/usr/msp430/include/msp430xg43x.h is in msp430mcu 20120406-2.
This file is owned by root:root, with mode 0o644.
The actual contents of the file can be viewed below.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765 766 767 768 769 770 771 772 773 774 775 776 777 778 779 780 781 782 783 784 785 786 787 788 789 790 791 792 793 794 795 796 797 798 799 800 801 802 803 804 805 806 807 808 809 810 811 812 813 814 815 816 817 818 819 820 821 822 823 824 825 826 827 828 829 830 831 832 833 834 835 836 837 838 839 840 841 842 843 844 845 846 847 848 849 850 851 852 853 854 855 856 857 858 859 860 861 862 863 864 865 866 867 868 869 870 871 872 873 874 875 876 877 878 879 880 881 882 883 884 885 886 887 888 889 890 891 892 893 894 895 896 897 898 899 900 901 902 903 904 905 906 907 908 909 910 911 912 913 914 915 916 917 918 919 920 921 922 923 924 925 926 927 928 929 930 931 932 933 934 935 936 937 938 939 940 941 942 943 944 945 946 947 948 949 950 951 952 953 954 955 956 957 958 959 960 961 962 963 964 965 966 967 968 969 970 971 972 973 974 975 976 977 978 979 980 981 982 983 984 985 986 987 988 989 990 991 992 993 994 995 996 997 998 999 1000 1001 1002 1003 1004 1005 1006 1007 1008 1009 1010 1011 1012 1013 1014 1015 1016 1017 1018 1019 1020 1021 1022 1023 1024 1025 1026 1027 1028 1029 1030 1031 1032 1033 1034 1035 1036 1037 1038 1039 1040 1041 1042 1043 1044 1045 1046 1047 1048 1049 1050 1051 1052 1053 1054 1055 1056 1057 1058 1059 1060 1061 1062 1063 1064 1065 1066 1067 1068 1069 1070 1071 1072 1073 1074 1075 1076 1077 1078 1079 1080 1081 1082 1083 1084 1085 1086 1087 1088 1089 1090 1091 1092 1093 1094 1095 1096 1097 1098 1099 1100 1101 1102 1103 1104 1105 1106 1107 1108 1109 1110 1111 1112 1113 1114 1115 1116 1117 1118 1119 1120 1121 1122 1123 1124 1125 1126 1127 1128 1129 1130 1131 1132 1133 1134 1135 1136 1137 1138 1139 1140 1141 1142 1143 1144 1145 1146 1147 1148 1149 1150 1151 1152 1153 1154 1155 1156 1157 1158 1159 1160 1161 1162 1163 1164 1165 1166 1167 1168 1169 1170 1171 1172 1173 1174 1175 1176 1177 1178 1179 1180 1181 1182 1183 1184 1185 1186 1187 1188 1189 1190 1191 1192 1193 1194 1195 1196 1197 1198 1199 1200 1201 1202 1203 1204 1205 1206 1207 1208 1209 1210 1211 1212 1213 1214 1215 1216 1217 1218 1219 1220 1221 1222 1223 1224 1225 1226 1227 1228 1229 1230 1231 1232 1233 1234 1235 1236 1237 1238 1239 1240 1241 1242 1243 1244 1245 1246 1247 1248 1249 1250 1251 1252 1253 1254 1255 1256 1257 1258 1259 1260 1261 1262 1263 1264 1265 1266 1267 1268 1269 1270 1271 1272 1273 1274 1275 1276 1277 1278 1279 1280 1281 1282 1283 1284 1285 1286 1287 1288 1289 1290 1291 1292 1293 1294 1295 1296 1297 1298 1299 1300 1301 1302 1303 1304 1305 1306 1307 1308 1309 1310 1311 1312 1313 1314 1315 1316 1317 1318 1319 1320 1321 1322 1323 1324 1325 1326 1327 1328 1329 1330 1331 1332 1333 1334 1335 1336 1337 1338 1339 1340 1341 1342 1343 1344 1345 1346 1347 1348 1349 1350 1351 1352 1353 1354 1355 1356 1357 1358 1359 1360 1361 1362 1363 1364 1365 1366 1367 1368 1369 1370 1371 1372 1373 1374 1375 1376 1377 1378 1379 1380 1381 1382 1383 1384 1385 1386 1387 1388 1389 1390 1391 1392 1393 1394 1395 1396 1397 1398 1399 1400 1401 1402 1403 1404 1405 1406 1407 1408 1409 1410 1411 1412 1413 1414 1415 1416 1417 1418 1419 1420 1421 1422 1423 1424 1425 1426 1427 1428 1429 1430 1431 1432 1433 1434 1435 1436 1437 1438 1439 1440 1441 1442 1443 1444 1445 1446 1447 1448 1449 1450 1451 1452 1453 1454 1455 1456 1457 1458 1459 1460 1461 1462 1463 1464 1465 1466 1467 1468 1469 1470 1471 1472 1473 1474 1475 1476 1477 1478 1479 1480 1481 1482 1483 1484 1485 1486 1487 1488 1489 1490 1491 1492 1493 1494 1495 1496 1497 1498 1499 1500 1501 1502 | /* ============================================================================ */
/* Copyright (c) 2012, Texas Instruments Incorporated */
/* All rights reserved. */
/* */
/* Redistribution and use in source and binary forms, with or without */
/* modification, are permitted provided that the following conditions */
/* are met: */
/* */
/* * Redistributions of source code must retain the above copyright */
/* notice, this list of conditions and the following disclaimer. */
/* */
/* * Redistributions in binary form must reproduce the above copyright */
/* notice, this list of conditions and the following disclaimer in the */
/* documentation and/or other materials provided with the distribution. */
/* */
/* * Neither the name of Texas Instruments Incorporated nor the names of */
/* its contributors may be used to endorse or promote products derived */
/* from this software without specific prior written permission. */
/* */
/* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" */
/* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, */
/* THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR */
/* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR */
/* CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, */
/* EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, */
/* PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; */
/* OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, */
/* WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR */
/* OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, */
/* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */
/* ============================================================================ */
/******************************************************************************/
/* Legacy Header File */
/* Not recommended for use in new projects. */
/* Please use the msp430.h file or the device specific header file */
/******************************************************************************/
/********************************************************************
*
* Standard register and bit definitions for the Texas Instruments
* MSP430 microcontroller.
*
* This file supports assembler and C development for
* msp430xG43x device.
*
* Texas Instruments, Version 2.5
*
* Rev. 2.0, Fixed some address of the OPAMP registers
* Rev. 2.1, Alignment of defintions in Users Guide and of version numbers
* Rev. 2.2, Fixed some defintions of the OPAMP registers
* Rev. 2.21, Added DAC12OPS
* Rev. 2.22, Removed definition of LCDLOWR (not available at 4xx devices)
* Rev. 2.3, Fixed type in ADC12 bit definitions (replaced ADC10 with ADC12)
* Added DMA request definitions
* Rev. 2.3, Changed definition in OPAMP section to accord Users Guide
* Rev. 2.1, Removed definitions for DMA channel 1 + 2
* Rev. 2.2, Removed unused def of TASSEL2 / TBSSEL2
* Rev. 2.3, Added VLD bits in SVS module
* Rev. 2.4, Removed definitions for BTRESET
* Rev. 2.5, added definitions for Interrupt Vectors xxIV
*
********************************************************************/
#ifndef __msp430xG43x
#define __msp430xG43x
#define __MSP430_HEADER_VERSION__ 1064
#define __MSP430_TI_HEADERS__
#ifdef __cplusplus
extern "C" {
#endif
#include <iomacros.h>
/************************************************************
* STANDARD BITS
************************************************************/
#define BIT0 (0x0001)
#define BIT1 (0x0002)
#define BIT2 (0x0004)
#define BIT3 (0x0008)
#define BIT4 (0x0010)
#define BIT5 (0x0020)
#define BIT6 (0x0040)
#define BIT7 (0x0080)
#define BIT8 (0x0100)
#define BIT9 (0x0200)
#define BITA (0x0400)
#define BITB (0x0800)
#define BITC (0x1000)
#define BITD (0x2000)
#define BITE (0x4000)
#define BITF (0x8000)
/************************************************************
* STATUS REGISTER BITS
************************************************************/
#define C (0x0001)
#define Z (0x0002)
#define N (0x0004)
#define V (0x0100)
#define GIE (0x0008)
#define CPUOFF (0x0010)
#define OSCOFF (0x0020)
#define SCG0 (0x0040)
#define SCG1 (0x0080)
/* Low Power Modes coded with Bits 4-7 in SR */
#ifndef __STDC__ /* Begin #defines for assembler */
#define LPM0 (CPUOFF)
#define LPM1 (SCG0+CPUOFF)
#define LPM2 (SCG1+CPUOFF)
#define LPM3 (SCG1+SCG0+CPUOFF)
#define LPM4 (SCG1+SCG0+OSCOFF+CPUOFF)
/* End #defines for assembler */
#else /* Begin #defines for C */
#define LPM0_bits (CPUOFF)
#define LPM1_bits (SCG0+CPUOFF)
#define LPM2_bits (SCG1+CPUOFF)
#define LPM3_bits (SCG1+SCG0+CPUOFF)
#define LPM4_bits (SCG1+SCG0+OSCOFF+CPUOFF)
#include "in430.h"
#define LPM0 _BIS_SR(LPM0_bits) /* Enter Low Power Mode 0 */
#define LPM0_EXIT _BIC_SR_IRQ(LPM0_bits) /* Exit Low Power Mode 0 */
#define LPM1 _BIS_SR(LPM1_bits) /* Enter Low Power Mode 1 */
#define LPM1_EXIT _BIC_SR_IRQ(LPM1_bits) /* Exit Low Power Mode 1 */
#define LPM2 _BIS_SR(LPM2_bits) /* Enter Low Power Mode 2 */
#define LPM2_EXIT _BIC_SR_IRQ(LPM2_bits) /* Exit Low Power Mode 2 */
#define LPM3 _BIS_SR(LPM3_bits) /* Enter Low Power Mode 3 */
#define LPM3_EXIT _BIC_SR_IRQ(LPM3_bits) /* Exit Low Power Mode 3 */
#define LPM4 _BIS_SR(LPM4_bits) /* Enter Low Power Mode 4 */
#define LPM4_EXIT _BIC_SR_IRQ(LPM4_bits) /* Exit Low Power Mode 4 */
#endif /* End #defines for C */
/************************************************************
* PERIPHERAL FILE MAP
************************************************************/
/************************************************************
* SPECIAL FUNCTION REGISTER ADDRESSES + CONTROL BITS
************************************************************/
#define IE1_ 0x0000 /* Interrupt Enable 1 */
sfrb(IE1, IE1_);
#define U0IE IE1 /* UART0 Interrupt Enable Register */
#define WDTIE (0x01)
#define OFIE (0x02)
#define NMIIE (0x10)
#define ACCVIE (0x20)
#define URXIE0 (0x40)
#define UTXIE0 (0x80)
#define IFG1_ 0x0002 /* Interrupt Flag 1 */
sfrb(IFG1, IFG1_);
#define U0IFG IFG1 /* UART0 Interrupt Flag Register */
#define WDTIFG (0x01)
#define OFIFG (0x02)
#define NMIIFG (0x10)
#define URXIFG0 (0x40)
#define UTXIFG0 (0x80)
#define ME1_ 0x0004 /* Module Enable 1 */
sfrb(ME1, ME1_);
#define U0ME ME1 /* UART0 Module Enable Register */
#define URXE0 (0x40)
#define UTXE0 (0x80)
#define USPIE0 (0x40)
#define IE2_ 0x0001 /* Interrupt Enable 2 */
sfrb(IE2, IE2_);
#define BTIE (0x80)
#define IFG2_ 0x0003 /* Interrupt Flag 2 */
sfrb(IFG2, IFG2_);
#define BTIFG (0x80)
/************************************************************
* WATCHDOG TIMER
************************************************************/
#define __MSP430_HAS_WDT__ /* Definition to show that Module is available */
#define WDTCTL_ 0x0120 /* Watchdog Timer Control */
sfrw(WDTCTL, WDTCTL_);
/* The bit names have been prefixed with "WDT" */
#define WDTIS0 (0x0001)
#define WDTIS1 (0x0002)
#define WDTSSEL (0x0004)
#define WDTCNTCL (0x0008)
#define WDTTMSEL (0x0010)
#define WDTNMI (0x0020)
#define WDTNMIES (0x0040)
#define WDTHOLD (0x0080)
#define WDTPW (0x5A00)
/* WDT-interval times [1ms] coded with Bits 0-2 */
/* WDT is clocked by fSMCLK (assumed 1MHz) */
#define WDT_MDLY_32 (WDTPW+WDTTMSEL+WDTCNTCL) /* 32ms interval (default) */
#define WDT_MDLY_8 (WDTPW+WDTTMSEL+WDTCNTCL+WDTIS0) /* 8ms " */
#define WDT_MDLY_0_5 (WDTPW+WDTTMSEL+WDTCNTCL+WDTIS1) /* 0.5ms " */
#define WDT_MDLY_0_064 (WDTPW+WDTTMSEL+WDTCNTCL+WDTIS1+WDTIS0) /* 0.064ms " */
/* WDT is clocked by fACLK (assumed 32KHz) */
#define WDT_ADLY_1000 (WDTPW+WDTTMSEL+WDTCNTCL+WDTSSEL) /* 1000ms " */
#define WDT_ADLY_250 (WDTPW+WDTTMSEL+WDTCNTCL+WDTSSEL+WDTIS0) /* 250ms " */
#define WDT_ADLY_16 (WDTPW+WDTTMSEL+WDTCNTCL+WDTSSEL+WDTIS1) /* 16ms " */
#define WDT_ADLY_1_9 (WDTPW+WDTTMSEL+WDTCNTCL+WDTSSEL+WDTIS1+WDTIS0) /* 1.9ms " */
/* Watchdog mode -> reset after expired time */
/* WDT is clocked by fSMCLK (assumed 1MHz) */
#define WDT_MRST_32 (WDTPW+WDTCNTCL) /* 32ms interval (default) */
#define WDT_MRST_8 (WDTPW+WDTCNTCL+WDTIS0) /* 8ms " */
#define WDT_MRST_0_5 (WDTPW+WDTCNTCL+WDTIS1) /* 0.5ms " */
#define WDT_MRST_0_064 (WDTPW+WDTCNTCL+WDTIS1+WDTIS0) /* 0.064ms " */
/* WDT is clocked by fACLK (assumed 32KHz) */
#define WDT_ARST_1000 (WDTPW+WDTCNTCL+WDTSSEL) /* 1000ms " */
#define WDT_ARST_250 (WDTPW+WDTCNTCL+WDTSSEL+WDTIS0) /* 250ms " */
#define WDT_ARST_16 (WDTPW+WDTCNTCL+WDTSSEL+WDTIS1) /* 16ms " */
#define WDT_ARST_1_9 (WDTPW+WDTCNTCL+WDTSSEL+WDTIS1+WDTIS0) /* 1.9ms " */
/* INTERRUPT CONTROL */
/* These two bits are defined in the Special Function Registers */
/* #define WDTIE 0x01 */
/* #define WDTIFG 0x01 */
/************************************************************
* DIGITAL I/O Port1/2
************************************************************/
#define __MSP430_HAS_PORT1__ /* Definition to show that Module is available */
#define __MSP430_HAS_PORT2__ /* Definition to show that Module is available */
#define P1IN_ 0x0020 /* Port 1 Input */
const_sfrb(P1IN, P1IN_);
#define P1OUT_ 0x0021 /* Port 1 Output */
sfrb(P1OUT, P1OUT_);
#define P1DIR_ 0x0022 /* Port 1 Direction */
sfrb(P1DIR, P1DIR_);
#define P1IFG_ 0x0023 /* Port 1 Interrupt Flag */
sfrb(P1IFG, P1IFG_);
#define P1IES_ 0x0024 /* Port 1 Interrupt Edge Select */
sfrb(P1IES, P1IES_);
#define P1IE_ 0x0025 /* Port 1 Interrupt Enable */
sfrb(P1IE, P1IE_);
#define P1SEL_ 0x0026 /* Port 1 Selection */
sfrb(P1SEL, P1SEL_);
#define P2IN_ 0x0028 /* Port 2 Input */
const_sfrb(P2IN, P2IN_);
#define P2OUT_ 0x0029 /* Port 2 Output */
sfrb(P2OUT, P2OUT_);
#define P2DIR_ 0x002A /* Port 2 Direction */
sfrb(P2DIR, P2DIR_);
#define P2IFG_ 0x002B /* Port 2 Interrupt Flag */
sfrb(P2IFG, P2IFG_);
#define P2IES_ 0x002C /* Port 2 Interrupt Edge Select */
sfrb(P2IES, P2IES_);
#define P2IE_ 0x002D /* Port 2 Interrupt Enable */
sfrb(P2IE, P2IE_);
#define P2SEL_ 0x002E /* Port 2 Selection */
sfrb(P2SEL, P2SEL_);
/************************************************************
* DIGITAL I/O Port3/4
************************************************************/
#define __MSP430_HAS_PORT3__ /* Definition to show that Module is available */
#define __MSP430_HAS_PORT4__ /* Definition to show that Module is available */
#define P3IN_ 0x0018 /* Port 3 Input */
const_sfrb(P3IN, P3IN_);
#define P3OUT_ 0x0019 /* Port 3 Output */
sfrb(P3OUT, P3OUT_);
#define P3DIR_ 0x001A /* Port 3 Direction */
sfrb(P3DIR, P3DIR_);
#define P3SEL_ 0x001B /* Port 3 Selection */
sfrb(P3SEL, P3SEL_);
#define P4IN_ 0x001C /* Port 4 Input */
const_sfrb(P4IN, P4IN_);
#define P4OUT_ 0x001D /* Port 4 Output */
sfrb(P4OUT, P4OUT_);
#define P4DIR_ 0x001E /* Port 4 Direction */
sfrb(P4DIR, P4DIR_);
#define P4SEL_ 0x001F /* Port 4 Selection */
sfrb(P4SEL, P4SEL_);
/************************************************************
* DIGITAL I/O Port5/6
************************************************************/
#define __MSP430_HAS_PORT5__ /* Definition to show that Module is available */
#define __MSP430_HAS_PORT6__ /* Definition to show that Module is available */
#define P5IN_ 0x0030 /* Port 5 Input */
const_sfrb(P5IN, P5IN_);
#define P5OUT_ 0x0031 /* Port 5 Output */
sfrb(P5OUT, P5OUT_);
#define P5DIR_ 0x0032 /* Port 5 Direction */
sfrb(P5DIR, P5DIR_);
#define P5SEL_ 0x0033 /* Port 5 Selection */
sfrb(P5SEL, P5SEL_);
#define P6IN_ 0x0034 /* Port 6 Input */
const_sfrb(P6IN, P6IN_);
#define P6OUT_ 0x0035 /* Port 6 Output */
sfrb(P6OUT, P6OUT_);
#define P6DIR_ 0x0036 /* Port 6 Direction */
sfrb(P6DIR, P6DIR_);
#define P6SEL_ 0x0037 /* Port 6 Selection */
sfrb(P6SEL, P6SEL_);
/************************************************************
* BASIC TIMER
************************************************************/
#define __MSP430_HAS_BT__ /* Definition to show that Module is available */
#define BTCTL_ 0x0040 /* Basic Timer Control */
sfrb(BTCTL, BTCTL_);
/* The bit names have been prefixed with "BT" */
#define BTIP0 (0x01)
#define BTIP1 (0x02)
#define BTIP2 (0x04)
#define BTFRFQ0 (0x08)
#define BTFRFQ1 (0x10)
#define BTDIV (0x20) /* fCLK2 = ACLK:256 */
#define BTHOLD (0x40) /* BT1 is held if this bit is set */
#define BTSSEL (0x80) /* fBT = fMCLK (main clock) */
#define BTCNT1_ 0x0046 /* Basic Timer Count 1 */
sfrb(BTCNT1, BTCNT1_);
#define BTCNT2_ 0x0047 /* Basic Timer Count 2 */
sfrb(BTCNT2, BTCNT2_);
/* Frequency of the BTCNT2 coded with Bit 5 and 7 in BTCTL */
#define BT_fCLK2_ACLK (0x00)
#define BT_fCLK2_ACLK_DIV256 (BTDIV)
#define BT_fCLK2_MCLK (BTSSEL)
/* Interrupt interval time fINT coded with Bits 0-2 in BTCTL */
#define BT_fCLK2_DIV2 (0x00) /* fINT = fCLK2:2 (default) */
#define BT_fCLK2_DIV4 (BTIP0) /* fINT = fCLK2:4 */
#define BT_fCLK2_DIV8 (BTIP1) /* fINT = fCLK2:8 */
#define BT_fCLK2_DIV16 (BTIP1+BTIP0) /* fINT = fCLK2:16 */
#define BT_fCLK2_DIV32 (BTIP2) /* fINT = fCLK2:32 */
#define BT_fCLK2_DIV64 (BTIP2+BTIP0) /* fINT = fCLK2:64 */
#define BT_fCLK2_DIV128 (BTIP2+BTIP1) /* fINT = fCLK2:128 */
#define BT_fCLK2_DIV256 (BTIP2+BTIP1+BTIP0) /* fINT = fCLK2:256 */
/* Frequency of LCD coded with Bits 3-4 */
#define BT_fLCD_DIV32 (0x00) /* fLCD = fACLK:32 (default) */
#define BT_fLCD_DIV64 (BTFRFQ0) /* fLCD = fACLK:64 */
#define BT_fLCD_DIV128 (BTFRFQ1) /* fLCD = fACLK:128 */
#define BT_fLCD_DIV256 (BTFRFQ1+BTFRFQ0) /* fLCD = fACLK:256 */
/* LCD frequency values with fBT=fACLK */
#define BT_fLCD_1K (0x00) /* fACLK:32 (default) */
#define BT_fLCD_512 (BTFRFQ0) /* fACLK:64 */
#define BT_fLCD_256 (BTFRFQ1) /* fACLK:128 */
#define BT_fLCD_128 (BTFRFQ1+BTFRFQ0) /* fACLK:256 */
/* LCD frequency values with fBT=fMCLK */
#define BT_fLCD_31K (BTSSEL) /* fMCLK:32 */
#define BT_fLCD_15_5K (BTSSEL+BTFRFQ0) /* fMCLK:64 */
#define BT_fLCD_7_8K (BTSSEL+BTFRFQ1+BTFRFQ0) /* fMCLK:256 */
/* with assumed vlues of fACLK=32KHz, fMCLK=1MHz */
/* fBT=fACLK is thought for longer interval times */
#define BT_ADLY_0_064 (0x00) /* 0.064ms interval (default) */
#define BT_ADLY_0_125 (BTIP0) /* 0.125ms " */
#define BT_ADLY_0_25 (BTIP1) /* 0.25ms " */
#define BT_ADLY_0_5 (BTIP1+BTIP0) /* 0.5ms " */
#define BT_ADLY_1 (BTIP2) /* 1ms " */
#define BT_ADLY_2 (BTIP2+BTIP0) /* 2ms " */
#define BT_ADLY_4 (BTIP2+BTIP1) /* 4ms " */
#define BT_ADLY_8 (BTIP2+BTIP1+BTIP0) /* 8ms " */
#define BT_ADLY_16 (BTDIV) /* 16ms " */
#define BT_ADLY_32 (BTDIV+BTIP0) /* 32ms " */
#define BT_ADLY_64 (BTDIV+BTIP1) /* 64ms " */
#define BT_ADLY_125 (BTDIV+BTIP1+BTIP0) /* 125ms " */
#define BT_ADLY_250 (BTDIV+BTIP2) /* 250ms " */
#define BT_ADLY_500 (BTDIV+BTIP2+BTIP0) /* 500ms " */
#define BT_ADLY_1000 (BTDIV+BTIP2+BTIP1) /* 1000ms " */
#define BT_ADLY_2000 (BTDIV+BTIP2+BTIP1+BTIP0) /* 2000ms " */
/* fCLK2=fMCLK (1MHz) is thought for short interval times */
/* the timing for short intervals is more precise than ACLK */
/* NOTE */
/* Be sure that the SCFQCTL-Register is set to 01Fh so that fMCLK=1MHz */
/* Too low interval time results in interrupts too frequent for the processor to handle! */
#define BT_MDLY_0_002 (BTSSEL) /* 0.002ms interval *** interval times */
#define BT_MDLY_0_004 (BTSSEL+BTIP0) /* 0.004ms " *** too short for */
#define BT_MDLY_0_008 (BTSSEL+BTIP1) /* 0.008ms " *** interrupt */
#define BT_MDLY_0_016 (BTSSEL+BTIP1+BTIP0) /* 0.016ms " *** handling */
#define BT_MDLY_0_032 (BTSSEL+BTIP2) /* 0.032ms " */
#define BT_MDLY_0_064 (BTSSEL+BTIP2+BTIP0) /* 0.064ms " */
#define BT_MDLY_0_125 (BTSSEL+BTIP2+BTIP1) /* 0.125ms " */
#define BT_MDLY_0_25 (BTSSEL+BTIP2+BTIP1+BTIP0)/* 0.25ms " */
/* Reset/Hold coded with Bits 6-7 in BT(1)CTL */
/* this is for BT */
//#define BTRESET_CNT1 (BTRESET) /* BTCNT1 is reset while BTRESET is set */
//#define BTRESET_CNT1_2 (BTRESET+BTDIV) /* BTCNT1 .AND. BTCNT2 are reset while ~ is set */
/* this is for BT1 */
#define BTHOLD_CNT1 (BTHOLD) /* BTCNT1 is held while BTHOLD is set */
#define BTHOLD_CNT1_2 (BTHOLD+BTDIV) /* BT1CNT1 .AND. BT1CNT2 are held while ~ is set */
/* INTERRUPT CONTROL BITS */
/* #define BTIE 0x80 */
/* #define BTIFG 0x80 */
/************************************************************
* SYSTEM CLOCK, FLL+
************************************************************/
#define __MSP430_HAS_FLLPLUS__ /* Definition to show that Module is available */
#define SCFI0_ 0x0050 /* System Clock Frequency Integrator 0 */
sfrb(SCFI0, SCFI0_);
#define FN_2 (0x04) /* fDCOCLK = 1.4-12MHz*/
#define FN_3 (0x08) /* fDCOCLK = 2.2-17Mhz*/
#define FN_4 (0x10) /* fDCOCLK = 3.2-25Mhz*/
#define FN_8 (0x20) /* fDCOCLK = 5-40Mhz*/
#define FLLD0 (0x40) /* Loop Divider Bit : 0 */
#define FLLD1 (0x80) /* Loop Divider Bit : 1 */
#define FLLD_1 (0x00) /* Multiply Selected Loop Freq. By 1 */
#define FLLD_2 (0x40) /* Multiply Selected Loop Freq. By 2 */
#define FLLD_4 (0x80) /* Multiply Selected Loop Freq. By 4 */
#define FLLD_8 (0xC0) /* Multiply Selected Loop Freq. By 8 */
#define SCFI1_ 0x0051 /* System Clock Frequency Integrator 1 */
sfrb(SCFI1, SCFI1_);
#define SCFQCTL_ 0x0052 /* System Clock Frequency Control */
sfrb(SCFQCTL, SCFQCTL_);
/* System clock frequency values fMCLK coded with Bits 0-6 in SCFQCTL */
/* #define SCFQ_32K 0x00 fMCLK=1*fACLK only a range from */
#define SCFQ_64K (0x01) /* fMCLK=2*fACLK 1+1 to 127+1 is possible */
#define SCFQ_128K (0x03) /* fMCLK=4*fACLK */
#define SCFQ_256K (0x07) /* fMCLK=8*fACLK */
#define SCFQ_512K (0x0F) /* fMCLK=16*fACLK */
#define SCFQ_1M (0x1F) /* fMCLK=32*fACLK */
#define SCFQ_2M (0x3F) /* fMCLK=64*fACLK */
#define SCFQ_4M (0x7F) /* fMCLK=128*fACLK */
#define SCFQ_M (0x80) /* Modulation Disable */
#define FLL_CTL0_ 0x0053 /* FLL+ Control 0 */
sfrb(FLL_CTL0, FLL_CTL0_);
#define DCOF (0x01) /* DCO Fault Flag */
#define LFOF (0x02) /* Low Frequency Oscillator Fault Flag */
#define XT1OF (0x04) /* High Frequency Oscillator 1 Fault Flag */
#define XT2OF (0x08) /* High Frequency Oscillator 2 Fault Flag */
#define OSCCAP0 (0x10) /* XIN/XOUT Cap 0 */
#define OSCCAP1 (0x20) /* XIN/XOUT Cap 1 */
#define XTS_FLL (0x40) /* 1: Selects high-freq. oscillator */
#define DCOPLUS (0x80) /* DCO+ Enable */
#define XCAP0PF (0x00) /* XIN Cap = XOUT Cap = 0pf */
#define XCAP10PF (0x10) /* XIN Cap = XOUT Cap = 10pf */
#define XCAP14PF (0x20) /* XIN Cap = XOUT Cap = 14pf */
#define XCAP18PF (0x30) /* XIN Cap = XOUT Cap = 18pf */
#define OSCCAP_0 (0x00) /* XIN Cap = XOUT Cap = 0pf */
#define OSCCAP_1 (0x10) /* XIN Cap = XOUT Cap = 10pf */
#define OSCCAP_2 (0x20) /* XIN Cap = XOUT Cap = 14pf */
#define OSCCAP_3 (0x30) /* XIN Cap = XOUT Cap = 18pf */
#define FLL_CTL1_ 0x0054 /* FLL+ Control 1 */
sfrb(FLL_CTL1, FLL_CTL1_);
#define FLL_DIV0 (0x01) /* FLL+ Divide Px.x/ACLK 0 */
#define FLL_DIV1 (0x02) /* FLL+ Divide Px.x/ACLK 1 */
#define SELS (0x04) /* Peripheral Module Clock Source (0: DCO, 1: XT2) */
#define SELM0 (0x08) /* MCLK Source Select 0 */
#define SELM1 (0x10) /* MCLK Source Select 1 */
#define XT2OFF (0x20) /* High Frequency Oscillator 2 (XT2) disable */
#define SMCLKOFF (0x40) /* Peripheral Module Clock (SMCLK) disable */
#define FLL_DIV_1 (0x00) /* FLL+ Divide Px.x/ACLK By 1 */
#define FLL_DIV_2 (0x01) /* FLL+ Divide Px.x/ACLK By 2 */
#define FLL_DIV_4 (0x02) /* FLL+ Divide Px.x/ACLK By 4 */
#define FLL_DIV_8 (0x03) /* FLL+ Divide Px.x/ACLK By 8 */
#define SELM_DCO (0x00) /* Select DCO for CPU MCLK */
#define SELM_XT2 (0x10) /* Select XT2 for CPU MCLK */
#define SELM_A (0x18) /* Select A (from LFXT1) for CPU MCLK */
/* INTERRUPT CONTROL BITS */
/* These two bits are defined in the Special Function Registers */
/* #define OFIFG 0x02 */
/* #define OFIE 0x02 */
/************************************************************
* Brown-Out, Supply Voltage Supervision (SVS)
************************************************************/
#define __MSP430_HAS_SVS__ /* Definition to show that Module is available */
#define SVSCTL_ 0x0056 /* SVS Control */
sfrb(SVSCTL, SVSCTL_);
#define SVSFG (0x01) /* SVS Flag */
#define SVSOP (0x02) /* SVS output (read only) */
#define SVSON (0x04) /* Switches the SVS on/off */
#define PORON (0x08) /* Enable POR Generation if Low Voltage */
#define VLD0 (0x10)
#define VLD1 (0x20)
#define VLD2 (0x40)
#define VLD3 (0x80)
#define VLDON (0x10)
#define VLDOFF (0x00)
#define VLD_1_8V (0x10)
/************************************************************
* LCD
************************************************************/
#define __MSP430_HAS_LCD4__ /* Definition to show that Module is available */
#define LCDCTL_ 0x0090 /* LCD Control */
sfrb(LCDCTL, LCDCTL_);
/* the names of the mode bits are different from the spec */
#define LCDON (0x01)
//#define LCDLOWR (0x02)
#define LCDSON (0x04)
#define LCDMX0 (0x08)
#define LCDMX1 (0x10)
#define LCDP0 (0x20)
#define LCDP1 (0x40)
#define LCDP2 (0x80)
/* Display modes coded with Bits 2-4 */
#define LCDSTATIC (LCDSON)
#define LCD2MUX (LCDMX0+LCDSON)
#define LCD3MUX (LCDMX1+LCDSON)
#define LCD4MUX (LCDMX1+LCDMX0+LCDSON)
/* Group select code with Bits 5-7 Seg.lines Dig.output */
#define LCDSG0 (0x00) /* --------- Port Only (default) */
#define LCDSG0_1 (LCDP0) /* S0 - S15 see Datasheet */
#define LCDSG0_2 (LCDP1) /* S0 - S19 see Datasheet */
#define LCDSG0_3 (LCDP1+LCDP0) /* S0 - S23 see Datasheet */
#define LCDSG0_4 (LCDP2) /* S0 - S27 see Datasheet */
#define LCDSG0_5 (LCDP2+LCDP0) /* S0 - S31 see Datasheet */
#define LCDSG0_6 (LCDP2+LCDP1) /* S0 - S35 see Datasheet */
#define LCDSG0_7 (LCDP2+LCDP1+LCDP0) /* S0 - S39 see Datasheet */
/* NOTE: YOU CAN ONLY USE THE 'S' OR 'G' DECLARATIONS FOR A COMMAND */
/* MOV #LCDSG0_3+LCDOG2_7,&LCDCTL ACTUALY MEANS MOV #LCDP1,&LCDCTL! */
#define LCDOG1_7 (0x00) /* --------- Port Only (default) */
#define LCDOG2_7 (LCDP0) /* S0 - S15 see Datasheet */
#define LCDOG3_7 (LCDP1) /* S0 - S19 see Datasheet */
#define LCDOG4_7 (LCDP1+LCDP0) /* S0 - S23 see Datasheet */
#define LCDOG5_7 (LCDP2) /* S0 - S27 see Datasheet */
#define LCDOG6_7 (LCDP2+LCDP0) /* S0 - S31 see Datasheet */
#define LCDOG7 (LCDP2+LCDP1) /* S0 - S35 see Datasheet */
#define LCDOGOFF (LCDP2+LCDP1+LCDP0) /* S0 - S39 see Datasheet */
#define LCDMEM_ (0x0091) /* LCD Memory */
#ifndef __STDC__
#define LCDMEM (LCDMEM_) /* LCD Memory (for assembler) */
#else
#define LCDMEM ((volatile char*) LCDMEM_) /* LCD Memory (for C) */
#endif
#define LCDM1_ 0x0091 /* LCD Memory 1 */
sfrb(LCDM1, LCDM1_);
#define LCDM2_ 0x0092 /* LCD Memory 2 */
sfrb(LCDM2, LCDM2_);
#define LCDM3_ 0x0093 /* LCD Memory 3 */
sfrb(LCDM3, LCDM3_);
#define LCDM4_ 0x0094 /* LCD Memory 4 */
sfrb(LCDM4, LCDM4_);
#define LCDM5_ 0x0095 /* LCD Memory 5 */
sfrb(LCDM5, LCDM5_);
#define LCDM6_ 0x0096 /* LCD Memory 6 */
sfrb(LCDM6, LCDM6_);
#define LCDM7_ 0x0097 /* LCD Memory 7 */
sfrb(LCDM7, LCDM7_);
#define LCDM8_ 0x0098 /* LCD Memory 8 */
sfrb(LCDM8, LCDM8_);
#define LCDM9_ 0x0099 /* LCD Memory 9 */
sfrb(LCDM9, LCDM9_);
#define LCDM10_ 0x009A /* LCD Memory 10 */
sfrb(LCDM10, LCDM10_);
#define LCDM11_ 0x009B /* LCD Memory 11 */
sfrb(LCDM11, LCDM11_);
#define LCDM12_ 0x009C /* LCD Memory 12 */
sfrb(LCDM12, LCDM12_);
#define LCDM13_ 0x009D /* LCD Memory 13 */
sfrb(LCDM13, LCDM13_);
#define LCDM14_ 0x009E /* LCD Memory 14 */
sfrb(LCDM14, LCDM14_);
#define LCDM15_ 0x009F /* LCD Memory 15 */
sfrb(LCDM15, LCDM15_);
#define LCDM16_ 0x00A0 /* LCD Memory 16 */
sfrb(LCDM16, LCDM16_);
#define LCDM17_ 0x00A1 /* LCD Memory 17 */
sfrb(LCDM17, LCDM17_);
#define LCDM18_ 0x00A2 /* LCD Memory 18 */
sfrb(LCDM18, LCDM18_);
#define LCDM19_ 0x00A3 /* LCD Memory 19 */
sfrb(LCDM19, LCDM19_);
#define LCDM20_ 0x00A4 /* LCD Memory 20 */
sfrb(LCDM20, LCDM20_);
#define LCDMA (LCDM10) /* LCD Memory A */
#define LCDMB (LCDM11) /* LCD Memory B */
#define LCDMC (LCDM12) /* LCD Memory C */
#define LCDMD (LCDM13) /* LCD Memory D */
#define LCDME (LCDM14) /* LCD Memory E */
#define LCDMF (LCDM15) /* LCD Memory F */
/************************************************************
* USART
************************************************************/
/* UxCTL */
#define PENA (0x80) /* Parity enable */
#define PEV (0x40) /* Parity 0:odd / 1:even */
#define SPB (0x20) /* Stop Bits 0:one / 1: two */
#define CHAR (0x10) /* Data 0:7-bits / 1:8-bits */
#define LISTEN (0x08) /* Listen mode */
#define SYNC (0x04) /* UART / SPI mode */
#define MM (0x02) /* Master Mode off/on */
#define SWRST (0x01) /* USART Software Reset */
/* UxTCTL */
#define CKPH (0x80) /* SPI: Clock Phase */
#define CKPL (0x40) /* Clock Polarity */
#define SSEL1 (0x20) /* Clock Source Select 1 */
#define SSEL0 (0x10) /* Clock Source Select 0 */
#define URXSE (0x08) /* Receive Start edge select */
#define TXWAKE (0x04) /* TX Wake up mode */
#define STC (0x02) /* SPI: STC enable 0:on / 1:off */
#define TXEPT (0x01) /* TX Buffer empty */
/* UxRCTL */
#define FE (0x80) /* Frame Error */
#define PE (0x40) /* Parity Error */
#define OE (0x20) /* Overrun Error */
#define BRK (0x10) /* Break detected */
#define URXEIE (0x08) /* RX Error interrupt enable */
#define URXWIE (0x04) /* RX Wake up interrupt enable */
#define RXWAKE (0x02) /* RX Wake up detect */
#define RXERR (0x01) /* RX Error Error */
/************************************************************
* USART 0
************************************************************/
#define __MSP430_HAS_UART0__ /* Definition to show that Module is available */
#define U0CTL_ 0x0070 /* USART 0 Control */
sfrb(U0CTL, U0CTL_);
#define U0TCTL_ 0x0071 /* USART 0 Transmit Control */
sfrb(U0TCTL, U0TCTL_);
#define U0RCTL_ 0x0072 /* USART 0 Receive Control */
sfrb(U0RCTL, U0RCTL_);
#define U0MCTL_ 0x0073 /* USART 0 Modulation Control */
sfrb(U0MCTL, U0MCTL_);
#define U0BR0_ 0x0074 /* USART 0 Baud Rate 0 */
sfrb(U0BR0, U0BR0_);
#define U0BR1_ 0x0075 /* USART 0 Baud Rate 1 */
sfrb(U0BR1, U0BR1_);
#define U0RXBUF_ 0x0076 /* USART 0 Receive Buffer */
const_sfrb(U0RXBUF, U0RXBUF_);
#define U0TXBUF_ 0x0077 /* USART 0 Transmit Buffer */
sfrb(U0TXBUF, U0TXBUF_);
/* Alternate register names */
#define UCTL0 U0CTL /* USART 0 Control */
#define UTCTL0 U0TCTL /* USART 0 Transmit Control */
#define URCTL0 U0RCTL /* USART 0 Receive Control */
#define UMCTL0 U0MCTL /* USART 0 Modulation Control */
#define UBR00 U0BR0 /* USART 0 Baud Rate 0 */
#define UBR10 U0BR1 /* USART 0 Baud Rate 1 */
#define RXBUF0 U0RXBUF /* USART 0 Receive Buffer */
#define TXBUF0 U0TXBUF /* USART 0 Transmit Buffer */
#define UCTL0_ U0CTL_ /* USART 0 Control */
#define UTCTL0_ U0TCTL_ /* USART 0 Transmit Control */
#define URCTL0_ U0RCTL_ /* USART 0 Receive Control */
#define UMCTL0_ U0MCTL_ /* USART 0 Modulation Control */
#define UBR00_ U0BR0_ /* USART 0 Baud Rate 0 */
#define UBR10_ U0BR1_ /* USART 0 Baud Rate 1 */
#define RXBUF0_ U0RXBUF_ /* USART 0 Receive Buffer */
#define TXBUF0_ U0TXBUF_ /* USART 0 Transmit Buffer */
#define UCTL_0 U0CTL /* USART 0 Control */
#define UTCTL_0 U0TCTL /* USART 0 Transmit Control */
#define URCTL_0 U0RCTL /* USART 0 Receive Control */
#define UMCTL_0 U0MCTL /* USART 0 Modulation Control */
#define UBR0_0 U0BR0 /* USART 0 Baud Rate 0 */
#define UBR1_0 U0BR1 /* USART 0 Baud Rate 1 */
#define RXBUF_0 U0RXBUF /* USART 0 Receive Buffer */
#define TXBUF_0 U0TXBUF /* USART 0 Transmit Buffer */
#define UCTL_0_ U0CTL_ /* USART 0 Control */
#define UTCTL_0_ U0TCTL_ /* USART 0 Transmit Control */
#define URCTL_0_ U0RCTL_ /* USART 0 Receive Control */
#define UMCTL_0_ U0MCTL_ /* USART 0 Modulation Control */
#define UBR0_0_ U0BR0_ /* USART 0 Baud Rate 0 */
#define UBR1_0_ U0BR1_ /* USART 0 Baud Rate 1 */
#define RXBUF_0_ U0RXBUF_ /* USART 0 Receive Buffer */
#define TXBUF_0_ U0TXBUF_ /* USART 0 Transmit Buffer */
/************************************************************
* Timer A3
************************************************************/
#define __MSP430_HAS_TA3__ /* Definition to show that Module is available */
#define TAIV_ 0x012E /* Timer A Interrupt Vector Word */
const_sfrw(TAIV, TAIV_);
#define TACTL_ 0x0160 /* Timer A Control */
sfrw(TACTL, TACTL_);
#define TACCTL0_ 0x0162 /* Timer A Capture/Compare Control 0 */
sfrw(TACCTL0, TACCTL0_);
#define TACCTL1_ 0x0164 /* Timer A Capture/Compare Control 1 */
sfrw(TACCTL1, TACCTL1_);
#define TACCTL2_ 0x0166 /* Timer A Capture/Compare Control 2 */
sfrw(TACCTL2, TACCTL2_);
#define TAR_ 0x0170 /* Timer A Counter Register */
sfrw(TAR, TAR_);
#define TACCR0_ 0x0172 /* Timer A Capture/Compare 0 */
sfrw(TACCR0, TACCR0_);
#define TACCR1_ 0x0174 /* Timer A Capture/Compare 1 */
sfrw(TACCR1, TACCR1_);
#define TACCR2_ 0x0176 /* Timer A Capture/Compare 2 */
sfrw(TACCR2, TACCR2_);
/* Alternate register names */
#define CCTL0 TACCTL0 /* Timer A Capture/Compare Control 0 */
#define CCTL1 TACCTL1 /* Timer A Capture/Compare Control 1 */
#define CCTL2 TACCTL2 /* Timer A Capture/Compare Control 2 */
#define CCR0 TACCR0 /* Timer A Capture/Compare 0 */
#define CCR1 TACCR1 /* Timer A Capture/Compare 1 */
#define CCR2 TACCR2 /* Timer A Capture/Compare 2 */
#define CCTL0_ TACCTL0_ /* Timer A Capture/Compare Control 0 */
#define CCTL1_ TACCTL1_ /* Timer A Capture/Compare Control 1 */
#define CCTL2_ TACCTL2_ /* Timer A Capture/Compare Control 2 */
#define CCR0_ TACCR0_ /* Timer A Capture/Compare 0 */
#define CCR1_ TACCR1_ /* Timer A Capture/Compare 1 */
#define CCR2_ TACCR2_ /* Timer A Capture/Compare 2 */
/* Alternate register names - 5xx style */
#define TA0IV TAIV /* Timer A Interrupt Vector Word */
#define TA0CTL TACTL /* Timer A Control */
#define TA0CCTL0 TACCTL0 /* Timer A Capture/Compare Control 0 */
#define TA0CCTL1 TACCTL1 /* Timer A Capture/Compare Control 1 */
#define TA0CCTL2 TACCTL2 /* Timer A Capture/Compare Control 2 */
#define TA0R TAR /* Timer A Counter Register */
#define TA0CCR0 TACCR0 /* Timer A Capture/Compare 0 */
#define TA0CCR1 TACCR1 /* Timer A Capture/Compare 1 */
#define TA0CCR2 TACCR2 /* Timer A Capture/Compare 2 */
#define TA0IV_ TAIV_ /* Timer A Interrupt Vector Word */
#define TA0CTL_ TACTL_ /* Timer A Control */
#define TA0CCTL0_ TACCTL0_ /* Timer A Capture/Compare Control 0 */
#define TA0CCTL1_ TACCTL1_ /* Timer A Capture/Compare Control 1 */
#define TA0CCTL2_ TACCTL2_ /* Timer A Capture/Compare Control 2 */
#define TA0R_ TAR_ /* Timer A Counter Register */
#define TA0CCR0_ TACCR0_ /* Timer A Capture/Compare 0 */
#define TA0CCR1_ TACCR1_ /* Timer A Capture/Compare 1 */
#define TA0CCR2_ TACCR2_ /* Timer A Capture/Compare 2 */
#define TIMER0_A1_VECTOR TIMERA1_VECTOR /* Int. Vector: Timer A CC1-2, TA */
#define TIMER0_A0_VECTOR TIMERA0_VECTOR /* Int. Vector: Timer A CC0 */
#define TASSEL1 (0x0200) /* Timer A clock source select 1 */
#define TASSEL0 (0x0100) /* Timer A clock source select 0 */
#define ID1 (0x0080) /* Timer A clock input divider 1 */
#define ID0 (0x0040) /* Timer A clock input divider 0 */
#define MC1 (0x0020) /* Timer A mode control 1 */
#define MC0 (0x0010) /* Timer A mode control 0 */
#define TACLR (0x0004) /* Timer A counter clear */
#define TAIE (0x0002) /* Timer A counter interrupt enable */
#define TAIFG (0x0001) /* Timer A counter interrupt flag */
#define MC_0 (0x0000) /* Timer A mode control: 0 - Stop */
#define MC_1 (0x0010) /* Timer A mode control: 1 - Up to CCR0 */
#define MC_2 (0x0020) /* Timer A mode control: 2 - Continous up */
#define MC_3 (0x0030) /* Timer A mode control: 3 - Up/Down */
#define ID_0 (0x0000) /* Timer A input divider: 0 - /1 */
#define ID_1 (0x0040) /* Timer A input divider: 1 - /2 */
#define ID_2 (0x0080) /* Timer A input divider: 2 - /4 */
#define ID_3 (0x00C0) /* Timer A input divider: 3 - /8 */
#define TASSEL_0 (0x0000) /* Timer A clock source select: 0 - TACLK */
#define TASSEL_1 (0x0100) /* Timer A clock source select: 1 - ACLK */
#define TASSEL_2 (0x0200) /* Timer A clock source select: 2 - SMCLK */
#define TASSEL_3 (0x0300) /* Timer A clock source select: 3 - INCLK */
#define CM1 (0x8000) /* Capture mode 1 */
#define CM0 (0x4000) /* Capture mode 0 */
#define CCIS1 (0x2000) /* Capture input select 1 */
#define CCIS0 (0x1000) /* Capture input select 0 */
#define SCS (0x0800) /* Capture sychronize */
#define SCCI (0x0400) /* Latched capture signal (read) */
#define CAP (0x0100) /* Capture mode: 1 /Compare mode : 0 */
#define OUTMOD2 (0x0080) /* Output mode 2 */
#define OUTMOD1 (0x0040) /* Output mode 1 */
#define OUTMOD0 (0x0020) /* Output mode 0 */
#define CCIE (0x0010) /* Capture/compare interrupt enable */
#define CCI (0x0008) /* Capture input signal (read) */
#define OUT (0x0004) /* PWM Output signal if output mode 0 */
#define COV (0x0002) /* Capture/compare overflow flag */
#define CCIFG (0x0001) /* Capture/compare interrupt flag */
#define OUTMOD_0 (0x0000) /* PWM output mode: 0 - output only */
#define OUTMOD_1 (0x0020) /* PWM output mode: 1 - set */
#define OUTMOD_2 (0x0040) /* PWM output mode: 2 - PWM toggle/reset */
#define OUTMOD_3 (0x0060) /* PWM output mode: 3 - PWM set/reset */
#define OUTMOD_4 (0x0080) /* PWM output mode: 4 - toggle */
#define OUTMOD_5 (0x00A0) /* PWM output mode: 5 - Reset */
#define OUTMOD_6 (0x00C0) /* PWM output mode: 6 - PWM toggle/set */
#define OUTMOD_7 (0x00E0) /* PWM output mode: 7 - PWM reset/set */
#define CCIS_0 (0x0000) /* Capture input select: 0 - CCIxA */
#define CCIS_1 (0x1000) /* Capture input select: 1 - CCIxB */
#define CCIS_2 (0x2000) /* Capture input select: 2 - GND */
#define CCIS_3 (0x3000) /* Capture input select: 3 - Vcc */
#define CM_0 (0x0000) /* Capture mode: 0 - disabled */
#define CM_1 (0x4000) /* Capture mode: 1 - pos. edge */
#define CM_2 (0x8000) /* Capture mode: 1 - neg. edge */
#define CM_3 (0xC000) /* Capture mode: 1 - both edges */
/* TA3IV Definitions */
#define TAIV_NONE (0x0000) /* No Interrupt pending */
#define TAIV_TACCR1 (0x0002) /* TACCR1_CCIFG */
#define TAIV_TACCR2 (0x0004) /* TACCR2_CCIFG */
#define TAIV_6 (0x0006) /* Reserved */
#define TAIV_8 (0x0008) /* Reserved */
#define TAIV_TAIFG (0x000A) /* TAIFG */
/************************************************************
* Timer B3
************************************************************/
#define __MSP430_HAS_TB3__ /* Definition to show that Module is available */
#define TBIV_ 0x011E /* Timer B Interrupt Vector Word */
const_sfrw(TBIV, TBIV_);
#define TBCTL_ 0x0180 /* Timer B Control */
sfrw(TBCTL, TBCTL_);
#define TBCCTL0_ 0x0182 /* Timer B Capture/Compare Control 0 */
sfrw(TBCCTL0, TBCCTL0_);
#define TBCCTL1_ 0x0184 /* Timer B Capture/Compare Control 1 */
sfrw(TBCCTL1, TBCCTL1_);
#define TBCCTL2_ 0x0186 /* Timer B Capture/Compare Control 2 */
sfrw(TBCCTL2, TBCCTL2_);
#define TBR_ 0x0190 /* Timer B Counter Register */
sfrw(TBR, TBR_);
#define TBCCR0_ 0x0192 /* Timer B Capture/Compare 0 */
sfrw(TBCCR0, TBCCR0_);
#define TBCCR1_ 0x0194 /* Timer B Capture/Compare 1 */
sfrw(TBCCR1, TBCCR1_);
#define TBCCR2_ 0x0196 /* Timer B Capture/Compare 2 */
sfrw(TBCCR2, TBCCR2_);
/* Alternate register names - 5xx style */
#define TB0IV TBIV /* Timer B Interrupt Vector Word */
#define TB0CTL TBCTL /* Timer B Control */
#define TB0CCTL0 TBCCTL0 /* Timer B Capture/Compare Control 0 */
#define TB0CCTL1 TBCCTL1 /* Timer B Capture/Compare Control 1 */
#define TB0CCTL2 TBCCTL2 /* Timer B Capture/Compare Control 2 */
#define TB0R TBR /* Timer B Counter Register */
#define TB0CCR0 TBCCR0 /* Timer B Capture/Compare 0 */
#define TB0CCR1 TBCCR1 /* Timer B Capture/Compare 1 */
#define TB0CCR2 TBCCR2 /* Timer B Capture/Compare 2 */
#define TB0IV_ TBIV_ /* Timer B Interrupt Vector Word */
#define TB0CTL_ TBCTL_ /* Timer B Control */
#define TB0CCTL0_ TBCCTL0_ /* Timer B Capture/Compare Control 0 */
#define TB0CCTL1_ TBCCTL1_ /* Timer B Capture/Compare Control 1 */
#define TB0CCTL2_ TBCCTL2_ /* Timer B Capture/Compare Control 2 */
#define TB0R_ TBR_ /* Timer B Counter Register */
#define TB0CCR0_ TBCCR0_ /* Timer B Capture/Compare 0 */
#define TB0CCR1_ TBCCR1_ /* Timer B Capture/Compare 1 */
#define TB0CCR2_ TBCCR2_ /* Timer B Capture/Compare 2 */
#define TBCLGRP1 (0x4000) /* Timer B Compare latch load group 1 */
#define TBCLGRP0 (0x2000) /* Timer B Compare latch load group 0 */
#define CNTL1 (0x1000) /* Counter lenght 1 */
#define CNTL0 (0x0800) /* Counter lenght 0 */
#define TBSSEL1 (0x0200) /* Clock source 1 */
#define TBSSEL0 (0x0100) /* Clock source 0 */
#define TBCLR (0x0004) /* Timer B counter clear */
#define TBIE (0x0002) /* Timer B interrupt enable */
#define TBIFG (0x0001) /* Timer B interrupt flag */
#define SHR1 (0x4000) /* Timer B Compare latch load group 1 */
#define SHR0 (0x2000) /* Timer B Compare latch load group 0 */
#define TBSSEL_0 (0x0000) /* Clock Source: TBCLK */
#define TBSSEL_1 (0x0100) /* Clock Source: ACLK */
#define TBSSEL_2 (0x0200) /* Clock Source: SMCLK */
#define TBSSEL_3 (0x0300) /* Clock Source: INCLK */
#define CNTL_0 (0x0000) /* Counter lenght: 16 bit */
#define CNTL_1 (0x0800) /* Counter lenght: 12 bit */
#define CNTL_2 (0x1000) /* Counter lenght: 10 bit */
#define CNTL_3 (0x1800) /* Counter lenght: 8 bit */
#define SHR_0 (0x0000) /* Timer B Group: 0 - individually */
#define SHR_1 (0x2000) /* Timer B Group: 1 - 3 groups (1-2, 3-4, 5-6) */
#define SHR_2 (0x4000) /* Timer B Group: 2 - 2 groups (1-3, 4-6)*/
#define SHR_3 (0x6000) /* Timer B Group: 3 - 1 group (all) */
#define TBCLGRP_0 (0x0000) /* Timer B Group: 0 - individually */
#define TBCLGRP_1 (0x2000) /* Timer B Group: 1 - 3 groups (1-2, 3-4, 5-6) */
#define TBCLGRP_2 (0x4000) /* Timer B Group: 2 - 2 groups (1-3, 4-6)*/
#define TBCLGRP_3 (0x6000) /* Timer B Group: 3 - 1 group (all) */
/* Additional Timer B Control Register bits are defined in Timer A */
#define CLLD1 (0x0400) /* Compare latch load source 1 */
#define CLLD0 (0x0200) /* Compare latch load source 0 */
#define SLSHR1 (0x0400) /* Compare latch load source 1 */
#define SLSHR0 (0x0200) /* Compare latch load source 0 */
#define SLSHR_0 (0x0000) /* Compare latch load sourec : 0 - immediate */
#define SLSHR_1 (0x0200) /* Compare latch load sourec : 1 - TBR counts to 0 */
#define SLSHR_2 (0x0400) /* Compare latch load sourec : 2 - up/down */
#define SLSHR_3 (0x0600) /* Compare latch load sourec : 3 - TBR counts to TBCTL0 */
#define CLLD_0 (0x0000) /* Compare latch load sourec : 0 - immediate */
#define CLLD_1 (0x0200) /* Compare latch load sourec : 1 - TBR counts to 0 */
#define CLLD_2 (0x0400) /* Compare latch load sourec : 2 - up/down */
#define CLLD_3 (0x0600) /* Compare latch load sourec : 3 - TBR counts to TBCTL0 */
/* TB3IV Definitions */
#define TBIV_NONE (0x0000) /* No Interrupt pending */
#define TBIV_TBCCR1 (0x0002) /* TBCCR1_CCIFG */
#define TBIV_TBCCR2 (0x0004) /* TBCCR2_CCIFG */
#define TBIV_3 (0x0006) /* Reserved */
#define TBIV_4 (0x0008) /* Reserved */
#define TBIV_5 (0x000A) /* Reserved */
#define TBIV_6 (0x000C) /* Reserved */
#define TBIV_TBIFG (0x000E) /* TBIFG */
/*************************************************************
* Flash Memory
*************************************************************/
#define __MSP430_HAS_FLASH__ /* Definition to show that Module is available */
#define FCTL1_ 0x0128 /* FLASH Control 1 */
sfrw(FCTL1, FCTL1_);
#define FCTL2_ 0x012A /* FLASH Control 2 */
sfrw(FCTL2, FCTL2_);
#define FCTL3_ 0x012C /* FLASH Control 3 */
sfrw(FCTL3, FCTL3_);
#define FRKEY (0x9600) /* Flash key returned by read */
#define FWKEY (0xA500) /* Flash key for write */
#define FXKEY (0x3300) /* for use with XOR instruction */
#define ERASE (0x0002) /* Enable bit for Flash segment erase */
#define MERAS (0x0004) /* Enable bit for Flash mass erase */
#define WRT (0x0040) /* Enable bit for Flash write */
#define BLKWRT (0x0080) /* Enable bit for Flash segment write */
#define SEGWRT (0x0080) /* old definition */ /* Enable bit for Flash segment write */
#define FN0 (0x0001) /* Divide Flash clock by 1 to 64 using FN0 to FN5 according to: */
#define FN1 (0x0002) /* 32*FN5 + 16*FN4 + 8*FN3 + 4*FN2 + 2*FN1 + FN0 + 1 */
#ifndef FN2
#define FN2 (0x0004)
#endif
#ifndef FN3
#define FN3 (0x0008)
#endif
#ifndef FN4
#define FN4 (0x0010)
#endif
#define FN5 (0x0020)
#define FSSEL0 (0x0040) /* Flash clock select 0 */ /* to distinguish from USART SSELx */
#define FSSEL1 (0x0080) /* Flash clock select 1 */
#define FSSEL_0 (0x0000) /* Flash clock select: 0 - ACLK */
#define FSSEL_1 (0x0040) /* Flash clock select: 1 - MCLK */
#define FSSEL_2 (0x0080) /* Flash clock select: 2 - SMCLK */
#define FSSEL_3 (0x00C0) /* Flash clock select: 3 - SMCLK */
#define BUSY (0x0001) /* Flash busy: 1 */
#define KEYV (0x0002) /* Flash Key violation flag */
#define ACCVIFG (0x0004) /* Flash Access violation flag */
#define WAIT (0x0008) /* Wait flag for segment write */
#define LOCK (0x0010) /* Lock bit: 1 - Flash is locked (read only) */
#define EMEX (0x0020) /* Flash Emergency Exit */
/************************************************************
* Comparator A
************************************************************/
#define __MSP430_HAS_COMPA__ /* Definition to show that Module is available */
#define CACTL1_ 0x0059 /* Comparator A Control 1 */
sfrb(CACTL1, CACTL1_);
#define CACTL2_ 0x005A /* Comparator A Control 2 */
sfrb(CACTL2, CACTL2_);
#define CAPD_ 0x005B /* Comparator A Port Disable */
sfrb(CAPD, CAPD_);
#define CAIFG (0x01) /* Comp. A Interrupt Flag */
#define CAIE (0x02) /* Comp. A Interrupt Enable */
#define CAIES (0x04) /* Comp. A Int. Edge Select: 0:rising / 1:falling */
#define CAON (0x08) /* Comp. A enable */
#define CAREF0 (0x10) /* Comp. A Internal Reference Select 0 */
#define CAREF1 (0x20) /* Comp. A Internal Reference Select 1 */
#define CARSEL (0x40) /* Comp. A Internal Reference Enable */
#define CAEX (0x80) /* Comp. A Exchange Inputs */
#define CAREF_0 (0x00) /* Comp. A Int. Ref. Select 0 : Off */
#define CAREF_1 (0x10) /* Comp. A Int. Ref. Select 1 : 0.25*Vcc */
#define CAREF_2 (0x20) /* Comp. A Int. Ref. Select 2 : 0.5*Vcc */
#define CAREF_3 (0x30) /* Comp. A Int. Ref. Select 3 : Vt*/
#define CAOUT (0x01) /* Comp. A Output */
#define CAF (0x02) /* Comp. A Enable Output Filter */
#define P2CA0 (0x04) /* Comp. A Connect External Signal to CA0 : 1 */
#define P2CA1 (0x08) /* Comp. A Connect External Signal to CA1 : 1 */
#define CACTL24 (0x10)
#define CACTL25 (0x20)
#define CACTL26 (0x40)
#define CACTL27 (0x80)
#define CAPD0 (0x01) /* Comp. A Disable Input Buffer of Port Register .0 */
#define CAPD1 (0x02) /* Comp. A Disable Input Buffer of Port Register .1 */
#define CAPD2 (0x04) /* Comp. A Disable Input Buffer of Port Register .2 */
#define CAPD3 (0x08) /* Comp. A Disable Input Buffer of Port Register .3 */
#define CAPD4 (0x10) /* Comp. A Disable Input Buffer of Port Register .4 */
#define CAPD5 (0x20) /* Comp. A Disable Input Buffer of Port Register .5 */
#define CAPD6 (0x40) /* Comp. A Disable Input Buffer of Port Register .6 */
#define CAPD7 (0x80) /* Comp. A Disable Input Buffer of Port Register .7 */
/************************************************************
* ADC12
************************************************************/
#define __MSP430_HAS_ADC12__ /* Definition to show that Module is available */
#define ADC12CTL0_ 0x01A0 /* ADC12 Control 0 */
sfrw(ADC12CTL0, ADC12CTL0_);
#define ADC12CTL1_ 0x01A2 /* ADC12 Control 1 */
sfrw(ADC12CTL1, ADC12CTL1_);
#define ADC12IFG_ 0x01A4 /* ADC12 Interrupt Flag */
sfrw(ADC12IFG, ADC12IFG_);
#define ADC12IE_ 0x01A6 /* ADC12 Interrupt Enable */
sfrw(ADC12IE, ADC12IE_);
#define ADC12IV_ 0x01A8 /* ADC12 Interrupt Vector Word */
sfrw(ADC12IV, ADC12IV_);
#define ADC12MEM_ (0x0140) /* ADC12 Conversion Memory */
#ifndef __STDC__
#define ADC12MEM (ADC12MEM_) /* ADC12 Conversion Memory (for assembler) */
#else
#define ADC12MEM ((volatile int*) ADC12MEM_) /* ADC12 Conversion Memory (for C) */
#endif
#define ADC12MEM0_ 0x0140 /* ADC12 Conversion Memory 0 */
sfrw(ADC12MEM0, ADC12MEM0_);
#define ADC12MEM1_ 0x0142 /* ADC12 Conversion Memory 1 */
sfrw(ADC12MEM1, ADC12MEM1_);
#define ADC12MEM2_ 0x0144 /* ADC12 Conversion Memory 2 */
sfrw(ADC12MEM2, ADC12MEM2_);
#define ADC12MEM3_ 0x0146 /* ADC12 Conversion Memory 3 */
sfrw(ADC12MEM3, ADC12MEM3_);
#define ADC12MEM4_ 0x0148 /* ADC12 Conversion Memory 4 */
sfrw(ADC12MEM4, ADC12MEM4_);
#define ADC12MEM5_ 0x014A /* ADC12 Conversion Memory 5 */
sfrw(ADC12MEM5, ADC12MEM5_);
#define ADC12MEM6_ 0x014C /* ADC12 Conversion Memory 6 */
sfrw(ADC12MEM6, ADC12MEM6_);
#define ADC12MEM7_ 0x014E /* ADC12 Conversion Memory 7 */
sfrw(ADC12MEM7, ADC12MEM7_);
#define ADC12MEM8_ 0x0150 /* ADC12 Conversion Memory 8 */
sfrw(ADC12MEM8, ADC12MEM8_);
#define ADC12MEM9_ 0x0152 /* ADC12 Conversion Memory 9 */
sfrw(ADC12MEM9, ADC12MEM9_);
#define ADC12MEM10_ 0x0154 /* ADC12 Conversion Memory 10 */
sfrw(ADC12MEM10, ADC12MEM10_);
#define ADC12MEM11_ 0x0156 /* ADC12 Conversion Memory 11 */
sfrw(ADC12MEM11, ADC12MEM11_);
#define ADC12MEM12_ 0x0158 /* ADC12 Conversion Memory 12 */
sfrw(ADC12MEM12, ADC12MEM12_);
#define ADC12MEM13_ 0x015A /* ADC12 Conversion Memory 13 */
sfrw(ADC12MEM13, ADC12MEM13_);
#define ADC12MEM14_ 0x015C /* ADC12 Conversion Memory 14 */
sfrw(ADC12MEM14, ADC12MEM14_);
#define ADC12MEM15_ 0x015E /* ADC12 Conversion Memory 15 */
sfrw(ADC12MEM15, ADC12MEM15_);
#define ADC12MCTL_ (0x0080) /* ADC12 Memory Control */
#ifndef __STDC__
#define ADC12MCTL (ADC12MCTL_) /* ADC12 Memory Control (for assembler) */
#else
#define ADC12MCTL ((volatile char*) ADC12MCTL_) /* ADC12 Memory Control (for C) */
#endif
#define ADC12MCTL0_ 0x0080 /* ADC12 Memory Control 0 */
sfrb(ADC12MCTL0, ADC12MCTL0_);
#define ADC12MCTL1_ 0x0081 /* ADC12 Memory Control 1 */
sfrb(ADC12MCTL1, ADC12MCTL1_);
#define ADC12MCTL2_ 0x0082 /* ADC12 Memory Control 2 */
sfrb(ADC12MCTL2, ADC12MCTL2_);
#define ADC12MCTL3_ 0x0083 /* ADC12 Memory Control 3 */
sfrb(ADC12MCTL3, ADC12MCTL3_);
#define ADC12MCTL4_ 0x0084 /* ADC12 Memory Control 4 */
sfrb(ADC12MCTL4, ADC12MCTL4_);
#define ADC12MCTL5_ 0x0085 /* ADC12 Memory Control 5 */
sfrb(ADC12MCTL5, ADC12MCTL5_);
#define ADC12MCTL6_ 0x0086 /* ADC12 Memory Control 6 */
sfrb(ADC12MCTL6, ADC12MCTL6_);
#define ADC12MCTL7_ 0x0087 /* ADC12 Memory Control 7 */
sfrb(ADC12MCTL7, ADC12MCTL7_);
#define ADC12MCTL8_ 0x0088 /* ADC12 Memory Control 8 */
sfrb(ADC12MCTL8, ADC12MCTL8_);
#define ADC12MCTL9_ 0x0089 /* ADC12 Memory Control 9 */
sfrb(ADC12MCTL9, ADC12MCTL9_);
#define ADC12MCTL10_ 0x008A /* ADC12 Memory Control 10 */
sfrb(ADC12MCTL10, ADC12MCTL10_);
#define ADC12MCTL11_ 0x008B /* ADC12 Memory Control 11 */
sfrb(ADC12MCTL11, ADC12MCTL11_);
#define ADC12MCTL12_ 0x008C /* ADC12 Memory Control 12 */
sfrb(ADC12MCTL12, ADC12MCTL12_);
#define ADC12MCTL13_ 0x008D /* ADC12 Memory Control 13 */
sfrb(ADC12MCTL13, ADC12MCTL13_);
#define ADC12MCTL14_ 0x008E /* ADC12 Memory Control 14 */
sfrb(ADC12MCTL14, ADC12MCTL14_);
#define ADC12MCTL15_ 0x008F /* ADC12 Memory Control 15 */
sfrb(ADC12MCTL15, ADC12MCTL15_);
/* ADC12CTL0 */
#define ADC12SC (0x001) /* ADC12 Start Conversion */
#define ENC (0x002) /* ADC12 Enable Conversion */
#define ADC12TOVIE (0x004) /* ADC12 Timer Overflow interrupt enable */
#define ADC12OVIE (0x008) /* ADC12 Overflow interrupt enable */
#define ADC12ON (0x010) /* ADC12 On/enable */
#define REFON (0x020) /* ADC12 Reference on */
#define REF2_5V (0x040) /* ADC12 Ref 0:1.5V / 1:2.5V */
#define MSC (0x080) /* ADC12 Multiple SampleConversion */
#define SHT00 (0x0100) /* ADC12 Sample Hold 0 Select 0 */
#define SHT01 (0x0200) /* ADC12 Sample Hold 0 Select 1 */
#define SHT02 (0x0400) /* ADC12 Sample Hold 0 Select 2 */
#define SHT03 (0x0800) /* ADC12 Sample Hold 0 Select 3 */
#define SHT10 (0x1000) /* ADC12 Sample Hold 0 Select 0 */
#define SHT11 (0x2000) /* ADC12 Sample Hold 1 Select 1 */
#define SHT12 (0x4000) /* ADC12 Sample Hold 2 Select 2 */
#define SHT13 (0x8000) /* ADC12 Sample Hold 3 Select 3 */
#define MSH (0x080)
#define SHT0_0 (0x0000) /* ADC12 Sample Hold 0 Select Bit: 0 */
#define SHT0_1 (0x0100) /* ADC12 Sample Hold 0 Select Bit: 1 */
#define SHT0_2 (0x0200) /* ADC12 Sample Hold 0 Select Bit: 2 */
#define SHT0_3 (0x0300) /* ADC12 Sample Hold 0 Select Bit: 3 */
#define SHT0_4 (0x0400) /* ADC12 Sample Hold 0 Select Bit: 4 */
#define SHT0_5 (0x0500) /* ADC12 Sample Hold 0 Select Bit: 5 */
#define SHT0_6 (0x0600) /* ADC12 Sample Hold 0 Select Bit: 6 */
#define SHT0_7 (0x0700) /* ADC12 Sample Hold 0 Select Bit: 7 */
#define SHT0_8 (0x0800) /* ADC12 Sample Hold 0 Select Bit: 8 */
#define SHT0_9 (0x0900) /* ADC12 Sample Hold 0 Select Bit: 9 */
#define SHT0_10 (0x0A00) /* ADC12 Sample Hold 0 Select Bit: 10 */
#define SHT0_11 (0x0B00) /* ADC12 Sample Hold 0 Select Bit: 11 */
#define SHT0_12 (0x0C00) /* ADC12 Sample Hold 0 Select Bit: 12 */
#define SHT0_13 (0x0D00) /* ADC12 Sample Hold 0 Select Bit: 13 */
#define SHT0_14 (0x0E00) /* ADC12 Sample Hold 0 Select Bit: 14 */
#define SHT0_15 (0x0F00) /* ADC12 Sample Hold 0 Select Bit: 15 */
#define SHT1_0 (0x0000) /* ADC12 Sample Hold 1 Select Bit: 0 */
#define SHT1_1 (0x1000) /* ADC12 Sample Hold 1 Select Bit: 1 */
#define SHT1_2 (0x2000) /* ADC12 Sample Hold 1 Select Bit: 2 */
#define SHT1_3 (0x3000) /* ADC12 Sample Hold 1 Select Bit: 3 */
#define SHT1_4 (0x4000) /* ADC12 Sample Hold 1 Select Bit: 4 */
#define SHT1_5 (0x5000) /* ADC12 Sample Hold 1 Select Bit: 5 */
#define SHT1_6 (0x6000) /* ADC12 Sample Hold 1 Select Bit: 6 */
#define SHT1_7 (0x7000) /* ADC12 Sample Hold 1 Select Bit: 7 */
#define SHT1_8 (0x8000) /* ADC12 Sample Hold 1 Select Bit: 8 */
#define SHT1_9 (0x9000) /* ADC12 Sample Hold 1 Select Bit: 9 */
#define SHT1_10 (0xA000) /* ADC12 Sample Hold 1 Select Bit: 10 */
#define SHT1_11 (0xB000) /* ADC12 Sample Hold 1 Select Bit: 11 */
#define SHT1_12 (0xC000) /* ADC12 Sample Hold 1 Select Bit: 12 */
#define SHT1_13 (0xD000) /* ADC12 Sample Hold 1 Select Bit: 13 */
#define SHT1_14 (0xE000) /* ADC12 Sample Hold 1 Select Bit: 14 */
#define SHT1_15 (0xF000) /* ADC12 Sample Hold 1 Select Bit: 15 */
/* ADC12CTL1 */
#define ADC12BUSY (0x0001) /* ADC12 Busy */
#define CONSEQ0 (0x0002) /* ADC12 Conversion Sequence Select 0 */
#define CONSEQ1 (0x0004) /* ADC12 Conversion Sequence Select 1 */
#define ADC12SSEL0 (0x0008) /* ADC12 Clock Source Select 0 */
#define ADC12SSEL1 (0x0010) /* ADC12 Clock Source Select 1 */
#define ADC12DIV0 (0x0020) /* ADC12 Clock Divider Select 0 */
#define ADC12DIV1 (0x0040) /* ADC12 Clock Divider Select 1 */
#define ADC12DIV2 (0x0080) /* ADC12 Clock Divider Select 2 */
#define ISSH (0x0100) /* ADC12 Invert Sample Hold Signal */
#define SHP (0x0200) /* ADC12 Sample/Hold Pulse Mode */
#define SHS0 (0x0400) /* ADC12 Sample/Hold Source 0 */
#define SHS1 (0x0800) /* ADC12 Sample/Hold Source 1 */
#define CSTARTADD0 (0x1000) /* ADC12 Conversion Start Address 0 */
#define CSTARTADD1 (0x2000) /* ADC12 Conversion Start Address 1 */
#define CSTARTADD2 (0x4000) /* ADC12 Conversion Start Address 2 */
#define CSTARTADD3 (0x8000) /* ADC12 Conversion Start Address 3 */
#define CONSEQ_0 (0x0000) /* ADC12 Conversion Sequence Select: 0 */
#define CONSEQ_1 (0x0002) /* ADC12 Conversion Sequence Select: 1 */
#define CONSEQ_2 (0x0004) /* ADC12 Conversion Sequence Select: 2 */
#define CONSEQ_3 (0x0006) /* ADC12 Conversion Sequence Select: 3 */
#define ADC12SSEL_0 (0x0000) /* ADC12 Clock Source Select: 0 */
#define ADC12SSEL_1 (0x0008) /* ADC12 Clock Source Select: 1 */
#define ADC12SSEL_2 (0x0010) /* ADC12 Clock Source Select: 2 */
#define ADC12SSEL_3 (0x0018) /* ADC12 Clock Source Select: 3 */
#define ADC12DIV_0 (0x0000) /* ADC12 Clock Divider Select: 0 */
#define ADC12DIV_1 (0x0020) /* ADC12 Clock Divider Select: 1 */
#define ADC12DIV_2 (0x0040) /* ADC12 Clock Divider Select: 2 */
#define ADC12DIV_3 (0x0060) /* ADC12 Clock Divider Select: 3 */
#define ADC12DIV_4 (0x0080) /* ADC12 Clock Divider Select: 4 */
#define ADC12DIV_5 (0x00A0) /* ADC12 Clock Divider Select: 5 */
#define ADC12DIV_6 (0x00C0) /* ADC12 Clock Divider Select: 6 */
#define ADC12DIV_7 (0x00E0) /* ADC12 Clock Divider Select: 7 */
#define SHS_0 (0x0000) /* ADC12 Sample/Hold Source: 0 */
#define SHS_1 (0x0400) /* ADC12 Sample/Hold Source: 1 */
#define SHS_2 (0x0800) /* ADC12 Sample/Hold Source: 2 */
#define SHS_3 (0x0C00) /* ADC12 Sample/Hold Source: 3 */
#define CSTARTADD_0 (0x0000) /* ADC12 Conversion Start Address: 0 */
#define CSTARTADD_1 (0x1000) /* ADC12 Conversion Start Address: 1 */
#define CSTARTADD_2 (0x2000) /* ADC12 Conversion Start Address: 2 */
#define CSTARTADD_3 (0x3000) /* ADC12 Conversion Start Address: 3 */
#define CSTARTADD_4 (0x4000) /* ADC12 Conversion Start Address: 4 */
#define CSTARTADD_5 (0x5000) /* ADC12 Conversion Start Address: 5 */
#define CSTARTADD_6 (0x6000) /* ADC12 Conversion Start Address: 6 */
#define CSTARTADD_7 (0x7000) /* ADC12 Conversion Start Address: 7 */
#define CSTARTADD_8 (0x8000) /* ADC12 Conversion Start Address: 8 */
#define CSTARTADD_9 (0x9000) /* ADC12 Conversion Start Address: 9 */
#define CSTARTADD_10 (0xA000) /* ADC12 Conversion Start Address: 10 */
#define CSTARTADD_11 (0xB000) /* ADC12 Conversion Start Address: 11 */
#define CSTARTADD_12 (0xC000) /* ADC12 Conversion Start Address: 12 */
#define CSTARTADD_13 (0xD000) /* ADC12 Conversion Start Address: 13 */
#define CSTARTADD_14 (0xE000) /* ADC12 Conversion Start Address: 14 */
#define CSTARTADD_15 (0xF000) /* ADC12 Conversion Start Address: 15 */
/* ADC12MCTLx */
#define INCH0 (0x0001) /* ADC12 Input Channel Select Bit 0 */
#define INCH1 (0x0002) /* ADC12 Input Channel Select Bit 1 */
#define INCH2 (0x0004) /* ADC12 Input Channel Select Bit 2 */
#define INCH3 (0x0008) /* ADC12 Input Channel Select Bit 3 */
#define SREF0 (0x0010) /* ADC12 Select Reference Bit 0 */
#define SREF1 (0x0020) /* ADC12 Select Reference Bit 1 */
#define SREF2 (0x0040) /* ADC12 Select Reference Bit 2 */
#define EOS (0x0080) /* ADC12 End of Sequence */
#define INCH_0 (0) /* ADC12 Input Channel 0 */
#define INCH_1 (1) /* ADC12 Input Channel 1 */
#define INCH_2 (2) /* ADC12 Input Channel 2 */
#define INCH_3 (3) /* ADC12 Input Channel 3 */
#define INCH_4 (4) /* ADC12 Input Channel 4 */
#define INCH_5 (5) /* ADC12 Input Channel 5 */
#define INCH_6 (6) /* ADC12 Input Channel 6 */
#define INCH_7 (7) /* ADC12 Input Channel 7 */
#define INCH_8 (8) /* ADC12 Input Channel 8 */
#define INCH_9 (9) /* ADC12 Input Channel 9 */
#define INCH_10 (10) /* ADC12 Input Channel 10 */
#define INCH_11 (11) /* ADC12 Input Channel 11 */
#define INCH_12 (12) /* ADC12 Input Channel 12 */
#define INCH_13 (13) /* ADC12 Input Channel 13 */
#define INCH_14 (14) /* ADC12 Input Channel 14 */
#define INCH_15 (15) /* ADC12 Input Channel 15 */
#define SREF_0 (0x0000) /* ADC12 Select Reference 0 */
#define SREF_1 (0x0010) /* ADC12 Select Reference 1 */
#define SREF_2 (0x0020) /* ADC12 Select Reference 2 */
#define SREF_3 (0x0030) /* ADC12 Select Reference 3 */
#define SREF_4 (0x0040) /* ADC12 Select Reference 4 */
#define SREF_5 (0x0050) /* ADC12 Select Reference 5 */
#define SREF_6 (0x0060) /* ADC12 Select Reference 6 */
#define SREF_7 (0x0070) /* ADC12 Select Reference 7 */
/* ADC12IV Definitions */
#define ADC12IV_NONE (0x0000) /* No Interrupt pending */
#define ADC12IV_ADC12OVIFG (0x0002) /* ADC12OVIFG */
#define ADC12IV_ADC12TOVIFG (0x0004) /* ADC12TOVIFG */
#define ADC12IV_ADC12IFG0 (0x0006) /* ADC12IFG0 */
#define ADC12IV_ADC12IFG1 (0x0008) /* ADC12IFG1 */
#define ADC12IV_ADC12IFG2 (0x000A) /* ADC12IFG2 */
#define ADC12IV_ADC12IFG3 (0x000C) /* ADC12IFG3 */
#define ADC12IV_ADC12IFG4 (0x000E) /* ADC12IFG4 */
#define ADC12IV_ADC12IFG5 (0x0010) /* ADC12IFG5 */
#define ADC12IV_ADC12IFG6 (0x0012) /* ADC12IFG6 */
#define ADC12IV_ADC12IFG7 (0x0014) /* ADC12IFG7 */
#define ADC12IV_ADC12IFG8 (0x0016) /* ADC12IFG8 */
#define ADC12IV_ADC12IFG9 (0x0018) /* ADC12IFG9 */
#define ADC12IV_ADC12IFG10 (0x001A) /* ADC12IFG10 */
#define ADC12IV_ADC12IFG11 (0x001C) /* ADC12IFG11 */
#define ADC12IV_ADC12IFG12 (0x001E) /* ADC12IFG12 */
#define ADC12IV_ADC12IFG13 (0x0020) /* ADC12IFG13 */
#define ADC12IV_ADC12IFG14 (0x0022) /* ADC12IFG14 */
#define ADC12IV_ADC12IFG15 (0x0024) /* ADC12IFG15 */
/************************************************************
* DAC12
************************************************************/
#define __MSP430_HAS_DAC12_2__ /* Definition to show that Module is available */
#define DAC12_0CTL_ 0x01c0 /* DAC12_0 Control */
sfrw(DAC12_0CTL, DAC12_0CTL_);
#define DAC12_1CTL_ 0x01c2 /* DAC12_1 Control */
sfrw(DAC12_1CTL, DAC12_1CTL_);
#define DAC12GRP (0x0001) /* DAC12 group */
#define DAC12ENC (0x0002) /* DAC12 enable conversion */
#define DAC12IFG (0x0004) /* DAC12 interrupt flag */
#define DAC12IE (0x0008) /* DAC12 interrupt enable */
#define DAC12DF (0x0010) /* DAC12 data format */
#define DAC12AMP0 (0x0020) /* DAC12 amplifier bit 0 */
#define DAC12AMP1 (0x0040) /* DAC12 amplifier bit 1 */
#define DAC12AMP2 (0x0080) /* DAC12 amplifier bit 2 */
#define DAC12IR (0x0100) /* DAC12 input reference and output range */
#define DAC12CALON (0x0200) /* DAC12 calibration */
#define DAC12LSEL0 (0x0400) /* DAC12 load select bit 0 */
#define DAC12LSEL1 (0x0800) /* DAC12 load select bit 1 */
#define DAC12RES (0x1000) /* DAC12 resolution */
#define DAC12SREF0 (0x2000) /* DAC12 reference bit 0 */
#define DAC12SREF1 (0x4000) /* DAC12 reference bit 1 */
#define DAC12OPS (0x8000) /* DAC12 Operation Amp. */
#define DAC12AMP_0 (0x0000) /* DAC12 amplifier 0: off, 3-state */
#define DAC12AMP_1 (0x0020) /* DAC12 amplifier 1: off, off */
#define DAC12AMP_2 (0x0040) /* DAC12 amplifier 2: low, low */
#define DAC12AMP_3 (0x0060) /* DAC12 amplifier 3: low, medium */
#define DAC12AMP_4 (0x0080) /* DAC12 amplifier 4: low, high */
#define DAC12AMP_5 (0x00A0) /* DAC12 amplifier 5: medium, medium */
#define DAC12AMP_6 (0x00C0) /* DAC12 amplifier 6: medium, high */
#define DAC12AMP_7 (0x00E0) /* DAC12 amplifier 7: high, high */
#define DAC12LSEL_0 (0x0000) /* DAC12 load select 0: direct */
#define DAC12LSEL_1 (0x0400) /* DAC12 load select 1: latched with DAT */
#define DAC12LSEL_2 (0x0800) /* DAC12 load select 2: latched with pos. Timer_A3.OUT1 */
#define DAC12LSEL_3 (0x0C00) /* DAC12 load select 3: latched with pos. Timer_B7.OUT1 */
#define DAC12SREF_0 (0x0000) /* DAC12 reference 0: Vref+ */
#define DAC12SREF_1 (0x2000) /* DAC12 reference 1: Vref+ */
#define DAC12SREF_2 (0x4000) /* DAC12 reference 2: Veref+ */
#define DAC12SREF_3 (0x6000) /* DAC12 reference 3: Veref+ */
#define DAC12_0DAT_ 0x01c8 /* DAC12_0 Data */
sfrw(DAC12_0DAT, DAC12_0DAT_);
#define DAC12_1DAT_ 0x01ca /* DAC12_1 Data */
sfrw(DAC12_1DAT, DAC12_1DAT_);
/************************************************************
* DMA
************************************************************/
#define __MSP430_HAS_DMA_1__ /* Definition to show that Module is available */
#define DMACTL0_ 0x0122 /* DMA Module Control 0 */
sfrw(DMACTL0, DMACTL0_);
#define DMA0TSEL0 (0x0001) /* DMA channel 0 transfer select bit 0 */
#define DMA0TSEL1 (0x0002) /* DMA channel 0 transfer select bit 1 */
#define DMA0TSEL2 (0x0004) /* DMA channel 0 transfer select bit 2 */
#define DMA0TSEL3 (0x0008) /* DMA channel 0 transfer select bit 3 */
#define DMA0TSEL_0 (0x0000) /* DMA channel 0 transfer select 0: DMA_REQ (sw)*/
#define DMA0TSEL_1 (0x0001) /* DMA channel 0 transfer select 1: Timer_A (TACCR2.IFG) */
#define DMA0TSEL_2 (0x0002) /* DMA channel 0 transfer select 2: Timer_B (TBCCR2.IFG) */
#define DMA0TSEL_3 (0x0003) /* DMA channel 0 transfer select 3: UART0/I2C receive */
#define DMA0TSEL_4 (0x0004) /* DMA channel 0 transfer select 4: UART0/I2C transmit */
#define DMA0TSEL_5 (0x0005) /* DMA channel 0 transfer select 5: DAC12_0CTL.DAC12IFG */
#define DMA0TSEL_6 (0x0006) /* DMA channel 0 transfer select 6: ADC12 (ADC12IFG) */
#define DMA0TSEL_7 (0x0007) /* DMA channel 0 transfer select 7: Timer_A (TACCR0.IFG) */
#define DMA0TSEL_8 (0x0008) /* DMA channel 0 transfer select 8: Timer_B (TBCCR0.IFG) */
#define DMA0TSEL_9 (0x0009) /* DMA channel 0 transfer select 9: UART1 receive */
#define DMA0TSEL_10 (0x000A) /* DMA channel 0 transfer select 10: UART1 transmit */
#define DMA0TSEL_11 (0x000B) /* DMA channel 0 transfer select 11: Multiplier ready */
#define DMA0TSEL_14 (0x000E) /* DMA channel 0 transfer select 14: previous DMA channel DMA2IFG */
#define DMA0TSEL_15 (0x000F) /* DMA channel 0 transfer select 15: ext. Trigger (DMAE0) */
#define DMACTL1_ 0x0124 /* DMA Module Control 1 */
sfrw(DMACTL1, DMACTL1_);
#define ENNMI (0x0001) /* Enable NMI interruption of DMA */
#define ROUNDROBIN (0x0002) /* Round-Robin DMA channel priorities */
#define DMAONFETCH (0x0004) /* DMA transfer on instruction fetch */
#define DMA0CTL_ 0x01e0 /* DMA Channel 0 Control */
sfrw(DMA0CTL, DMA0CTL_);
#define DMAREQ (0x0001) /* Initiate DMA transfer with DMATSEL */
#define DMAABORT (0x0002) /* DMA transfer aborted by NMI */
#define DMAIE (0x0004) /* DMA interrupt enable */
#define DMAIFG (0x0008) /* DMA interrupt flag */
#define DMAEN (0x0010) /* DMA enable */
#define DMALEVEL (0x0020) /* DMA level sensitive trigger select */
#define DMASRCBYTE (0x0040) /* DMA source byte */
#define DMADSTBYTE (0x0080) /* DMA destination byte */
#define DMASRCINCR0 (0x0100) /* DMA source increment bit 0 */
#define DMASRCINCR1 (0x0200) /* DMA source increment bit 1 */
#define DMADSTINCR0 (0x0400) /* DMA destination increment bit 0 */
#define DMADSTINCR1 (0x0800) /* DMA destination increment bit 1 */
#define DMADT0 (0x1000) /* DMA transfer mode bit 0 */
#define DMADT1 (0x2000) /* DMA transfer mode bit 1 */
#define DMADT2 (0x4000) /* DMA transfer mode bit 2 */
#define DMASWDW (0x0000) /* DMA transfer: source word to destination word */
#define DMASBDW (0x0040) /* DMA transfer: source byte to destination word */
#define DMASWDB (0x0080) /* DMA transfer: source word to destination byte */
#define DMASBDB (0x00C0) /* DMA transfer: source byte to destination byte */
#define DMASRCINCR_0 (0x0000) /* DMA source increment 0: source address unchanged */
#define DMASRCINCR_1 (0x0100) /* DMA source increment 1: source address unchanged */
#define DMASRCINCR_2 (0x0200) /* DMA source increment 2: source address decremented */
#define DMASRCINCR_3 (0x0300) /* DMA source increment 3: source address incremented */
#define DMADSTINCR_0 (0x0000) /* DMA destination increment 0: destination address unchanged */
#define DMADSTINCR_1 (0x0400) /* DMA destination increment 1: destination address unchanged */
#define DMADSTINCR_2 (0x0800) /* DMA destination increment 2: destination address decremented */
#define DMADSTINCR_3 (0x0C00) /* DMA destination increment 3: destination address incremented */
#define DMADT_0 (0x0000) /* DMA transfer mode 0: single */
#define DMADT_1 (0x1000) /* DMA transfer mode 1: block */
#define DMADT_2 (0x2000) /* DMA transfer mode 2: interleaved */
#define DMADT_3 (0x3000) /* DMA transfer mode 3: interleaved */
#define DMADT_4 (0x4000) /* DMA transfer mode 4: single, repeat */
#define DMADT_5 (0x5000) /* DMA transfer mode 5: block, repeat */
#define DMADT_6 (0x6000) /* DMA transfer mode 6: interleaved, repeat */
#define DMADT_7 (0x7000) /* DMA transfer mode 7: interleaved, repeat */
#define DMA0SA_ 0x01e2 /* DMA Channel 0 Source Address */
sfrw(DMA0SA, DMA0SA_);
#define DMA0DA_ 0x01e4 /* DMA Channel 0 Destination Address */
sfrw(DMA0DA, DMA0DA_);
#define DMA0SZ_ 0x01e6 /* DMA Channel 0 Transfer Size */
sfrw(DMA0SZ, DMA0SZ_);
/************************************************************
* Operational Amplifier
************************************************************/
#define __MSP430_HAS_OA_3__ /* Definition to show that Module is available */
#define OA0CTL0_ 0x00C0 /* OA0 Control register 0 */
sfrb(OA0CTL0, OA0CTL0_);
#define OA0CTL1_ 0x00C1 /* OA0 Control register 1 */
sfrb(OA0CTL1, OA0CTL1_);
#define OA1CTL0_ 0x00C2 /* OA1 Control register 0 */
sfrb(OA1CTL0, OA1CTL0_);
#define OA1CTL1_ 0x00C3 /* OA1 Control register 1 */
sfrb(OA1CTL1, OA1CTL1_);
#define OA2CTL0_ 0x00C4 /* OA2 Control register 0 */
sfrb(OA2CTL0, OA2CTL0_);
#define OA2CTL1_ 0x00C5 /* OA2 Control register 1 */
sfrb(OA2CTL1, OA2CTL1_);
#define OAADC0 (0x01) /* OAx output to ADC12 input channel select 0 */
#define OAADC1 (0x02) /* OAx output to ADC12 input channel select 1 */
#define OAPM0 (0x04) /* OAx Power mode select 0 */
#define OAPM1 (0x08) /* OAx Power mode select 1 */
#define OAP0 (0x10) /* OAx Non-inverting input select 0 */
#define OAP1 (0x20) /* OAx Non-inverting input select 1 */
#define OAN0 (0x40) /* OAx Inverting input select 0 */
#define OAN1 (0x80) /* OAx Inverting input select 1 */
#define OAPM_0 (0x00) /* OAx Power mode select: off */
#define OAPM_1 (0x04) /* OAx Power mode select: slow */
#define OAPM_2 (0x08) /* OAx Power mode select: meduim */
#define OAPM_3 (0x0C) /* OAx Power mode select: fast */
#define OAP_0 (0x00) /* OAx Non-inverting input select 00 */
#define OAP_1 (0x10) /* OAx Non-inverting input select 01 */
#define OAP_2 (0x20) /* OAx Non-inverting input select 10 */
#define OAP_3 (0x30) /* OAx Non-inverting input select 11 */
#define OAN_0 (0x00) /* OAx Inverting input select 00 */
#define OAN_1 (0x40) /* OAx Inverting input select 01 */
#define OAN_2 (0x80) /* OAx Inverting input select 10 */
#define OAN_3 (0xC0) /* OAx Inverting input select 11 */
#define OARRIP (0x01) /* OAx Rail-to-Rail Input off */
//#define Reserved (0x02) /* */
#define OAFC0 (0x04) /* OAx Function control 0 */
#define OAFC1 (0x08) /* OAx Function control 1 */
#define OAFC2 (0x10) /* OAx Function control 2 */
#define OAFBR0 (0x20) /* OAx Feedback resistor select 0 */
#define OAFBR1 (0x40) /* OAx Feedback resistor select 1 */
#define OAFBR2 (0x80) /* OAx Feedback resistor select 2 */
#define OAFC_0 (0x00) /* OAx Function: Gen. Purpose */
#define OAFC_1 (0x04) /* OAx Function: Unity gain buffer */
#define OAFC_2 (0x08) /* OAx Function: Reserved */
#define OAFC_3 (0x0C) /* OAx Function: Comparator */
#define OAFC_4 (0x10) /* OAx Function: Non-Inverting PGA */
#define OAFC_5 (0x14) /* OAx Function: Reserved */
#define OAFC_6 (0x18) /* OAx Function: Inverting PGA */
#define OAFC_7 (0x1C) /* OAx Function: Differential PGA */
#define OAFBR_0 (0x00) /* OAx Feedback resistor: Tap 0 */
#define OAFBR_1 (0x20) /* OAx Feedback resistor: Tap 1 */
#define OAFBR_2 (0x40) /* OAx Feedback resistor: Tap 2 */
#define OAFBR_3 (0x60) /* OAx Feedback resistor: Tap 3 */
#define OAFBR_4 (0x80) /* OAx Feedback resistor: Tap 4 */
#define OAFBR_5 (0xA0) /* OAx Feedback resistor: Tap 5 */
#define OAFBR_6 (0xC0) /* OAx Feedback resistor: Tap 6 */
#define OAFBR_7 (0xE0) /* OAx Feedback resistor: Tap 7 */
/************************************************************
* Interrupt Vectors (offset from 0xFFE0)
************************************************************/
#define BASICTIMER_VECTOR (0x0000) /* 0xFFE0 Basic Timer */
#define PORT2_VECTOR (0x0002) /* 0xFFE2 Port 2 */
#define DAC12_DMA_VECTOR (0x0006) /* 0xFFE6 DAC 12 */
#define PORT1_VECTOR (0x0008) /* 0xFFE8 Port 1 */
#define TIMERA1_VECTOR (0x000A) /* 0xFFEA Timer A CC1-2, TA */
#define TIMERA0_VECTOR (0x000C) /* 0xFFEC Timer A CC0 */
#define ADC12_VECTOR (0x000E) /* 0xFFEE ADC */
#define USART0TX_VECTOR (0x0010) /* 0xFFF0 USART 0 Transmit */
#define USART0RX_VECTOR (0x0012) /* 0xFFF2 USART 0 Receive */
#define WDT_VECTOR (0x0014) /* 0xFFF4 Watchdog Timer */
#define COMPARATORA_VECTOR (0x0016) /* 0xFFF6 Comparator A */
#define TIMERB1_VECTOR (0x0018) /* 0xFFF8 Timer B CC1-2, TB */
#define TIMERB0_VECTOR (0x001A) /* 0xFFFA Timer B CC0 */
#define NMI_VECTOR (0x001C) /* 0xFFFC Non-maskable */
#define RESET_VECTOR (0x001E) /* 0xFFFE Reset [Highest Priority] */
#define UART0TX_VECTOR USART0TX_VECTOR
#define UART0RX_VECTOR USART0RX_VECTOR
#define ADC_VECTOR ADC12_VECTOR
/************************************************************
* End of Modules
************************************************************/
#ifdef __cplusplus
}
#endif /* extern "C" */
#endif /* #ifndef __msp430xG43x */
|