libglibmm-2.4-dev 2.50.0-1 / usr / include / glibmm-2.4 / glibmm / timezone.h

// Generated by gmmproc 2.50.0 -- DO NOT MODIFY!
#ifndef _GLIBMM_TIMEZONE_H
#define _GLIBMM_TIMEZONE_H


/* Copyright (C) 2011 The glibmm Development Team
 *
 * This library is free software; you can redistribute it and/or
 * modify it under the terms of the GNU Lesser General Public
 * License as published by the Free Software Foundation; either
 * version 2.1 of the License, or (at your option) any later version.
 *
 * This library is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 * Lesser General Public License for more details.
 *
 * You should have received a copy of the GNU Lesser General Public
 * License along with this library; if not, write to the Free
 * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 */


#include <glibmmconfig.h>
#include <glibmm/refptr.h>
#include <glibmm/ustring.h>
#include <glib.h>

#ifndef DOXYGEN_SHOULD_SKIP_THIS
typedef struct _GTimeZone GTimeZone;
#endif

namespace Glib
{

/** @addtogroup glibmmEnums glibmm Enums and Flags */

/** 
 *  @var TimeType TIME_TYPE_STANDARD
 * The time is in local standard time.
 * 
 *  @var TimeType TIME_TYPE_DAYLIGHT
 * The time is in local daylight time.
 * 
 *  @var TimeType TIME_TYPE_UNIVERSAL
 * The time is in UTC.
 * 
 *  @enum TimeType
 * 
 * Disambiguates a given time in two ways.
 * 
 * First, specifies if the given time is in universal or local time.
 * 
 * Second, if the time is in local time, specifies if it is local
 * standard time or local daylight time.  This is important for the case
 * where the same local time occurs twice (during daylight savings time
 * transitions, for example).
 *
 * @ingroup glibmmEnums
 */
enum TimeType
{
  TIME_TYPE_STANDARD,
  TIME_TYPE_DAYLIGHT,
  TIME_TYPE_UNIVERSAL
};


/** TimeZone - A structure representing a time zone.
 * TimeZone is a structure that represents a time zone, at no particular point
 * in time. It is refcounted and immutable.
 *
 * A time zone contains a number of intervals. Each interval has an
 * abbreviation to describe it, an offet to UTC and a flag indicating if the
 * daylight savings time is in effect during that interval. A time zone always
 * has at least one interval -- interval 0.
 *
 * Every UTC time is contained within exactly one interval, but a given local
 * time may be contained within zero, one or two intervals (due to
 * incontinuities associated with daylight savings time).
 *
 * An interval may refer to a specific period of time (eg: the duration of
 * daylight savings time during 2010) or it may refer to many periods of time
 * that share the same properties (eg: all periods of daylight savings time).
 * It is also possible (usually for political reasons) that some properties
 * (like the abbreviation) change between intervals without other properties
 * changing.
 * @newin{2,30}
 */
class TimeZone
{
  public:
#ifndef DOXYGEN_SHOULD_SKIP_THIS
  using CppObjectType = TimeZone;
  using BaseObjectType = GTimeZone;
#endif /* DOXYGEN_SHOULD_SKIP_THIS */

  /** Constructs an invalid object.
   * E.g. for output arguments to methods. There is not much you can do with
   * the object before it has been assigned a valid value.
   */
  TimeZone();

  // Use make_a_copy=true when getting it directly from a struct.
  explicit TimeZone(GTimeZone* castitem, bool make_a_copy = false);

  TimeZone(const TimeZone& src);
  TimeZone& operator=(const TimeZone& src);

  TimeZone(TimeZone&& other) noexcept;
  TimeZone& operator=(TimeZone&& other) noexcept;

  ~TimeZone() noexcept;

  void swap(TimeZone& other) noexcept;

  GTimeZone*       gobj()       { return gobject_; }
  const GTimeZone* gobj() const { return gobject_; }

  ///Provides access to the underlying C instance. The caller is responsible for freeing it. Use when directly setting fields in structs.
  GTimeZone* gobj_copy() const;

protected:
  GTimeZone* gobject_;

private:

  
public:
  
  /** Creates a TimeZone corresponding to @a identifier.
   * 
   *  @a identifier can either be an RFC3339/ISO 8601 time offset or
   * something that would pass as a valid value for the `TZ` environment
   * variable (including <tt>nullptr</tt>).
   * 
   * In Windows, @a identifier can also be the unlocalized name of a time
   * zone for standard time, for example "Pacific Standard Time".
   * 
   * Valid RFC3339 time offsets are `"Z"` (for UTC) or
   * `"±hh:mm"`.  ISO 8601 additionally specifies
   * `"±hhmm"` and `"±hh"`.  Offsets are
   * time values to be added to Coordinated Universal Time (UTC) to get
   * the local time.
   * 
   * In UNIX, the `TZ` environment variable typically corresponds
   * to the name of a file in the zoneinfo database, or string in
   * "std offset [dst [offset],start[/time],end[/time]]" (POSIX) format.
   * There  are  no spaces in the specification. The name of standard
   * and daylight savings time zone must be three or more alphabetic
   * characters. Offsets are time values to be added to local time to
   * get Coordinated Universal Time (UTC) and should be
   * `"[±]hh[[:]mm[:ss]]"`.  Dates are either
   * `"Jn"` (Julian day with n between 1 and 365, leap
   * years not counted), `"n"` (zero-based Julian day
   * with n between 0 and 365) or `"Mm.w.d"` (day d
   * (0 <= d <= 6) of week w (1 <= w <= 5) of month m (1 <= m <= 12), day
   * 0 is a Sunday).  Times are in local wall clock time, the default is
   * 02:00:00.
   * 
   * In Windows, the "tzn[+|–]hh[:mm[:ss]][dzn]" format is used, but also
   * accepts POSIX format.  The Windows format uses US rules for all time
   * zones; daylight savings time is 60 minutes behind the standard time
   * with date and time of change taken from Pacific Standard Time.
   * Offsets are time values to be added to the local time to get
   * Coordinated Universal Time (UTC).
   * 
   * g_time_zone_new_local() calls this function with the value of the
   * `TZ` environment variable. This function itself is independent of
   * the value of `TZ`, but if @a identifier is <tt>nullptr</tt> then `/etc/localtime`
   * will be consulted to discover the correct time zone on UNIX and the
   * registry will be consulted or GetTimeZoneInformation() will be used
   * to get the local time zone on Windows.
   * 
   * If intervals are not available, only time zone rules from `TZ`
   * environment variable or other means, then they will be computed
   * from year 1900 to 2037.  If the maximum year for the rules is
   * available and it is greater than 2037, then it will followed
   * instead.
   * 
   * See
   * [RFC3339 §5.6](http://tools.ietf.org/html/rfc3339#section-5.6)
   * for a precise definition of valid RFC3339 time offsets
   * (the `time-offset` expansion) and ISO 8601 for the
   * full list of valid time offsets.  See
   * [The GNU C Library manual](http://www.gnu.org/s/libc/manual/html_node/TZ-Variable.html)
   * for an explanation of the possible
   * values of the `TZ` environment variable. See
   * [Microsoft Time Zone Index Values](http://msdn.microsoft.com/en-us/library/ms912391%28v=winembedded.11%29.aspx)
   * for the list of time zones on Windows.
   * 
   * You should release the return value by calling g_time_zone_unref()
   * when you are done with it.
   * 
   * @newin{2,26}
   * 
   * @param identifier A timezone identifier.
   * @return The requested timezone.
   */
  static TimeZone create(const Glib::ustring& identifier);
  
  /** Creates a TimeZone corresponding to local time.  The local time
   * zone may change between invocations to this function; for example,
   * if the system administrator changes it.
   * 
   * This is equivalent to calling g_time_zone_new() with the value of
   * the `TZ` environment variable (including the possibility of <tt>nullptr</tt>).
   * 
   * You should release the return value by calling g_time_zone_unref()
   * when you are done with it.
   * 
   * @newin{2,26}
   * 
   * @return The local timezone.
   */
  static TimeZone create_local();
  
  /** Creates a TimeZone corresponding to UTC.
   * 
   * This is equivalent to calling g_time_zone_new() with a value like
   * "Z", "UTC", "+00", etc.
   * 
   * You should release the return value by calling g_time_zone_unref()
   * when you are done with it.
   * 
   * @newin{2,26}
   * 
   * @return The universal timezone.
   */
  static TimeZone create_utc();

  
  /** Finds an the interval within @a tz that corresponds to the given @a time.
   * The meaning of @a time depends on @a type.
   * 
   * If @a type is TIME_TYPE_UNIVERSAL then this function will always
   * succeed (since universal time is monotonic and continuous).
   * 
   * Otherwise @a time is treated as local time.  The distinction between
   * TIME_TYPE_STANDARD and TIME_TYPE_DAYLIGHT is ignored except in
   * the case that the given @a time is ambiguous.  In Toronto, for example,
   * 01:30 on November 7th 2010 occurred twice (once inside of daylight
   * savings time and the next, an hour later, outside of daylight savings
   * time).  In this case, the different value of @a type would result in a
   * different interval being returned.
   * 
   * It is still possible for this function to fail.  In Toronto, for
   * example, 02:00 on March 14th 2010 does not exist (due to the leap
   * forward to begin daylight savings time).  -1 is returned in that
   * case.
   * 
   * @newin{2,26}
   * 
   * @param type The TimeType of @a time.
   * @param time A number of seconds since January 1, 1970.
   * @return The interval containing @a time, or -1 in case of failure.
   */
  int find_interval(TimeType type, gint64 time) const;
  
  /** Finds an interval within @a tz that corresponds to the given @a time,
   * possibly adjusting @a time if required to fit into an interval.
   * The meaning of @a time depends on @a type.
   * 
   * This function is similar to g_time_zone_find_interval(), with the
   * difference that it always succeeds (by making the adjustments
   * described below).
   * 
   * In any of the cases where g_time_zone_find_interval() succeeds then
   * this function returns the same value, without modifying @a time.
   * 
   * This function may, however, modify @a time in order to deal with
   * non-existent times.  If the non-existent local @a time of 02:30 were
   * requested on March 14th 2010 in Toronto then this function would
   * adjust @a time to be 03:00 and return the interval containing the
   * adjusted time.
   * 
   * @newin{2,26}
   * 
   * @param type The TimeType of @a time.
   * @param time A pointer to a number of seconds since January 1, 1970.
   * @return The interval containing @a time, never -1.
   */
  int adjust_time(TimeType type, gint64& time) const;
  
  /** Determines the time zone abbreviation to be used during a particular
   *  @a interval of time in the time zone @a tz.
   * 
   * For example, in Toronto this is currently "EST" during the winter
   * months and "EDT" during the summer months when daylight savings time
   * is in effect.
   * 
   * @newin{2,26}
   * 
   * @param interval An interval within the timezone.
   * @return The time zone abbreviation, which belongs to @a tz.
   */
  Glib::ustring get_abbreviation(int interval) const;
  
  /** Determines the offset to UTC in effect during a particular @a interval
   * of time in the time zone @a tz.
   * 
   * The offset is the number of seconds that you add to UTC time to
   * arrive at local time for @a tz (ie: negative numbers for time zones
   * west of GMT, positive numbers for east).
   * 
   * @newin{2,26}
   * 
   * @param interval An interval within the timezone.
   * @return The number of seconds that should be added to UTC to get the
   * local time in @a tz.
   */
  gint32 get_offset(int interval) const;
  
  /** Determines if daylight savings time is in effect during a particular
   *  @a interval of time in the time zone @a tz.
   * 
   * @newin{2,26}
   * 
   * @param interval An interval within the timezone.
   * @return <tt>true</tt> if daylight savings time is in effect.
   */
  bool is_dst(int interval) const;


};

} // namespace Glib


namespace Glib
{

/** @relates Glib::TimeZone
 * @param lhs The left-hand side
 * @param rhs The right-hand side
 */
inline void swap(TimeZone& lhs, TimeZone& rhs) noexcept
  { lhs.swap(rhs); }

} // namespace Glib

namespace Glib
{

  /** A Glib::wrap() method for this object.
   *
   * @param object The C instance.
   * @param take_copy False if the result should take ownership of the C instance. True if it should take a new copy or ref.
   * @result A C++ instance that wraps this C instance.
   *
   * @relates Glib::TimeZone
   */
Glib::TimeZone wrap(GTimeZone* object, bool take_copy = false);

} // namespace Glib


#endif /* _GLIBMM_TIMEZONE_H */