libprima-perl 1.28-1.1 / usr / lib / perl5 / Prima / PS / Printer.pm

#
#  Copyright (c) 1997-2002 The Protein Laboratory, University of Copenhagen
#  All rights reserved.
#
#  Redistribution and use in source and binary forms, with or without
#  modification, are permitted provided that the following conditions
#  are met:
#  1. Redistributions of source code must retain the above copyright
#     notice, this list of conditions and the following disclaimer.
#  2. Redistributions in binary form must reproduce the above copyright
#     notice, this list of conditions and the following disclaimer in the
#     documentation and/or other materials provided with the distribution.
#
#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
#  ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
#  IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
#  ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
#  FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
#  DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
#  OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
#  HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
#  LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
#  OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
#  SUCH DAMAGE.
#
#  Created by Dmitry Karasik <dk@plab.ku.dk>
#  $Id: Printer.pm,v 1.25 2008/05/06 09:34:03 dk Exp $
#
=pod

=head1 NAME

Prima::PS::Printer - PostScript interface to Prima::Printer

=head1 SYNOPSIS

use Prima;
use Prima::PS::Printer;

=head1 DESCRIPTION

Realizes the Prima printer interface to PostScript level 2 document language
through Prima::PS::Drawable module. Allows different user profiles to be
created and managed with GUI setup dialog. The module is designed to be 
compliant with Prima::Printer interface.

Also contains convenience classes (File, LPR, Pipe) for non-GUI use.

=head1 SYNOPSIS

	use Prima::PS::Printer;

	my $x;
	if ( $preview) {
		$x = Prima::PS::Pipe-> create( command => 'gv -');
	} elsif ( $print_in_file) {
		$x = Prima::PS::File-> create( file => 'out.ps');
	} else {
		$x = Prima::PS::LPR-> create( args => '-Pcolorprinter');
	}
	$x-> begin_doc;
	$x-> font-> size( 300);
	$x-> text_out( "hello!", 100, 100);
	$x-> end_doc;

=cut

use strict;
use Prima;
use Prima::Utils;
use IO::Handle;
use Prima::PS::Drawable;

package Prima::PS::Printer;
use vars qw(@ISA %pageSizes $unix);
@ISA = qw(Prima::PS::Drawable);

$unix = Prima::Application-> get_system_info-> {apc} == apc::Unix;

use constant lpr  => 0;
use constant file => 1;
use constant cmd  => 2;


sub profile_default
{
	my $def = $_[ 0]-> SUPER::profile_default;
	my %prf = (
		resFile       => Prima::Utils::path . '/Printer',
		printer       => undef,
		gui           => 1,
		defaultData   => {
			color          => 1,
			resolution     => 300,
			page           => 'A4',
			copies         => 1,
			scaling        => 1,
			portrait       => 1,
			useDeviceFonts => 1,
			useDeviceFontsOnly => 0,
			spoolerType    => $unix ? lpr : file, 
			spoolerData    => '',
			devParms       => {
				MediaType                   => '', 
				MediaColor                  => '', 
				MediaWeight                 => '',       
				MediaClass                  => '', 
				InsertSheet                 => 0,  
				LeadingEdge                 => 0, 
				ManualFeed                  => 0, 
				TraySwitch                  => 0, 
				MediaPosition               => '', 
				DeferredMediaSelection      => 0, 
				MatchAll                    => 0, 
			},
		},
	);   
	@$def{keys %prf} = values %prf;
	return $def;
}
						

sub init
{
	my $self = shift;
	my %profile = $self-> SUPER::init(@_);
	$self-> {defaultData} = {};
	$self-> {data} = {};
	$self-> $_($profile{$_}) for qw(defaultData resFile);
	$self-> {printers} = {};
	$self-> {gui} = $profile{gui};
	
	my $pr = $profile{printer} if defined $profile{printer};

	if ( open F, $self-> {resFile}) {
		local $/;
		my $fc = '$fc = ' . <F>;
		close F;
		eval "$fc";
		$self-> {printers} = $fc if !$@ && defined($fc) && ref($fc) eq 'HASH';
	}
	
	unless ( scalar keys %{$self-> {printers}}) {
		$self-> {printers}-> {'Default printer'} = deepcopy( $self-> {defaultData});
		if ( $unix) {
			$self-> import_printers( 'printers', '/etc/printcap');
			$self-> {printers}-> {GhostView} = deepcopy( $self-> {defaultData});
			$self-> {printers}-> {GhostView}-> {spoolerType} = cmd;
			$self-> {printers}-> {GhostView}-> {spoolerData} = 'gv -';
		}
		$self-> {printers}-> {File} = deepcopy( $self-> {defaultData});
		$self-> {printers}-> {File}-> {spoolerType} = file;
	}
		

	unless ( defined $pr) {
		if ( defined  $self-> {printers}-> {'Default printer'}) {
			$pr = 'Default printer';
		} else {
			my @k = keys %{$self-> {printers}};
			$pr = $k[0];
		}
	}

	$self-> printer( $pr);
	return %profile;   
}

sub import_printers
{
	my ( $self, $slot, $file) = @_;
	return undef unless open PRINTERS, $file;
	my $np;
	my @names;
	while ( <PRINTERS>) {
		chomp;
		if ( $np) {
			$np = 0 unless /\\\\s*$/;
		} else {
			next if /^\#/ || /^\s*$/;
			push( @names, $1) if m/^([^\|\:]+)/;
			$np = 1 if /\\\s*$/;
		}
	}
	close PRINTERS;

	my @ret;
	for ( @names) {
		s/^\s*//g;
		s/\s*$//g;
		next unless length;
		my $n = "Printer '$_'";
		my $j = 0;
		while ( exists $self-> {$slot}-> {$n}) {
			$n = "Printer '$_' #$j";
			$j++;
		}
		$self-> {$slot}-> {$n} = deepcopy( $self-> {defaultData});
		$self-> {$slot}-> {$n}-> {spoolerType} = lpr;
		$self-> {$slot}-> {$n}-> {spoolerData} = "-P$_";
		push @ret, $n;
	}
	return @ret;
}

sub printers
{
	my $self = $_[0];
	my @res;
	for ( keys %{$self-> {printers}}) {
		my $d = $self-> {printers}-> {$_};
		push @res, {
			name    => $_,
			device  => 
			(( $d-> {spoolerType} == lpr ) ? "lp $d->{spoolerData}"  : 
			(( $d-> {spoolerType} == file) ? 'file' : $d-> {spoolerData})),
			defaultPrinter =>  ( $self-> {current} eq $_) ? 1 : 0,
		},
	}
	return \@res;
}

sub resolution
{
	return $_[0]-> SUPER::resolution unless $#_;
	$_[0]-> raise_ro("resolution") if @_ != 3; # pass inherited call
	shift-> SUPER::resolution( @_);
}

sub resFile
{
	return $_[0]-> {resFile} unless $#_;
	my ( $self, $fn) = @_;
	if ( $fn =~ /^\s*~/) {
		my $home = defined( $ENV{HOME}) ? $ENV{HOME} : '/';
		$fn =~ s/^\s*~/$home/;
	}
	$self-> {resFile} = $fn;
}

sub printer
{
	return $_[0]-> {current} unless $#_;
	my ( $self, $printer) = @_;
	return undef unless exists $self-> {printers}-> {$printer};
	$self-> end_paint_info if $self-> get_paint_state == 2;
	$self-> end_paint if $self-> get_paint_state;
	$self-> {current} = $printer;
	$self-> {data} = {};
	$self-> data( $self-> {defaultData});
	$self-> data( $self-> {printers}-> {$printer});
	$self-> translate( 0, 0);
	return 1;
}

sub data
{
	return $_[0]-> {data} unless $#_;
	my ( $self, $dd) = @_;
	my $dv = $dd-> {devParms};
	my $p = $self-> {data};
	for ( keys %$dd) {
		next if $_ eq 'devParms';
		$p-> {$_} = $dd-> {$_};
	}
	if ( defined $dv) {
		for ( keys %$dv) {
			$p-> {devParms}-> {$_} = $dv-> {$_};
		}
	}
	$self-> SUPER::resolution( $p-> {resolution}, $p-> {resolution}) 
		if exists $dd-> {resolution};
	$self-> scale( $p-> {scaling}, $p-> {scaling}) if exists $dd-> {scaling};
	$self-> reversed( $p-> {portrait} ? 0 : 1) if exists $dd-> {portrait};
	$self-> pageSize( 
		@{exists($pageSizes{$p-> {page}}) ? 
			$pageSizes{$p-> {page}} : $pageSizes{A4}}
	) if exists $dd-> {page};
	if ( exists $dd-> {page}) {
		$self-> useDeviceFonts( $p-> {useDeviceFonts});
		$self-> useDeviceFontsOnly( $p-> {useDeviceFontsOnly});
	}
	if ( defined $dv) {
		my %dp = %{$p-> {devParms}};
		for ( keys %dp) {
			delete $dp{$_} unless length $dp{$_};
		}
		for ( qw( LeadingEdge InsertSheet ManualFeed 
			DeferredMediaSelection TraySwitch MatchAll)) {
			delete $dp{$_} unless $dp{$_};
		}
		$dp{LeadingEdge}-- if exists $dp{LeadingEdge};
		for ( qw( MediaType MediaColor MediaWeight MediaClass)) {
			next unless exists $dp{$_};
			$dp{$_} =~ s/(\\|\(|\))/\\$1/g;
			$dp{$_} = '(' . $dp{$_} . ')';
		}
		for ( qw( InsertSheet ManualFeed TraySwitch 
			DeferredMediaSelection MatchAll)) {
			next unless exists $dp{$_};
			$dp{$_} = $dp{$_} ? 'true' : 'false';
		}
		$self-> pageDevice( \%dp);
	}
	$self-> grayscale( $p-> {color} ? 0 : 1) if exists $dd-> {color};
}

sub defaultData
{
	return $_[0]-> {defaultData} unless $#_;
	my ( $self, $dd) = @_;
	my $dv = $dd-> {devParms};
	delete $dd-> {devParms};
	for ( keys %$dd) {
		$self-> {defaultData}-> {$_} = $dd-> {$_};
	}
	if ( defined $dv) {
		for ( keys %$dv) {
			$self-> {defaultData}-> {devParms}-> {$_} = $dv-> {$_};
		}
	}
}


%pageSizes = ( # in points
	'A0'  => [ 2391, 3381],
	'A1'  => [ 1688, 2391],
	'A2'  => [ 1193, 1688],
	'A3'  => [ 843, 1193],
	'A4'  => [ 596, 843],
	'A5'  => [ 419, 596],
	'A6'  => [ 297, 419],
	'A7'  => [ 209, 297],
	'A8'  => [ 146, 209],
	'A9'  => [ 103, 146],
	'B0'  => [ 2929, 4141],
	'B1'  => [ 2069, 2929],
	'B10' => [ 89, 126],
	'B2'  => [ 1463, 2069],
	'B3'  => [ 1034, 1463],
	'B4'  => [ 729, 1034],
	'B5'  => [ 516, 729],
	'B6'  => [ 362, 516],
	'B7'  => [ 257, 362],
	'B8'  => [ 180, 257],
	'B9'  => [ 126, 180],
	'C5E' => [ 462, 650],
	'US Common #10 Envelope' => [ 297, 684],
	'DLE'       => [ 311, 624],
	'Executive' => [ 541, 721],
	'Folio'     => [ 596, 937],
	'Ledger'    => [ 1227, 792],
	'Legal'     => [ 613, 1011],
	'Letter'    => [ 613, 792],
	'Tabloid'   => [ 792, 1227],
);

sub deepcopy
{
	my %h = %{$_[0]};
	$h{devParms} = {%{$h{devParms}}};
	return \%h;
}

sub setup_dialog
{
	return unless $_[0]-> {gui};
	eval "use Prima::PS::Setup"; die "$@\n" if $@;
	$_[0]-> sdlg_exec;
}

sub begin_doc
{
	my ( $self, $docName) = @_;
	return 0 if $self-> get_paint_state;

	$self-> {spoolHandle} = undef;

	if ( $self-> {data}-> {spoolerType} == file) {
		if ( $self-> {gui}) {
			eval "use Prima::MsgBox"; die "$@\n" if $@;
			my $f = Prima::MsgBox::input_box( 'Print to file', 'Output file name:', '', mb::OKCancel, buttons => {
				mb::OK, { 
				modalResult => undef,
				onClick => sub {
					$_[0]-> clear_event;
					my $f = $_[0]-> owner-> InputLine1-> text;
					if ( -f $f) {
						return 0 if Prima::MsgBox::message(
							"File $f already exists. Overwrite?",
							mb::Warning|mb::OKCancel) != mb::OK;         
					} else {
						unless ( open F, "> $f") {
							Prima::MsgBox::message(
							"Error opening $f:$!", mb::Error|mb::OK);           
							return 0;
						}   
						close F;
						unlink $f;
					} 
					$_[0]-> owner-> modalResult( mb::OK);
					$_[0]-> owner-> end_modal;
			}}});
			return 0 unless defined $f;
			my $h = IO::Handle-> new;
			unless ( open $h, "> $f") {
				undef $h;
				Prima::message("Error opening $f:$!");
				goto AGAIN;
			}
			$self-> {spoolHandle} = $h;
			$self-> {spoolName}   = $f;
		} else { # no gui
			my $h = IO::Handle-> new;
			my $f = $self-> {data}-> {spoolerData};
			unless ( open $h, "> $f") {
				undef $h;
				return 0;
			}
			$self-> {spoolHandle} = $h;
			$self-> {spoolName}   = $f;
		}
		unless ( $self-> SUPER::begin_doc( $docName)) {
			unlink( $self-> {spoolName});
			close( $self-> {spoolHandle});
			return 0;
		}
		return 1;
	}

	return $self-> SUPER::begin_doc( $docName);
}   

my ( $sigpipe);

sub __end
{
	my $self = $_[0];
	close( $self-> {spoolHandle}) if $self-> {spoolHandle};
	if ( $self-> {data}-> {spoolerType} != file) {
		defined($sigpipe) ? $SIG{PIPE} = $sigpipe : delete($SIG{PIPE});
	}
	$self-> {spoolHandle} = undef;
	$sigpipe = undef;
}

sub end_doc
{
	my $self = $_[0];
	$self-> SUPER::end_doc;
	$self-> __end;
}

sub abort_doc
{
	my $self = $_[0];
	$self-> SUPER::abort_doc;
	$self-> __end;
	unlink $self-> {spoolName} if $self-> {data}-> {spoolerType} == file;
}

sub spool
{
	my ( $self, $data) = @_;

	my $piped = 0;
	if ( $self-> {data}-> {spoolerType} != file && !$self-> {spoolHandle}) {
		my @cmds;
		if ( $self-> {data}-> {spoolerType} == lpr) {
			push( @cmds, map { $_ . ' ' . $self-> {data}-> {spoolerData}} qw(
				lp lpr /bin/lp /bin/lpr /usr/bin/lp /usr/bin/lpr));
		} else {
			push( @cmds, $self-> {data}-> {spoolerData});
		} 
		my $ok = 0;
		$sigpipe = $SIG{PIPE};
		$SIG{PIPE} = 'IGNORE';
		CMDS: for ( @cmds) {
			$piped = 0;
			my $f = IO::Handle-> new;
			next unless open $f, "|$_";
			$f-> autoflush(1);
			$piped = 1 unless print $f $data;
			close( $f), next if $piped;
			$ok = 1;
			$self-> {spoolHandle} = $f;
			$self-> {spoolName}   = $_;
			last;
		}
		Prima::message("Error printing to '$cmds[0]'") if !$ok && $self-> {gui};
		return $ok;
	}

	if ( !(print {$self-> {spoolHandle}} $data) || 
			( $piped && $self-> {data}-> {spoolerType} != file )
		) {
		Prima::message( "Error printing to '$self->{spoolName}'") if $self-> {gui};
		return 0;
	}

	return 1;
}

sub options
{
	my $self = shift;

	if ( 0 == @_) {
		return qw(
			Color Resolution PaperSize Copies Scaling Orientation
			UseDeviceFonts UseDeviceFontsOnly
		), keys %{$self->{data}->{devParms}};
	} elsif ( 1 == @_) {
		# get value
		my $v = shift;
		my $d = $self-> {data};
		return $d->{devParms}->{$v} if exists $d->{devParms}->{$v};

		if ( $v eq 'Orientation') {
			return $d->{portrait} ? 'Portrait' : 'Landscape'
		} elsif ( $v eq 'Color') {
			return $d->{color} ? 'Color' : 'Monochrome'
		} else {
			$v = 'page' if $v eq 'PaperSize';
			$v = lcfirst $v;
			return $d-> {$v};
		}
	} else {
		my %newdata;
		my $successfully_set = 0;
		while ( @_ ) {
			# set value
			my ( $opt, $val) = ( shift, shift);
			my $d = $self-> {data};
			if ( exists $d->{devParms}->{$opt}) {
				$newdata{devParms}->{$opt} = $val;
			} elsif ( $opt eq 'Orientation') {
				next unless $val =~ /^(?:(Landscape)|(Portrait))$/;
				$newdata{portrait} = $2 ? 1 : 0;
			} elsif ( $opt eq 'Color') {
				next unless $val =~ /^(?:(Color)|(Monochrome))$/;
				$newdata{color} = $1 ? 1 : 0;
			} else {
				$opt = lcfirst $opt;
				$opt = 'page' if $opt eq 'PaperSize';
				next unless exists $d->{$opt};
				$newdata{$opt} = $val;
			}
			$successfully_set++;
		}
		$self-> data( \%newdata);
		return $successfully_set;
	}
}

package Prima::PS::File;
use vars qw(@ISA);
@ISA=q(Prima::PS::Printer);

sub profile_default
{
	my $def = $_[ 0]-> SUPER::profile_default;
	my %prf = (
		file => 'out.ps',
		gui  => 0,
	);   
	@$def{keys %prf} = values %prf;
	return $def;
}

sub init
{
	my $self = shift;
	my %profile = $self-> SUPER::init(@_);
	$self-> {data}-> {spoolerType} = Prima::PS::Printer::file;
	$self-> {data}-> {spoolerData} = $profile{file};
}

sub file
{
	return $_[0]-> {data}-> {spoolerData} unless $#_;
	$_[0]-> {data}-> {spoolerData} = $_[1];
}

package Prima::PS::LPR;
use vars qw(@ISA);
@ISA=q(Prima::PS::Printer);

sub profile_default
{
	my $def = $_[ 0]-> SUPER::profile_default;
	my %prf = (
		gui  => 0,
		args => '',
	);   
	@$def{keys %prf} = values %prf;
	return $def;
}

sub init
{
	my $self = shift;
	my %profile = $self-> SUPER::init(@_);
	$self-> {data}-> {spoolerType} = Prima::PS::Printer::lpr;
	$self-> {data}-> {spoolerData} = $profile{args};
}

sub args
{
	return $_[0]-> {data}-> {spoolerData} unless $#_;
	$_[0]-> {data}-> {spoolerData} = $_[1];
}

package Prima::PS::Pipe;
use vars qw(@ISA);
@ISA=q(Prima::PS::Printer);

sub profile_default
{
	my $def = $_[ 0]-> SUPER::profile_default;
	my %prf = (
		gui  => 0,
		command => '',
	);   
	@$def{keys %prf} = values %prf;
	return $def;
}

sub init
{
	my $self = shift;
	my %profile = $self-> SUPER::init(@_);
	$self-> {data}-> {spoolerType} = Prima::PS::Printer::cmd;
	$self-> {data}-> {spoolerData} = $profile{command};
}

sub command
{
	return $_[0]-> {data}-> {spoolerData} unless $#_;
	$_[0]-> {data}-> {spoolerData} = $_[1];
}

1;

=pod

=head1 Printer options

Below is the list of options supported by C<options> method:

=over

=item Color STRING

One of : C<Color, Monochrome>

=item Resolution INTEGER

Dots per inch.

=item PageSize STRING

One of: C<AI<integer>, BI<integer>, Executive, Folio, Ledger, Legal, Letter, Tabloid,
US Common #10 Envelope>.

=item Copies INTEGER

=item Scaling FLOAT

1 is 100%, 1.5 is 150%, etc.

=item Orientation

One of : C<Portrait>, C<Landscape>.

=item UseDeviceFonts BOOLEAN

If 1, use limited set of device fonts in addition to exported bitmap fonts.

=item UseDeviceFontsOnly BOOLEAN

If 1, use limited set of device fonts instead of exported bitmap fonts.
Its usage may lead to that some document fonts will be mismatched.

=item MediaType STRING

An arbitrary string representing special attributes of the medium other
than its size, color, and weight. This parameter can be used to identify special
media such as envelopes, letterheads, or preprinted forms.

=item MediaColor STRING

A string identifying the color of the medium.

=item MediaWeight FLOAT

The weight of the medium in grams per square meter. "Basis weight" or
or null "ream weight" in pounds can be converted to grams per square meter by
multiplying by 3.76; for example, 10-pound paper is approximately 37.6
grams per square meter.

=item MediaClass STRING

(Level 3) An arbitrary string representing attributes of the medium
that may require special action by the output device, such as the selection
of a color rendering dictionary. Devices should use the value of this
parameter to trigger such media-related actions, reserving the MediaType
parameter (above) for generic attributes requiring no device-specific action.
The MediaClass entry in the output device dictionary defines the allowable
values for this parameter on a given device; attempting to set it to an unsupported 
value will cause a configuration error.

=item InsertSheet BOOLEAN

(Level 3) A flag specifying whether to insert a sheet of some special
medium directly into the output document. Media coming from a source
for which this attribute is Yes are sent directly to the output bin without
passing through the device's usual imaging mechanism (such as the fuser
assembly on a laser printer). Consequently, nothing painted on the current
page is actually imaged on the inserted medium.   

=item LeadingEdge BOOLEAN

(Level 3) A value specifying the edge of the input medium that will
enter the printing engine or imager first and across which data will be imaged.
Values reflect positions relative to a canonical page in portrait orientation
(width smaller than height). When duplex printing is enabled, the canonical 
page orientation refers only to the front (recto) side of the medium.

=item ManualFeed BOOLEAN

Flag indicating whether the input medium is to be fed manually by a human
operator (Yes) or automatically (No). A Yes value asserts that the
human operator will manually feed media conforming to the specified attributes
( MediaColor, MediaWeight, MediaType, MediaClass, and InsertSheet). Thus, those 
attributes are not used to select from available media sources in the normal way, 
although their values may be presented to the human operator as an aid in selecting 
the correct medium. On devices that offer more than one manual feeding mechanism, 
the attributes may select among them.

=item TraySwitch BOOLEAN

(Level 3)  A flag specifying whether the output device supports
automatic switching of media sources. When the originally selected source
runs out of medium, some devices with multiple media sources can switch
automatically, without human intervention, to an alternate source with the
same attributes (such as PageSize and MediaColor) as the original.   

=item MediaPosition STRING

(Level 3) The position number of the media source to be used.
This parameter does not override the normal media selection process
described in the text, but if specified it will be honored - provided it can
satisfy the input media request in a manner consistent with normal media
selection - even if the media source it specifies is not the best available
match for the requested attributes.

=item DeferredMediaSelection BOOLEAN

(Level 3) A flag determining when to perform media selection.
If Yes, media will be selected by an independent printing subsystem associated
with the output device itself.

=item MatchAll BOOLEAN

A flag specifying whether input media request should match to all
non-null values - MediaColor, MediaWeight etc.

=back

=head1 AUTHOR

Dmitry Karasik, E<lt>dmitry@karasik.eu.orgE<gt>.

=head1 SEE ALSO

L<Prima>, L<Prima::Printer>, L<Prima::Drawable>,