libphone-ui-common 1:0.0.1+git20110825-4 / etc / libphoneui.conf

# The following sections are "view" specific settings
# every view must have a "module" field that specifies the name of the
# module that should be used for that view, and additional view specific
# settings if supported by that view.
[dialer]
module = shr

[messages]
module = shr
request_message_receipt = 0

[contacts]
module = shr

[calls]
module = shr

[phonelog]
module = shr

[notification]
module = shr

[idle_screen]
module = shr

[settings]
module = shr

#Alsa configuration for the sound utility functions
# The general alsa section
[alsa]
hardware_control_name = hw:0

#Each section describs a sound state
#each section can accept the following fields:
#speaker: the name of the corrosponding alsa control
#microphone: the name of the corrosponding alsa control
#speaker_min: the wanted lower bound to allow setting this control to
#speaker_max: the wanted upper bound to allow setting this control to
#microphone_min: the wanted lower bound to allow setting this control to
#microphone_max: the wanted upper bound to allow setting this control to

[alsa_control_idle]
#speaker = PCM Volume

[alsa_control_speaker]
speaker = Headphone Playback Volume
microphone = Mono Playback Volume
microphone_mute = Mono Mixer Sidetone Playback Switch

[alsa_control_handset]
speaker = Speaker Playback Volume
speaker_min = 90
microphone = Mono Playback Volume
microphone_mute = Mono Mixer Sidetone Playback Switch

[alsa_control_headset]
speaker = Headphone Playback Volume
microphone = Mono Playback Volume
microphone_mute = Mono Mixer Sidetone Playback Switch

[alsa_control_bluetooth]
speaker = Speaker Playback Volume
microphone = Mono Playback Volume

[device]
# sysfs node for the vibrator to use
vibrator = /sys/class/leds/gta02\::vibrator/brightness
# sysfs node to set the backlight brightness
backlight = /sys/class/backlight/pcf50633-backlight


#[feedback_error]

#[feedback_warning]

#[feedback_notice]

#[feedback_click]