libhamlib-dev 3.0.1-1+b1 / usr / include / hamlib / rotator.h

/*
 *  Hamlib Interface - Rotator API header
 *  Copyright (c) 2000-2005 by Stephane Fillod
 *
 *
 *   This library is free software; you can redistribute it and/or
 *   modify it under the terms of the GNU Lesser General Public
 *   License as published by the Free Software Foundation; either
 *   version 2.1 of the License, or (at your option) any later version.
 *
 *   This library is distributed in the hope that it will be useful,
 *   but WITHOUT ANY WARRANTY; without even the implied warranty of
 *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 *   Lesser General Public License for more details.
 *
 *   You should have received a copy of the GNU Lesser General Public
 *   License along with this library; if not, write to the Free Software
 *   Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
 *
 */

#ifndef _ROTATOR_H
#define _ROTATOR_H 1

#include <hamlib/rig.h>
#include <hamlib/rotlist.h>

/**
 * \addtogroup rotator
 * @{
 */

/*! \file rotator.h
 *  \brief Hamlib rotator data structures.
 *
 *  This file contains the data structures and definitions for the Hamlib rotator API.
 *  see the rotator.c file for more details on the rotator API.
 */



__BEGIN_DECLS

/* Forward struct references */

struct rot;
struct rot_state;

/*! \typedef typedef struct rot ROT
 *  \brief Rotator structure definition (see rot for details).
 */
typedef struct rot ROT;


/*! \typedef typedef float elevation_t
 *  \brief Type definition for elevation.
 *
 *  The elevation_t type is used as parameter for the
 *  rot_set_position() and rot_get_position() functions.
 *
 *  Unless specified otherwise, the unit of elevation_t is decimal degrees.
 */
/*! \typedef typedef float azimuth_t
 *  \brief Type definition for azimuth.
 *
 *  The azimuth_t type is used as parameter for the
 *  rot_set_position() and rot_get_position() functions.
 *
 *  Unless specified otherwise, the unit of azimuth_t is decimal degrees.
 */
typedef float elevation_t;
typedef float azimuth_t;

/** \brief Token in the netrotctl protocol for returning error code */
#define NETROTCTL_RET "RPRT "

/*! \def ROT_RESET_ALL
 *  \brief A macro that returns the flag for the \b reset operation.
 *  \sa rot_reset(), rot_reset_t
 */
#define ROT_RESET_ALL	1

/*! \typedef typedef int rot_reset_t
 *  \brief Type definition for rotator reset.
 *
 *  The rot_reset_t type is used as parameter for
 *  the rot_reset() API function.
 */
typedef int rot_reset_t;


/** \brief Rotator type flags */
typedef enum {
	ROT_FLAG_AZIMUTH =		(1<<1),	/*!< Azimuth */
	ROT_FLAG_ELEVATION =	(1<<2)	/*!< Elevation */
} rot_type_t;

#define ROT_TYPE_MASK (ROT_FLAG_AZIMUTH|ROT_FLAG_ELEVATION)

#define ROT_TYPE_OTHER		0
#define ROT_TYPE_AZIMUTH	ROT_FLAG_AZIMUTH
#define ROT_TYPE_ELEVATION	ROT_FLAG_ELEVATION
#define ROT_TYPE_AZEL		(ROT_FLAG_AZIMUTH|ROT_FLAG_ELEVATION)


/*! \def ROT_MOVE_UP
 *  \brief A macro that returns the flag for the \b UP direction.
 *
 *  This macro defines the value of the \b UP direction which can be
 *  used with the rot_move() function.
 *
 *  \sa rot_move(), ROT_MOVE_DOWN, ROT_MOVE_LEFT, ROT_MOVE_CCW, ROT_MOVE_RIGHT, ROT_MOVE_CW
 */
/*! \def ROT_MOVE_DOWN
 *  \brief A macro that returns the flag for the \b DOWN direction.
 *
 *  This macro defines the value of the \b DOWN direction which can be
 *  used with the rot_move() function.
 *
 *  \sa rot_move(), ROT_MOVE_UP, ROT_MOVE_LEFT, ROT_MOVE_CCW, ROT_MOVE_RIGHT, ROT_MOVE_CW
*/
/*! \def ROT_MOVE_LEFT
 *  \brief A macro that returns the flag for the \b LEFT direction.
 *
 *  This macro defines the value of the \b LEFT direction which can be
 *  used with the rot_move function.
 *
 *  \sa rot_move(), ROT_MOVE_UP, ROT_MOVE_DOWN, ROT_MOVE_CCW, ROT_MOVE_RIGHT, ROT_MOVE_CW
 */
/*! \def ROT_MOVE_CCW
 *  \brief A macro that returns the flag for the \b counterclockwise direction.
 *
 *  This macro defines the value of the \b counterclockwise direction which
 *  can be used with the rot_move() function. This value is equivalent to
 *  ROT_MOVE_LEFT .
 *
 *  \sa rot_move(), ROT_MOVE_UP, ROT_MOVE_DOWN, ROT_MOVE_LEFT, ROT_MOVE_RIGHT, ROT_MOVE_CW
 */
/*! \def ROT_MOVE_RIGHT
 *  \brief A macro that returns the flag for the \b RIGHT direction.
 *
 *  This macro defines the value of the \b RIGHT direction which can be used
 *  with the rot_move() function.
 *
 *  \sa rot_move(), ROT_MOVE_UP, ROT_MOVE_DOWN, ROT_MOVE_LEFT, ROT_MOVE_CCW, ROT_MOVE_CW
 */
/*! \def ROT_MOVE_CW
 *  \brief A macro that returns the flag for the \b clockwise direction.
 *
 *  This macro defines the value of the \b clockwise direction wich can be
 *  used with the rot_move() function. This value is equivalent to
 *  ROT_MOVE_RIGHT .
 *
 *  \sa rot_move(), ROT_MOVE_UP, ROT_MOVE_DOWN, ROT_MOVE_LEFT, ROT_MOVE_CCW, ROT_MOVE_RIGHT
 */
#define ROT_MOVE_UP             (1<<1)
#define ROT_MOVE_DOWN           (1<<2)
#define ROT_MOVE_LEFT           (1<<3)
#define ROT_MOVE_CCW            ROT_MOVE_LEFT
#define ROT_MOVE_RIGHT          (1<<4)
#define ROT_MOVE_CW             ROT_MOVE_RIGHT

/* Basic rot type, can store some useful
 * info about different rotators. Each lib must
 * be able to populate this structure, so we can make
 * useful enquiries about capablilities.
 */

/*!
 * Rotator Caps
 * \struct rot_caps
 * \brief Rotator data structure.
 *
 * The main idea of this struct is that it will be defined by the backend
 * rotator driver, and will remain readonly for the application.
 * Fields that need to be modifiable by the application are
 * copied into the struct rot_state, which is a kind of private
 * of the ROT instance.
 * This way, you can have several rigs running within the same application,
 * sharing the struct rot_caps of the backend, while keeping their own
 * customized data.
 * NB: don't move fields around, as backend depends on it when initializing
 *     their caps.
 */
struct rot_caps {
  rot_model_t rot_model;                         /*!< Rotator model. */
  const char *model_name;                        /*!< Model name. */
  const char *mfg_name;                          /*!< Manufacturer. */
  const char *version;                           /*!< Driver version. */
  const char *copyright;                         /*!< Copyright info. */
  enum rig_status_e status;                      /*!< Driver status. */

  int rot_type;                                  /*!< Rotator type. */
  enum rig_port_e port_type;			 /*!< Type of communication port. */

  int serial_rate_min;                           /*!< Minimal serial speed. */
  int serial_rate_max;                           /*!< Maximal serial speed. */
  int serial_data_bits;                          /*!< Number of data bits. */
  int serial_stop_bits;                          /*!< Number of stop bits. */
  enum serial_parity_e serial_parity;            /*!< Parity. */
  enum serial_handshake_e serial_handshake;      /*!< Handshake. */

  int write_delay;                               /*!< Write delay. */
  int post_write_delay;                          /*!< Post-write delay. */
  int timeout;                                   /*!< Timeout. */
  int retry;                                     /*!< Number of retry if command fails. */

  /*
   * Movement range, az is relative to North
   * negative values allowed for overlap
   */
  azimuth_t min_az;                              /*!< Lower limit for azimuth (relative to North). */
  azimuth_t max_az;                              /*!< Upper limit for azimuth (relative to North). */
  elevation_t min_el;                            /*!< Lower limit for elevation. */
  elevation_t max_el;                            /*!< Upper limit for elevation. */


  const struct confparams *cfgparams;            /*!< Configuration parametres. */
  const rig_ptr_t priv;                          /*!< Private data. */

  /*
   * Rot Admin API
   *
   */

  int (*rot_init)(ROT *rot);
  int (*rot_cleanup)(ROT *rot);
  int (*rot_open)(ROT *rot);
  int (*rot_close)(ROT *rot);

  int (*set_conf)(ROT *rot, token_t token, const char *val);
  int (*get_conf)(ROT *rot, token_t token, char *val);

  /*
   *  General API commands, from most primitive to least.. :()
   *  List Set/Get functions pairs
   */

  int (*set_position)(ROT *rot, azimuth_t azimuth, elevation_t elevation);
  int (*get_position)(ROT *rot, azimuth_t *azimuth, elevation_t *elevation);

  int (*stop)(ROT *rot);
  int (*park)(ROT *rot);
  int (*reset)(ROT *rot, rot_reset_t reset);
  int (*move)(ROT *rot, int direction, int speed);

  /* get firmware info, etc. */
  const char* (*get_info)(ROT *rot);

  /* more to come... */
};


/*!
 * Rotator state
 * \struct rot_state
 * \brief Live data and customized fields.
 *
 * This struct contains live data, as well as a copy of capability fields
 * that may be updated (ie. customized)
 *
 * It is fine to move fields around, as this kind of struct should
 * not be initialized like caps are.
 */
struct rot_state {
	/*
	 * overridable fields
	 */
  azimuth_t min_az;            /*!< Lower limit for azimuth (overridable). */
  azimuth_t max_az;            /*!< Upper limit for azimuth (overridable). */
  elevation_t min_el;          /*!< Lower limit for elevation (overridable). */
  elevation_t max_el;          /*!< Upper limit for elevation (overridable). */

	/*
	 * non overridable fields, internal use
	 */
  hamlib_port_t rotport;             /*!< Rotator port (internal use). */

  int comm_state;	      /*!< Comm port state, opened/closed. */
  rig_ptr_t priv;             /*!< Pointer to private rotator state data. */
  rig_ptr_t obj;              /*!< Internal use by hamlib++ for event handling. */

  /* etc... */
};

/**
 * Rotator structure
 * \struct rot
 * \brief This is the master data structure,
 * acting as a handle for the controlled rotator.
 *
 * This is the master data structure, acting as a handle for the controlled
 * rotator. A pointer to this structure is returned by the rot_init() API
 * function and is passed as a parameter to every rotator specific API call.
 *
 * \sa rot_init(), rot_caps, rot_state
 */
struct rot {
	struct rot_caps *caps;      /*!< Rotator caps. */
	struct rot_state state;     /*!< Rotator state. */
};

/* --------------- API function prototypes -----------------*/

extern HAMLIB_EXPORT(ROT *) rot_init HAMLIB_PARAMS((rot_model_t rot_model));
extern HAMLIB_EXPORT(int) rot_open HAMLIB_PARAMS((ROT *rot));
extern HAMLIB_EXPORT(int) rot_close HAMLIB_PARAMS((ROT *rot));
extern HAMLIB_EXPORT(int) rot_cleanup HAMLIB_PARAMS((ROT *rot));

extern HAMLIB_EXPORT(int) rot_set_conf HAMLIB_PARAMS((ROT *rot, token_t token, const char *val));
extern HAMLIB_EXPORT(int) rot_get_conf HAMLIB_PARAMS((ROT *rot, token_t token, char *val));
  /*
   *  General API commands, from most primitive to least.. )
   *  List Set/Get functions pairs
   */
extern HAMLIB_EXPORT(int) rot_set_position HAMLIB_PARAMS((ROT *rot, azimuth_t azimuth, elevation_t elevation));
extern HAMLIB_EXPORT(int) rot_get_position HAMLIB_PARAMS((ROT *rot, azimuth_t *azimuth, elevation_t *elevation));
extern HAMLIB_EXPORT(int) rot_stop HAMLIB_PARAMS((ROT *rot));
extern HAMLIB_EXPORT(int) rot_park HAMLIB_PARAMS((ROT *rot));
extern HAMLIB_EXPORT(int) rot_reset HAMLIB_PARAMS((ROT *rot, rot_reset_t reset));
extern HAMLIB_EXPORT(int) rot_move HAMLIB_PARAMS((ROT *rot, int direction, int speed));
extern HAMLIB_EXPORT(const char*) rot_get_info HAMLIB_PARAMS((ROT *rot));

extern HAMLIB_EXPORT(int) rot_register HAMLIB_PARAMS((const struct rot_caps *caps));
extern HAMLIB_EXPORT(int) rot_unregister HAMLIB_PARAMS((rot_model_t rot_model));
extern HAMLIB_EXPORT(int) rot_list_foreach HAMLIB_PARAMS((int (*cfunc)(const struct rot_caps*, rig_ptr_t), rig_ptr_t data));
extern HAMLIB_EXPORT(int) rot_load_backend HAMLIB_PARAMS((const char *be_name));
extern HAMLIB_EXPORT(int) rot_check_backend HAMLIB_PARAMS((rot_model_t rot_model));
extern HAMLIB_EXPORT(int) rot_load_all_backends HAMLIB_PARAMS((void));
extern HAMLIB_EXPORT(rot_model_t) rot_probe_all HAMLIB_PARAMS((hamlib_port_t *p));

extern HAMLIB_EXPORT(int) rot_token_foreach HAMLIB_PARAMS((ROT *rot, int (*cfunc)(const struct confparams *, rig_ptr_t), rig_ptr_t data));
extern HAMLIB_EXPORT(const struct confparams*) rot_confparam_lookup HAMLIB_PARAMS((ROT *rot, const char *name));
extern HAMLIB_EXPORT(token_t) rot_token_lookup HAMLIB_PARAMS((ROT *rot, const char *name));

extern HAMLIB_EXPORT(const struct rot_caps *) rot_get_caps HAMLIB_PARAMS((rot_model_t rot_model));

extern HAMLIB_EXPORT(int) qrb HAMLIB_PARAMS((double lon1, double lat1,
						double lon2, double lat2,
						double *distance, double *azimuth));
extern HAMLIB_EXPORT(double) distance_long_path HAMLIB_PARAMS((double distance));
extern HAMLIB_EXPORT(double) azimuth_long_path HAMLIB_PARAMS((double azimuth));

extern HAMLIB_EXPORT(int) longlat2locator HAMLIB_PARAMS((double longitude,
						double latitude, char *locator_res, int pair_count));
extern HAMLIB_EXPORT(int) locator2longlat HAMLIB_PARAMS((double *longitude,
						double *latitude, const char *locator));

extern HAMLIB_EXPORT(double) dms2dec HAMLIB_PARAMS((int degrees, int minutes,
						double seconds, int sw));
extern HAMLIB_EXPORT(int) dec2dms HAMLIB_PARAMS((double dec, int *degrees,
						int *minutes, double *seconds, int *sw));

extern HAMLIB_EXPORT(int) dec2dmmm HAMLIB_PARAMS((double dec, int *degrees,
						double *minutes, int *sw));
extern HAMLIB_EXPORT(double) dmmm2dec HAMLIB_PARAMS((int degrees,
						     double minutes, int sw));

/*! \def rot_debug
 *  \brief Convenience definition for debug level.
 *
 *  This is just as convenience definition of the rotator debug level,
 *  and is the same as for the rig debug level.
 *
 *  \sa rig_debug
 */
#define rot_debug rig_debug

__END_DECLS

#endif /* _ROTATOR_H */

/** @} */