This file is indexed.

/usr/include/libdvbsec/dvbsec_cfg.h is in dvb-apps 1.1.1+rev1500-1.

This file is owned by root:root, with mode 0o644.

The actual contents of the file can be viewed below.

  1
  2
  3
  4
  5
  6
  7
  8
  9
 10
 11
 12
 13
 14
 15
 16
 17
 18
 19
 20
 21
 22
 23
 24
 25
 26
 27
 28
 29
 30
 31
 32
 33
 34
 35
 36
 37
 38
 39
 40
 41
 42
 43
 44
 45
 46
 47
 48
 49
 50
 51
 52
 53
 54
 55
 56
 57
 58
 59
 60
 61
 62
 63
 64
 65
 66
 67
 68
 69
 70
 71
 72
 73
 74
 75
 76
 77
 78
 79
 80
 81
 82
 83
 84
 85
 86
 87
 88
 89
 90
 91
 92
 93
 94
 95
 96
 97
 98
 99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
/**
 * dvbsec_cfg (i.e. linuxtv SEC format) configuration file support.
 *
 * Copyright (c) 2006 by Andrew de Quincey <adq_dvb@lidskialf.net>
 *
 * This library is free software; you can redistribute it and/or modify
 * it under the terms of the GNU Lesser General Public License as
 * published by the Free Software Foundation; either version 2.1 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU Lesser General Public License for more details.
 *
 * You should have received a copy of the GNU Lesser General Public
 * License along with this library; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
 */

/**
 * This library allows SEC (Satellite Equipment Control) configurations
 * to be retrieved. Each configuration is identified by a unique satellite_id.
 *
 * In order to make things as easy as possible for users, there are a set of
 * defaults hardcoded into the library covering the majority of LNB types. When
 * these are used, the standard back-compatable sequence defined in the DISEQC
 * standard will be used - this will suffice for _most_ situations.
 *
 * UNIVERSAL - Europe, 10800 to 11800 MHz and 11600 to 12700 Mhz, Dual LO, loband 9750, hiband 10600 MHz.
 * DBS - Expressvu, North America, 12200 to 12700 MHz, Single LO, 11250 MHz.
 * STANDARD - 10945 to 11450 Mhz, Single LO, 10000Mhz.
 * ENHANCED - Astra, 10700 to 11700 MHz, Single LO, 9750MHz.
 * C-BAND - Big Dish, 3700 to 4200 MHz, Single LO, 5150Mhz.
 * C-MULTI - Big Dish - Multipoint LNBf, 3700 to 4200 MHz, Dual LO, H:5150MHz, V:5750MHz.
 *
 * However, for the power user with a more complex setup, these simple defaults
 * are not enough. Therefore, it is also possible to define additional SEC
 * configurations in an external configuration file. This file consists of multiple
 * entries in the following format:
 *
 * [sec]
 * name=<sec_id>
 * switch-frequency=<switching frequency (SLOF)>
 * lof-lo-v=<low band + V + frequency>
 * lof-lo-h=<low band + H + frequency>
 * lof-lo-l=<low band + L + frequency>
 * lof-lo-r=<low band + R + frequency>
 * lof-hi-v=<high band + V + frequency>
 * lof-hi-h=<high band + H + frequency>
 * lof-hi-l=<high band + L + frequency>
 * lof-hi-r=<high band + R + frequency>
 * config-type=<none|power|standard|advanced>
 * cmd-lo-v=<sec sequence>
 * cmd-lo-h=<sec sequence>
 * cmd-lo-r=<sec sequence>
 * cmd-lo-l=<sec sequence>
 * cmd-hi-v=<sec sequence>
 * cmd-hi-h=<sec sequence>
 * cmd-hi-r=<sec sequence>
 * cmd-hi-l=<sec sequence>
 *
 * The sec_id is whatever unique value you wish. If it is the same as one of the hardcoded defaults, the configuration
 * 	details from the file will be used instead of the hardcoded ones.
 * The switch-frequency (or SLOF) indicates the point seperating low band frequencies from high band frequencies.
 * 	Set this value to 0 if there is only one frequency band.
 * The lof-lo-v is the frequency adjustment for V + low band (i.e. less than SLOF), or is used if switch-frequency==0.
 * The lof-lo-h is the frequency adjustment for H + low band (i.e. less than SLOF), or is used if switch-frequency==0.
 * The lof-lo-l is the frequency adjustment for L + low band (i.e. less than SLOF), or is used if switch-frequency==0.
 * The lof-lo-r is the frequency adjustment for R + low band (i.e. less than SLOF), or is used if switch-frequency==0.
 * The lof-hi-v is the frequency adjustment for V + high band (unused if switch-frequency==0).
 * The lof-hi-h is the frequency adjustment for H + high band (unused if switch-frequency==0).
 * The lof-hi-l is the frequency adjustment for L + high band (unused if switch-frequency==0).
 * The lof-hi-r is the frequency adjustment for R + high band (unused if switch-frequency==0).
 *
 * config-type indicates the desired type of SEC command to use, it may be:
 * 	none - No SEC commands will be issued (frequency adjustment will still be performed).
 * 	power - Only the SEC power is turned on.
 * 	standard - The standard DISEQC back compatable sequence will be issued.
 * 	advanced - The DISEQC sequence described in the appropriate sec cmd string will be used.
 *
 * The cmd-<lo|hi>-<v|h|l|r> describes the SEC cmd string to use in advanced mode for each of the possible combinations of
 * frequency band and polarisation. If a certain combination is not required, it may be omitted. It consists of a
 * space seperated combination of commands - those available are as follows:
 *
 *	tone(<0|1>)  - control the 22kHz tone 0:off, 1:on
 *	voltage(<0|13|18>) - control the LNB voltage 0v, 13v, or 18v
 * 	toneburst(<a|b>) - issue a toneburst (mini command) for position A or B.
 *	highvoltage(<0|1>) - control high lnb voltage for long cable runs 0: normal, 1:add 1v to LNB voltage.
 *	dishnetworks(<integer>) - issue a dishnetworks legacy command.
 *	wait(<integer>) - wait for the given number of milliseconds.
 *	Dreset(<address>, <0|1>) - control the reset state of a DISEC device, 0:disable reset, 1:enable reset.
 *	Dpower(<address>, <0|1>) - control the power of a DISEC device, 0:off, 1:on.
 *	Dcommitted(<address>, <h|l|x>, <v|h|l|r|x>, <a|b|x>, <a|b|x>) - Write to the committed switches of a DISEC device.
 * 		The parameters are for band, polarisation, satelliteposition, switchoption:
 * 			band - h:high band, l:low band
 * 			polarisation - v: vertical, h:horizontal,r:right,l:left
 * 			satelliteposition - a:position A, b: position B
 * 			switchoption - a:position A, b: position B
 * 		The special value 'x' means "no change to this switch".
 *
 *	Duncommitted(<address>, <a|b|x>, <a|b|x>, <a|b|x>, <a|b|x>) - Write to the uncommitted switches of the a DISEC device.
 * 		The parameters are for switch1, switch2, switch3, switch4, and may be set to position a or b.
 * 		The special value 'x' means "no change to this switch".
 *
 * 	Dfrequency(<address>, <frequency in GHz>) - set the frequency of a DISEC device.
 * 	Dchannel(<address>, <channel id>) - set the desired channel id of a DISEC device.
 * 	Dgotopreset(<address>, <preset id>) - tell a DISEC satellite positioner to move to the given preset id.
 * 	Dgotobearing(<address>, <bearing in degrees>) - tell a DISEQC terrestrial rotator to go to the
 *		given bearing (range -256.0 -> 512.0 degrees, fractions allowed).
 *
 * 	In the above DISEQC commands, <address> is the integer (normally in hex format) address of the
 * 		diseqc device to communicate with. A list of possiblities is as follows:
 *
 * 	DISEQC_ADDRESS_ANY_DEVICE		= 0x00
 *
 *	DISEQC_ADDRESS_ANY_LNB_SWITCHER_SMATV	= 0x10
 *	DISEQC_ADDRESS_LNB			= 0x11
 *	DISEQC_ADDRESS_LNB_WITH_LOOP		= 0x12
 *	DISEQC_ADDRESS_SWITCHER			= 0x14
 *	DISEQC_ADDRESS_SWITCHER_WITH_LOOP	= 0x15
 *	DISEQC_ADDRESS_SMATV			= 0x18
 *
 *	DISEQC_ADDRESS_ANY_POLARISER		= 0x20
 *	DISEQC_ADDRESS_LINEAR_POLARISER		= 0x21
 *
 *	DISEQC_ADDRESS_ANY_POSITIONER		= 0x30
 *	DISEQC_ADDRESS_POLAR_AZIMUTH_POSITIONER	= 0x31
 *	DISEQC_ADDRESS_ELEVATION_POSITIONER	= 0x32
 *
 *	DISEQC_ADDRESS_ANY_INSTALLER_AID	= 0x40
 *	DISEQC_ADDRESS_SIGNAL_STRENGTH		= 0x41
 *
 *	DISEQC_ADDRESS_ANY_INTERFACE		= 0x70
 *	DISEQC_ADDRESS_HEADEND_INTERFACE	= 0x71
 *
 *	DISEQC_ADDRESS_REALLOC_BASE		= 0x60
 *	DISEQC_ADDRESS_OEM_BASE			= 0xf0
 */

#ifndef DVBSEC_CFG_H
#define DVBSEC_CFG_H 1

#ifdef __cplusplus
extern "C"
{
#endif

#include <stdio.h>
#include <stdint.h>
#include <libdvbsec/dvbsec_api.h>

/**
 * Callback function used in dvbsec_cfg_load().
 *
 * @param arg Private information to caller.
 * @param channel The current channel details.
 * @return 0 to continue, 1 to stop loading.
 */
typedef int (*dvbsec_cfg_callback)(void *arg, struct dvbsec_config *sec);

/**
 * Load an SEC file.
 *
 * @param f File to load from.
 * @param arg Value to pass to 'arg' in callback above.
 * @param cb Callback function called for each sec loaded from the file.
 * @return 0 on success, or nonzero error code on failure.
 */
extern int dvbsec_cfg_load(FILE *f, void *arg,
			   dvbsec_cfg_callback cb);

/**
 * Convenience function to parse an SEC config file. This will also consult the set
 * of hardcoded defaults if no config file was supplied, or a match was not found in
 * the config file.
 *
 * @param config_file Config filename to load, or NULL to just check defaults.
 * @param sec_id ID of SEC configuration.
 * @param sec Where to put the details if found.
 * @return 0 on success, nonzero on error.
 */
extern int dvbsec_cfg_find(const char *config_file,
			   const char *sec_id,
			   struct dvbsec_config *sec);

/**
 * Save SEC format config file.
 *
 * @param f File to save to.
 * @param secs Pointer to array of SECs to save.
 * @param count Number of entries in the above array.
 * @return 0 on success, or nonzero error code on failure.
 */
extern int dvbsec_cfg_save(FILE *f,
			   struct dvbsec_config *secs,
			   int count);

#ifdef __cplusplus
}
#endif

#endif