liboce-modeling10 0.17.2-2 / usr / share / oce-0.17 / src / XSMessage / IGES.us

!LOADING PHASE
! general messages have been factorised in XSTEP general file
.9
Beginning of the IGES file reading.
!
.10
End of the IGES file reading.
!
.12
Header and Content of IGES file are loaded.
!
.18
Syntax error in the IGES file at line %d of the section %s.
!
.19
Syntax error in the IGES file at line %d of the section %s (line number may be incorrect).
!
.20
There is no Terminate Section, please check the end of the IGES file. The process continues.
!
.27
Entity %s : Directory Entry : there is no parameter. The process continues.
!
.28
Entity %s : Directory Entry : The parameter 1 (Type de l'entité) is incorrect.
!
.29
Entity %s, Type %d : Directory Entry : The Field 4 (Line Font Pattern) is incorrect (Not null pointer or Integer between 0 and 5 is expected). incorrect (not null pointer or integer between 0 and 5 is expected).
!
.30
Entity %s, Type %d : Directory Entry : The Field 5 (Level) is incorrect (Not null pointer or not null Integer is expected).
!
.31
Entity %s, Type %d : Directory Entry : The Field 6 (View) is incorrect (Not null pointer or Integer Zero is expected).
!
.32
Entity %s, Type %d : Directory Entry : The Field 7 (Transformation Matrix) is incorrect (Not null pointer or Integer Zero is expected).
!
.33
Entity %s, Type %d : Directory Entry : The Field 8 (Label Display Associativity) is incorrect (Not null pointer or Integer Zero is expected).
!
.34
Entity %s, Type %d : Directory Entry : The Field 13 (Color Number) is incorrect (Not null pointer or Integer between 0 and 8 is expected).
!
.35
Null Entity %s.
!
.36
Unknown Entity %s.
!
.37
Entity %s, Type %d : The Associativity list is incorrect.
!
.38
Entity %s, Type %d : The Property list is incorrect.
! ANALYSIS PHASE
.39
Global Section : Incorrect number of parameters (%d or %d parameters are expected).
!
.40
Global Section (Parameters 1 and 2) : Parameter Delimiter Character and Record Delimiter Character must be different.
!
.41
Global Section (Parameter 2) : The Parameter Delimiter Character is incorrect. Default character Coma is taken.
!
.42
Global Section (Parameter 2) : The Character Record Delimiter parameter is incorrect. Default character Semicolon is taken.
!
.43
Global Section (Parameter 8) : The Single Precision Magnitude parameter is incorrect (Expected Positive Integer). Default value 38 is taken.
!
.44
Global Section (Parameter 9) : The Single Precision Significance parameter is incorrect (Expected Positive Integer). Default value 6 is taken.
!
.45
Global Section (Parameter 10) : The Double Precision Magnitude parameter is incorrect (Expected Positive Integer). Default value 308 is taken.
!
.46
Global Section (Parameter 11) : The Double Precision Significance parameter is incorrect (Expected Positive Integer). Default value 15 is taken.
!
.47
Global Section (Parameter 13) : the Model Space Scale parameter is incorrect (Expected Positive). Default value 1.0 is taken.
!
.48
Global Section (Parameter 14) : The Unit Flag parameter is incorrect  (Integer between 1 et 11 is expected). Default value 2 is taken : Millimeters.
!
.49
Global Section (Parameter 15): The Unit Name parameter is not recognized. Default value 2 is taken : Millimeters.srl
!
.50
Global Section (Parameter 15) : The Unit Name parameter is undefined, ignored
!
.51
Global Section (Parameter 14 and 15) : The Unit Flag parameter doesn't correspond to the Unit Name parameter : Unit Name ignored.
!
.52
Global Section (Parameter 19) : The   (Expected Positive Real). Default value 0.0 is taken.
!
.53
Global Section (Parameter 23) : The Version Flag parameter is incorrect (Integer between 1 et 11 is expected. Default value 3 is taken : Version 2.0.
!
.54
Global Section (Parameter 24) : The Drafting Standard Flag parameter is incorrect (Integer beetween 0 et 7). Default value 3 is taken : No standard.Global Section (Parameter 25) : Last change Date parameter is undefined.
!
.55
Global Section (Parameter 25) : Last change Date parameter is undefined.
!
.56
Global Section (Parameter %d) : The Date parameter is undefined.
!
.57
Global Section (Parameter %d) : Incorrect Date Format.
!
.58
Entity %d : Directory Entry (Field 1) : The Entity Type Number field is incorrect (Expected Integer : %d).
!
.59
Entity %d, Type %d : Directory Entry (Field 3) : The Structure field is undefined.
!
.60
Entity %d, Type %d : Directory Entry (Field 4) : The Line Font Pattern field is incorrect (Pointer or Integer beteween 0 and 5 is expected). Default value 0 is taken.
!
.61
Entity %d, Type %d : Directory Entry (Field 5) : The Level field is incorrect (Pointer or Integer are expected). Default value 0 is taken.
!
.62
Entity %d, Type %d : Directory Entry (Field 6) : The View field is incorrect (Pointer or Zero are expected). Default value 0 is taken.
!
.63
Entity %d, Type %d : Directory Entry (Field 7): The Transformation Matrix field is incorrect (Pointer or Zero are expected). Default value 0 is taken.
!
.64
Entity %d, Type %d : Directory Entry (Field 8): The Label Display Entity  field is incorrect (Pointer or Zero are expected). Default value 0 is taken.
!
.65
Entity %d, Type %d : Directory Entry (Champ 9) : The Blank Status field is incorrect (Expected Integer : 0 or 1). 
!
.66
Entity %d, Type %d : Directory Entry (Field 9) : The Subordinate Entity Switch field is incorrect (Integer between 0 and 3 is expected). 
!
.67
Entity %d, Type %d : Directory Entry (Field 9) : The Entity Use Flag is incorrect  (Integer between 0 and 6 is expected). 
!
.68
Entity %d, Type %d : Directory Entry (Field 9) : The Hierarchy field is Incorrect (Integer between 0 and 2 is expected). 
!
.69
Entity %d, Type %d : Directory Entry (Field 12) : The Line Weight Number is undefined.
!
.70
Entity %d, Type %d : Directory Entry (Field 13) : The Color Number field is incorrect (Pointer or Integer between 0 and 8 is expected).
!
.71
Entity %d, Type %d : Directory Entry (Field 15) : The Form Number field is incorrect.
!
.72
Entity %d, Type %d : Directory Entry (Field 19): The Entity Subscript Number field is incorrect (Integer is expected).
!Type 116
.73
Parameter Data  : The parameter %d (Coordinate of Point) is incorrect (Expected Real).
!Type 116
.74
Parameter Data  : The parameter %d (Display Symbol) is incorrect (Subfigure Definition Entity, Type 308 is expected).
!Type 100
.75
Parameter Data  : The parameter 1 (ZT displacement of Arc) is incorrect (Expected Real).
!Type 100
.76
Parameter Data  : The parameter %d (Arc Center) is incorrect (Expected Real).
!Type 100
.77
Parameter Data  : The parameter %d (Start Point) is incorrect (Expected Real).
!Type 100
.78
Parameter Data  : The parameter %d (Terminate Point) is incorrect (Expected Real).
!Type 102
.79
Parameter Data : The parameter 1 (Number of Entities) is incorrect : %d (Expected Positive Integer).
!Type 102
.80
Parameter Data : Some pointers of the Entity list are null or negative : ignored (Point, Connect Point or Parameterized Curve Entities are expected).Entity %d, Type 104, Form %d : Parameter Data : The parameter %d (Conic Coefficient)  is incorrect (Expected Real).
!Type 104
.81
Parameter Data : The parameter %d (Conic Coefficient)  is incorrect (Expected Real).
!Type 104
.82
Parameter Data : The parameter 7 (Coordinate of Plane) is incorrect (Expected Real).
!Type 104
.83
Parameter Data : The parameter %d (Starting Point) is incorrect (Expected Real).
!Type 104
.84
Parameter Data : The parameter %d (Terminate Point) is incorrect (Expected Real).
!Type 106
.85
Parameter Data : The parameter 1 (Interpretation Flag) is incorrect (Expected Integer : %d).
!Type 106
.86
Parameter Data : The parameter 2 (Number of n-tuples) is incorrect (Expected Positive Integer).
!Type 106
.87
Parameter Data : The parameter 3 (Common Z Displacement) is incorrect (Expected Real).
!Type 106
.88
Parameter Data : All Data Point parameters are not of Real type.
!Type 110
.89
Parameter Data  : The parameter %d (Starting Point) is incorrect (Expected Real).
!Type 110
.90
Parameter Data  : The parameter %d (Terminate Point) is incorrect (Expected Real).
!Type 112
.91
Parameter Data : The parameter 1 (Spline Type) is incorrect (Integer between 1 and 6 is expected).
!Type 112
.92
Parameter Data (Parameter 2) : The parameter 2 (Degree of Continuity) is incorrect (Expected Integer).
!Type 112
.93
Parameter Data : The parameter 3 (Number of Dimensions) is incorrect (Expected Integer : 2 or 3).
!Type 112
.94
Parameter Data : The parameter 4 (Number of Segments) is incorrect (Expected Positive Integer).
!Type 112
.95
Parameter Data : All Break Point parameters are not of Real type.
!Type 112
.96
Parameter Data : The entity is planar but the parameters BZ, CZ. DZ are not null.
!Type 126
.97
Parameter Data : The parameter %d (Upper Index of Sum) is incorrect (Expected Positive Integer).
!Type 126
.98
Parameter Data : The parameter %d (Degree of Basis Functions) is incorrect (Expected Integer) : Default value 0 is taken.
!Type 126
.99
Parameter Data : The parameter %d (Planar/Non Planar Flag) is incorrect (Expected Boolean).
!Type 126
.100
Parameter Data : The parameter %d (Open/Closed Flag) is incorrect (Expected Boolean).
!Type 126
.101
Parameter Data : The parameter %d (Rational/Polynomial Flag) is incorrect (Expected Boolean).
!Type 126
.102
Parameter Data : The parameter %d (NonPeriodic/Periodic Flag) is incorrect (Expected Boolean).
!Type 126
.103
Parameter Data : All Knot Sequence parameters are not of Real type.
!Type 126
.104
Parameter Data : All Weight parameters are not of Positive Real type.
!Type 126
.105
Parameter Data  : The parameter %d (Control Point) is incorrect (Expected Real).
!Type 126
.106
Parameter Data : The parameter %d (Starting Value) is incorrect (Expected Real).
!Type 126
.107
Parameter Data : The parameter %d (Ending Value) is incorrect (Expected Real).
!Type 126
.108
Parameter Data : The parameter %d (Unit Normal) is incorrect (Expected Real).
!Type 126
.109
Parameter Data : The parameter %d (Unit Normal) is undefined for a planar curve.
!Type 130
.110
Parameter Data : The parameter 1 (Curve Entity to be offset) is incorrect (Curve Entity is expected).
!Type 130
.111
Parameter Data : The parameter 2 (Offset Distance Flag) is incorrect (Integer between 1 and 3 is expected).
!Type 130
.112
Parameter Data : The parameter 3 (Curve Entity whose coordinate describes the offset) is incorrect (Curve Entity is expected).
!Type 130
.113
Parameter Data : The parameter 4 (Particular Coordinate) is incorrect (Expected Integer).
!Type 130
.114
Parameter Data : The parameter 5 (Tapered Offset Type Flag) is incorrect (Expected Integer).ppp
!Type 130
.115
Parameter Data : The parameter 6 (First Offset distance) is incorrect (Expected Real).
!Type 130
.116
Parameter Data : The parameter 7 (Arc Length of First Offset Distance) is incorrect (Expected Real).
!Type 130
.117
Parameter Data : The parameter 8 (Second Offset Distance) is incorrect (Expected Real).
!Type 130
.118
Parameter Data : The parameter 9 (Arc Length of Second Offset Distance) is incorrect (Expected Real).
!Type 130
.119
Parameter Data : The parameter 13 (Offset Curve Starting Parameter Value) is incorrect (Expected Real).
!Type 130
.120
Parameter Data : The parameter 14 (Offset Curve Ending Parameter Value) is incorrect (Expected Real).
!Type 130
.121
Parameter Data  : The parameter %d (Unit Vector Normal to plane) is incorrect (Expected Real).
!Type 141
.122
Parameter Data : The parameter 1 (Type of Bounded Surface Representation) is incorrect (Expected Integer : 0 or 1).
!Type 141
.123
Parameter Data : The parameter 2 (Trimming Curves Representation) is incorrect (Integer between 0 and 3 is expected).
!Type 141
.124
Parameter Data : The parameter 3 (Untrimmed Surface) is incorrect (Untrimmed Surface Entity is expected).
!Type 141
.125
Parameter Data : Not parametric Surface %d (parameter 3).
!Type 141
.126
Parameter Data :  The parameter 4 (Number of Curves) is incorrect (Expected positive).
!Type 141
.127
Parameter Data : The parameter 5 (Model Space Curve) is incorrect (Curve Entity is expected).
!Type 141
.128
Parameter Data (Parameter 6) : The Orientation Flag parameter is incorrect (Expected Integer : 1 or 2).
!Type 141
.129
Parameter Data : The parameter 7 (Number of Associated Parameter Space Curves) is incorrect (Expected Integer : 0).
!Type 141
.130
Parameter Data : Some pointers of the Parameter Space Curve list are null or negative : ignored (Curve Entities are expected).
!Type 142
.131
Parameter Data : The parameter 2 (Surface on which the curve lies) is incorrect (Surface Entity is expected).
!Type 142
.132
Parameter Data : Le parameter 3 (Curve 2D) is incorrect (Curve Entity is expected).
!Type 142
.133
Parameter Data : Le parameter 4 (Curve 3D) is incorrect (Curve Entity is expected).
!Type 142
.134
Parameter Data : The pointers of Curve 2D and 3D are null (parameter 3 and 4) (Curve Entities are expected).
!Type 108
.135
Parameter Data : The parameter %d (Coefficient Of Plane) is incorrect (Expected Real).
!Type 108
.136
Parameter Data : Le parameter 5 (Closed Curve) is incorrect (Curve Entity is expected).
!Type 108
.137
Parameter Data  : The parameter 5 (Expected Null pointer when the Form Number field is 0).
!Type 108
.138
Parameter Data : The parameter 9 (Display Symbol Size) is incorrect (Expected Real).
!Type 108
.139
Parameter Data  : The parameter %d (Coordinate of Display Symbol) is incorrect (Expected Real).
!Type 114
.140
Parameter Data : The parameter 1 (Spline Boundary Type) is incorrect  (Integer between 1 and 6 is expected).
!Type 114
.141
Parameter Data : The parameter 3 (Number of U Segments) is incorrect (Expected Positive Integer).
!Type 114
.142
Parameter Data : Le parameter 4 (Number of V Segments) is incorrect (Expected Positive Integer).
!Type 114
.143
Parameter Data : All Breakpoint in U parameters are not of Real type.
!Type 114
.144
Parameter Data : All Breakpoint in V parameters are not of Real type.
!Type 114
.145
Parameter Data : All %s Coefficient of Patch parameter(s) are not of Real type.
!Type 114
.146
Parameter Data : The parameter %d (Last Z Coefficient of Patch) is  incorrect  (Expected Real).
!Type 114
.147
Parameter Data : The %s Coefficient of Patch parameters are incorrect (Expected Integer : 16).
!Type 118
.148
Parameter Data : Le parameter 1 (First Curve) is incorrect (Curve Entity is expected).
!Type 118
.149
EParameter Data : Le parameter 2 (Second Curve) is incorrect (Curve Entity is expected).
!Type 118
.150
Parameter Data : The parameter 3 (Direction Flag) is incorrect (Integer 0 or 1 is expected).
!Type 118
.151
Parameter Data : The parameter 4 (Developable Surface Flag) is incorrect (Integer 0 or 1 is expected).
!Type 120
.152
Parameter Data : The parameter 1 (Axis of Revolution) is incorrect (Expected entity).
!Type 120
.153
Parameter Data : The parameter 2 (Generatrix Entity) is incorrect (Expected Entity).
!Type 120
.154
Parameter Data : The parameter 3 (Start Angle) is incorrect (Expected Real).
!Type 120
.155
Parameter Data : The parameter 4 (Terminate Angle) is incorrect (Expected Real)
!Type 122
.156
Parameter Data : The parameter 1 (Generatrix Entity) is incorrect (Expected Curve Entity).
!Type 122
.157
Parameter Data  : The parameter %d (Coordinate of the Terminate Point) is incorrect (Expected Real).
!Type 128
.158
Parameter Data : Incorrect Additional value (Expected Real).
!Type 128
.159
Parameter Data : Additional Real value :  ignored.
!Type 128
.160
Parameter Data : Invalid Number of First Knots sequence (Expected number : %d).
!Type 128
.161
Parameter Data : Invalid Number of Second Knots sequence (Expected number : %d).
!Type 140
.162
Parameter Data  : The parameter %d (Coordinate of Offset Indicator) is incorrect (Expected Real).
!Type 140
.163
Parameter Data : The parameter 4 (Offset Distance) is incorrect (Expected Real).
!Type 140
.164
Parameter Data : The parameter 5 (Surface Entity to be offset) is incorrect (Expected Surface Entity).
!Type 143
.165
Parameter Data : The parameter 1 (Bounded Surface Representation Type) is incorrect (Integer 0 or 1 is expected).
!Type 143
.166
Parameter Data : Le parameter 2 (Surface Entity to be Bounded) is incorrect (Surfacey Entity is expected).
!Type 143
.167
Parameter Data : The parameter 3 (Number of Boundary Entities) is incorrect (Expected Positive Integer).
!Type 143
.168
Parameter Data : The parameter %d (Boudary Entity)  is incorrect (Boundary Entity, Type 141 is expected).
!Type 144
.169
Parameter Data : The parameter 1 (Surface to be trimmed)  is incorrect (Surface Entity is expected).
!Type 144
.170
Parameter Data : The parameter 2 (Outer Boundary Type) is incorrect (Integer 0 or 1 is expected).
!Type 144
.171
Parameter Data : The parameter 3 (Number of Inner Boundary Closed Curves) is incorrect (Expected Positive Integer).
!Type 144
.172
Parameter Data : The parameter 4 (Outer Boundary)  is incorrect (Curve on a Parametric Surface Entity, Type 142 is expected).
!Type 144
.173
Parameter Data : The parameter %d (Inner Boundary) is incorrect (Curve on a Parametric Surface Entity, Type 142 is expected).
!Type 190
.174
Parameter Data : The parameter 1 (Point on the Surface) is incorrect (Point Entity, Type 116 is expected).
!Type 190
.175
Parameter Data : The parameter 2 ( Surface Normal Direction) is incorrect (Direction Entity is expected).
!Type 190
.176
Parameter Data : The parameter 3  (Reference Direction) is incorrect (Direction Entity is expected).
!Type 190
.177
Parameter Data : The parameter 3 (Null pointer is expected when the Form Number field is 1).
!Type 186
.178
Parameter Data : The parameter 1 (Shell) is incorrect (Closed Shell Entity, Type 514, Form 1 is expected).
!Type 186
.179
Parameter Data : The parameter %d (Void Shell) is incorrect (Closed Shell Entity, Type 514, Form 1 is expected).
!Type 186
.180
Parameter Data : The parameter %d (Orientation Flag) is incorrect (Expected Boolean).
!Type 186
.181
Parameter Data : The parameter 3 (Number of Void Shells) is incorrect (Expected Positive Integer)
!Type 502
.182
Parameter Data : The parameter 1 (Number of Vertex Tuples) is incorrect (Expected Positive Integer).
!Type 502
.183
Parameter Data  : The parameter %d (Coordinate of Vertex) is incorrect (Expected Real).
!Type 504
.184
Parameter Data : The parameter 1 (Number of Edge Tuples) is incorrect (Expected Positive Integer).
!Type 504
.185
Parameter Data : The parameter 2 (Model Space Curve) is incorrect (Curve Entity is expected).
!Type 504
.186
Parameter Data : The parameter %d (Start Vertex Index) is incorrect (Expected Integer).
!Type 504
.187
Parameter Data : The parameter %d (Terminate Vertex Index) is incorrect (Expected Integer).
!Type 504
.188
Entity %d, Type 504 : Parameter Data : The parameter %d (Start Vertex List Entity) is incorrect (Vertex List Entity, Type 502 is expected).
!Type 504
.189
Entity %d, Type 504 : Parameter Data : The parameter %d (Terminate Vertex List Entity) is incorrect (Vertex List Entity, Type 502 is expected).
!Type 508
.190
Parameter Da ta : The parameter %d (Edge Type) is incorrect (Integer 0 or 1 is expected).
!Type 508
.191
Parameter Data : The parameter %d (List Index) is incorrect (Expected Integer).
!Type 508
.192
Parameter Data : The parameter %d (Number of Parameter Curves) is incorrect (Expected Positive Integer).
!Type 508
.193
Parameter Data : The parameter %d (Vertex or Edge List Entity) is incorrect (Vertex List  or Edge List Entity, Type 502 or 504 is expected).
!Type 508
.194
Parameter Data : The parameter %d (Parameter Space Curve) is incorrect (Curve Entity is expected).
!Type 508
.195
Parameter Data : The parameter %d (Isoparametric Flag) is incorrect (Expected Boolean).
!Type 510
.196
Parameter Data : The parameter 1 (Surface) is incorrect (Surface Entity is expected).
!Type 510
.197
Parameter Data : The parameter 2 (Number of Loops) is incorrect (Expected Positive Integer).
!Type 510
.198
Parameter Data : The parameter 3 (Outer Loop flag) is incorrect (Expected Boolean).
!Type 510
.199
Parameter Data : The parameter %d (Loop of the Face) is incorrect (Loop Entity, Type 508 is expected).
!Type 514
.200
Parameter Data : The parameter 1 (Number of Faces) is incorrect (Expected Positive Integer).
!Type 514
.201
Parameter Data : The parameter 2 (Face) is incorrect (Face Entity, Type 510 is expected).
!Type 402, Form 1 or 7
.202
Form %d : Parameter Data : The parameter 1 (Number of Entries) is incorrect (Expected Integer).
!Type 402, Form 1 or 7
.203
Form %d : Parameter Data : Some pointers of the Entity list are nul or negative : ignored (Entities are expected).
!Type 402
.204
Form 9 : Parameter Data : The parameter 1 (Number of Parent Entity) is incorrect  (Expected Integer : 1).
!Type 402
.205
Form 9 : Parameter Data : The parameter 2 (Number of Children) is incorrect  (Expected Positive Integer).
!Type 402
.206
Form 9 : Parameter Data : The parameter 3 (Parent Entity) is incorrect (Entity expected).
!Type 402
.207
Form 9 : Parameter Data : Some pointers of the Child Entity List are null or negative : ignored (Entities are expected).
!Type 308
.208
Parameter Data : The parameter 1 (Depth of Subfigure) is incorrect  (Expected Integer).
!Type 308
.209
Parameter Data : The parameter 2 (Subfigure Name) is incorrect : %s (Expected String in hollerith Form).
!Type 308
.210
Parameter Data : The parameter 3 (Number of Entities) is incorrect  (Expected Positive Integer).
!Type 308
.211
Parameter Data : Some pointers of the Associated Entity List are null or negative : ignored (Entities are expected).
!Type 408
.212
Parameter Data : The parameter 1 (Subfigure definition entity) is incorrect (Subfigure definition entity, Type 308 expected).
!Type 408
.213
Parameter Data  : The parameter %d (Translation data) is incorrect (Expected Real).
!Type 408
.214
Parameter Data  : The parameter 5 (Scale Factor) is incorrect (Expected Real). Default value 1.0 is taken.
!Type 124
.215
Parameter Data  : All parameters are not of Real type.
!
.216
Null reference.
!
.217
Null entity.
!
.218
Incorrect Type.
!
.219
Negative pointer.
!ADDED MESSAGES
.220
Number of associativities is incorrect (Expected integer).
!
.221
Number of properties is incorrect (Expected integer).

!TRANSLATION PHASE
.222
Entity %s, Type %d : The entity points to an invalid object : Halt of the entity translation.
!
.223
Entity %s, Type %d : The resulting edge is not Same Parameter.
!
.224
Entity %s, Type %d : Software error : Halt of the translation entity.
!
.225
Entity %s, Type %d : Entity is empty.
!
.226
Entity %s, Type %d : Directory Entry (Parameter 7) : Transformation Matrix entity points to an invalid object.
!
.227
Entity %s, Type %d : Entities Type 116 or 132 cannot appear consecutively in the Entity Type 102.
!
.228
Entity %s, Type %d : Reference to illegal entity type %d.
!
.229
Entity %s, Type %d : The curve has been reversed.
!
.230
Entity %s, Type %d : The curve was lightly disconnected : repaired.
!
.231
Entity %s, Type %d : The curve was too much disconnected : impossible reparation.
!
.232
Entity %s, Type %d : The Entity is not closed
!
.233
Entity %s, Type %d : Software error : Invalid 2D curve, recomputed from 3D curve.
!
.234
Entity %s, Type %d : Software error : Invalid 3D curve, recomputed from 2D curve.
!
.235
Entity %s, Type %d : Software error : Invalid 2D and 3D curves.
!
.236
Entity %s, Type %d : The entity was self-intersecting, repaired. 
!
.237
Entity %s, Type %d : Parameter Data : The parameter 2 (Offset distance flag) different from 1 is not implemented.
!
.238
Entity %s, Type %d : Incorrect curve length with regard to parameter 14 (Offset curve ending) of the entity %s Type %d.
!
.239
Entity %s, Type %d : B-Spline curve of continuity C0 cannot be splitted into C1 curves. Result is null.!
!
.240
Entity %s, Type %d  : B-Spline curve of continuity C0 was splitted into C1 curves.
!
.241
Entity %s, Type %d : Parameter Data : The parameter 1 (Type of bounded surface representation = 0) is not implemented.
!
.242
Entity %s, Type %d : Not implemented entity.
!
.243
Entity %s, Type %d :Parameter Data : (Parametesr 1 to 6) The coefficients don't satisfy the conic equation.
!
.244
Entity %s, Type %d : Parameter Data (Parameters 8 to 11) : Start and terminate coordinates of the arc are the same.
!
.245
Entity %s, Type %d : Transformation will not be applied to 2D object.
!
.246
Entity %s, Type %d : Parameter Data : The parameter 4 (Number of segments) is less than 1.
!
.247
Entity %s, Type %d : Polynomial equation is not correct.
!
.248
Entity %s, Type %d : Error during creation of control points. 
!
.249
Entity %s, Type %s : Parameter Data : The parameter 1 (Spline type > 3) is not implemented.
!
.250
Entity %s, Type %d : The result is not guaranteed to be C0.
!
.251
Entity %s, Type %d : Parameter Data : The parameter 2 (Degree of basis functions) is less than 0 or greater than maximum degree.
!
.252
Entity %s, Type %d : Parameter Data : Incorrect number of points (2 or more are expected).
!
.253
Entity %s, Type %d : Translation error : %sStarting multiplicity > %s degree + 1.
!
.254
Entity %s, Type %d : Translation error : %s Ending multiplicity > %s degree + 1.
!
.255
Entity %s, Type %d : %sMultiplicity of knot %d > %s degree, repaired
!
.256
Entity %s, Type %d : Sum of %smultiplicities is not equal to the sum (number of poles + %sdegree + 1).
!
.257
Entity %s, Type %d : All weights are not positive.
!
.258
Entity %s, Type %d : The entity is polynomial.
!
.259
Entity %s, Type %d : Start point and Terminate point of the %sline are the same.
!
.260
Entity %s, Type %d, Form %d : The vector is ignored.
!
.261
Entity %s, Type %d : Resulting surface is C0-continuous.
!
.262
Entity %s, Type %d : Basis surface is C0 continious and is translated to the shell. Only the first face in the shell is offset.
!
.263
Entity %s, Type %d : The entity points to an invalid object, ignored.
!
.264
Entity %s, Type %d : The entity could not be translated, ignored.
!
.265
Entity %s, Type %d : The entity is not coplanar to the entity %s, Type %d.
!
.266
Entity %s, Type %d : Parameter Data : The parameter 3 or 4 (Number of U or V segments) is less than 1.
!
.267
Entity %s, Type %d : Parameter Data : The parameter 3 or 4 (Degree of first or second basis functions) is less than 0 or greater than maximum degree.
!
.268
Entity %s, Type %d : Parameter Data : Number of XYZ coordinates of control points (%s direction) is less than 2.
!
.269
Entity %s, Type %d : Control points construction error. Result is null.
!
.270
Entity %s, Type %d : Software error during translation of the Vertex number %d.
!
.271
Entity %s, Type %d : Translation result of the entity is not implemented.
!
.272
Beginning of the "Analysis" phase of the IGES file %s.
!
.273
End of the "Analysis" phase of the IGES file %s (Elapsed time : %s)..
!
.274
Beginning of the "Translation" phase of the IGES file %s.
!
.275
End of the "Translation" phase of the IGES file %s (Elapsed time : %s)..