/usr/share/gocode/src/github.com/coreos/bbolt/db.go is in golang-github-coreos-bbolt-dev 1.3.1-coreos.5-1.
This file is owned by root:root, with mode 0o644.
The actual contents of the file can be viewed below.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765 766 767 768 769 770 771 772 773 774 775 776 777 778 779 780 781 782 783 784 785 786 787 788 789 790 791 792 793 794 795 796 797 798 799 800 801 802 803 804 805 806 807 808 809 810 811 812 813 814 815 816 817 818 819 820 821 822 823 824 825 826 827 828 829 830 831 832 833 834 835 836 837 838 839 840 841 842 843 844 845 846 847 848 849 850 851 852 853 854 855 856 857 858 859 860 861 862 863 864 865 866 867 868 869 870 871 872 873 874 875 876 877 878 879 880 881 882 883 884 885 886 887 888 889 890 891 892 893 894 895 896 897 898 899 900 901 902 903 904 905 906 907 908 909 910 911 912 913 914 915 916 917 918 919 920 921 922 923 924 925 926 927 928 929 930 931 932 933 934 935 936 937 938 939 940 941 942 943 944 945 946 947 948 949 950 951 952 953 954 955 956 957 958 959 960 961 962 963 964 965 966 967 968 969 970 971 972 973 974 975 976 977 978 979 980 981 982 983 984 985 986 987 988 989 990 991 992 993 994 995 996 997 998 999 1000 1001 1002 1003 1004 1005 1006 1007 1008 1009 1010 1011 1012 1013 1014 1015 1016 1017 1018 1019 1020 1021 1022 1023 1024 1025 1026 1027 1028 1029 1030 1031 1032 1033 1034 1035 1036 1037 1038 1039 1040 1041 1042 1043 1044 1045 1046 1047 1048 1049 1050 1051 1052 1053 1054 1055 1056 1057 1058 1059 1060 1061 1062 1063 1064 1065 1066 1067 1068 1069 1070 1071 1072 1073 1074 1075 1076 1077 1078 1079 1080 1081 1082 1083 1084 1085 1086 1087 1088 1089 1090 1091 1092 1093 1094 1095 1096 1097 1098 1099 1100 1101 1102 1103 1104 1105 1106 1107 1108 1109 1110 1111 1112 1113 1114 1115 1116 1117 1118 1119 1120 1121 1122 1123 1124 1125 1126 1127 1128 1129 1130 1131 1132 1133 1134 1135 1136 1137 | package bolt
import (
"errors"
"fmt"
"hash/fnv"
"log"
"os"
"runtime"
"sort"
"sync"
"time"
"unsafe"
)
// The largest step that can be taken when remapping the mmap.
const maxMmapStep = 1 << 30 // 1GB
// The data file format version.
const version = 2
// Represents a marker value to indicate that a file is a Bolt DB.
const magic uint32 = 0xED0CDAED
const pgidNoFreelist pgid = 0xffffffffffffffff
// IgnoreNoSync specifies whether the NoSync field of a DB is ignored when
// syncing changes to a file. This is required as some operating systems,
// such as OpenBSD, do not have a unified buffer cache (UBC) and writes
// must be synchronized using the msync(2) syscall.
const IgnoreNoSync = runtime.GOOS == "openbsd"
// Default values if not set in a DB instance.
const (
DefaultMaxBatchSize int = 1000
DefaultMaxBatchDelay = 10 * time.Millisecond
DefaultAllocSize = 16 * 1024 * 1024
)
// default page size for db is set to the OS page size.
var defaultPageSize = os.Getpagesize()
// The time elapsed between consecutive file locking attempts.
const flockRetryTimeout = 50 * time.Millisecond
// DB represents a collection of buckets persisted to a file on disk.
// All data access is performed through transactions which can be obtained through the DB.
// All the functions on DB will return a ErrDatabaseNotOpen if accessed before Open() is called.
type DB struct {
// When enabled, the database will perform a Check() after every commit.
// A panic is issued if the database is in an inconsistent state. This
// flag has a large performance impact so it should only be used for
// debugging purposes.
StrictMode bool
// Setting the NoSync flag will cause the database to skip fsync()
// calls after each commit. This can be useful when bulk loading data
// into a database and you can restart the bulk load in the event of
// a system failure or database corruption. Do not set this flag for
// normal use.
//
// If the package global IgnoreNoSync constant is true, this value is
// ignored. See the comment on that constant for more details.
//
// THIS IS UNSAFE. PLEASE USE WITH CAUTION.
NoSync bool
// When true, skips syncing freelist to disk. This improves the database
// write performance under normal operation, but requires a full database
// re-sync during recovery.
NoFreelistSync bool
// When true, skips the truncate call when growing the database.
// Setting this to true is only safe on non-ext3/ext4 systems.
// Skipping truncation avoids preallocation of hard drive space and
// bypasses a truncate() and fsync() syscall on remapping.
//
// https://github.com/boltdb/bolt/issues/284
NoGrowSync bool
// If you want to read the entire database fast, you can set MmapFlag to
// syscall.MAP_POPULATE on Linux 2.6.23+ for sequential read-ahead.
MmapFlags int
// MaxBatchSize is the maximum size of a batch. Default value is
// copied from DefaultMaxBatchSize in Open.
//
// If <=0, disables batching.
//
// Do not change concurrently with calls to Batch.
MaxBatchSize int
// MaxBatchDelay is the maximum delay before a batch starts.
// Default value is copied from DefaultMaxBatchDelay in Open.
//
// If <=0, effectively disables batching.
//
// Do not change concurrently with calls to Batch.
MaxBatchDelay time.Duration
// AllocSize is the amount of space allocated when the database
// needs to create new pages. This is done to amortize the cost
// of truncate() and fsync() when growing the data file.
AllocSize int
path string
file *os.File
lockfile *os.File // windows only
dataref []byte // mmap'ed readonly, write throws SEGV
data *[maxMapSize]byte
datasz int
filesz int // current on disk file size
meta0 *meta
meta1 *meta
pageSize int
opened bool
rwtx *Tx
txs []*Tx
stats Stats
freelist *freelist
freelistLoad sync.Once
pagePool sync.Pool
batchMu sync.Mutex
batch *batch
rwlock sync.Mutex // Allows only one writer at a time.
metalock sync.Mutex // Protects meta page access.
mmaplock sync.RWMutex // Protects mmap access during remapping.
statlock sync.RWMutex // Protects stats access.
ops struct {
writeAt func(b []byte, off int64) (n int, err error)
}
// Read only mode.
// When true, Update() and Begin(true) return ErrDatabaseReadOnly immediately.
readOnly bool
}
// Path returns the path to currently open database file.
func (db *DB) Path() string {
return db.path
}
// GoString returns the Go string representation of the database.
func (db *DB) GoString() string {
return fmt.Sprintf("bolt.DB{path:%q}", db.path)
}
// String returns the string representation of the database.
func (db *DB) String() string {
return fmt.Sprintf("DB<%q>", db.path)
}
// Open creates and opens a database at the given path.
// If the file does not exist then it will be created automatically.
// Passing in nil options will cause Bolt to open the database with the default options.
func Open(path string, mode os.FileMode, options *Options) (*DB, error) {
db := &DB{
opened: true,
}
// Set default options if no options are provided.
if options == nil {
options = DefaultOptions
}
db.NoSync = options.NoSync
db.NoGrowSync = options.NoGrowSync
db.MmapFlags = options.MmapFlags
db.NoFreelistSync = options.NoFreelistSync
// Set default values for later DB operations.
db.MaxBatchSize = DefaultMaxBatchSize
db.MaxBatchDelay = DefaultMaxBatchDelay
db.AllocSize = DefaultAllocSize
flag := os.O_RDWR
if options.ReadOnly {
flag = os.O_RDONLY
db.readOnly = true
}
// Open data file and separate sync handler for metadata writes.
db.path = path
var err error
if db.file, err = os.OpenFile(db.path, flag|os.O_CREATE, mode); err != nil {
_ = db.close()
return nil, err
}
// Lock file so that other processes using Bolt in read-write mode cannot
// use the database at the same time. This would cause corruption since
// the two processes would write meta pages and free pages separately.
// The database file is locked exclusively (only one process can grab the lock)
// if !options.ReadOnly.
// The database file is locked using the shared lock (more than one process may
// hold a lock at the same time) otherwise (options.ReadOnly is set).
if err := flock(db, mode, !db.readOnly, options.Timeout); err != nil {
db.lockfile = nil // make 'unused' happy. TODO: rework locks
_ = db.close()
return nil, err
}
// Default values for test hooks
db.ops.writeAt = db.file.WriteAt
if db.pageSize = options.PageSize; db.pageSize == 0 {
// Set the default page size to the OS page size.
db.pageSize = defaultPageSize
}
// Initialize the database if it doesn't exist.
if info, err := db.file.Stat(); err != nil {
return nil, err
} else if info.Size() == 0 {
// Initialize new files with meta pages.
if err := db.init(); err != nil {
return nil, err
}
} else {
// Read the first meta page to determine the page size.
var buf [0x1000]byte
// If we can't read the page size, but can read a page, assume
// it's the same as the OS or one given -- since that's how the
// page size was chosen in the first place.
//
// If the first page is invalid and this OS uses a different
// page size than what the database was created with then we
// are out of luck and cannot access the database.
//
// TODO: scan for next page
if bw, err := db.file.ReadAt(buf[:], 0); err == nil && bw == len(buf) {
if m := db.pageInBuffer(buf[:], 0).meta(); m.validate() == nil {
db.pageSize = int(m.pageSize)
}
} else {
return nil, ErrInvalid
}
}
// Initialize page pool.
db.pagePool = sync.Pool{
New: func() interface{} {
return make([]byte, db.pageSize)
},
}
// Memory map the data file.
if err := db.mmap(options.InitialMmapSize); err != nil {
_ = db.close()
return nil, err
}
if db.readOnly {
return db, nil
}
db.loadFreelist()
// Flush freelist when transitioning from no sync to sync so
// NoFreelistSync unaware boltdb can open the db later.
if !db.NoFreelistSync && !db.hasSyncedFreelist() {
tx, err := db.Begin(true)
if tx != nil {
err = tx.Commit()
}
if err != nil {
_ = db.close()
return nil, err
}
}
// Mark the database as opened and return.
return db, nil
}
// loadFreelist reads the freelist if it is synced, or reconstructs it
// by scanning the DB if it is not synced. It assumes there are no
// concurrent accesses being made to the freelist.
func (db *DB) loadFreelist() {
db.freelistLoad.Do(func() {
db.freelist = newFreelist()
if !db.hasSyncedFreelist() {
// Reconstruct free list by scanning the DB.
db.freelist.readIDs(db.freepages())
} else {
// Read free list from freelist page.
db.freelist.read(db.page(db.meta().freelist))
}
db.stats.FreePageN = len(db.freelist.ids)
})
}
func (db *DB) hasSyncedFreelist() bool {
return db.meta().freelist != pgidNoFreelist
}
// mmap opens the underlying memory-mapped file and initializes the meta references.
// minsz is the minimum size that the new mmap can be.
func (db *DB) mmap(minsz int) error {
db.mmaplock.Lock()
defer db.mmaplock.Unlock()
info, err := db.file.Stat()
if err != nil {
return fmt.Errorf("mmap stat error: %s", err)
} else if int(info.Size()) < db.pageSize*2 {
return fmt.Errorf("file size too small")
}
// Ensure the size is at least the minimum size.
var size = int(info.Size())
if size < minsz {
size = minsz
}
size, err = db.mmapSize(size)
if err != nil {
return err
}
// Dereference all mmap references before unmapping.
if db.rwtx != nil {
db.rwtx.root.dereference()
}
// Unmap existing data before continuing.
if err := db.munmap(); err != nil {
return err
}
// Memory-map the data file as a byte slice.
if err := mmap(db, size); err != nil {
return err
}
// Save references to the meta pages.
db.meta0 = db.page(0).meta()
db.meta1 = db.page(1).meta()
// Validate the meta pages. We only return an error if both meta pages fail
// validation, since meta0 failing validation means that it wasn't saved
// properly -- but we can recover using meta1. And vice-versa.
err0 := db.meta0.validate()
err1 := db.meta1.validate()
if err0 != nil && err1 != nil {
return err0
}
return nil
}
// munmap unmaps the data file from memory.
func (db *DB) munmap() error {
if err := munmap(db); err != nil {
return fmt.Errorf("unmap error: " + err.Error())
}
return nil
}
// mmapSize determines the appropriate size for the mmap given the current size
// of the database. The minimum size is 32KB and doubles until it reaches 1GB.
// Returns an error if the new mmap size is greater than the max allowed.
func (db *DB) mmapSize(size int) (int, error) {
// Double the size from 32KB until 1GB.
for i := uint(15); i <= 30; i++ {
if size <= 1<<i {
return 1 << i, nil
}
}
// Verify the requested size is not above the maximum allowed.
if size > maxMapSize {
return 0, fmt.Errorf("mmap too large")
}
// If larger than 1GB then grow by 1GB at a time.
sz := int64(size)
if remainder := sz % int64(maxMmapStep); remainder > 0 {
sz += int64(maxMmapStep) - remainder
}
// Ensure that the mmap size is a multiple of the page size.
// This should always be true since we're incrementing in MBs.
pageSize := int64(db.pageSize)
if (sz % pageSize) != 0 {
sz = ((sz / pageSize) + 1) * pageSize
}
// If we've exceeded the max size then only grow up to the max size.
if sz > maxMapSize {
sz = maxMapSize
}
return int(sz), nil
}
// init creates a new database file and initializes its meta pages.
func (db *DB) init() error {
// Create two meta pages on a buffer.
buf := make([]byte, db.pageSize*4)
for i := 0; i < 2; i++ {
p := db.pageInBuffer(buf[:], pgid(i))
p.id = pgid(i)
p.flags = metaPageFlag
// Initialize the meta page.
m := p.meta()
m.magic = magic
m.version = version
m.pageSize = uint32(db.pageSize)
m.freelist = 2
m.root = bucket{root: 3}
m.pgid = 4
m.txid = txid(i)
m.checksum = m.sum64()
}
// Write an empty freelist at page 3.
p := db.pageInBuffer(buf[:], pgid(2))
p.id = pgid(2)
p.flags = freelistPageFlag
p.count = 0
// Write an empty leaf page at page 4.
p = db.pageInBuffer(buf[:], pgid(3))
p.id = pgid(3)
p.flags = leafPageFlag
p.count = 0
// Write the buffer to our data file.
if _, err := db.ops.writeAt(buf, 0); err != nil {
return err
}
if err := fdatasync(db); err != nil {
return err
}
return nil
}
// Close releases all database resources.
// All transactions must be closed before closing the database.
func (db *DB) Close() error {
db.rwlock.Lock()
defer db.rwlock.Unlock()
db.metalock.Lock()
defer db.metalock.Unlock()
db.mmaplock.RLock()
defer db.mmaplock.RUnlock()
return db.close()
}
func (db *DB) close() error {
if !db.opened {
return nil
}
db.opened = false
db.freelist = nil
// Clear ops.
db.ops.writeAt = nil
// Close the mmap.
if err := db.munmap(); err != nil {
return err
}
// Close file handles.
if db.file != nil {
// No need to unlock read-only file.
if !db.readOnly {
// Unlock the file.
if err := funlock(db); err != nil {
log.Printf("bolt.Close(): funlock error: %s", err)
}
}
// Close the file descriptor.
if err := db.file.Close(); err != nil {
return fmt.Errorf("db file close: %s", err)
}
db.file = nil
}
db.path = ""
return nil
}
// Begin starts a new transaction.
// Multiple read-only transactions can be used concurrently but only one
// write transaction can be used at a time. Starting multiple write transactions
// will cause the calls to block and be serialized until the current write
// transaction finishes.
//
// Transactions should not be dependent on one another. Opening a read
// transaction and a write transaction in the same goroutine can cause the
// writer to deadlock because the database periodically needs to re-mmap itself
// as it grows and it cannot do that while a read transaction is open.
//
// If a long running read transaction (for example, a snapshot transaction) is
// needed, you might want to set DB.InitialMmapSize to a large enough value
// to avoid potential blocking of write transaction.
//
// IMPORTANT: You must close read-only transactions after you are finished or
// else the database will not reclaim old pages.
func (db *DB) Begin(writable bool) (*Tx, error) {
if writable {
return db.beginRWTx()
}
return db.beginTx()
}
func (db *DB) beginTx() (*Tx, error) {
// Lock the meta pages while we initialize the transaction. We obtain
// the meta lock before the mmap lock because that's the order that the
// write transaction will obtain them.
db.metalock.Lock()
// Obtain a read-only lock on the mmap. When the mmap is remapped it will
// obtain a write lock so all transactions must finish before it can be
// remapped.
db.mmaplock.RLock()
// Exit if the database is not open yet.
if !db.opened {
db.mmaplock.RUnlock()
db.metalock.Unlock()
return nil, ErrDatabaseNotOpen
}
// Create a transaction associated with the database.
t := &Tx{}
t.init(db)
// Keep track of transaction until it closes.
db.txs = append(db.txs, t)
n := len(db.txs)
// Unlock the meta pages.
db.metalock.Unlock()
// Update the transaction stats.
db.statlock.Lock()
db.stats.TxN++
db.stats.OpenTxN = n
db.statlock.Unlock()
return t, nil
}
func (db *DB) beginRWTx() (*Tx, error) {
// If the database was opened with Options.ReadOnly, return an error.
if db.readOnly {
return nil, ErrDatabaseReadOnly
}
// Obtain writer lock. This is released by the transaction when it closes.
// This enforces only one writer transaction at a time.
db.rwlock.Lock()
// Once we have the writer lock then we can lock the meta pages so that
// we can set up the transaction.
db.metalock.Lock()
defer db.metalock.Unlock()
// Exit if the database is not open yet.
if !db.opened {
db.rwlock.Unlock()
return nil, ErrDatabaseNotOpen
}
// Create a transaction associated with the database.
t := &Tx{writable: true}
t.init(db)
db.rwtx = t
db.freePages()
return t, nil
}
// freePages releases any pages associated with closed read-only transactions.
func (db *DB) freePages() {
// Free all pending pages prior to earliest open transaction.
sort.Sort(txsById(db.txs))
minid := txid(0xFFFFFFFFFFFFFFFF)
if len(db.txs) > 0 {
minid = db.txs[0].meta.txid
}
if minid > 0 {
db.freelist.release(minid - 1)
}
// Release unused txid extents.
for _, t := range db.txs {
db.freelist.releaseRange(minid, t.meta.txid-1)
minid = t.meta.txid + 1
}
db.freelist.releaseRange(minid, txid(0xFFFFFFFFFFFFFFFF))
// Any page both allocated and freed in an extent is safe to release.
}
type txsById []*Tx
func (t txsById) Len() int { return len(t) }
func (t txsById) Swap(i, j int) { t[i], t[j] = t[j], t[i] }
func (t txsById) Less(i, j int) bool { return t[i].meta.txid < t[j].meta.txid }
// removeTx removes a transaction from the database.
func (db *DB) removeTx(tx *Tx) {
// Release the read lock on the mmap.
db.mmaplock.RUnlock()
// Use the meta lock to restrict access to the DB object.
db.metalock.Lock()
// Remove the transaction.
for i, t := range db.txs {
if t == tx {
last := len(db.txs) - 1
db.txs[i] = db.txs[last]
db.txs[last] = nil
db.txs = db.txs[:last]
break
}
}
n := len(db.txs)
// Unlock the meta pages.
db.metalock.Unlock()
// Merge statistics.
db.statlock.Lock()
db.stats.OpenTxN = n
db.stats.TxStats.add(&tx.stats)
db.statlock.Unlock()
}
// Update executes a function within the context of a read-write managed transaction.
// If no error is returned from the function then the transaction is committed.
// If an error is returned then the entire transaction is rolled back.
// Any error that is returned from the function or returned from the commit is
// returned from the Update() method.
//
// Attempting to manually commit or rollback within the function will cause a panic.
func (db *DB) Update(fn func(*Tx) error) error {
t, err := db.Begin(true)
if err != nil {
return err
}
// Make sure the transaction rolls back in the event of a panic.
defer func() {
if t.db != nil {
t.rollback()
}
}()
// Mark as a managed tx so that the inner function cannot manually commit.
t.managed = true
// If an error is returned from the function then rollback and return error.
err = fn(t)
t.managed = false
if err != nil {
_ = t.Rollback()
return err
}
return t.Commit()
}
// View executes a function within the context of a managed read-only transaction.
// Any error that is returned from the function is returned from the View() method.
//
// Attempting to manually rollback within the function will cause a panic.
func (db *DB) View(fn func(*Tx) error) error {
t, err := db.Begin(false)
if err != nil {
return err
}
// Make sure the transaction rolls back in the event of a panic.
defer func() {
if t.db != nil {
t.rollback()
}
}()
// Mark as a managed tx so that the inner function cannot manually rollback.
t.managed = true
// If an error is returned from the function then pass it through.
err = fn(t)
t.managed = false
if err != nil {
_ = t.Rollback()
return err
}
return t.Rollback()
}
// Batch calls fn as part of a batch. It behaves similar to Update,
// except:
//
// 1. concurrent Batch calls can be combined into a single Bolt
// transaction.
//
// 2. the function passed to Batch may be called multiple times,
// regardless of whether it returns error or not.
//
// This means that Batch function side effects must be idempotent and
// take permanent effect only after a successful return is seen in
// caller.
//
// The maximum batch size and delay can be adjusted with DB.MaxBatchSize
// and DB.MaxBatchDelay, respectively.
//
// Batch is only useful when there are multiple goroutines calling it.
func (db *DB) Batch(fn func(*Tx) error) error {
errCh := make(chan error, 1)
db.batchMu.Lock()
if (db.batch == nil) || (db.batch != nil && len(db.batch.calls) >= db.MaxBatchSize) {
// There is no existing batch, or the existing batch is full; start a new one.
db.batch = &batch{
db: db,
}
db.batch.timer = time.AfterFunc(db.MaxBatchDelay, db.batch.trigger)
}
db.batch.calls = append(db.batch.calls, call{fn: fn, err: errCh})
if len(db.batch.calls) >= db.MaxBatchSize {
// wake up batch, it's ready to run
go db.batch.trigger()
}
db.batchMu.Unlock()
err := <-errCh
if err == trySolo {
err = db.Update(fn)
}
return err
}
type call struct {
fn func(*Tx) error
err chan<- error
}
type batch struct {
db *DB
timer *time.Timer
start sync.Once
calls []call
}
// trigger runs the batch if it hasn't already been run.
func (b *batch) trigger() {
b.start.Do(b.run)
}
// run performs the transactions in the batch and communicates results
// back to DB.Batch.
func (b *batch) run() {
b.db.batchMu.Lock()
b.timer.Stop()
// Make sure no new work is added to this batch, but don't break
// other batches.
if b.db.batch == b {
b.db.batch = nil
}
b.db.batchMu.Unlock()
retry:
for len(b.calls) > 0 {
var failIdx = -1
err := b.db.Update(func(tx *Tx) error {
for i, c := range b.calls {
if err := safelyCall(c.fn, tx); err != nil {
failIdx = i
return err
}
}
return nil
})
if failIdx >= 0 {
// take the failing transaction out of the batch. it's
// safe to shorten b.calls here because db.batch no longer
// points to us, and we hold the mutex anyway.
c := b.calls[failIdx]
b.calls[failIdx], b.calls = b.calls[len(b.calls)-1], b.calls[:len(b.calls)-1]
// tell the submitter re-run it solo, continue with the rest of the batch
c.err <- trySolo
continue retry
}
// pass success, or bolt internal errors, to all callers
for _, c := range b.calls {
if c.err != nil {
c.err <- err
}
}
break retry
}
}
// trySolo is a special sentinel error value used for signaling that a
// transaction function should be re-run. It should never be seen by
// callers.
var trySolo = errors.New("batch function returned an error and should be re-run solo")
type panicked struct {
reason interface{}
}
func (p panicked) Error() string {
if err, ok := p.reason.(error); ok {
return err.Error()
}
return fmt.Sprintf("panic: %v", p.reason)
}
func safelyCall(fn func(*Tx) error, tx *Tx) (err error) {
defer func() {
if p := recover(); p != nil {
err = panicked{p}
}
}()
return fn(tx)
}
// Sync executes fdatasync() against the database file handle.
//
// This is not necessary under normal operation, however, if you use NoSync
// then it allows you to force the database file to sync against the disk.
func (db *DB) Sync() error { return fdatasync(db) }
// Stats retrieves ongoing performance stats for the database.
// This is only updated when a transaction closes.
func (db *DB) Stats() Stats {
db.statlock.RLock()
defer db.statlock.RUnlock()
return db.stats
}
// This is for internal access to the raw data bytes from the C cursor, use
// carefully, or not at all.
func (db *DB) Info() *Info {
return &Info{uintptr(unsafe.Pointer(&db.data[0])), db.pageSize}
}
// page retrieves a page reference from the mmap based on the current page size.
func (db *DB) page(id pgid) *page {
pos := id * pgid(db.pageSize)
return (*page)(unsafe.Pointer(&db.data[pos]))
}
// pageInBuffer retrieves a page reference from a given byte array based on the current page size.
func (db *DB) pageInBuffer(b []byte, id pgid) *page {
return (*page)(unsafe.Pointer(&b[id*pgid(db.pageSize)]))
}
// meta retrieves the current meta page reference.
func (db *DB) meta() *meta {
// We have to return the meta with the highest txid which doesn't fail
// validation. Otherwise, we can cause errors when in fact the database is
// in a consistent state. metaA is the one with the higher txid.
metaA := db.meta0
metaB := db.meta1
if db.meta1.txid > db.meta0.txid {
metaA = db.meta1
metaB = db.meta0
}
// Use higher meta page if valid. Otherwise fallback to previous, if valid.
if err := metaA.validate(); err == nil {
return metaA
} else if err := metaB.validate(); err == nil {
return metaB
}
// This should never be reached, because both meta1 and meta0 were validated
// on mmap() and we do fsync() on every write.
panic("bolt.DB.meta(): invalid meta pages")
}
// allocate returns a contiguous block of memory starting at a given page.
func (db *DB) allocate(txid txid, count int) (*page, error) {
// Allocate a temporary buffer for the page.
var buf []byte
if count == 1 {
buf = db.pagePool.Get().([]byte)
} else {
buf = make([]byte, count*db.pageSize)
}
p := (*page)(unsafe.Pointer(&buf[0]))
p.overflow = uint32(count - 1)
// Use pages from the freelist if they are available.
if p.id = db.freelist.allocate(txid, count); p.id != 0 {
return p, nil
}
// Resize mmap() if we're at the end.
p.id = db.rwtx.meta.pgid
var minsz = int((p.id+pgid(count))+1) * db.pageSize
if minsz >= db.datasz {
if err := db.mmap(minsz); err != nil {
return nil, fmt.Errorf("mmap allocate error: %s", err)
}
}
// Move the page id high water mark.
db.rwtx.meta.pgid += pgid(count)
return p, nil
}
// grow grows the size of the database to the given sz.
func (db *DB) grow(sz int) error {
// Ignore if the new size is less than available file size.
if sz <= db.filesz {
return nil
}
// If the data is smaller than the alloc size then only allocate what's needed.
// Once it goes over the allocation size then allocate in chunks.
if db.datasz < db.AllocSize {
sz = db.datasz
} else {
sz += db.AllocSize
}
// Truncate and fsync to ensure file size metadata is flushed.
// https://github.com/boltdb/bolt/issues/284
if !db.NoGrowSync && !db.readOnly {
if runtime.GOOS != "windows" {
if err := db.file.Truncate(int64(sz)); err != nil {
return fmt.Errorf("file resize error: %s", err)
}
}
if err := db.file.Sync(); err != nil {
return fmt.Errorf("file sync error: %s", err)
}
}
db.filesz = sz
return nil
}
func (db *DB) IsReadOnly() bool {
return db.readOnly
}
func (db *DB) freepages() []pgid {
tx, err := db.beginTx()
defer func() {
err = tx.Rollback()
if err != nil {
panic("freepages: failed to rollback tx")
}
}()
if err != nil {
panic("freepages: failed to open read only tx")
}
reachable := make(map[pgid]*page)
nofreed := make(map[pgid]bool)
ech := make(chan error)
go func() {
for e := range ech {
panic(fmt.Sprintf("freepages: failed to get all reachable pages (%v)", e))
}
}()
tx.checkBucket(&tx.root, reachable, nofreed, ech)
close(ech)
var fids []pgid
for i := pgid(2); i < db.meta().pgid; i++ {
if _, ok := reachable[i]; !ok {
fids = append(fids, i)
}
}
return fids
}
// Options represents the options that can be set when opening a database.
type Options struct {
// Timeout is the amount of time to wait to obtain a file lock.
// When set to zero it will wait indefinitely. This option is only
// available on Darwin and Linux.
Timeout time.Duration
// Sets the DB.NoGrowSync flag before memory mapping the file.
NoGrowSync bool
// Do not sync freelist to disk. This improves the database write performance
// under normal operation, but requires a full database re-sync during recovery.
NoFreelistSync bool
// Open database in read-only mode. Uses flock(..., LOCK_SH |LOCK_NB) to
// grab a shared lock (UNIX).
ReadOnly bool
// Sets the DB.MmapFlags flag before memory mapping the file.
MmapFlags int
// InitialMmapSize is the initial mmap size of the database
// in bytes. Read transactions won't block write transaction
// if the InitialMmapSize is large enough to hold database mmap
// size. (See DB.Begin for more information)
//
// If <=0, the initial map size is 0.
// If initialMmapSize is smaller than the previous database size,
// it takes no effect.
InitialMmapSize int
// PageSize overrides the default OS page size.
PageSize int
// NoSync sets the initial value of DB.NoSync. Normally this can just be
// set directly on the DB itself when returned from Open(), but this option
// is useful in APIs which expose Options but not the underlying DB.
NoSync bool
}
// DefaultOptions represent the options used if nil options are passed into Open().
// No timeout is used which will cause Bolt to wait indefinitely for a lock.
var DefaultOptions = &Options{
Timeout: 0,
NoGrowSync: false,
}
// Stats represents statistics about the database.
type Stats struct {
// Freelist stats
FreePageN int // total number of free pages on the freelist
PendingPageN int // total number of pending pages on the freelist
FreeAlloc int // total bytes allocated in free pages
FreelistInuse int // total bytes used by the freelist
// Transaction stats
TxN int // total number of started read transactions
OpenTxN int // number of currently open read transactions
TxStats TxStats // global, ongoing stats.
}
// Sub calculates and returns the difference between two sets of database stats.
// This is useful when obtaining stats at two different points and time and
// you need the performance counters that occurred within that time span.
func (s *Stats) Sub(other *Stats) Stats {
if other == nil {
return *s
}
var diff Stats
diff.FreePageN = s.FreePageN
diff.PendingPageN = s.PendingPageN
diff.FreeAlloc = s.FreeAlloc
diff.FreelistInuse = s.FreelistInuse
diff.TxN = s.TxN - other.TxN
diff.TxStats = s.TxStats.Sub(&other.TxStats)
return diff
}
type Info struct {
Data uintptr
PageSize int
}
type meta struct {
magic uint32
version uint32
pageSize uint32
flags uint32
root bucket
freelist pgid
pgid pgid
txid txid
checksum uint64
}
// validate checks the marker bytes and version of the meta page to ensure it matches this binary.
func (m *meta) validate() error {
if m.magic != magic {
return ErrInvalid
} else if m.version != version {
return ErrVersionMismatch
} else if m.checksum != 0 && m.checksum != m.sum64() {
return ErrChecksum
}
return nil
}
// copy copies one meta object to another.
func (m *meta) copy(dest *meta) {
*dest = *m
}
// write writes the meta onto a page.
func (m *meta) write(p *page) {
if m.root.root >= m.pgid {
panic(fmt.Sprintf("root bucket pgid (%d) above high water mark (%d)", m.root.root, m.pgid))
} else if m.freelist >= m.pgid && m.freelist != pgidNoFreelist {
// TODO: reject pgidNoFreeList if !NoFreelistSync
panic(fmt.Sprintf("freelist pgid (%d) above high water mark (%d)", m.freelist, m.pgid))
}
// Page id is either going to be 0 or 1 which we can determine by the transaction ID.
p.id = pgid(m.txid % 2)
p.flags |= metaPageFlag
// Calculate the checksum.
m.checksum = m.sum64()
m.copy(p.meta())
}
// generates the checksum for the meta.
func (m *meta) sum64() uint64 {
var h = fnv.New64a()
_, _ = h.Write((*[unsafe.Offsetof(meta{}.checksum)]byte)(unsafe.Pointer(m))[:])
return h.Sum64()
}
// _assert will panic with a given formatted message if the given condition is false.
func _assert(condition bool, msg string, v ...interface{}) {
if !condition {
panic(fmt.Sprintf("assertion failed: "+msg, v...))
}
}
|