/var/lib/pcp/testsuite/cisco/Serial-1 is in pcp-testsuite 4.0.1-1.
This file is owned by root:root, with mode 0o644.
The actual contents of the file can be viewed below.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 | >
show interface
Serial1 is up, line protocol is up
Hardware is HD64570
Description: Frame-relay, MtV, Hong Kong, Sydney
MTU 1500 bytes, BW 1544 Kbit, DLY 20000 usec, rely 255/255, load 5/255
Encapsulation FRAME-RELAY, loopback not set, keepalive set (10 sec)
LMI enq sent 14998, LMI stat recvd 14885, LMI upd recvd 0, DTE LMI up
LMI enq recvd 0, LMI stat sent 0, LMI upd sent 0
LMI DLCI 0 LMI type is ANSI Annex D frame relay DTE
Broadcast queue 0/200, broadcasts sent/dropped 508604/0
Last input 0:00:00, output 0:00:00, output hang never
Last clearing of "show interface" counters never
Output queue 0/40, 947 drops; input queue 0/75, 0 drops
Five minute input rate 117000 bits/sec, 29 packets/sec
Five minute output rate 32000 bits/sec, 20 packets/sec
2578327 packets input, 1105345262 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants
54 input errors, 4 CRC, 0 frame, 0 overrun, 1 ignored, 4 abort
1975049 packets output, 675844616 bytes, 0 underruns
0 output errors, 0 collisions, 142 interface resets, 0 restarts
3 carrier transitions
DCD=up DSR=up DTR=up RTS=up CTS=up
>
|