/var/lib/pcp/testsuite/cisco/Serial-1-0-min is in pcp-testsuite 4.0.1-1.
This file is owned by root:root, with mode 0o644.
The actual contents of the file can be viewed below.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 | >
show interface
Serial1/0 is up, line protocol is up
Hardware is M4T
Description: frame-relay using subinterfaces
MTU 1500 bytes, BW 64 Kbit, DLY 20000 usec, rely 255/255, load 11/255
Encapsulation FRAME-RELAY, loopback not set, keepalive set (10 sec)
LMI enq sent 10084, LMI stat recvd 9997, LMI upd recvd 0, DTE LMI up
LMI enq recvd 0, LMI stat sent 0, LMI upd sent 0
LMI DLCI 0 LMI type is ANSI Annex D frame relay DTE
FR SVC disabled, LAPF state down
Broadcast queue 0/200, broadcasts sent/dropped 53152/0, interface broadcasts 49826
Last input 00:00:01, output 00:00:00, output hang never
Last clearing of "show interface" counters never
Queueing strategy: fifo
Output queue 0/8, 0 drops; input queue 0/75, 0 drops
5 minute input rate 3000 bits/sec, 4 packets/sec
5 minute output rate 3000 bits/sec, 4 packets/sec
429076 packets input, 132623595 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 1 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
474808 packets output, 73186481 bytes, 0 underruns
0 output errors, 0 collisions, 31 interface resets
0 output buffer failures, 0 output buffers swapped out
35 carrier transitions DCD=up DSR=up DTR=up RTS=up CTS=up
>
|