/var/spool/hylafax/config/umc9624 is in hylafax-server 3:6.0.6-5.
This file is owned by root:root, with mode 0o644.
The actual contents of the file can be viewed below.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 | # HylaFAX prototype configuration file for UMC 9624,2,E,290E 14.4 modem
# - painfully worked out through trial-and-error and HylaFAX bug fixing by
# Lee Howard <faxguy@deanox.com>
#
# Note that this modem will not respond nicely to ATH when already on hook.
# Consequently, HylaFAX versions up to and including 4.1beta3 will not
# play nicely with it. ATH should be removed from reset commands in the
# next release.
#
# CONFIG: CLASS2: *-"9624,2,E,290E"-*
#
# BEGIN-SERVER
# END-SERVER
#
# Modem-related stuff: should reflect modem command interface
# and hardware connection/cabling (e.g. flow control).
#
ModemType: Class2 # use this to setup defaults
ModemRate: 19200 # max rate for DCE-DTE communication
ModemFlowControl: rtscts
ModemSetupDTRCmd: AT&D2 # setup so DTR drop resets modem
ModemSetupDCDCmd: AT&C1 # setup so DCD reflects carrier (or not)
ModemNoFlowCmd: AT&K
ModemHardFlowCmd: AT&K3
ModemSoftFlowCmd: AT&K4
ModemAnswerFaxBeginCmd: "<19200>" # fax mode works better with 19200 baud
ModemRecvFillOrder: MSB2LSB
Class2APQueryCmd: none # prevent ERROR
Class2BUGCmd: none # prevent ERROR
Class2CQQueryCmd: !(0),(0) # no CQ checking capability
Class2DDISCmd: AT+FDIS # workaround broken +FDIS handling
Class2PHCTOCmd: none # prevent ERROR
Class2RecvDataTrigger: "\022"
Class2SPLCmd: none # prevent ERROR
Class2TBCCmd: none # prevent ERROR
|