libitpp-dev 4.3.1-7 / usr / include / itpp / signal / transforms.h

/*!
 * \file
 * \brief Fourier, Hadamard, Walsh-Hadamard, and 2D Hadamard transforms -
 *        header file
 * \author Tony Ottosson, Thomas Eriksson, Simon Wood, Adam Piatyszek, Andy Panov and Bogdan Cristea
 *
 * -------------------------------------------------------------------------
 *
 * Copyright (C) 1995-2013  (see AUTHORS file for a list of contributors)
 *
 * This file is part of IT++ - a C++ library of mathematical, signal
 * processing, speech processing, and communications classes and functions.
 *
 * IT++ is free software: you can redistribute it and/or modify it under the
 * terms of the GNU General Public License as published by the Free Software
 * Foundation, either version 3 of the License, or (at your option) any
 * later version.
 *
 * IT++ is distributed in the hope that it will be useful, but WITHOUT ANY
 * WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
 * FOR A PARTICULAR PURPOSE.  See the GNU General Public License for more
 * details.
 *
 * You should have received a copy of the GNU General Public License along
 * with IT++.  If not, see <http://www.gnu.org/licenses/>.
 *
 * -------------------------------------------------------------------------
 */

#ifndef TRANSFORMS_H
#define TRANSFORMS_H

#include <itpp/base/vec.h>
#include <itpp/base/mat.h>
#include <itpp/base/matfunc.h>
#include <itpp/itexports.h>


namespace itpp
{

/*!
  \addtogroup fft
  \brief One dimensional fast fourier transform
  \author Tony Ottosson and Adam Piatyszek

  The functions \code X = fft(x) \endcode and \code x = ifft(X) \endcode are
  the fourier and inverse fourier transforms of size \a N defined as:
  \f[
  X(k) = \sum_{j=0}^{N-1} x(j) e^{-2\pi j k \cdot i / N}
  \f]

  \f[
  x(j) = \frac{1}{N} \sum_{k=0}^{N-1} X(k) e^{2\pi j k \cdot i / N}
  \f]

  \code Y = fft(X, N) \endcode performs zero-padding up to size N and then
  performs an N-size fft.

  The implementation is built upon one of the following libraries:
  - FFTW (version 3.0.0 or higher)
  - MKL (version 8.0.0 or higher)
  - ACML (version 2.5.3 or higher).

  \note FFTW-based implementation is the fastest for powers of two.
  Furthermore, the second time you call the routine with the same size,
  the calculation is much faster due to many things were calculated and
  stored the first time the routine was called.

  \note Achieving maximum runtime efficiency with the FFTW library on some
  computer architectures requires that data are stored in the memory with
  a special alignment (to 16-byte boundaries). The IT++ memory management
  functions and container classes do not generally allocate memory aligned
  this way, and as a result calling FFTW via the IT++ interface (i.e. the
  fft() function) may be slower than using the FFTW library directly.
  Therefore, FFTW users concerned about maximum possible performance may
  want to consider the possibility of calling the FFTW library and its
  memory management/allocation routines directly, bypassing the IT++
  storage classes and the fft() interface to FFTW.
*/

//!\addtogroup fft
//!@{

//! Run-time test if library is built with Fast Fourier Transforms enabled
ITPP_EXPORT bool have_fourier_transforms();
//! Fast Fourier Transform
ITPP_EXPORT void fft(const cvec &in, cvec &out);
//! Fast Fourier Transform
ITPP_EXPORT cvec fft(const cvec &in);
/*!
\brief Fast Fourier Transform with zero-padding up to size N

First N points of input vector are used to perform the transform if N < length(in). Padding with 0's is
performed if N > length(in).
*/
ITPP_EXPORT cvec fft(const cvec &in, const int N);
//! Inverse Fast Fourier Transform
ITPP_EXPORT void ifft(const cvec &in, cvec &out);
//! Inverse Fast Fourier Transform
ITPP_EXPORT cvec ifft(const cvec &in);
/*!
\brief Inverse Fast Fourier Transform with zero-padding up to size N

First N points of input vector are used to perform the transform if N < length(in). Padding with 0's is
performed if N > length(in).
*/
ITPP_EXPORT cvec ifft(const cvec &in, const int N);

//! Real Fast Fourier Transform
ITPP_EXPORT void fft_real(const vec& in, cvec &out);
//! Real Fast Fourier Transform
ITPP_EXPORT cvec fft_real(const vec& in);
/*!
\brief Real Fast Fourier Transform with zero-padding up to size N

First N points of input vector are used to perform the transform if N < length(in). Padding with 0's is
performed if N > length(in).
*/
ITPP_EXPORT cvec fft_real(const vec &in, const int N);
/*!
\brief Inverse Real Fast Fourier Transform.

Underlying implementation assumes Hermitian symmetry of the input spectra. Results are
unpredictable and depending on the implementation (MKL/ACML/FFTW) if this requirement is not met.
*/
ITPP_EXPORT void ifft_real(const cvec &in, vec &out);
/*!
\brief Inverse Real Fast Fourier Transform.

Underlying implementation assumes Hermittian symmetry of the input spectra. Results are
unpredictable and depending on the implementation (MKL/ACML/FFTW) if this requirement is not met.
*/
ITPP_EXPORT vec ifft_real(const cvec &in);
/*!
\brief Inverse Real Fast Fourier Transformon with zero-padding up to size N.

First N points of input vector are used to perform the transform if N < length(in). Padding with 0's is
performed if N > length(in).

Underlying implementation assumes Hermitian symmetry of the input subvector/padded sequence. Results are
unpredictable and depending on the implementation (MKL/ACML/FFTW) if this requirement is not  met.
*/
ITPP_EXPORT vec ifft_real(const cvec &in, const int N);
//!@}


/*!
  \addtogroup dct
  \brief One dimensional Dicrete Cosine Transform
  \author Tony Ottosson and Adam Piatyszek

  The functions \code X = dct(x) \endcode and \code x = idct(X) \endcode
  are the dicrete cosine and inverse discrete cosine transforms of size \a
  N defined as:
  \f[
  X(k) = w(k) \sum_{j=0}^{N-1} x(j) \cos \left(\frac{(2j+1)k \pi}{2N} \right)
  \f]

  \f[
  x(j) = \sum_{k=0}^{N-1} w(k) X(k) \cos \left(\frac{(2j+1)k \pi}{2N} \right)
  \f]
  where \f$w(k) = 1/sqrt{N}\f$ for \f$k=0\f$ and
  \f$w(k) = sqrt{2/N}\f$ for \f$k\geq 1\f$.

  The implementation is built upon one of the following libraries:
  - FFTW (version 3.0.0 or higher)
  - MKL (version 10.0.0 or higher)
  - ACML (version 4.4.0 or higher).

  \note FFTW-based implementation is the fastest for powers of two.
  Furthermore, the second time you call the routine with the same size,
  the calculation is much faster due to many things were calculated and
  stored the first time the routine was called.

  \note Achieving maximum runtime efficiency with the FFTW library on some
  computer architectures requires that data are stored in the memory with
  a special alignment (to 16-byte boundaries). The IT++ memory management
  functions and container classes do not generally allocate memory aligned
  this way, and as a result calling FFTW via the IT++ interface (i.e. the
  dct()/idct() function) may be slower than using the FFTW library
  directly. Therefore, FFTW users concerned about maximum possible
  performance may want to consider the possibility of calling the FFTW
  library and its memory management/allocation routines directly,
  bypassing the IT++ storage classes and the dct()/idct() interface to
  FFTW.
*/

//!\addtogroup dct
//!@{

//! Run-time test if library is built with cosine transforms enabled
ITPP_EXPORT bool have_cosine_transforms();
//! Discrete Cosine Transform (DCT)
ITPP_EXPORT void dct(const vec &in, vec &out);
//! Discrete Cosine Transform (DCT)
ITPP_EXPORT vec dct(const vec &in);
/*!
\brief Discrete Cosine Transform (DCT) with zero-padding up to size N

First N points of input vector are used to perform the transform if N < length(in). Padding with 0's is
performed if N > length(in).
*/
ITPP_EXPORT vec dct(const vec &in, const int N);
//! Inverse Discrete Cosine Transform (IDCT)
ITPP_EXPORT void idct(const vec &in, vec &out);
//! Inverse Discrete Cosine Transform (IDCT)
ITPP_EXPORT vec idct(const vec &in);
/*!
\brief Inverse Discrete Cosine Transform (IDCT) with zero-padding up to size N

First N points of input vector are used to perform the transform if N < length(in). Padding with 0's is
performed if N > length(in).
*/
ITPP_EXPORT vec idct(const vec &in, const int N);
//!@}


//!\addtogroup fht
//!@{

//! Fast Hadamard Transform
template <class T> Vec<T> dht(const Vec<T> &v);
//! Fast Hadamard Transform
template <class T> void dht(const Vec<T> &vin, Vec<T> &vout);
//! Fast Hadamard Transform - memory efficient. Stores the result in \c v
template <class T> void self_dht(Vec<T> &v);

//! Fast Walsh Hadamard Transform
template <class T> Vec<T> dwht(const Vec<T> &v);
//! Fast Walsh Hadamard Transform
template <class T> void dwht(const Vec<T> &vin, Vec<T> &vout);
//! Fast Walsh Hadamard Transform - memory efficient (result in \c v)
template <class T> void self_dwht(Vec<T> &v);

//! Fast 2D Hadamard Transform
template <class T> Mat<T> dht2(const Mat<T> &m);
//! Fast 2D Walsh Hadamard Transform
template <class T> Mat<T> dwht2(const Mat<T> &m);
//!@}

template <class T>
Vec<T> dht(const Vec<T> &v)
{
  Vec<T> ret(v.size());
  dht(v, ret);
  return ret;
}

//! Bit reverse
template <class T>
void bitrv(Vec<T> &out)
{
  int N = out.size();
  int j = 0;
  int N1 = N - 1;
  for(int i = 0; i < N1; ++i) {
    if(i < j) {
      T temp = out[j];
      out[j] = out[i];
      out[i] = temp;
    }
    int K = N / 2;
    while(K <= j) {
      j -= K;
      K /= 2;
    }
    j += K;
  }
}

template <class T>
void dht(const Vec<T> &vin, Vec<T> &vout)
{
  int N = vin.size();
  int m = levels2bits(N);
  it_assert_debug((1 << m) == N, "dht(): The vector size must be a power of two");

  vout.set_size(N);

  // This step is separated because it copies vin to vout
  for(int ib = 0; ib < N; ib += 2) {
    vout(ib) = vin(ib) + vin(ib + 1);
    vout(ib + 1) = vin(ib) - vin(ib + 1);
  }
  N /= 2;

  int l = 2;
  for(int i = 1; i < m; ++i) {
    N /= 2;
    int ib = 0;
    for(int k = 0; k < N; ++k) {
      for(int j = 0; j < l; ++j) {
        T t = vout(ib + j);
        vout(ib + j) += vout(ib + j + l);
        vout(ib + j + l) = t - vout(ib + j + l);
      }
      ib += 2 * l;
    }
    l *= 2;
  }

  vout /= static_cast<T>(std::sqrt(static_cast<double>(vin.size())));
}

template <class T>
void self_dht(Vec<T> &v)
{
  int N = v.size();
  int m = levels2bits(N);
  it_assert_debug((1 << m) == N, "self_dht(): The vector size must be a power "
                  "of two");

  int l = 1;
  for(int i = 0; i < m; ++i) {
    N /= 2;
    int ib = 0;
    for(int k = 0; k < N; ++k) {
      for(int j = 0; j < l; ++j) {
        T t = v(ib + j);
        v(ib + j) += v(ib + j + l);
        v(ib + j + l) = t - v(ib + j + l);
      }
      ib += 2 * l;
    }
    l *= 2;
  }

  v /= static_cast<T>(std::sqrt(static_cast<double>(v.size())));
}

template <class T>
Vec<T> dwht(const Vec<T> &v)
{
  Vec<T> ret(v.size());
  dwht(v, ret);
  return ret;
}

template <class T>
void dwht(const Vec<T> &vin, Vec<T> &vout)
{
  dht(vin, vout);
  bitrv(vout);
}


template <class T>
void self_dwht(Vec<T> &v)
{
  self_dht(v);
  bitrv(v);
}

template <class T>
Mat<T> dht2(const Mat<T> &m)
{
  Mat<T> ret(m.rows(), m.cols());
  Vec<T> v;

  for(int i = 0; i < m.rows(); ++i) {
    v = m.get_row(i);
    self_dht(v);
    ret.set_row(i, v);
  }
  for(int i = 0; i < m.cols(); ++i) {
    v = ret.get_col(i);
    self_dht(v);
    ret.set_col(i, v);
  }

  return transpose(ret);
}

template <class T>
Mat<T> dwht2(const Mat<T> &m)
{
  Mat<T> ret(m.rows(), m.cols());
  Vec<T> v;

  for(int i = 0; i < m.rows(); ++i) {
    v = m.get_row(i);
    self_dwht(v);
    ret.set_row(i, v);
  }
  for(int i = 0; i < m.cols(); ++i) {
    v = ret.get_col(i);
    self_dwht(v);
    ret.set_col(i, v);
  }

  return transpose(ret);
}

//! \cond

// ----------------------------------------------------------------------
// Instantiations
// ----------------------------------------------------------------------

ITPP_EXPORT_TEMPLATE template ITPP_EXPORT vec dht(const vec &v);
ITPP_EXPORT_TEMPLATE template ITPP_EXPORT cvec dht(const cvec &v);
ITPP_EXPORT_TEMPLATE template ITPP_EXPORT void dht(const vec &vin, vec &vout);
ITPP_EXPORT_TEMPLATE template ITPP_EXPORT void dht(const cvec &vin, cvec &vout);

ITPP_EXPORT_TEMPLATE template ITPP_EXPORT void self_dht(vec &v);
ITPP_EXPORT_TEMPLATE template ITPP_EXPORT void self_dht(cvec &v);

ITPP_EXPORT_TEMPLATE template ITPP_EXPORT vec dwht(const vec &v);
ITPP_EXPORT_TEMPLATE template ITPP_EXPORT cvec dwht(const cvec &v);
ITPP_EXPORT_TEMPLATE template ITPP_EXPORT void dwht(const vec &vin, vec &vout);
ITPP_EXPORT_TEMPLATE template ITPP_EXPORT void dwht(const cvec &vin, cvec &vout);

ITPP_EXPORT_TEMPLATE template ITPP_EXPORT void self_dwht(vec &v);
ITPP_EXPORT_TEMPLATE template ITPP_EXPORT void self_dwht(cvec &v);

ITPP_EXPORT_TEMPLATE template ITPP_EXPORT mat  dht2(const mat &m);
ITPP_EXPORT_TEMPLATE template ITPP_EXPORT cmat dht2(const cmat &m);

ITPP_EXPORT_TEMPLATE template ITPP_EXPORT mat  dwht2(const mat &m);
ITPP_EXPORT_TEMPLATE template ITPP_EXPORT cmat dwht2(const cmat &m);

//! \endcond

} // namespace itpp

#endif // #ifndef TRANSFORMS_H