libopal-dev 3.10.10~dfsg2-2+b2 / usr / include / opal / rtp / metrics.h

/*
 * metrics.h
 *
 * E-Model implementation
 *
 * Open Phone Abstraction Library (OPAL)
 *
 * Copyright (c) 2010 Universidade Federal do Amazonas
 *
 * The contents of this file are subject to the Mozilla Public License
 * Version 1.0 (the "License"); you may not use this file except in
 * compliance with the License. You may obtain a copy of the License at
 * http://www.mozilla.org/MPL/
 *
 * Software distributed under the License is distributed on an "AS IS"
 * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
 * the License for the specific language governing rights and limitations
 * under the License.
 *
 * Contributor(s): ______________________________________.
 *
 * $Revision: 27699 $
 * $Author: rjongbloed $
 * $Date: 2012-05-24 20:35:37 -0500 (Thu, 24 May 2012) $
 */

#ifndef OPAL_RTP_METRICS_H
#define OPAL_RTP_METRICS_H

#ifdef P_USE_PRAGMA
#pragma interface
#endif

#include <opal/buildopts.h>

#if OPAL_RTCP_XR

#include <rtp/rtp.h>

#include <list>

class RTP_Session;
class RTP_DataFrame;

///////////////////////////////////////////////////////////////////////////////
// RTCP-XR - VoIP Metrics Report Block

/**This is a class used to calculate voice quality metrics acording to the
   E-Model, proposed by ITU-T G.107 recomendation.	
  */
class RTCP_XR_Metrics
{
  protected:
    RTCP_XR_Metrics(
      float    Ie,
      float    Bpl,
      float    lookAheadTime,
      PINDEX   payloadSize,
      unsigned payloadBitrate
    );

  public:
    static RTCP_XR_Metrics * Create(const RTP_DataFrame & frame);

    ~RTCP_XR_Metrics();

    enum PacketEvent {
      PACKET_RECEIVED,
      PACKET_DISCARDED,
      PACKET_LOST
    };

    enum PeriodType {
      GAP,     /* a period of low packet losses and/or discards */
      BURST,   /* a period of a high proportion of packet losses and/or discards */
    };

    /* A period of time, which can be a burst or a gap */
    typedef struct TimePeriod {
      PeriodType      type;
      PTimeInterval   duration;
    } TimePeriod;

    /**A period of time, used to calculate an average Id, needed to compute the R factor.
       Id factor represents the impairments caused by delay.
      */
    typedef struct IdPeriod {
      PTimeInterval duration;
      float         Id;
    } IdPeriod;

    /**A period of time, used to calculate an average Ie, needed to compute the R factor.
       Ie factor represents the impairments caused by low bit-rate codecs.
      */
    typedef struct IePeriod {
      PeriodType    type;
      PTimeInterval duration;
      float         Ieff;
    } IePeriod;

    enum QualityType {
      LQ,  /* Listening Quality, not include the effects of delay */
      CQ   /* Conversational Quality, include the effects of delay */
    };

    /**Set the jitter buffer delay.
       This must be called to obtain the Id parameter.
      */
    void SetJitterDelay(
      DWORD delay   ///<  The jitter buffer delay in milliseconds
    );

    /**Called when a packet is received.
      */
    void OnPacketReceived();

    /**Called when a packet is discarded.
      */
    void OnPacketDiscarded();

    /**Called when a packet is lost.
      */
    void OnPacketLost();

    /**Called when several packets are lost.
      */
    void OnPacketLost(
      DWORD dropped   ///< Number of lost packets.
    );

    /**Called when a Sender Report is receveid.
      */
    void OnRxSenderReport(
      PUInt32b lsr,   ///< "Last SR" field of the received SR.
      PUInt32b dlsr   ///< "Delay since the last SR" field of the received SR.
    );

    /**Get the fraction of RTP packets lost since the beginning of the reception.
      */
    BYTE GetLossRate();

    /**Get the fraction of RTP packets discarded since the beginning of the reception.
      */
    BYTE GetDiscardRate();

    /**Get the fraction of RTP packets lost/discarded within burst periods since
       the beginning of the reception.
      */
    BYTE GetBurstDensity();

    /**Get the fraction of RTP packets lost/discarded within gap periods since
       the beginning of the reception.
      */
    BYTE GetGapDensity();

    /**Get the mean duration, in milliseconds, of burst periods since the
       beginning of the reception.
     */
    PUInt16b GetBurstDuration();

    /**Get the mean duration, in milliseconds, of gap periods since the beginning
       of the reception.
      */
    PUInt16b GetGapDuration();

    /**Get the most recently calculated round trip time between RTP interfaces,
       expressed in millisecond.
      */
    PUInt16b GetRoundTripDelay ();

    /**Get the most recently estimated end system delay, expressed in millisecond.
      */
    PUInt16b GetEndSystemDelay();

    /**Get the R factor for the current RTP session, expressed in the range of 0 to 100.
      */
    BYTE RFactor();

    /**Get the estimated MOS score for listening quality of the current RTP session,
       expressed in the range of 10 to 50.
       This metric not includes the effects of delay.
      */
    BYTE MOS_LQ();

    /**Get the estimated MOS score for conversational quality of the current RTP session,
       expressed in the range of 10 to 50.
       This metric includes the effects of delay.
      */
    BYTE MOS_CQ();

    // Internal functions
    void InsertExtendedReportPacket(
      unsigned sessionID,
      DWORD syncSourceOut,
      RTP_Session::JitterBufferPtr jitter, // Note do not make JitterBufferPtr a reference, needs to be a copy
      RTP_ControlFrame & report
    );

    static RTP_Session::ExtendedReportArray
    BuildExtendedReportArray(const RTP_ControlFrame & frame, PINDEX offset);


  protected:
    /**Given the following definition of states:
       state 1 = received a packet during a gap;
       state 2 = received a packet during a burst;
       state 3 = lost a packet during a burst;
       state 4 = lost a isolated packet during a gap.

       This function models the transitions of a Markov chain with the states above.
      */
    void markov(
      PacketEvent event   ///< Event triggered
    );

    /**Reset the counters used for the Markov chain
      */
    void ResetCounters();

    /**Get the R factor for the current RTP session, expressed in the range of 0 to 100.
      */
    BYTE RFactor(
      QualityType qt   ///< Listening or Conversational quality
    );

    /**Get the R factor at the end of the RTP session, expressed in the range of 0 to 100.
      */
    BYTE EndOfCallRFactor();

    /**Get the estimated MOS score for the current RTP session,
       expressed in the range of 1 to 5.
      */
    float MOS(
      QualityType qt   ///< Listening or Conversational quality
    );

    /**Get the estimated MOS score at the end of the RTP session,
       expressed in the range of 1 to 5.
      */
    float EndOfCallMOS();

    /**Get instantaneous Id factor.
      */
    float IdFactor();

    /**Get a ponderated value of Id factor.
      */
    float GetPonderateId();

    /**Get instantaneous Ieff factor.
      */
    float Ieff(
      PeriodType type   ///< The type of period (burst or gap).
    );

    /**Get a value of Ie factor at the end of the RTP session.
      */
    float GetEndOfCallIe();

    /**Get a ponderated value of Ie factor.
      */
    float GetPonderateIe();

    /**Create a a burst or gap period.
      */
    TimePeriod createTimePeriod(
      PeriodType type,        ///< The type of period (burst or gap).
      PTime beginTimestamp,   ///< Beginning of period timestamp.
      PTime endTimestamp      ///< End of period timestamp.
    );

    /**Create a period of time with an Id value associated.
      */
    IdPeriod createIdPeriod(
      PTime beginTimestamp,   ///< Beginning of period timestamp.
      PTime endTimestamp      ///< End of period timestamp.
    );

    /**Create a period of time with an Ie value associated.
      */
    IePeriod createIePeriod(
      TimePeriod timePeriod   ///< Period of time to calculate the Ie.
    );

    /* data associated with the payload */
    float    m_Ie;              /* equipment impairment factor for the codec utilized */
    float    m_Bpl;             /* robustness factor for the codec utilized */
    float    m_lookAheadTime;   /* codec lookahead time */
    PINDEX   m_payloadSize;
    unsigned m_payloadBitrate;

    DWORD m_gmin;                    /* gap threshold */
    DWORD m_lostInBurst;             /* number of lost packets within the current burst */
    DWORD m_packetsReceived;         /* packets received since the beggining of the reception */
    DWORD m_packetsSinceLastLoss;    /* packets received since the last loss or discard event */
    DWORD m_packetsLost;             /* packets lost since the beggining of the reception */
    DWORD m_packetsDiscarded;        /* packets discarded since the beggining of the receptions */
    DWORD m_srPacketsReceived;       /* count of SR packets received */

    DWORD m_packetsReceivedInGap;    /* packets received within gap periods */
    DWORD m_packetsLostInGap;        /* packets lost within gap periods */

    DWORD m_packetsReceivedInBurst;  /* packets received within burst periods */
    DWORD m_packetsLostInBurst;      /* packets lost within burst periods */

    /**Given the following definition of states:
       state 1 = received a packet during a gap;
       state 2 = received a packet during a burst;
       state 3 = lost a packet during a burst;
       state 4 = lost a isolated packet during a gap.

       Variables below correspond to state transition counts.
       To reset these counters, call the ResetCounters() function.
      */
    DWORD c5;
    DWORD c11;
    DWORD c13;
    DWORD c14;
    DWORD c22;
    DWORD c23;
    DWORD c31;
    DWORD c32;
    DWORD c33;

    /* variables to calculate round trip delay */
    PTime         m_lsrTime;
    PTimeInterval m_dlsrTime;
    PTime         m_arrivalTime;

    DWORD m_jitterDelay;  /* jitter buffer delay, in milliseconds */
    float m_lastId;       /* last Id calculated */
    float m_lastIe;       /* last Ie calculated */

    std::list<TimePeriod> m_timePeriods;
    std::list<IePeriod>   m_iePeriods;
    std::list<IdPeriod>   m_idPeriods;

    PeriodType m_currentPeriodType;           /* indicates if we are within a gap or burst */
    PTime m_periodBeginTimestamp;             /* timestamp of the beginning of the gap or burst period */
    PTime m_lastLossTimestamp;                /* timestamp of the last loss */
    PTime m_lastLossInBurstTimestamp;         /* timestamp of the last loss within a burst period */
    PTime m_lastJitterBufferChangeTimestamp;  /* timestamp of the last change in jitter buffer size */

};


#endif // OPAL_RTCP_XR

#endif // OPAL_METRICS_H


/////////////////////////////////////////////////////////////////////////////