libaria-dev 2.8.0+repack-1.2 / usr / include / Aria / ArTCM2.h

/*
Adept MobileRobots Robotics Interface for Applications (ARIA)
Copyright (C) 2004, 2005 ActivMedia Robotics LLC
Copyright (C) 2006, 2007, 2008, 2009, 2010 MobileRobots Inc.
Copyright (C) 2011, 2012, 2013 Adept Technology

     This program is free software; you can redistribute it and/or modify
     it under the terms of the GNU General Public License as published by
     the Free Software Foundation; either version 2 of the License, or
     (at your option) any later version.

     This program is distributed in the hope that it will be useful,
     but WITHOUT ANY WARRANTY; without even the implied warranty of
     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
     GNU General Public License for more details.

     You should have received a copy of the GNU General Public License
     along with this program; if not, write to the Free Software
     Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA

If you wish to redistribute ARIA under different terms, contact 
Adept MobileRobots for information about a commercial version of ARIA at 
robots@mobilerobots.com or 
Adept MobileRobots, 10 Columbia Drive, Amherst, NH 03031; +1-603-881-7960
*/
#ifndef ARTCM2_H
#define ARTCM2_H

#include "ariaUtil.h"
#include "ArFunctor.h"
#include "ArRobot.h"


#ifdef WIN32
#define ARTCM2_DEFAULT_SERIAL_PORT "COM4"
#else
#define ARTCM2_DEFAULT_SERIAL_PORT "/dev/ttyS3"
#endif


/** Interface to the PNI TCM 2, TCM 2.5, and TCM 2.6  3-axis compass (magnetometer)  that can sense absolute heading, as well as pitch, roll, and includes a temperature sensor.
 *
 * See subclasses and ArCompassConnector for more information, as well as 
 * your robot manuals.  PNI's TCM manual is also available for download at the 
 * MobileRobots support website, documentation section.
 *
 * This is an abstract interface. To create a compass interface object,
 * instantiate a subclass or use ArCompassConnector.

    @ingroup OptionalClasses
  @ingroup DeviceClasses
 *
 * @note The compass returns a heading relative to magnetic north, which varies
 * depending on your location in the Earth's magnetic field (declination also
 * varies slowly over time as the Earth's magnetic field changes).  To find true
 * north, you must apply an offset, or declination. For example, on 
 * June 1, 2007, the magnetic declination of MobileRobots' location 
 * of Amherst, NH, USA was 15 1/6 degrees West, so a value of approx. 
 * -15.166666 would have to be applied. You can look up declination values for 
 * various locations on Earth at 
 * http://www.ngdc.noaa.gov/seg/geomag/jsp/Declination.jsp
 */
class ArTCM2
{
public:
  
  AREXPORT ArTCM2();
  virtual ~ArTCM2() {}

  /** If a connection/initialization procedure is required, perform it, and
      return true on success, false on failure. Otherwise, just return true.
  */
  AREXPORT virtual bool connect();

  /** If a connection/initialization procedure is required, perform it, wait
   * until data is recieved from the compass, and
      return true on success, false on failure. Otherwise, just return true.
  */
  AREXPORT virtual bool blockingConnect(unsigned long connectTimeout = 5000);


  /// Get the compass heading (-180, 180] degrees
  double getHeading(void) const { return myHeading; }
  bool haveHeading() const { return myHaveHeading; }

  /** Get the compass heading (-180, 180] degrees
   *  @deprecated Use getHeading()
   */
  double getCompass(void) const { return getHeading(); }

  /// Get the pitch (-180,180] degrees.
  double getPitch(void) const { return myPitch; }
  bool havePitch() const { return myHavePitch; }

  /// Get the roll (-180,180] degrees.
  double getRoll(void) const { return myRoll; }
  bool haveRoll() const { return myHaveRoll; }

  /// Get the magnetic field X component (See TCM2 Manual)
  double getXMagnetic(void) const { return myXMag; }
  bool haveXMagnetic() const { return myHaveXMag; }

  /// Get the magnetic field Y component (See TCM2 Manual)
  double getYMagnetic(void) const { return myYMag; }
  bool haveYMagnetic() const { return myHaveYMag; }

  /// Get the magnetic field Z component (See TCM2 Manual)
  double getZMagnetic(void) const { return myZMag; }
  bool haveZMagnetic() const { return myHaveZMag; }

  /// Get the temperature (degrees C)
  double getTemperature(void) const { return myTemperature; }
  bool haveTemperature() const { return myHaveTemperature; }

  // Get last error code (see TCM manual) recieved. 0 means no error recieved.
  int getError(void) const { return myError; }

  /// Get the calibration H score (See TCM Manual)
  double getCalibrationH(void) const { return myCalibrationH; }
  bool haveCalibrationH() const { return myHaveCalibrationH; }

  /// Get the calibration V score (See TCM Manual)
  double getCalibrationV(void) const { return myCalibrationV; }
  bool haveCalibrationV() const { return myHaveCalibrationV; }

  /// Get the calibration M score (See TCM Manual)
  double getCalibrationM(void) const { return myCalibrationM; }
  bool haveCalibrationM() const { return myHaveCalibrationM; }

  /// Turn sending of data off (Compass remains powered on, this is not its not low power standby mode)
  virtual void commandOff(void) = 0;

  /// Get one reading from the compass
  virtual void commandOnePacket(void) = 0;

  /// Start the compass sending a continuous stream of readings at its fastest rate
  virtual void commandContinuousPackets(void) = 0;

  /// Start user calibration
  virtual void commandUserCalibration(void) = 0;

  /// Start auto calibration
  virtual void commandAutoCalibration(void) = 0;

  /// Stop calibration
  virtual void commandStopCalibration(void)  = 0;

  /// Command to do a soft reset of the compass
  virtual void commandSoftReset(void) = 0;

  /// Command to just send compass heading data
  virtual void commandJustCompass(void) = 0;

  /// Gets the number of readings recieved in the last second
  int getPacCount(void) {
    if(myTimeLastPacket == time(NULL)) return myPacCount;
    if(myTimeLastPacket == time(NULL) - 1) return myPacCurrentCount;
    return 0;
  }

  // Add a callback to be invoked when a new heading is recieved
  void addHeadingDataCallback(ArFunctor1<double> *f) {
    myHeadingDataCallbacks.push_back(f);
  }


protected:  
  double myHeading;
  double myPitch;
  double myRoll;
  double myXMag;
  double myYMag;
  double myZMag;
  double myTemperature;
  int myError;
  double myCalibrationH;
  double myCalibrationV;
  double myCalibrationM;

  bool myHaveHeading;
  bool myHavePitch;
  bool myHaveRoll;
  bool myHaveXMag;
  bool myHaveYMag;
  bool myHaveZMag;
  bool myHaveTemperature;
  bool myHaveCalibrationH;
  bool myHaveCalibrationV;
  bool myHaveCalibrationM;

  std::list< ArFunctor1<double>* > myHeadingDataCallbacks;

  // packet count
  time_t myTimeLastPacket;
  int myPacCurrentCount;
  int myPacCount;		

  void incrementPacketCount() {
    if (myTimeLastPacket != time(NULL)) 
    {
      myTimeLastPacket = time(NULL);
      myPacCount = myPacCurrentCount;
      myPacCurrentCount = 0;
    }
    myPacCurrentCount++;
  }


  // call the heading data callbacks
  void invokeHeadingDataCallbacks(double heading) {
    for(std::list<ArFunctor1<double>*>::iterator i = myHeadingDataCallbacks.begin(); i != myHeadingDataCallbacks.end(); ++i)
      if(*i) (*i)->invoke(heading);
  }
  
};


/** Use this class to create an instance of a TCM2 subclass
 * and connect to the device based on program command line options. 
 * This allows the user of a program to select a different kind
 * of compass configuration (for example, if the compass is connected
 * to a computer serial port, use ArTCMCompassDirect instead of
 * the normal ArTCMCompassRobot.)
 *
 * The following command-line arguments are checked:
 * @verbinclude ArCompassConnector_options
 */
class ArCompassConnector
{
protected:
  ArArgumentParser *myArgParser;
  ArRetFunctorC<bool, ArCompassConnector> myParseArgsCallback;
  ArFunctorC<ArCompassConnector> myLogArgsCallback;
  typedef enum {
    Robot,
    SerialTCM,
    None
  } DeviceType;
  DeviceType myDeviceType;
  const char *mySerialPort;
  AREXPORT bool parseArgs();
  ArFunctor *mySerialTCMReadFunctor;
  ArRobot *myRobot;
  AREXPORT void logOptions();
public:
  AREXPORT ArCompassConnector(ArArgumentParser *argParser);
  AREXPORT ~ArCompassConnector();
  AREXPORT ArTCM2 *create(ArRobot *robot);
  AREXPORT bool connect(ArTCM2*) const;
};

#endif // ARTCM2_H