likwid 4.3.1+dfsg1-1 / usr / bin / feedGnuplot

#!/usr/bin/perl

package feedgnuplot; # for the metacpan indexer

use strict;
use warnings;
use Getopt::Long;
use Time::HiRes qw( usleep gettimeofday tv_interval );
use IO::Handle;
use List::Util qw( first );
use Scalar::Util qw( looks_like_number );
use Text::ParseWords;
use threads;
use threads::shared;
use Thread::Queue;
use Pod::Usage;
use Time::Piece;

my $VERSION = 1.34;

my %options;
interpretCommandline();

# list containing the plot data. Each element is a hashref of parameters.
# $curve->{datastring} is a string of all the data in this curve that can be
# sent directly to gnuplot. $curve->{datastring_meta} is a hashref {domain =>
# ..., offset_start => ...}. offset_start represents a position in the
# datastring where this particular data element begins. As the data is culled
# with --xlen, the offsets are preserved by using $curve->{datastring_offset} to
# represent the offset IN THE ORIGINAL STRING of the current start of the
# datastring


my @curves = ();

# list mapping curve names to their indices in the @curves list
my %curveIndices = ();

# now start the data acquisition and plotting threads
my $dataQueue;

# Whether any new data has arrived since the last replot
my $haveNewData;

# when the last replot happened
my $last_replot_time = [gettimeofday];

# whether the previous replot was timer based
my $last_replot_is_from_timer = 1;

my $streamingFinished : shared = undef;

if($options{stream})
{
  $dataQueue  = Thread::Queue->new();
  my $addThr  = threads->create(\&mainThread);

  # spawn the plot updating thread. If I'm replotting from a data trigger, I don't need this
  my $plotThr = threads->create(\&plotUpdateThread) if $options{stream} > 0;

  while(<>)
  {
    chomp;

    last if /^exit/;

    # place every line of input to the queue, so that the plotting thread can process it. if we are
    # using an implicit domain (x = line number), then we send it on the data queue also, since
    # $. is not meaningful in the plotting thread
    if(!$options{domain})
    {
      $_ .= " $.";
    }
    $dataQueue->enqueue($_);
  }

  $streamingFinished = 1;
  $dataQueue->enqueue(undef);

  $plotThr->join() if defined $plotThr;
  $addThr->join();
}
else
{ mainThread(); }





sub interpretCommandline
{
  # if I'm using a self-plotting data file with a #! line, then $ARGV[0] will contain ALL of the
  # options and $ARGV[1] will contain the data file to plot. In this case I need to split $ARGV[0] so
  # that GetOptions() can parse it correctly. On the other hand, if I'm plotting normally (not with
  # #!)  a file with spaces in the filename, I don't want to split the filename. Hopefully this logic
  # takes care of both those cases.
  if (exists $ARGV[0] && !-r $ARGV[0])
  {
    unshift @ARGV, shellwords shift @ARGV;
  }

  # everything off by default:
  # do not stream in the data by default
  # point plotting by default.
  # no monotonicity checks by default
  # normal histograms by default
  $options{ maxcurves } = 100;
  $options{ histstyle}  = 'freq';

  # Previously I was using 'legend=s%' and 'curvestyle=s%' for curve addressing. This had cleaner
  # syntax, but disregarded the order of the given options. This resulted in arbitrarily ordered
  # curves. I thus make parse these into lists, and then also make hashes, for later use

  # needed for these to be parsed into an array-ref, these default to []
  $options{legend}     = [];
  $options{curvestyle} = [];
  $options{style}      = [];
  $options{histogram}  = [];
  $options{y2}         = [];
  $options{extracmds}  = [];
  $options{set}        = [];
  $options{unset}      = [];

  $options{curvestyleall} = '';
  $options{styleall}      = '';
  $options{with}          = '';

  $options{rangesize} = [];

  GetOptions(\%options, 'stream:s', 'domain!', 'dataid!', '3d!', 'colormap!', 'lines!', 'points!',
             'circles', 'legend=s{2}', 'autolegend!', 'xlabel=s', 'ylabel=s', 'y2label=s', 'zlabel=s',
             'title=s', 'xlen=f', 'ymin=f', 'ymax=f', 'xmin=s', 'xmax=s', 'y2min=f', 'y2max=f',
             'zmin=f', 'zmax=f', 'y2=s@',
             'style=s{2}', 'curvestyle=s{2}', 'curvestyleall=s', 'styleall=s', 'with=s', 'extracmds=s@', 'set=s@', 'unset=s@',
             'square!', 'square_xy!', 'hardcopy=s', 'maxcurves=i', 'monotonic!', 'timefmt=s',
             'histogram=s@', 'binwidth=f', 'histstyle=s',
             'terminal=s',
             'rangesize=s{2}', 'rangesizeall=i', 'extraValuesPerPoint=i',
             'help', 'dump', 'exit', 'version',
             'geometry=s') or pod2usage( -exitval => 1,
                                         -verbose => 1, # synopsis and args
                                         -output  => \*STDERR );


  # handle various cmdline-option errors
  if ( $options{help} )
  {
    pod2usage( -exitval => 0,
               -verbose => 1, # synopsis and args
               -output  => \*STDOUT );
  }

  if( $options{version} )
  {
    print "feedgnuplot version $VERSION\n";
    exit 0;
  }

  # expand options that are given as comma-separated lists
  for my $listkey (qw(histogram y2))
  {
    @{$options{$listkey}} = map split('\s*,\s*', $_), @{$options{$listkey}}
      if defined $options{$listkey};
  }

  # --style and --curvestyle are synonyms, as are --styleall and
  # --curvestyleall, so fill that in
  if( $options{styleall} )
  {
    if($options{curvestyleall} )
    {
      $options{curvestyleall} .= " $options{styleall}";
    }
    else
    {
      $options{curvestyleall} = $options{styleall};
    }
  }
  push @{$options{curvestyle}}, @{$options{style}};


  # --legend and --curvestyle options are conceptually hashes, but are parsed as
  # arrays in order to preserve the ordering. I parse both of these into hashes
  # because those are useful to have later. After this I can access individual
  # legends with $options{legend_hash}{curveid}
  for my $listkey (qw(legend curvestyle rangesize))
  {
    $options{"${listkey}_hash"} = {};

    my $n = scalar @{$options{$listkey}}/2;
    foreach my $idx (0..$n-1)
    {
      $options{"${listkey}_hash"}{$options{$listkey}[$idx*2]} = $options{$listkey}[$idx*2 + 1];
    }
  }

  if ( defined $options{hardcopy} && defined $options{stream} )
  {
    print STDERR "--stream doesn't make sense together with --hardcopy\n";
    exit -1;
  }

  if ( defined $options{rangesizeall} && defined $options{extraValuesPerPoint} )
  {
    print STDERR "Only one of --rangesizeall and --extraValuesPerPoint may be given\n";
    exit -1;
  }


  # I now set up the rangesize to always be
  #  $options{rangesize_hash}{$id} // $options{rangesize_default}
  if ( $options{rangesizeall} )
  {
      $options{rangesize_default} = $options{rangesizeall};
  }
  else
  {
      $options{rangesize_default} = 1;

      $options{rangesize_default} += $options{extraValuesPerPoint} if ($options{extraValuesPerPoint});
      $options{rangesize_default}++                                if ($options{colormap});
      $options{rangesize_default}++                                if ($options{circles} );
  }


  # parse stream option. Allowed only numbers >= 0 or 'trigger'. After this code
  # $options{stream} is
  #  -1 for triggered replotting
  #  >0 for timed replotting
  #  undef if not streaming
  if(defined $options{stream})
  {
    # if no streaming period is given, default to 1Hz.
    $options{stream} = 1 if $options{stream} eq '';

    if( !looks_like_number $options{stream} )
    {
      if($options{stream} eq 'trigger')
      {
        $options{stream} = 0;
      }
      else
      {
        print STDERR "--stream can only take in values >=0 or 'trigger'\n";
        exit -1;
      }
    }

    if ( $options{stream} == 0 )
    {
      $options{stream} = -1;
    }
    elsif ( $options{stream} <= 0)
    {
      print STDERR "--stream can only take in values >=0 or 'trigger'\n";
      exit -1;
    }
  }

  if( $options{curvestyleall} && $options{with} )
  {
    print STDERR "--curvestyleall and --with are mutually exclusive. Please just use one.\n";
    exit -1;
  }
  if( $options{with} )
  {
    $options{curvestyleall} = "with $options{with}";
    $options{with} = '';
  }

  if ($options{colormap})
  {
    # colormap styles all curves with palette. Seems like there should be a way to do this with a
    # global setting, but I can't get that to work
    $options{curvestyleall} .= ' palette';
  }

  if ( $options{'3d'} )
  {
    if ( !$options{domain} )
    {
      print STDERR "--3d only makes sense with --domain\n";
      exit -1;
    }

    if ( $options{timefmt} )
    {
      print STDERR "--3d makes no sense with --timefmt\n";
      exit -1;
    }

    if ( defined $options{y2min} || defined $options{y2max} || @{$options{y2}} )
    {
      print STDERR "--3d does not make sense with --y2...\n";
      exit -1;
    }

    if ( defined $options{xlen} )
    {
      print STDERR "--3d does not make sense with --xlen\n";
      exit -1;
    }

    if ( defined $options{monotonic} )
    {
      print STDERR "--3d does not make sense with --monotonic\n";
      exit -1;
    }

    if ( defined $options{binwidth} || @{$options{histogram}} )
    {
      print STDERR "--3d does not make sense with histograms\n";
      exit -1;
    }

    if ( defined $options{circles} )
    {
      print STDERR "--3d does not make sense with circles (gnuplot doesn't support this)\n";
      exit -1;
    }
  }
  else
  {
    if ( $options{timefmt} && !$options{domain} )
    {
      print STDERR "--timefmt makes sense only with --domain\n";
      exit -1;
    }

    if(!$options{colormap})
    {
      if ( defined $options{zmin} || defined $options{zmax} || defined $options{zlabel} )
      {
        print STDERR "--zmin/zmax/zlabel only makes sense with --3d or --colormap\n";
        exit -1;
      }
    }

    if ( defined $options{square_xy} )
    {
      print STDERR "--square_xy only makes sense with --3d\n";
      exit -1;
    }
  }

  if(defined $options{xlen} && !$options{stream} )
  {
    print STDERR "--xlen does not make sense without --stream\n";
    exit -1;
  }

  if($options{stream} && defined $options{xlen} &&
     ( defined $options{xmin} || defined $options{xmax}))
  {
    print STDERR "With --stream and --xlen the X bounds are set, so neither --xmin nor --xmax make sense\n";
    exit -1;
  }

  # --xlen implies an order to the data, so I force monotonicity
  $options{monotonic} = 1 if defined $options{xlen};

  if( $options{histstyle} !~ /freq|cum|uniq|cnorm/ )
  {
    print STDERR "unknown histstyle. Allowed are 'freq...', 'cum...', 'uniq...', 'cnorm...'\n";
    exit -1;
  }

  # deal with timefmt
  if ( $options{timefmt} )
  {
    # I need to compute a regex to match the time field and I need to count how
    # many whilespace-separated fields there are.

    # strip leading and trailing whitespace
    $options{timefmt} =~ s/^\s*//;
    $options{timefmt} =~ s/\s*$//;

    my $Nfields = () = split /\s+/, $options{timefmt}, -1;
    $options{timefmt_Ncols} = $Nfields;

    # make sure --xlen is an integer. With a timefmt xlen goes through strptime
    # and strftime, and those are integer-only
    if( defined $options{xlen} )
    {
      if( $options{xlen} - int($options{xlen}) )
      {
        say STDERR "When streaming --xlen MUST be an integer. Rounding up to the nearest second";
        $options{xlen} = 1 + int($options{xlen});
      }
    }
  }
}

sub getGnuplotVersion
{
  open(GNUPLOT_VERSION, 'gnuplot --version |') or die "Couldn't run gnuplot";
  my ($gnuplotVersion) = <GNUPLOT_VERSION> =~ /gnuplot\s*(\d*\.\d*)/;
  if (!$gnuplotVersion)
  {
    print STDERR "Couldn't find the version of gnuplot. Does it work? Trying anyway...\n";
    $gnuplotVersion = 0;
  }
  close(GNUPLOT_VERSION);

  return $gnuplotVersion;
}

sub plotUpdateThread
{
  while(! $streamingFinished)
  {
    usleep( $options{stream} * 1e6 );

    # indicate that the timer was the replot source
    $dataQueue->enqueue('replot timertick');
  }
}

sub sendRangeCommand
{
  my ($name, $min, $max) = @_;

  return unless defined $min || defined $max;

  if( defined $min )
  { $min = "\"$min\""; }
  else
  { $min = ''; }

  if( defined $max )
  { $max = "\"$max\""; }
  else
  { $max = ''; }

  my $cmd = "set $name [$min:$max]\n";
  print PIPE $cmd;
}

sub makeDomainNumeric
{
  my ($domain0) = @_;

  if ( $options{timefmt} )
  {
    my $timepiece = Time::Piece->strptime( $domain0, $options{timefmt} )
      or die "Couldn't parse time format. String '$domain0' doesn't fit format '$options{timefmt}'";

    return $timepiece->epoch();
  }

  return $domain0;
}

sub mainThread
{
    local *PIPE;
    my $dopersist = '';

    if( !$options{stream} && getGnuplotVersion() >= 4.3)
    {
      $dopersist = '--persist';
    }

    if(exists $options{dump})
    {
      *PIPE = *STDOUT;
    }
    else
    {
      my $geometry = defined $options{geometry} ?
        "-geometry $options{geometry}" : '';
      open PIPE, "|gnuplot $geometry $dopersist" or die "Can't initialize gnuplot\n";
    }
    autoflush PIPE 1;

    my $outputfile;
    my $outputfileType;
    if( defined $options{hardcopy})
    {
      $outputfile = $options{hardcopy};
      if( $outputfile =~ /^[^|]                       # starts with anything other than |
                          .*                          # stuff in the middle
                          \.(eps|ps|pdf|png|svg)$/ix) # ends with a known extension
      {
        $outputfileType = lc $1;
      }

      my %terminalOpts =
      ( eps  => 'postscript solid color enhanced eps',
        ps   => 'postscript solid color landscape 10',
        pdf  => 'pdfcairo solid color font ",10" size 11in,8.5in',
        png  => 'png size 1280,1024',
        svg  => 'svg');

      if( !defined $options{terminal} &&
           defined $outputfileType    &&
           $terminalOpts{$outputfileType} )
      {
        $options{terminal} = $terminalOpts{$outputfileType};
      }

      die "Asked to plot to file '$outputfile', but I don't know which terminal to use, and no --terminal given"
        unless $options{terminal};
    }
    print PIPE "set terminal $options{terminal}\n" if $options{terminal};
    print PIPE "set output \"$outputfile\"\n"      if $outputfile;

    # set up plotting style
    my $style = '';
    if($options{lines})  { $style .= 'lines';}
    if($options{points}) { $style .= 'points';}
    if($options{circles})
    {
      $options{curvestyleall} = "with circles $options{curvestyleall}";
    }

    print PIPE "set style data $style\n" if $style;
    print PIPE "set grid\n";

    print(PIPE "set xlabel  \"$options{xlabel }\"\n") if defined $options{xlabel};
    print(PIPE "set ylabel  \"$options{ylabel }\"\n") if defined $options{ylabel};
    print(PIPE "set zlabel  \"$options{zlabel }\"\n") if defined $options{zlabel};
    print(PIPE "set y2label \"$options{y2label}\"\n") if defined $options{y2label};
    print(PIPE "set title   \"$options{title  }\"\n") if defined $options{title};

    if($options{square})
    {
      # set a square aspect ratio. Gnuplot does this differently for 2D and 3D plots
      if(! $options{'3d'})
      {
        print(PIPE "set size ratio -1\n");
      }
      else
      {
        print(PIPE "set view equal xyz\n");
      }
    }

    if($options{square_xy})
    {
      print(PIPE "set view equal xy\n");
    }

# For the specified values, set the legend entries to 'title "blah blah"'
    if(@{$options{legend}})
    {
      # @{$options{legend}} is a list where consecutive pairs are (curveID,
      # legend). I use $options{legend} here instead of $options{legend_hash}
      # because I create a new curve when I see a new one, and the hash is
      # unordered, thus messing up the ordering
      my $n = scalar @{$options{legend}}/2;
      foreach my $idx (0..$n-1)
      {
        setCurveLabel($options{legend}[$idx*2    ],
                      $options{legend}[$idx*2 + 1]);
      }
    }

# add the extra curve options
    if(@{$options{curvestyle}})
    {
      # @{$options{curvestyle}} is a list where consecutive pairs are (curveID,
      # style). I use $options{curvestyle} here instead of
      # $options{curvestyle_hash} because I create a new curve when I see a new
      # one, and the hash is unordered, thus messing up the ordering
      my $n = scalar @{$options{curvestyle}}/2;
      foreach my $idx (0..$n-1)
      {
        addCurveOption($options{curvestyle}[$idx*2    ],
                       $options{curvestyle}[$idx*2 + 1]);
      }
    }

# For the values requested to be printed on the y2 axis, set that
    addCurveOption($_, 'axes x1y2') foreach (@{$options{y2}});

# timefmt
    if( $options{timefmt} )
    {
      print(PIPE "set timefmt '$options{timefmt}'\n");
      print(PIPE "set xdata time\n");
    }

# add the extra global options
    print(PIPE "$_\n")       foreach (@{$options{extracmds}});
    print(PIPE "set $_\n")   foreach (@{$options{set}});
    print(PIPE "unset $_\n") foreach (@{$options{unset}});

# set up histograms
    $options{binwidth} ||= 1;   # if no binwidth given, set it to 1
    print PIPE
      "set boxwidth $options{binwidth}\n" .
      "histbin(x) = $options{binwidth} * floor(0.5 + x/$options{binwidth})\n";

    setCurveAsHistogram( $_ ) foreach (@{$options{histogram}});

# set all the axis ranges
    # If a bound isn't given I want to set it to the empty string, so I can communicate it simply to
    # gnuplot
    print PIPE "set xtics\n";

    if(@{$options{y2}})
    {
      print PIPE "set ytics nomirror\n";
      print PIPE "set y2tics\n";
      # if any of the ranges are given, set the range
      sendRangeCommand( "y2range", $options{y2min}, $options{y2max} );
    }

    # if any of the ranges are given, set the range
    sendRangeCommand( "xrange",  $options{xmin}, $options{xmax} );
    sendRangeCommand( "yrange",  $options{ymin}, $options{ymax} );
    sendRangeCommand( "zrange",  $options{zmin}, $options{zmax} );
    sendRangeCommand( "cbrange", $options{zmin}, $options{zmax} ) if($options{colormap});




    # latest domain variable present in our data
    my $latestX;

    # The domain of the current point
    my @domain;

    # The x-axis domain represented as a number. This is exactly the same as
    # $domain[0] unless the x-axis domain uses a timefmt. Then this is the
    # number of seconds since the UNIX epoch.
    my $domain0_numeric;

    # I should be using the // operator, but I'd like to be compatible with perl 5.8
    while( $_ = (defined $dataQueue ? $dataQueue->dequeue() : <>))
    {
      next if /^#/o;

      if( $options{stream} )
      {
        if(/^clear/o )
        {
          clearCurves();
          next;
        }

        if(/^replot/o )
        {
          # /timertick/ determines if the timer was the source of the replot
          replot( $domain0_numeric, /timertick/ );
          next;
        }

        # /exit/ is handled in the data-reading thread
      }

      if(! /^replot/o)
      {
        # parse the incoming data lines. The format is
        # x id0 dat0 id1 dat1 ....
        # where idX is the ID of the curve that datX corresponds to
        #
        # $options{domain} indicates whether the initial 'x' is given or not (if not, the line
        # number is used)
        # $options{dataid} indicates whether idX is given or not (if not, the point order in the
        # line is used)
        # 3d plots require $options{domain}, and dictate "x y" for the domain instead of just "x"

        my @fields = split;

        if($options{domain})
        {
          if( $options{timefmt} )
          {
              # no point if doing anything unless I have at least the domain and
              # 1 piece of data
              next if @fields < $options{timefmt_Ncols}+1;

              $domain[0] = join (' ', splice( @fields, 0, $options{timefmt_Ncols}) );
              $domain0_numeric = makeDomainNumeric( $domain[0] );
          }
          elsif(!$options{'3d'})
          {
              # no point if doing anything unless I have at least the domain and
              # 1 piece of data
              next if @fields < 1+1;

              $domain[0] = $domain0_numeric = shift @fields;
          }
          else
          {
              # no point if doing anything unless I have at least the domain and
              # 1 piece of data
              next if @fields < 2+1;

              @domain = splice(@fields, 0, 2);
          }

          if( $options{monotonic} )
          {
            if( defined $latestX && $domain0_numeric < $latestX )
            {
              # the x-coordinate of the new point is in the past, so I wipe out
              # all the data and start anew. Before I wipe the old data, I
              # replot the old data
              replot( $domain0_numeric );
              clearCurves();
              $latestX = undef;
            }
            else
            { $latestX = $domain0_numeric; }
          }
        }
        else
        {
          # since $. is not meaningful in the plotting thread if we're using the data queue, we pass
          # $. on the data queue in that case
          if(defined $dataQueue)
          {
            $domain[0] = pop @fields;
          }
          else
          {
            $domain[0] = $.;
          }
          $domain0_numeric = makeDomainNumeric( $domain[0] );
        }

        my $id = -1;

        while(@fields)
        {
            if($options{dataid})
            {
                $id = shift @fields;
            }
            else
            {
                $id++;
            }

            # I'd like to use //, but I guess some people are still on perl 5.8
            my $rangesize = exists $options{rangesize_hash}{$id} ?
              $options{rangesize_hash}{$id} :
              $options{rangesize_default};

            last if @fields < $rangesize;

            pushPoint(getCurve($id),
                      join(' ',
                           @domain,
                           splice( @fields, 0, $rangesize ) ) . "\n",
                      $domain0_numeric);
        }
      }
    }

    # if we were streaming, we're now done!
    if( $options{stream} )
    {
      return;
    }

    # finished reading in all. Plot what we have
    plotStoredData();

    if ( defined $options{hardcopy})
    {
      print PIPE "set output\n";

      # sleep until the plot file exists, and it is closed. Sometimes the output
      # is still being written at this point. If the output filename starts with
      # '|', gnuplot pipes the output to that process, instead of writing to a
      # file. In that case I don't make sure the file exists, since there IS not
      # file
      if( $options{hardcopy} !~ /^\|/ )
      {
        usleep(100_000) until -e $outputfile;
        usleep(100_000) until(system("fuser -s \"$outputfile\""));
      }

      print "Wrote output to $outputfile\n";
      return;
    }

    # we persist gnuplot, so we shouldn't need this sleep. However, once
    # gnuplot exits, but the persistent window sticks around, you can no
    # longer interactively zoom the plot. So we still sleep
    sleep(100000) unless $options{dump} || $options{exit};
}

sub pruneOldData
{
  my ($oldestx) = @_;

  foreach my $curve (@curves)
  {
    next unless $curve->{datastring};

    my $meta = $curve->{datastring_meta};

    my $firstInWindow = first {$meta->[$_]{domain} >= $oldestx} 0..$#$meta;
    if ( !defined $firstInWindow )
    {
      # everything is too old. Clear out all the data
      $curve->{datastring}        = '';
      $curve->{datastring_meta}   = [];
      $curve->{datastring_offset} = 0;
    }
    elsif ( $firstInWindow >= 2 )
    {
      # clear out everything that's too old, except for one point. This point
      # will be off the plot, but if we're plotting lines there will be a
      # connecting line to it. Some of the line will be visible
      substr( $curve->{datastring}, 0,
              $meta->[$firstInWindow-1]{offset_start} - $curve->{datastring_offset},
              '' );
      $curve->{datastring_offset} = $meta->[$firstInWindow-1]{offset_start};
    }
  }
}

sub plotStoredData
{
  # get the options for those curves that havse any data
  my @nonemptyCurves = grep { $_->{datastring} } @curves;
  my @extraopts = map {$_->{options}} @nonemptyCurves;

  my $body = join(', ' , map({ "'-' $_" } @extraopts) );
  if($options{'3d'}) { print PIPE "splot $body\n"; }
  else               { print PIPE  "plot $body\n"; }

  foreach my $curve (@nonemptyCurves)
  {
    print PIPE $curve->{datastring};
    print PIPE "e\n";
  }
}

sub updateCurveOptions
{
  # generates the 'options' string for a curve, based on its legend title and its other options
  # These could be integrated into a single string, but that raises an issue in the no-title
  # case. When no title is specified, gnuplot will still add a legend entry with an unhelpful '-'
  # label. Thus I explicitly do 'notitle' for that case

  my ($curve, $id) = @_;

  # use the given title, unless we're generating a legend automatically. Given titles
  # override autolegend
  my $title;
  if(defined $curve->{title})
  { $title = $curve->{title}; }
  elsif( $options{autolegend} )
  { $title = $id; }

  my $titleoption = defined $title ? "title \"$title\"" : "notitle";

  my ($curvestyleall);
  if( defined $options{curvestyle_hash}{$id} )
  {
    # I have a curve-specific style set with --curvestyle. This style lives in
    # $curve->{extraoptions}, and it overrides the global styles
    $curvestyleall = '';
  }
  else
  {
    $curvestyleall = $options{curvestyleall};
  }

  my $histoptions = $curve->{histoptions} || '';

  my $usingoptions = '';
  if( $options{timefmt} )
  {
      # with --timefmt I need an explicit 'using' specification. I specify the
      # columns as 1:2:3..... I need the right number of columns (this is given
      # as 1 + rangesize). I also need to start the range at the first column
      # past the timefmt

      # I'd like to use //, but I guess some people are still on perl 5.8
      my $rangesize = exists $options{rangesize_hash}{$id} ?
        $options{rangesize_hash}{$id} :
        $options{rangesize_default};

      my @rest = map {$_ + $options{timefmt_Ncols}} (1..$rangesize);

      $usingoptions = "using 1:" . join(':', @rest);
  }

  $curve->{options} = "$histoptions $usingoptions $titleoption $curve->{extraoptions} $curvestyleall";
}

sub getCurve
{
  # This function returns the curve corresponding to a particular label, creating a new curve if
  # necessary

  if(scalar @curves >= $options{maxcurves})
  {
    print STDERR "Tried to exceed the --maxcurves setting.\n";
    print STDERR "Invoke with a higher --maxcurves limit if you really want to do this.\n";
    exit -1;
  }

  my ($id) = @_;

  if( !exists $curveIndices{$id} )
  {
    push @curves, {extraoptions      => ' ',
                   datastring        => '',
                   datastring_meta   => [],
                   datastring_offset => 0}; # push a curve with no data and no options
    $curveIndices{$id} =  $#curves;

    updateCurveOptions($curves[$#curves], $id);
  }
  return $curves[$curveIndices{$id}];
}

sub addCurveOption
{
  my ($id, $str) = @_;

  my $curve = getCurve($id);
  $curve->{extraoptions} .= "$str ";
  updateCurveOptions($curve, $id);
}

sub setCurveLabel
{
  my ($id, $str) = @_;

  my $curve = getCurve($id);
  $curve->{title} = $str;
  updateCurveOptions($curve, $id);
}

sub setCurveAsHistogram
{
  my ($id, $str) = @_;

  my $curve = getCurve($id);
  $curve->{histoptions} = 'using (histbin($2)):(1.0) smooth ' . $options{histstyle};

  updateCurveOptions($curve, $id);
}

# remove all the curve data
sub clearCurves
{
  foreach my $curve(@curves)
  {
    $curve->{datastring}        = '';
    $curve->{datastring_meta}   = [];
    $curve->{datastring_offset} = 0;
  }
}

sub replot
{
  return unless $haveNewData;
  $haveNewData = undef;

  return if !$options{stream};


  # The logic involving domain rollover replotting due to --monotonic is a bit
  # tricky. I want this:

  # if( domain rolls over slowly )
  # {
  #   should update on a timer;
  #   when the domain rolls over, --monotonic should force a replot
  # }
  # if( domain rolls over quickly )
  # {
  #   should update when the domain rolls over,
  #     at most as quickly as the timer indicates
  # }


  my ($domain0_numeric, $replot_is_from_timer) = @_;

  my $now = [gettimeofday];

  if( # If there is no replot timer at all, replot at any indication
      $options{stream} < 0 ||

      # if the last replot was timer-based, but this one isn't, force a replot.
      # This makes sure that a replot happens for a domain rollover shortly
      # after a timer replot
      !$replot_is_from_timer && $last_replot_is_from_timer ||

      # if enough time has elapsed since the last replot, it's ok to replot
      tv_interval ( $last_replot_time, $now ) > 0.8*$options{stream} )
  {
    # ok, then. We really need to replot
    if ( defined $options{xlen} )
    {
      # we have an --xlen, so we need to clean out the old data
      pruneOldData( $domain0_numeric - $options{xlen} );

      my ($xmin, $xmax) = ($domain0_numeric - $options{xlen}, $domain0_numeric);
      if ( defined $options{timefmt} )
      {
        # if we're using a timefmt, I need to convert my xmin range from
        # seconds-since-the-epoch BACK to the timefmt. Sheesh
        ($xmin, $xmax) = map {Time::Piece->strptime( $_, '%s' )->strftime( $options{timefmt} ) } ($xmin, $xmax);
      }
      sendRangeCommand( "xrange", $xmin, $xmax );
    }

    plotStoredData();


    # update replot state
    $last_replot_time          = $now;
    $last_replot_is_from_timer = $replot_is_from_timer;
  }
}

# function to add a point to the plot. Assumes that the curve indexed by $idx already exists
sub pushPoint
{
  my ($curve, $datastring, $domain0_numeric) = @_;

  push @{$curve->{datastring_meta}}, { offset_start => length( $curve->{datastring} ) + $curve->{datastring_offset},
                                       domain       => $domain0_numeric };
  $curve->{datastring} .= $datastring;

  $haveNewData = 1;
}


=head1 NAME

feedgnuplot - General purpose pipe-oriented plotting tool

=head1 SYNOPSIS

Simple plotting of piped data:

 $ seq 5 | awk '{print 2*$1, $1*$1}'
 2 1
 4 4
 6 9
 8 16
 10 25

 $ seq 5 | awk '{print 2*$1, $1*$1}' |
   feedgnuplot --lines --points --legend 0 "data 0" --title "Test plot" --y2 1
               --terminal 'dumb 80,40' --exit

                                  Test plot

  10 ++------+--------+-------+-------+-------+--------+-------+------*A 25
     +       +        +       +       +       +        +       +    **#+
     |       :        :       :       :       :        : data 0+**A*** |
     |       :        :       :       :       :        :       :** #   |
   9 ++.......................................................**.##....|
     |       :        :       :       :       :        :    ** :#      |
     |       :        :       :       :       :        :  **   #       |
     |       :        :       :       :       :        :**   ##:      ++ 20
   8 ++................................................A....#..........|
     |       :        :       :       :       :      **:   #   :       |
     |       :        :       :       :       :    **  : ##    :       |
     |       :        :       :       :       :  **    :#      :       |
     |       :        :       :       :       :**      B       :       |
   7 ++......................................**......##................|
     |       :        :       :       :    ** :    ##  :       :      ++ 15
     |       :        :       :       :  **   :   #    :       :       |
     |       :        :       :       :**     : ##     :       :       |
   6 ++..............................*A.......##.......................|
     |       :        :       :    ** :     ##:        :       :       |
     |       :        :       :  **   :    #  :        :       :       |
     |       :        :       :**     :  ##   :        :       :      ++ 10
   5 ++......................**........##..............................|
     |       :        :    ** :      #B       :        :       :       |
     |       :        :  **   :    ## :       :        :       :       |
     |       :        :**     :  ##   :       :        :       :       |
   4 ++...............A.......###......................................|
     |       :      **:     ##:       :       :        :       :       |
     |       :    **  :   ##  :       :       :        :       :      ++ 5
     |       :  **    : ##    :       :       :        :       :       |
     |       :**    ##B#      :       :       :        :       :       |
   3 ++.....**..####...................................................|
     |    **####      :       :       :       :        :       :       |
     |  **## :        :       :       :       :        :       :       |
     B**     +        +       +       +       +        +       +       +
   2 A+------+--------+-------+-------+-------+--------+-------+------++ 0
     1      1.5       2      2.5      3      3.5       4      4.5      5


Simple real-time plotting example: plot how much data is received on the wlan0
network interface in bytes/second (uses bash, awk and Linux):

 $ while true; do sleep 1; cat /proc/net/dev; done |
   gawk '/wlan0/ {if(b) {print $2-b; fflush()} b=$2}' |
   feedgnuplot --lines --stream --xlen 10 --ylabel 'Bytes/sec' --xlabel seconds

=head1 DESCRIPTION

This is a flexible, command-line-oriented frontend to Gnuplot. It creates
plots from data coming in on STDIN or given in a filename passed on the
commandline. Various data representations are supported, as is hardcopy
output and streaming display of live data. A simple example:

 $ seq 5 | awk '{print 2*$1, $1*$1}' | feedgnuplot

You should see a plot with two curves. The C<awk> command generates some data to
plot and the C<feedgnuplot> reads it in from STDIN and generates the plot. The
C<awk> invocation is just an example; more interesting things would be plotted
in normal usage. No commandline-options are required for the most basic
plotting. Input parsing is flexible; every line need not have the same number of
points. New curves will be created as needed.

The most commonly used functionality of gnuplot is supported directly by the
script. Anything not directly supported can still be done with options such as
C<--set>, C<--extracmds> C<--style>, etc. Arbitrary gnuplot commands can be
passed in with C<--extracmds>. For example, to turn off the grid, you can pass
in C<--extracmds 'unset grid'>. Commands C<--set> and C<--unset> exists to
provide nicer syntax, so this is equivalent to passing C<--unset grid>. As many
of these options as needed can be passed in. To add arbitrary curve styles, use
C<--style curveID extrastyle>. Pass these more than once to affect more than one
curve.

To apply an extra style to I<all> the curves that lack an explicit C<--style>,
pass in C<--styleall extrastyle>. In the most common case, the extra style is
C<with something>. To support this more simply, you can pass in C<--with
something> instead of C<--styleall 'with something'>. C<--styleall> and
C<--with> are mutually exclusive. Furthermore any curve-specific C<--style>
overrides the global C<--styleall> or C<--with> setting.

=head2 Data formats

By default, each value present in the incoming data represents a distinct data
point, as demonstrated in the original example above (we had 10 numbers in the
input and 10 points in the plot). If requested, the script supports more
sophisticated interpretation of input data

=head3 Domain selection

If C<--domain> is passed in, the first value on each line of input is
interpreted as the I<X>-value for the rest of the data on that line. Without
C<--domain> the I<X>-value is the line number, and the first value on a line is
a plain data point like the others. Default is C<--nodomain>. Thus the original
example above produces 2 curves, with B<1,2,3,4,5> as the I<X>-values. If we run
the same command with C<--domain>:

 $ seq 5 | awk '{print 2*$1, $1*$1}' | feedgnuplot --domain

we get only 1 curve, with B<2,4,6,8,10> as the I<X>-values. As many points as
desired can appear on a single line, but all points on a line are associated
with the I<X>-value at the start of that line.

=head3 Curve indexing

By default, each column represents a separate curve. This is fine unless sparse
data is to be plotted. With the C<--dataid> option, each point is represented by
2 values: a string identifying the curve, and the value itself. If we add
C<--dataid> to the original example:

 $ seq 5 | awk '{print 2*$1, $1*$1}' | feedgnuplot --dataid --autolegend

we get 5 different curves with one point in each. The first column, as produced
by C<awk>, is B<2,4,6,8,10>. These are interpreted as the IDs of the curves to
be plotted. The C<--autolegend> option adds a legend using the given IDs to
label the curves. The IDs need not be numbers; generic strings are accepted. As
many points as desired can appear on a single line. C<--domain> can be used in
conjunction with C<--dataid>.

=head3 Multi-value style support

Depending on how gnuplot is plotting the data, more than one value may be needed
to represent the range of a single point. Basic 2D plots have 2 numbers
representing each point: 1 domain and 1 range. But if plotting with
C<--circles>, for instance, then there's an extra range value: the radius. A
similar situation exists with C<--colormap> where each point contains the
position I<and> the color. There are other gnuplot styles that require more data
(such as error bars), but none of these are directly supported by the script.
They can still be used, however, by specifying the specific style with
C<--style>, and specifying how many values are needed for each point with
C<--rangesizeall> or C<--rangesize> or C<--extraValuesPerPoint>. Those options
that specify the range size are required I<only> for styles not explicitly
supported by feedgnuplot; supported styles do the right thing automatically.

More examples: if making a 2d plot of y error bars where gnuplot expects a
(x,y,ydelta) tuple for each point, you want C<--rangesizeall 2> because you have
one domain value (x) and 2 range values (y,ydelta). Gnuplot can also plot
lopsided y errorbars by giving a tuple (x,y,ylow,yhigh). This is similar as
before, but you want C<--rangesizeall 3> instead.


=head3 3D data

To plot 3D data, pass in C<--3d>. C<--domain> MUST be given when plotting 3D
data to avoid domain ambiguity. If 3D data is being plotted, there are by
definition 2 domain values instead of one (I<Z> as a function of I<X> and I<Y>
instead of I<Y> as a function of I<X>). Thus the first 2 values on each line are
interpreted as the domain instead of just 1. The rest of the processing happens
the same way as before.

=head3 Time/date data

If the input data domain is a time/date, this can be interpreted with
C<--timefmt>. This option takes a single argument: the format to use to parse
the data. The format is documented in 'set timefmt' in gnuplot, although the
common flags that C<strftime> understands are generally supported. The backslash
sequences in the format are I<not> supported, so if you want a tab, put in a tab
instead of \t. Whitespace in the format I<is> supported. When this flag is
given, some other options act a little bit differently:

=over

=item

C<--xlen> is an I<integer> in seconds

=item

C<--xmin> and C<--xmax> I<must> use the format passed in to C<--timefmt>

=back

Using this option changes both the way the input is parsed I<and> the way the
x-axis tics are labelled. Gnuplot tries to be intelligent in this labelling, but
it doesn't always do what the user wants. The labelling can be controlled with
the gnuplot C<set format> command, which takes the same type of format string as
C<--timefmt>. Example:

 $ sar 1 -1 |
   awk '$1 ~ /..:..:../ && $8 ~/^[0-9\.]*$/ {print $1,$8; fflush()}' |
   feedgnuplot --stream --domain
                --lines --timefmt '%H:%M:%S'
                --set 'format x "%H:%M:%S"'

This plots the 'idle' CPU consumption against time.

Note that while gnuplot supports the time/date on any axis, I<feedgnuplot>
currently supports it I<only> as the x-axis domain. This may change in the
future.

=head2 Real-time streaming data

To plot real-time data, pass in the C<--stream [refreshperiod]> option. Data
will then be plotted as it is received. The plot will be updated every
C<refreshperiod> seconds. If the period isn't specified, a 1Hz refresh rate is
used. To refresh at specific intervals indicated by the data, set the
refreshperiod to 0 or to 'trigger'. The plot will then I<only> be refreshed when
a data line 'replot' is received. This 'replot' command works in both triggered
and timed modes, but in triggered mode, it's the only way to replot. Look in
L</"Special data commands"> for more information.

To plot only the most recent data (instead of I<all> the data), C<--xlen
windowsize> can be given. This will create an constantly-updating, scrolling
view of the recent past. C<windowsize> should be replaced by the desired length
of the domain window to plot, in domain units (passed-in values if C<--domain>
or line numbers otherwise). If the domain is a time/date via C<--timefmt>, then
C<windowsize> is and I<integer> in seconds.

=head3 Special data commands

If we are reading streaming data, the input stream can contain special commands
in addition to the raw data. Feedgnuplot looks for these at the start of every
input line. If a command is detected, the rest of the line is discarded. These
commands are

=over

=item C<replot>

This command refreshes the plot right now, instead of waiting for the next
refresh time indicated by the timer. This command works in addition to the timed
refresh, as indicated by C<--stream [refreshperiod]>.

=item C<clear>

This command clears out the current data in the plot. The plotting process
continues, however, to any data following the C<clear>.

=item C<exit>

This command causes feedgnuplot to exit.

=back

=head2 Hardcopy output

The script is able to produce hardcopy output with C<--hardcopy outputfile>. The
output type can be inferred from the filename, if B<.ps>, B<.eps>, B<.pdf>,
B<.svg> or B<.png> is requested. If any other file type is requested,
C<--terminal> I<must> be passed in to tell gnuplot how to make the plot.

=head2 Self-plotting data files

This script can be used to enable self-plotting data files. There are 2 ways of
doing this: with a shebang (#!) or with inline perl data.

=head3 Self-plotting data with a #!

A self-plotting, executable data file C<data> is formatted as

 $ cat data
 #!/usr/bin/feedgnuplot --lines --points
 2 1
 4 4
 6 9
 8 16
 10 25
 12 36
 14 49
 16 64
 18 81
 20 100
 22 121
 24 144
 26 169
 28 196
 30 225

This is the shebang (#!) line followed by the data, formatted as before. The
data file can be plotted simply with

 $ ./data

The caveats here are that on Linux the whole #! line is limited to 127
characters and that the full path to feedgnuplot must be given. The 127
character limit is a serious limitation, but this can likely be resolved with a
kernel patch. I have only tried on Linux 2.6.

=head3 Self-plotting data with perl inline data

Perl supports storing data and code in the same file. This can also be used to
create self-plotting files:

 $ cat plotdata.pl
 #!/usr/bin/perl
 use strict;
 use warnings;

 open PLOT, "| feedgnuplot --lines --points" or die "Couldn't open plotting pipe";
 while( <DATA> )
 {
   my @xy = split;
   print PLOT "@xy\n";
 }
 __DATA__
 2 1
 4 4
 6 9
 8 16
 10 25
 12 36
 14 49
 16 64
 18 81
 20 100
 22 121
 24 144
 26 169
 28 196
 30 225

This is especially useful if the logged data is not in a format directly
supported by feedgnuplot. Raw data can be stored after the __DATA__ directive,
with a small perl script to manipulate the data into a useable format and send
it to the plotter.

=head1 ARGUMENTS

=over

=item

--C<[no]domain>

If enabled, the first element of each line is the domain variable. If not, the
point index is used

=item

--C<[no]dataid>

If enabled, each data point is preceded by the ID of the data set that point
corresponds to. This ID is interpreted as a string, NOT as just a number. If not
enabled, the order of the point is used.

As an example, if line 3 of the input is "0 9 1 20" then

=over

=item

C<--nodomain --nodataid> would parse the 4 numbers as points in 4 different
curves at x=3

=item

C<--domain --nodataid> would parse the 4 numbers as points in 3 different
curves at x=0. Here, 0 is the x-variable and 9,1,20 are the data values

=item

C<--nodomain --dataid> would parse the 4 numbers as points in 2 different
curves at x=3. Here 0 and 1 are the data IDs and 9 and 20 are the
data values

=item

C<--domain --dataid> would parse the 4 numbers as a single point at
x=0. Here 9 is the data ID and 1 is the data value. 20 is an extra
value, so it is ignored. If another value followed 20, we'd get another
point in curve ID 20

=back

=item

C<--[no]3d>

Do [not] plot in 3D. This only makes sense with C<--domain>. Each domain here is
an (x,y) tuple

=item

--C<timefmt [format]>

Interpret the X data as a time/date, parsed with the given format

=item

C<--colormap>

Show a colormapped xy plot. Requires extra data for the color. zmin/zmax can be
used to set the extents of the colors. Automatically sets the C<--rangesize>.

=item

C<--stream [period]>

Plot the data as it comes in, in realtime. If period is given, replot every
period seconds. If no period is given, replot at 1Hz. If the period is given as
0 or 'trigger', replot I<only> when the incoming data dictates this. See the
L</"Real-time streaming data"> section of the man page.

=item

C<--[no]lines>

Do [not] draw lines to connect consecutive points

=item

C<--[no]points>

Do [not] draw points

=item

C<--circles>

Plot with circles. This requires a radius be specified for each point.
Automatically sets the C<--rangesize>. C<Not> supported for 3d plots.

=item

C<--title xxx>

Set the title of the plot

=item

C<--legend curveID legend>

Set the label for a curve plot. Use this option multiple times for multiple
curves. With C<--dataid>, curveID is the ID. Otherwise, it's the index of the
curve, starting at 0

=item

C<--autolegend>

Use the curve IDs for the legend. Titles given with C<--legend> override these

=item

C<--xlen xxx>

When using C<--stream>, sets the size of the x-window to plot. Omit this or set
it to 0 to plot ALL the data. Does not make sense with 3d plots. Implies
C<--monotonic>

=item

C<--xmin/xmax/ymin/ymax/y2min/y2max/zmin/zmax xxx>

Set the range for the given axis. These x-axis bounds are ignored in a streaming
plot. The y2-axis bound do not apply in 3d plots. The z-axis bounds apply
I<only> to 3d plots or colormaps.

=item

C<--xlabel/ylabel/y2label/zlabel xxx>

Label the given axis. The y2-axis label does not apply to 3d plots while the
z-axis label applies I<only> to 3d plots.

=item

C<--y2 xxx>

Plot the data specified by this curve ID on the y2 axis. Without C<--dataid>,
the ID is just an ordered 0-based index. Does not apply to 3d plots. Can be
passed multiple times, or passed a comma-separated list. By default the y2-axis
curves look the same as the y-axis ones. I.e. the viewer of the resulting plot
has to be told which is which via an axes label, legend, etc. Prior to version
1.25 of feedgnuplot the curves plotted on the y2 axis were drawn with a thicker
line. This is no longer the case, but that behavior can be brought back by
passing something like

 --y2 curveid --style curveid 'linewidth 3'

=item

C<--histogram curveID>


Set up a this specific curve to plot a histogram. The bin width is given with
the C<--binwidth> option (assumed 1.0 if omitted). C<--histogram> does I<not>
touch the drawing style. It is often desired to plot these with boxes, and this
I<must> be explicitly requested by C<--with boxes>. This works with C<--domain>
and/or C<--stream>, but in those cases the x-value is used I<only> to cull old
data because of C<--xlen> or C<--monotonic>. I.e. the x-values are I<not> drawn
in any way. Can be passed multiple times, or passed a comma- separated list

=item

C<--binwidth width>

The width of bins when making histograms. This setting applies to ALL histograms
in the plot. Defaults to 1.0 if not given.

=item

C<--histstyle style>

Normally, histograms are generated with the 'smooth freq' gnuplot style.
C<--histstyle> can be used to select different 'smooth' settings. Allowed are
'unique', 'cumulative' and 'cnormal'. 'unique' indicates whether a bin has at
least one item in it: instead of counting the items, it'll always report 0 or 1.
'cumulative' is the integral of the "normal" histogram. 'cnormal' is like
'cumulative', but rescaled to end up at 1.0.

=item

C<--style curveID style>

Additional styles per curve. With C<--dataid>, curveID is the ID. Otherwise,
it's the index of the curve, starting at 0. Use this option multiple times for
multiple curves. C<--styleall> does I<not> apply to curves that have a
C<--style>

=item

C<--curvestyle curveID>

Synonym for C<--style>

=item

C<--styleall xxx>

Additional styles for all curves that have no C<--style>. This is overridden by
any applicable C<--style>. Exclusive with C<--with>.

=item

C<--curvestyleall xxx>

Synonym for C<--styleall>

=item

C<--with xxx>

Same as C<--styleall>, but prefixed with "with". Thus

 --with boxes

is equivalent to

 --styleall 'with boxes'

Exclusive with C<--styleall>.

=item

C<--extracmds xxx>

Additional commands to pass on to gnuplot verbatim. These could contain extra
global styles for instance. Can be passed multiple times.

=item

C<--set xxx>

Additional 'set' commands to pass on to gnuplot verbatim. C<--set 'a b c'> will
result in gnuplot seeing a C<set a b c> command. Can be passed multiple times.

=item

C<--unset xxx>

Additional 'unset' commands to pass on to gnuplot verbatim. C<--unset 'a b c'>
will result in gnuplot seeing a C<unset a b c> command. Can be passed multiple
times.

=item

C<--square>

Plot data with aspect ratio 1. For 3D plots, this controls the aspect ratio for
all 3 axes

=item

C<--square_xy>

For 3D plots, set square aspect ratio for ONLY the x,y axes

=item

C<--hardcopy xxx>

If not streaming, output to a file specified here. Format inferred from
filename, unless specified by C<--terminal>

=item

C<--terminal xxx>

String passed to 'set terminal'. No attempts are made to validate this.
C<--hardcopy> sets this to some sensible defaults if --hardcopy is given .png,
.pdf, .ps, .eps or .svg. If any other file type is desired, use both
C<--hardcopy> and C<--terminal>

=item

C<--maxcurves xxx>

The maximum allowed number of curves. This is 100 by default, but can be reset
with this option. This exists purely to prevent perl from allocating all of the
system's memory when reading bogus data

=item

C<--monotonic>

If C<--domain> is given, checks to make sure that the x- coordinate in the input
data is monotonically increasing. If a given x-variable is in the past, all data
currently cached for this curve is purged. Without C<--monotonic>, all data is
kept. Does not make sense with 3d plots. No C<--monotonic> by default. The data is
replotted before being purged

=item

C<--rangesize curveID xxx>

The options C<--rangesizeall>, C<--rangesize> and C<--extraValuesPerPoint> set
the number of values are needed to represent each point being plotted (see
L</"Multi-value style support"> above). These options are I<only> needed if
unknown styles are used, with C<--styleall> or C<--with> for instance.

C<--rangesize> is used to set how many values are needed to represent the range
of a point for a particular curve. This overrides any defaults that may exist
for this curve only.

=item

C<--rangesizeall xxx>

Like C<--rangesize>, but applies to I<all> the curves.

C<--extraValuesPerPoint xxx>

Like C<--rangesizeall>, but instead of overriding the default, adds to it. For
example, if plotting non-lopsided y errorbars gnuplot wants (x,y,ydelta) tuples.
These can be specified both with C<--rangesizeall 2> (because there are 2 range
values) or C<--extraValuesPerPoint 1> (because there's 1 more value than usual).

This option is I<only> needed if unknown styles are used, with C<--styleall> or
C<--with> for instance.

=item

C<--dump>

Instead of printing to gnuplot, print to STDOUT. Very useful for debugging. It
is possible to send the output produced this way to gnuplot directly.

=item

C<--exit>

Terminate the feedgnuplot process after passing data to gnuplot. The window will
persist but will not be interactive. Without this option feedgnuplot keeps
running and must be killed by the user. Note that this option works only with
later versions of gnuplot and only with some gnuplot terminals.

=item

C<--geometry>

If using X11, specifies the size, position of the plot window

=item

C<--version>

Print the version and exit

=back

=head1 RECIPES

=head2 Basic plotting of piped data

 $ seq 5 | awk '{print 2*$1, $1*$1}'
 2 1
 4 4
 6 9
 8 16
 10 25

 $ seq 5 | awk '{print 2*$1, $1*$1}' |
   feedgnuplot --lines --points --legend 0 "data 0" --title "Test plot" --y2 1

=head2 Realtime plot of network throughput

Looks at wlan0 on Linux.

 $ while true; do sleep 1; cat /proc/net/dev; done |
   gawk '/wlan0/ {if(b) {print $2-b; fflush()} b=$2}' |
   feedgnuplot --lines --stream --xlen 10 --ylabel 'Bytes/sec' --xlabel seconds

=head2 Realtime plot of battery charge in respect to time

Uses the result of the C<acpi> command.

 $ while true; do acpi; sleep 15; done |
   perl -nE 'BEGIN{ $| = 1; } /([0-9]*)%/; say join(" ", time(), $1);' |
   feedgnuplot --stream --ymin 0 --ymax 100 --lines --domain --xlabel 'Time' --timefmt '%s' --ylabel "Battery charge (%)"

=head2 Realtime plot of temperatures in an IBM Thinkpad

Uses C</proc/acpi/ibm/thermal>, which reports temperatures at various locations
in a Thinkpad.

 $ while true; do cat /proc/acpi/ibm/thermal | awk '{$1=""; print}' ; sleep 1; done |
   feedgnuplot --stream --xlen 100 --lines --autolegend --ymax 100 --ymin 20 --ylabel 'Temperature (deg C)'

=head2 Plotting a histogram of file sizes in a directory

 $ ls -l | awk '{print $5/1e6}' |
   feedgnuplot --histogram 0 --with boxes --ymin 0 --xlabel 'File size (MB)' --ylabel Frequency

=head1 ACKNOWLEDGEMENT

This program is originally based on the driveGnuPlots.pl script from
Thanassis Tsiodras. It is available from his site at
L<http://users.softlab.ece.ntua.gr/~ttsiod/gnuplotStreaming.html>

=head1 REPOSITORY

L<https://github.com/dkogan/feedgnuplot>

=head1 AUTHOR

Dima Kogan, C<< <dima@secretsauce.net> >>

=head1 LICENSE AND COPYRIGHT

Copyright 2011-2012 Dima Kogan.

This program is free software; you can redistribute it and/or modify it
under the terms of either: the GNU General Public License as published
by the Free Software Foundation; or the Artistic License.

See http://dev.perl.org/licenses/ for more information.

=cut