/usr/share/avra/tn13def.inc is in avra 1.3.0-3.
This file is owned by root:root, with mode 0o644.
The actual contents of the file can be viewed below.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 | ;***** THIS IS A MACHINE GENERATED FILE - DO NOT EDIT ********************
;***** Created: 2005-01-11 10:31 ******* Source: ATtiny13.xml ************
;*************************************************************************
;* A P P L I C A T I O N N O T E F O R T H E A V R F A M I L Y
;*
;* Number : AVR000
;* File Name : "tn13def.inc"
;* Title : Register/Bit Definitions for the ATtiny13
;* Date : 2005-01-11
;* Version : 2.14
;* Support E-mail : avr@atmel.com
;* Target MCU : ATtiny13
;*
;* DESCRIPTION
;* When including this file in the assembly program file, all I/O register
;* names and I/O register bit names appearing in the data book can be used.
;* In addition, the six registers forming the three data pointers X, Y and
;* Z have been assigned names XL - ZH. Highest RAM address for Internal
;* SRAM is also defined
;*
;* The Register names are represented by their hexadecimal address.
;*
;* The Register Bit names are represented by their bit number (0-7).
;*
;* Please observe the difference in using the bit names with instructions
;* such as "sbr"/"cbr" (set/clear bit in register) and "sbrs"/"sbrc"
;* (skip if bit in register set/cleared). The following example illustrates
;* this:
;*
;* in r16,PORTB ;read PORTB latch
;* sbr r16,(1<<PB6)+(1<<PB5) ;set PB6 and PB5 (use masks, not bit#)
;* out PORTB,r16 ;output to PORTB
;*
;* in r16,TIFR ;read the Timer Interrupt Flag Register
;* sbrc r16,TOV0 ;test the overflow flag (use bit#)
;* rjmp TOV0_is_set ;jump if set
;* ... ;otherwise do something else
;*************************************************************************
#ifndef _TN13DEF_INC_
#define _TN13DEF_INC_
#pragma partinc 0
; ***** SPECIFY DEVICE ***************************************************
.device ATtiny13
#pragma AVRPART ADMIN PART_NAME ATtiny13
.equ SIGNATURE_000 = 0x1e
.equ SIGNATURE_001 = 0x90
.equ SIGNATURE_002 = 0x07
#pragma AVRPART CORE CORE_VERSION V2
#pragma AVRPART CORE NEW_INSTRUCTIONS lpm rd,z+
; ***** I/O REGISTER DEFINITIONS *****************************************
; NOTE:
; Definitions marked "MEMORY MAPPED"are extended I/O ports
; and cannot be used with IN/OUT instructions
.equ SREG = 0x3f
.equ SPL = 0x3d
.equ GIMSK = 0x3b
.equ GIFR = 0x3a
.equ TIMSK0 = 0x39
.equ TIFR0 = 0x38
.equ SPMCSR = 0x37
.equ OCR0A = 0x36
.equ MCUCR = 0x35
.equ MCUSR = 0x34
.equ TCCR0B = 0x33
.equ TCNT0 = 0x32
.equ OSCCAL = 0x31
.equ TCCR0A = 0x2f
.equ DWDR = 0x2e
.equ OCR0B = 0x29
.equ GTCCR = 0x28
.equ CLKPR = 0x26
.equ WDTCR = 0x21
.equ EEAR = 0x1e
.equ EEDR = 0x1d
.equ EECR = 0x1c
.equ PORTB = 0x18
.equ DDRB = 0x17
.equ PINB = 0x16
.equ PCMSK = 0x15
.equ DIDR0 = 0x14
.equ ACSR = 0x08
.equ ADMUX = 0x07
.equ ADCSRA = 0x06
.equ ADCH = 0x05
.equ ADCL = 0x04
.equ ADCSRB = 0x03
; ***** BIT DEFINITIONS **************************************************
; ***** AD_CONVERTER *****************
; ADMUX - The ADC multiplexer Selection Register
.equ MUX0 = 0 ; Analog Channel and Gain Selection Bits
.equ MUX1 = 1 ; Analog Channel and Gain Selection Bits
.equ ADLAR = 5 ; Left Adjust Result
.equ REFS0 = 6 ; Reference Selection Bit 0
; ADCSRA - The ADC Control and Status register
.equ ADPS0 = 0 ; ADC Prescaler Select Bits
.equ ADPS1 = 1 ; ADC Prescaler Select Bits
.equ ADPS2 = 2 ; ADC Prescaler Select Bits
.equ ADIE = 3 ; ADC Interrupt Enable
.equ ADIF = 4 ; ADC Interrupt Flag
.equ ADATE = 5 ; ADC Auto Trigger Enable
.equ ADSC = 6 ; ADC Start Conversion
.equ ADEN = 7 ; ADC Enable
; ADCH - ADC Data Register High Byte
.equ ADCH0 = 0 ; ADC Data Register High Byte Bit 0
.equ ADCH1 = 1 ; ADC Data Register High Byte Bit 1
.equ ADCH2 = 2 ; ADC Data Register High Byte Bit 2
.equ ADCH3 = 3 ; ADC Data Register High Byte Bit 3
.equ ADCH4 = 4 ; ADC Data Register High Byte Bit 4
.equ ADCH5 = 5 ; ADC Data Register High Byte Bit 5
.equ ADCH6 = 6 ; ADC Data Register High Byte Bit 6
.equ ADCH7 = 7 ; ADC Data Register High Byte Bit 7
; ADCL - ADC Data Register Low Byte
.equ ADCL0 = 0 ; ADC Data Register Low Byte Bit 0
.equ ADCL1 = 1 ; ADC Data Register Low Byte Bit 1
.equ ADCL2 = 2 ; ADC Data Register Low Byte Bit 2
.equ ADCL3 = 3 ; ADC Data Register Low Byte Bit 3
.equ ADCL4 = 4 ; ADC Data Register Low Byte Bit 4
.equ ADCL5 = 5 ; ADC Data Register Low Byte Bit 5
.equ ADCL6 = 6 ; ADC Data Register Low Byte Bit 6
.equ ADCL7 = 7 ; ADC Data Register Low Byte Bit 7
; ADCSRB - ADC Control and Status Register B
.equ ADTS0 = 0 ; ADC Auto Trigger Source 0
.equ ADTS1 = 1 ; ADC Auto Trigger Source 1
.equ ADTS2 = 2 ; ADC Auto Trigger Source 2
; DIDR0 - Digital Input Disable Register 0
.equ ADC1D = 2 ; ADC2 Digital input Disable
.equ ADC3D = 3 ; ADC3 Digital input Disable
.equ ADC2D = 4 ; ADC2 Digital input Disable
.equ ADC0D = 5 ; ADC0 Digital input Disable
; ***** ANALOG_COMPARATOR ************
; ADCSRB - ADC Control and Status Register B
.equ ACME = 6 ; Analog Comparator Multiplexer Enable
; ACSR - Analog Comparator Control And Status Register
.equ ACIS0 = 0 ; Analog Comparator Interrupt Mode Select bit 0
.equ ACIS1 = 1 ; Analog Comparator Interrupt Mode Select bit 1
.equ ACIE = 3 ; Analog Comparator Interrupt Enable
.equ ACI = 4 ; Analog Comparator Interrupt Flag
.equ ACO = 5 ; Analog Compare Output
.equ ACBG = 6 ; Analog Comparator Bandgap Select
.equ AINBG = ACBG ; For compatibility
.equ ACD = 7 ; Analog Comparator Disable
; DIDR0 -
.equ AIN0D = 0 ; AIN0 Digital Input Disable
.equ AIN1D = 1 ; AIN1 Digital Input Disable
; ***** EEPROM ***********************
; EEAR - EEPROM Read/Write Access
.equ EEARL = EEAR ; For compatibility
.equ EEAR0 = 0 ; EEPROM Read/Write Access bit 0
.equ EEAR1 = 1 ; EEPROM Read/Write Access bit 1
.equ EEAR2 = 2 ; EEPROM Read/Write Access bit 2
.equ EEAR3 = 3 ; EEPROM Read/Write Access bit 3
.equ EEAR4 = 4 ; EEPROM Read/Write Access bit 4
.equ EEAR5 = 5 ; EEPROM Read/Write Access bit 5
; EEDR - EEPROM Data Register
.equ EEDR0 = 0 ; EEPROM Data Register bit 0
.equ EEDR1 = 1 ; EEPROM Data Register bit 1
.equ EEDR2 = 2 ; EEPROM Data Register bit 2
.equ EEDR3 = 3 ; EEPROM Data Register bit 3
.equ EEDR4 = 4 ; EEPROM Data Register bit 4
.equ EEDR5 = 5 ; EEPROM Data Register bit 5
.equ EEDR6 = 6 ; EEPROM Data Register bit 6
.equ EEDR7 = 7 ; EEPROM Data Register bit 7
; EECR - EEPROM Control Register
.equ EERE = 0 ; EEPROM Read Enable
.equ EEWE = 1 ; EEPROM Write Enable
.equ EEPE = EEWE ; For compatibility
.equ EEMWE = 2 ; EEPROM Master Write Enable
.equ EEMPE = EEMWE ; For compatibility
.equ EERIE = 3 ; EEProm Ready Interrupt Enable
.equ EEPM0 = 4 ;
.equ EEPM1 = 5 ;
; ***** CPU **************************
; SREG - Status Register
.equ SREG_C = 0 ; Carry Flag
.equ SREG_Z = 1 ; Zero Flag
.equ SREG_N = 2 ; Negative Flag
.equ SREG_V = 3 ; Two's Complement Overflow Flag
.equ SREG_S = 4 ; Sign Bit
.equ SREG_H = 5 ; Half Carry Flag
.equ SREG_T = 6 ; Bit Copy Storage
.equ SREG_I = 7 ; Global Interrupt Enable
; SPL - Stack Pointer Low Byte
.equ SP0 = 0 ; Stack Pointer Bit 0
.equ SP1 = 1 ; Stack Pointer Bit 1
.equ SP2 = 2 ; Stack Pointer Bit 2
.equ SP3 = 3 ; Stack Pointer Bit 3
.equ SP4 = 4
.equ SP5 = 5 ; Stack Pointer Bit 5
.equ SP6 = 6 ; Stack Pointer Bit 6
.equ SP7 = 7 ; Stack Pointer Bit 7
; MCUCR - MCU Control Register
.equ ISC00 = 0 ; Interrupt Sense Control 0 bit 0
.equ ISC01 = 1 ; Interrupt Sense Control 0 bit 1
.equ SM0 = 3 ; Sleep Mode Select Bit 0
.equ SM1 = 4 ; Sleep Mode Select Bit 1
.equ SE = 5 ; Sleep Enable
.equ PUD = 6 ; Pull-up Disable
; MCUSR - MCU Status register
.equ PORF = 0 ; Power-On Reset Flag
.equ EXTRF = 1 ; External Reset Flag
.equ BORF = 2 ; Brown-out Reset Flag
.equ WDRF = 3 ; Watchdog Reset Flag
; OSCCAL - Oscillator Calibration Register
.equ CAL0 = 0 ; Oscillatro Calibration Value Bit 0
.equ CAL1 = 1 ; Oscillatro Calibration Value Bit 1
.equ CAL2 = 2 ; Oscillatro Calibration Value Bit 2
.equ CAL3 = 3 ; Oscillatro Calibration Value Bit 3
.equ CAL4 = 4 ; Oscillatro Calibration Value Bit 4
.equ CAL5 = 5 ; Oscillatro Calibration Value Bit 5
.equ CAL6 = 6 ; Oscillatro Calibration Value Bit 6
; CLKPR - Clock Prescale Register
.equ CLKPS0 = 0 ; Clock Prescaler Select Bit 0
.equ CLKPS1 = 1 ; Clock Prescaler Select Bit 1
.equ CLKPS2 = 2 ; Clock Prescaler Select Bit 2
.equ CLKPS3 = 3 ; Clock Prescaler Select Bit 3
.equ CLKPCE = 7 ; Clock Prescaler Change Enable
; DWDR - Debug Wire Data Register
.equ DWDR0 = 0 ; Debug Wire Data Register Bit 0
.equ DWDR1 = 1 ; Debug Wire Data Register Bit 1
.equ DWDR2 = 2 ; Debug Wire Data Register Bit 2
.equ DWDR3 = 3 ; Debug Wire Data Register Bit 3
.equ DWDR4 = 4 ; Debug Wire Data Register Bit 4
.equ DWDR5 = 5 ; Debug Wire Data Register Bit 5
.equ DWDR6 = 6 ; Debug Wire Data Register Bit 6
.equ DWDR7 = 7 ; Debug Wire Data Register Bit 7
; SPMCSR - Store Program Memory Control and Status Register
.equ SPMEN = 0 ; Store program Memory Enable
.equ PGERS = 1 ; Page Erase
.equ PGWRT = 2 ; Page Write
.equ RFLB = 3 ; Read Fuse and Lock Bits
.equ CTPB = 4 ; Clear Temporary Page Buffer
; ***** PORTB ************************
; PORTB - Data Register, Port B
.equ PORTB0 = 0 ;
.equ PB0 = 0 ; For compatibility
.equ PORTB1 = 1 ;
.equ PB1 = 1 ; For compatibility
.equ PORTB2 = 2 ;
.equ PB2 = 2 ; For compatibility
.equ PORTB3 = 3 ;
.equ PB3 = 3 ; For compatibility
.equ PORTB4 = 4 ;
.equ PB4 = 4 ; For compatibility
.equ PORTB5 = 5 ;
.equ PB5 = 5 ; For compatibility
; DDRB - Data Direction Register, Port B
.equ DDB0 = 0 ;
.equ DDB1 = 1 ;
.equ DDB2 = 2 ;
.equ DDB3 = 3 ;
.equ DDB4 = 4 ;
.equ DDB5 = 5 ;
; PINB - Input Pins, Port B
.equ PINB0 = 0 ;
.equ PINB1 = 1 ;
.equ PINB2 = 2 ;
.equ PINB3 = 3 ;
.equ PINB4 = 4 ;
.equ PINB5 = 5 ;
; ***** EXTERNAL_INTERRUPT ***********
; MCUCR - MCU Control Register
;.equ ISC00 = 0 ; Interrupt Sense Control 0 Bit 0
;.equ ISC01 = 1 ; Interrupt Sense Control 0 Bit 1
; GIMSK - General Interrupt Mask Register
.equ GICR = GIMSK ; For compatibility
.equ PCIE = 5 ; Pin Change Interrupt Enable
.equ INT0 = 6 ; External Interrupt Request 0 Enable
; GIFR - General Interrupt Flag register
.equ PCIF = 5 ; Pin Change Interrupt Flag
.equ INTF0 = 6 ; External Interrupt Flag 0
; PCMSK - Pin Change Enable Mask
.equ PCINT0 = 0 ; Pin Change Enable Mask Bit 0
.equ PCINT1 = 1 ; Pin Change Enable Mask Bit 1
.equ PCINT2 = 2 ; Pin Change Enable Mask Bit 2
.equ PCINT3 = 3 ; Pin Change Enable Mask Bit 3
.equ PCINT4 = 4 ; Pin Change Enable Mask Bit 4
.equ PCINT5 = 5 ; Pin Change Enable Mask Bit 5
; ***** TIMER_COUNTER_0 **************
; TIMSK0 - Timer/Counter0 Interrupt Mask Register
.equ TOIE0 = 1 ; Timer/Counter0 Overflow Interrupt Enable
.equ OCIE0A = 2 ; Timer/Counter0 Output Compare Match A Interrupt Enable
.equ OCIE0B = 3 ; Timer/Counter0 Output Compare Match B Interrupt Enable
; TIFR0 - Timer/Counter0 Interrupt Flag register
.equ TOV0 = 1 ; Timer/Counter0 Overflow Flag
.equ OCF0A = 2 ; Timer/Counter0 Output Compare Flag 0A
.equ OCF0B = 3 ; Timer/Counter0 Output Compare Flag 0B
; OCR0A - Timer/Counter0 Output Compare Register
.equ OCR0_0 = 0 ;
.equ OCR0_1 = 1 ;
.equ OCR0_2 = 2 ;
.equ OCR0_3 = 3 ;
.equ OCR0_4 = 4 ;
.equ OCR0_5 = 5 ;
.equ OCR0_6 = 6 ;
.equ OCR0_7 = 7 ;
; TCCR0A - Timer/Counter Control Register A
.equ WGM00 = 0 ; Waveform Generation Mode
.equ WGM01 = 1 ; Waveform Generation Mode
.equ COM0B0 = 4 ; Compare Match Output B Mode
.equ COM0B1 = 5 ; Compare Match Output B Mode
.equ COM0A0 = 6 ; Compare Match Output A Mode
.equ COM0A1 = 7 ; Compare Match Output A Mode
; TCNT0 - Timer/Counter0
.equ TCNT0_0 = 0 ;
.equ TCNT0_1 = 1 ;
.equ TCNT0_2 = 2 ;
.equ TCNT0_3 = 3 ;
.equ TCNT0_4 = 4 ;
.equ TCNT0_5 = 5 ;
.equ TCNT0_6 = 6 ;
.equ TCNT0_7 = 7 ;
; TCCR0B - Timer/Counter Control Register B
.equ CS00 = 0 ; Clock Select
.equ CS01 = 1 ; Clock Select
.equ CS02 = 2 ; Clock Select
.equ WGM02 = 3 ; Waveform Generation Mode
.equ FOC0B = 6 ; Force Output Compare B
.equ FOC0A = 7 ; Force Output Compare A
; OCR0B - Timer/Counter0 Output Compare Register
;.equ OCR0_0 = 0 ;
;.equ OCR0_1 = 1 ;
;.equ OCR0_2 = 2 ;
;.equ OCR0_3 = 3 ;
;.equ OCR0_4 = 4 ;
;.equ OCR0_5 = 5 ;
;.equ OCR0_6 = 6 ;
;.equ OCR0_7 = 7 ;
; GTCCR - General Timer Conuter Register
.equ PSR10 = 0 ; Prescaler Reset Timer/Counter0
.equ TSM = 7 ; Timer/Counter Synchronization Mode
; ***** WATCHDOG *********************
; WDTCR - Watchdog Timer Control Register
.equ WDP0 = 0 ; Watch Dog Timer Prescaler bit 0
.equ WDP1 = 1 ; Watch Dog Timer Prescaler bit 1
.equ WDP2 = 2 ; Watch Dog Timer Prescaler bit 2
.equ WDE = 3 ; Watch Dog Enable
.equ WDCE = 4 ; Watchdog Change Enable
.equ WDP3 = 5 ; Watchdog Timer Prescaler Bit 3
.equ WDTIE = 6 ; Watchdog Timeout Interrupt Enable
.equ WDTIF = 7 ; Watchdog Timeout Interrupt Flag
; ***** LOCKSBITS ********************************************************
.equ LB1 = 0 ; Lockbit
.equ LB2 = 1 ; Lockbit
; ***** FUSES ************************************************************
; LOW fuse bits
.equ CKSEL0 = 0 ; Select Clock Source
.equ CKSEL1 = 1 ; Select Clock Source
.equ SUT0 = 2 ; Select start-up time
.equ SUT1 = 3 ; Select start-up time
.equ CKDIV8 = 4 ; Start up with system clock divided by 8
.equ WDTON = 5 ; Watch dog timer always on
.equ EESAVE = 6 ; Keep EEprom contents during chip erase
.equ SPIEN = 7 ; SPI programming enable
; HIGH fuse bits
.equ RSTDISBL = 0 ; Disable external reset
.equ BODLEVEL0 = 1 ; Enable BOD and select level
.equ BODLEVEL1 = 2 ; Enable BOD and select level
.equ DWEN = 3 ; DebugWire Enable
.equ SELFPRGEN = 4 ; Self Programming Enable
; ***** CPU REGISTER DEFINITIONS *****************************************
.def XH = r27
.def XL = r26
.def YH = r29
.def YL = r28
.def ZH = r31
.def ZL = r30
; ***** DATA MEMORY DECLARATIONS *****************************************
.equ FLASHEND = 0x01ff ; Note: Word address
.equ IOEND = 0x003f
.equ SRAM_START = 0x0060
.equ SRAM_SIZE = 64
.equ RAMEND = 0x009f
.equ XRAMEND = 0x0000
.equ E2END = 0x003f
.equ EEPROMEND = 0x003f
.equ EEADRBITS = 6
#pragma AVRPART MEMORY PROG_FLASH 1024
#pragma AVRPART MEMORY EEPROM 64
#pragma AVRPART MEMORY INT_SRAM SIZE 64
#pragma AVRPART MEMORY INT_SRAM START_ADDR 0x60
; ***** BOOTLOADER DECLARATIONS ******************************************
.equ PAGESIZE = 16
; ***** INTERRUPT VECTORS ************************************************
.equ INT0addr = 0x0001 ; External Interrupt 0
.equ PCI0addr = 0x0002 ; External Interrupt Request 0
.equ OVF0addr = 0x0003 ; Timer/Counter0 Overflow
.equ ERDYaddr = 0x0004 ; EEPROM Ready
.equ ACIaddr = 0x0005 ; Analog Comparator
.equ OC0Aaddr = 0x0006 ; Timer/Counter Compare Match A
.equ OC0Baddr = 0x0007 ; Timer/Counter Compare Match B
.equ WDTaddr = 0x0008 ; Watchdog Time-out
.equ ADCCaddr = 0x0009 ; ADC Conversion Complete
.equ INT_VECTORS_SIZE = 10 ; size in words
#endif /* _TN13DEF_INC_ */
; ***** END OF FILE ******************************************************
|