/usr/share/chipcard/cards/starcoscard.xml is in libchipcard-data 5.0.3beta-4ubuntu1.
This file is owned by root:root, with mode 0o644.
The actual contents of the file can be viewed below.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 | <!--
These are the known algos for ManageSE
Template ! Algo ! Hash ! Padding
=====================================================
0xb6 ! 0x11 ! SHA-1 ! ISO 9796/2 with random
! ! ! (->SigG v1.0)
! 0x12 ! SHA-1 ! PKCS#1 Block Type 01
! 0x21 ! RIPEMD-160 ! ISO 9796/2 with random
! ! ! (->SigG v1.0)
! 0x22 ! RIPEMD-160 ! PKCS#1 Block Type 01
! 0x25 ! RIPEMD-160 ! ISO9796/1 incl. app A4 (->HBCI)
! 0x26 ! RIPEMD-160 ! '00 ... 00 | Hash'
! 0x32 ! MD-5 ! PKCS#1 Block Type 01
! - ! - ! ISO9796/1 without app A4
0xb8 ! 0x02 ! - ! PKCS#1 Block Type 02
! 0x03 ! - ! '00 ... 00 | Plaintext'
! - ! - ! '00 ... 00 | Plaintext'
-->
<cards>
<card name="STARCOS" extends="ProcessorCard" type="processor" >
<cardinfo>
<name>STARCOS</name>
<descr>
RSA card (card from G and D with STARCOS operating system)
</descr>
<atrs>
<atr> <!-- unknown -->
3B B7 94 00 c0 24 31 fe 65 53 50 4b 32 33 90 00 b4
</atr>
<atr> <!-- 2.1 -->
3B BF 18 00 81 31 70 55 53 54 41 52 43 4F 53 20 53 32 31 20 43 90 00 FA
</atr>
<atr> <!-- 2.2 -->
3B B7 94 00 81 31 FE 65 53 50 4B 32 32 90 00 D0
</atr>
<atr> <!-- 2.3 -->
3B B7 94 00 81 31 fe 65 53 50 4b 32 33 90 00 d1
</atr>
</atrs>
</cardinfo>
<formats>
<format id="KeyLogDescr">
<ELEM name="status" type="byte" >
<DESCR>
code ! key usable ! descr
0x10 ! yes ! key active
0x0a ! no ! inactive, use key with cert
0x08 ! no ! inactive, about to be overwritten
0x07 ! no ! (SK + PK neu beschrieben)
0x02 ! yes ! new key created
0x01 ! yes ! keynumber of -version missing
0x00 ! yes ! INI letter missing to activate
Unused or deleted descriptors should be set to
08-5x-00-00-00-00-00-00
</DESCR>
</ELEM>
<ELEM name="keyType" type="byte" >
<DESCR>
Signkey: 53, Cryptkey: 56
</DESCR>
</ELEM>
<ELEM name="keyNum" type="ascii" size="3" lfiller="0x30" />
<ELEM name="keyVer" type="ascii" size="3" lfiller="0x30" />
<VALUES>
<VALUE path="status">8</VALUE>
<VALUE path="keyNum">0</VALUE>
<VALUE path="keyVer">0</VALUE>
</VALUES>
</format>
</formats>
<commands>
<!-- Select DF by 16-bit-id -->
<command name="SelectDFS" >
<send>
<APDU lr="0" >
<ELEM type="dword">0x00a4000c</ELEM>
</APDU>
<DATA>
<ELEM name="fileId" type="word" />
</DATA>
</send>
<results>
<result sw1="0x6a" sw2="0x82" type="error">File not found</result>
</results>
</command>
<!-- Select DF by application-id -->
<command name="SelectDFL" >
<send>
<APDU lr="0" >
<ELEM type="dword">0x00a4040c</ELEM>
</APDU>
<DATA>
<ELEM name="fileId" type="bytes" />
</DATA>
</send>
<results>
<result sw1="0x6a" sw2="0x82" type="error">File not found</result>
</results>
</command>
<!-- Select EF by id -->
<command name="SelectEFS" >
<send>
<APDU lr="0" >
<ELEM type="dword">0x00a4020c</ELEM>
</APDU>
<DATA>
<ELEM name="fileId" type="word" />
</DATA>
</send>
<results>
<result sw1="0x6a" sw2="0x82" type="error">File not found</result>
</results>
</command>
<!-- Select Master File -->
<command name="SelectMF" >
<send>
<APDU lr="0" >
<ELEM type="dword">0x00a4000c</ELEM>
</APDU>
<DATA>
<ELEM type="word">0x3f00</ELEM>
</DATA>
</send>
<results>
<result sw1="0x6a" sw2="0x82" type="error">File not found</result>
</results>
</command>
<!-- Get PIN Status-->
<command name="PinStatus" >
<send>
<APDU lr="0" >
<ELEM type="word">0x80f2</ELEM>
<ELEM type="byte">0x00</ELEM>
<ELEM name="pid" type="byte" />
</APDU>
</send>
<results>
<result sw1="0x69" sw2="0x83" type="error" >
Card seems to be destroyed, this might have the following reasons:
1) you entered a bad PIN too often
2) the card is of a new and yet unknown type
</result>
</results>
<responses>
<response type="success">
<ELEM name="status" type="byte" size="1" >
<DESCR>
Left nibble : maxmimum number of errors
Right nibble: current number of errors
</DESCR>
</ELEM>
</response>
</responses>
</command>
<!-- Verify PIN -->
<command name="VerifyPin" >
<send>
<APDU >
<ELEM type="word">0x0020</ELEM>
<ELEM type="byte">0x00</ELEM>
<ELEM name="pid" type="byte" />
</APDU>
<DATA>
<ELEM name="pin" type="bytes" size="8" filler="32" />
</DATA>
</send>
<results>
<result sw1="0x63" sw2="0xc0" type="error" >
Bad PIN (only one try left !)
</result>
<result sw1="0x63" type="error" >Bad PIN</result>
<result sw1="0x63" sw2="0xc1" type="error" >
Bad PIN (only two tries left !)
</result>
<result sw1="0x63" sw2="0xc2" type="error" >
Bad PIN (only three tries left !)
</result>
<result sw1="0x69" sw2="0x83" type="error" >
Card seems to be destroyed, this might have the following reasons:
1) you entered a bad PIN too often
2) the card is of a new and yet unknown type
</result>
<result sw1="0x69" sw2="0x85" type="error" >
PIN is still initial PIN, please change it first.
</result>
<result sw1="0x6a" sw2="0x88" type="error" >
Unknown PIN id.
</result>
</results>
</command>
<!-- Modify PIN -->
<command name="ModifyPin" >
<send>
<APDU >
<ELEM type="word">0x0024</ELEM>
<ELEM type="byte">0x00</ELEM>
<ELEM name="pid" type="byte" />
</APDU>
<DATA>
<ELEM name="oldpin" type="bytes" size="8" filler="32" />
<ELEM name="newpin" type="bytes" size="8" filler="32" />
</DATA>
</send>
<results>
<result sw1="0x63" sw2="0xc0" type="error" >
Bad PIN (only one try left !)
</result>
<result sw1="0x63" type="error" >Bad PIN</result>
<result sw1="0x63" sw2="0xc1" type="error" >
Bad PIN (only two tries left !)
</result>
<result sw1="0x63" sw2="0xc2" type="error" >
Bad PIN (only three tries left !)
</result>
<result sw1="0x69" sw2="0x83" type="error" >
Card seems to be destroyed, this might have the following reasons:
1) you entered a bad PIN too often
2) the card is of a new and yet unknown type
</result>
<result sw1="0x69" sw2="0x85" type="error" >
PIN is still initial PIN, please change it first.
</result>
<result sw1="0x6a" sw2="0x88" type="error" >
Unknown PIN id.
</result>
</results>
</command>
<!-- Generate Keypair -->
<command name="GenerateKeyPair" >
<send>
<APDU >
<ELEM type="word">0x0046</ELEM>
<ELEM type="byte">0x00</ELEM>
<ELEM name="kid" type="byte" />
</APDU>
<DATA>
<ELEM name="bits" type="word" />
</DATA>
</send>
<results>
<result sw1="0x69" sw2="0x82" type="error" >
Security status not satisfied (please verify E/G PIN before).
</result>
<result sw1="0x69" sw2="0x85" type="error" >
Condition of use not satisfied.
</result>
<result sw1="0x6a" sw2="0x80" type="error" >
Key length must be divisible by 8.
</result>
</results>
<responses>
<response type="success">
<ELEM name="modulus" type="bytes" />
</response>
</responses>
</command>
<!-- Activate Keypair -->
<command name="ActivateKeyPair" >
<DESCR>
This command activates a previously created key by swapping the
position of the source key and the destination key in EF_IPF.
It then writes the given descriptor of the destination key to
EF_KEY_LOG.
Valid combinations of srcKid and dstKid are:
srcPid ! dstPid ! Status of dstPid ! Info byte (EF_KEY_LOG)
-------!-----------!------------------!-----------------------
0x8e ! 0x86-0x8a ! 0x08 ! Bit 3=1
0x8f ! 0x81-0x85 ! 0x08 ! Bit 7=1
The corresponding bit in the info byte of EF_KEY_LOG and the
corresponding counter in EF_SEQ are reset upon successful
execution.
</DESCR>
<send>
<APDU >
<ELEM type="word">0xf047</ELEM>
<ELEM name="srcKid" type="byte" />
<ELEM name="destKid" type="byte" />
</APDU>
<DATA>
<FORMAT type="KeyLogDescr" name="descriptor" />
</DATA>
</send>
<results>
<result sw1="0x69" sw2="0x82" type="error" >
Security status not satisfied (please verify E/G PIN before).
</result>
<result sw1="0x69" sw2="0x85" type="error" >
Condition of use not satisfied.
</result>
<result sw1="0x6a" sw2="0x80" type="error" >
Bad descriptor data.
</result>
</results>
</command>
<!-- Put Hash -->
<command name="PutHash" >
<DESCR>
This command sends a hash value to the card. The size of this
hash value is 20 for RIPEMD-160 (and maybe 16 for the others?).
</DESCR>
<send>
<APDU >
<ELEM type="dword">0x002a9081</ELEM>
</APDU>
<DATA>
<ELEM name="data" type="bytes" minsize="16" maxsize="20"/>
</DATA>
</send>
</command>
<!-- Sign -->
<command name="Sign" >
<DESCR>
This command signs the hash value sent to the card via PutHash.
</DESCR>
<send>
<APDU lr="0" >
<ELEM type="dword">0x002a9e9a</ELEM>
</APDU>
</send>
<responses>
<response type="success">
<ELEM name="signature" type="bytes" />
</response>
</responses>
</command>
<!-- Verify -->
<command name="Verify" >
<DESCR>
This command verifies whether given the signature is a valid
signature of the hash sent to the card via PutHash.
</DESCR>
<send>
<APDU>
<ELEM type="dword">0x002a00a8</ELEM>
</APDU>
<DATA>
<ELEM name="signature" type="bytes" />
</DATA>
</send>
</command>
<!-- Challenge -->
<command name="Challenge" >
<DESCR>
This command returns a random value.
</DESCR>
<send>
<APDU>
<ELEM type="dword">0x00840000</ELEM>
</APDU>
</send>
<responses>
<response type="success">
<ELEM name="random" type="bytes" />
</response>
</responses>
</command>
</commands>
<!-- generic command responses -->
<results>
<result sw1="0x69" sw2="0x82" type="error" >
Security status not satisfied.
</result>
<result sw1="0x69" sw2="0x85" type="error" >
Condition of use not satisfied.
</result>
<result sw1="0x6a" sw2="0x80" type="error" >
Wrong parameter in data field.
</result>
<result sw1="0x6a" sw2="0x81" type="error" >
Function not supported (wrong parameters P1/P2).
</result>
<result sw1="0x6a" sw2="0x88" type="error" >
Referenced data not found.
</result>
<result sw1="0x6f" sw2="0x01" type="error" >
Public key not complete.
</result>
<result sw1="0x6f" sw2="0x03" type="error" >
Invalid command sequence.
</result>
<result sw1="0x6f" sw2="0x05" type="error" >
No security environment.
</result>
<result sw1="0x6f" sw2="0x08" type="error" >
Signature could not be verified with public key.
</result>
<result sw1="0x6f" sw2="0x0a" type="error" >
Key format list does not match key length.
</result>
</results>
</card>
</cards>
|