/etc/ax25/uronode.conf is in uronode 2.8.1-1.
This file is owned by root:root, with mode 0o644.
The actual contents of the file can be viewed below.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 | # /etc/ax25/uronode.conf - URONode example configuration file
#
# see uronode.conf(5)
# Idle timeout (seconds).
# This is how long we hold onto a dead link. 0 disables (this is NOT
# recommended! Time is in seconds.
IdleTimeout 900
# Timeout when gatewaying (seconds).
# This (in seconds) is a keep-alive for dead connects out of the node.
ConnTimeout 600
# Visible hostname. Will be shown at telnet login.
# set this to your ampr.org hostname.
HostName xx#xx.ampr.org
# SysOp email address
# Set this to your email address - preferred to use an ampr.org email.
Email <your@email.ampr.org>
# "Local" network.
# This is your local amprnet subnet in full. Do NOT use 44.0.0.0/8!
LocalNet 44.0.0.0/32
# Command aliases. See uronode.conf(5) for the meaning of the uppercase
# letters in the name of the alias. Examples below:
Alias CAllbook "telnet %{3:144.167.99.66} 2000 %1 s"
Alias CONVers "telnet %{2:44.88.0.9} 3600 \"/n %u %{1:1}\""
Alias DXCluster "telnet %{2:44.88.0.9} 9001 %1 s"
Alias WX "telnet %{3:38.102.137.140} %1 s"
# Hidden ports.
# List interfaces you wish not to display. Not suggested.
#HiddenPorts inet
# External commands. See uronode.conf(5) for the meaning of the uppercase
# letters in the name of the extcmd.
#
# Flags: 1 Run command through pipe
# 2 Reconnected flag
# 3 Run through pipe and reconnect
#
ExtCmd NEtstat 1 nobody /bin/netstat netstat --inet
# Node ID.
# This displays before all output texts when the user connects into
# your node via NetRom. Set to "" to leave blank.
# Note: This -must- be defined or will display as "(null)". A space
# is hardcoded in. Example: UROHUB:N1URO-2 do NOT add the bracket
# afterwards "}" this is predefined in URONode.
#
NodeId XXXXXX:XX#XX-#
# Ax25/Flex ID.
# This displays before some strings and at logout to the end user when
# they connect in via ax25 as defined in your ax25d.conf file. If
# you don't define this "(null)" will be presented to the end user. Its
# suggested you take this from your ax25d config which either faces a
# flexnet system OR your 2-meter user interface. Note: do NOT make this
# ssid the same as your NetRom SSID here or in ax25d.conf.
FlexId XX#XX-#
# ROSE ssid@network - if none, enter in: none.
RoseId XX#XX-#@####,######
# Netrom port name. This port is used for outgoing netrom connects.
NrPort nr0
# Syslog Logging level - suggest leaving this at 3 for debugging. 0
# halts logging.
LogLevel 3
# The default escape character (CTRL-T)
#
EscapeChar ^T
|