This file is indexed.

/usr/msp430/include/msp430f4132.h is in msp430mcu 20120406-2.

This file is owned by root:root, with mode 0o644.

The actual contents of the file can be viewed below.

   1
   2
   3
   4
   5
   6
   7
   8
   9
  10
  11
  12
  13
  14
  15
  16
  17
  18
  19
  20
  21
  22
  23
  24
  25
  26
  27
  28
  29
  30
  31
  32
  33
  34
  35
  36
  37
  38
  39
  40
  41
  42
  43
  44
  45
  46
  47
  48
  49
  50
  51
  52
  53
  54
  55
  56
  57
  58
  59
  60
  61
  62
  63
  64
  65
  66
  67
  68
  69
  70
  71
  72
  73
  74
  75
  76
  77
  78
  79
  80
  81
  82
  83
  84
  85
  86
  87
  88
  89
  90
  91
  92
  93
  94
  95
  96
  97
  98
  99
 100
 101
 102
 103
 104
 105
 106
 107
 108
 109
 110
 111
 112
 113
 114
 115
 116
 117
 118
 119
 120
 121
 122
 123
 124
 125
 126
 127
 128
 129
 130
 131
 132
 133
 134
 135
 136
 137
 138
 139
 140
 141
 142
 143
 144
 145
 146
 147
 148
 149
 150
 151
 152
 153
 154
 155
 156
 157
 158
 159
 160
 161
 162
 163
 164
 165
 166
 167
 168
 169
 170
 171
 172
 173
 174
 175
 176
 177
 178
 179
 180
 181
 182
 183
 184
 185
 186
 187
 188
 189
 190
 191
 192
 193
 194
 195
 196
 197
 198
 199
 200
 201
 202
 203
 204
 205
 206
 207
 208
 209
 210
 211
 212
 213
 214
 215
 216
 217
 218
 219
 220
 221
 222
 223
 224
 225
 226
 227
 228
 229
 230
 231
 232
 233
 234
 235
 236
 237
 238
 239
 240
 241
 242
 243
 244
 245
 246
 247
 248
 249
 250
 251
 252
 253
 254
 255
 256
 257
 258
 259
 260
 261
 262
 263
 264
 265
 266
 267
 268
 269
 270
 271
 272
 273
 274
 275
 276
 277
 278
 279
 280
 281
 282
 283
 284
 285
 286
 287
 288
 289
 290
 291
 292
 293
 294
 295
 296
 297
 298
 299
 300
 301
 302
 303
 304
 305
 306
 307
 308
 309
 310
 311
 312
 313
 314
 315
 316
 317
 318
 319
 320
 321
 322
 323
 324
 325
 326
 327
 328
 329
 330
 331
 332
 333
 334
 335
 336
 337
 338
 339
 340
 341
 342
 343
 344
 345
 346
 347
 348
 349
 350
 351
 352
 353
 354
 355
 356
 357
 358
 359
 360
 361
 362
 363
 364
 365
 366
 367
 368
 369
 370
 371
 372
 373
 374
 375
 376
 377
 378
 379
 380
 381
 382
 383
 384
 385
 386
 387
 388
 389
 390
 391
 392
 393
 394
 395
 396
 397
 398
 399
 400
 401
 402
 403
 404
 405
 406
 407
 408
 409
 410
 411
 412
 413
 414
 415
 416
 417
 418
 419
 420
 421
 422
 423
 424
 425
 426
 427
 428
 429
 430
 431
 432
 433
 434
 435
 436
 437
 438
 439
 440
 441
 442
 443
 444
 445
 446
 447
 448
 449
 450
 451
 452
 453
 454
 455
 456
 457
 458
 459
 460
 461
 462
 463
 464
 465
 466
 467
 468
 469
 470
 471
 472
 473
 474
 475
 476
 477
 478
 479
 480
 481
 482
 483
 484
 485
 486
 487
 488
 489
 490
 491
 492
 493
 494
 495
 496
 497
 498
 499
 500
 501
 502
 503
 504
 505
 506
 507
 508
 509
 510
 511
 512
 513
 514
 515
 516
 517
 518
 519
 520
 521
 522
 523
 524
 525
 526
 527
 528
 529
 530
 531
 532
 533
 534
 535
 536
 537
 538
 539
 540
 541
 542
 543
 544
 545
 546
 547
 548
 549
 550
 551
 552
 553
 554
 555
 556
 557
 558
 559
 560
 561
 562
 563
 564
 565
 566
 567
 568
 569
 570
 571
 572
 573
 574
 575
 576
 577
 578
 579
 580
 581
 582
 583
 584
 585
 586
 587
 588
 589
 590
 591
 592
 593
 594
 595
 596
 597
 598
 599
 600
 601
 602
 603
 604
 605
 606
 607
 608
 609
 610
 611
 612
 613
 614
 615
 616
 617
 618
 619
 620
 621
 622
 623
 624
 625
 626
 627
 628
 629
 630
 631
 632
 633
 634
 635
 636
 637
 638
 639
 640
 641
 642
 643
 644
 645
 646
 647
 648
 649
 650
 651
 652
 653
 654
 655
 656
 657
 658
 659
 660
 661
 662
 663
 664
 665
 666
 667
 668
 669
 670
 671
 672
 673
 674
 675
 676
 677
 678
 679
 680
 681
 682
 683
 684
 685
 686
 687
 688
 689
 690
 691
 692
 693
 694
 695
 696
 697
 698
 699
 700
 701
 702
 703
 704
 705
 706
 707
 708
 709
 710
 711
 712
 713
 714
 715
 716
 717
 718
 719
 720
 721
 722
 723
 724
 725
 726
 727
 728
 729
 730
 731
 732
 733
 734
 735
 736
 737
 738
 739
 740
 741
 742
 743
 744
 745
 746
 747
 748
 749
 750
 751
 752
 753
 754
 755
 756
 757
 758
 759
 760
 761
 762
 763
 764
 765
 766
 767
 768
 769
 770
 771
 772
 773
 774
 775
 776
 777
 778
 779
 780
 781
 782
 783
 784
 785
 786
 787
 788
 789
 790
 791
 792
 793
 794
 795
 796
 797
 798
 799
 800
 801
 802
 803
 804
 805
 806
 807
 808
 809
 810
 811
 812
 813
 814
 815
 816
 817
 818
 819
 820
 821
 822
 823
 824
 825
 826
 827
 828
 829
 830
 831
 832
 833
 834
 835
 836
 837
 838
 839
 840
 841
 842
 843
 844
 845
 846
 847
 848
 849
 850
 851
 852
 853
 854
 855
 856
 857
 858
 859
 860
 861
 862
 863
 864
 865
 866
 867
 868
 869
 870
 871
 872
 873
 874
 875
 876
 877
 878
 879
 880
 881
 882
 883
 884
 885
 886
 887
 888
 889
 890
 891
 892
 893
 894
 895
 896
 897
 898
 899
 900
 901
 902
 903
 904
 905
 906
 907
 908
 909
 910
 911
 912
 913
 914
 915
 916
 917
 918
 919
 920
 921
 922
 923
 924
 925
 926
 927
 928
 929
 930
 931
 932
 933
 934
 935
 936
 937
 938
 939
 940
 941
 942
 943
 944
 945
 946
 947
 948
 949
 950
 951
 952
 953
 954
 955
 956
 957
 958
 959
 960
 961
 962
 963
 964
 965
 966
 967
 968
 969
 970
 971
 972
 973
 974
 975
 976
 977
 978
 979
 980
 981
 982
 983
 984
 985
 986
 987
 988
 989
 990
 991
 992
 993
 994
 995
 996
 997
 998
 999
1000
1001
1002
1003
1004
1005
1006
1007
1008
1009
1010
1011
1012
1013
1014
1015
1016
1017
1018
1019
1020
1021
1022
1023
1024
1025
1026
1027
1028
1029
1030
1031
1032
1033
1034
1035
1036
1037
1038
1039
1040
1041
1042
1043
1044
1045
1046
1047
1048
1049
1050
1051
1052
1053
1054
1055
1056
1057
1058
1059
1060
1061
1062
1063
1064
1065
1066
1067
1068
1069
1070
1071
1072
1073
1074
1075
1076
1077
1078
1079
1080
1081
1082
1083
1084
1085
1086
1087
1088
1089
1090
1091
1092
1093
1094
1095
1096
1097
1098
1099
1100
1101
1102
1103
1104
1105
1106
1107
1108
1109
1110
1111
1112
1113
1114
1115
1116
1117
1118
1119
1120
1121
1122
1123
1124
1125
1126
1127
1128
1129
1130
1131
1132
1133
1134
1135
1136
1137
1138
1139
1140
1141
1142
1143
1144
1145
1146
1147
1148
1149
1150
1151
1152
1153
1154
1155
1156
1157
1158
1159
1160
1161
1162
1163
1164
1165
1166
1167
1168
1169
1170
1171
1172
1173
1174
1175
1176
1177
1178
1179
1180
1181
1182
1183
1184
1185
1186
1187
1188
1189
1190
1191
1192
1193
1194
1195
1196
1197
1198
1199
1200
1201
1202
1203
1204
1205
1206
1207
1208
1209
1210
1211
1212
1213
1214
1215
1216
1217
1218
1219
1220
1221
1222
1223
1224
1225
1226
1227
1228
1229
1230
1231
1232
1233
1234
1235
1236
1237
1238
1239
1240
1241
1242
1243
1244
1245
1246
1247
1248
1249
1250
1251
1252
1253
1254
1255
1256
1257
1258
1259
1260
1261
1262
1263
1264
1265
1266
1267
1268
1269
1270
1271
1272
1273
1274
1275
1276
1277
1278
1279
1280
1281
1282
1283
1284
1285
1286
1287
1288
1289
1290
1291
1292
1293
1294
1295
1296
1297
1298
1299
1300
1301
1302
1303
1304
1305
1306
1307
1308
1309
1310
1311
1312
1313
1314
1315
1316
1317
1318
1319
1320
1321
1322
1323
1324
1325
1326
1327
1328
1329
1330
1331
1332
1333
1334
1335
1336
1337
1338
1339
1340
/* ============================================================================ */
/* Copyright (c) 2012, Texas Instruments Incorporated                           */
/*  All rights reserved.                                                        */
/*                                                                              */
/*  Redistribution and use in source and binary forms, with or without          */
/*  modification, are permitted provided that the following conditions          */
/*  are met:                                                                    */
/*                                                                              */
/*  *  Redistributions of source code must retain the above copyright           */
/*     notice, this list of conditions and the following disclaimer.            */
/*                                                                              */
/*  *  Redistributions in binary form must reproduce the above copyright        */
/*     notice, this list of conditions and the following disclaimer in the      */
/*     documentation and/or other materials provided with the distribution.     */
/*                                                                              */
/*  *  Neither the name of Texas Instruments Incorporated nor the names of      */
/*     its contributors may be used to endorse or promote products derived      */
/*     from this software without specific prior written permission.            */
/*                                                                              */
/*  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" */
/*  AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,       */
/*  THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR      */
/*  PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR            */
/*  CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,       */
/*  EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,         */
/*  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; */
/*  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,    */
/*  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR     */
/*  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,              */
/*  EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.                          */
/* ============================================================================ */

/********************************************************************
*
* Standard register and bit definitions for the Texas Instruments
* MSP430 microcontroller.
*
* This file supports assembler and C development for
* MSP430x41x2 devices.
*
* Texas Instruments, Version 1.2
*
* Rev. 1.0, First Release
* Rev. 1.1, Fixed typo in ADC10: SREF3 -> SREF2
* Rev. 1.2, Corrected OSCCAP settings
*
********************************************************************/

#ifndef __msp430x41x2
#define __msp430x41x2


#define __MSP430_HEADER_VERSION__ 1064

#define __MSP430_TI_HEADERS__

#ifdef __cplusplus
extern "C" {
#endif

#include <iomacros.h>

/************************************************************
* STANDARD BITS
************************************************************/

#define BIT0                (0x0001)
#define BIT1                (0x0002)
#define BIT2                (0x0004)
#define BIT3                (0x0008)
#define BIT4                (0x0010)
#define BIT5                (0x0020)
#define BIT6                (0x0040)
#define BIT7                (0x0080)
#define BIT8                (0x0100)
#define BIT9                (0x0200)
#define BITA                (0x0400)
#define BITB                (0x0800)
#define BITC                (0x1000)
#define BITD                (0x2000)
#define BITE                (0x4000)
#define BITF                (0x8000)

/************************************************************
* STATUS REGISTER BITS
************************************************************/

#define C                   (0x0001)
#define Z                   (0x0002)
#define N                   (0x0004)
#define V                   (0x0100)
#define GIE                 (0x0008)
#define CPUOFF              (0x0010)
#define OSCOFF              (0x0020)
#define SCG0                (0x0040)
#define SCG1                (0x0080)

/* Low Power Modes coded with Bits 4-7 in SR */

#ifndef __STDC__ /* Begin #defines for assembler */
#define LPM0                (CPUOFF)
#define LPM1                (SCG0+CPUOFF)
#define LPM2                (SCG1+CPUOFF)
#define LPM3                (SCG1+SCG0+CPUOFF)
#define LPM4                (SCG1+SCG0+OSCOFF+CPUOFF)
/* End #defines for assembler */

#else /* Begin #defines for C */
#define LPM0_bits           (CPUOFF)
#define LPM1_bits           (SCG0+CPUOFF)
#define LPM2_bits           (SCG1+CPUOFF)
#define LPM3_bits           (SCG1+SCG0+CPUOFF)
#define LPM4_bits           (SCG1+SCG0+OSCOFF+CPUOFF)

#include "in430.h"

#define LPM0      _BIS_SR(LPM0_bits)     /* Enter Low Power Mode 0 */
#define LPM0_EXIT _BIC_SR_IRQ(LPM0_bits) /* Exit Low Power Mode 0 */
#define LPM1      _BIS_SR(LPM1_bits)     /* Enter Low Power Mode 1 */
#define LPM1_EXIT _BIC_SR_IRQ(LPM1_bits) /* Exit Low Power Mode 1 */
#define LPM2      _BIS_SR(LPM2_bits)     /* Enter Low Power Mode 2 */
#define LPM2_EXIT _BIC_SR_IRQ(LPM2_bits) /* Exit Low Power Mode 2 */
#define LPM3      _BIS_SR(LPM3_bits)     /* Enter Low Power Mode 3 */
#define LPM3_EXIT _BIC_SR_IRQ(LPM3_bits) /* Exit Low Power Mode 3 */
#define LPM4      _BIS_SR(LPM4_bits)     /* Enter Low Power Mode 4 */
#define LPM4_EXIT _BIC_SR_IRQ(LPM4_bits) /* Exit Low Power Mode 4 */
#endif /* End #defines for C */

/************************************************************
* PERIPHERAL FILE MAP
************************************************************/

/************************************************************
* SPECIAL FUNCTION REGISTER ADDRESSES + CONTROL BITS
************************************************************/

#define IE1_                  0x0000    /* Interrupt Enable 1 */
sfrb(IE1, IE1_);
#define WDTIE               (0x01)    /* Watchdog Interrupt Enable */
#define OFIE                (0x02)    /* Osc. Fault  Interrupt Enable */
#define NMIIE               (0x10)    /* NMI Interrupt Enable */
#define ACCVIE              (0x20)    /* Flash Access Violation Interrupt Enable */

#define IFG1_                 0x0002    /* Interrupt Flag 1 */
sfrb(IFG1, IFG1_);
#define WDTIFG              (0x01)    /* Watchdog Interrupt Flag */
#define OFIFG               (0x02)    /* Osc. Fault Interrupt Flag */
#define PORIFG              (0x04)    /* Power On Interrupt Flag */
#define RSTIFG              (0x08)    /* Reset Interrupt Flag */
#define NMIIFG              (0x10)    /* NMI Interrupt Flag */

#define IE2_                  0x0001    /* Interrupt Enable 2 */
sfrb(IE2, IE2_);
#define UC0IE               IE2
#define UCA0RXIE            (0x01)
#define UCA0TXIE            (0x02)
#define UCB0RXIE            (0x04)
#define UCB0TXIE            (0x08)
#define BTIE                (0x80)


#define IFG2_                 0x0003    /* Interrupt Flag 2 */
sfrb(IFG2, IFG2_);
#define UC0IFG              IFG2
#define UCA0RXIFG           (0x01)
#define UCA0TXIFG           (0x02)
#define UCB0RXIFG           (0x04)
#define UCB0TXIFG           (0x08)
#define BTIFG               (0x80)


/************************************************************
* ADC10
************************************************************/
#define __MSP430_HAS_ADC10__            /* Definition to show that Module is available */

#define ADC10DTC0_            0x0048    /* ADC10 Data Transfer Control 0 */
sfrb(ADC10DTC0, ADC10DTC0_);
#define ADC10DTC1_            0x0049    /* ADC10 Data Transfer Control 1 */
sfrb(ADC10DTC1, ADC10DTC1_);
#define ADC10AE0_             0x004A    /* ADC10 Analog Enable 0 */
sfrb(ADC10AE0, ADC10AE0_);
#define ADC10AE1_             0x004B    /* ADC10 Analog Enable 1 */
sfrb(ADC10AE1, ADC10AE1_);

#define ADC10CTL0_            0x01B0    /* ADC10 Control 0 */
sfrw(ADC10CTL0, ADC10CTL0_);
#define ADC10CTL1_            0x01B2    /* ADC10 Control 1 */
sfrw(ADC10CTL1, ADC10CTL1_);
#define ADC10MEM_             0x01B4    /* ADC10 Memory */
sfrw(ADC10MEM, ADC10MEM_);
#define ADC10SA_              0x01BC    /* ADC10 Data Transfer Start Address */
sfrw(ADC10SA, ADC10SA_);

/* ADC10CTL0 */
#define ADC10SC             (0x001)     /* ADC10 Start Conversion */
#define ENC                 (0x002)     /* ADC10 Enable Conversion */
#define ADC10IFG            (0x004)     /* ADC10 Interrupt Flag */
#define ADC10IE             (0x008)     /* ADC10 Interrupt Enalbe */
#define ADC10ON             (0x010)     /* ADC10 On/Enable */
#define REFON               (0x020)     /* ADC10 Reference on */
#define REF2_5V             (0x040)     /* ADC10 Ref 0:1.5V / 1:2.5V */
#define MSC                 (0x080)     /* ADC10 Multiple SampleConversion */
#define REFBURST            (0x100)     /* ADC10 Reference Burst Mode */
#define REFOUT              (0x200)     /* ADC10 Enalbe output of Ref. */
#define ADC10SR             (0x400)     /* ADC10 Sampling Rate 0:200ksps / 1:50ksps */
#define ADC10SHT0           (0x800)     /* ADC10 Sample Hold Select Bit: 0 */
#define ADC10SHT1           (0x1000)    /* ADC10 Sample Hold Select Bit: 1 */
#define SREF0               (0x2000)    /* ADC10 Reference Select Bit: 0 */
#define SREF1               (0x4000)    /* ADC10 Reference Select Bit: 1 */
#define SREF2               (0x8000)    /* ADC10 Reference Select Bit: 2 */
#define ADC10SHT_0          (0x0000)   /* 4 x ADC10CLKs */
#define ADC10SHT_1          (0x0800)   /* 8 x ADC10CLKs */
#define ADC10SHT_2          (0x1000)   /* 16 x ADC10CLKs */
#define ADC10SHT_3          (0x1800)   /* 64 x ADC10CLKs */

#define SREF_0              (0x0000)  /* VR+ = AVCC and VR- = AVSS */
#define SREF_1              (0x2000)  /* VR+ = VREF+ and VR- = AVSS */
#define SREF_2              (0x4000)  /* VR+ = VEREF+ and VR- = AVSS */
#define SREF_3              (0x6000)  /* VR+ = VEREF+ and VR- = AVSS */
#define SREF_4              (0x8000)  /* VR+ = AVCC and VR- = VREF-/VEREF- */
#define SREF_5              (0xA000)  /* VR+ = VREF+ and VR- = VREF-/VEREF- */
#define SREF_6              (0xC000)  /* VR+ = VEREF+ and VR- = VREF-/VEREF- */
#define SREF_7              (0xE000)  /* VR+ = VEREF+ and VR- = VREF-/VEREF- */

/* ADC10CTL1 */
#define ADC10BUSY           (0x0001)    /* ADC10 BUSY */
#define CONSEQ0             (0x0002)    /* ADC10 Conversion Sequence Select 0 */
#define CONSEQ1             (0x0004)    /* ADC10 Conversion Sequence Select 1 */
#define ADC10SSEL0          (0x0008)    /* ADC10 Clock Source Select Bit: 0 */
#define ADC10SSEL1          (0x0010)    /* ADC10 Clock Source Select Bit: 1 */
#define ADC10DIV0           (0x0020)    /* ADC10 Clock Divider Select Bit: 0 */
#define ADC10DIV1           (0x0040)    /* ADC10 Clock Divider Select Bit: 1 */
#define ADC10DIV2           (0x0080)    /* ADC10 Clock Divider Select Bit: 2 */
#define ISSH                (0x0100)    /* ADC10 Invert Sample Hold Signal */
#define ADC10DF             (0x0200)    /* ADC10 Data Format 0:binary 1:2's complement */
#define SHS0                (0x0400)    /* ADC10 Sample/Hold Source Bit: 0 */
#define SHS1                (0x0800)    /* ADC10 Sample/Hold Source Bit: 1 */
#define INCH0               (0x1000)    /* ADC10 Input Channel Select Bit: 0 */
#define INCH1               (0x2000)    /* ADC10 Input Channel Select Bit: 1 */
#define INCH2               (0x4000)    /* ADC10 Input Channel Select Bit: 2 */
#define INCH3               (0x8000)    /* ADC10 Input Channel Select Bit: 3 */

#define CONSEQ_0            (0x0000)       /* Single channel single conversion */
#define CONSEQ_1            (0x0002)       /* Sequence of channels */
#define CONSEQ_2            (0x0004)       /* Repeat single channel */
#define CONSEQ_3            (0x0006)       /* Repeat sequence of channels */

#define ADC10SSEL_0         (0x0000)       /* ADC10OSC */
#define ADC10SSEL_1         (0x0008)       /* ACLK */
#define ADC10SSEL_2         (0x0010)       /* MCLK */
#define ADC10SSEL_3         (0x0018)       /* SMCLK */

#define ADC10DIV_0          (0x0000)    /* ADC10 Clock Divider Select 0 */
#define ADC10DIV_1          (0x0020)    /* ADC10 Clock Divider Select 1 */
#define ADC10DIV_2          (0x0040)    /* ADC10 Clock Divider Select 2 */
#define ADC10DIV_3          (0x0060)    /* ADC10 Clock Divider Select 3 */
#define ADC10DIV_4          (0x0080)    /* ADC10 Clock Divider Select 4 */
#define ADC10DIV_5          (0x00A0)    /* ADC10 Clock Divider Select 5 */
#define ADC10DIV_6          (0x00C0)    /* ADC10 Clock Divider Select 6 */
#define ADC10DIV_7          (0x00E0)    /* ADC10 Clock Divider Select 7 */

#define SHS_0               (0x0000)   /* ADC10SC */
#define SHS_1               (0x0400)   /* Ext. SC Trigger 1 */
#define SHS_2               (0x0800)   /* Ext. SC Trigger 2 */
#define SHS_3               (0x0C00)   /* Ext. SC Trigger 3 */

#define INCH_0              (0x0000)  /* Selects Channel 0 */
#define INCH_1              (0x1000)  /* Selects Channel 1 */
#define INCH_2              (0x2000)  /* Selects Channel 2 */
#define INCH_3              (0x3000)  /* Selects Channel 3 */
#define INCH_4              (0x4000)  /* Selects Channel 4 */
#define INCH_5              (0x5000)  /* Selects Channel 5 */
#define INCH_6              (0x6000)  /* Selects Channel 6 */
#define INCH_7              (0x7000)  /* Selects Channel 7 */
#define INCH_8              (0x8000)  /* Selects Channel 8 */
#define INCH_9              (0x9000)  /* Selects Channel 9 */
#define INCH_10             (0xA000) /* Selects Channel 10 */
#define INCH_11             (0xB000) /* Selects Channel 11 */
#define INCH_12             (0xC000) /* Selects Channel 12 */
#define INCH_13             (0xD000) /* Selects Channel 13 */
#define INCH_14             (0xE000) /* Selects Channel 14 */
#define INCH_15             (0xF000) /* Selects Channel 15 */

/* ADC10DTC0 */
#define ADC10FETCH          (0x001)     /* This bit should normally be reset */
#define ADC10B1             (0x002)     /* ADC10 block one */
#define ADC10CT             (0x004)     /* ADC10 continuous transfer */
#define ADC10TB             (0x008)     /* ADC10 two-block mode */
#define ADC10DISABLE        (0x000)     /* ADC10DTC1 */

/************************************************************
* BASIC TIMER with Real Time Clock
************************************************************/
#define __MSP430_HAS_BT_RTC__          /* Definition to show that Module is available */

#define BTCTL_                0x0040    /* Basic Timer Control */
sfrb(BTCTL, BTCTL_);
#define RTCCTL_               0x0041    /* Real Time Clock Control */
sfrb(RTCCTL, RTCCTL_);
#define RTCNT1_               0x0042    /* Real Time Counter 1 */
sfrb(RTCNT1, RTCNT1_);
#define RTCNT2_               0x0043    /* Real Time Counter 2 */
sfrb(RTCNT2, RTCNT2_);
#define RTCNT3_               0x0044    /* Real Time Counter 3 */
sfrb(RTCNT3, RTCNT3_);
#define RTCNT4_               0x0045    /* Real Time Counter 4 */
sfrb(RTCNT4, RTCNT4_);
#define BTCNT1_               0x0046    /* Basic Timer Count 1 */
sfrb(BTCNT1, BTCNT1_);
#define BTCNT2_               0x0047    /* Basic Timer Count 2 */
sfrb(BTCNT2, BTCNT2_);
#define RTCDAY_               0x004C    /* Real Time Clock Day */
sfrb(RTCDAY, RTCDAY_);
#define RTCMON_               0x004D    /* Real Time Clock Month */
sfrb(RTCMON, RTCMON_);
#define RTCYEARL_             0x004E    /* Real Time Clock Year (Low Byte) */
sfrb(RTCYEARL, RTCYEARL_);
#define RTCYEARH_             0x004F    /* Real Time Clock Year (High Byte) */
sfrb(RTCYEARH, RTCYEARH_);
#define RTCSEC              RTCNT1
#define RTCMIN              RTCNT2
#define RTCHOUR             RTCNT3
#define RTCDOW              RTCNT4

#define RTCTL_                0x0040    /* Basic/Real Timer Control */
sfrw(RTCTL, RTCTL_);
#define RTCTIM0_              0x0042    /* Real Time Clock Time 0 */
sfrw(RTCTIM0, RTCTIM0_);
#define RTCTIM1_              0x0044    /* Real Time Clock Time 1 */
sfrw(RTCTIM1, RTCTIM1_);
#define BTCNT12_              0x0046    /* Basic Timer Count 1/2 */
sfrw(BTCNT12, BTCNT12_);
#define RTCDATE_              0x004C    /* Real Time Clock Date */
sfrw(RTCDATE, RTCDATE_);
#define RTCYEAR_              0x004E    /* Real Time Clock Year */
sfrw(RTCYEAR, RTCYEAR_);
#define RTCNT12             RTCTIM0
#define RTCNT34             RTCTIM1

#define BTSSEL              (0x80)                     /* fBT = fMCLK (main clock) */
#define BTHOLD              (0x40)                     /* BT1 is held if this bit is set */
#define BTDIV               (0x20)                     /* fCLK2 = ACLK:256 */
//#define res               (0x10)
//#define res               (0x08)
#define BTIP2               (0x04)
#define BTIP1               (0x02)
#define BTIP0               (0x01)

#define RTCBCD              (0x80)                     /* RTC BCD Select */
#define RTCHOLD             (0x40)                     /* RTC Hold */
#define RTCMODE1            (0x20)                     /* RTC Mode 1 */
#define RTCMODE0            (0x10)                     /* RTC Mode 0 */
#define RTCTEV1             (0x08)                     /* RTC Time Event 1 */
#define RTCTEV0             (0x04)                     /* RTC Time Event 0 */
#define RTCIE               (0x02)                     /* RTC Interrupt Enable */
#define RTCFG               (0x01)                     /* RTC Event Flag */

#define RTCTEV_0            (0x00)                     /* RTC Time Event: 0 */
#define RTCTEV_1            (0x04)                     /* RTC Time Event: 1 */
#define RTCTEV_2            (0x08)                     /* RTC Time Event: 2 */
#define RTCTEV_3            (0x0C)                     /* RTC Time Event: 3 */
#define RTCMODE_0           (0x00)                     /* RTC Mode: 0 */
#define RTCMODE_1           (0x10)                     /* RTC Mode: 1 */
#define RTCMODE_2           (0x20)                     /* RTC Mode: 2 */
#define RTCMODE_3           (0x30)                     /* RTC Mode: 3 */


/* Frequency of the BTCNT2 coded with Bit 5 and 7 in BTCTL */
#define BT_fCLK2_ACLK               (0x00)
#define BT_fCLK2_ACLK_DIV256        (BTDIV)
#define BT_fCLK2_MCLK               (BTSSEL)

/* Interrupt interval time fINT coded with Bits 0-2 in BTCTL */
#define BT_fCLK2_DIV2       (0x00)                    /* fINT = fCLK2:2 (default) */
#define BT_fCLK2_DIV4       (BTIP0)                   /* fINT = fCLK2:4 */
#define BT_fCLK2_DIV8       (BTIP1)                   /* fINT = fCLK2:8 */
#define BT_fCLK2_DIV16      (BTIP1+BTIP0)             /* fINT = fCLK2:16 */
#define BT_fCLK2_DIV32      (BTIP2)                   /* fINT = fCLK2:32 */
#define BT_fCLK2_DIV64      (BTIP2+BTIP0)             /* fINT = fCLK2:64 */
#define BT_fCLK2_DIV128     (BTIP2+BTIP1)             /* fINT = fCLK2:128 */
#define BT_fCLK2_DIV256     (BTIP2+BTIP1+BTIP0)       /* fINT = fCLK2:256 */

/* with assumed vlues of fACLK=32KHz, fMCLK=1MHz */
/* fBT=fACLK is thought for longer interval times */
#define BT_ADLY_0_064       (0x00)                    /* 0.064ms interval (default) */
#define BT_ADLY_0_125       (BTIP0)                   /* 0.125ms    " */
#define BT_ADLY_0_25        (BTIP1)                   /* 0.25ms     " */
#define BT_ADLY_0_5         (BTIP1+BTIP0)             /* 0.5ms      " */
#define BT_ADLY_1           (BTIP2)                   /* 1ms        " */
#define BT_ADLY_2           (BTIP2+BTIP0)             /* 2ms        " */
#define BT_ADLY_4           (BTIP2+BTIP1)             /* 4ms        " */
#define BT_ADLY_8           (BTIP2+BTIP1+BTIP0)       /* 8ms        " */
#define BT_ADLY_16          (BTDIV)                   /* 16ms       " */
#define BT_ADLY_32          (BTDIV+BTIP0)             /* 32ms       " */
#define BT_ADLY_64          (BTDIV+BTIP1)             /* 64ms       " */
#define BT_ADLY_125         (BTDIV+BTIP1+BTIP0)       /* 125ms      " */
#define BT_ADLY_250         (BTDIV+BTIP2)             /* 250ms      " */
#define BT_ADLY_500         (BTDIV+BTIP2+BTIP0)       /* 500ms      " */
#define BT_ADLY_1000        (BTDIV+BTIP2+BTIP1)       /* 1000ms     " */
#define BT_ADLY_2000        (BTDIV+BTIP2+BTIP1+BTIP0) /* 2000ms     " */
/* fCLK2=fMCLK (1MHz) is thought for short interval times */
/* the timing for short intervals is more precise than ACLK */
/* NOTE */
/* Be sure that the SCFQCTL-Register is set to 01Fh so that fMCLK=1MHz */
/* Too low interval time results in interrupts too frequent for the processor to handle! */
#define BT_MDLY_0_002       (BTSSEL)                  /* 0.002ms interval       *** interval times */
#define BT_MDLY_0_004       (BTSSEL+BTIP0)            /* 0.004ms    "           *** too short for */
#define BT_MDLY_0_008       (BTSSEL+BTIP1)            /* 0.008ms    "           *** interrupt */
#define BT_MDLY_0_016       (BTSSEL+BTIP1+BTIP0)      /* 0.016ms    "           *** handling */
#define BT_MDLY_0_032       (BTSSEL+BTIP2)            /* 0.032ms    " */
#define BT_MDLY_0_064       (BTSSEL+BTIP2+BTIP0)      /* 0.064ms    " */
#define BT_MDLY_0_125       (BTSSEL+BTIP2+BTIP1)      /* 0.125ms    " */
#define BT_MDLY_0_25        (BTSSEL+BTIP2+BTIP1+BTIP0)/* 0.25ms     " */

/* Hold coded with Bits 6-7 in BT(1)CTL */
/* this is for BT */
#define BTHOLD_CNT1         (BTHOLD)            /* BTCNT1 is held while BTHOLD is set */
#define BTHOLD_CNT1_2       (BTHOLD+BTDIV)      /* BT1CNT1 .AND. BT1CNT2 are held while ~ is set */

/* INTERRUPT CONTROL BITS */
/* #define BTIE                0x80 */
/* #define BTIFG               0x80 */

/************************************************************
* Comparator A
************************************************************/
#define __MSP430_HAS_CAPLUS__         /* Definition to show that Module is available */

#define CACTL1_               0x0059    /* Comparator A Control 1 */
sfrb(CACTL1, CACTL1_);
#define CACTL2_               0x005A    /* Comparator A Control 2 */
sfrb(CACTL2, CACTL2_);
#define CAPD_                 0x005B    /* Comparator A Port Disable */
sfrb(CAPD, CAPD_);

#define CAIFG               (0x01)    /* Comp. A Interrupt Flag */
#define CAIE                (0x02)    /* Comp. A Interrupt Enable */
#define CAIES               (0x04)    /* Comp. A Int. Edge Select: 0:rising / 1:falling */
#define CAON                (0x08)    /* Comp. A enable */
#define CAREF0              (0x10)    /* Comp. A Internal Reference Select 0 */
#define CAREF1              (0x20)    /* Comp. A Internal Reference Select 1 */
#define CARSEL              (0x40)    /* Comp. A Internal Reference Enable */
#define CAEX                (0x80)    /* Comp. A Exchange Inputs */

#define CAREF_0             (0x00)    /* Comp. A Int. Ref. Select 0 : Off */
#define CAREF_1             (0x10)    /* Comp. A Int. Ref. Select 1 : 0.25*Vcc */
#define CAREF_2             (0x20)    /* Comp. A Int. Ref. Select 2 : 0.5*Vcc */
#define CAREF_3             (0x30)    /* Comp. A Int. Ref. Select 3 : Vt*/

#define CAOUT               (0x01)    /* Comp. A Output */
#define CAF                 (0x02)    /* Comp. A Enable Output Filter */
#define P2CA0               (0x04)    /* Comp. A +Terminal Multiplexer */
#define P2CA1               (0x08)    /* Comp. A -Terminal Multiplexer */
#define P2CA2               (0x10)    /* Comp. A -Terminal Multiplexer */
#define P2CA3               (0x20)    /* Comp. A -Terminal Multiplexer */
#define P2CA4               (0x40)    /* Comp. A +Terminal Multiplexer */
#define CASHORT             (0x80)    /* Comp. A Short + and - Terminals */

#define CAPD0               (0x01)    /* Comp. A Disable Input Buffer of Port Register .0 */
#define CAPD1               (0x02)    /* Comp. A Disable Input Buffer of Port Register .1 */
#define CAPD2               (0x04)    /* Comp. A Disable Input Buffer of Port Register .2 */
#define CAPD3               (0x08)    /* Comp. A Disable Input Buffer of Port Register .3 */
#define CAPD4               (0x10)    /* Comp. A Disable Input Buffer of Port Register .4 */
#define CAPD5               (0x20)    /* Comp. A Disable Input Buffer of Port Register .5 */
#define CAPD6               (0x40)    /* Comp. A Disable Input Buffer of Port Register .6 */
#define CAPD7               (0x80)    /* Comp. A Disable Input Buffer of Port Register .7 */

/*************************************************************
* Flash Memory
*************************************************************/
#define __MSP430_HAS_FLASH2__         /* Definition to show that Module is available */

#define FCTL1_                0x0128    /* FLASH Control 1 */
sfrw(FCTL1, FCTL1_);
#define FCTL2_                0x012A    /* FLASH Control 2 */
sfrw(FCTL2, FCTL2_);
#define FCTL3_                0x012C    /* FLASH Control 3 */
sfrw(FCTL3, FCTL3_);

#define FRKEY               (0x9600)  /* Flash key returned by read */
#define FWKEY               (0xA500)  /* Flash key for write */
#define FXKEY               (0x3300)  /* for use with XOR instruction */

#define ERASE               (0x0002)  /* Enable bit for Flash segment erase */
#define MERAS               (0x0004)  /* Enable bit for Flash mass erase */
#define EEI                 (0x0008)  /* Enable Erase Interrupts */
#define EEIEX               (0x0010)  /* Enable Emergency Interrupt Exit */
#define WRT                 (0x0040)  /* Enable bit for Flash write */
#define BLKWRT              (0x0080)  /* Enable bit for Flash segment write */
#define SEGWRT              (0x0080)  /* old definition */ /* Enable bit for Flash segment write */

#define FN0                 (0x0001)  /* Divide Flash clock by 1 to 64 using FN0 to FN5 according to: */
#define FN1                 (0x0002)  /*  32*FN5 + 16*FN4 + 8*FN3 + 4*FN2 + 2*FN1 + FN0 + 1 */
#ifndef FN2
#define FN2                 (0x0004)
#endif
#ifndef FN3
#define FN3                 (0x0008)
#endif
#ifndef FN4
#define FN4                 (0x0010)
#endif
#define FN5                 (0x0020)
#define FSSEL0              (0x0040)  /* Flash clock select 0 */        /* to distinguish from USART SSELx */
#define FSSEL1              (0x0080)  /* Flash clock select 1 */

#define FSSEL_0             (0x0000)  /* Flash clock select: 0 - ACLK */
#define FSSEL_1             (0x0040)  /* Flash clock select: 1 - MCLK */
#define FSSEL_2             (0x0080)  /* Flash clock select: 2 - SMCLK */
#define FSSEL_3             (0x00C0)  /* Flash clock select: 3 - SMCLK */

#define BUSY                (0x0001)  /* Flash busy: 1 */
#define KEYV                (0x0002)  /* Flash Key violation flag */
#define ACCVIFG             (0x0004)  /* Flash Access violation flag */
#define WAIT                (0x0008)  /* Wait flag for segment write */
#define LOCK                (0x0010)  /* Lock bit: 1 - Flash is locked (read only) */
#define EMEX                (0x0020)  /* Flash Emergency Exit */
#define LOCKA               (0x0040)  /* Segment A Lock bit: read = 1 - Segment is locked (read only) */
#define FAIL                (0x0080)  /* Last Program or Erase failed */

/************************************************************
* SYSTEM CLOCK, FLL+
************************************************************/
#define __MSP430_HAS_FLLPLUS__        /* Definition to show that Module is available */

#define SCFI0_                0x0050    /* System Clock Frequency Integrator 0 */
sfrb(SCFI0, SCFI0_);
#define FN_2                (0x04)    /* fDCOCLK =   1.4-12MHz*/
#define FN_3                (0x08)    /* fDCOCLK =   2.2-17Mhz*/
#define FN_4                (0x10)    /* fDCOCLK =   3.2-25Mhz*/
#define FN_8                (0x20)    /* fDCOCLK =     5-40Mhz*/
#define FLLD0               (0x40)    /* Loop Divider Bit : 0 */
#define FLLD1               (0x80)    /* Loop Divider Bit : 1 */

#define FLLD_1              (0x00)    /* Multiply Selected Loop Freq. By 1 */
#define FLLD_2              (0x40)    /* Multiply Selected Loop Freq. By 2 */
#define FLLD_4              (0x80)    /* Multiply Selected Loop Freq. By 4 */
#define FLLD_8              (0xC0)    /* Multiply Selected Loop Freq. By 8 */

#define SCFI1_                0x0051    /* System Clock Frequency Integrator 1 */
sfrb(SCFI1, SCFI1_);
#define SCFQCTL_              0x0052    /* System Clock Frequency Control */
sfrb(SCFQCTL, SCFQCTL_);
/* System clock frequency values fMCLK coded with Bits 0-6 in SCFQCTL */
/* #define SCFQ_32K            0x00                        fMCLK=1*fACLK       only a range from */
#define SCFQ_64K            (0x01)                     /* fMCLK=2*fACLK          1+1 to 127+1 is possible */
#define SCFQ_128K           (0x03)                     /* fMCLK=4*fACLK */
#define SCFQ_256K           (0x07)                     /* fMCLK=8*fACLK */
#define SCFQ_512K           (0x0F)                     /* fMCLK=16*fACLK */
#define SCFQ_1M             (0x1F)                     /* fMCLK=32*fACLK */
#define SCFQ_2M             (0x3F)                     /* fMCLK=64*fACLK */
#define SCFQ_4M             (0x7F)                     /* fMCLK=128*fACLK */
#define SCFQ_M              (0x80)                     /* Modulation Disable */

#define FLL_CTL0_             0x0053    /* FLL+ Control 0 */
sfrb(FLL_CTL0, FLL_CTL0_);
#define DCOF                (0x01)                     /* DCO Fault Flag */
#define LFOF                (0x02)                     /* Low Frequency Oscillator Fault Flag */
#define XT1OF               (0x04)                     /* High Frequency Oscillator 1 Fault Flag */
#define OSCCAP0             (0x10)                     /* XIN/XOUT Cap 0 */
#define OSCCAP1             (0x20)                     /* XIN/XOUT Cap 1 */
#define XTS_FLL             (0x40)                     /* 1: Selects high-freq. oscillator */
#define DCOPLUS             (0x80)                     /* DCO+ Enable */

#define XCAP0PF             (0x00)                     /* XIN Cap = XOUT Cap = 0pf */
#define XCAP5_5F            (0x10)                     /* XIN Cap = XOUT Cap = 5.5pf */
#define XCAP8_5PF           (0x20)                     /* XIN Cap = XOUT Cap = 8.5pf */
#define XCAP11PF            (0x30)                     /* XIN Cap = XOUT Cap = 11pf */
#define OSCCAP_0            (0x00)                     /* XIN Cap = XOUT Cap: 0 */
#define OSCCAP_1            (0x10)                     /* XIN Cap = XOUT Cap: 1 */
#define OSCCAP_2            (0x20)                     /* XIN Cap = XOUT Cap: 2 */
#define OSCCAP_3            (0x30)                     /* XIN Cap = XOUT Cap: 3 */

#define FLL_CTL1_             0x0054    /* FLL+ Control 1 */
sfrb(FLL_CTL1, FLL_CTL1_);
#define FLL_DIV0            (0x01)                     /* FLL+ Divide Px.x/ACLK 0 */
#define FLL_DIV1            (0x02)                     /* FLL+ Divide Px.x/ACLK 1 */
#define SELM0               (0x08)                     /* MCLK Source Select 0 */
#define SELM1               (0x10)                     /* MCLK Source Select 1 */
#define SMCLKOFF            (0x40)                     /* Peripheral Module Clock (SMCLK) disable */

#define FLL_DIV_1           (0x00)                     /* FLL+ Divide Px.x/ACLK By 1 */
#define FLL_DIV_2           (0x01)                     /* FLL+ Divide Px.x/ACLK By 2 */
#define FLL_DIV_4           (0x02)                     /* FLL+ Divide Px.x/ACLK By 4 */
#define FLL_DIV_8           (0x03)                     /* FLL+ Divide Px.x/ACLK By 8 */

#define SELM_DCO            (0x00)                     /* Select DCO for CPU MCLK */
#define SELM_A              (0x18)                     /* Select A (from LFXT1) for CPU MCLK */

#define FLL_CTL2_             0x0055    /* FLL+ Control 2 */
sfrb(FLL_CTL2, FLL_CTL2_);

#define LF1XT1S0            (0x10)   /* Mode 0 for LFXT1 */
#define LF1XT1S1            (0x20)   /* Mode 0 for LFXT1 */

#define LF1XT1S_0           (0x00)   /* Mode 0 for LF : 32kHz */
#define LF1XT1S_1           (0x10)   /* Mode 1 for LF : reserved */
#define LF1XT1S_2           (0x20)   /* Mode 2 for LF : VLO */
#define LF1XT1S_3           (0x30)   /* Mode 3 for LF : Digital input signal */

/* INTERRUPT CONTROL BITS */
/* These two bits are defined in the Special Function Registers */
/* #define OFIFG               0x02 */
/* #define OFIE                0x02 */

/************************************************************
* LCD_A
************************************************************/
#define __MSP430_HAS_LCD_A__          /* Definition to show that Module is available */

#define LCDACTL_              0x0090    /* LCD_A Control Register */
sfrb(LCDACTL, LCDACTL_);
#define LCDON               (0x01)
#define LCDSON              (0x04)
#define LCDMX0              (0x08)
#define LCDMX1              (0x10)
#define LCDFREQ0            (0x20)
#define LCDFREQ1            (0x40)
#define LCDFREQ2            (0x80)
/* Display modes coded with Bits 2-4 */
#define LCDSTATIC           (LCDSON)
#define LCD2MUX             (LCDMX0+LCDSON)
#define LCD3MUX             (LCDMX1+LCDSON)
#define LCD4MUX             (LCDMX1+LCDMX0+LCDSON)
/* Frequency select code with Bits 5-7 */
#define LCDFREQ_32          (0x00)    /* LCD Freq: ACLK divided by 32 */
#define LCDFREQ_64          (0x20)    /* LCD Freq: ACLK divided by 64 */
#define LCDFREQ_96          (0x40)    /* LCD Freq: ACLK divided by 96 */
#define LCDFREQ_128         (0x60)    /* LCD Freq: ACLK divided by 128 */
#define LCDFREQ_192         (0x80)    /* LCD Freq: ACLK divided by 192 */
#define LCDFREQ_256         (0xA0)    /* LCD Freq: ACLK divided by 256 */
#define LCDFREQ_384         (0xC0)    /* LCD Freq: ACLK divided by 384 */
#define LCDFREQ_512         (0xE0)    /* LCD Freq: ACLK divided by 512 */

#define LCDAPCTL0_            0x00AC    /* LCD_A Port Control Register 0 */
sfrb(LCDAPCTL0, LCDAPCTL0_);
#define LCDS0               (0x01)    /* LCD Segment  0 to  3 Enable. */
#define LCDS4               (0x02)    /* LCD Segment  4 to  7 Enable. */
#define LCDS8               (0x04)    /* LCD Segment  8 to 11 Enable. */
#define LCDS12              (0x08)    /* LCD Segment 12 to 15 Enable. */
#define LCDS16              (0x10)    /* LCD Segment 16 to 19 Enable. */
#define LCDS20              (0x20)    /* LCD Segment 20 to 23 Enable. */
#define LCDS24              (0x40)    /* LCD Segment 24 to 27 Enable. */
#define LCDS28              (0x80)    /* LCD Segment 28 to 31 Enable. */

#define LCDAPCTL1_            0x00AD    /* LCD_A Port Control Register 1 */
sfrb(LCDAPCTL1, LCDAPCTL1_);
#define LCDS32              (0x01)    /* LCD Segment 32 to 35 Enable. */
#define LCDS36              (0x02)    /* LCD Segment 36 to 39 Enable. */

#define LCDAVCTL0_            0x00AE    /* LCD_A Voltage Control Register 0 */
sfrb(LCDAVCTL0, LCDAVCTL0_);
#define LCD2B               (0x01)    /* Selects 1/2 bias. */
#define VLCDREF0            (0x02)    /* Selects reference voltage for regulated charge pump: 0 */
#define VLCDREF1            (0x04)    /* Selects reference voltage for regulated charge pump: 1 */
#define LCDCPEN             (0x08)    /* LCD Voltage Charge Pump Enable. */
#define VLCDEXT             (0x10)    /* Select external source for VLCD. */
#define LCDREXT             (0x20)    /* Selects external connections for LCD mid voltages. */
#define LCDR03EXT           (0x40)    /* Selects external connection for lowest LCD voltage. */

/* Reference voltage source select for the regulated charge pump */
#define VLCDREF_0           (0<<1)    /* Internal */
#define VLCDREF_1           (1<<1)    /* External */
#define VLCDREF_2           (2<<1)    /* Reserved */
#define VLCDREF_3           (3<<1)    /* Reserved */

#define LCDAVCTL1_            0x00AF    /* LCD_A Voltage Control Register 1 */
sfrb(LCDAVCTL1, LCDAVCTL1_);
#define VLCD0               (0x02)    /* VLCD select: 0 */
#define VLCD1               (0x04)    /* VLCD select: 1 */
#define VLCD2               (0x08)    /* VLCD select: 2 */
#define VLCD3               (0x10)    /* VLCD select: 3 */

/* Charge pump voltage selections */
#define VLCD_0              (0<<1)    /* Charge pump disabled */
#define VLCD_1              (1<<1)    /* VLCD = 2.60V */
#define VLCD_2              (2<<1)    /* VLCD = 2.66V */
#define VLCD_3              (3<<1)    /* VLCD = 2.72V */
#define VLCD_4              (4<<1)    /* VLCD = 2.78V */
#define VLCD_5              (5<<1)    /* VLCD = 2.84V */
#define VLCD_6              (6<<1)    /* VLCD = 2.90V */
#define VLCD_7              (7<<1)    /* VLCD = 2.96V */
#define VLCD_8              (8<<1)    /* VLCD = 3.02V */
#define VLCD_9              (9<<1)    /* VLCD = 3.08V */
#define VLCD_10             (10<<1)   /* VLCD = 3.14V */
#define VLCD_11             (11<<1)   /* VLCD = 3.20V */
#define VLCD_12             (12<<1)   /* VLCD = 3.26V */
#define VLCD_13             (12<<1)   /* VLCD = 3.32V */
#define VLCD_14             (13<<1)   /* VLCD = 3.38V */
#define VLCD_15             (15<<1)   /* VLCD = 3.44V */

#define VLCD_DISABLED       (0<<1)    /* Charge pump disabled */
#define VLCD_2_60           (1<<1)    /* VLCD = 2.60V */
#define VLCD_2_66           (2<<1)    /* VLCD = 2.66V */
#define VLCD_2_72           (3<<1)    /* VLCD = 2.72V */
#define VLCD_2_78           (4<<1)    /* VLCD = 2.78V */
#define VLCD_2_84           (5<<1)    /* VLCD = 2.84V */
#define VLCD_2_90           (6<<1)    /* VLCD = 2.90V */
#define VLCD_2_96           (7<<1)    /* VLCD = 2.96V */
#define VLCD_3_02           (8<<1)    /* VLCD = 3.02V */
#define VLCD_3_08           (9<<1)    /* VLCD = 3.08V */
#define VLCD_3_14           (10<<1)   /* VLCD = 3.14V */
#define VLCD_3_20           (11<<1)   /* VLCD = 3.20V */
#define VLCD_3_26           (12<<1)   /* VLCD = 3.26V */
#define VLCD_3_32           (12<<1)   /* VLCD = 3.32V */
#define VLCD_3_38           (13<<1)   /* VLCD = 3.38V */
#define VLCD_3_44           (15<<1)   /* VLCD = 3.44V */

#define LCDMEM_             (0x0091)  /* LCD Memory */
#ifndef __STDC__
#define LCDMEM              (LCDMEM_) /* LCD Memory (for assembler) */
#else
#define LCDMEM              ((volatile char*) LCDMEM_) /* LCD Memory (for C) */
#endif
#define LCDM1_                0x0091    /* LCD Memory 1 */
sfrb(LCDM1, LCDM1_);
#define LCDM2_                0x0092    /* LCD Memory 2 */
sfrb(LCDM2, LCDM2_);
#define LCDM3_                0x0093    /* LCD Memory 3 */
sfrb(LCDM3, LCDM3_);
#define LCDM4_                0x0094    /* LCD Memory 4 */
sfrb(LCDM4, LCDM4_);
#define LCDM5_                0x0095    /* LCD Memory 5 */
sfrb(LCDM5, LCDM5_);
#define LCDM6_                0x0096    /* LCD Memory 6 */
sfrb(LCDM6, LCDM6_);
#define LCDM7_                0x0097    /* LCD Memory 7 */
sfrb(LCDM7, LCDM7_);
#define LCDM8_                0x0098    /* LCD Memory 8 */
sfrb(LCDM8, LCDM8_);
#define LCDM9_                0x0099    /* LCD Memory 9 */
sfrb(LCDM9, LCDM9_);
#define LCDM10_               0x009A    /* LCD Memory 10 */
sfrb(LCDM10, LCDM10_);
#define LCDM11_               0x009B    /* LCD Memory 11 */
sfrb(LCDM11, LCDM11_);
#define LCDM12_               0x009C    /* LCD Memory 12 */
sfrb(LCDM12, LCDM12_);
#define LCDM13_               0x009D    /* LCD Memory 13 */
sfrb(LCDM13, LCDM13_);
#define LCDM14_               0x009E    /* LCD Memory 14 */
sfrb(LCDM14, LCDM14_);
#define LCDM15_               0x009F    /* LCD Memory 15 */
sfrb(LCDM15, LCDM15_);
#define LCDM16_               0x00A0    /* LCD Memory 16 */
sfrb(LCDM16, LCDM16_);
#define LCDM17_               0x00A1    /* LCD Memory 17 */
sfrb(LCDM17, LCDM17_);
#define LCDM18_               0x00A2    /* LCD Memory 18 */
sfrb(LCDM18, LCDM18_);
#define LCDM19_               0x00A3    /* LCD Memory 19 */
sfrb(LCDM19, LCDM19_);
#define LCDM20_               0x00A4    /* LCD Memory 20 */
sfrb(LCDM20, LCDM20_);

#define LCDMA               (LCDM10)  /* LCD Memory A */
#define LCDMB               (LCDM11)  /* LCD Memory B */
#define LCDMC               (LCDM12)  /* LCD Memory C */
#define LCDMD               (LCDM13)  /* LCD Memory D */
#define LCDME               (LCDM14)  /* LCD Memory E */
#define LCDMF               (LCDM15)  /* LCD Memory F */

/************************************************************
* DIGITAL I/O Port1/2
************************************************************/
#define __MSP430_HAS_PORT1__          /* Definition to show that Module is available */
#define __MSP430_HAS_PORT2__          /* Definition to show that Module is available */

#define P1IN_                 0x0020    /* Port 1 Input */
const_sfrb(P1IN, P1IN_);
#define P1OUT_                0x0021    /* Port 1 Output */
sfrb(P1OUT, P1OUT_);
#define P1DIR_                0x0022    /* Port 1 Direction */
sfrb(P1DIR, P1DIR_);
#define P1IFG_                0x0023    /* Port 1 Interrupt Flag */
sfrb(P1IFG, P1IFG_);
#define P1IES_                0x0024    /* Port 1 Interrupt Edge Select */
sfrb(P1IES, P1IES_);
#define P1IE_                 0x0025    /* Port 1 Interrupt Enable */
sfrb(P1IE, P1IE_);
#define P1SEL_                0x0026    /* Port 1 Selection */
sfrb(P1SEL, P1SEL_);

#define P2IN_                 0x0028    /* Port 2 Input */
const_sfrb(P2IN, P2IN_);
#define P2OUT_                0x0029    /* Port 2 Output */
sfrb(P2OUT, P2OUT_);
#define P2DIR_                0x002A    /* Port 2 Direction */
sfrb(P2DIR, P2DIR_);
#define P2IFG_                0x002B    /* Port 2 Interrupt Flag */
sfrb(P2IFG, P2IFG_);
#define P2IES_                0x002C    /* Port 2 Interrupt Edge Select */
sfrb(P2IES, P2IES_);
#define P2IE_                 0x002D    /* Port 2 Interrupt Enable */
sfrb(P2IE, P2IE_);
#define P2SEL_                0x002E    /* Port 2 Selection */
sfrb(P2SEL, P2SEL_);

/************************************************************
* DIGITAL I/O Port3/4
************************************************************/
#define __MSP430_HAS_PORT3__          /* Definition to show that Module is available */
#define __MSP430_HAS_PORT4__          /* Definition to show that Module is available */

#define P3IN_                 0x0018    /* Port 3 Input */
const_sfrb(P3IN, P3IN_);
#define P3OUT_                0x0019    /* Port 3 Output */
sfrb(P3OUT, P3OUT_);
#define P3DIR_                0x001A    /* Port 3 Direction */
sfrb(P3DIR, P3DIR_);
#define P3SEL_                0x001B    /* Port 3 Selection */
sfrb(P3SEL, P3SEL_);

#define P4IN_                 0x001C    /* Port 4 Input */
const_sfrb(P4IN, P4IN_);
#define P4OUT_                0x001D    /* Port 4 Output */
sfrb(P4OUT, P4OUT_);
#define P4DIR_                0x001E    /* Port 4 Direction */
sfrb(P4DIR, P4DIR_);
#define P4SEL_                0x001F    /* Port 4 Selection */
sfrb(P4SEL, P4SEL_);

/************************************************************
* DIGITAL I/O Port5/6
************************************************************/
#define __MSP430_HAS_PORT5__          /* Definition to show that Module is available */
#define __MSP430_HAS_PORT6__          /* Definition to show that Module is available */

#define P5IN_                 0x0030    /* Port 5 Input */
const_sfrb(P5IN, P5IN_);
#define P5OUT_                0x0031    /* Port 5 Output */
sfrb(P5OUT, P5OUT_);
#define P5DIR_                0x0032    /* Port 5 Direction */
sfrb(P5DIR, P5DIR_);
#define P5SEL_                0x0033    /* Port 5 Selection */
sfrb(P5SEL, P5SEL_);

#define P6IN_                 0x0034    /* Port 6 Input */
const_sfrb(P6IN, P6IN_);
#define P6OUT_                0x0035    /* Port 6 Output */
sfrb(P6OUT, P6OUT_);
#define P6DIR_                0x0036    /* Port 6 Direction */
sfrb(P6DIR, P6DIR_);
#define P6SEL_                0x0037    /* Port 6 Selection */
sfrb(P6SEL, P6SEL_);

/************************************************************
* DIGITAL I/O Port7
************************************************************/
#define __MSP430_HAS_PORT7__          /* Definition to show that Module is available */

#define P7IN_                 0x0038    /* Port 7 Input */
const_sfrb(P7IN, P7IN_);
#define P7OUT_                0x0039    /* Port 7 Output */
sfrb(P7OUT, P7OUT_);
#define P7DIR_                0x003A    /* Port 7 Direction */
sfrb(P7DIR, P7DIR_);
#define P7SEL_                0x003B    /* Port 7 Selection */
sfrb(P7SEL, P7SEL_);

/************************************************************
* Brown-Out, Supply Voltage Supervision (SVS)
************************************************************/
#define __MSP430_HAS_SVS__            /* Definition to show that Module is available */

#define SVSCTL_               0x0056    /* SVS Control */
sfrb(SVSCTL, SVSCTL_);
#define SVSFG               (0x01)    /* SVS Flag */
#define SVSOP               (0x02)    /* SVS output (read only) */
#define SVSON               (0x04)    /* Switches the SVS on/off */
#define PORON               (0x08)    /* Enable POR Generation if Low Voltage */
#define VLD0                (0x10)
#define VLD1                (0x20)
#define VLD2                (0x40)
#define VLD3                (0x80)

#define VLDON               (0x10)
#define VLDOFF              (0x00)
#define VLD_1_8V            (0x10)

/************************************************************
* Timer0_A3
************************************************************/
#define __MSP430_HAS_TA3__            /* Definition to show that Module is available */

#define TA0IV_                0x012E    /* Timer0_A3 Interrupt Vector Word */
const_sfrw(TA0IV, TA0IV_);
#define TA0CTL_               0x0160    /* Timer0_A3 Control */
sfrw(TA0CTL, TA0CTL_);
#define TA0CCTL0_             0x0162    /* Timer0_A3 Capture/Compare Control 0 */
sfrw(TA0CCTL0, TA0CCTL0_);
#define TA0CCTL1_             0x0164    /* Timer0_A3 Capture/Compare Control 1 */
sfrw(TA0CCTL1, TA0CCTL1_);
#define TA0CCTL2_             0x0166    /* Timer0_A3 Capture/Compare Control 2 */
sfrw(TA0CCTL2, TA0CCTL2_);
#define TA0R_                 0x0170    /* Timer0_A3 */
sfrw(TA0R, TA0R_);
#define TA0CCR0_              0x0172    /* Timer0_A3 Capture/Compare 0 */
sfrw(TA0CCR0, TA0CCR0_);
#define TA0CCR1_              0x0174    /* Timer0_A3 Capture/Compare 1 */
sfrw(TA0CCR1, TA0CCR1_);
#define TA0CCR2_              0x0176    /* Timer0_A3 Capture/Compare 2 */
sfrw(TA0CCR2, TA0CCR2_);

/* Alternate register names */
#define TAIV                TA0IV     /* Timer A Interrupt Vector Word */
#define TACTL               TA0CTL    /* Timer A Control */
#define TACCTL0             TA0CCTL0  /* Timer A Capture/Compare Control 0 */
#define TACCTL1             TA0CCTL1  /* Timer A Capture/Compare Control 1 */
#define TACCTL2             TA0CCTL2  /* Timer A Capture/Compare Control 2 */
#define TAR                 TA0R      /* Timer A */
#define TACCR0              TA0CCR0   /* Timer A Capture/Compare 0 */
#define TACCR1              TA0CCR1   /* Timer A Capture/Compare 1 */
#define TACCR2              TA0CCR2   /* Timer A Capture/Compare 2 */
#define TAIV_               TA0IV_    /* Timer A Interrupt Vector Word */
#define TACTL_              TA0CTL_   /* Timer A Control */
#define TACCTL0_            TA0CCTL0_ /* Timer A Capture/Compare Control 0 */
#define TACCTL1_            TA0CCTL1_ /* Timer A Capture/Compare Control 1 */
#define TACCTL2_            TA0CCTL2_ /* Timer A Capture/Compare Control 2 */
#define TAR_                TA0R_     /* Timer A */
#define TACCR0_             TA0CCR0_  /* Timer A Capture/Compare 0 */
#define TACCR1_             TA0CCR1_  /* Timer A Capture/Compare 1 */
#define TACCR2_             TA0CCR2_  /* Timer A Capture/Compare 2 */

/* Alternate register names 2 */
#define CCTL0               TACCTL0   /* Timer A Capture/Compare Control 0 */
#define CCTL1               TACCTL1   /* Timer A Capture/Compare Control 1 */
#define CCTL2               TACCTL2   /* Timer A Capture/Compare Control 2 */
#define CCR0                TACCR0    /* Timer A Capture/Compare 0 */
#define CCR1                TACCR1    /* Timer A Capture/Compare 1 */
#define CCR2                TACCR2    /* Timer A Capture/Compare 2 */
#define CCTL0_              TACCTL0_  /* Timer A Capture/Compare Control 0 */
#define CCTL1_              TACCTL1_  /* Timer A Capture/Compare Control 1 */
#define CCTL2_              TACCTL2_  /* Timer A Capture/Compare Control 2 */
#define CCR0_               TACCR0_   /* Timer A Capture/Compare 0 */
#define CCR1_               TACCR1_   /* Timer A Capture/Compare 1 */
#define CCR2_               TACCR2_   /* Timer A Capture/Compare 2 */

#define TASSEL1             (0x0200)  /* Timer A clock source select 1 */
#define TASSEL0             (0x0100)  /* Timer A clock source select 0 */
#define ID1                 (0x0080)  /* Timer A clock input divider 1 */
#define ID0                 (0x0040)  /* Timer A clock input divider 0 */
#define MC1                 (0x0020)  /* Timer A mode control 1 */
#define MC0                 (0x0010)  /* Timer A mode control 0 */
#define TACLR               (0x0004)  /* Timer A counter clear */
#define TAIE                (0x0002)  /* Timer A counter interrupt enable */
#define TAIFG               (0x0001)  /* Timer A counter interrupt flag */

#define MC_0                (0x0000)  /* Timer A mode control: 0 - Stop */
#define MC_1                (0x0010)  /* Timer A mode control: 1 - Up to CCR0 */
#define MC_2                (0x0020)  /* Timer A mode control: 2 - Continous up */
#define MC_3                (0x0030)  /* Timer A mode control: 3 - Up/Down */
#define ID_0                (0x0000)  /* Timer A input divider: 0 - /1 */
#define ID_1                (0x0040)  /* Timer A input divider: 1 - /2 */
#define ID_2                (0x0080)  /* Timer A input divider: 2 - /4 */
#define ID_3                (0x00C0)  /* Timer A input divider: 3 - /8 */
#define TASSEL_0            (0x0000) /* Timer A clock source select: 0 - TACLK */
#define TASSEL_1            (0x0100) /* Timer A clock source select: 1 - ACLK  */
#define TASSEL_2            (0x0200) /* Timer A clock source select: 2 - SMCLK */
#define TASSEL_3            (0x0300) /* Timer A clock source select: 3 - INCLK */

#define CM1                 (0x8000)  /* Capture mode 1 */
#define CM0                 (0x4000)  /* Capture mode 0 */
#define CCIS1               (0x2000)  /* Capture input select 1 */
#define CCIS0               (0x1000)  /* Capture input select 0 */
#define SCS                 (0x0800)  /* Capture sychronize */
#define SCCI                (0x0400)  /* Latched capture signal (read) */
#define CAP                 (0x0100)  /* Capture mode: 1 /Compare mode : 0 */
#define OUTMOD2             (0x0080)  /* Output mode 2 */
#define OUTMOD1             (0x0040)  /* Output mode 1 */
#define OUTMOD0             (0x0020)  /* Output mode 0 */
#define CCIE                (0x0010)  /* Capture/compare interrupt enable */
#define CCI                 (0x0008)  /* Capture input signal (read) */
#define OUT                 (0x0004)  /* PWM Output signal if output mode 0 */
#define COV                 (0x0002)  /* Capture/compare overflow flag */
#define CCIFG               (0x0001)  /* Capture/compare interrupt flag */

#define OUTMOD_0            (0x0000)  /* PWM output mode: 0 - output only */
#define OUTMOD_1            (0x0020)  /* PWM output mode: 1 - set */
#define OUTMOD_2            (0x0040)  /* PWM output mode: 2 - PWM toggle/reset */
#define OUTMOD_3            (0x0060)  /* PWM output mode: 3 - PWM set/reset */
#define OUTMOD_4            (0x0080)  /* PWM output mode: 4 - toggle */
#define OUTMOD_5            (0x00A0)  /* PWM output mode: 5 - Reset */
#define OUTMOD_6            (0x00C0)  /* PWM output mode: 6 - PWM toggle/set */
#define OUTMOD_7            (0x00E0)  /* PWM output mode: 7 - PWM reset/set */
#define CCIS_0              (0x0000) /* Capture input select: 0 - CCIxA */
#define CCIS_1              (0x1000) /* Capture input select: 1 - CCIxB */
#define CCIS_2              (0x2000) /* Capture input select: 2 - GND */
#define CCIS_3              (0x3000) /* Capture input select: 3 - Vcc */
#define CM_0                (0x0000) /* Capture mode: 0 - disabled */
#define CM_1                (0x4000) /* Capture mode: 1 - pos. edge */
#define CM_2                (0x8000) /* Capture mode: 1 - neg. edge */
#define CM_3                (0xC000) /* Capture mode: 1 - both edges */

/* T0_A3IV Definitions */
#define TA0IV_NONE          (0x0000)    /* No Interrupt pending */
#define TA0IV_TACCR1        (0x0002)    /* TA0CCR1_CCIFG */
#define TA0IV_TACCR2        (0x0004)    /* TA0CCR2_CCIFG */
#define TA0IV_6             (0x0006)    /* Reserved */
#define TA0IV_8             (0x0008)    /* Reserved */
#define TA0IV_TAIFG         (0x000A)    /* TA0IFG */

/************************************************************
* Timer1_A5
************************************************************/
#define __MSP430_HAS_T1A5__           /* Definition to show that Module is available */

#define TA1IV_                0x011E    /* Timer1_A5 Interrupt Vector Word */
const_sfrw(TA1IV, TA1IV_);
#define TA1CTL_               0x0180    /* Timer1_A5 Control */
sfrw(TA1CTL, TA1CTL_);
#define TA1CCTL0_             0x0182    /* Timer1_A5 Capture/Compare Control 0 */
sfrw(TA1CCTL0, TA1CCTL0_);
#define TA1CCTL1_             0x0184    /* Timer1_A5 Capture/Compare Control 1 */
sfrw(TA1CCTL1, TA1CCTL1_);
#define TA1CCTL2_             0x0186    /* Timer1_A5 Capture/Compare Control 2 */
sfrw(TA1CCTL2, TA1CCTL2_);
#define TA1CCTL3_             0x0188    /* Timer1_A5 Capture/Compare Control 3 */
sfrw(TA1CCTL3, TA1CCTL3_);
#define TA1CCTL4_             0x018A    /* Timer1_A5 Capture/Compare Control 4 */
sfrw(TA1CCTL4, TA1CCTL4_);
#define TA1R_                 0x0190    /* Timer1_A5 */
sfrw(TA1R, TA1R_);
#define TA1CCR0_              0x0192    /* Timer1_A5 Capture/Compare 0 */
sfrw(TA1CCR0, TA1CCR0_);
#define TA1CCR1_              0x0194    /* Timer1_A5 Capture/Compare 1 */
sfrw(TA1CCR1, TA1CCR1_);
#define TA1CCR2_              0x0196    /* Timer1_A5 Capture/Compare 2 */
sfrw(TA1CCR2, TA1CCR2_);
#define TA1CCR3_              0x0198    /* Timer1_A5 Capture/Compare 3 */
sfrw(TA1CCR3, TA1CCR3_);
#define TA1CCR4_              0x019A    /* Timer1_A5 Capture/Compare 4 */
sfrw(TA1CCR4, TA1CCR4_);

/* Bits are already defined within the Timer0_Ax */

/* T1_A5IV Definitions */
#define TA1IV_NONE          (0x0000)    /* No Interrupt pending */
#define TA1IV_TACCR1        (0x0002)    /* TA1CCR1_CCIFG */
#define TA1IV_TACCR2        (0x0004)    /* TA1CCR2_CCIFG */
#define TA1IV_TACCR3        (0x0006)    /* TA1CCR3_CCIFG */
#define TA1IV_TACCR4        (0x0008)    /* TA1CCR4_CCIFG */
#define TA1IV_TAIFG         (0x000A)    /* TA1IFG */

/************************************************************
* USCI
************************************************************/
#define __MSP430_HAS_USCI__           /* Definition to show that Module is available */

#define UCA0CTL0_             0x0060    /* USCI A0 Control Register 0 */
sfrb(UCA0CTL0, UCA0CTL0_);
#define UCA0CTL1_             0x0061    /* USCI A0 Control Register 1 */
sfrb(UCA0CTL1, UCA0CTL1_);
#define UCA0BR0_              0x0062    /* USCI A0 Baud Rate 0 */
sfrb(UCA0BR0, UCA0BR0_);
#define UCA0BR1_              0x0063    /* USCI A0 Baud Rate 1 */
sfrb(UCA0BR1, UCA0BR1_);
#define UCA0MCTL_             0x0064    /* USCI A0 Modulation Control */
sfrb(UCA0MCTL, UCA0MCTL_);
#define UCA0STAT_             0x0065    /* USCI A0 Status Register */
sfrb(UCA0STAT, UCA0STAT_);
#define UCA0RXBUF_            0x0066    /* USCI A0 Receive Buffer */
const_sfrb(UCA0RXBUF, UCA0RXBUF_);
#define UCA0TXBUF_            0x0067    /* USCI A0 Transmit Buffer */
sfrb(UCA0TXBUF, UCA0TXBUF_);
#define UCA0ABCTL_            0x005D    /* USCI A0 LIN Control */
sfrb(UCA0ABCTL, UCA0ABCTL_);
#define UCA0IRTCTL_           0x005E    /* USCI A0 IrDA Transmit Control */
sfrb(UCA0IRTCTL, UCA0IRTCTL_);
#define UCA0IRRCTL_           0x005F    /* USCI A0 IrDA Receive Control */
sfrb(UCA0IRRCTL, UCA0IRRCTL_);



#define UCB0CTL0_             0x0068    /* USCI B0 Control Register 0 */
sfrb(UCB0CTL0, UCB0CTL0_);
#define UCB0CTL1_             0x0069    /* USCI B0 Control Register 1 */
sfrb(UCB0CTL1, UCB0CTL1_);
#define UCB0BR0_              0x006A    /* USCI B0 Baud Rate 0 */
sfrb(UCB0BR0, UCB0BR0_);
#define UCB0BR1_              0x006B    /* USCI B0 Baud Rate 1 */
sfrb(UCB0BR1, UCB0BR1_);
#define UCB0I2CIE_            0x006C    /* USCI B0 I2C Interrupt Enable Register */
sfrb(UCB0I2CIE, UCB0I2CIE_);
#define UCB0STAT_             0x006D    /* USCI B0 Status Register */
sfrb(UCB0STAT, UCB0STAT_);
#define UCB0RXBUF_            0x006E    /* USCI B0 Receive Buffer */
const_sfrb(UCB0RXBUF, UCB0RXBUF_);
#define UCB0TXBUF_            0x006F    /* USCI B0 Transmit Buffer */
sfrb(UCB0TXBUF, UCB0TXBUF_);
#define UCB0I2COA_            0x0118    /* USCI B0 I2C Own Address */
sfrw(UCB0I2COA, UCB0I2COA_);
#define UCB0I2CSA_            0x011A    /* USCI B0 I2C Slave Address */
sfrw(UCB0I2CSA, UCB0I2CSA_);

// UART-Mode Bits
#define UCPEN               (0x80)    /* Async. Mode: Parity enable */
#define UCPAR               (0x40)    /* Async. Mode: Parity     0:odd / 1:even */
#define UCMSB               (0x20)    /* Async. Mode: MSB first  0:LSB / 1:MSB */
#define UC7BIT              (0x10)    /* Async. Mode: Data Bits  0:8-bits / 1:7-bits */
#define UCSPB               (0x08)    /* Async. Mode: Stop Bits  0:one / 1: two */
#define UCMODE1             (0x04)    /* Async. Mode: USCI Mode 1 */
#define UCMODE0             (0x02)    /* Async. Mode: USCI Mode 0 */
#define UCSYNC              (0x01)    /* Sync-Mode  0:UART-Mode / 1:SPI-Mode */

// SPI-Mode Bits
#define UCCKPH              (0x80)    /* Sync. Mode: Clock Phase */
#define UCCKPL              (0x40)    /* Sync. Mode: Clock Polarity */
#define UCMST               (0x08)    /* Sync. Mode: Master Select */

// I2C-Mode Bits
#define UCA10               (0x80)    /* 10-bit Address Mode */
#define UCSLA10             (0x40)    /* 10-bit Slave Address Mode */
#define UCMM                (0x20)    /* Multi-Master Environment */
//#define res               (0x10)    /* reserved */
#define UCMODE_0            (0x00)    /* Sync. Mode: USCI Mode: 0 */
#define UCMODE_1            (0x02)    /* Sync. Mode: USCI Mode: 1 */
#define UCMODE_2            (0x04)    /* Sync. Mode: USCI Mode: 2 */
#define UCMODE_3            (0x06)    /* Sync. Mode: USCI Mode: 3 */

// UART-Mode Bits
#define UCSSEL1             (0x80)    /* USCI 0 Clock Source Select 1 */
#define UCSSEL0             (0x40)    /* USCI 0 Clock Source Select 0 */
#define UCRXEIE             (0x20)    /* RX Error interrupt enable */
#define UCBRKIE             (0x10)    /* Break interrupt enable */
#define UCDORM              (0x08)    /* Dormant (Sleep) Mode */
#define UCTXADDR            (0x04)    /* Send next Data as Address */
#define UCTXBRK             (0x02)    /* Send next Data as Break */
#define UCSWRST             (0x01)    /* USCI Software Reset */

// SPI-Mode Bits
//#define res               (0x20)    /* reserved */
//#define res               (0x10)    /* reserved */
//#define res               (0x08)    /* reserved */
//#define res               (0x04)    /* reserved */
//#define res               (0x02)    /* reserved */

// I2C-Mode Bits
//#define res               (0x20)    /* reserved */
#define UCTR                (0x10)    /* Transmit/Receive Select/Flag */
#define UCTXNACK            (0x08)    /* Transmit NACK */
#define UCTXSTP             (0x04)    /* Transmit STOP */
#define UCTXSTT             (0x02)    /* Transmit START */
#define UCSSEL_0            (0x00)    /* USCI 0 Clock Source: 0 */
#define UCSSEL_1            (0x40)    /* USCI 0 Clock Source: 1 */
#define UCSSEL_2            (0x80)    /* USCI 0 Clock Source: 2 */
#define UCSSEL_3            (0xC0)    /* USCI 0 Clock Source: 3 */

#define UCBRF3              (0x80)    /* USCI First Stage Modulation Select 3 */
#define UCBRF2              (0x40)    /* USCI First Stage Modulation Select 2 */
#define UCBRF1              (0x20)    /* USCI First Stage Modulation Select 1 */
#define UCBRF0              (0x10)    /* USCI First Stage Modulation Select 0 */
#define UCBRS2              (0x08)    /* USCI Second Stage Modulation Select 2 */
#define UCBRS1              (0x04)    /* USCI Second Stage Modulation Select 1 */
#define UCBRS0              (0x02)    /* USCI Second Stage Modulation Select 0 */
#define UCOS16              (0x01)    /* USCI 16-times Oversampling enable */

#define UCBRF_0             (0x00)    /* USCI First Stage Modulation: 0 */
#define UCBRF_1             (0x10)    /* USCI First Stage Modulation: 1 */
#define UCBRF_2             (0x20)    /* USCI First Stage Modulation: 2 */
#define UCBRF_3             (0x30)    /* USCI First Stage Modulation: 3 */
#define UCBRF_4             (0x40)    /* USCI First Stage Modulation: 4 */
#define UCBRF_5             (0x50)    /* USCI First Stage Modulation: 5 */
#define UCBRF_6             (0x60)    /* USCI First Stage Modulation: 6 */
#define UCBRF_7             (0x70)    /* USCI First Stage Modulation: 7 */
#define UCBRF_8             (0x80)    /* USCI First Stage Modulation: 8 */
#define UCBRF_9             (0x90)    /* USCI First Stage Modulation: 9 */
#define UCBRF_10            (0xA0)    /* USCI First Stage Modulation: A */
#define UCBRF_11            (0xB0)    /* USCI First Stage Modulation: B */
#define UCBRF_12            (0xC0)    /* USCI First Stage Modulation: C */
#define UCBRF_13            (0xD0)    /* USCI First Stage Modulation: D */
#define UCBRF_14            (0xE0)    /* USCI First Stage Modulation: E */
#define UCBRF_15            (0xF0)    /* USCI First Stage Modulation: F */

#define UCBRS_0             (0x00)    /* USCI Second Stage Modulation: 0 */
#define UCBRS_1             (0x02)    /* USCI Second Stage Modulation: 1 */
#define UCBRS_2             (0x04)    /* USCI Second Stage Modulation: 2 */
#define UCBRS_3             (0x06)    /* USCI Second Stage Modulation: 3 */
#define UCBRS_4             (0x08)    /* USCI Second Stage Modulation: 4 */
#define UCBRS_5             (0x0A)    /* USCI Second Stage Modulation: 5 */
#define UCBRS_6             (0x0C)    /* USCI Second Stage Modulation: 6 */
#define UCBRS_7             (0x0E)    /* USCI Second Stage Modulation: 7 */

#define UCLISTEN            (0x80)    /* USCI Listen mode */
#define UCFE                (0x40)    /* USCI Frame Error Flag */
#define UCOE                (0x20)    /* USCI Overrun Error Flag */
#define UCPE                (0x10)    /* USCI Parity Error Flag */
#define UCBRK               (0x08)    /* USCI Break received */
#define UCRXERR             (0x04)    /* USCI RX Error Flag */
#define UCADDR              (0x02)    /* USCI Address received Flag */
#define UCBUSY              (0x01)    /* USCI Busy Flag */
#define UCIDLE              (0x02)    /* USCI Idle line detected Flag */

//#define res               (0x80)    /* reserved */
//#define res               (0x40)    /* reserved */
//#define res               (0x20)    /* reserved */
//#define res               (0x10)    /* reserved */
#define UCNACKIE            (0x08)    /* NACK Condition interrupt enable */
#define UCSTPIE             (0x04)    /* STOP Condition interrupt enable */
#define UCSTTIE             (0x02)    /* START Condition interrupt enable */
#define UCALIE              (0x01)    /* Arbitration Lost interrupt enable */


#define UCSCLLOW            (0x40)    /* SCL low */
#define UCGC                (0x20)    /* General Call address received Flag */
#define UCBBUSY             (0x10)    /* Bus Busy Flag */
#define UCNACKIFG           (0x08)    /* NAK Condition interrupt Flag */
#define UCSTPIFG            (0x04)    /* STOP Condition interrupt Flag */
#define UCSTTIFG            (0x02)    /* START Condition interrupt Flag */
#define UCALIFG             (0x01)    /* Arbitration Lost interrupt Flag */

#define UCIRTXPL5           (0x80)    /* IRDA Transmit Pulse Length 5 */
#define UCIRTXPL4           (0x40)    /* IRDA Transmit Pulse Length 4 */
#define UCIRTXPL3           (0x20)    /* IRDA Transmit Pulse Length 3 */
#define UCIRTXPL2           (0x10)    /* IRDA Transmit Pulse Length 2 */
#define UCIRTXPL1           (0x08)    /* IRDA Transmit Pulse Length 1 */
#define UCIRTXPL0           (0x04)    /* IRDA Transmit Pulse Length 0 */
#define UCIRTXCLK           (0x02)    /* IRDA Transmit Pulse Clock Select */
#define UCIREN              (0x01)    /* IRDA Encoder/Decoder enable */

#define UCIRRXFL5           (0x80)    /* IRDA Receive Filter Length 5 */
#define UCIRRXFL4           (0x40)    /* IRDA Receive Filter Length 4 */
#define UCIRRXFL3           (0x20)    /* IRDA Receive Filter Length 3 */
#define UCIRRXFL2           (0x10)    /* IRDA Receive Filter Length 2 */
#define UCIRRXFL1           (0x08)    /* IRDA Receive Filter Length 1 */
#define UCIRRXFL0           (0x04)    /* IRDA Receive Filter Length 0 */
#define UCIRRXPL            (0x02)    /* IRDA Receive Input Polarity */
#define UCIRRXFE            (0x01)    /* IRDA Receive Filter enable */

//#define res               (0x80)    /* reserved */
//#define res               (0x40)    /* reserved */
#define UCDELIM1            (0x20)    /* Break Sync Delimiter 1 */
#define UCDELIM0            (0x10)    /* Break Sync Delimiter 0 */
#define UCSTOE              (0x08)    /* Sync-Field Timeout error */
#define UCBTOE              (0x04)    /* Break Timeout error */
//#define res               (0x02)    /* reserved */
#define UCABDEN             (0x01)    /* Auto Baud Rate detect enable */

#define UCGCEN              (0x8000)  /* I2C General Call enable */
#define UCOA9               (0x0200)  /* I2C Own Address 9 */
#define UCOA8               (0x0100)  /* I2C Own Address 8 */
#define UCOA7               (0x0080)  /* I2C Own Address 7 */
#define UCOA6               (0x0040)  /* I2C Own Address 6 */
#define UCOA5               (0x0020)  /* I2C Own Address 5 */
#define UCOA4               (0x0010)  /* I2C Own Address 4 */
#define UCOA3               (0x0008)  /* I2C Own Address 3 */
#define UCOA2               (0x0004)  /* I2C Own Address 2 */
#define UCOA1               (0x0002)  /* I2C Own Address 1 */
#define UCOA0               (0x0001)  /* I2C Own Address 0 */

#define UCSA9               (0x0200)  /* I2C Slave Address 9 */
#define UCSA8               (0x0100)  /* I2C Slave Address 8 */
#define UCSA7               (0x0080)  /* I2C Slave Address 7 */
#define UCSA6               (0x0040)  /* I2C Slave Address 6 */
#define UCSA5               (0x0020)  /* I2C Slave Address 5 */
#define UCSA4               (0x0010)  /* I2C Slave Address 4 */
#define UCSA3               (0x0008)  /* I2C Slave Address 3 */
#define UCSA2               (0x0004)  /* I2C Slave Address 2 */
#define UCSA1               (0x0002)  /* I2C Slave Address 1 */
#define UCSA0               (0x0001)  /* I2C Slave Address 0 */

/************************************************************
* WATCHDOG TIMER
************************************************************/
#define __MSP430_HAS_WDT__            /* Definition to show that Module is available */

#define WDTCTL_               0x0120    /* Watchdog Timer Control */
sfrw(WDTCTL, WDTCTL_);
/* The bit names have been prefixed with "WDT" */
#define WDTIS0              (0x0001)
#define WDTIS1              (0x0002)
#define WDTSSEL             (0x0004)
#define WDTCNTCL            (0x0008)
#define WDTTMSEL            (0x0010)
#define WDTNMI              (0x0020)
#define WDTNMIES            (0x0040)
#define WDTHOLD             (0x0080)

#define WDTPW               (0x5A00)

/* WDT-interval times [1ms] coded with Bits 0-2 */
/* WDT is clocked by fSMCLK (assumed 1MHz) */
#define WDT_MDLY_32         (WDTPW+WDTTMSEL+WDTCNTCL)                         /* 32ms interval (default) */
#define WDT_MDLY_8          (WDTPW+WDTTMSEL+WDTCNTCL+WDTIS0)                  /* 8ms     " */
#define WDT_MDLY_0_5        (WDTPW+WDTTMSEL+WDTCNTCL+WDTIS1)                  /* 0.5ms   " */
#define WDT_MDLY_0_064      (WDTPW+WDTTMSEL+WDTCNTCL+WDTIS1+WDTIS0)           /* 0.064ms " */
/* WDT is clocked by fACLK (assumed 32KHz) */
#define WDT_ADLY_1000       (WDTPW+WDTTMSEL+WDTCNTCL+WDTSSEL)                 /* 1000ms  " */
#define WDT_ADLY_250        (WDTPW+WDTTMSEL+WDTCNTCL+WDTSSEL+WDTIS0)          /* 250ms   " */
#define WDT_ADLY_16         (WDTPW+WDTTMSEL+WDTCNTCL+WDTSSEL+WDTIS1)          /* 16ms    " */
#define WDT_ADLY_1_9        (WDTPW+WDTTMSEL+WDTCNTCL+WDTSSEL+WDTIS1+WDTIS0)   /* 1.9ms   " */
/* Watchdog mode -> reset after expired time */
/* WDT is clocked by fSMCLK (assumed 1MHz) */
#define WDT_MRST_32         (WDTPW+WDTCNTCL)                                  /* 32ms interval (default) */
#define WDT_MRST_8          (WDTPW+WDTCNTCL+WDTIS0)                           /* 8ms     " */
#define WDT_MRST_0_5        (WDTPW+WDTCNTCL+WDTIS1)                           /* 0.5ms   " */
#define WDT_MRST_0_064      (WDTPW+WDTCNTCL+WDTIS1+WDTIS0)                    /* 0.064ms " */
/* WDT is clocked by fACLK (assumed 32KHz) */
#define WDT_ARST_1000       (WDTPW+WDTCNTCL+WDTSSEL)                          /* 1000ms  " */
#define WDT_ARST_250        (WDTPW+WDTCNTCL+WDTSSEL+WDTIS0)                   /* 250ms   " */
#define WDT_ARST_16         (WDTPW+WDTCNTCL+WDTSSEL+WDTIS1)                   /* 16ms    " */
#define WDT_ARST_1_9        (WDTPW+WDTCNTCL+WDTSSEL+WDTIS1+WDTIS0)            /* 1.9ms   " */

/* INTERRUPT CONTROL */
/* These two bits are defined in the Special Function Registers */
/* #define WDTIE               0x01 */
/* #define WDTIFG              0x01 */

/************************************************************
* Interrupt Vectors (offset from 0xFFE0)
************************************************************/

#define BASICTIMER_VECTOR   (0x0000)  /* 0xFFE0 Basic Timer */
#define PORT2_VECTOR        (0x0002)  /* 0xFFE2 Port 2 */
#define PORT1_VECTOR        (0x0008)  /* 0xFFE8 Port 1 */
#define TIMER0_A1_VECTOR    (0x000A)  /* 0xFFEA Timer0_A CC1-2, TA0 */
#define TIMER0_A0_VECTOR    (0x000C)  /* 0xFFEC Timer0_A CC0 */
#define ADC10_VECTOR        (0x000E)  /* 0xFFEE ADC10 */
#define USCIAB0TX_VECTOR    (0x0010)  /* 0xFFF0 USCI A0/B0 Transmit */
#define USCIAB0RX_VECTOR    (0x0012)  /* 0xFFF2 USCI A0/B0 Receive */
#define WDT_VECTOR          (0x0014) /* 0xFFF4 Watchdog Timer */
#define COMPARATORA_VECTOR  (0x0016) /* 0xFFF6 Comparator A */
#define TIMER1_A1_VECTOR    (0x0018) /* 0xFFF8 Timer1_A CC1-4, TA1 */
#define TIMER1_A0_VECTOR    (0x001A) /* 0xFFFA Timer1_A CC0 */
#define NMI_VECTOR          (0x001C) /* 0xFFFC Non-maskable */
#define RESET_VECTOR        (0x001E) /* 0xFFFE Reset [Highest Priority] */

/* Alternate Names */
#define TIMERA1_VECTOR      TIMER0_A1_VECTOR
#define TIMERA0_VECTOR      TIMER0_A0_VECTOR

/************************************************************
* End of Modules
************************************************************/
#ifdef __cplusplus
}
#endif /* extern "C" */

#endif /* #ifndef __msp430x41x2 */