/usr/share/pcb/m4/rules.inc is in pcb-common 20110918-7.
This file is owned by root:root, with mode 0o644.
The actual contents of the file can be viewed below.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 | #
# $Id$
#
# design rule definitions --
# tune design rules here
#
# revisions:
# Oct 12 2002 - Egil Kvaleberg <egil@kvaleberg.no>
# Initial version
#
# NOTE: The HOLE specification is the diameter of the finished hole.
# For through-hole plated PCBs, the actual drill dimension will be
# be larger. How much depends on process parameters
#
#
# pads for comopnents with thin pins (e.g TO92)
#
define(`rPAD1', 50)
define(`rHOLE1', 24)
#
# pads for components on 100mil pitch
# hole 2 for ICs etc
# hole 2c for headers etc. with square pins
#
# NOTE: rPAD2 should really be 62mil
#
define(`rPAD2', 60)
define(`rHOLE2', 28)
define(`rHOLE2c', 40)
#
# pads for larger transistors
#
define(`rPAD3', 80 )
define(`rHOLE3', 50)
#
# 3mm pads for mounting
# BUG: drill is bad
#
define(`rPAD4', 120)
define(`rHOLE4', 80)
#
# standard silkscreen line
# thin, fat, fatter
#
define(`rSILK', 10)
define(`rSILK2', 20)
define(`rSILK3', 30)
|