spamassassin 3.3.2-5+deb7u3 / usr / bin / sa-update

#!/usr/bin/perl -T -w

eval 'exec /usr/bin/perl -T -w -S $0 ${1+"$@"}'
    if 0; # not running under some shell

# <@LICENSE>
# Licensed to the Apache Software Foundation (ASF) under one or more
# contributor license agreements.  See the NOTICE file distributed with
# this work for additional information regarding copyright ownership.
# The ASF licenses this file to you under the Apache License, Version 2.0
# (the "License"); you may not use this file except in compliance with
# the License.  You may obtain a copy of the License at:
# 
#     http://www.apache.org/licenses/LICENSE-2.0
# 
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# </@LICENSE>

my $VERSION = 'svn' . (split(/\s+/,
	'$Id: sa-update.raw 917659 2010-03-01 19:24:41Z mmartinec $'))[2];

my $PREFIX          = '/usr';             # substituted at 'make' time
my $DEF_RULES_DIR   = '/usr/share/spamassassin';      # substituted at 'make' time
my $LOCAL_RULES_DIR = '/etc/spamassassin';    # substituted at 'make' time
my $LOCAL_STATE_DIR = '/var/lib/spamassassin';    # substituted at 'make' time
use lib '/usr/share/perl5';                   # substituted at 'make' time

# We want to do a small amount of macro processing during channel installs,
# based on the values as passed in via 'make'
my %MACRO_VALUES = (
	'VERSION'		=> '3.003002',
	'CONTACT_ADDRESS'	=> 'the administrator of that system',
	'PREFIX'		=> '/usr',
	'DEF_RULES_DIR'		=> '/usr/share/spamassassin',
	'LOCAL_RULES_DIR'	=> '/etc/spamassassin',
	'LOCAL_STATE_DIR'	=> '/var/lib/spamassassin',
	'INSTALLSITELIB'	=> '/usr/share/perl5',
);

# Standard perl modules
use Errno qw(ENOENT EACCES);
use File::Spec;
use File::Path;
use Getopt::Long;
use Pod::Usage;
use Config;
use strict;
use warnings;
use re 'taint';

BEGIN {                          # see comments in "spamassassin.raw" for doco
  my @bin = File::Spec->splitpath($0);
  my $bin = ($bin[0] ? File::Spec->catpath(@bin[0..1]) : $bin[1])
            || File::Spec->curdir;

  if (-e $bin.'/lib/Mail/SpamAssassin.pm'
        || !-e '/usr/share/perl5/Mail/SpamAssassin.pm' )
  {
    my $searchrelative;
    if ($searchrelative && $bin eq '../' && -e '../blib/lib/Mail/SpamAssassin.pm')
    {
      unshift ( @INC, '../blib/lib' );
    } else {
      foreach ( qw(lib ../lib/site_perl
                ../lib/spamassassin ../share/spamassassin/lib))
      {
        my $dir = File::Spec->catdir( $bin, split ( '/', $_ ) );
        if ( -f File::Spec->catfile( $dir, "Mail", "SpamAssassin.pm" ) )
        { unshift ( @INC, $dir ); last; }
      }
    }
  }
}

# These are the non-standard required modules
use Net::DNS;
use LWP::UserAgent;
use HTTP::Date qw(time2str);
use Archive::Tar 1.23;
use IO::Zlib 1.04;

BEGIN {
  eval { require Digest::SHA; import Digest::SHA qw(sha1_hex); 1 }
  or do { require Digest::SHA1; import Digest::SHA1 qw(sha1_hex) }
}

# These should already be available
use Mail::SpamAssassin;

# Make the main dbg() accessible in our package w/o an extra function
*dbg=\&Mail::SpamAssassin::dbg;
sub dbg;

# Clean up PATH appropriately
Mail::SpamAssassin::Util::clean_path_in_taint_mode();

##############################################################################

# Default list of GPG keys allowed to sign update releases
#
# pub   1024D/265FA05B 2003-06-09
#       Key fingerprint = 26C9 00A4 6DD4 0CD5 AD24  F6D7 DEE0 1987 265F A05B
# uid                  SpamAssassin Signing Key <release@spamassassin.org>
# sub   1024D/FC51569B 2003-08-21
#
# pub   4096R/5244EC45 2005-12-20
#       Key fingerprint = 5E54 1DC9 59CB 8BAC 7C78  DFDC 4056 A61A 5244 EC45
# uid                  updates.spamassassin.org Signing Key <release@spamassassin.org>
# sub   4096R/24F434CE 2005-12-20
#
# note for gpg newbs: these are "long" gpg keyids.  It's common to also
# use the last 8 hex digits as a shorter keyid string.
#
my %valid_GPG = ( 
  '26C900A46DD40CD5AD24F6D7DEE01987265FA05B' => 1,
  '0C2B1D7175B852C64B3CDC716C55397824F434CE' => 1,
  '5E541DC959CB8BAC7C78DFDC4056A61A5244EC45' => 1,
);

# Default list of channels to update against
#
my @channels = ( 'updates.spamassassin.org' );

my $IGNORE_MIRBY_OLDER_THAN = (24 * 60 * 60 * 7);       # 1 week

##############################################################################

use constant MIRBY_DOWNLOADED => -1;

my %opt = ();
@{$opt{'gpgkey'}} = ();
@{$opt{'channel'}} = ();
my $GPG_ENABLED = 1;

$opt{'gpghomedir'} = File::Spec->catfile($LOCAL_RULES_DIR, 'sa-update-keys');

Getopt::Long::Configure(
  qw(bundling no_getopt_compat no_auto_abbrev no_ignore_case));
GetOptions(
  'debug|D:s'                           => \$opt{'debug'},
  'version|V'                           => \$opt{'version'},
  'help|h|?'                            => \$opt{'help'},
  'verbose|v'                           => \$opt{'verbose'},
  'checkonly'                           => \$opt{'checkonly'},
  'allowplugins'                        => \$opt{'allowplugins'},
  'refreshmirrors'                      => \$opt{'refreshmirrors'},

  # allow multiple of these on the commandline
  'gpgkey=s'				=> $opt{'gpgkey'},
  'gpghomedir=s'			=> \$opt{'gpghomedir'},
  'channel=s'				=> $opt{'channel'},

  'install=s'                           => \$opt{'install'},
  'import=s'			        => \$opt{'import'},
  'gpgkeyfile=s'			=> \$opt{'gpgkeyfile'},
  'channelfile=s'			=> \$opt{'channelfile'},
  'updatedir=s'				=> \$opt{'updatedir'},
  'gpg!'				=> \$GPG_ENABLED,

  # backward compatibility
  'usegpg'				=> \$GPG_ENABLED,
) or print_usage_and_exit();

if ( defined $opt{'help'} ) {               
  print_usage_and_exit("For more information read the sa-update man page.\n", 0);
} 
if ( defined $opt{'version'} ) {            
  print_version();
  exit(0);
}


# Figure out what version of SpamAssassin we're using, and also figure out the
# reverse of it for the DNS query.  Handle x.yyyzzz as well as x.yz.
my $SAVersion = $Mail::SpamAssassin::VERSION;
if ($SAVersion =~ /^(\d+)\.(\d{3})(\d{3})$/) {
  $SAVersion = join(".", $1+0, $2+0, $3+0);
}
elsif ($SAVersion =~ /^(\d)\.(\d)(\d)$/) {
  $SAVersion = "$1.$2.$3";
}
else {
  die "fatal: SpamAssassin version number '$SAVersion' is in an unknown format!\n";
}
my $RevSAVersion = join(".", reverse split(/\./, $SAVersion));

  
# set debug areas, if any specified (only useful for command-line tools)
$SAVersion =~ /^(\d+\.\d+)/;
if ($1+0 > 3.0) {
  $opt{'debug'} ||= 'all' if (defined $opt{'debug'});
}
else {
  $opt{'debug'} = defined $opt{'debug'};
}


# Find the default site rule directory, also setup debugging and other M::SA bits
my $SA = new Mail::SpamAssassin({
  debug => $opt{'debug'},
  local_tests_only => 1,
  dont_copy_prefs => 1,

  PREFIX          => $PREFIX,
  DEF_RULES_DIR   => $DEF_RULES_DIR,
  LOCAL_RULES_DIR => $LOCAL_RULES_DIR,
  LOCAL_STATE_DIR => $LOCAL_STATE_DIR,
});

if (defined $opt{'updatedir'}) {
  $opt{'updatedir'} = Mail::SpamAssassin::Util::untaint_file_path($opt{'updatedir'});
}
else {
  $opt{'updatedir'} = $SA->sed_path('__local_state_dir__/__version__');
}

dbg("generic: sa-update version $VERSION");
dbg("generic: using update directory: $opt{'updatedir'}");

# doesn't really display useful things for this script, but we do want
# a module/version listing, etc. sa-update may be used for older versions
# of SA that don't include this function, so eval around it.
eval { $SA->debug_diagnostics(); 1; };

$SA->finish();

# untaint the command-line args; since the root user supplied these, and
# we're not a setuid script, we trust them
foreach my $optkey (keys %opt) {
  next if ref $opt{$optkey};
  Mail::SpamAssassin::Util::untaint_var(\$opt{$optkey});
}

##############################################################################

# Deal with gpg-related options

if (@{$opt{'gpgkey'}}) {
  $GPG_ENABLED = 1;
  foreach my $key (@{$opt{'gpgkey'}}) {
    unless (is_valid_gpg_key_id($key)) {
      dbg("gpg: invalid gpgkey parameter $key");
      next;
    }
    $key = uc $key;
    dbg("gpg: adding key id $key");
    $valid_GPG{$key} = 1;
  }
}

if (defined $opt{'gpgkeyfile'}) {
  $GPG_ENABLED = 1;
  unless (open(GPG, $opt{'gpgkeyfile'})) {
    die "Can't open ".$opt{'gpgkeyfile'}." for reading: $!\n";
  }

  dbg("gpg: reading in gpgfile ".$opt{'gpgkeyfile'});
  while(my $key = <GPG>) {
    chomp $key;

    $key =~ s/#.*$//;   # remove comments
    $key =~ s/^\s+//;   # remove leading whitespace
    $key =~ s/\s+$//;   # remove tailing whitespace
    next unless ($key); # skip empty lines

    unless (is_valid_gpg_key_id($key)) {
      dbg("gpg: invalid key id $key");
      next;
    }
    $key = uc $key;
    dbg("gpg: adding key id $key");
    $valid_GPG{$key} = 1;
  }
  close(GPG);
}

# At this point, we need to know where GPG is ...
my $GPGPath;
if ($GPG_ENABLED || $opt{'import'}) {
  # find GPG in the PATH
  # bug 4958: for *NIX it's "gpg", in Windows it's "gpg.exe"
  $GPGPath = 'gpg' . $Config{_exe};
  dbg("gpg: Searching for '$GPGPath'");

  if ($GPGPath = Mail::SpamAssassin::Util::find_executable_in_env_path($GPGPath)) {
    dbg("gpg: found $GPGPath");

    # bug 5030: if GPGPath has a space, put it in quotes
    if ($GPGPath =~ / /) {
      $GPGPath =~ s/"/\\"/g;
      $GPGPath = qq/"$GPGPath"/;
      dbg("gpg: path changed to $GPGPath");
    }
  }
  else {
    die "error: gpg required but not found!\n";
  }

  # GPG was found, and we've been asked to import a key only
  if ( $opt{'import'} ) {
    my $ex = import_gpg_key($opt{'import'});
    exit $ex;
  }

  # does the sa-update keyring exist?  if not, import it
  if(!-f File::Spec->catfile($opt{'gpghomedir'}, "secring.gpg")) {
    import_default_keyring();
    # attempt to continue even if this fails, anyway
  }

  # specify which keys are trusted
  dbg("gpg: release trusted key id list: ".join(" ", keys %valid_GPG));

  # convert fingerprint gpg ids to keyids
  foreach (keys %valid_GPG) {
    my $id = substr $_, -8;
    $valid_GPG{$id} = 1;
  }
}

##############################################################################

# Deal with channel-related options
if (defined $opt{'channel'} && scalar @{$opt{'channel'}} > 0) {
  @channels = @{$opt{'channel'}};
}
if (defined $opt{'channelfile'}) {
  unless (open(CHAN, $opt{'channelfile'})) {
    die "Can't open ".$opt{'channelfile'}." for reading: $!\n";
  }

  dbg("channel: reading in channelfile ".$opt{'channelfile'});
  @channels = ();
  while(my $chan = <CHAN>) {
    chomp $chan;

    $chan =~ s/#.*$//;   # remove comments
    $chan =~ s/^\s+//;   # remove leading whitespace
    $chan =~ s/\s+$//;   # remove tailing whitespace
    next unless ($chan); # skip empty lines

    $chan = lc $chan;
    dbg("channel: adding $chan");
    push(@channels, $chan);
  }
  close(CHAN);
}

# untaint the channel listing
for(my $ind = 0; $ind < @channels; $ind++) {
  local($1); # bug 5061: prevent random taint flagging of $1
  if ($channels[$ind] =~ /^([a-zA-Z0-9._-]+)$/) {
    Mail::SpamAssassin::Util::untaint_var(\$channels[$ind]);
  }
  else {
    dbg("channel: skipping invalid channel: $channels[$ind]");
    splice @channels, $ind, 1;
    $ind--; # the next element takes the place of the deleted one
  }
}

my ($res, $ua);

if ($opt{'install'}) {
  if (scalar @channels > 1) {
    die "fatal: --install cannot be used with multiple --channel switches.\n";
  }

} else {
  $res = Net::DNS::Resolver->new();

  $ua = LWP::UserAgent->new();
  $ua->agent("sa-update/$VERSION/$SAVersion");
  $ua->timeout(60);      # a good long timeout; 10 is too short for Coral!
  $ua->env_proxy;
}

# Generate a temporary file to put channel content in for later use ...
my ($content_file, $tfh) = Mail::SpamAssassin::Util::secure_tmpfile();
if ( !defined $content_file ) {
  die "fatal: could not create temporary channel content file: $!\n";
}
close($tfh);

# by default, exit code is 1, to indicate no updates occurred
my $exit = 1;

# Use a temporary directory for all update channels
my $UPDTmp;

# we only need to lint the site pre files once
my $site_pre_linted = 0;

# Go ahead and loop through all of the channels
foreach my $channel (@channels) {
  dbg("channel: attempting channel $channel");

  # Convert the channel to a nice-for-filesystem version
  my $nicechannel = $channel;
  $nicechannel =~ tr/A-Za-z0-9-/_/cs;

  my $UPDDir = File::Spec->catfile($opt{'updatedir'}, $nicechannel);
  my $CFFile = "$UPDDir.cf";
  my $PREFile = "$UPDDir.pre";

  dbg("channel: update directory $UPDDir");
  dbg("channel: channel cf file $CFFile");
  dbg("channel: channel pre file $PREFile");

  my $instfile;
  if ($opt{'install'}) {
    $instfile = $opt{'install'};
    dbg("channel: installing from file $instfile");
  }

  my($mirby, $mirby_time);
  my $mirby_path = File::Spec->catfile($UPDDir, "MIRRORED.BY");

  # try to read metadata from channel.cf file
  my $currentV = -1;
  if (open(CF, $CFFile)) {
    while(<CF>) {
      local($1,$2);
      last unless /^# UPDATE\s+([A-Za-z]+)\s+(\S+)/;
      my($type, $value) = (lc $1,$2);

      dbg("channel: metadata $type = $value");

      if ($type eq 'version') {
        $value =~ /^(\d+)/;
        $currentV = $1;
      }
    }
    close(CF);
  }

  my $newV;
  if (!$instfile) {
    # Setup the channel version DNS query
    my $DNSQ = "$RevSAVersion.$channel";

    my $dnsV = join(' ', do_txt_query($DNSQ));
    local($1);
    if (defined $dnsV && $dnsV =~ /^(\d+)/) {
      $newV = $1 if (!defined $newV || $1 > $newV);
      dbg("dns: $DNSQ => $dnsV, parsed as $1");
    }

    # Not getting a response isn't a failure, there may just not be any updates
    # for this SA version yet.
    if (!defined $newV) {
      my @mirs = do_txt_query("mirrors.$channel");
      if (defined shift @mirs) {
        dbg("channel: no updates available, skipping channel");
      } else {
        channel_failed("channel: no 'mirrors.$channel' record found");
      }
      next;
    }

    # If this channel hasn't been installed before, or it's out of date,
    # keep going.  Otherwise, skip it.
    if ($currentV >= $newV) {
      dbg("channel: current version is $currentV, new version is $newV, skipping channel");
      next;
    }

    print "Update available for channel $channel\n"  if $opt{'verbose'};

    # If we are only checking for update availability, exit now
    if ( defined $opt{'checkonly'} ) {            
      dbg("channel: $channel: update available, not downloading in checkonly mode");
      $exit = 0;
      next;
    }

  } else {  # $instfile
    # the /.*/ ensures we use the 3-digit string nearest to the end of string, otherwise
    # we might pick up something from the middle of the directory path
    local($1);
    if ($instfile !~ /(?:.*\D|^)(\d{3,})/) {        
      # this is a requirement
      die "channel: $channel: --install file $instfile does not contain a 3-digit version number!\n";
    }
    $newV = $1;

#   print "Update available for channel $channel\n"  if $opt{'verbose'};

    if ( defined $opt{'checkonly'} ) {            
      dbg("channel: $channel: --install and --checkonly, claiming update available");
      $exit = 0;
      next;
    }
  }

  # we need a directory we control that we can use to aviod loading any rules
  # when we lint the site pre files, we might as well use the channel temp dir
  dbg("channel: preparing temp directory for new channel");
  if (!$UPDTmp) {
    $UPDTmp = Mail::SpamAssassin::Util::secure_tmpdir();
    dbg("generic: update tmp directory $UPDTmp");
  }
  elsif (!clean_update_dir($UPDTmp)) {
    die "channel: attempt to clean update dir failed, aborting";
  }

  # lint the site pre files (that will be used when lint checking the channel)
  # before downloading the channel update
  unless ($site_pre_linted) {
    dbg("generic: lint checking site pre files once before attempting channel updates");
    unless (lint_check_dir(File::Spec->catfile($UPDTmp, "doesnotexist"))) {
      dbg("generic: lint of site pre files failed, cannot continue"); 
      print "Lint of site pre files failed, cannot continue\n"  if $opt{'verbose'};
      $exit = 2;
      last;
    }
    dbg("generic: lint check of site pre files succeeded, continuing with channel updates");
    $site_pre_linted = 1;
  }

  my $content;
  my $SHA1;
  my $GPG;
  if (!$instfile) {
    # Read in the MIRRORED.BY file if it exists
    if (open(MIRBY, $mirby_path)) {
      $mirby_time = (stat $mirby_path)[9];

      if ($opt{'refreshmirrors'}) {
        dbg("channel: --refreshmirrors used, forcing refresh");
        $mirby = $mirby_time = undef;
      } elsif (time - $mirby_time > $IGNORE_MIRBY_OLDER_THAN) {
        dbg("channel: MIRRORED.BY file is too old, forcing refresh");
        $mirby = $mirby_time = undef;
      }
      else {
        local $/ = undef;
        $mirby = <MIRBY>;
      }
      close(MIRBY);
    }

    if (!defined $mirby) {
      # We don't currently have the list of mirrors, so go grab it.
      dbg("channel: no MIRRORED.BY file available");
      my @mirrors = do_txt_query("mirrors.$channel");
      unless (@mirrors) {
        warn "error: no mirror data available for channel $channel\n";
        channel_failed("channel: MIRRORED.BY file location was not in DNS");
        next;
      }
      foreach my $mirror (@mirrors) {
        $mirby = http_get($mirror);
        unless ($mirby) {
          dbg("channel: no mirror data available for channel $channel from $mirror");
          next;
        }
        last;
      }
      unless ($mirby) {
        warn "error: no mirror data available for channel $channel\n";
        channel_failed("channel: MIRRORED.BY contents were missing");
        next;
      }
      $mirby_time = MIRBY_DOWNLOADED;

      dbg("channel: MIRRORED.BY file retrieved");
    }

    # Read in the list of mirrors
    dbg("channel: reading MIRRORED.BY file");
    my %mirrors = ();
    my @mirrors = split(/^/, $mirby);
    while(my $mirror = shift @mirrors) {
      chomp $mirror;

      $mirror =~ s/#.*$//;   # remove comments
      $mirror =~ s/^\s+//;   # remove leading whitespace
      $mirror =~ s/\s+$//;   # remove tailing whitespace
      next unless ($mirror); # skip empty lines

      # We only support HTTP right now
      if ($mirror !~ m@^http://@i) {
        dbg("channel: skipping non-HTTP mirror: $mirror");
        next;
      }

      my @data;

      dbg("channel: found mirror $mirror");

      ($mirror,@data) = split(/\s+/, $mirror);
      $mirror =~ s@/+$@@; # http://example.com/updates/ -> .../updates
      $mirrors{$mirror}->{weight} = 1;
      foreach (@data) {
        my($k,$v) = split(/=/, $_, 2);
        $mirrors{$mirror}->{$k} = $v;
      }
    }

    unless (keys %mirrors) {
      warn "error: no mirrors available for channel $channel\n";
      channel_failed("channel: no mirrors available");
      next;
    }

    # Now that we've laid the foundation, go grab the appropriate files
    #

    # Loop through all available mirrors, choose from them randomly
    # if the archive get fails, choose another mirror,
    # if the get for the sha1 or gpg signature files, the channel fails
    while (my $mirror = choose_mirror(\%mirrors)) {
      # Grab the data hash for this mirror, then remove it from the list
      my $mirror_info = $mirrors{$mirror};
      delete $mirrors{$mirror};

      dbg("channel: selected mirror $mirror");

      # Actual archive file
      $content = http_get("$mirror/$newV.tar.gz");
      next unless $content;

      # SHA1 of the archive file
      $SHA1 = http_get("$mirror/$newV.tar.gz.sha1");
      last unless $SHA1;

      # if GPG is enabled, the GPG detached signature of the archive file
      if ($GPG_ENABLED) {
        $GPG = http_get("$mirror/$newV.tar.gz.asc");
        last unless $GPG;
      }

      # try to update our list of mirrors.
      # a failure here doesn't cause channel failure.
      if ($mirby_time != MIRBY_DOWNLOADED) {
        my $mirby_tmp = http_get("$mirror/MIRRORED.BY", $mirby_time);
        if ($mirby_tmp) {
          $mirby = $mirby_tmp;
          $mirby_time = MIRBY_DOWNLOADED;
        }
      }

      last;
    }

  } else {      # $instfile
    dbg("channel: using --install files $instfile\{,.sha1,.asc\}");
    $content = read_install_file($instfile);
    $SHA1 = read_install_file($instfile.".sha1");
    $GPG = read_install_file($instfile.".asc") if $GPG_ENABLED;
  }

  unless ($content && $SHA1 && (!$GPG_ENABLED || $GPG)) {
    channel_failed("channel: could not find working mirror");
    next;
  }

  # Validate the SHA1 signature before going forward with more complicated
  # operations.
  # The SHA1 file may be "signature filename" ala sha1sum, just use the signature
  { local($1);
    $SHA1 =~ /^([a-fA-F0-9]{40})/;
    $SHA1 = $1 || 'INVALID';
  }
  my $digest = sha1_hex($content);
  dbg("sha1: verification wanted: $SHA1");
  dbg("sha1: verification result: $digest");
  unless ($digest eq $SHA1) {
    channel_failed("channel: SHA1 verification failed");
    next;
  }

  # Write the content out to a temp file for GPG/Archive::Tar interaction
  dbg("channel: populating temp content file");
  open(TMP, ">$content_file") || die "fatal: can't write to content temp file $content_file: $!\n";
  binmode TMP;
  print TMP $content;
  close(TMP);

  # to sign  : gpg -bas file
  # to verify: gpg --verify --batch --no-tty --status-fd=1 -q --logger-fd=1 file.asc file
  # look for : [GNUPG:] GOODSIG 6C55397824F434CE updates.spamassassin.org [...]
  #            [GNUPG:] VALIDSIG 0C2B1D7175B852C64B3CDC716C55397824F434CE [...]
  #            [GNUPG:] NO_PUBKEY 6C55397824F434CE
  if ($GPG) {
    dbg("gpg: populating temp signature file");
    my $sig_file;
    ($sig_file, $tfh) = Mail::SpamAssassin::Util::secure_tmpfile();
    if ( !defined $sig_file ) {
      die "fatal: couldn't create temp file for GPG signature: $!\n";
    }
    binmode $tfh;
    print $tfh $GPG;
    close($tfh);

    dbg("gpg: calling gpg");

    my $gpghome = interpolate_gpghomedir();

    # TODO: we could also use "--keyserver pgp.mit.edu" or similar,
    # to autodownload missing keys...
    my $CMD = "$GPGPath $gpghome --verify --batch ".
        "--no-tty --status-fd=1 -q --logger-fd=1";

    unless (open(CMD, "$CMD $sig_file $content_file|")) {
      unlink $sig_file || warn "error: can't unlink $sig_file: $!\n";
      die "fatal: couldn't execute $GPGPath: $!\n";
    }

    # Determine the fate of the signature
    my $signer = '';
    my $missingkeys = '';
    while(my $GNUPG = <CMD>) {
      chop $GNUPG;
      dbg ("gpg: $GNUPG");

      if ($GNUPG =~ /^gpg: fatal:/) {
        warn $GNUPG."\n";        # report bad news
      }

      local($1);
      if ($GNUPG =~ /^\Q[GNUPG:]\E NO_PUBKEY \S+(\S{8})$/) {
        $missingkeys .= $1." ";
      }

      next unless ($GNUPG =~ /^\Q[GNUPG:]\E (?:VALID|GOOD)SIG (\S{8,40})/);
      my $key = $1;

      # we want either a keyid (8) or a fingerprint (40)
      if (length $key > 8 && length $key < 40) {
        substr($key, 8) = '';
      }

      # use the longest match we can find
      $signer = $key if (length $key > length $signer);
    }

    close(CMD);
    unlink $sig_file || warn "Can't unlink $sig_file: $!\n";

    if ($signer) {
      my $keyid = substr $signer, -8;
      dbg("gpg: found signature made by key $signer");
      if (exists $valid_GPG{$signer}) {
	dbg("gpg: key id $signer is release trusted");
      }
      elsif (exists $valid_GPG{$keyid}) {
	dbg("gpg: key id $keyid is release trusted");
      }
      else {
	dbg("gpg: key id $keyid is not release trusted");
	$signer = undef;
      }
    }

    unless ($signer) {
      warn "error: GPG validation failed!\n";

      if ($missingkeys) {

        warn <<ENDOFVALIDATIONERR;
The update downloaded successfully, but it was not signed with a trusted GPG
key.  Instead, it was signed with the following keys:

    $missingkeys

Perhaps you need to import the channel's GPG key?  For example:

    wget http://spamassassin.apache.org/updates/GPG.KEY
    sa-update --import GPG.KEY

ENDOFVALIDATIONERR

      } else {

        warn <<ENDOFVALIDATIONERR;
The update downloaded successfully, but the GPG signature verification
failed.
ENDOFVALIDATIONERR

      }

      channel_failed("channel: GPG validation failed");
      next;
    }
  }

  # OK, we're all validated at this point, install the new version
  dbg("channel: file verification passed, testing update");

  dbg("channel: extracting archive");
  if (!taint_safe_archive_extract($UPDTmp, $content_file)) {
    channel_failed("channel: archive extraction failed");
    next;
  }

  # check --lint

  if (!lint_check_dir($UPDTmp)) {
    channel_failed("channel: lint check of update failed");
    next;
  }

  dbg("channel: lint check succeeded, extracting archive to $UPDDir...");

  my @totry = (
    {
      'try' => sub {
        if (-d $UPDDir) {
          # ok that worked, too late to stop now!   At this stage, if there are
          # errors, we have to attempt to carry on regardless, since we've already
          # blown away the old ruleset.
          dbg("channel: point of no return for existing $UPDDir");

          # clean out the previous channel files, if they exist
          if (-f $PREFile && ! unlink $PREFile ) {
            warn("channel: attempt to rm channel pre file failed, attempting to continue anyway");
          }
          if (-f $CFFile && ! unlink $CFFile ) {
            warn("channel: attempt to rm channel cf file failed, attempting to continue anyway");
          }
          if (!clean_update_dir($UPDDir)) {
            warn("channel: attempt to rm channel directory failed, attempting to continue anyway");
          }
        }
        else {
          # create the dir, if it doesn't exist
          dbg("channel: creating $UPDDir");
          if (!mkpath([$UPDDir], 0, 0777)) {
            warn "channel: can't create channel directory $UPDDir: $!\n";
	    return 0;
          }

          # ok, that test worked.  it's now likely that the .cf's will
          # similarly be ok to rename, too.   Too late to stop from here on
          dbg("channel: point of no return for new $UPDDir");
        }

	return 1;
      },

      'rollback' => sub {
	dbg("channel: attempting to remove the channel and update directories");

        # bug 4941: try to get rid of the empty directories to avoid leaving SA
        # with no rules.
        rmdir $UPDDir;
        rmdir $opt{'updatedir'};
      },
    },

    {
      'try' => sub {
        # extract the files again for the last time
        if (!taint_safe_archive_extract($UPDDir, $content_file)) {
          channel_failed("channel: archive extraction failed");
	  return 0;
        }

	return 1;
      },

      'rollback' => sub {
	dbg("channel: attempting to clean out the channel update directory");

        # bug 4941: try to get rid of the empty directories to avoid leaving SA
        # with no rules.
        if (!clean_update_dir($UPDDir)) {
          warn "channel: attempt to clean up failed extraction also failed!\n";
        }
      },
    },

    {
      'try' => sub {
        if ($instfile) {
          dbg("channel: not creating MIRRORED.BY file due to --install");
          return 1;
        }

        # Write out the mirby file, not fatal if it doesn't work
        dbg("channel: creating MIRRORED.BY file");
        if (open(MBY, ">$mirby_path")) {
          print MBY $mirby;
          close(MBY);
        }
        else {
          warn "error: can't write new MIRRORED.BY file: $!\n";
        }

	return 1;
      },

      'rollback' => sub {
      },
    },

    {
      'try' => sub {
        # the last step is to create the .cf and .pre files to include the
        # channel files
        my @CF = ();
        my @PRE = ();

        dbg("channel: creating update cf/pre files");

        # Put in whatever metadata we need
        push(@CF, "# UPDATE version $newV\n");


        # Find all of the cf and pre files
        unless (opendir(DIR, $UPDDir)) {
          die "fatal: can't access $UPDDir: $!\n";
        }

        my @files = ();
        while(my $file = readdir(DIR)) {
	  next if $file eq '.' || $file eq '..';
          Mail::SpamAssassin::Util::untaint_var(\$file);
          my $path = File::Spec->catfile($UPDDir, $file);
          next unless (-f $path);   # shouldn't ever happen
          push(@files, $file);
        }

        # bug 5371: ensure files are sorted
        foreach my $file ( sort @files ) {
          if ($file =~ /\.cf$/) {
            push(@CF, "include $nicechannel/$file\n");
          }
          elsif ($file =~ /\.pre$/) {
            push(@PRE, "include $nicechannel/$file\n");
          }
          else {
            next;
          }

          dbg("channel: adding $file");
        }
        closedir(DIR);

        # Finally, write out the files to include the update files
        if (!write_channel_file($PREFile, \@PRE)) {
          channel_failed("channel: writing of $PREFile failed");
          return 0;
        }
        if (!write_channel_file($CFFile, \@CF)) {
          channel_failed("channel: writing of $CFFile failed");
          return 0;
        }

        $exit = 0;            # "exit 0" means an update occurred
        dbg("channel: update complete");

	return 1;
      },

      'rollback' => sub {
      },
    },

  );

  my $error;
  for(my $elem = 0; $elem <= $#totry; $elem++) {
    if (!&{$totry[$elem]->{'try'}}()) {
      $error = $elem;
      last;
    }
  }
  if (defined $error) {
    dbg("channel: channel failed, attempting rollback");
    for(my $elem = $error; $elem >= 0; $elem--) {
      &{$totry[$elem]->{'rollback'}}();
    }
  }
}

##############################################################################

# clean out the temp dir
if ($UPDTmp) {
  dbg("generic: cleaning up temporary directory/files");
  if (!clean_update_dir($UPDTmp)) {
    warn "error: unable to clean out the files in $UPDTmp\n";
  }
}

# clear out the temp files if they still exist
foreach ( $content_file, $UPDTmp ) {
  next unless defined $_;
  my $stat_errn = stat($_) ? 0 : 0+$!;
  next if $stat_errn == ENOENT;

  if ($stat_errn != 0) {
    warn "error: can't access $_: $!\n";
  }
  elsif (-d _) {
    rmdir $_ || warn "error: can't remove directory $_: $!\n";
  }
  elsif (-f _) {
    unlink $_ || warn "error: can't remove file $_: $!\n";
  }
  else {
    warn "error: '$_' isn't a file nor a directory, skipping\n";
  }
}

dbg("diag: updates complete, exiting with code $exit");

if ($opt{'verbose'}) {
  if (!$exit) {
    if (defined $opt{'checkonly'}) {
      print "Update was available, but not installed in checkonly mode\n";
    } else {
      print "Update was available, and was downloaded and installed successfully\n";
    }
  } elsif ($exit == 1) {
    print "Update finished, no fresh updates were available\n";
  } else {
    print "Update failed, exiting with code $exit\n";
  }
}

exit $exit;

##############################################################################

sub read_install_file {
  my ($file) = @_;
  open (IN, "<$file") or die "cannot open $file\n";
  my $all = join('', <IN>);
  close IN;
  return $all;
}

##############################################################################

sub write_channel_file {
  my ($filename, $contents) = @_;

  return 1 unless @{$contents};

  if (open(FILE, ">$filename")) {
    print FILE @{$contents};
    close FILE or return 0;
    return 1;
  }

  return 0;
}

##############################################################################

sub channel_failed {
  my $reason = shift;
  warn("$reason, channel failed\n");
  if ($exit > 4) {
    $exit++;
  } else {
    $exit = 4;      # 4 or higher means channel failed
  }
}

##############################################################################

sub taint_safe_archive_extract {
  my $todir = shift;
  my $input = shift;

  my $tfh = IO::Zlib->new($input, "rb");
  die "fatal: couldn't read content tmpfile $content_file: $!\n" unless $tfh;

  my $tar = Archive::Tar->new($tfh);
  die "fatal: couldn't create Archive::Tar object!\n" unless $tar;

  # stupid Archive::Tar is not natively taint-safe! duh.
  # return $tar->extract();
  # instead, get the file list, untaint, and extract one-by-one.

  my @files = $tar->list_files();
  foreach my $file (@files) {
    next if ($file =~ /^\/$/);  # ignore dirs

    local($1);
    $file =~ /^([-\.\,\/a-zA-Z0-9_]+)$/;
    my $outfname = $1;
    $outfname =~ s/\.\.\//__\//gs;      # avoid "../" dir traversal attacks
    $outfname = File::Spec->catfile($todir, $outfname);

    dbg "extracting: $outfname";
    if (open OUT, ">".$outfname) {
      my $content = $tar->get_content($file);

      if ($outfname =~ /\.(?:pre|cf)$/) {
        # replace macros in the update files if it's a .pre or .cf
        local($1);
        $content =~ s/\@\@([^\@]+)\@\@/$MACRO_VALUES{$1} || "\@\@$1\@\@"/ge;

        # also, if --allowplugins is not specified, comment out
        # all loadplugin or tryplugin lines
        if ( !$opt{'allowplugins'} ) {
          $content =~ s{^\s*((?:load|try)plugin|bayes_store_module|auto_whitelist_factory)\b}
            {#(commented by sa-update, no --allowplugins switch specified)# $1}gmx;
        }
      }

      print OUT $content;
      if (!close OUT) {
        warn "error: write failed to $outfname: $!";
        goto failed;
      }
    } else {
      warn "error: failed to open $outfname for write: $!";
      goto failed;
    }
  }

  return @files;

failed:
  return;       # undef = failure
}

##############################################################################

# Do a generic TXT query
sub do_txt_query {
  my($query) = shift;

  my $RR = $res->query($query, 'TXT');
  my @result;

  if ($RR) {
    foreach my $rr ($RR->answer) {
      my $text = $rr->rdatastr;
      local($1);
      $text =~ /^"(.*)"$/;
      push @result, $1;
    }
  }
  else {
    dbg("dns: query failed: $query => " . $res->errorstring);
  }

  return @result;
}

##############################################################################

# Do a GET request via HTTP for a certain URL
# Use the optional time_t value to do an IMS GET
sub http_get {
  my($url, $ims) = @_;

  my $response;
  my $text;

  # retry 3 times; this works better with Coral
  foreach my $retries (1 .. 3) {
    my $request = HTTP::Request->new("GET");
    $request->url($url);

    if (defined $ims) {
      my $str = time2str($ims);
      $request->header('If-Modified-Since', $str);
      dbg("http: IMS GET request, $url, $str");
    }
    else {
      dbg("http: GET request, $url");
    }

    $response = $ua->request($request);

    if ($response->is_success) {
      return $response->content;
    }

    # could be a "304 not modified" or similar.
    # TODO: should use a special return type for "not modified" here
    # instead of overloading the failure return type
    if ($ims && $response->status_line =~ /^3/) {
      return;
    }

    # include the text in the debug output; it's useful in some cases,
    # e.g. proxies that require authentication, diagnosing fascist
    # filtering false positives, etc.
    $text = $response->content;
    $text ||= "(no body)";
    $text =~ s/\s+/ /gs;

    dbg ("http: GET $url request failed, retrying: " .
                    $response->status_line.": ".$text);
  }

  # this should be a user-readable warning without --debug
  warn "http: GET $url request failed: " .
                    $response->status_line.": ".$text."\n";
  return;
}

##############################################################################

# choose a random integer between 0 and the total weight of all mirrors
# loop through the mirrors from largest to smallest weight
# if random number is < largest weight, use it
# otherwise, random number -= largest, remove mirror from list, try again
# eventually, there'll just be 1 mirror left in $mirrors[0] and it'll be used
# 
sub choose_mirror {
  my($mirror_list) = @_;

  # Sort the mirror list by reverse weight (largest first)
  my @mirrors = sort { $mirror_list->{$b}->{weight} <=> $mirror_list->{$a}->{weight} } keys %{$mirror_list};

  return unless @mirrors;

  if (keys %{$mirror_list} > 1) {
    # Figure out the total weight
    my $weight_total = 0;
    foreach (@mirrors) {
      $weight_total += $mirror_list->{$_}->{weight};
    }

    # Pick a random int
    my $value = int(rand($weight_total));

    # loop until we find the right mirror, or there's only 1 left
    while (@mirrors > 1) {
      if ($value < $mirror_list->{$mirrors[0]}->{weight}) {
        last;
      }
      $value -= $mirror_list->{$mirrors[0]}->{weight};
      shift @mirrors;
    }
  }

  return $mirrors[0];
}

##############################################################################

sub print_version {
  print "sa-update version $VERSION\n"
      . "  running on Perl version " . join(".", map { $_||=0; $_*1 } ($] =~ /(\d)\.(\d{3})(\d{3})?/ )) . "\n";
}

##############################################################################

sub print_usage_and_exit {
  my ( $message, $exitval ) = @_;
  $exitval ||= 64;
  
  if ($exitval == 0) {
    print_version();
    print("\n");
  }
  pod2usage(
    -verbose => 0,
    -message => $message,
    -exitval => $exitval,
  );
}

##############################################################################

sub usage {
  my ( $verbose, $message ) = @_;
  print "sa-update version $VERSION\n";
  pod2usage( -verbose => $verbose, -message => $message, -exitval => 64 );
}

##############################################################################

sub interpolate_gpghomedir {
  my $gpghome = '';
  if ($opt{'gpghomedir'}) {
    $gpghome = $opt{'gpghomedir'};
    if (Mail::SpamAssassin::Util::am_running_on_windows()) {
      # windows is single-quote-phobic; bug 4958 cmt 7
      $gpghome =~ s/\"/\\\"/gs;
      $gpghome = "--homedir=\"$gpghome\"";
    } else {
      $gpghome =~ s/\'/\\\'/gs;
      $gpghome = "--homedir='$gpghome'";
    }
  }
  return $gpghome;
}

##############################################################################

sub import_gpg_key {
  my $keyfile = shift;

  my $gpghome = interpolate_gpghomedir();

  my $CMD = "$GPGPath $gpghome --batch ".
      "--no-tty --status-fd=1 -q --logger-fd=1 --import";

  unless (open(CMD, "$CMD $keyfile|")) {
    die "fatal: couldn't execute $GPGPath: $!\n";
  }

  # Determine the fate of the signature
  while(my $GNUPG = <CMD>) {
    chop $GNUPG;
    dbg ("gpg: $GNUPG");

    if ($GNUPG =~ /^gpg: /) {
      warn $GNUPG."\n";        # report bad news
    }

    if ($GNUPG =~ /^IMPORTED /) {
      dbg("gpg: gpg key imported successfully");
    }
  }

  close(CMD);
  return ($? >> 8);
}

##############################################################################

sub import_default_keyring {
  my $defkey = File::Spec->catfile ($DEF_RULES_DIR, "sa-update-pubkey.txt");
  unless (-f $defkey) {
    dbg("gpg: import of default keyring failed, couldn't find sa-update-pubkey.txt");
    return;
  }

  dbg("gpg: importing default keyring to ".$opt{gpghomedir});
  unless (-d $opt{gpghomedir}) {
    # use 0700 to avoid "unsafe permissions" warning
    mkpath([$opt{'gpghomedir'}], 0, 0700) or die "cannot mkpath $opt{gpghomedir}: $!";
  } 
  import_gpg_key($defkey);
}

##############################################################################

sub is_valid_gpg_key_id {
  # either a keyid (8 bytes) or a fingerprint (40 bytes)
  return ($_[0] =~ /^[a-fA-F0-9]+$/ && (length $_[0] == 8 || length $_[0] == 40));
}

##############################################################################

sub clean_update_dir {
  my $dir = shift;

  unless (opendir(DIR, $dir)) {
    warn "error: can't opendir $dir: $!\n";
    dbg("generic: attempt to opendir ($dir) failed");
    return;
  }
  while(my $file = readdir(DIR)) {
    next if $file eq '.' || $file eq '..';
    Mail::SpamAssassin::Util::untaint_var(\$file);

    my $path = File::Spec->catfile($dir, $file);
    next unless (-f $path);

    dbg("generic: unlinking $file");
    if (!unlink $path) {
      warn "error: can't remove file $path: $!\n";
      closedir(DIR);
      return;
    }
  }
  closedir(DIR);
  return 1;
}

##############################################################################

sub lint_check_dir {
  my $dir = shift;

  # due to the Logger module's globalness (all M::SA objects share the same
  # Logger setup), we can't change the debug level here to only include
  # "config" or otherwise be more terse. :(
  my $spamtest = new Mail::SpamAssassin( {
    rules_filename       => $dir,
    site_rules_filename  => $LOCAL_RULES_DIR,
    ignore_site_cf_files => 1,
    userprefs_filename   => File::Spec->catfile($dir, "doesnotexist"),

    local_tests_only     => 1,
    dont_copy_prefs      => 1,

    PREFIX               => $PREFIX,
    DEF_RULES_DIR        => $DEF_RULES_DIR,
    LOCAL_RULES_DIR      => $LOCAL_RULES_DIR,
    LOCAL_STATE_DIR      => $LOCAL_STATE_DIR,
  });

  # need to kluge disabling bayes since it may try to expire the DB, and
  # without the proper config it's not going to be good.
  $spamtest->{conf}->{use_bayes} = 0;

  my $res = $spamtest->lint_rules();
  $spamtest->finish();

  return $res == 0;
}

##############################################################################

=head1 NAME

sa-update - automate SpamAssassin rule updates

=head1 SYNOPSIS

B<sa-update> [options]

Options:

  --channel channel       Retrieve updates from this channel
                          Use multiple times for multiple channels
  --channelfile file      Retrieve updates from the channels in the file
  --checkonly             Check for update availability, do not install
  --install filename      Install updates directly from this file. Signature
                          verification will use "file.asc" and "file.sha1"
  --allowplugins          Allow updates to load plugin code
  --gpgkey key            Trust the key id to sign releases
                          Use multiple times for multiple keys
  --gpgkeyfile file       Trust the key ids in the file to sign releases
  --gpghomedir path       Store the GPG keyring in this directory
  --gpg and --nogpg       Use (or do not use) GPG to verify updates
                          (--gpg is assumed by use of the above
                          --gpgkey and --gpgkeyfile options)
  --import file           Import GPG key(s) from file into sa-update's
                          keyring. Use multiple times for multiple files
  --updatedir path        Directory to place updates, defaults to the
                          SpamAssassin site rules directory
                          (default: /var/lib/spamassassin/3.003002)
  --refreshmirrors        Force the MIRRORED.BY file to be updated
  -D, --debug [area=n,...]  Print debugging messages
  -v, --verbose           Be more verbose, like print updated channel names
  -V, --version           Print version
  -h, --help              Print usage message

=head1 DESCRIPTION

sa-update automates the process of downloading and installing new rules and
configuration, based on channels.  The default channel is
I<updates.spamassassin.org>, which has updated rules since the previous
release.

Update archives are verified using SHA1 hashes and GPG signatures, by default.

Note that C<sa-update> will not restart C<spamd> or otherwise cause
a scanner to reload the now-updated ruleset automatically.  Instead,
C<sa-update> is typically used in something like the following manner:

        sa-update && /etc/init.d/spamassassin reload

This works because C<sa-update> only returns an exit status of C<0> if
it has successfully downloaded and installed an updated ruleset.

=head1 OPTIONS

=over 4

=item B<--channel>

sa-update can update multiple channels at the same time.  By default, it will
only access "updates.spamassassin.org", but more channels can be specified via
this option.  If there are multiple additional channels, use the option
multiple times, once per channel.  i.e.:

	sa-update --channel foo.example.com --channel bar.example.com

=item B<--channelfile>

Similar to the B<--channel> option, except specify the additional channels in a
file instead of on the commandline.  This is useful when there are a
lot of additional channels.

=item B<--checkonly>

Only check if an update is available, don't actually download and install it.
The exit code will be C<0> or C<1> as described below.

=item B<--install>

Install updates "offline", from the named tar.gz file, instead of performing
DNS lookups and HTTP invocations.

Files named B<file>.sha1 and B<file>.asc will be used for the SHA-1 and GPG
signature, respectively.  The filename provided must contain a version number
of at least 3 digits, which will be used as the channel's update version
number.

Multiple B<--channel> switches cannot be used with B<--install>.  To install
multiple channels from tarballs, run C<sa-update> multiple times with different
B<--channel> and B<--install> switches, e.g.:

        sa-update --channel foo.example.com --install foo-34958.tgz
        sa-update --channel bar.example.com --install bar-938455.tgz

=item B<--allowplugins>

Allow downloaded updates to activate plugins.  The default is not to
activate plugins; any C<loadplugin> or C<tryplugin> lines will be commented
in the downloaded update rules files.

=item B<--gpg>, B<--nogpg>

sa-update by default will verify update archives by use of a SHA1 checksum
and GPG signature.  SHA1 hashes can verify whether or not the downloaded
archive has been corrupted, but it does not offer any form of security
regarding whether or not the downloaded archive is legitimate (aka:
non-modifed by evildoers).  GPG verification of the archive is used to
solve that problem.

If you wish to skip GPG verification, you can use the B<--nogpg> option
to disable its use.  Use of the following gpgkey-related options will
override B<--nogpg> and keep GPG verification enabled.

Note: Currently, only GPG itself is supported (ie: not PGP).  v1.2 has been
tested, although later versions ought to work as well.

=item B<--gpgkey>

sa-update has the concept of "release trusted" GPG keys.  When an archive is
downloaded and the signature verified, sa-update requires that the signature
be from one of these "release trusted" keys or else verification fails.  This
prevents third parties from manipulating the files on a mirror, for instance,
and signing with their own key.

By default, sa-update trusts key id C<265FA05B>, which is the standard
SpamAssassin release key.  Use this option to trust additional keys.  See the
B<--import> option for how to add keys to sa-update's keyring.  For sa-update
to use a key it must be in sa-update's keyring and trusted.

For multiple keys, use the option multiple times.  i.e.:

	sa-update --gpgkey E580B363 --gpgkey 298BC7D0

Note: use of this option automatically enables GPG verification.

=item B<--gpgkeyfile>

Similar to the B<--gpgkey> option, except specify the additional keys in a file
instead of on the commandline.  This is extremely useful when there are a lot
of additional keys that you wish to trust.

=item B<--gpghomedir>

Specify a directory path to use as a storage area for the C<sa-update> GPG
keyring.  By default, this is

        /etc/spamassassin/sa-update-keys

=item B<--import>

Use to import GPG key(s) from a file into the sa-update keyring which is
located in the directory specified by B<--gpghomedir>.  Before using channels
from third party sources, you should use this option to import the GPG key(s)
used by those channels.  You must still use the B<--gpgkey> or B<--gpgkeyfile>
options above to get sa-update to trust imported keys.

To import multiple keys, use the option multiple times.  i.e.:

	sa-update --import channel1-GPG.KEY --import channel2-GPG.KEY

Note: use of this option automatically enables GPG verification.

=item B<--refreshmirrors>

Force the list of sa-update mirrors for each channel, stored in the MIRRORED.BY
file, to be updated.  By default, the MIRRORED.BY file will be cached for up to
7 days after each time it is downloaded.

=item B<--updatedir>

By default, C<sa-update> will use the system-wide rules update directory:

        /var/lib/spamassassin/3.003002

If the updates should be stored in another location, specify it here.

Note that use of this option is not recommended; if you're just using sa-update
to download updated rulesets for a scanner, and sa-update is placing updates in
the wrong directory, you probably need to rebuild SpamAssassin with different
C<Makefile.PL> arguments, instead of overriding sa-update's runtime behaviour.

=item B<-D> [I<area,...>], B<--debug> [I<area,...>]

Produce debugging output.  If no areas are listed, all debugging information is
printed.  Diagnostic output can also be enabled for each area individually;
I<area> is the area of the code to instrument. For example, to produce
diagnostic output on channel, gpg, and http, use:

        sa-update -D channel,gpg,http

For more information about which areas (also known as channels) are
available, please see the documentation at
L<http://wiki.apache.org/spamassassin/DebugChannels>.

=item B<-h>, B<--help>

Print help message and exit.

=item B<-V>, B<--version>

Print sa-update version and exit.

=back

=head1 EXIT CODES

An exit code of C<0> means an update was available, and was downloaded and
installed successfully if --checkonly was not specified.

An exit code of C<1> means no fresh updates were available.

An exit code of C<2> means that at least one update is available but that a
lint check of the site pre files failed.  The site pre files must pass a lint
check before any updates are attempted.

An exit code of C<4> or higher, indicates that errors occurred while
attempting to download and extract updates.

=head1 SEE ALSO

Mail::SpamAssassin(3)
Mail::SpamAssassin::Conf(3)
spamassassin(1)
spamd(1)
<http://wiki.apache.org/spamassassin/RuleUpdates>

=head1 PREREQUESITES

C<Mail::SpamAssassin>

=head1 BUGS

See <http://issues.apache.org/SpamAssassin/>

=head1 AUTHORS

The Apache SpamAssassin(tm) Project <http://spamassassin.apache.org/>

=head1 COPYRIGHT

SpamAssassin is distributed under the Apache License, Version 2.0, as
described in the file C<LICENSE> included with the distribution.

=cut