kannel-dev 1.4.3-2fakesync2build1 / usr / include / kannel / gwlib / conn.h

/* ==================================================================== 
 * The Kannel Software License, Version 1.0 
 * 
 * Copyright (c) 2001-2009 Kannel Group  
 * Copyright (c) 1998-2001 WapIT Ltd.   
 * All rights reserved. 
 * 
 * Redistribution and use in source and binary forms, with or without 
 * modification, are permitted provided that the following conditions 
 * are met: 
 * 
 * 1. Redistributions of source code must retain the above copyright 
 *    notice, this list of conditions and the following disclaimer. 
 * 
 * 2. Redistributions in binary form must reproduce the above copyright 
 *    notice, this list of conditions and the following disclaimer in 
 *    the documentation and/or other materials provided with the 
 *    distribution. 
 * 
 * 3. The end-user documentation included with the redistribution, 
 *    if any, must include the following acknowledgment: 
 *       "This product includes software developed by the 
 *        Kannel Group (http://www.kannel.org/)." 
 *    Alternately, this acknowledgment may appear in the software itself, 
 *    if and wherever such third-party acknowledgments normally appear. 
 * 
 * 4. The names "Kannel" and "Kannel Group" must not be used to 
 *    endorse or promote products derived from this software without 
 *    prior written permission. For written permission, please  
 *    contact org@kannel.org. 
 * 
 * 5. Products derived from this software may not be called "Kannel", 
 *    nor may "Kannel" appear in their name, without prior written 
 *    permission of the Kannel Group. 
 * 
 * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESSED OR IMPLIED 
 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 
 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
 * DISCLAIMED.  IN NO EVENT SHALL THE KANNEL GROUP OR ITS CONTRIBUTORS 
 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,  
 * OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT  
 * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR  
 * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,  
 * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE  
 * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,  
 * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 
 * ==================================================================== 
 * 
 * This software consists of voluntary contributions made by many 
 * individuals on behalf of the Kannel Group.  For more information on  
 * the Kannel Group, please see <http://www.kannel.org/>. 
 * 
 * Portions of this software are based upon software originally written at  
 * WapIT Ltd., Helsinki, Finland for the Kannel project.  
 */ 

/*
 * conn.h - declare Connection type to wrap a file descriptor
 *
 * This file defines operations on the Connection type, which provides
 * input and output buffers for a two-way file descriptor, such as a
 * socket or a serial device.
 *
 * The operations are designed for non-blocking use.  Blocking can be
 * done explicitly with conn_wait() or conn_flush().  A thread that
 * blocks in these functions can be woken up with gwthread_wakeup.
 *
 * The write operations will queue the data for sending.  They will
 * try to send whatever data can be sent immediately, if there's enough
 * of it queued.  "Enough" is defined by a value which can be set with
 * conn_set_output_buffering.  The caller must call either conn_wait
 * or conn_flush to actually send the data.
 *
 * The read operations will return whatever data is immediately
 * available.  If none is, then the caller should not simply re-try
 * the request (that would cause a busy-loop); instead, it should
 * wait for more data with conn_wait().
 *
 * The Connection structure has internal locks, so it can be shared
 * safely between threads.  There is a race condition in the interface,
 * however, that can cause threads to wait unnecessarily if there are
 * multiple readers.  But in that case there will always be at least one
 * thread busy reading.
 *
 * The overhead of locking can be avoided by "claiming" a Connection.
 * This means that only one thread will ever do operations on that
 * Connection; the caller must guarantee this.
 *
 * If any operation returns a code that indicates that the connection
 * is broken (due to an I/O error, normally), it will also have closed
 * the connection.  Most operations work only on open connections;
 * not much can be done with a closed connection except destroy it.
 */

typedef struct Connection Connection;

/* If conn_register was called for this connection, a callback function
 * of type conn_callback_t will be called when new input is available,
 * or when all data that was previously queued for output is sent.
 * The data pointer is the one supplied by the caller of conn_register.
 * NOTE: Beware of concurrency issues.  The callback function will run
 * in the fdset's private thread, not in the caller's thread.
 * This also means that if the callback does a lot of work it will slow
 * down the polling process.  This may be good or bad. */
typedef void conn_callback_t(Connection *conn, void *data);

/*
 * If conn_register was called for this connection, a callback data destroyer
 * function will be called if conn_unregister, conn_destroy or conn_register
 * (with different data) called for this connection.
 * This function is responsible to destroy callback data.
 */   
typedef void conn_callback_data_destroyer_t(void *data);

#ifdef HAVE_LIBSSL
/* Open an SSL connection to the given host and port.  Same behavior
 * as conn_open_tcp() below. 'certkeyfile' specifies a PEM-encoded
 * file where OpenSSL looks for a private key and a certificate. 
 */
Connection *conn_open_ssl(Octstr *host, int port, Octstr *certkeyfile, Octstr *our_host);

/* Open an SSL connection to the given host and port.  Same behavior
 * as conn_open_tcp_nb() below. 'certkeyfile' specifies a PEM-encoded
 * file where OpenSSL looks for a private key and a certificate. 
 */
Connection *conn_open_ssl_nb(Octstr *host, int port, Octstr *certkeyfile, Octstr *our_host);

void server_ssl_init(void); /* used by http.c */
#endif /* HAVE_LIBSSL */

/*
 * get the SSL config parameters from the provided Config group.
 * For a non-SSL system this is a no-op that does nothing.
 */
void conn_config_ssl (CfgGroup *grp);


/* Open a TCP/IP connection to the given host and port.  Return the
 * new Connection.  If the connection can not be made, return NULL
 * and log the problem. */
Connection *conn_open_tcp(Octstr *host, int port, Octstr *our_host);

/* As above, but binds our end to 'our_port'. If 'our_port' is 0, uses
 * any port like conn_open_tcp. */
Connection *conn_open_tcp_with_port(Octstr *host, int port, int our_port,
		Octstr *our_host);

/* Open a TCP/IP connection to the given host and port.  Return NULL in case of
 * error. Overwise return new Connection. */
Connection *conn_open_tcp_nb(Octstr *host, int port, Octstr *our_host);

/* As above, but binds our end to 'our_port'. If 'our_port' is 0, uses
 * any port like conn_open_tcp. */
Connection *conn_open_tcp_nb_with_port(Octstr *host, int port, int our_port,
				       Octstr *our_host);

/* Returns 0 if socket is connected, -1 overwise */
int conn_is_connected(Connection *conn);

/* If socket is in the 'connecting' state, it must be listen by poller.
 * After poller returns, connection must be checked for connection 
 * procedure's result. Return 0 if connection done successfully */
int conn_get_connect_result(Connection *conn);

/* Create a Connection structure around the given file descriptor.
 * The file descriptor must not be used for anything else after this;
 * it must always be accessed via the Connection operations.  This
 * operation cannot fail. Second var indicates if the is a SSL enabled
 * connection. */
Connection *conn_wrap_fd(int fd, int ssl);

/* Close and deallocate a Connection.  Log any errors reported by
 * the close operation. */
void conn_destroy(Connection *conn);

/* Assert that the calling thread will be the only one to ever
 * use this Connection.  From now on no locking will be done
 * on this Connection.
 * It is a fatal error for two threads to try to claim one Connection,
 * or for another thread to try to use a Connection that has been claimed.
 */
void conn_claim(Connection *conn);

/* Return the length of the unsent data queued for sending, in octets. */
long conn_outbuf_len(Connection *conn);

/* Return the length of the unprocessed data ready for reading, in octets. */
long conn_inbuf_len(Connection *conn);

/* Return 1 if there was an end-of-file indication from the last read or
 * wait operation. */
int conn_eof(Connection *conn);

/* Return 1 if there was an error indication from the last read or wait
 * operation. */
int conn_error(Connection *conn);

/* Try to write data in chunks of this size or more.  Set it to 0 to
 * get an unbuffered connection.  See the discussion on output buffering
 * at the top of this file for more information. */
void conn_set_output_buffering(Connection *conn, unsigned int size);

/* Register this connection with an FDSet.  This will make it unnecessary
 * to call conn_wait.  Instead, the callback function will be called when
 * there is new data available, or when all data queued for output is
 * sent (note that small amounts are usually sent immediately without
 * queuing, and thus won't trigger the callback).  A connection can be
 * registered with only one FDSet at a time.  Return -1 if it was
 * already registered with a different FDSet, otherwise return 0.
 * A connection can be re-registered with the same FDSet.  This will
 * change only the callback information, and is much more efficient
 * than calling conn_unregister first.
 * NOTE: Using conn_register will always mean that the Connection will be
 * used by more than one thread, so don't also call conn_claim. */
#define conn_register(conn, fdset, callback, data) \
    conn_register_real(conn, fdset, callback, data, NULL)
int conn_register_real(Connection *conn, FDSet *fdset,
    conn_callback_t callback, void *data, conn_callback_data_destroyer_t destroyer);

/*
 * Remove the current registration and call data destroyer if not NULL.
 */ 
void conn_unregister(Connection *conn);

/* Block the thread until one of the following is true:
 *   - The timeout expires
 *   - New data is available for reading
 *   - Some data queued for output is sent (if there was any)
 *   - The thread is woken up via the wakeup interface (in gwthread.h)
 * Return 1 if the timeout expired.  Return 0 otherwise, if the
 * connection is okay.  Return -1 if the connection is broken.
 * If the timeout is 0 seconds, check for the conditions above without
 * actually blocking.  If it is negative, block indefinitely.
 */
int conn_wait(Connection *conn, double seconds);

/* Try to send all data currently queued for output.  Block until this
 * is done, or until the thread is interrupted or woken up.  Return 0
 * if it worked, 1 if there was an interruption, or -1 if the connection
 * is broken. */
int conn_flush(Connection *conn);

/* Output functions.  Each of these takes an open connection and some
 * data, formats the data and queues it for sending.  It may also
 * try to send the data immediately.  The current implementation always
 * does so.
 * Return 0 if the data was sent, 1 if it was queued for sending,
 * and -1 if the connection is broken.
 */
int conn_write(Connection *conn, Octstr *data);
int conn_write_data(Connection *conn, unsigned char *data, long length);
/* Write the length of the octstr as a standard network long, then
 * write the octstr itself. */
int conn_write_withlen(Connection *conn, Octstr *data);

/* Input functions.  Each of these takes an open connection and
 * returns data if it's available, or NULL if it's not.  They will
 * not block.  They will try to read in more data if there's not
 * enough in the buffer to fill the request. */

/* Return whatever data is available. */
Octstr *conn_read_everything(Connection *conn);

/* Return exactly "length" octets of data, if at least that many
 * are available.  Otherwise return NULL.
 */
Octstr *conn_read_fixed(Connection *conn, long length);

/* If the input buffer starts with a full line of data (terminated by
 * LF or CR LF), then return that line as an Octstr and remove it
 * from the input buffer.  Otherwise return NULL.
 */
Octstr *conn_read_line(Connection *conn);

/* Read a standard network long giving the length of the following
 * data, then read the data itself, and pack it into an Octstr and
 * remove it from the input buffer.  Otherwise return NULL.
 */
Octstr *conn_read_withlen(Connection *conn);

/* If the input buffer contains a packet delimited by the "startmark"
 * and "endmark" characters, then return that packet (including the marks)
 * and delete everything up to the end of that packet from the input buffer.
 * Otherwise return NULL.
 * Everything up to the first startmark is discarded.
  */
Octstr *conn_read_packet(Connection *conn, int startmark, int endmark);

#ifdef HAVE_LIBSSL

#include <openssl/x509.h>
#include <openssl/ssl.h>

/* Returns the SSL peer certificate for the given Connection or NULL
 * if none. 
 */
X509 *get_peer_certificate(Connection *conn);

/* These are called to initialize and shutdown the OpenSSL mutex locks.
 * They should be called before the _init_ssl, _shutdown_ssl functions.
 */
void openssl_init_locks(void);
void openssl_shutdown_locks(void);
 
/* These must be called if SSL is used. Currently http.c calls 
 * conn_init_ssl and server_init_ssl from http_init and 
 * conn_shutdown_ssl and server_shutdown_ssl from http_shutdown. 
 */
void conn_init_ssl(void);
void conn_shutdown_ssl(void);
void server_init_ssl(void);
void server_shutdown_ssl(void);

/* Specifies a global PEM-encoded certificate and a private key file 
 * to be used with SSL client connections (outgoing HTTP requests). 
 * conn_init_ssl() must be called first. This checks that the private 
 * key matches with the certificate and will panic if it doesn't.
 */
void use_global_client_certkey_file(Octstr *certkeyfile);

/* Specifies a global PEM-encoded certificate and a private key file 
 * to be used with SSL server connections (incoming HTTP requests). 
 * conn_init_ssl() must be called first. This checks that the private 
 * key matches with the certificate and will panic if it doesn't.
 */
void use_global_server_certkey_file(Octstr *certfile, Octstr *keyfile); 

/* Specifies files containing certificates Kannel is willing to trusted when
 * actins as https clients
 */
void use_global_trusted_ca_file(Octstr *ssl_trusted_ca_file);

/* Configures all global variables for client and server SSL mode 
 * from the values specified within the configuration file.
 */
void conn_config_ssl(CfgGroup *grp);

/* Returns the pointer to the SSL structure of the Connection given.
 * This should be used for determining if certain connections are 
 * SSL enabled outside of the scope of conn.c.
 */
SSL *conn_get_ssl(Connection *conn);


X509 *conn_get_peer_certificate(Connection *conn);
#endif /* HAVE_LIBSSL */

int conn_get_id(Connection *conn);