cluster-agents 1:1.0.4-0ubuntu2 / usr / lib / ocf / resource.d / heartbeat / ServeRAID

#!/bin/sh
#
# 
# ServeRAID
#
# Description:	Enables/Disables shared ServeRAID merge groups
#
# Author:	Alan Robertson, Renzo Alejandro Granados
#
# Support:	linux-ha@lists.linux-ha.org
#
# License:	GNU General Public License (GPL)
#
# Copyright:	(C) 2002-2005 International Business Machines
#		(C) 2002 Renzo Alejandro Granados
#
# usage: ./ServeRAID (start|stop|status|monitor|validate-all|meta-data)
#
#	  OCF parameters are as below:
#		OCF_RESKEY_serveraid
#                  (Adapter number of the ServeRAID adapter)
#		OCF_RESKEY_mergegroup
#                  (MergeGroup # of the logical drive under consideration)
#
# The ServeRAID clustering model is a bit odd, and its terminology needs
# a little explanation
#
#	Logical Volume - a particular SCSI id {target id and LUN} on
#		a particular controller.
#
#	Merge Group - when active on one side or the other of the ServeRAID
#		configuration it corresponds with a logical drive.
#		Merge group numbers are permanently assigned to a particular
#		chunk of storage.  Shared merge groups are in the
#		range of 1 to 8, and are largely arbitrary.
#		Unshared merge groups start at 200.
#		We can only deal with shared merge groups.  When a merge
#		group is activated on one of the controllers, it becomes
#		a logical volume on that system.  NOTE:  The order in
#		which the Merge Groups are activated determines which
#		SCSI Ids they become.  This makes for extra headaches
#		for this script to deal with.  It also means that if
#		you have more than one shared ServeRAID merge group on
#		a particular controller, that the SCSI IDs will not
#		be constant.  This requires mounting by uuid or label.
#
#	One of the ServerRAID controllers has to be configured with
#	SCSI initiator ID 6, and the other with SCSI id 7.
#
#	At this time, the ServeRAID clustering solution only works with
#	RAID 1 setups.  It does NOT support RAID 5.  This is a firmware
#	bug in the ServeRAID where it doesn't fail over correctly
#	if the RAID5 array is in a critical state...
#
#	Note that this script requires ServeRAID software version 6.10 or
#	later.  This software is now available from IBM.
#
# An example usage in /etc/ha.d/haresources: 
#       node1  10.0.0.170 ServeRAID::1::1
#

#	Older ServeRAID utility returns 1 when it succeeds (weird)
#	BUT - the newly released version is more normal...

#######################################################################
# Initialization:

: ${OCF_FUNCTIONS_DIR=${OCF_ROOT}/lib/heartbeat}
. ${OCF_FUNCTIONS_DIR}/ocf-shellfuncs

#######################################################################

srsuccess=0
SCSI="scsi "

usage() {
  cat <<-!
	usage: $0 (start|stop|status|monitor|validate-all|meta-data)

	You have to set the following environment virables before running $0 :
		OCF_RESKEY_serveraid
			(Adapter number of the ServeRAID adapter)
		OCF_RESKEY_mergegroup
			(MergeGroup # of the logical drive under consideration)

	ServeRAID adapters are numbered starting from 1.

	The shared merge group number is a number between 1 and 8 inclusive.
	It indicates to the controller which logical disk to fail over.

                node1  10.0.0.170 ServeRAID::1::1

	PREREQUISITES:
	You must configure your ServeRAID adapters for clustering for this
	to work.

	To do this, you must use the bootable "ServeRAID Support CD" and right
	click your controller and pick "configure for clustering".  The Linux
	version of the ServeRAID manager does not have the "configure for
	clustering" option.

	You will need at least version 6.10 (~July 2003 release) of the ipssend
	command for this script to work.

	!
}

meta_data() {
	cat <<END
<?xml version="1.0"?>
<!DOCTYPE resource-agent SYSTEM "ra-api-1.dtd">
<resource-agent name="ServeRAID">
<version>1.0</version>

<longdesc lang="en">
Resource script for ServeRAID. It enables/disables shared ServeRAID merge groups.
</longdesc>
<shortdesc lang="en">Enables and disables shared ServeRAID merge groups</shortdesc>

<parameters>
<parameter name="serveraid" unique="0" required="1">
<longdesc lang="en">
The adapter number of the ServeRAID adapter.
</longdesc>
<shortdesc lang="en">serveraid</shortdesc>
<content type="integer" default="" />
</parameter>

<parameter name="mergegroup" unique="0" required="1">
<longdesc lang="en">
The logical drive under consideration. 
</longdesc>
<shortdesc lang="en">mergegroup</shortdesc>
<content type="integer" default="" />
</parameter>
</parameters>

<actions>
<action name="start" timeout="40" />
<action name="stop" timeout="40" />
<action name="status" depth="0" timeout="20" interval="10" />
<action name="monitor" depth="0" timeout="20" interval="10" />
<action name="validate-all" timeout="5" />
<action name="meta-data" timeout="5" />
<action name="methods" timeout="5" />
</actions>
</resource-agent>
END
}

ServeRAID_methods() {
  cat <<-!
	start
	stop
	status
	validate-all
	methods
	usage
	meta-data
	!
}

ServeRAIDSCSI="/proc/scsi/ips"

 
IPS=ipssend
proc_scsi=/proc/scsi/scsi


parseinst() {
  sr_adapter=error
  sr_mergegroup=error
  hostid=error
  sr_logicaldrivenumber=error
  if
    [ $# -ne 2 ]
  then
    ocf_log err "Invalid ServeRAID instance: $*"
    exit $OCF_ERR_ARGS
  fi
  PerlScript='next unless /^Host/; $_ .= <>.<>; print "$1 " if /SERVERAID/ and /Proces/ and /scsi(\d+)/'
  # Get the list of host ids of the ServeRAID host adapters
  hostlist=`$PERL -ne "${PerlScript}" <$proc_scsi`
  # Figure the host id of the desired ServeRAID adapter
  hostid=`echo $hostlist | cut -d' ' -f$1`
  if
    [ ! -f "$ServeRAIDSCSI/$hostid" ]
  then
    ocf_log err "No such ServeRAID adapter: $1"
    exit $OCF_ERR_ARGS
  fi
    
  case $2 in
    [1-8]);;
    *)	ocf_log err "Invalid Shared Merge Group Number: $2"
	exit $OCF_ERR_ARGS;;
  esac
  sr_adapter=$1
  sr_mergegroup=$2
  CheckRaidLevel
  return $?
}

SRLogicalDriveConfig() {
  $IPS getconfig $sr_adapter ld
}

MergeGroupToSCSI_ID() {

  PerlScript="while (<>) {
	/logical drive number *([0-9]+)/i && (\$ld=\$1);
	/part of merge group *: *$sr_mergegroup *\$/i && print \$ld - 1, \"\n\";
  }"

  ID=`SRLogicalDriveConfig | $PERL -e "$PerlScript"`
  case $ID in
    [0-9]*)	echo "$ID"; return 0;;
    *)		return 1;;
  esac
}

MergeGroupRaidLevel() {

  PerlScript="while (<>) {
	/RAID level *: *([0-9]+[A-Za-z]*)/i && (\$ld=\$1);
	/part of merge group *: *$sr_mergegroup *\$/i && print \$ld, \"\n\";
  }"

  Level=`SRLogicalDriveConfig | $PERL -e "$PerlScript"`
  case $Level in
    ?*)	echo "$Level"; return 0;;
    *)		return 1;;
  esac
}

CheckRaidLevel() {
  RAIDlevel=`MergeGroupRaidLevel`
  case $RAIDlevel in
    *5*)
      ocf_log err "ServeRAID device $sr_adapter $sr_mergegroup is RAID level $RAIDlevel"
      ocf_log err "This level of ServeRAID RAID is not supported for failover by the firmware."
      exit $OCF_ERR_GENERIC;;
  esac
  return $OCF_SUCCESS
}

    
	

ReleaseSCSI() {
  targetid=`MergeGroupToSCSI_ID`
  echo "${SCSI}remove-single-device $hostid 0 $targetid 0" > $proc_scsi
}

AddSCSI() {
  targetid=`MergeGroupToSCSI_ID`
  echo "${SCSI}add-single-device $hostid 0 $targetid 0" > $proc_scsi
}

#
# start: Enable the given ServeRAID device
#
ServeRAID_start() {
  if
     ServeRAID_status $serveraid $mergegroup
  then
     ocf_log debug "ServeRAID merge group $serveraid $mergegroup is running."
     return $OCF_SUCCESS
  else
    if
      #
      # Normally we do a MERGE PARTNER, but if we still own the drive for
      # some reason, then we'll need to do a MERGE OWN instead...
      #
      out=`$IPS MERGE $sr_adapter $sr_mergegroup PARTNER 2>&1`
      if
        [ $? -eq $srsuccess ]
      then
	ocf_log info "$out"
      else
        ocf_run $IPS MERGE $sr_adapter $sr_mergegroup OWN
      fi
    then
      : OK All is well!
      targetid=`MergeGroupToSCSI_ID`
      sr_logicaldrivenumber=`expr $targetid + 1`
      #run $IPS SYNCH $sr_adapter $sr_logicaldrivenumber &
      # This version of the SYNCH command requires the 6.10 or later
      # ServeRAID support CD.
      # To avoid issues when called by lrmd, redirect stdout->stderr.
      # Use () to create a subshell to make the redirection be synchronized.
      ( ocf_run $IPS SYNCH $sr_adapter $sr_mergegroup & ) >&2
      AddSCSI
    else
      return $OCF_ERR_GENERIC
    fi
  fi
  if
    ServeRAID_status "$@"
  then
    return $OCF_SUCCESS
  else
    ocf_log err "ServeRAID device $1 not active!"
    exit $OCF_ERR_GENERIC
  fi
}


#
# stop: Disable the given ServeRAID device
#
ServeRAID_stop() {
  parseinst "$@"
  ReleaseSCSI
  if
    ocf_run $IPS UNMERGE $sr_adapter $sr_mergegroup
  then
    : UNMERGE $sr_adapter $sr_mergegroup worked
  fi
  if
    ServeRAID_status "$@"
  then
    ocf_log err "ServeRAID device $@ is still active!"
    return $OCF_ERR_GENERIC
  else
    return $OCF_SUCCESS
  fi
}


#
# status: is the given device now available?
#
ServeRAID_status() {
  parseinst "$@"
  #
  # The output we're looking for
  #	Part of merge group            : 2   
  #
  SRLogicalDriveConfig 		\
  |	grep -i "part of merge group[ 	]*: *$sr_mergegroup *\$" >/dev/null
}

#
# validate_all: are the OCF instance parameters valid?
#
ServeRAID_validate_all() {
  check_binary $PERL

# parseinst() will do all the work...
  parseinst "$@"
  return $?
}

if
  ( [ $# -ne 1 ] )
then
  usage
  exit $OCF_ERR_ARGS
fi

# These operations don't require OCF instance parameters to be set
case "$1" in
  meta-data)
	meta_data
	exit $OCF_SUCCESS;;
#
# methods: What methods do we support?
#
  methods) 
	ServeRAID_methods
	exit $?;;
  usage)
	usage
	exit $OCF_SUCCESS;;
  *)
	;;
esac

if 
  ( [ -z "$OCF_RESKEY_serveraid" ] || [ -z "$OCF_RESKEY_mergegroup" ] )
then
  ocf_log err "You have to set the OCF_RESKEY_serveraid and OCF_RESKEY_mergegroup\n 
        enviroment virables before running $0 !"
#  usage
  exit $OCF_ERR_GENERIC
fi

: Right Number of arguments..
serveraid=$OCF_RESKEY_serveraid
mergegroup=$OCF_RESKEY_mergegroup

# Look for the start, stop, status, or methods calls...
case "$1" in
  stop)
	ServeRAID_stop $serveraid $mergegroup
	exit $?;;
  start)
	ServeRAID_start $serveraid $mergegroup
	exit $?;;
  status|monitor) 
	if
	  ServeRAID_status $serveraid $mergegroup
	then
	  ocf_log debug "ServeRAID merge group $serveraid $mergegroup is running."
	  exit $OCF_SUCCESS
	else
	  ocf_log debug "ServeRAID merge group $serveraid $mergegroup is stopped."
	  exit $OCF_NOT_RUNNING
	fi
	exit $?;;
  validate-all)
	ServeRAID_validate_all $serveraid $mergegroup
	exit $?;;
  *)
    usage
    exit $OCF_ERR_UNIMPLEMENTED;;

esac