/var/lib/pcp/testsuite/cisco/Serial-1-0-sec is in pcp-testsuite 4.0.1-1.
This file is owned by root:root, with mode 0o644.
The actual contents of the file can be viewed below.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 | >
show interface
Serial1/0 is up, line protocol is up
Hardware is M4T
Description: frame-relay using subinterfaces
MTU 1500 bytes, BW 64 Kbit, DLY 20000 usec, rely 255/255, load 31/255
Encapsulation FRAME-RELAY, loopback not set, keepalive set (10 sec)
LMI enq sent 39756, LMI stat recvd 39753, LMI upd recvd 0, DTE LMI up
LMI enq recvd 0, LMI stat sent 0, LMI upd sent 0
LMI DLCI 0 LMI type is ANSI Annex D frame relay DTE
FR SVC disabled, LAPF state down
Broadcast queue 0/200, broadcasts sent/dropped 91696/0, interface broadcasts 85069
Last input 00:00:00, output 00:00:00, output hang never
Last clearing of "show interface" counters never
Queueing strategy: fifo
Output queue 0/8, 0 drops; input queue 0/75, 0 drops
30 second input rate 62000 bits/sec, 9 packets/sec
30 second output rate 8000 bits/sec, 5 packets/sec
2238005 packets input, 630502832 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
111 input errors, 108 CRC, 0 frame, 0 overrun, 0 ignored, 3 abort
2274950 packets output, 230325061 bytes, 0 underruns
0 output errors, 0 collisions, 2 interface resets
0 output buffer failures, 0 output buffers swapped out
3 carrier transitions DCD=up DSR=up DTR=up RTS=up CTS=up
>
|