pcp-testsuite 4.0.1-1 / var / lib / pcp / testsuite / 115

#! /bin/sh
# PCP QA Test No. 115
# exercises pmie_check functionality
#
# Copyright (c) 2002 Silicon Graphics, Inc.  All Rights Reserved.
#

seq=`basename $0`
echo "QA output created by $seq"

# get standard environment, filters and checks
. ./common.product
. ./common.filter
. ./common.check

[ -f /etc/gentoo-release ] && _notrun "Gentoo is lacking chkconfig support"
[ -f /etc/slackware-version ] && _notrun "Slackware is lacking chkconfig support"

if [ -z "$PCP_PMIECONTROL_PATH" ]
then
    echo "Error: botched installation - PCP_PMIECONTROL_PATH not defined"
    exit 1
fi

_cleanup()
{
    if $needclean
    then
	_restore_config $PCP_PMIECONTROL_PATH
	_restore_config $PCP_PMCDCONF_PATH
    fi
    $sudo rm -rf $tmp.nogo $tmp.locker
    for file in $tmp.*
    do
	echo >>$here/$seq.full
	echo "=== $file ===" >>$here/$seq.full
	cat $file >>$here/$seq.full
    done
    $sudo rm -f $tmp.*
    _restore_auto_restart pmcd
    _restore_auto_restart pmie
}

status=1	# failure is the default!
$sudo rm -f $tmp.* $seq.full
signal=$PCP_BINADM_DIR/pmsignal
needclean=false
trap "_cleanup; exit \$status" 0 1 2 3 15

_stop_auto_restart pmcd
_stop_auto_restart pmie

lhost=`hostname | sed -e 's/\..*//'`
host=`_get_fqdn`
remote=`./getpmcdhosts -n 1 -L 2>$tmp.out`
rhost=`echo $remote | sed -e 's/\..*//'`
[ -z "$remote" ] && _notrun `cat $tmp.out`
echo "remote=$remote" >>$here/$seq.full

# Now that we have pmmgr in the mix, there is more than one pmie
# potentially running, so lines like this
# ... try /var/lib/pcp/tmp/pmie/25453: different logfile, skip
#  /var/log/pcp/pmmgr/bozo/pmie.log differs to /tmp/SEQ-PID.log1
# are now expected, and not a problem.
#
# mkdir: error lines ... not consistency in format, so cull 'em
# ditto for cd errors reported from pmie_check
#
_filter()
{
    tee -a $here/$seq.full \
    | sed \
	-e "s/$seq-$$/SEQ-PID/g" \
	-e "s;$PCP_BIN_DIR/pmie;\$PCP_BIN_DIR/pmie;" \
	-e 's/line [0-9][0-9]*:/line N:/' \
	-e 's/$/ /' \
	-e 's/\([ "]\)'"$remote"'\([ "]\)/\1REMOTEHOST\2/g' \
	-e 's/\([ "]\)'"$rhost"'\([ "]\)/\1REMOTEHOST\2/g' \
	-e 's/\([ "]\)'"$host"'\([ "]\)/\1LOCALHOST\2/g' \
	-e 's/\([ "]\)local:\([ "]\)/\1LOCALHOST\2/g' \
	-e "s;/private/tmp;/tmp;g" \
	-e '/ try .* different logfile, skip/d' \
	-e '/\/pmmgr\/.* differs to /d' \
	-e '/^.r[-w][-x]r[-w][-x]/s/.* \//... ls output ... /' \
	-e '/mkdir:/d' \
	-e '/\/pmie_check:.*cd:/d' \
	-e 's/[ 	]*$//' \
	-e 's/^[ 	]*//' \
	-e 's/\.\.failed/failed (status=1)/' \
    # end
}

_count_pmies()
{
    count=0
    if [ -d $PCP_TMP_DIR/pmie ] 
    then cd $PCP_TMP_DIR/pmie
    else return 0
    fi

    ls -l >>$here/$seq.full
    plist=`ls -1`
    echo "plist=$plist" >>$here/$seq.full
    cd $here

    for process in $plist
    do
	ps -p $process >/dev/null 2>&1
	if [ $? = 1 ]
	then
	    echo "urk, $PCP_TMP_DIR/pmie/$process has no running pmie instance"
	else
	    count=`expr $count + 1`
	    ps -f -p $process >>$here/$seq.full
	    if `which pstree >/dev/null 2>&1`
	    then
		pstree $process >>$here/$seq.full
	    fi
	fi
    done

    return $count
}

# create a basic pmcd config file
cat >$tmp.pmcd.conf << EOF
# from QA $seq
pmcd	2	dso	pmcd_init	pmda_pmcd.so
EOF

# create a pmie config file
cat >$tmp.conf << EOF
foo = sample.long.one;
doo = sample.long.ten;
EOF

# create pmie control files
cat >$tmp.control.v1.0 << EOF
\$version=1.0
$remote         n $tmp.log1 -c $tmp.conf
$remote         n $tmp.log2 -c $tmp.conf
LOCALHOSTNAME   n $tmp.log0 -c $tmp.conf
EOF
cat >$tmp.control.v1.1 << EOF
\$version=1.1
$remote         n n $tmp.log1 -c $tmp.conf
$remote         n n $tmp.log2 -c $tmp.conf
LOCALHOSTNAME   y n $tmp.log0 -c $tmp.conf
EOF

# real QA test starts here
_save_config $PCP_PMIECONTROL_PATH
_save_config $PCP_PMCDCONF_PATH
needclean=true
$sudo cp $tmp.pmcd.conf $PCP_PMCDCONF_PATH 

$sudo $signal -a -s TERM pmie >/dev/null 2>&1
sleep 1
_change_config pmcd on
_change_config pmie off
$sudo rm -f $PCP_TMP_DIR/pmie/*

_count_pmies
echo "pmie count at start of QA testing: $?" | tee -a $here/$seq.full
echo

echo === check default install operation === | tee -a $here/$seq.full
_service pmie restart 2>&1 | _filter_pmie_start
_count_pmies
# chkconfig no longer controls start-ability, expect non-zero
echo "pmie count after chkconfig pmie off: $?"
echo

echo === check for missing control file === | tee -a $here/$seq.full
_change_config pmie off
$sudo rm -f $PCP_PMIECONTROL_PATH
_change_config pmie on
_service pmie restart 2>&1 | _filter_pmie_start | _filter
_count_pmies
echo "pmie count after attempt without control file: $?"
echo

echo === check pmie_check and custom configs === | tee -a $here/$seq.full
echo "--- v1.0 ---" | tee -a $here/$seq.full
pmie_check -V -V -N -c $tmp.control.v1.0 -l $tmp.log
cat $tmp.log | _filter
rm -f $tmp.log
# don't bother counting pmie processes, as -N is used above!
#
echo
echo "--- v1.1 ---" | tee -a $here/$seq.full
pmie_check -V -V -N -c $tmp.control.v1.1 -l $tmp.log
cat $tmp.log | _filter
rm -f $tmp.log
# don't bother counting pmie processes, as -N is used above!
#
echo

echo "=== warnings ... ===" | tee -a $here/$seq.full
echo "--- stale lock file ---" | tee -a $here/$seq.full
case=1
cat >$tmp.warning.$case << EOF
\$version=1.1
LOCALHOSTNAME   n n $tmp.locker/ok.$case -c $tmp.conf
EOF
mkdir $tmp.locker
touch -t `pmdate -35M %Y%m%d%H%M` $tmp.locker/ok.$case.lock
pmie_check -V -V -N -c $tmp.warning.$case -l $tmp.warning.$case.log
cat $tmp.warning.$case.log | _filter
rm -f $tmp.warning.$case.log
echo
echo "--- existing lock file ---" | tee -a $here/$seq.full
case=`expr $case + 1`
cat >$tmp.warning.$case << EOF
\$version=1.1
LOCALHOSTNAME   n n $tmp.locker/ok.$case -c $tmp.conf
EOF
rm -f $tmp.locker/ok.$case.lock
touch $tmp.locker/ok.$case.lock
$PCP_PS_PROG $PCP_PS_ALL_ARGS | grep '([P]ID)|([p]mie)' >>$here/$seq.full
pmie_check -V -V -N -c $tmp.warning.$case -l $tmp.warning.$case.log
$PCP_PS_PROG $PCP_PS_ALL_ARGS | grep '([P]ID)|([p]mie)' >>$here/$seq.full
cat $tmp.warning.$case.log | _filter
rm -f $tmp.warning.$case.log
echo
echo "--- can't create lock file ---" | tee -a $here/$seq.full
case=`expr $case + 1`
cat >$tmp.warning.$case << EOF
\$version=1.1
LOCALHOSTNAME   n n $tmp.locker/ok.$case -c $tmp.conf
EOF
chmod 555 $tmp.locker
pmie_check -V -V -N -c $tmp.warning.$case -l $tmp.warning.$case.log
cat $tmp.warning.$case.log | _filter
rm -f $tmp.warning.$case.log
$sudo rm -rf $tmp.locker
echo
echo "--- bad in-line shell commands ---" | tee -a $here/$seq.full
case=`expr $case + 1`
cat >$tmp.warning.$case << EOF
\$version=1.1
\$date
\$PATH=/some/where/bad:\$PATH
\$IFS=a
LOCALHOSTNAME   n n $tmp.ok.$case -c $tmp.conf
EOF
pmie_check -V -V -N -c $tmp.warning.$case -l $tmp.warning.$case.log
cat $tmp.warning.$case.log | _filter
rm -f $tmp.warning.$case.log
echo
echo "--- missing \$version but really v1.1 ... original control.local issue ---" | tee -a $here/$seq.full
case=`expr $case + 1`
cat >$tmp.warning.$case << EOF
LOCALHOSTNAME   n n $tmp.ok.$case -c $tmp.conf
EOF
pmie_check -V -V -N -c $tmp.warning.$case -l $tmp.warning.$case.log
cat $tmp.warning.$case.log | _filter
rm -f $tmp.warning.$case.log
echo

echo "=== errors ... ===" | tee -a $here/$seq.full
echo "--- bad version ---" | tee -a $here/$seq.full
case=1
cat >$tmp.error.$case << EOF
\$version=0.0
LOCALHOSTNAME   n $tmp.bad.$case -c $tmp.conf
EOF
pmie_check -V -V -N -c $tmp.error.$case -l $tmp.bad.$case.log
cat $tmp.bad.$case.log | _filter
rm -f $tmp.bad.$case.log
echo
case=`expr $case + 1`
echo "--- v1.0 socks != y|n ---" | tee -a $here/$seq.full
cat >$tmp.error.$case << EOF
\$version=1.0
LOCALHOSTNAME   x $tmp.bad.$case -c $tmp.conf
EOF
pmie_check -V -V -N -c $tmp.error.$case -l $tmp.bad.$case.log
cat $tmp.bad.$case.log | _filter
rm -f $tmp.bad.$case.log
echo
case=`expr $case + 1`
echo "--- v1.1 socks != y|n ---" | tee -a $here/$seq.full
cat >$tmp.error.$case << EOF
\$version=1.1
LOCALHOSTNAME   n x $tmp.bad.$case -c $tmp.conf
EOF
pmie_check -V -V -N -c $tmp.error.$case -l $tmp.bad.$case.log
cat $tmp.bad.$case.log | _filter
rm -f $tmp.bad.$case.log
echo
case=`expr $case + 1`
echo "--- v1.1 primary != y|n ---" | tee -a $here/$seq.full
cat >$tmp.error.$case << EOF
\$version=1.1
LOCALHOSTNAME   x n $tmp.bad.$case -c $tmp.conf
EOF
pmie_check -V -V -N -c $tmp.error.$case -l $tmp.bad.$case.log
cat $tmp.bad.$case.log | _filter
rm -f $tmp.bad.$case.log
echo
case=`expr $case + 1`
echo "--- v1.0 insufficient fields ---" | tee -a $here/$seq.full
cat >$tmp.error.$case << EOF
\$version=1.0
LOCALHOSTNAME   n $tmp.bad.$case
EOF
pmie_check -V -V -N -c $tmp.error.$case -l $tmp.bad.$case.log
cat $tmp.bad.$case.log | _filter
rm -f $tmp.bad.$case.log
echo
case=`expr $case + 1`
echo "--- v1.1 insufficient fields ---" | tee -a $here/$seq.full
cat >$tmp.error.$case << EOF
\$version=1.1
LOCALHOSTNAME   n n $tmp.bad.$case
EOF
pmie_check -V -V -N -c $tmp.error.$case -l $tmp.bad.$case.log
cat $tmp.bad.$case.log | _filter
rm -f $tmp.bad.$case.log
echo
mkdir $tmp.nogo
chmod 000 $tmp.nogo
case=`expr $case + 1`
echo "--- can't create dir for logfile ---" | tee -a $here/$seq.full
cat >$tmp.error.$case << EOF
\$version=1.1
LOCALHOSTNAME   n n $tmp.nogo/subdir/bad.$case -c $tmp.conf
EOF
pmie_check -V -V -N -c $tmp.error.$case -l $tmp.bad.$case.log
cat $tmp.bad.$case.log | _filter
rm -f $tmp.bad.$case.log
echo
case=`expr $case + 1`
echo "--- can't chdir to dir for logfile ---" | tee -a $here/$seq.full
cat >$tmp.error.$case << EOF
\$version=1.1
LOCALHOSTNAME   n n $tmp.nogo/bad.$case -c $tmp.conf
EOF
pmie_check -V -V -N -c $tmp.error.$case -l $tmp.bad.$case.log
cat $tmp.bad.$case.log | _filter
rm -f $tmp.bad.$case.log
echo
$sudo rm -rf $tmp.nogo

_service pmie stop 2>&1 \
| _filter_pmie_start \
| sed \
    -e '/PMIE not running/d' \
    -e '/pmie not running/d' \
# end
_change_config pmie off

status=0
exit