFILE
            ERROR=$?
            if [ $ERROR -ne 0 ] ; then
                log_failure_msg "$NAME: makedumpfile --dump-dmesg failed. dmesg content will be unavailable"
                logger -t $NAME "makedumpfile --dump-dmesg failed. dmesg content will be unavailable"
            fi

	    # did we succeed?
	    if [ $ERROR == 0 ]; then
		log_success_msg "$NAME: saved dmesg content in $KDUMP_STAMPDIR"
		logger -t $NAME "saved dmesg content in $KDUMP_STAMPDIR"
		sync
	    else
		log_failure_msg "$NAME: failed to save dmesg content in $KDUMP_STAMPDIR"
		logger -t $NAME "failed to save dmesg content in $KDUMP_STAMPDIR"
	    fi
	fi

	# limit the number of dumps kept on the local machine
	if [ -z "${NFS}" -a $ERROR == 0 -a $KDUMP_NUM_DUMPS -gt 0 ] ; then
		num_dumps=$(ls -1dv $KDUMP_COREDIR/2* | wc -l)
		if [ $num_dumps -gt $KDUMP_NUM_DUMPS ] ; then
			purge_num=$((num_dumps - KDUMP_NUM_DUMPS))
			purge_dir=$(ls -1dv $KDUMP_COREDIR/2* | head -$purge_num | tr "\n" " ")
			log_action_msg "Too many dumps, purging: $purge_dir"
			logger -t $NAME "Too many dumps, purging: $purge_dir"
			rm -rf $purge_dir
		fi
	fi

	# If we use NFS, umount the remote FS
	#
	if [ -n "$NFS" ];then
		umount $KDUMP_COREDIR
		UMNT_ERROR=$?
		if [ $UMNT_ERROR -ne 0 ] ; then
			log_failure_msg "$NAME: Unable to cleanly unmount the NFS file system"
			logger -t $NAME "Unable to cleanly unmount the NFS file system"
		fi
	fi

	return $ERROR
}

function kdump_save_core_to_ssh()
{
	KDUMP_SSH_KEY="${SSH_KEY:=/root/.ssh/kdump_id_rsa}"
	KDUMP_REMOTE_HOST="$SSH"

	KDUMP_STAMP=`date +"%Y%m%d%H%M"`
	KDUMP_STAMPDIR=$(define_stampdir $KDUMP_STAMP)

	KDUMP_CORETEMP="$KDUMP_STAMPDIR/dump-incomplete"
	KDUMP_COREFILE="$KDUMP_STAMPDIR/dump.$KDUMP_STAMP"
	KDUMP_TMPDMESG="/tmp/dmesg.$KDUMP_STAMP"
	KDUMP_DMESGFILE="$KDUMP_STAMPDIR/dmesg.$KDUMP_STAMP"
	ERROR=0

	ssh -i $KDUMP_SSH_KEY $KDUMP_REMOTE_HOST mkdir -p $KDUMP_STAMPDIR
	ERROR=$?
	# If remote connections fails, no need to continue
	if [ $ERROR -ne 0 ] ; then
		log_failure_msg "$NAME: Unable to reach remote server $KDUMP_REMOTE_HOST. No reason to continue"
		logger -t $NAME "Unable to reach remote server $KDUMP_REMOTE_HOST. No reason to continue"
		return 1
	fi

	# Add '-F' [flatten] to MAKEDUMP_ARGS, if not there:
	[ "${MAKEDUMP_ARGS#-F*}" != "${MAKEDUMP_ARGS}" ] || MAKEDUMP_ARGS="${MAKEDUMP_ARGS} -F"
	log_action_msg "sending makedumpfile $MAKEDUMP_ARGS $vmcore_file to $KDUMP_REMOTE_HOST : $KDUMP_CORETEMP"
	makedumpfile $MAKEDUMP_ARGS $vmcore_file | ssh -i $KDUMP_SSH_KEY $KDUMP_REMOTE_HOST dd of=$KDUMP_CORETEMP
	ERROR=$?
	if [ $ERROR -ne 0 ] ; then
		log_failure_msg "$NAME: makedumpfile failed, falling back to 'scp'"
		logger -t $NAME "makedumpfile failed, falling back to 'scp'"
		KDUMP_CORETEMP="$KDUMP_STAMPDIR/vmcore-incomplete"
		KDUMP_COREFILE="$KDUMP_STAMPDIR/vmcore.$KDUMP_STAMP"
		scp -i $KDUMP_SSH_KEY $vmcore_file $KDUMP_REMOTE_HOST:$KDUMP_CORETEMP
		if [ $? -ne 0 ];then
			log_failure_msg "$NAME: makedumpfile scp failed. The vmcore file will  not be available"
			logger -t $NAME "makedumpfile scp failed. The vmcore file will  not be available"
		else
			ERROR=0
		fi
	else
		ERROR=0
	fi

	# did we succeed?
	if [ $ERROR -ne 0 ]; then
		log_failure_msg "$NAME: failed to save vmcore in $KDUMP_REMOTE_HOST:$KDUMP_STAMPDIR"
		logger -t $NAME "failed to save vmcore in $KDUMP_REMOTE_HOST:$KDUMP_STAMPDIR"
		sync
	else
		ssh -i $KDUMP_SSH_KEY $KDUMP_REMOTE_HOST mv $KDUMP_CORETEMP $KDUMP_COREFILE
		log_success_msg "$NAME: saved vmcore in $KDUMP_REMOTE_HOST:$KDUMP_STAMPDIR"
		logger -t $NAME "saved vmcore in $KDUMP_REMOTE_HOST:$KDUMP_STAMPDIR"
	fi

	# dump the dmesg buffer
        if [ "$KDUMP_DUMP_DMESG" -eq 1 ] ; then
	    log_action_msg "running makedumpfile --dump-dmesg $vmcore_file $KDUMP_TMPDMESG"
	    makedumpfile --dump-dmesg $vmcore_file $KDUMP_TMPDMESG
	    ERROR=$?
	    if [ $ERROR -ne 0 ] ; then
		    log_failure_msg "$NAME: makedumpfile --dump-dmesg failed. dmesg content will be unavailable"
		    logger -t $NAME "makedumpfile --dump-dmesg failed. dmesg content will be unavailable"
	    else
		    scp -i $KDUMP_SSH_KEY $KDUMP_TMPDMESG $KDUMP_REMOTE_HOST:$KDUMP_DMESGFILE
		    ERROR=$?
	    fi

	    # did we succeed?
	    if [ $ERROR == 0 ]; then
		    log_success_msg "$NAME: saved dmesg content in $KDUMP_REMOTE_HOST:$KDUMP_STAMPDIR"
		    logger -t $NAME "saved dmesg content in $KDUMP_REMOTE_HOST:$KDUMP_STAMPDIR"
		    return 0;
	    else
		    log_failure_msg "$NAME: failed to save dmesg content in $KDUMP_REMOTE_HOST:$KDUMP_STAMPDIR"
		    logger -t $NAME "failed to save dmesg content in $KDUMP_REMOTE_HOST:$KDUMP_STAMPDIR"
		    return 1;
	    fi
	fi
}

function kdump_propagate()
{
	KDUMP_SSH_KEY="${SSH_KEY:=/root/.ssh/kdump_id_rsa}"
	KDUMP_REMOTE_HOST="$SSH"

	# ssh key propagation is only needed
	# if remote ssh dump is configured
	if [ -z "$KDUMP_REMOTE_HOST" ];then
		log_failure_msg "$NAME: Remote ssh dump is not configured. No reason to propagate"
		logger -t $NAME "Remote ssh dump is not configured. No reason to propagate"
		return 1;
	fi

	# Verify if the provided key exists and create it if needed
	if [ -f "$KDUMP_SSH_KEY" ];then
		echo "Using existing key $KDUMP_SSH_KEY"
	else
		echo "Need to generate a new ssh key..."
		/usr/bin/ssh-keygen -t rsa -f $KDUMP_SSH_KEY -N "" 2>&1 > /dev/null
	fi

	KDUMP_SSH_USER=${KDUMP_REMOTE_HOST%@*}
	KDUMP_SSH_TARGET=${KDUMP_REMOTE_HOST#*@}

	ssh-copy-id -i $KDUMP_SSH_KEY $KDUMP_SSH_USER@$KDUMP_SSH_TARGET &>/dev/null
	ERROR=$?

	if [ $ERROR -ne 0 ];then
		log_failure_msg "$NAME: $KDUMP_SSH_KEY failed to be sent to $KDUMP_REMOTE_HOST"
		logger -t $NAME "$KDUMP_SSH_KEY failed to be sent to $KDUMP_REMOTE_HOST"
		return 1;
	else
		logger -t $NAME "propagated ssh key $KDUMP_SSH_KEY to server $KDUMP_REMOTE_HOST"
		echo "propagated ssh key $KDUMP_SSH_KEY to server $KDUMP_REMOTE_HOST"
		return 0;
	fi

}



case "$1" in
  test)
	DRY_RUN="true"
	if [ "$DUMP_MODE" == "fadump" ]; then
		check_fadump_support
	else
		check_kdump_support;
		manage_symlinks;
		locate_kdump_kernel;
		kdump_load;
		kdump_test
	fi
	;;
  show)
	DRY_RUN="true"
	if [ "$DUMP_MODE" == "fadump" ]; then
		check_fadump_support;
	else
		check_kdump_support;
	fi
	kdump_show
	;;
  load)
	if [ "$DUMP_MODE" == "fadump" ]; then
		check_fadump_support;
		fadump_register
	else
		check_kdump_support;
		manage_symlinks;
		locate_kdump_kernel;
		kdump_load
	fi
	;;
  unload)
	if [ "$DUMP_MODE" == "fadump" ]; then
		fadump_unregister
	else
		kdump_unload
	fi
	;;
  status)
	if [ "$DUMP_MODE" == "fadump" ]; then
		check_fadump_support
		if [ `cat $sys_fadump_registered` -eq 1 ] ; then
			echo "current state   : ready to fadump";
		else
			echo "current state   : Not ready to fadump";
		fi
	else
		DRY_RUN=true
		check_kdump_support;
		manage_symlinks;
		if [ `cat $sys_kexec_crash` -eq 1 ] ; then
			echo "current state   : ready to kdump";
		else
			echo "current state   : Not ready to kdump";
		fi
	fi
	exit 0;
	;;
  savecore)
	if ! [ -z $SSH ];then
		kdump_save_core_to_ssh
	else
		kdump_save_core
	fi
	exit $?
	;;
  propagate)
	kdump_propagate;
	;;
  symlinks)
	if [ -z $2 ];then
		log_failure_msg "Invalid argument : missing kernel version"
	else
		kdump_create_symlinks $2
	fi
	;;
  help|-h*|--h*)
	kdump_help
	;;
  *)
	echo "Usage: $0 {help|test|show|status|load|unload|savecore|propagate|symlinks kernel-version}"
	exit 1
	;;
esac

exit 0