grub-legacy 0.97-72 / usr / sbin / grub-install

#! /bin/sh

# Install GRUB on your drive.
#   Copyright (C) 1999,2000,2001,2002,2003,2004 Free Software Foundation, Inc.
#
# This file is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.

# Initialize some variables.
prefix=/usr
exec_prefix=${prefix}
sbindir=${exec_prefix}/sbin
libdir=${prefix}/lib
PACKAGE=grub
VERSION=0.97
host_cpu=x86_64
host_os=linux-gnu
host_vendor=pc
pkglibdir=${libdir}/${PACKAGE}/${host_cpu}-${host_vendor}

grub_shell=${sbindir}/grub
grub_set_default=${sbindir}/grub-set-default
log_file=/tmp/grub-install.log.$$
img_file=/tmp/grub-install.img.$$
rootdir=
grub_prefix=/boot/grub

install_device=
no_floppy=
force_lba=
recheck=no
debug=no

# look for secure tempfile creation wrappers on this platform
if test -x /bin/tempfile; then
    mklog="/bin/tempfile --prefix=grub"
    mkimg="/bin/tempfile --prefix=grub"
elif test -x /bin/mktemp; then
    mklog="/bin/mktemp /tmp/grub-install.log.XXXXXX"
    mkimg="/bin/mktemp /tmp/grub-install.img.XXXXXX"
else
    mklog=""
    mkimg=""
fi

# Usage: usage
# Print the usage.
usage () {
    cat <<EOF
Usage: grub-install [OPTION] install_device
Install GRUB on your drive.

  -h, --help              print this message and exit
  -v, --version           print the version information and exit
  --root-directory=DIR    install GRUB images under the directory DIR
                          instead of the root directory
  --grub-shell=FILE       use FILE as the grub shell
  --no-floppy             do not probe any floppy drive
  --force-lba             force GRUB to use LBA mode even for a buggy
                          BIOS
  --recheck               probe a device map even if it already exists

INSTALL_DEVICE can be a GRUB device name or a system device filename.

grub-install copies GRUB images into the DIR/boot directory specfied by
--root-directory, and uses the grub shell to install grub into the boot
sector.

Report bugs to <bug-grub@gnu.org>.
EOF
}

# Usage: getraid_mdadm mddevice
# Routine to find a physical device from an md device
# If found, the first grub BIOS device (from device.map) is returned 
# If no BIOS drives match the RAID devices, the first device returned
# from mdadm -D is returned
getraid_mdadm() {
	device=$1
	mdadm=$(mdadm -D "$device") || {
		echo "$PROG: mdadm -D $device failed" >&2
		exit 1
	}
	eval "$(
		echo "$mdadm" | awk '
			$1 == "Number" && $2 == "Major" { start = 1; next }
			$1 == "UUID" { print "uuid=" $3; start = 0; next }
			!start { next }
			$2 == 0 && $3 == 0 { next }
			{ devices = devices "\n" $NF }
			END { print "devices='\''" devices "'\''" }
		'
	)"

	# Convert RAID devices list into a list of disks
	tmp_disks=`echo "$devices" | sed -e 's%\(\(s\|h\|xv\)d[a-z]\)[0-9]*$%\1%' \
					 -e 's%\(d[0-9]*\)p[0-9]*$%\1%' \
					 -e 's%\(fd[0-9]*\)$%\1%' \
					 -e 's%/part[0-9]*$%/disc%' \
					 -e 's%\(c[0-7]d[0-9]*\).*$%\1%' \
					 -e '/^$/d' |
				     sed -n '1h;2,$H;${g;s/\n/|/g;p}'`

	# Find first BIOS disk that's a member of the RAID array
	# Default to first RAID member if no tmp_disks are BIOS devices
	set -- `egrep $tmp_disks $device_map | \
		sort | \
		sed -n 1p `
	device=${2:-${tmp_disks%%|*}}

	# Return first partition on BIOS disk that's part of the RAID
	echo "$devices" | \
		sed -n "\:${device}:p" | \
		sed -n 1p
}

# Usage: convert os_device
# Convert an OS device to the corresponding GRUB drive.
# This part is OS-specific.
convert () {
    # First, check if the device file exists.
    if test -e "$1"; then
	:
    else
	echo "$1: Not found or not a block device." 1>&2
	exit 1
    fi

	# Find an actual physical device if we're passed a RAID device
	case $1 in
		/dev/md* | /dev/md/*)  set -- `getraid_mdadm $1`
	esac

	GRUB_LEGACY_0_BASED_PARTITIONS=1 grub-probe --device-map=${device_map} -t drive -d "$1"
}

# Usage: resolve_symlink file
# Find the real file/device that file points at
resolve_symlink () {
	tmp_fname=$1
	# Resolve symlinks
	while test -L $tmp_fname; do
		tmp_new_fname=`ls -al $tmp_fname | sed -n 's%.*-> \(.*\)%\1%p'`
		if test -z "$tmp_new_fname"; then
			echo "Unrecognized ls output" 2>&1
			exit 1
		fi

		# Convert relative symlinks
		case $tmp_new_fname in
			/*) tmp_fname="$tmp_new_fname"
			;;
			*) tmp_fname="`echo $tmp_fname | sed 's%/[^/]*$%%'`/$tmp_new_fname"
			;;
		esac
	done
	echo "$tmp_fname"
}

# Usage: find_device file
# Find block device on which the file resides.
find_device () {
    tmp_fname=`grub-probe --device-map=${device_map} -t device $1/`

    if test -z "$tmp_fname"; then
	echo "Could not find device for $1" 2>&1
	exit 1
    fi

	tmp_fname=`resolve_symlink $tmp_fname`

    echo "$tmp_fname"
}

# Check the arguments.
for option in "$@"; do
    case "$option" in
    -h | --help)
	usage
	exit 0 ;;
    -v | --version)
	echo "grub-install (GNU GRUB ${VERSION})"
	exit 0 ;;
    --root-directory=*)
	rootdir=`echo "$option" | sed 's/--root-directory=//'` ;;
    --grub-shell=*)
	grub_shell=`echo "$option" | sed 's/--grub-shell=//'` ;;
    --no-floppy)
	no_floppy="--no-floppy" ;;
    --force-lba)
	force_lba="--force-lba" ;;
    --recheck)
	recheck=yes ;;
    # This is an undocumented feature...
    --debug)
	debug=yes ;;
    -*)
	echo "Unrecognized option \`$option'" 1>&2
	usage
	exit 1
	;;
    *)
	if test "x$install_device" != x; then
	    echo "More than one install_devices?" 1>&2
	    usage
	    exit 1
	fi
	install_device="${option}" ;;
    esac
done

if test "x$install_device" = x; then
    echo "install_device not specified." 1>&2
    usage
    exit 1
fi

# If the debugging feature is enabled, print commands.
if test $debug = yes; then
    set -x
fi

# Initialize these directories here, since ROOTDIR was initialized.
case "$host_os" in
netbsd* | openbsd*)
    # Because /boot is used for the boot block in NetBSD and OpenBSD, use /grub
    # instead of /boot/grub.
    grub_prefix=/grub
    bootdir=${rootdir}
    ;;
*)
    # Use /boot/grub by default.
    bootdir=${rootdir}/boot
    ;;
esac

grubdir=${bootdir}/grub
device_map=${grubdir}/device.map

# Check if GRUB is installed.
# This is necessary, because the user can specify "grub --read-only".
set $grub_shell dummy
if test -f "$1"; then
    :
else
    echo "$1: Not found." 1>&2
    exit 1
fi

if test -f "$pkglibdir/stage1"; then
    :
else
    echo "${pkglibdir}/stage1: Not found." 1>&2
    exit 1
fi

if test -f "$pkglibdir/stage2"; then
    :
else
    echo "${pkglibdir}/stage2: Not found." 1>&2
    exit 1
fi

# Don't check for *stage1_5, because it is not fatal even if any
# Stage 1.5 does not exist.

# Create the GRUB directory if it is not present.
test -d "$bootdir" || mkdir "$bootdir" || exit 1
test -d "$grubdir" || mkdir "$grubdir" || exit 1

# If --recheck is specified, remove the device map, if present.
if test $recheck = yes; then
    rm -f $device_map
fi

# Create the device map file if it is not present.
if test -f "$device_map"; then
    :
else
    grub-mkdevicemap $no_floppy --device-map=$device_map
fi

# Make sure that there is no duplicated entry.
tmp=`sed -n '/^([fh]d[0-9]*)/s/\(^(.*)\).*/\1/p' $device_map \
    | sort | uniq -d | sed -n 1p`
if test -n "$tmp"; then
    echo "The drive $tmp is defined multiple times in the device map $device_map" 1>&2
    exit 1
fi

# Check for INSTALL_DEVICE.
case "$install_device" in
/dev/*)
    install_device=`resolve_symlink "$install_device"`
    install_drive=`convert "$install_device"`
    # I don't know why, but some shells wouldn't die if exit is
    # called in a function.
    if test "x$install_drive" = x; then
	exit 1
    fi ;;
\([hf]d[0-9]*\))
    install_drive="$install_device" ;;
[hf]d[0-9]*)
    # The GRUB format with no parenthesis.
    install_drive="($install_device)" ;;
*)
    echo "Format of install_device not recognized." 1>&2
    usage
    exit 1 ;;
esac

# Get the root drive.
root_device=`find_device ${rootdir}`
bootdir_device=`find_device ${bootdir}`

# Check if the boot directory is in the same device as the root directory.
if test "x$root_device" != "x$bootdir_device"; then
    # Perhaps the user has a separate boot partition.
    root_device=$bootdir_device
    grub_prefix="/grub"
fi

# Convert the root device to a GRUB drive.
root_drive=`convert "$root_device"`
if test "x$root_drive" = x; then
    exit 1
fi

# Check if the root directory exists in the same device as the grub
# directory.
grubdir_device=`find_device ${grubdir}`

if test "x$grubdir_device" != "x$root_device"; then
    # For now, cannot deal with this situation.
    cat <<EOF 1>&2
You must set the root directory by the option --root-directory, because
$grubdir does not exist in the root device $root_device.
EOF
    exit 1
fi

# Copy the GRUB images to the GRUB directory.
for file in ${grubdir}/stage1 ${grubdir}/stage2 ${grubdir}/*stage1_5; do
    rm -f $file || exit 1
done
for file in \
    ${pkglibdir}/stage1 ${pkglibdir}/stage2 ${pkglibdir}/*stage1_5; do
    cp -f $file ${grubdir} || exit 1
done

# Make a default file.
${grub_set_default} --root-directory=${rootdir} default

# Make sure that GRUB reads the same images as the host OS.
test -n "$mkimg" && img_file=`$mkimg`
test -n "$mklog" && log_file=`$mklog`

# GRUB will try to verify that stage2 is accessible using its own
# filesystem drivers.  Make sure it's committed to disk.
sync

# On XFS, sync() is not enough.
if [ x"`grub-probe --device-map=${device_map} -t fs ${grubdir}`" = "xxfs" ] ; then
  xfs_freeze -f ${grubdir} && xfs_freeze -u ${grubdir}
  # We don't have set -e.  If xfs_freeze failed, it's worth trying anyway,
  # maybe we're lucky.
fi

for file in ${grubdir}/stage1 ${grubdir}/stage2 ${grubdir}/*stage1_5; do
    count=5
    tmp=`echo $file | sed "s|^${grubdir}|${grub_prefix}|"`
    while test $count -gt 0; do
	$grub_shell --batch $no_floppy --device-map=$device_map <<EOF >$log_file
dump ${root_drive}${tmp} ${img_file}
quit
EOF
	if grep "Error [0-9]*: " $log_file >/dev/null; then
	    :
	elif cmp $file $img_file >/dev/null; then
	    break
	fi
	sleep 1
	count=`expr $count - 1`    
    done
    if test $count -eq 0; then
	echo "The file $file not read correctly." 1>&2
	exit 1
    fi
done

rm -f $img_file
rm -f $log_file

# Create a safe temporary file.
test -n "$mklog" && log_file=`$mklog`

# Before all invocations of the grub shell, call sync to make sure
# the raw device is in sync with any bufferring in filesystems.
sync

# Now perform the installation.
$grub_shell --batch $no_floppy --device-map=$device_map <<EOF >$log_file
root $root_drive
setup $force_lba --stage2=$grubdir/stage2 --prefix=$grub_prefix $install_drive
quit
EOF

if grep "Error [0-9]*: " $log_file >/dev/null || test $debug = yes; then
    cat $log_file 1>&2
    exit 1
fi

rm -f $log_file

# Prompt the user to check if the device map is correct.
echo "Installation finished. No error reported."
echo "This is the contents of the device map $device_map."
echo "Check if this is correct or not. If any of the lines is incorrect,"
echo "fix it and re-run the script \`grub-install'."
echo

cat $device_map

# Bye.
exit 0