libopal-dev 3.10.2~dfsg-0ubuntu1 / usr / include / opal / h323 / h323pdu.h

/*
 * h323pdu.h
 *
 * H.323 protocol handler
 *
 * Open H323 Library
 *
 * Copyright (c) 1998-2001 Equivalence Pty. Ltd.
 *
 * The contents of this file are subject to the Mozilla Public License
 * Version 1.0 (the "License"); you may not use this file except in
 * compliance with the License. You may obtain a copy of the License at
 * http://www.mozilla.org/MPL/
 *
 * Software distributed under the License is distributed on an "AS IS"
 * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
 * the License for the specific language governing rights and limitations
 * under the License.
 *
 * The Original Code is Open H323 Library.
 *
 * The Initial Developer of the Original Code is Equivalence Pty. Ltd.
 *
 * Portions of this code were written with the assisance of funding from
 * Vovida Networks, Inc. http://www.vovida.com.
 *
 * Contributor(s): ______________________________________.
 *
 * $Revision: 24880 $
 * $Author: rjongbloed $
 * $Date: 2010-11-18 01:23:46 -0600 (Thu, 18 Nov 2010) $
 */

#ifndef OPAL_H323_H323PDU_H
#define OPAL_H323_H323PDU_H

#ifdef P_USE_PRAGMA
#pragma interface
#endif

#include <opal/buildopts.h>

#if OPAL_H323

#include <ptlib/sockets.h>
#include <h323/h323con.h>
#include <h323/transaddr.h>
#include <h323/q931.h>
#include <h323/h235auth.h>
#include <h323/h323trans.h>
#include <rtp/rtp.h>
#include <asn/h225.h>
#include <asn/h245.h>


class H323Connection;
class H323TransportAddress;
class H225_RAS;
class OpalGloballyUniqueID;


#define H225_PROTOCOL_VERSION 6
#define H245_PROTOCOL_VERSION 13


///////////////////////////////////////////////////////////////////////////////

/**Wrapper class for the H323 signalling channel.
 */
class H323SignalPDU : public H225_H323_UserInformation
{
  PCLASSINFO(H323SignalPDU, H225_H323_UserInformation);

  public:
  /**@name Construction */
  //@{
    /**Create a new H.323 signalling channel (H.225/Q.931) PDU.
     */
    H323SignalPDU();

    /**Build a SETUP message.
      */
    H225_Setup_UUIE & BuildSetup(
      const H323Connection & connection,    ///<  Connection PDU is generated for
      const H323TransportAddress & destAddr ///<  Destination address for packet
    );

    /**Build a CALL-PROCEEDING message.
      */
    H225_CallProceeding_UUIE & BuildCallProceeding(
      const H323Connection & connection    ///<  Connection PDU is generated for
    );

    /**Build a CONNECT message.
      */
    H225_Connect_UUIE & BuildConnect(
      const H323Connection & connection    ///<  Connection PDU is generated for
    );

    /**Build a CONNECT message with H.245 address.
      */
    H225_Connect_UUIE & BuildConnect(
      const H323Connection & connection,    ///<  Connection PDU is generated for
      const PIPSocket::Address & h245Address, ///<  H.245 IP address
      WORD port                               ///<  H.245 TCP port
    );

    /**Build an ALERTING message.
      */
    H225_Alerting_UUIE & BuildAlerting(
      const H323Connection & connection    ///<  Connection PDU is generated for
    );

    /**Build a INFORMATION message.
      */
    H225_Information_UUIE & BuildInformation(
      const H323Connection & connection    ///<  Connection PDU is generated for
    );

    /**Build a RELEASE-COMPLETE message.
      */
    H225_ReleaseComplete_UUIE & BuildReleaseComplete(
      const H323Connection & connection    ///<  Connection PDU is generated for
    );

    /**Build a FACILITY message.
      */
    H225_Facility_UUIE * BuildFacility(
      const H323Connection & connection,  ///<  Connection PDU is generated for
      bool empty,                         ///<  Flag for empty facility message
      unsigned reason = H225_FacilityReason::e_undefinedReason ///< Reason for Facility
    );

    /**Build a PROGRESS message.
      */
    H225_Progress_UUIE & BuildProgress(
      const H323Connection & connection    ///<  Connection PDU is generated for
    );

    /**Build a STATUS message.
      */
    H225_Status_UUIE & BuildStatus(
      const H323Connection & connection    ///<  Connection PDU is generated for
    );

    /**Build a STATUS-INQUIRY message.
      */
    H225_StatusInquiry_UUIE & BuildStatusInquiry(
      const H323Connection & connection    ///<  Connection PDU is generated for
    );

    /**Build a SETUP-ACKNOWLEDGE message.
      */
    H225_SetupAcknowledge_UUIE & BuildSetupAcknowledge(
      const H323Connection & connection    ///<  Connection PDU is generated for
    );

    /**Build a NOTIFY message.
      */
    H225_Notify_UUIE & BuildNotify(
      const H323Connection & connection    ///<  Connection PDU is generated for
    );
  //@}


  /**@name Operations */
  //@{
    /**Print PDU to stream.
      */
    void PrintOn(
      ostream & strm
    ) const;

    /**Read PDU from the specified transport.
      */
    PBoolean Read(
      H323Transport & transport   ///<  Transport to read from
    );

    /**Write the PDU to the transport.
      */
    PBoolean Write(
      H323Transport & transport   ///<  Transport to write to
    );

    /**Get the Q.931 wrapper PDU for H.225 signalling PDU.
      */
    const Q931 & GetQ931() const { return q931pdu; }

    /**Get the Q.931 wrapper PDU for H.225 signalling PDU.
      */
    Q931 & GetQ931() { return q931pdu; }

    /**Set the Q.931 wrapper PDU for H.225 signalling PDU
     */
    void SetQ931(const Q931 & _q931pdu) { q931pdu = _q931pdu; }

    /**Build the Q.931 wrapper PDU for H.225 signalling PDU.
       This must be called after altering fields in the H.225 part of the PDU.
       If it has never been done, then the Write() functions will do so.
      */
    void BuildQ931();

    /**Get the source alias names for the remote endpoint.
       This returns a human readable set of names that was provided by the
       remote endpoint to identify it, eg phone number, display name etc etc
      */
    PString GetSourceAliases(
      const H323Transport * transport = NULL  ///<  Transport PDU was read from.
    ) const;

    /**Get the destination alias name(s) for the local endpoint.
       The alias returned here can be used to determine the routing of an
       incoming connection.
      */
    PString GetDestinationAlias(
      PBoolean firstAliasOnly = false   ///<  Only return the first possible alias
    ) const;

    /**Get the source endpoints identification as a phone number.
       This returns false if the remote never provided any alias or Q.931
       field that indicated a valid e.164 telephone number.
      */
    PBoolean GetSourceE164(
      PString & number    ///<  String to receive number
    ) const;

    /**Get the destiation  phone number.
       This returns false if the remote never provided any alias or Q.931
       field that indicated a valid e.164 telephone number.
      */
    PBoolean GetDestinationE164(
      PString & number    ///<  String to receive number
    ) const;

    /**Get the distinctive ring code if present.
       This returns zero if no distinctive ring information is provided.
      */
    unsigned GetDistinctiveRing() const;

    /**Set the Q.931 fields in the PDU.
       This sets the default values for various fields, eg caller party number
       into the Q.931 from the supplied connection.
      */
    void SetQ931Fields(
      const H323Connection & connection,
      bool insertPartyNumbers = false
    );

#ifdef OPAL_H460
    /** When sending the H460 message in the Setup PDU you have to ensure
        the ARQ is received first then add the Fields to the Setup PDU
    	so we require a call back
      */
    void InsertH460Setup(
      const H323Connection & connection,
      H225_Setup_UUIE & setup
    );
#endif

  protected:
    // Even though we generally deal with the H323 protocol (H225) it is
    // actually contained within a field of the Q931 protocol.
    Q931 q931pdu;
};


/////////////////////////////////////////////////////////////////////////////

/**Wrapper class for the H323 control channel.
 */
class H323ControlPDU : public H245_MultimediaSystemControlMessage
{
  PCLASSINFO(H323ControlPDU, H245_MultimediaSystemControlMessage);

  public:
    H245_RequestMessage    & Build(H245_RequestMessage   ::Choices request);
    H245_ResponseMessage   & Build(H245_ResponseMessage  ::Choices response);
    H245_CommandMessage    & Build(H245_CommandMessage   ::Choices command);
    H245_IndicationMessage & Build(H245_IndicationMessage::Choices indication);

    H245_MasterSlaveDetermination & BuildMasterSlaveDetermination(
      unsigned terminalType,
      unsigned statusDeterminationNumber
    );
    H245_MasterSlaveDeterminationAck & BuildMasterSlaveDeterminationAck(
      PBoolean isMaster
    );
    H245_MasterSlaveDeterminationReject & BuildMasterSlaveDeterminationReject(
      unsigned cause
    );

    H245_TerminalCapabilitySet & BuildTerminalCapabilitySet(
      const H323Connection & connection,
      unsigned sequenceNumber,
      PBoolean empty
    );
    H245_TerminalCapabilitySetAck & BuildTerminalCapabilitySetAck(
      unsigned sequenceNumber
    );
    H245_TerminalCapabilitySetReject & BuildTerminalCapabilitySetReject(
      unsigned sequenceNumber,
      unsigned cause
    );

    H245_OpenLogicalChannel & BuildOpenLogicalChannel(
      unsigned forwardLogicalChannelNumber
    );
    H245_RequestChannelClose & BuildRequestChannelClose(
      unsigned channelNumber,
      unsigned reason
    );
    H245_CloseLogicalChannel & BuildCloseLogicalChannel(
      unsigned channelNumber
    );
    H245_OpenLogicalChannelAck & BuildOpenLogicalChannelAck(
      unsigned channelNumber
    );
    H245_OpenLogicalChannelReject & BuildOpenLogicalChannelReject(
      unsigned channelNumber,
      unsigned cause
    );
    H245_OpenLogicalChannelConfirm & BuildOpenLogicalChannelConfirm(
      unsigned channelNumber
    );
    H245_CloseLogicalChannelAck & BuildCloseLogicalChannelAck(
      unsigned channelNumber
    );
    H245_RequestChannelCloseAck & BuildRequestChannelCloseAck(
      unsigned channelNumber
    );
    H245_RequestChannelCloseReject & BuildRequestChannelCloseReject(
      unsigned channelNumber
    );
    H245_RequestChannelCloseRelease & BuildRequestChannelCloseRelease(
      unsigned channelNumber
    );

    H245_RequestMode & BuildRequestMode(
      unsigned sequenceNumber
    );
    H245_RequestModeAck & BuildRequestModeAck(
      unsigned sequenceNumber,
      unsigned response
    );
    H245_RequestModeReject & BuildRequestModeReject(
      unsigned sequenceNumber,
      unsigned cause
    );

    H245_RoundTripDelayRequest & BuildRoundTripDelayRequest(
      unsigned sequenceNumber
    );
    H245_RoundTripDelayResponse & BuildRoundTripDelayResponse(
      unsigned sequenceNumber
    );

    H245_UserInputIndication & BuildUserInputIndication(
      const PString & value
    );
    H245_UserInputIndication & BuildUserInputIndication(
      char tone,               ///<  DTMF tone code
      unsigned duration,       ///<  Duration of tone in milliseconds
      unsigned logicalChannel, ///<  Logical channel number for RTP sync.
      unsigned rtpTimestamp    ///<  RTP timestamp in logical channel sync.
    );

    H245_MiscellaneousCommand & BuildMiscellaneousCommand(
      unsigned channelNumber,
      unsigned type
    );
    
    H245_FlowControlCommand & BuildFlowControlCommand(
      unsigned channelNumber, 
      unsigned maxBitRate
    );

    H245_MiscellaneousIndication & BuildMiscellaneousIndication(
      unsigned channelNumber,
      unsigned type
    );

    H245_GenericMessage & BuildGenericRequest(
      const PString & identifier,
      unsigned subMsgId
    );
    H245_GenericMessage & BuildGenericResponse(
      const PString & identifier,
      unsigned subMsgId
    );
    H245_GenericMessage & BuildGenericCommand(
      const PString & identifier,
      unsigned subMsgId
    );
    H245_GenericMessage & BuildGenericIndication(
      const PString & identifier,
      unsigned subMsgId
    );

    H245_FunctionNotUnderstood & BuildFunctionNotUnderstood(
      const H323ControlPDU & pdu
    );

    H245_EndSessionCommand & BuildEndSessionCommand(
      unsigned reason
    );
};


/////////////////////////////////////////////////////////////////////////////

/**Wrapper class for the H323 gatekeeper RAS channel.
 */
class H323RasPDU : public H225_RasMessage, public H323TransactionPDU
{
  PCLASSINFO(H323RasPDU, H225_RasMessage);

  public:
    H323RasPDU();
    H323RasPDU(
      const H235Authenticators & authenticators
    );

    // overrides from PObject
    virtual PObject * Clone() const;

    // overrides from H323TransactionPDU
    virtual PASN_Object & GetPDU();
    virtual PASN_Choice & GetChoice();
    virtual const PASN_Object & GetPDU() const;
    virtual const PASN_Choice & GetChoice() const;
    virtual unsigned GetSequenceNumber() const;
    virtual unsigned GetRequestInProgressDelay() const;
#if PTRACING
    virtual const char * GetProtocolName() const;
#endif
    virtual H323TransactionPDU * ClonePDU() const;
    virtual void DeletePDU();

    // new functions
    H225_GatekeeperRequest       & BuildGatekeeperRequest(unsigned seqNum);
    H225_GatekeeperConfirm       & BuildGatekeeperConfirm(unsigned seqNum);
    H225_GatekeeperReject        & BuildGatekeeperReject(unsigned seqNum, unsigned reason = H225_GatekeeperRejectReason::e_undefinedReason);
    H225_RegistrationRequest     & BuildRegistrationRequest(unsigned seqNum);
    H225_RegistrationConfirm     & BuildRegistrationConfirm(unsigned seqNum);
    H225_RegistrationReject      & BuildRegistrationReject(unsigned seqNum, unsigned reason = H225_RegistrationRejectReason::e_undefinedReason);
    H225_UnregistrationRequest   & BuildUnregistrationRequest(unsigned seqNum);
    H225_UnregistrationConfirm   & BuildUnregistrationConfirm(unsigned seqNum);
    H225_UnregistrationReject    & BuildUnregistrationReject(unsigned seqNum, unsigned reason = H225_UnregRejectReason::e_undefinedReason);
    H225_LocationRequest         & BuildLocationRequest(unsigned seqNum);
    H225_LocationConfirm         & BuildLocationConfirm(unsigned seqNum);
    H225_LocationReject          & BuildLocationReject(unsigned seqNum, unsigned reason = H225_LocationRejectReason::e_undefinedReason);
    H225_AdmissionRequest        & BuildAdmissionRequest(unsigned seqNum);
    H225_AdmissionConfirm        & BuildAdmissionConfirm(unsigned seqNum);
    H225_AdmissionReject         & BuildAdmissionReject(unsigned seqNum, unsigned reason = H225_AdmissionRejectReason::e_undefinedReason);
    H225_DisengageRequest        & BuildDisengageRequest(unsigned seqNum);
    H225_DisengageConfirm        & BuildDisengageConfirm(unsigned seqNum);
    H225_DisengageReject         & BuildDisengageReject(unsigned seqNum, unsigned reason = H225_DisengageRejectReason::e_securityDenial);
    H225_BandwidthRequest        & BuildBandwidthRequest(unsigned seqNum);
    H225_BandwidthConfirm        & BuildBandwidthConfirm(unsigned seqNum, unsigned bandwidth = 0);
    H225_BandwidthReject         & BuildBandwidthReject(unsigned seqNum, unsigned reason = H225_BandRejectReason::e_undefinedReason);
    H225_InfoRequest             & BuildInfoRequest(unsigned seqNum, unsigned callRef = 0, const OpalGloballyUniqueID * id = NULL);
    H225_InfoRequestResponse     & BuildInfoRequestResponse(unsigned seqNum);
    H225_InfoRequestAck          & BuildInfoRequestAck(unsigned seqNum);
    H225_InfoRequestNak          & BuildInfoRequestNak(unsigned seqNum, unsigned reason = H225_InfoRequestNakReason::e_undefinedReason);
    H225_ServiceControlIndication& BuildServiceControlIndication(unsigned seqNum, const OpalGloballyUniqueID * id = NULL);
    H225_ServiceControlResponse  & BuildServiceControlResponse(unsigned seqNum);
    H225_UnknownMessageResponse  & BuildUnknownMessageResponse(unsigned seqNum);
    H225_RequestInProgress       & BuildRequestInProgress(unsigned seqNum, unsigned delay);
};


/////////////////////////////////////////////////////////////////////////////

void H323SetAliasAddresses(const H323TransportAddressArray & addresses, H225_ArrayOf_AliasAddress & aliases);
void H323SetAliasAddresses(const PStringArray & names, H225_ArrayOf_AliasAddress & aliases, int tag = -1);
void H323SetAliasAddresses(const PStringList & names, H225_ArrayOf_AliasAddress & aliases, int tag = -1);
void H323SetAliasAddress(const H323TransportAddress & address, H225_AliasAddress & alias);
void H323SetAliasAddress(const PString & name, H225_AliasAddress & alias, int tag = -1);
PStringArray H323GetAliasAddressStrings(const H225_ArrayOf_AliasAddress & aliases);
PString H323GetAliasAddressString(const H225_AliasAddress & alias);
PString H323GetAliasAddressE164(const H225_AliasAddress & alias);
PString H323GetAliasAddressE164(const H225_ArrayOf_AliasAddress & aliases);

H323Connection::CallEndReason H323TranslateToCallEndReason(
  Q931::CauseValues cause,
  unsigned reason
);
Q931::CauseValues H323TranslateFromCallEndReason(
  H323Connection::CallEndReason callEndReason,
  H225_ReleaseCompleteReason & releaseCompleteReason
);

void H323GetApplicationInfo(OpalProductInfo & info, const H225_VendorIdentifier & vendor);

void H323SetRTPPacketization(
  H245_ArrayOf_RTPPayloadType & rtpPacketizations,
  PINDEX & packetizationsCount,
  const OpalMediaFormat & mediaFormat,
  RTP_DataFrame::PayloadTypes payloadType
);
bool H323SetRTPPacketization(
  H245_RTPPayloadType & rtpPacketization,
  const OpalMediaFormat & mediaFormat,
  RTP_DataFrame::PayloadTypes payloadType
);
bool H323SetRTPPacketization(
  H245_RTPPayloadType & rtpPacketization,
  const PString & mediaPacketizationString,
  const OpalMediaFormat & mediaFormat,
  RTP_DataFrame::PayloadTypes payloadType
);
PString H323GetRTPPacketization(
  const H245_RTPPayloadType & rtpPacketization
);

PString H323GetCapabilityIdentifier(
  const H245_CapabilityIdentifier & capId
);
bool H323SetCapabilityIdentifier(
  const PString & str,
  H245_CapabilityIdentifier & capId
);

const H245_ParameterValue * H323GetGenericParameter(
  const H245_ArrayOf_GenericParameter & params,
  unsigned ordinal
);
bool H323GetGenericParameterBoolean(
  const H245_ArrayOf_GenericParameter & params,
  unsigned ordinal
);
unsigned H323GetGenericParameterInteger(
  const H245_ArrayOf_GenericParameter & params,
  unsigned ordinal,
  unsigned defValue = 0,
  H245_ParameterValue::Choices subType = H245_ParameterValue::e_unsignedMin
);
H245_ParameterValue * H323AddGenericParameter(
  H245_ArrayOf_GenericParameter & params,
  unsigned ordinal,
  bool reorder = true
);
void H323AddGenericParameterBoolean(
  H245_ArrayOf_GenericParameter & params,
  unsigned ordinal,
  bool value = true,
  bool reorder = true
);
void H323AddGenericParameterInteger(
  H245_ArrayOf_GenericParameter & params,
  unsigned ordinal,
  unsigned value,
  H245_ParameterValue::Choices subType = H245_ParameterValue::e_unsignedMin,
  bool reorder = true
);
void H323AddGenericParameterString(
  H245_ArrayOf_GenericParameter & params,
  unsigned ordinal,
  const PString & value,
  bool reorder = true
);
void H323AddGenericParameterOctets(
  H245_ArrayOf_GenericParameter & params,
  unsigned ordinal,
  const PBYTEArray & value,
  bool reorder = true
);

#if PTRACING
void H323TraceDumpPDU(
  const char * proto,
  PBoolean writing,
  const PBYTEArray & rawData,
  const PASN_Object & pdu,
  const PASN_Choice & tag1,
  unsigned seqNum
);
#else
#define H323TraceDumpPDU(proto, writing, rawData, pdu, tag1, seqNum)
#endif


#endif // OPAL_H323

#endif // OPAL_H323_H323PDU_H


/////////////////////////////////////////////////////////////////////////////