maxima-test 5.32.1-1 / usr / share / maxima / 5.32.1 / tests / rtest8.mac

/*************** -*- Mode: MACSYMA; Package: MAXIMA -*-  ******************/
/***************************************************************************
***                                                                    *****
***     Copyright (c) 1984 by William Schelter,University of Texas     *****
***     All rights reserved                                            *****
***************************************************************************/


block([],kill(all),%rnum:0);
0$
x^10-2*x^4+1/2;
x^10-2*x^4+1/2$
nroots(%,-6,9.1);
4$
realroots(x^5-x-1,5.0e-6);
[x = 612003/524288]$
ev(%[1],float);
x = 1.1673030853271484$
ev(x^5-x-1,%);
-7.396496210176906e-6;

/* This failed when a gcl bug set rootsepsilon to 0.0, 2013-10-01 */
realroots(x^3+2*x^2-2*x-1);
[x = -87846643/33554432,x = -12816653/33554432,x = 1];

(2*x+1)^3 = 13.5*(x^5+1);
(2*x+1)^3 = 13.5*(x^5+1)$
sort(allroots(%));
[x = -1.0157555438281209,x = 0.82967499021293611,x = 1.0,
       x = -0.96596251521963683*%i-0.40695972319240747,
       x = 0.96596251521963683*%i-0.40695972319240747];

/* SF bug [ 1951128 ] curious warning from allroots(x=0) */

allroots (x = 0);
[x = 0.0];

allroots (17*x = 0);
[x = 0.0];

allroots (19*x^4 = 0);
[x = 0.0, x = 0.0, x = 0.0, x = 0.0];

allroots (x^3 * (x^4 - 1) = 0);
[x = 0.0, x = 0.0, x = 0.0,
 x = 1.0, x = - 1.0, x = 1.0*%i, x = - 1.0*%i];

allroots (%i*x^5 = 0); /* this one goes through CPOLY-SL */
[x = 0.0, x = 0.0, x = 0.0, x = 0.0, x = 0.0];

/* additional tests for allroots */

allroots (x = 1);
[x = 1.0];

allroots (8*u = 1);
[u = 0.125];

allroots (u^2 - 2*u = 35);
[u = -5.0, u = 7.0];

(complex_float_approx_equal (a, b) :=
    if listp (a) and listp (b)
        then apply ("and", map (complex_float_approx_equal, a, b))
        elseif equationp (a) and equationp (b)
            then is (lhs (a) = lhs (b))
                and complex_float_approx_equal (rhs (a), rhs (b))
            else
                my_float_approx_equal (realpart (a), realpart (b))
                    and my_float_approx_equal (imagpart (a), imagpart (b)),

 equationp (e) := not atom (e) and op (e) = "=",

 my_float_approx_equal (x, y) :=
    if equal (y, 0)
        then is (abs (x) <= float_approx_equal_tolerance)
        else float_approx_equal (x, y),

 float_approx_equal_tolerance : 1e-12,

 0);
0;

/* (u - 5/4)*(u - 7/4)*(u + 1/4)*(u^2 - 2*u + 5/4) which has roots
 * 5/4, 7/4, -1/4, and 1 + %i/2, 1 - %i/2.
 */
complex_float_approx_equal 
   (allroots (u^5 + 131*u^3/16 + 45*u/64 + 175/256 = 19*u^4/4 + 369*u^2/64),
    [u = -0.25, u = 0.5*%i + 1, u = 1 - 0.5*%i, u = 1.25, u = 1.75]);
true;

/* (v - 5/4)*(v - 7/4*%i)*(v + 1/4*%i)*(v^2 - 2*v + 5/4) which has roots
 * 5/4, 7/4*%i, -1/4*%i, and 1 + %i/2, 1 - %i/2.
 */
complex_float_approx_equal
   (allroots (expand ((v - 5/4)*(v - 7/4*%i)*(v + 1/4*%i)*(v^2 - 2*v + 5/4))),
    [v = - 0.25*%i,
     v = 1.25,
     v = 1.0 - 0.5*%i,
     v = 0.5*%i + 1.0,
     v = 1.75*%i]);
true;

reset (float_approx_equal_tolerance);
[float_approx_equal_tolerance];

exp1:x+z = y;
z+x = y$
exp:2*a*x-y = 2*a^2;
2*a*x-y = 2*a^2$
y-2*z = 2;
y-2*z = 2$
ev(linsolve([exp,exp1,%],[x,y,z]),globalsolve);
[x = a+1,y = 2*a,z = a-1]$

/* see http://trac.sagemath.org/sage_trac/ticket/8731 and
http://sourceforge.net/tracker/index.php?func=detail&aid=2990307&group_id=4933&atid=104933 */
algsys([8*x=1],[x])$
[[x = 1/8]]$
block([realonly:true],algsys([8*x=1],[x]))$
[[x = 1/8]]$
algsys([x^2+1],[x])$
[[x = %i], [x = - %i]]$
block([realonly:true],algsys([x^2+1],[x]))$
[]$
/* see http://sourceforge.net/tracker/index.php?func=detail&aid=2786017&group_id=4933&atid=104933 */
algsys([x^4+1],[x])$
[[x = (-1)^(1/4)],[x = -(-1)^(1/4)*%i],[x = -(-1)^(1/4)],[x = (-1)^(1/4)*%i]]$
block([realonly:true],algsys([x^4+1],[x]))$
[]$
algsys([x^4-1],[x])$
[[x = 1],[x = -1],[x = %i],[x = -%i]]$
algsys([x^4-1],[x]),realonly=true $
[[x = 1],[x = -1]]$

block(
  [f1:2*x*(1-l1)-2*(x-1)*l2,
  f2:l2-l1,
  f3:l1*(1-x^2-y),
  f4:l2*(y-(x-1)^2)],
  algsys([f1,f2,f3,f4],[x,y,l1,l2]))$
[[x = 0,y = %r1,l1 = 0,l2 = 0],[x = 1,y = 0,l1 = 1,l2 = 1]]$
block(
  [f1:x^2-y^2,
  f2:x^2-x+2*y^2-y-1],
  algsys([f1,f2],[x,y]))$
[[x = -1/sqrt(3),y = 1/sqrt(3)],[x = 1/sqrt(3),y = -1/sqrt(3)],
 [x = -1/3,y = -1/3],[x = 1,y = 1]]$
solve(asin(cos(3*x))*(f(x)-1),x);
[x = %pi/6,f(x) = 1]$
ev(solve(5^f(x) = 125,f(x)),solveradcan:true);
[f(x) = 3]$

(float_approx_equal_tolerance : 1e-12, 0);
0$

solve([4*x^2-y^2 = 12,x*y-x = 2], [x,y]);
[[x = 2,y = 2],
 [x = 0.5202594388652008*%i-0.1331240357358706,
  y = 0.07678378523787777-3.608003221870287*%i],
 [x = -0.5202594388652008*%i-0.1331240357358706,
  y = 3.608003221870287*%i+0.07678378523787777],
 [x = -1.733751846381093,y = -0.1535675710019696]]$

(reset (float_approx_equal_tolerance), 0);
0$

(eq :1+a*x+x^3, sol : solve(eq,x), makelist(ratsimp(subst(s,eq)),s, sol));
[0,0,0]$

(eq : x^3-1, sol : solve(eq,x), makelist(ratsimp(subst(s,eq)),s,sol));
[0,0,0]$

sol : solve(x^6-1);
[x = (sqrt(3)*%i+1)/2,x = (sqrt(3)*%i-1)/2,x = -1,x = -((sqrt(3)*%i+1)/2), x = -((sqrt(3)*%i-1)/2),x = 1]$

ratsimp(makelist(subst(s, x^6-1), s, sol));
[0,0,0,0,0,0]$

(remvalue(eq, sol),0);
0$

exp:x^2-1;
x^2-1$
solve(%,x);
[x = -1,x = 1]$
ev(exp,%[1]);
0$
h[i,j]:=1/(i+j-1);
h[i,j]:=1/(i+j-1)$
genmatrix(h,3,3);
matrix([1,1/2,1/3],[1/2,1/3,1/4],[1/3,1/4,1/5])$
[2*x-(a-1)*y = 5*b,a*x+b*y+c = 0];
[2*x-(a-1)*y = 5*b,b*y+a*x+c = 0]$
augcoefmatrix(%,[x,y]);
matrix([2,1-a,-5*b],[a,b,c])$
matrix([2,1-a,-5*b],[a,b,c]);
matrix([2,1-a,-5*b],[a,b,c])$

echelon(%);
matrix([1,-((a-1)/2),-(5*b/2)],[0,1,(2*c+5*a*b)/(2*b+a^2-a)])$

matrix([2,1-a,-5*b],[a,b,c]);
matrix([2,1-a,-5*b],[a,b,c])$
triangularize(%);
matrix([2,1-a,-5*b],[0,2*b+a^2-a,2*c+5*a*b])$
matrix([2,1-a,-5*b],[a,b,c]);
matrix([2,1-a,-5*b],[a,b,c])$
rank(%);
2$
a:matrix([3,1],[2,4]);
matrix([3,1],[2,4])$
expand(charpoly(a,lambda));
lambda^2-7*lambda+10$
exp:(programmode:true,solve(%));
[lambda = 5,lambda = 2]$
matrix([x1],[x2]);
matrix([x1],[x2])$
ev(a . %-lambda*%,exp[1]);
matrix([x2-2*x1],[2*x1-x2])$
exp:%[1,1] = 0;
x2-2*x1 = 0$
x1^2+x2^2 = 1;
x2^2+x1^2 = 1$
solve([exp,%],[x1,x2]);
[[x1 = -1/sqrt(5),x2 = -2/sqrt(5)],[x1 = 1/sqrt(5),x2 = 2/sqrt(5)]]$

/* verify that find_root is happy with %e
 * (problem reported on mailing list 2007/01/25)
 */

find_root (2*x = -(log((4 + %e)/(2*%pi)))*(((4 + %e)/(2*%pi))^x), x, -1, 0);
-0.03340289826874122;

find_root (2*x = cos((%e + %pi)*x), x, 0, 1);
0.1984210505656873;

/* verify that find_root evaluates its first argument
 * (problem reported to mailing list 2007/06/07)
 */
(expr : x^2 - 5, find_root (expr, x, 0, 10));
sqrt (5.0);

/* other tests for find_root:
 * verify that find_root expression is returned for non-numeric expression or bounds
 */
(kill (a, b), find_root (x^a - 5, x, 0, 10));
find_root (x^a - 5, x, 0.0, 10.0);

find_root (x^3 - 5, x, a, b);
find_root (x^3 - 5, x, a, b);

quad_closeto(qest,qtru,qtol) :=
  map(lambda([est, tru, tol],
             block([numer:true, abse],
                   abse:abs(est-tru),
                   if (abse <= tol) then true else abse)),
      qest, qtru, qtol);
quad_closeto(qest,qtru,qtol) :=
  map(lambda([est, tru, tol],
             block([numer:true, abse],
                   abse:abs(est-tru),
                   if (abse <= tol) then true else abse)),
      qest, qtru, qtol);

/* verify that find_root nested inside another function call is OK */
quad_closeto(quad_qags (find_root (x^a - 5, x, 0, 10), a, 1, 3),
             quad_qags (5^(1/a), a, 1, 3),
             [1d-15, 5d-15, 0, 0]);
[true,true,true,true];

find_root (find_root (a^2 = x, a, 0, x) = 7, x, 0, 100); /* inner find_root returns sqrt(x) */
49.0;

/* verify that symbolic function name is OK */
(foo (a) := 3^a - 5, bar : foo, find_root (bar, 0, 10));
log(5.0) / log(3.0);

/* example from mailing list 2006/12/01 */
(expr : t = (297 * exp ((1000000 * t) / 33) - 330) / 10000000, find_root (expr, t, 1e-9, 0.003));
1.7549783076857198E-5;

/* example from mailing list 2007/06/07 */
(expr : 6096 * tan((2 * atan(c/(2 * fl))) / r) / (tan((1/60) * (%pi/180))),
 ev (find_root (expr=6096, fl, 1, 10), c=7.176, r=3264));
6.98149293282488;

/* adapted from mailing list 2007/01/13 */

(g (a) := find_root (f (x, a), x, 0, 200),
 f (x, a) := x^a - 5,
 0);
0;

g (0.5);
25.0;

expr : g (z + z);
find_root (x^(2 * z) - 5, x, 0.0, 200.0);

''(at (expr, z=0.25));
25.0;

quad_closeto(quad_qags (g (z), z, 1, 3),
             quad_qags (5^(1/z), z, 1, 3),
             [1d-15, 5d-15, 0, 0]);
[true,true,true,true];

/* adapted from the reference manual */

(f(x) := sin(x) - x/2, 0);
0;

[find_root (sin(x) - x/2, x, 0.1, %pi),
 find_root (sin(x) = x/2, x, 0.1, %pi),
 find_root (f(x), x, 0.1, %pi),
 find_root (f, 0.1, %pi)];
[1.895494267033981, 1.895494267033981, 1.895494267033981, 1.895494267033981];

[find_root (f, 1/(%pi*%e), 2*%pi*sin(%e)),
 find_root (f, log(%pi), %e^%pi),
 find_root (f, exp(1/5), exp(cos(%e + %pi))),
 find_root (f, cos(exp(2))/10, 10*cos(exp(2)))];
[1.895494267033981, 1.895494267033981, 1.895494267033981, 1.895494267033981];

/* adapted from the mailing list 2007/06/10
 * charfun2 copied from the interpol share package
 */

block ([expr],
 charfun2 (z, l1, l2) := charfun (l1 <= z and z < l2),
 expr : (-.329*x^3+.494*x^2 +.559*x+.117) *charfun2(x,minf,1.0)
    +(.215*x^3-1.94*x^2 +4.85*x-2.77) *charfun2(x,2.5,inf) +(.0933*x^3-1.02*x^2
    +2.56*x-.866) *charfun2(x,2.0,2.5) +(.0195*x^3-.581*x^2
    +1.67*x-.275) *charfun2(x,1.5,2.0) +(.00117*x^3-.498*x^2 +1.55*x -.213)
    *charfun2(x,1.0,1.5),
 block ([float_approx_equal_tolerance : 1e-12],
    float_approx_equal (find_root (expr, x, 0, 4), 3.127271310605426)));
true;

/* SF bug report [ 607079 ] solve with repeated variable
 */
solve ('[x = 1], '[x, x]);
[x = 1];

solve ('[u = v], '[u, u, u, u]);
[u = v];

/* verify that quadpack functions return partially-evaluated expressions
 * instead of barfing on non-numeric values in limits or integrand.
 */

(kill (foo, u, au, bu, cu, omega, trig, alfa, vita, wfn), 0);
0;

e1 : quad_qag (foo (u), u, au, bu, 3);
quad_qag (foo (u), u, au, bu, 3, epsrel = 1.0E-8, epsabs = 0.0, limit = 200);

e1 : ev (e1, foo(u)=u^3, au=1);
quad_qag (u^3, u, 1, bu, 3, epsrel=1e-8, epsabs=0.0, limit=200);

ev (e1, bu=4);
[63.75, 7.077671781985375E-13, 31, 0];

e2 : quad_qags (foo (u), u, au, bu, epsrel=1e-4, epsabs=1e-4);
quad_qags (foo (u), u, au, bu, epsrel=1e-4, epsabs=1e-4, limit=200);

e2 : ev (e2, au= -1, bu=1);
quad_qags (foo (u), u, -1, 1, epsrel=1e-4, epsabs=1e-4, limit=200);

ev (e2, foo(u)=u^4);
[0.4, 4.440892098500628E-15, 21, 0];

e3 : quad_qagi (foo (u), u, minf, au, epsabs=2e-3);
quad_qagi (foo (u), u, minf, au, epsrel=1.0E-8, epsabs=2e-3, limit=200);

e3 : ev (e3, foo(u)=1/u^3);
quad_qagi (1/u^3, u, minf, au, epsrel=1.0E-8, epsabs=2e-3, limit=200);

ev (e3, au= -1);
[- 0.5, 5.551115123125784E-15, 15, 0];

e4 : quad_qawc (foo (u), u, cu, au, bu, limit=16);
quad_qawc (foo (u), u, cu, au, bu, epsrel=1.0E-8, epsabs=0.0, limit=16);

e4 : ev (e4, cu=1, au=0, bu=2);
quad_qawc (foo (u), u, 1, 0, 2, epsrel=1.0E-8, epsabs=0.0, limit=16);

ev (e4, foo(u)=u);
[1.999999999999999, 2.220446049250313E-16, 25, 0];

e5 : quad_qawf (foo (u), u, au, omega, sin, limit=32);
quad_qawf (foo (u), u, au, omega, sin, epsabs=1e-10, limit=32, maxp1=100, limlst=10);

e5 : ev (e5, foo(u)=exp(-u));
quad_qawf (exp (- u), u, au, omega, sin, epsabs=1e-10, limit=32, maxp1=100, limlst=10);

ev (e5, au=0, omega=2);
[.4000000000000001, 2.216570948815925E-11, 175, 0];

e6 : quad_qawo (foo (u), u, au, bu, omega, cos, limit=64);
quad_qawo (foo (u), u, au, bu, omega, cos, epsrel=1e-8, epsabs=0.0, limit=64, maxp1=100);

e6 : ev (e6, au=0, bu=%pi/2);
quad_qawo (foo (u), u, 0, %pi/2, omega, cos, epsrel=1e-8, epsabs=0.0, limit=64, maxp1=100);

ev (e6, foo(u)=1, omega=1);
[1.0, 1.110223024625157E-14, 15, 0];

e7 : quad_qaws (foo (u), u, au, bu, alfa, vita, wfn, limit=48);
quad_qaws (foo (u), u, au, bu, alfa, vita, wfn, epsrel=1e-8, epsabs=0.0, limit=48);

e7 : ev (e7, foo(u)=1/u, au=1, bu=2, wfn=1);
quad_qaws (1/u, u, 1, 2, alfa, vita, 1, epsrel=1e-8, epsabs=0.0, limit=48);

ev (e7, alfa=2, vita=1);
[.05296102778655729, 5.551115123125782E-17, 50, 0];

/* Tests for bfallroots.  Same as the allroots tests above */
bfallroots(x=0);
[x = 0b0];

bfallroots (17*x = 0);
[x = 0b0];

bfallroots (19*x^4 = 0);
[x = 0b0, x = 0b0, x = 0b0, x = 0b0];

bfallroots (x^3 * (x^4 - 1) = 0);
[x = 0b0, x = 0b0, x = 0b0,
 x = 1b0, x = - 1b0, x = 1b0*%i, x = - 1b0*%i];

bfallroots (%i*x^5 = 0); /* this one goes through CPOLY-SL */
[x = 0b0, x = 0b0, x = 0b0, x = 0b0, x = 0b0];

/* additional tests for bfallroots */

bfallroots (x = 1);
[x = 1b0];

bfallroots (8*u = 1);
[u = 0.125b0];

bfallroots (u^2 - 2*u = 35);
[u = -5b0, u = 7b0];

(float_approx_equal_tolerance : 1e-12, 0);
0;

/* (u - 5/4)*(u - 7/4)*(u + 1/4)*(u^2 - 2*u + 5/4) which has roots
 * 5/4, 7/4, -1/4, and 1 + %i/2, 1 - %i/2.
 */
complex_float_approx_equal 
   (bfallroots (u^5 + 131*u^3/16 + 45*u/64 + 175/256 = 19*u^4/4 + 369*u^2/64),
    [u = -0.25, u = 0.5*%i + 1, u = 1 - 0.5*%i, u = 1.25, u = 1.75]);
true;

/* (v - 5/4)*(v - 7/4*%i)*(v + 1/4*%i)*(v^2 - 2*v + 5/4) which has roots
 * 5/4, 7/4*%i, -1/4*%i, and 1 + %i/2, 1 - %i/2.
 */
complex_float_approx_equal
   (bfallroots (expand ((v - 5/4)*(v - 7/4*%i)*(v + 1/4*%i)*(v^2 - 2*v + 5/4))),
    [v = - 0.25*%i,
     v = 1.25,
     v = 1.0 - 0.5*%i,
     v = 0.5*%i + 1.0,
     v = 1.75*%i]);
true;

/* [ 940835 ] rectform fails with float/numer flags */
rectform(log(-%i)),float;
-0.5 * %i * %pi;

/* verify that exp(foo) evaluates to a number
 * probably should try several variations on this
 * adapted from sage mailing list
 */

first (quad_qags (sin (%pi * exp (x / 2)), x, 0, 2));
- 0.4373454748252497;

/* verify that nested numerical integral is handled correctly
 * adapted from sage mailing list
 */

quad_qags (w^2 * quad_qags (1/(s - w), s, 1, 5) [1], w, -5, -1) [1];
25.83639378805382;

/* find_root example from sage mailing list */

find_root (.05^(x + 1) = (x + 1)*10^(-10), x, 5, 100);
6.034992572983213;

/* another nested example, collected from mma user forum */

(f : diff (1/(1 + (1 + (a - b)^2)), a),
 g : quad_qags (f*b*(1 - b)^2, b, 0, 1) [1],
 find_root (g = 0, a, 0, 1));
0.3978613590133817;

/* a variation -- not sure what g:=... means in mma */

(f : diff (1/(1 + (1 + (a - b)^2)), a),
 g : 'quad_qags (f*b*(1 - b)^2, b, 0, 1) [1],
 find_root (g = 0, a, 0, 1));
0.3978613590133817;

/* from mailing list 2009-02-18
 * "Re: [Maxima] I want to tell maxima (-1)^0.33333333333333=-1, what should i do?"
 * see also tests/rtest_plot
 */

(foo17(x):=(sqrt(-16*x^4-16*x^3+20*x^2+12*x+23)/(6*sqrt(3))+(16*x^3-12*x^2-6*x-25)/54)^(1/3),
 float_approx_equal_tolerance : 1e-12,
 0);
0;

first (quad_qags (foo17 (u), u, -1, 0));
- 0.359753467469551;

first (quad_qags (foo17, u, -1, 0));
- 0.359753467469551;

find_root (foo17 (u) = -0.2, u, -1, 0);
- 0.246809031968399;

(bar17 (u) := foo17 (u) + 0.2, find_root (bar17, u, -1, 0));
- 0.246809031968399;

(compile (foo17), first (quad_qags (foo17, u, -1, 0)));
- 0.359753467469551;

find_root (bar17, u, -1, 0);
- 0.246809031968399;

/* SF bug # 2937837 "find_root_error documentation incorrect"
 */
 
(find_root_error : true,
 errcatch (find_root (1 + x^2, x, 0, 1)));
[];

(find_root_error : "FOO",
 errcatch (find_root (1 + x^2, x, 0, 1)));
["FOO"];

reset (float_approx_equal_tolerance, find_root_error);
[float_approx_equal_tolerance, find_root_error];

/* Here are some tests of bf_find_root, based on the find_root tests above.
   Use larger precision to catch any strangeness.
*/
fpprec:32;
32;
   
bf_find_root (2*x = -(log((4 + %e)/(2*%pi)))*(((4 + %e)/(2*%pi))^x), x, -1, 0);
-3.3402898268741287760799570603459b-2;

bf_find_root (2*x = cos((%e + %pi)*x), x, 0, 1);
1.9842105056568722553872075784746b-1;

/* verify that bf_find_root evaluates its first argument
 * (problem reported to mailing list 2007/06/07)
 */
(expr : x^2 - 5, bf_find_root (expr, x, 0, 10));
sqrt (5b0);

/* other tests for bf_find_root:
 * verify that bf_find_root expression is returned for non-numeric expression or bounds
 */
(kill (a, b), bf_find_root (x^a - 5, x, 0, 10));
bf_find_root (x^a - 5, x, 0b0, 10b0);

bf_find_root (x^3 - 5, x, a, b);
bf_find_root (x^3 - 5, x, a, b);

/* verify that bf_find_root nested inside another function call is OK */
quad_closeto(quad_qags (bf_find_root (x^a - 5, x, 0, 10), a, 1, 3),
             quad_qags (5^(1/a), a, 1, 3),
             [1d-15, 5d-15, 0, 0]);
[true,true,true,true];

bf_find_root (bf_find_root (a^2 = x, a, 0, x) = 7, x, 0, 100); /* inner bf_find_root returns sqrt(x) */
49b0;

/* verify that symbolic function name is OK */
(foo (a) := 3^a - 5, bar : foo, bf_find_root (bar, 0, 10));
log(5b0) / log(3b0);

/* example from mailing list 2006/12/01 */
(expr : t = (297 * exp ((1000000 * t) / 33) - 330) / 10000000, bf_find_root (expr, t, 1e-9, 0.003));
1.7549783076857196664805799825747b-5;

/* example from mailing list 2007/06/07 */
(expr : 6096 * tan((2 * atan(c/(2 * fl))) / r) / (tan((1/60) * (%pi/180))),
 ev (bf_find_root (expr=6096, fl, 1, 10), c=7.176, r=3264));
6.9814929328248795062474005396418b0;

/* adapted from mailing list 2007/01/13 */

(g (a) := bf_find_root (f (x, a), x, 0, 200),
 f (x, a) := x^a - 5,
 0);
0;

g (0.5);
25b0;

expr : g (z + z);
bf_find_root (x^(2 * z) - 5, x, 0b0, 200b0);

''(at (expr, z=0.25));
25b0;

quad_closeto(quad_qags (g (z), z, 1, 3),
             quad_qags (5^(1/z), z, 1, 3),
             [1d-15, 5d-15, 0, 0]);
[true,true,true,true];
             

/* adapted from the reference manual */

(kill(f), f(x) := sin(x) - x/2, 0);
0;

[bf_find_root (sin(x) - x/2, x, 0.1, %pi),
 bf_find_root (sin(x) = x/2, x, 0.1, %pi),
 bf_find_root (f(x), x, 0.1, %pi),
 bf_find_root (f, 0.1, %pi)];
[1.8954942670339809471440357380936b0, 
 1.8954942670339809471440357380936b0,
 1.8954942670339809471440357380936b0, 
 1.8954942670339809471440357380936b0];

[bf_find_root (f, 1/(%pi*%e), 2*%pi*sin(%e)),
 bf_find_root (f, log(%pi), %e^%pi),
 bf_find_root (f, exp(1/5), exp(cos(%e + %pi))),
 bf_find_root (f, cos(exp(2))/10, 10*cos(exp(2)))];
[1.8954942670339809471440357380936b0, 
 1.8954942670339809471440357380936b0,
 1.8954942670339809471440357380936b0, 
 1.8954942670339809471440357380936b0];
/* adapted from the mailing list 2007/06/10
 * charfun2 copied from the interpol share package
 */

block ([expr],
 charfun2 (z, l1, l2) := charfun (l1 <= z and z < l2),
 expr : (-.329*x^3+.494*x^2 +.559*x+.117) *charfun2(x,minf,1.0)
    +(.215*x^3-1.94*x^2 +4.85*x-2.77) *charfun2(x,2.5,inf) +(.0933*x^3-1.02*x^2
    +2.56*x-.866) *charfun2(x,2.0,2.5) +(.0195*x^3-.581*x^2
    +1.67*x-.275) *charfun2(x,1.5,2.0) +(.00117*x^3-.498*x^2 +1.55*x -.213)
    *charfun2(x,1.0,1.5),
 block ([tru : 3.12727131060542283643481895355b0,
         est : bf_find_root (expr, x, 0, 4),
         err],
   err : abs(est-tru),
   if is(err < 2*10b0^(-fpprec)) then true else err));
true;

/* bf_find_root example from sage mailing list */

bf_find_root (.05^(x + 1) = (x + 1)*10^(-10), x, 5, 100);
6.0349925729832129297929340832397b0;

(find_root_error : true,
 errcatch (bf_find_root (1 + x^2, x, 0, 1)));
[];

(find_root_error : "FOO",
 errcatch (bf_find_root (1 + x^2, x, 0, 1)));
["FOO"];

/* From bug 3010567.  Just checking that we don't get
   overflows when using bf_find_root */
block([],
  F(x,y):=(log(x)/log(y))^x-x^(log(x)/log(y)),
  bf_find_root(F(400,z),z,2,1000));
3.6541530643502285043078342270912b2;

reset (find_root_error);
[find_root_error];

/* verify that SF bug #2564 "Regression in solve?" remains fixed */

block ([foo, bar],
 foo : [[x = 3,y = 2,z = 1],
 [x = .2768050783899193-2.987202528885064*%i,y = 1.478017834441328-1.347391287293138*%i,z = -0.526432162877356*%i-.8502171357296144],
 [x = -2.885476929518458*%i-.8209889702162483,y = 1.596034454560479*%i-1.205269272758513,z = .9957341762950345*%i+.09226835946330206],
 [x = 1.337215067329613-2.685489874065195*%i,y = 1.052864325754712*%i-1.700434271459228,z = .9324722294043555-.3612416661871523*%i],
 [x = -2.394051681840712*%i-1.807903909137758,y = .8914767115530776-1.790326582710134*%i,z = .7390089172206591-.6736956436465571*%i],
 [x = 2.217026751662001-2.021086930939692*%i,y = 1.864944458808694-.7224833323742995*%i,z = .9618256431728189*%i-.2736629900720828],
 [x = -1.579296488632072*%i-2.550651407188846,y = 1.923651286345638*%i-.5473259801441661,z = -.1837495178165701*%i-.9829730996839015],
 [x = 2.797416688213066-1.08372499856146*%i,y = .3674990356331407*%i-1.965946199367804,z = -.7980172272802396*%i-.6026346363792563],
 [x = -.5512485534497117*%i-2.948919299051704,y = 0.184536718926604-1.991468352590069*%i,z = .8951632913550623*%i+.4457383557765383],
 [x = .5512485534497115*%i-2.948919299051704,y = 1.991468352590069*%i+0.184536718926604,z = .4457383557765383-.8951632913550623*%i],
 [x = 1.083724998561459*%i+2.797416688213064,y = -.3674990356331408*%i-1.965946199367804,z = .7980172272802396*%i-.6026346363792563],
 [x = 1.57929648863207*%i-2.550651407188845,y = -1.923651286345638*%i-.5473259801441662,z = .1837495178165701*%i-.9829730996839015],
 [x = 2.021086930939673*%i+2.217026751661979,y = 0.722483332374306*%i+1.864944458808712,z = -.9618256431728189*%i-.2736629900720828],
 [x = 2.394051681840719*%i-1.80790390913777,y = 1.790326582710125*%i+.8914767115530766,z = .6736956436465571*%i+.7390089172206591],
 [x = 2.685489874065194*%i+1.337215067329613,y = -1.052864325754712*%i-1.700434271459228,z = .3612416661871523*%i+.9324722294043555],
 [x = 2.885476929518458*%i-0.820988970216246,y = -1.59603445456048*%i-1.205269272758512,z = .09226835946330206-.9957341762950345*%i],
 [x = 2.9872025288851*%i+.2768050783899063,y = 1.347391287293114*%i+1.478017834441318,z = 0.526432162877356*%i-.8502171357296144]],
 bar : sort (solve([x^2*y*z = 18,x*y^3*z = 24,x*y*z^4 = 6],[x,y,z])),
 /* some gyrations to round small floats to zero */
 matchdeclare (xx, lambda ([x], floatnump (x) and abs (x) < 1e-14)),
 defrule (rfoo, xx, 0),
 apply1 (abs (foo - bar), rfoo),
 apply ("and", map (is, flatten (%))));
true;