/usr/share/sdcc/include/mcs51/cc2430.h is in sdcc-libraries 2.9.0-5.
This file is owned by root:root, with mode 0o644.
The actual contents of the file can be viewed below.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 | /*-------------------------------------------------------------------------
Register Declarations for Chipcon CC2430
Written By - Jesus Calvino-Fraga / jesusc at ece.ubc.ca (December 2006)
(Based on CC2430 PRELIMINARY Data Sheet (rev. 1.03) SWRS036A)
This library is free software; you can redistribute it and/or
modify it under the terms of the GNU Lesser General Public
License as published by the Free Software Foundation; either
version 2.1 of the License, or (at your option) any later version.
This library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
Lesser General Public License for more details.
You should have received a copy of the GNU Lesser General Public
License along with this library; if not, write to the Free Software
Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
In other words, you are welcome to use, share and improve this program.
You are forbidden to forbid anyone else to use, share and improve
what you give them. Help stamp out software-hoarding!
-------------------------------------------------------------------------*/
#ifndef REG_CC2430_H
#define REG_CC2430_H
#include <compiler.h>
// Interrupt Vectors
#define RFERR_VECTOR 0 // RF TX FIFO underflow and RX FIFO overflow.
#define ADC_VECTOR 1 // ADC end of conversion
#define URX0_VECTOR 2 // USART0 RX complete
#define URX1_VECTOR 3 // USART1 RX complete
#define ENC_VECTOR 4 // AES encryption/decryption complete
#define ST_VECTOR 5 // Sleep Timer compare
#define P2INT_VECTOR 6 // Port 2 inputs
#define UTX0_VECTOR 7 // USART0 TX complete
#define DMA_VECTOR 8 // DMA transfer complete
#define T1_VECTOR 9 // Timer 1 (16-bit) capture/compare/overflow
#define T2_VECTOR 10 // Timer 2 (MAC Timer)
#define T3_VECTOR 11 // Timer 3 (8-bit) capture/compare/overflow
#define T4_VECTOR 12 // Timer 4 (8-bit) capture/compare/overflow
#define P0INT_VECTOR 13 // Port 0 inputs
#define UTX1_VECTOR 14 // USART1 TX complete
#define P1INT_VECTOR 15 // Port 1 inputs
#define RF_VECTOR 16 // RF general interrupts
#define WDT_VECTOR 17 // Watchdog overflow in timer mode
// SFR Registers and BITs
SFR(P0, 0x80); // Port 0
SBIT(P0_0, 0x80, 0); // Port 0 bit 0
SBIT(P0_1, 0x80, 1); // Port 0 bit 1
SBIT(P0_2, 0x80, 2); // Port 0 bit 2
SBIT(P0_3, 0x80, 3); // Port 0 bit 3
SBIT(P0_4, 0x80, 4); // Port 0 bit 4
SBIT(P0_5, 0x80, 5); // Port 0 bit 5
SBIT(P0_6, 0x80, 6); // Port 0 bit 6
SBIT(P0_7, 0x80, 7); // Port 0 bit 7
SFR(SP, 0x81); // Stack Pointer
SFR(DPL0, 0x82); // Data Pointer 0 Low Byte
SFR(DPH0, 0x83); // Data Pointer 0 High Byte
SFR(DPL1, 0x84); // Data Pointer 1 Low Byte
SFR(DPH1, 0x85); // Data Pointer 1 High Byte
SFR(U0CSR, 0x86); // USART 0 Control and Status
SFR(PCON, 0x87); // Power Mode Control
SFR(TCON, 0x88); // Interrupt Flags
SBIT(IT0, 0x88, 0); // reserved (must always be set to 1)
SBIT(RFERRIF, 0x88, 1); // RFERR � RF TX/RX FIFO interrupt flag
SBIT(IT1, 0x88, 2); // reserved (must always be set to 1)
SBIT(URX0IF, 0x88, 3); // USART0 RX Interrupt Flag
SBIT(ADCIF, 0x88, 5); // ADC Interrupt Flag
SBIT(URX1IF, 0x88, 7); // USART1 RX Interrupt Flag
SFR(P0IFG, 0x89); // Port 0 Interrupt Status Flag
SFR(P1IFG, 0x8A); // Port 1 Interrupt Status Flag
SFR(P2IFG, 0x8B); // Port 2 Interrupt Status Flag
SFR(PICTL, 0x8C); // Port Interrupt Control
SFR(P1IEN, 0x8D); // Port 1 Interrupt Mask
SFR(P0INP, 0x8F); // Port 0 Input Mode
SFR(P1, 0x90); // Port 1
SBIT(P1_0, 0x90, 0); // Port 1 bit 0
SBIT(P1_1, 0x90, 1); // Port 1 bit 1
SBIT(P1_2, 0x90, 2); // Port 1 bit 2
SBIT(P1_3, 0x90, 3); // Port 1 bit 3
SBIT(P1_4, 0x90, 4); // Port 1 bit 4
SBIT(P1_5, 0x90, 5); // Port 1 bit 5
SBIT(P1_6, 0x90, 6); // Port 1 bit 6
SBIT(P1_7, 0x90, 7); // Port 1 bit 7
SFR(RFIM, 0x91); // RF Interrupt Mask
SFR(DPS, 0x92); // Data Pointer Select
SFR(MPAGE, 0x93); // Memory Page Select
SFR(_XPAGE, 0x93); // Memory Page Select under the name SDCC needs it
SFR(T2CMP, 0x94); // Timer 2 Compare Value
SFR(ST0, 0x95); // Sleep Timer 0
SFR(ST1, 0x96); // Sleep Timer 1
SFR(ST2, 0x97); // Sleep Timer 2
SFR(S0CON, 0x98); // Interrupt Flags 2
SBIT(ENCIF_0, 0x98, 0); // AES Interrupt Flag 0
SBIT(ENCIF_1, 0x98, 1); // AES Interrupt Flag 1
SFR(IEN2, 0x9A); // Interrupt Enable 2
SFR(S1CON, 0x9B); // Interrupt Flags 3
SFR(T2PEROF0, 0x9C); // Timer 2 Overflow Capture/Compare 0
SFR(T2PEROF1, 0x9D); // Timer 2 Overflow Capture/Compare 1
SFR(T2PEROF2, 0x9E); // Timer 2 Overflow Capture/Compare 2
SFR(P2, 0xA0); // Port 2
SBIT(P2_0, 0xA0, 0); // Port 2 bit 0
SBIT(P2_1, 0xA0, 1); // Port 2 bit 1
SBIT(P2_2, 0xA0, 2); // Port 2 bit 2
SBIT(P2_3, 0xA0, 3); // Port 2 bit 3
SBIT(P2_4, 0xA0, 4); // Port 2 bit 4
SBIT(P2_5, 0xA0, 5); // Port 2 bit 5
SBIT(P2_6, 0xA0, 6); // Port 2 bit 6
SBIT(P2_7, 0xA0, 7); // Port 2 bit 7
SFR(T2OF0, 0xA1); // Timer 2 Overflow Count 0
SFR(T2OF1, 0xA2); // Timer 2 Overflow Count 1
SFR(T2OF2, 0xA3); // Timer 2 Overflow Count 2
SFR(T2CAPLPL, 0xA4); // Timer 2 Period Low Byte
SFR(T2CAPHPH, 0xA5); // Timer 2 Period High Byte
SFR(T2TLD, 0xA6); // Timer 2 Timer Value Low Byte
SFR(T2THD, 0xA7); // Timer 2 Timer Value High Byte
SFR(IEN0, 0xA8); // Interrupt Enable 0
SBIT(RFERRIE, 0xA8, 0); // RF TX/RX FIFO interrupt enable
SBIT(ADCIE, 0xA8, 1); // ADC Interrupt Enable
SBIT(URX0IE, 0xA8, 2); // USART0 RX Interrupt Enable
SBIT(URX1IE, 0xA8, 3); // USART1 RX Interrupt Enable
SBIT(ENCIE, 0xA8, 4); // AES Encryption/Decryption Interrupt Enable
SBIT(STIE, 0xA8, 5); // Sleep Timer Interrupt Enable
SBIT(EA, 0xA8, 7); // Global Interrupt Enable
SFR(IP0, 0xA9); // Interrupt Priority 0
SFR(FWT, 0xAB); // Flash Write Timing
SFR(FADDRL, 0xAC); // Flash Address Low Byte
SFR(FADDRH, 0xAD); // Flash Address High Byte
SFR(FCTL, 0xAE); // Flash Control
SFR(FWDATA, 0xAF); // Flash Write Data
SFR(ENCDI, 0xB1); // Encryption Input Data
SFR(ENCDO, 0xB2); // Encryption Output Data
SFR(ENCCS, 0xB3); // Encryption Control and Status
SFR(ADCCON1, 0xB4); // ADC Control 1
SFR(ADCCON2, 0xB5); // ADC Control 2
SFR(ADCCON3, 0xB6); // ADC Control 3
SFR(IEN1, 0xB8); // Interrupt Enable 1
SBIT(DMAIE, 0xB8, 0); // DMA Transfer Interrupt Enable
SBIT(T1IE, 0xB8, 1); // Timer 1 Interrupt Enable
SBIT(T2IE, 0xB8, 2); // Timer 2 Interrupt Enable
SBIT(T3IE, 0xB8, 3); // Timer 3 Interrupt Enable
SBIT(T4IE, 0xB8, 4); // Timer 4 Interrupt Enable
SBIT(P0IE, 0xB8, 5); // Port 0 Interrupt Enable
SFR(IP1, 0xB9); // Interrupt Priority 1
SFR(ADCL, 0xBA); // ADC Data Low
SFR(ADCH, 0xBB); // ADC Data High
SFR(RNDL, 0xBC); // Random Number Generator Data Low Byte
SFR(RNDH, 0xBD); // Random Number Generator Data High Byte
SFR(SLEEP, 0xBE); // Sleep Mode Control
SFR(IRCON, 0xC0); // Interrupt Flags 4
SBIT(DMAIF, 0xC0, 0); // DMA Complete Interrupt Flag
SBIT(T1IF, 0xC0, 1); // Timer 1 Interrupt Flag
SBIT(T2IF, 0xC0, 2); // Timer 2 Interrupt Flag
SBIT(T3IF, 0xC0, 3); // Timer 3 Interrupt Flag
SBIT(T4IF, 0xC0, 4); // Timer 4 Interrupt Flag
SBIT(P0IF, 0xC0, 5); // Port 0 Interrupt Flag
SBIT(STIF, 0xC0, 7); // Sleep Timer Interrupt Flag
SFR(U0DBUF, 0xC1); // USART 0 Receive/Transmit Data Buffer
SFR(U0BAUD, 0xC2); // USART 0 Baud Rate Control
SFR(T2CNF, 0xC3); // Timer 2 Configuration
SFR(U0UCR, 0xC4); // USART 0 UART Control
SFR(U0GCR, 0xC5); // USART 0 Generic Control
SFR(CLKCON, 0xC6); // Clock Control
SFR(MEMCTR, 0xC7); // Memory Arbiter Control
SFR(WDCTL, 0xC9); // Watchdog Timer Control
SFR(T3CNT, 0xCA); // Timer 3 Counter
SFR(T3CTL, 0xCB); // Timer 3 Control
SFR(T3CCTL0, 0xCC); // Timer 3 Channel 0 Capture/Compare Control
SFR(T3CC0, 0xCD); // Timer 3 Channel 0 Capture/Compare Value
SFR(T3CCTL1, 0xCE); // Timer 3 Channel 1 Capture/Compare Control
SFR(T3CC1, 0xCF); // Timer 3 Channel 1 Capture/Compare Value
SFR(PSW, 0xD0); // Program Status Word
SBIT(P, 0xD0, 0); // Parity Flag
SBIT(F1, 0xD0, 1); // User-Defined Flag
SBIT(OV, 0xD0, 2); // Overflow Flag
SBIT(RS0, 0xD0, 3); // Register Bank Select 0
SBIT(RS1, 0xD0, 4); // Register Bank Select 1
SBIT(F0, 0xD0, 5); // User-Defined Flag
SBIT(AC, 0xD0, 6); // Auxiliary Carry Flag
SBIT(CY, 0xD0, 7); // Carry Flag
SFR(DMAIRQ, 0xD1); // DMA Interrupt Flag
SFR(DMA1CFGL, 0xD2); // DMA Channel 1-4 Configuration Address Low Byte
SFR(DMA1CFGH, 0xD3); // DMA Channel 1-4 Configuration Address High Byte
SFR(DMA0CFGL, 0xD4); // DMA Channel 0 Configuration Address Low Byte
SFR(DMA0CFGH, 0xD5); // DMA Channel 0 Configuration Address High Byte
SFR(DMAARM, 0xD6); // DMA Channel Arm
SFR(DMAREQ, 0xD7); // DMA Channel Start Request and Status
SFR(TIMIF, 0xD8); // Timers 1/3/4 Interrupt Mask/Flag
SBIT(T3OVFIF, 0xD8, 0); // Timer 3 overflow interrupt flag 0:no pending 1:pending
SBIT(T3CH0IF, 0xD8, 1); // Timer 3 channel 0 interrupt flag 0:no pending 1:pending
SBIT(T3CH1IF, 0xD8, 2); // Timer 3 channel 1 interrupt flag 0:no pending 1:pending
SBIT(T4OVFIF, 0xD8, 3); // Timer 4 overflow interrupt flag 0:no pending 1:pending
SBIT(T4CH0IF, 0xD8, 4); // Timer 4 channel 0 interrupt flag 0:no pending 1:pending
SBIT(T4CH1IF, 0xD8, 5); // Timer 4 channel 1 interrupt flag 0:no pending 1:pending
SBIT(OVFIM, 0xD8, 6); // Timer 1 overflow interrupt mask
SFR(RFD, 0xD9); // RF Data
SFR(T1CC0L, 0xDA); // Timer 1 Channel 0 Capture/Compare Value Low
SFR(T1CC0H, 0xDB); // Timer 1 Channel 0 Capture/Compare Value High
SFR(T1CC1L, 0xDC); // Timer 1 Channel 1 Capture/Compare Value Low
SFR(T1CC1H, 0xDD); // Timer 1 Channel 1 Capture/Compare Value High
SFR(T1CC2L, 0xDE); // Timer 1 Channel 2 Capture/Compare Value Low
SFR(T1CC2H, 0xDF); // Timer 1 Channel 2 Capture/Compare Value High
SFR(ACC, 0xE0); // Accumulator
SBIT(ACC_0, 0xE0, 0); // Accumulator bit 0
SBIT(ACC_1, 0xE0, 1); // Accumulator bit 1
SBIT(ACC_2, 0xE0, 2); // Accumulator bit 2
SBIT(ACC_3, 0xE0, 3); // Accumulator bit 3
SBIT(ACC_4, 0xE0, 4); // Accumulator bit 4
SBIT(ACC_5, 0xE0, 5); // Accumulator bit 5
SBIT(ACC_6, 0xE0, 6); // Accumulator bit 6
SBIT(ACC_7, 0xE0, 7); // Accumulator bit 7
SFR(RFST, 0xE1); // RF CSMA-CA / Strobe Processor
SFR(T1CNTL, 0xE2); // Timer 1 Counter Low
SFR(T1CNTH, 0xE3); // Timer 1 Counter High
SFR(T1CTL, 0xE4); // Timer 1 Control and Status
SFR(T1CCTL0, 0xE5); // Timer 1 Channel 0 Capture/Compare Control
SFR(T1CCTL1, 0xE6); // Timer 1 Channel 1 Capture/Compare Control
SFR(T1CCTL2, 0xE7); // Timer 1 Channel 2 Capture/Compare Control
SFR(IRCON2, 0xE8); // Interrupt Flags 5
SBIT(P2IF, 0xE8, 0); // Port 2 Interrupt Flag
SBIT(UTX0IF, 0xE8, 1); // USART0 TX Interrupt Flag
SBIT(UTX1IF, 0xE8, 2); // USART1 TX Interrupt Flag
SBIT(P1IF, 0xE8, 3); // Port 1 Interrupt Flag
SBIT(WDTIF, 0xE8, 4); // Watchdog Timer Interrupt Flag
SFR(RFIF, 0xE9); // RF Interrupt Flags
SFR(T4CNT, 0xEA); // Timer 4 Counter
SFR(T4CTL, 0xEB); // Timer 4 Control
SFR(T4CCTL0, 0xEC); // Timer 4 Channel 0 Capture/Compare Control
SFR(T4CC0, 0xED); // Timer 4 Channel 0 Capture/Compare Value
SFR(T4CCTL1, 0xEE); // Timer 4 Channel 1 Capture/Compare Control
SFR(T4CC1, 0xEF); // Timer 4 Channel 1 Capture/Compare Value
SFR(B, 0xF0); // B Register
SBIT(B_0, 0xF0, 0); // Register B bit 0
SBIT(B_1, 0xF0, 1); // Register B bit 1
SBIT(B_2, 0xF0, 2); // Register B bit 2
SBIT(B_3, 0xF0, 3); // Register B bit 3
SBIT(B_4, 0xF0, 4); // Register B bit 4
SBIT(B_5, 0xF0, 5); // Register B bit 5
SBIT(B_6, 0xF0, 6); // Register B bit 6
SBIT(B_7, 0xF0, 7); // Register B bit 7
SFR(PERCFG, 0xF1); // Peripheral Control
SFR(ADCCFG, 0xF2); // ADC Input Configuration
SFR(P0SEL, 0xF3); // Port 0 Function Select
SFR(P1SEL, 0xF4); // Port 1 Function Select
SFR(P2SEL, 0xF5); // Port 2 Function Select
SFR(P1INP, 0xF6); // Port 1 Input Mode
SFR(P2INP, 0xF7); // Port 2 Input Mode
SFR(U1CSR, 0xF8); // USART 1 Control and Status
SBIT(ACTIVE, 0xF8, 0); // USART transmit/receive active status 0:idle 1:busy
SBIT(TX_BYTE, 0xF8, 1); // Transmit byte status 0:Byte not transmitted 1:Last byte transmitted
SBIT(RX_BYTE, 0xF8, 2); // Receive byte status 0:No byte received 1:Received byte ready
SBIT(ERR, 0xF8, 3); // UART parity error status 0:No error 1:parity error
SBIT(FE, 0xF8, 4); // UART framing error status 0:No error 1:incorrect stop bit level
SBIT(SLAVE, 0xF8, 5); // SPI master or slave mode select 0:master 1:slave
SBIT(RE, 0xF8, 6); // UART receiver enable 0:disabled 1:enabled
SBIT(MODE, 0xF8, 7); // USART mode select 0:SPI 1:UART
SFR(U1DBUF, 0xF9); // USART 1 Receive/Transmit Data Buffer
SFR(U1BAUD, 0xFA); // USART 1 Baud Rate Control
SFR(U1UCR, 0xFB); // USART 1 UART Control
SFR(U1GCR, 0xFC); // USART 1 Generic Control
SFR(P0DIR, 0xFD); // Port 0 Direction
SFR(P1DIR, 0xFE); // Port 1 Direction
SFR(P2DIR, 0xFF); // Port 2 Direction
// From Table 45 : Overview of RF registers
SFRX(MDMCTRL0H, 0xDF02); // Modem Control 0, high
SFRX(MDMCTRL0L, 0xDF03); // Modem Control 0, low
SFRX(MDMCTRL1H, 0xDF04); // Modem Control 1, high
SFRX(MDMCTRL1L, 0xDF05); // Modem Control 1, low
SFRX(RSSIH, 0xDF06); // RSSI and CCA Status and Control, high
SFRX(RSSIL, 0xDF07); // RSSI and CCA Status and Control, low
SFRX(SYNCWORDH, 0xDF08); // Synchronisation Word Control, high
SFRX(SYNCWORDL, 0xDF09); // Synchronisation Word Control, low
SFRX(TXCTRLH, 0xDF0A); // Transmit Control, high
SFRX(TXCTRLL, 0xDF0B); // Transmit Control, low
SFRX(RXCTRL0H, 0xDF0C); // Receive Control 0, high
SFRX(RXCTRL0L, 0xDF0D); // Receive Control 0, low
SFRX(RXCTRL1H, 0xDF0E); // Receive Control 1, high
SFRX(RXCTRL1L, 0xDF0F); // Receive Control 1, low
SFRX(FSCTRLH, 0xDF10); // Frequency Synthesizer Control and Status, high
SFRX(FSCTRLL, 0xDF11); // Frequency Synthesizer Control and Status, low
SFRX(CSPX, 0xDF12); // CSP X Data
SFRX(CSPY, 0xDF13); // CSP Y Data
SFRX(CSPZ, 0xDF14); // CSP Z Data
SFRX(CSPCTRL, 0xDF15); // CSP Control
SFRX(CSPT, 0xDF16); // CSP T Data
SFRX(RFPWR, 0xDF17); // RF Power Control
SFRX(FSMTCH, 0xDF20); // Finite State Machine Time Constants, high
SFRX(FSMTCL, 0xDF21); // Finite State Machine Time Constants, low
SFRX(MANANDH, 0xDF22); // Manual AND Override, high
SFRX(MANANDL, 0xDF23); // Manual AND Override, low
SFRX(MANORH, 0xDF24); // Manual OR Override, high
SFRX(MANORL, 0xDF25); // Manual OR Override, low
SFRX(AGCCTRLH, 0xDF26); // AGC Control, high
SFRX(AGCCTRLL, 0xDF27); // AGC Control, low
SFRX(FSMSTATE, 0xDF39); // Finite State Machine State Status
SFRX(ADCTSTH, 0xDF3A); // ADC Test, high
SFRX(ADCTSTL, 0xDF3B); // ADC Test, low
SFRX(DACTSTH, 0xDF3C); // DAC Test, high
SFRX(DACTSTL, 0xDF3D); // DAC Test, low
SFRX(IEEE_ADDR0, 0xDF43); // IEEE Address 0
SFRX(IEEE_ADDR1, 0xDF44); // IEEE Address 1
SFRX(IEEE_ADDR2, 0xDF45); // IEEE Address 2
SFRX(IEEE_ADDR3, 0xDF46); // IEEE Address 3
SFRX(IEEE_ADDR4, 0xDF47); // IEEE Address 4
SFRX(IEEE_ADDR5, 0xDF48); // IEEE Address 5
SFRX(IEEE_ADDR6, 0xDF49); // IEEE Address 6
SFRX(IEEE_ADDR7, 0xDF4A); // IEEE Address 7
SFRX(PANIDH, 0xDF4B); // PAN Identifier, high
SFRX(PANIDL, 0xDF4C); // PAN Identifier, low
SFRX(SHORTADDRH, 0xDF4D); // Short Address, high
SFRX(SHORTADDRL, 0xDF4E); // Short Address, low
SFRX(IOCFG0, 0xDF4F); // I/O Configuration 0
SFRX(IOCFG1, 0xDF50); // I/O Configuration 1
SFRX(IOCFG2, 0xDF51); // I/O Configuration 2
SFRX(IOCFG3, 0xDF52); // I/O Configuration 3
SFRX(RXFIFOCNT, 0xDF53); // RX FIFO Count
SFRX(FSMTC1, 0xDF54); // Finite State Machine Control
SFRX(CHVER, 0xDF60); // Chip Version
SFRX(CHIPID, 0xDF61); // Chip Identification
SFRX(RFSTATUS, 0xDF62); // RF Status
// SFRs also accesible through XDATA space
SFRX(X_U0CSR, 0xDF86); // USART 0 Control and Status
SFRX(X_P0IFG, 0xDF89); // Port 0 Interrupt Status Flag
SFRX(X_P1IFG, 0xDF8A); // Port 1 Interrupt Status Flag
SFRX(X_P2IFG, 0xDF8B); // Port 2 Interrupt Status Flag
SFRX(X_PICTL, 0xDF8C); // Port Interrupt Control
SFRX(X_P1IEN, 0xDF8D); // Port 1 Interrupt Mask
SFRX(X_P0INP, 0xDF8F); // Port 0 Input Mode
SFRX(X_RFIM, 0xDF91); // RF Interrupt Mask
SFRX(X_MPAGE, 0xDF93); // Memory Page Select
SFRX(X_T2CMP, 0xDF94); // Timer 2 Compare Value
SFRX(X_ST0, 0xDF95); // Sleep Timer 0
SFRX(X_ST1, 0xDF96); // Sleep Timer 1
SFRX(X_ST2, 0xDF97); // Sleep Timer 2
SFRX(X_T2PEROF0, 0xDF9C); // Timer 2 Overflow Capture/Compare 0
SFRX(X_T2PEROF1, 0xDF9D); // Timer 2 Overflow Capture/Compare 1
SFRX(X_T2PEROF2, 0xDF9E); // Timer 2 Overflow Capture/Compare 2
SFRX(X_T2OF0, 0xDFA1); // Timer 2 Overflow Count 0
SFRX(X_T2OF1, 0xDFA2); // Timer 2 Overflow Count 1
SFRX(X_T2OF2, 0xDFA3); // Timer 2 Overflow Count 2
SFRX(X_T2CAPLPL, 0xDFA4); // Timer 2 Period Low Byte
SFRX(X_T2CAPHPH, 0xDFA5); // Timer 2 Period High Byte
SFRX(X_T2TLD, 0xDFA6); // Timer 2 Timer Value Low Byte
SFRX(X_T2THD, 0xDFA7); // Timer 2 Timer Value High Byte
SFRX(X_FWT, 0xDFAB); // Flash Write Timing
SFRX(X_FADDRL, 0xDFAC); // Flash Address Low Byte
SFRX(X_FADDRH, 0xDFAD); // Flash Address High Byte
SFRX(X_FCTL, 0xDFAE); // Flash Control
SFRX(X_FWDATA, 0xDFAF); // Flash Write Data
SFRX(X_ENCDI, 0xDFB1); // Encryption Input Data
SFRX(X_ENCDO, 0xDFB2); // Encryption Output Data
SFRX(X_ENCCS, 0xDFB3); // Encryption Control and Status
SFRX(X_ADCCON1, 0xDFB4); // ADC Control 1
SFRX(X_ADCCON2, 0xDFB5); // ADC Control 2
SFRX(X_ADCCON3, 0xDFB6); // ADC Control 3
SFRX(X_ADCL, 0xDFBA); // ADC Data Low
SFRX(X_ADCH, 0xDFBB); // ADC Data High
SFRX(X_RNDL, 0xDFBC); // Random Number Generator Data Low Byte
SFRX(X_RNDH, 0xDFBD); // Random Number Generator Data High Byte
SFRX(X_SLEEP, 0xDFBE); // Sleep Mode Control
SFRX(X_U0DBUF, 0xDFC1); // USART 0 Receive/Transmit Data Buffer
SFRX(X_U0BAUD, 0xDFC2); // USART 0 Baud Rate Control
SFRX(X_T2CNF, 0xDFC3); // Timer 2 Configuration
SFRX(X_U0UCR, 0xDFC4); // USART 0 UART Control
SFRX(X_U0GCR, 0xDFC5); // USART 0 Generic Control
SFRX(X_CLKCON, 0xDFC6); // Clock Control
SFRX(X_MEMCTR, 0xDFC7); // Memory Arbiter Control
SFRX(X_WDCTL, 0xDFC9); // Watchdog Timer Control
SFRX(X_T3CNT, 0xDFCA); // Timer 3 Counter
SFRX(X_T3CTL, 0xDFCB); // Timer 3 Control
SFRX(X_T3CCTL0, 0xDFCC); // Timer 3 Channel 0 Capture/Compare Control
SFRX(X_T3CC0, 0xDFCD); // Timer 3 Channel 0 Capture/Compare Value
SFRX(X_T3CCTL1, 0xDFCE); // Timer 3 Channel 1 Capture/Compare Control
SFRX(X_T3CC1, 0xDFCF); // Timer 3 Channel 1 Capture/Compare Value
SFRX(X_DMAIRQ, 0xDFD1); // DMA Interrupt Flag
SFRX(X_DMA1CFGL, 0xDFD2); // DMA Channel 1-4 Configuration Address Low Byte
SFRX(X_DMA1CFGH, 0xDFD3); // DMA Channel 1-4 Configuration Address High Byte
SFRX(X_DMA0CFGL, 0xDFD4); // DMA Channel 0 Configuration Address Low Byte
SFRX(X_DMA0CFGH, 0xDFD5); // DMA Channel 0 Configuration Address High Byte
SFRX(X_DMAARM, 0xDFD6); // DMA Channel Arm
SFRX(X_DMAREQ, 0xDFD7); // DMA Channel Start Request and Status
SFRX(X_TIMIF, 0xDFD8); // Timers 1/3/4 Interrupt Mask/Flag
SFRX(X_RFD, 0xDFD9); // RF Data
SFRX(X_T1CC0L, 0xDFDA); // Timer 1 Channel 0 Capture/Compare Value Low
SFRX(X_T1CC0H, 0xDFDB); // Timer 1 Channel 0 Capture/Compare Value High
SFRX(X_T1CC1L, 0xDFDC); // Timer 1 Channel 1 Capture/Compare Value Low
SFRX(X_T1CC1H, 0xDFDD); // Timer 1 Channel 1 Capture/Compare Value High
SFRX(X_T1CC2L, 0xDFDE); // Timer 1 Channel 2 Capture/Compare Value Low
SFRX(X_T1CC2H, 0xDFDF); // Timer 1 Channel 2 Capture/Compare Value High
SFRX(X_RFST, 0xDFE1); // RF CSMA-CA / Strobe Processor
SFRX(X_T1CNTL, 0xDFE2); // Timer 1 Counter Low
SFRX(X_T1CNTH, 0xDFE3); // Timer 1 Counter High
SFRX(X_T1CTL, 0xDFE4); // Timer 1 Control and Status
SFRX(X_T1CCTL0, 0xDFE5); // Timer 1 Channel 0 Capture/Compare Control
SFRX(X_T1CCTL1, 0xDFE6); // Timer 1 Channel 1 Capture/Compare Control
SFRX(X_T1CCTL2, 0xDFE7); // Timer 1 Channel 2 Capture/Compare Control
SFRX(X_RFIF, 0xDFE9); // RF Interrupt Flags
SFRX(X_T4CNT, 0xDFEA); // Timer 4 Counter
SFRX(X_T4CTL, 0xDFEB); // Timer 4 Control
SFRX(X_T4CCTL0, 0xDFEC); // Timer 4 Channel 0 Capture/Compare Control
SFRX(X_T4CC0, 0xDFED); // Timer 4 Channel 0 Capture/Compare Value
SFRX(X_T4CCTL1, 0xDFEE); // Timer 4 Channel 1 Capture/Compare Control
SFRX(X_T4CC1, 0xDFEF); // Timer 4 Channel 1 Capture/Compare Value
SFRX(X_PERCFG, 0xDFF1); // Peripheral Control
SFRX(X_ADCCFG, 0xDFF2); // ADC Input Configuration
SFRX(X_P0SEL, 0xDFF3); // Port 0 Function Select
SFRX(X_P1SEL, 0xDFF4); // Port 1 Function Select
SFRX(X_P2SEL, 0xDFF5); // Port 2 Function Select
SFRX(X_P1INP, 0xDFF6); // Port 1 Input Mode
SFRX(X_P2INP, 0xDFF7); // Port 2 Input Mode
SFRX(X_U1CSR, 0xDFF8); // USART 1 Control and Status
SFRX(X_U1DBUF, 0xDFF9); // USART 1 Receive/Transmit Data Buffer
SFRX(X_U1BAUD, 0xDFFA); // USART 1 Baud Rate Control
SFRX(X_U1UCR, 0xDFFB); // USART 1 UART Control
SFRX(X_U1GCR, 0xDFFC); // USART 1 Generic Control
SFRX(X_P0DIR, 0xDFFD); // Port 0 Direction
SFRX(X_P1DIR, 0xDFFE); // Port 1 Direction
SFRX(X_P2DIR, 0xDFFF); // Port 2 Direction
#endif //REG_CC2430_H
|