/usr/share/doc/cluster-glue/stonith/README.riloe is in cluster-glue 1.0.12-7build1.
This file is owned by root:root, with mode 0o644.
The actual contents of the file can be viewed below.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 | Note for iLO 3 users
This plugin doesn't support the iLO version 3. Please use ipmilan
or external/ipmi, iLO3 should support IPMI.
Alain St-Denis wrote the riloe plugin. Here is short usage:
primitive st0 stonith:external/riloe \
hostlist=target-node \
ilo_hostname=ilo-ip-address \
ilo_user=admin ilo_password=secret ilo_protocol=2.0
The following additional parameters are available:
ilo_can_reset:
Set to "1" if the ilo is capable of rebooting the host.
Defaults to '0'.
ilo_protocol:
Defaults to 1.2. Set to the protocol version ilo supports.
ilo_powerdown_method:
"button" or "power", the former simulates pressing the
button, the latter pulling the power plug. Defaults to
"power". The "button" method is easier on the host, but
requires ACPI. "power" should be more reliable, but not to
be used excessively for testing.
ilo_proxyhost (string): Proxy hostname
proxy hostname if required to access ILO board
ilo_proxyport (string, [3128]): Proxy port
proxy port if required to access ILO board
parameter will be ignored if proxy hostname is not set
|