debian-edu-config 1.702 / etc / security / pam_mount-stateless-debian-edu.conf

# Turn on if you want to debug why some volume cannot be mounted etc.
# This can be overriden by user's local configuration
# 
# Format: debug [ 1 | 0 ]
# Local user configuration can override this.

debug 1
mkmountpoint 1
# Loopback device to use to run fsck on loopback filesystems.
fsckloop /dev/loop7

# Users' local configuration file (if there is none, comment out this
# parameter). Will be read as ~/<file>
#
# Note: you must include either options_allow or options_deny to use
# this directive. I recommend also including options_require.
#
# Individual users may define additional volumes to mount if allowed
# by pam_mount.conf (usually ~/.pam_mount.conf).  The volume keyword is
# the only valid keyword in these per-user configuration files.  If the
# luserconf parameter is set in pam_mount.conf, allowing user-defined
# volume, then users may mount and unmount any volumes they specify.
# The mount operation is executed under the user account, not with
# root permissions.
# IMPORTANT: right now only smb and ncp mounts work in ~/.pam_mount.conf
# since they do not require root privileges! All other mount types
# have to be in the global configuration file.
# Please only file bugs about this if you can exactly show and prevent
# the security implications of user-specified mount commands.
#
# Format: luserconf <file>
# luserconf .pam_mount.conf

# These directives determine which options may be specified in a user config
# file (luserconf). You must include one of these directives if you have a
# luserconf directive. You may not include both directives.
#
# If you have an options_allow directive, then the options listed in that
# directive wil be allowed, and all others rejected. If you have an
# options_deny directive, then the options listed will be denied, and all others
# permitted.
#
# You may use the wildcard '*' to match all options.
#
options_allow	nosuid,nodev,loop,encryption
# options_deny	suid,dev
# options_allow	*
# options_deny	*
#
# I recommend not permitting the suid and dev options.

# The options listed in this directive are required for all volumes from a
# user config file. That is, any volume specified in a user config file that
# does not include these options will be ignored.
#
# Note: you must make sure that a required option is permitted (either by
# including it in options_allow, or by not including it in options_deny).
#
# I recommend requiring at least nosuid and nodev.
#
# This is ignored completely if the volume is configured to get its options
# and mount point from /etc/fstab.
#
options_require	nosuid,nodev

# Commands to mount/unmount volumes. They can take parameters, as shown.
#
# If you change the -p0 argument for lclmount, you'll need to modify the
# source in mount.c (it sends the password to the stdin file descriptor
# of the child process -- look for STDIN_FILENO).

lsof /usr/sbin/lsof %(MNTPT)
fsck /sbin/fsck -p %(FSCKTARGET)
losetup /sbin/losetup -p0 "%(before=\"-e\" CIPHER)" "%(before=\"-k\" KEYBITS)" %(FSCKLOOP) %(VOLUME)
unlosetup /sbin/losetup -d %(FSCKLOOP)
cifsmount /bin/mount -t cifs //%(SERVER)/%(VOLUME) %(MNTPT) -o "username=%(USER)%(before=\",\" OPTIONS)"
#smbmount /usr/bin/smbmount   //%(SERVER)/%(VOLUME) %(MNTPT) -o "username=%(USER)%(before=\",\" OPTIONS)"
smbmount /bin/mount -nt smb //%(SERVER)/%(VOLUME) %(MNTPT) -o "username=%(USER)%(before=\",\" OPTIONS)"
ncpmount /usr/bin/ncpmount   %(SERVER)/%(USER) %(MNTPT) -o "pass-fd=0,volume=%(VOLUME)%(before=\",\" OPTIONS)"
smbumount /usr/bin/smbumount %(MNTPT)
ncpumount /usr/bin/ncpumount %(MNTPT)
# Linux supports lazy unmounting (-l).  May be dangerous for encrypted volumes.
# May also break loopback mounts because loopback devices are not freed.
# Need to unmount mount point not volume to support SMB mounts, etc.
umount   /bin/umount -l %(MNTPT)
# On OpenBSD try "/usr/local/bin/mount_ehd" (included in pam_mount package).
lclmount /bin/mount -p0 %(VOLUME) %(MNTPT) "%(before=\"-o\" OPTIONS)"
cryptmount /bin/mount -t crypt "%(before=\"-o\" OPTIONS)" %(VOLUME) %(MNTPT)
nfsmount /bin/mount -n %(SERVER):%(VOLUME) %(MNTPT) "%(before=\"-o\" OPTIONS)"
# --bind may be a Linuxism.  FIXME: find BSD equivalent.
mntagain /bin/mount --bind %(PREVMNTPT) %(MNTPT)
#mntcheck /bin/mount # For BSD's (don't have /etc/mtab)
pmvarrun /usr/sbin/pmvarrun -u %(USER) -d -o %(OPERATION)

# Volumes that will be mounted when user triggers pam_mount module
# (usually at login).
#
# Format:
# volume <user> [smb|ncp|nfs|local] <server> <volume> <mount point> <mount options> <fs key cipher> <fs key path>
#
# Note that if the mount command has specified an option, eg %(KEYBITS)
# and you don't specify a value, a warning is printed in the log. The
# warning can usually be ignored, except when the option is mandatory.
#
# General examples:
#
# smb mounts require the "smbfs" Debian package
# smb mounts work also in user-specified config file ~/.pam_mount.conf
# volume user smb krueger public /home/user/krueger - - -
#
# ncp mounts require the "ncpfs" Debian package
# ncp mounts work also in user-specified config file ~/.pam_mount.conf
# volume user ncp krueger public /home/user/krueger user=user.context - -
#
# Linux encrypted home directory examples, using dm_crypt:
#
# crypt mounts require a kernel with CONFIG_BLK_DEV_DM and CONFIG_DM_CRYPT
# enabled as well as all the used ciphers (eg. CONFIG_CRYPTO_AES_586,
# CONFIG_CRYPTO_TWOFISH, etc.)
# crypt mounts require the "cryptsetup" Debian package.
# crypt mounts must be in the global config file /etc/security/pam_mount.conf
# volume user crypt - /dev/sda2 /home/user cipher=aes aes-256-ecb /home/user.key
#
# Linux encrypted home directory examples, using cryptoloop:
#
# cryptoloop mounts require a kernel with CONFIG_BLK_DEV_CRYPTOLOOP enabled
# cryptoloop mounts must be in the global config file
#  /etc/security/pam_mount.conf
# volume user local - /dev/hda123 /home/user loop,encryption=aes - -
# volume user local - /home/user.img /home/user loop,user,exec,encryption=aes,keybits=256 - -
# volume user local - /home/user.img - - - -
# volume user local - /home/user.img - - aes-256-ecb /home/user4.key
#
# The last two examples need a line like the following in
# /etc/fstab:
#
# /home/user4.img /home/user4 xfs user,loop,encryption=aes,keybits=256,noauto 0 0
#
# OpenBSD encrypted home directory example (see also lclmount above):
# volume user local - /home/user.img /home/user svnd0 - -
#
# Volatile tmpfs mount with restricted size
# (thanks to Mike Hommey for this example)
#
# volume test local - /tmpfs/test /home/test "size=10M,uid=test,gid=users,mode=0700 -t tmpfs" - -
#
# Details:
# Local user configuration (~/.pam_mount.conf) can extend this.
#
# If there are no servers, mount options, fs key ciphers, etc. you must
# supply a "-"
#
# See http://www.tldp.org/HOWTO/Loopback-Encrypted-Filesystem-HOWTO.html
# to learn how to create a encrypted loopback filesystem.
#
# If the volume's password is different than the user's login password,
# the following technique may be used (see also README):
#
# 1.  Create a file containing the volume's password (FS key).  If you are
#     using pam_mount to mount an loopback encrypted volume, this password
#     should may generated by /dev/urandom.  
#
#     Simple example: 
#     echo <volume password> | openssl enc -aes-256-ecb > /home/user.key
#     Encrypt this file using the user's login password as the key.
#
#     Verbose loopback encrypted volume example:
#     a.  dd if=/dev/urandom of=/home/user.img bs=1M count=<image size in MB>
#     b.  dd if=/dev/urandom bs=1c count=<keysize / 8> | openssl enc \
#         -<fs key cipher> > /home/user.key
#         Encrypt this file using the user's login password as the key.
#     c.  openssl enc -d -<fs key cipher> -in /home/user.key | losetup -e aes \
#         -k <keysize> -p0 /dev/loop0 /home/user.img
#     d.  mkfs -t ext2 /dev/loop0
#     e.  umount /dev/loop0
#     f.  losetup -d /dev/loop0
#
# 3.  In pam_mount.conf:
#	a.  Set the fs key cipher variable to the cipher used (ie: aes-256-ecb).
#	b.  Set the fs key path variable to the key's path (ie: /home/user.key)
# 4.  If a user changes his login password, regenerate the efsk that 
#     was created in step 1b.  A script named passwdehd is provided to do this.
#
# If fs_key_cipher is -, then the user's login password is also the volume's 
# password.

# Template (or wildcard) volumes
#
# If user is "*", "&" will be replaced by name of the user logging on in the
# volume, mount point, mount options and fs key path fields.  "~/*" will be
# replaced with "<user's homedir>/*."
#
# volume * smb krueger &     /home/&         uid=&,gid=&,dmask=0750 - -
# volume * smb krueger homes /home/&/remote  - - -
# volume * local - /home/&.img - - aes-256-ecb /etc/ehd/&

# Windows 2000, which requires a domain specified, example (thanks John Knox):
# volume * smb viper & /home/& uid=&,gid=&,dmask=0750,workgroup=WINDOWS_DOMAIN - -

# An NCP example:
# volume user ncp SERVER /USERS/Department/user /home/user user=user.full.context,uid=user,gid=user,symlinks - -
volume * nfs tjener /skole/tjener/home0 /skole/tjener/home0 nolock - - 
# volume * smb tjener shared /skole/tjener/shared - - -