This file is indexed.

/usr/share/doc/alsa-tools/hda-verb/README is in alsa-tools 1.1.3-1.

This file is owned by root:root, with mode 0o644.

The actual contents of the file can be viewed below.

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
HDA-VERB -- Send a HD-audio command

hda-verb is a small program to send HD-audio commands to the given
ALSA hwdep device on the hd-audio interface.

First off, build HD-audio driver with hwdep support.  For the kernel
config, set CONFIG_SND_HDA_HWDEP=y.  When you build ALSA drivers from
alsa-driver tarball, usually this is set automatically.

Once snd-hda-intel driver is built with the hwdep support, you should
have a hwdep device such as /dev/snd/hwC0D0.

The program takes four arguments, the hwdep device name, the widget NID,
the verb and the parameter.  For example,

	% hda-verb /dev/snd/hwC0D0 0x12 0x701 2

The verb argument can be a string like "PARAMETERS".  Also the
parameter argument can be a string like "VENDOR_ID" as well.

	% hda-verb /dev/snd/hwC0D0 0x0 PARAMETERS VENDOR_ID

The string is case insensitive.  Also, it doesn't have to be the full
string but only has to be unique.  E.g. "par" is enough to mean
"PARAMETER", and "set_a" is enough as "SET_AMP_GAIN_MUTE".

	% hda-verb /dev/snd/hwC0D0 2 set_a 0xb080

The program executs the given verb, shows the result and quits.
Usually you need to be root to run this command.


*WARNING*
Use this program carefully.  Sending an invalid verb may screw up the
codec communication, which requires either a reboot or reloading of
the sound driver eventually.