/var/spool/hylafax/config/lucent-mt-2 is in hylafax-server 3:6.0.6-5.
This file is owned by root:root, with mode 0o644.
The actual contents of the file can be viewed below.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 | # $Id$
#
# prototype config file for MultiTech MT5634ZPX-PCI (Lucent Venus)
# Note that this file is named intentionally "lucent-mt-2"
# to precede "mt-1432" and win the pick; the two files are
# incompatible and conflict in CONFIG catch-strings.
# Non-MT5634ZPX-PCI modems will pass this file by
# because this CONFIG line is model-specific.
#
#
# CONFIG: CLASS2:"Multi-Tech Systems"-"MT5634ZPX-PCI"-*
# CONFIG: CLASS2:"Multi-Tech Systems"-"MT5634ZBA"-*
# CONFIG: CLASS2:*-"ISI5634PCI"-*
# CONFIG: CLASS2:*-"MT5634SMI-V92"-*
#
# BEGIN-SERVER
# END-SERVER
#
ModemType: Class2
ModemRate: 19200
ModemFlowControl: rtscts
ModemNoFlowCmd: AT&K0
ModemSoftFlowCmd: AT&K4
ModemHardFlowCmd: AT&K3
ModemRecvFillOrder: MSB2LSB # classic MultiTech
Class2APQueryCmd: none # not available
Class2BUGCmd: none # not available
Class2NFLOCmd: AT+FLO=0
Class2SFLOCmd: AT+FLO=1
Class2HFLOCmd: AT+FLO=2
# The modem performs copy quality correction (in Class 2... gasp!)
# always, thus it's not a good idea to use host-based CQ. The
# query response is incorrect, also.
Class2CQQueryCmd: "!0-2"
Class2CQCmd: AT+FCQ=1
# If your line supports Caller-ID, you may want to uncomment this...
# ModemResetCmds: AT+VCID=1
# CallIDPattern: "NMBR="
# CallIDPattern: "NAME="
# Or with the MT5634ZBA-DID you'll probably need something like...
# ModemReadyCmds: AT*DS1*DD0*DF1*DN4 # enable DTMF-DID, wink-start, 4 digits
# CallIDPattern: "DTMF" # format of AT*DF1
# CallIDAnswerLength: 4 # four DTMF-DID digits then ATA
|