/usr/bin/mkdiskimage is in syslinux-common 3:4.05+dfsg-6+deb8u1.
This file is owned by root:root, with mode 0o755.
The actual contents of the file can be viewed below.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 | #!/usr/bin/perl
## -----------------------------------------------------------------------
##
## Copyright 2002-2008 H. Peter Anvin - All Rights Reserved
## Copyright 2009-2010 Intel Corporation; author: H. Peter Anvin
##
## This program is free software; you can redistribute it and/or modify
## it under the terms of the GNU General Public License as published by
## the Free Software Foundation, Inc., 53 Temple Place Ste 330,
## Boston MA 02111-1307, USA; either version 2 of the License, or
## (at your option) any later version; incorporated herein by reference.
##
## -----------------------------------------------------------------------
#
# Creates a blank MS-DOS formatted hard disk image
#
use bytes;
use integer;
use Fcntl;
use Errno;
use Cwd;
use IO::Handle; # For flush()
sub absolute_path($) {
my($f) = @_;
my($c);
return $f if ( $f =~ /^\// );
$c = cwd();
$c = '' if ( $c eq '/' );
return $c.'/'.$f;
}
sub is_linux() {
return !!eval '{ '.
'use POSIX; '.
'($sysname, $nodename, $release, $version, $machine) = POSIX::uname(); '.
"return \$sysname eq \'Linux\'; }";
}
sub get_random() {
# Get a 32-bit random number
my $rfd, $rnd;
my $rid;
if (open($rfd, "< /dev/urandom\0") && read($rfd, $rnd, 4) == 4) {
$rid = unpack("V", $rnd);
}
close($rfd) if (defined($rfd));
return $rid if (defined($rid));
# This sucks but is better than nothing...
return ($$+time()) & 0xffffffff;
}
sub get_hex_data() {
my $mbr = '';
my $line, $byte;
while ( $line = <DATA> ) {
chomp $line;
last if ($line eq '*');
foreach $byte ( split(/\s+/, $line) ) {
$mbr .= chr(hex($byte));
}
}
return $mbr;
}
$is_linux = is_linux();
if ( $is_linux ) {
# IOCTL numbers
$BLKRRPART = 0x125f;
$BLKGETSIZE = 0x1260;
}
%opt = ();
@args = ();
while (defined($a = shift(@ARGV))) {
if ( $a =~ /^\-/ ) {
foreach $o ( split(//, substr($a,1)) ) {
$opt{$o} = 1;
if ($o eq 'i') {
$id = shift(@ARGV);
}
}
} else {
push(@args, $a);
}
}
($file,$c,$h,$s) = @args;
$c += 0; $h += 0; $s += 0;
$pentry = 1;
$pentry = 2 if ( $opt{'2'} );
$pentry = 3 if ( $opt{'3'} );
$pentry = 4 if ( $opt{'4'} );
if ( $opt{'z'} ) {
$h = $h || 64;
$s = $s || 32;
}
if ( $opt{'M'} && $h && $s ) {
# Specify size in megabytes, not in cylinders
$c = ($c*1024*2)/($h*$s);
}
$is_open = 0;
if ( $c == 0 && $file ne '' ) {
$len = 0;
if ( sysopen(OUTPUT, $file, O_RDWR, 0666) ) {
$is_open = 1;
if ( (@filestat = stat(OUTPUT)) && S_ISREG($filestat[2]) ) {
$len = $filestat[7] >> 9;
} elsif ( $is_linux && S_ISBLK($filestat[2]) ) {
$blksize = pack("L!", 0);
if ( ioctl(OUTPUT, $BLKGETSIZE, $blksize) == 0 ) {
$len = unpack("L!", $blksize); # In 512-byte sectors!
}
}
}
if ( !$len ) {
print STDERR "$0: $file: don't know how to determine the size of this device\n";
exit 1;
}
$c = $len/($h*$s);
}
if ( $file eq '' || $c < 1 || $h < 1 || $h > 256 || $s < 1 || $s > 63 ) {
print STDERR "Usage: $0 [-doFMz4][-i id] file c h s (max: 1024 256 63)\n";
print STDERR " -d add DOSEMU header\n";
print STDERR " -o print filesystem offset to stdout\n";
print STDERR " -F format partition as FAT32\n";
print STDERR " -M \"c\" argument is megabytes, calculate cylinders\n";
print STDERR " -z use zipdisk geometry (h=64 s=32)\n";
print STDERR " -4 use partition entry 4 (standard for zipdisks)\n";
print STDERR " -i specify the MBR ID\n";
print STDERR " -s output a sparse file (don't allocate all blocks)\n";
exit 1;
}
if ($c > 1024) {
print STDERR "Warning: more than 1024 cylinders ($c).\n";
print STDERR "Not all BIOSes will be able to boot this device.\n";
$cc = 1024;
} else {
$cc = $c;
}
$cylsize = $h*$s*512;
if ( !$is_open ) {
sysopen(OUTPUT, $file, O_CREAT|O_RDWR|O_TRUNC, 0666)
or die "$0: Cannot open: $file\n";
}
binmode OUTPUT;
# Print out DOSEMU header, if requested
if ( $opt{'d'} ) {
$emuhdr = "DOSEMU\0" . pack("VVVV", $h, $s, $c, 128);
$emuhdr .= "\0" x (128 - length($emuhdr));
print OUTPUT $emuhdr;
}
# Print the MBR and partition table
$mbr = get_hex_data();
if ( length($mbr) > 440 ) {
die "$0: Bad MBR code\n";
}
$mbr .= "\0" x (440 - length($mbr));
if (defined($id)) {
$id = to_int($id);
} else {
$id = get_random();
}
$mbr .= pack("V", $id); # Offset 440: MBR ID
$mbr .= "\0\0"; # Offset 446: actual partition table
print OUTPUT $mbr;
# Print partition table
$psize = $c*$h*$s-$s;
$bhead = ($h > 1) ? 1 : 0;
$bsect = 1;
$bcyl = ($h > 1) ? 0 : 1;
$ehead = $h-1;
$esect = $s + ((($cc-1) & 0x300) >> 2);
$ecyl = ($cc-1) & 0xff;
if ( $c > 1024 ) {
$fstype = 0x0e;
} elsif ( $psize > 65536 ) {
$fstype = 0x06;
} else {
$fstype = 0x04;
}
for ( $i = 1 ; $i <= 4 ; $i++ ) {
if ( $i == $pentry ) {
print OUTPUT pack("CCCCCCCCVV", 0x80, $bhead, $bsect, $bcyl, $fstype,
$ehead, $esect, $ecyl, $s, $psize);
} else {
print OUTPUT "\0" x 16;
}
}
print OUTPUT "\x55\xaa";
# Output blank file
$totalsize = $c*$h*$s;
$tracks = $c*$h;
# If -s is given, try to simply use truncate...
unless ($opt{'s'} && truncate(OUTPUT, $totalsize)) {
$track = "\0" x (512*$s);
# Print fractional track
print OUTPUT "\0" x (512 * ($s-1));
for ( $i = 1 ; $i < $tracks ; $i++ ) {
print OUTPUT $track;
}
}
# Print mtools temp file
$n = 0;
while ( !defined($tmpdir) ) {
$tmpdir = "/tmp/mkdiskimage.$$.".($n++);
if ( !mkdir($tmpdir, 0700) ) {
die "$0: Failed to make temp directory: $tmpdir\n"
if ( $! != EEXIST );
undef $tmpdir;
}
}
$cfgfile = $tmpdir.'/mtools.conf';
$imglink = $tmpdir.'/disk.img';
die "$0: Failed to create symlink $imglink\n"
if ( !symlink(absolute_path($file), $imglink) );
$header_size = ($opt{'d'} ? 128 : 0);
# Start of filesystem
$offset = $s*512 + $header_size;
# Start of partition table entry
$pstart = $header_size + 446 + 16*($pentry-1);
open(MCONFIG, "> ${cfgfile}") or die "$0: Cannot make mtools config\n";
print MCONFIG "drive z:\n";
print MCONFIG "file=\"${imglink}\"\n";
print MCONFIG "cylinders=${c}\n";
print MCONFIG "heads=${h}\n";
print MCONFIG "sectors=${s}\n";
print MCONFIG "offset=${offset}\n";
print MCONFIG "mformat_only\n";
close(MCONFIG);
# Output the filesystem offset to stdout if appropriate
if ( $opt{'o'} ) {
print $offset, "\n";
}
$ENV{'MTOOLSRC'} = $cfgfile;
if ( $opt{'F'} ) {
system('mformat', '-F', 'z:');
} else {
system('mformat', 'z:');
}
# Clean up in /tmp
unlink($cfgfile);
unlink($imglink);
rmdir($tmpdir);
# MTOOLS doesn't write the bsHiddenSecs field correctly
seek(OUTPUT, $offset + 0x1c, 0);
print OUTPUT pack("V", ($offset-$header_size)>>9);
# Set the partition type
if ( $opt{'F'} ) {
if ( $c > 1024 ) {
$fstype = 0x0c; # FAT32 LBA
} else {
$fstype = 0x0b;
}
} else {
if ( $c > 1024 ) {
$fstype = 0x0e; # FAT16 LBA
} elsif ( $psize > 65536 ) {
$fstype = 0x06; # FAT16 > 32MB
} else {
$fstype = 0x04; # FAT16 <= 32MB
}
seek(OUTPUT, $offset + 0x36, 0);
read(OUTPUT, $fsname, 8);
# FAT12: adjust partition type
if ( $fsname eq 'FAT12 ' ) {
$fstype = 0x01; # FAT12
}
}
seek(OUTPUT, $pstart+4, 0);
print OUTPUT pack("C", $fstype);
flush OUTPUT;
# Just in case this is a block device, try to flush the partition table
if ( $is_linux ) {
ioctl(OUTPUT, $BLKRRPART, 0);
};
exit 0;
__END__
33 c0 fa 8e d8 8e d0 bc 0 7c 89 e6 6 57 8e c0 fb fc bf 0 6 b9 0 1 f3 a5 ea
1f 6 0 0 52 52 b4 41 bb aa 55 31 c9 30 f6 f9 cd 13 72 13 81 fb 55 aa 75 d
d1 e9 73 9 66 c7 6 8d 6 b4 42 eb 15 5a b4 8 cd 13 83 e1 3f 51 f b6 c6 40 f7
e1 52 50 66 31 c0 66 99 e8 66 0 e8 21 1 4d 69 73 73 69 6e 67 20 6f 70 65 72
61 74 69 6e 67 20 73 79 73 74 65 6d 2e d a 66 60 66 31 d2 bb 0 7c 66 52 66
50 6 53 6a 1 6a 10 89 e6 66 f7 36 f4 7b c0 e4 6 88 e1 88 c5 92 f6 36 f8 7b
88 c6 8 e1 41 b8 1 2 8a 16 fa 7b cd 13 8d 64 10 66 61 c3 e8 c4 ff be be 7d
bf be 7 b9 20 0 f3 a5 c3 66 60 89 e5 bb be 7 b9 4 0 31 c0 53 51 f6 7 80 74
3 40 89 de 83 c3 10 e2 f3 48 74 5b 79 39 59 5b 8a 47 4 3c f 74 6 24 7f 3c
5 75 22 66 8b 47 8 66 8b 56 14 66 1 d0 66 21 d2 75 3 66 89 c2 e8 ac ff 72
3 e8 b6 ff 66 8b 46 1c e8 a0 ff 83 c3 10 e2 cc 66 61 c3 e8 62 0 4d 75 6c 74
69 70 6c 65 20 61 63 74 69 76 65 20 70 61 72 74 69 74 69 6f 6e 73 2e d a 66
8b 44 8 66 3 46 1c 66 89 44 8 e8 30 ff 72 13 81 3e fe 7d 55 aa f 85 6 ff bc
fa 7b 5a 5f 7 fa ff e4 e8 1e 0 4f 70 65 72 61 74 69 6e 67 20 73 79 73 74 65
6d 20 6c 6f 61 64 20 65 72 72 6f 72 2e d a 5e ac b4 e 8a 3e 62 4 b3 7 cd 10
3c a 75 f1 cd 18 f4 eb fd 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0 0 0
*
|