yate-core 5.0.0-1-1 / etc / yate / analog.conf

; This file keep the analog channel configuration
; Each section except for 'general' configures a group of lines or an individual line
; Each section named 'line group-name/circuit-code' or
; 'line group-name/fxo/circuit-code' configure a line belonging to group
; <group-name> or <group-name/fxo> and using the circuit with code
; <circuit-code> in that group. The 'fxo' part means that the line is the FXO
; listening the FXS end of a monitored line (<group-name>'s type must be monitor)
; For each [group-name] section the configuration file is searched for
; [line group-name/circuit-code] or [line group-name/fxo/circuit-code] sections
;
; NOTES:
;
; - Avoid use of the slash ('/') character in group names
; - Lines belonging to the same group always have the same type
; - For recorders (monitor groups), 2 lines must be configured: an FXO line listening
;   the FXS end of monitored line and an FXS one listening the FXO end of the
;   monitored line.
; - When recording, the first channel is the caller and the second one is the called
;
; ROUTING:
;
; Calls can be routed by setting the group name or line address as destination
; ^123$=analog/office-fxs/3
; ^012$=analog/office-fxs
; ^13\(*.)$=analog/office-fxo/\1
; ^013$=analog/office-fxo;
; When routing, the recorders will set the type, format and callsource parameters
; The 'type' parameter will have the value 'record', the 'format' parameter is the
; format of the data source (usually alaw or mulaw) and 'callsource' parameter
; will have the value 'fxs' or 'fxo' which indicates the call initiator (this is
; the end of the monitored line, not he recorder's one)
;
; [default]
; ${type}^record$=goto record
;
; [record]
; .*=wave/record//tmp/${caller}_${called}_$(++$recidx).${format}
;
; [$once]
; recidx=0
;
; In this example, a recorder is routed to wavefile to be recorded in a file name given
; by caller, called, incremented value of the 'recidx' variable and the data format

[general]
; This section keep general settings for the analog module

; echocancel: boolean: Automatically enable or disable individual line echo
; canceller on call begin/end
; If missing or invalid, no automatic echo canceller operation will be done
; This parameter can be overridden in group and line sections
; The hardware driver must support this feature
;echocancel=

; call-ended-target: string: Target to play when an FXS line is disconnected and
; the FXO is still off hook
; This option is used to set an announcement to the FXO to tell it that the call
; was ended by its peer
; This parameter is applied on reload and can be overridden in group sections
; Defaults to tone/busy
;call-ended-target=tone/busy

; outoforder-target: string: Target to play when an FXS line is disconnected and
; the FXO is off hook for a long period of time
; This tone is played after the call ended tone
; This parameter is applied on reload and can be overridden in group sections
; Defaults to tone/outoforder
;outoforder-target=tone/outoforder

; lang: string: Language for tones played by the analog module
; This parameter is added to the call.preroute message dispatched by an FXS line
; This parameter is applied on reload and can be overridden in group sections
;lang=

; call-ended-playtime: integer: The time to play the call-ended-target prompt on an FXS line
; After that, the outoforder-target will be played until the user closes (set on hook) the line
; This parameter can be overridden in group sections
; Defaults to 2000
;call-ended-playtime=

; ring-timeout: integer: The time allowed to ellapse between rings on incoming calls on FXO lines
; This timer can be used when there is no way to know when the remote FXS closes an unaswered
; call (no line polarity changes)
; This timer can also be used to configure the FXO lines belonging to recorder (monitor) groups
; If used, incoming unaswered calls or recorders will be terminated when this time ellapsed
; This parameter can be overridden in group and line sections
; Set to 0 to disable this timer. Defaults to 10000
;ring-timeout=

; alarm-timeout: integer: The time allowed for an active call to remain alive with its line
; in alarm (out of order)
; A T1 line can detect link failures and notify the upper layer
; When notified on line failure, active unanswered calls are terminated immediately.
; Answered calls are allowed to persist for the given period
; Set to 0 to disable this timer. Defaults to 30000
;alarm-timeout=30000

;[group-name]
; This section is used to configure a group of analog lines

; enable: boolean: This option is used to create or remove a group of analog lines
; Applied on reload
; Defaults to yes
;enable=yes

; type: string: Group type. This is the type of the local end of all analog lines
; belonging to this group
; Allowed values:
; FXO: The line is a telephone set linked to a telephone exchange
; FXS: The line is a telephone exchange linked to a telephone set
; monitor: This group contains line monitors (recorders)
; This option is required on creation
;type=

; spans: string: Specify the span(s) containing the analog channel(s)
; The value of this option must be a section name specified in a telephony module
; Multiple spans may be specified by simply separating them with a comma (',') character
; This option is required on creation if group's type is not monitor
;spans=

; fxs,fxo: string: Specify the span(s) containing the analog channel(s) used by
; the FXS and FXO lines belonging to monitors
; The value of this option must be a section name specified in a telephony module
; Multiple spans may be specified by simply separating them with a comma (',') character
; This option is required on creation if group's type is monitor
;fxs=
;fxo=

; useallcircuits: boolean: Create lines for all circuits belonging to this group
; This parameter is processed only when creating lines
; If disabled, only lines declared in existing sections with will be created
; Use line sections to override group parameters
; Defaults to enable
;useallcircuits=enable

; delaydial: integer: Delay sending number on FXO lines
; This option is used to delay sending the called number (if any)
; Defaults to 2000 if missing or invalid
; Set to 0 to send number just after receiving the confirmation of hook off
; operation completion
; This parameter can be overridden in line sections and in the routing process
; Ignored if type is not FXO
;delaydial=2000

; dtmfinband: boolean: Enable to send the DTMF data in band on analog lines belonging
; to this group
; If disabled, the DTMF will be sent through the line's hardware if possible
; This parameter just set the order to try sending the DTMFs: if disabled and the line
; fails to send the DTMF through the hardware, it will send it in band
; This parameter can be overridden in line sections
; Defaults to disable
;dtmfinband=disable

; answer-on-polarity: boolean: This parameter is used by an FXO line to wait for line
; polarity change as a signal that an outgoing call was answered by the remote end
; If disabled, the call will be considerred answered as soon as the destination
; number is sent (even if the number is empty)
; Care must be taken when setting this option to yes: the telephone exchange (FXS) might
; not be able to change line polarity on answer or the hardware might not be able to
; detect such an event: the outgoing calls will never be answered
; This parameter can be overridden in line sections
; Defaults to no
;answer-on-polarity=no

; hangup-on-polarity: boolean: This parameter is used by an FXO line to handle line
; polarity change as a signal that a call was terminated by the remote end (on hook)
; For outgoing calls on lines with answer-on-polarity enabled the first polarity change
; will be treated as an off hook (answer) event and a second one will be considerred
; an on hook (hang up) event
; For outgoing calls on lines with answer-on-polarity disabled or for incoming calls,
; if this parameter is enabled the line polarity change will be treated as an
; on hook (hang up) event
; This parameter can be overridden in line sections
; Defaults to no
;hangup-on-polarity=no

; callsetup: string: This parameter is used to detect (FXO) or send (FXS) line
; setup data (such as caller id)
; Allowed values:
; after: send/detect call setup after the first ring and before the second one
; before: send/detect call setup before the first ring
; none: No call setup detect or send
; This parameter can be overridden in line sections
; Defaults to after if missing or invalid
;callsetup=after

; ringback: boolean: Offer a ringback tone even if not provided by peer channel
; This requires ringback tone generation support from the analog circuit driver
;ringback=no

; debuglevel: integer: The debug level of this group
; Applied on reload
; Defaults to the current debug level if missing or invalid
; NOTE: If 0, no debug messages will be printed out from this group or lines belonging to it
;debuglevel=

;[line group-name/circuit-code] or
;[line group-name/fxo/circuit-code]
; This section is used to configure an analog line belonging to a group of lines
; The line address (group-name/circuit-code) will be used to route a call to it

; enable: boolean: This option is used to create or remove an analog line
; When removed, any active call on this line will remain (the line will be destroyed on termination)
; Applied on reload
; Defaults to yes
;enable=yes

; out-of-service: boolean: This option is used to put a line in out of service or in service state
; When out of service, no calls can be done through the line and any active call
; on this line will be terminated
; Applied on reload
; Defaults to no
;out-of-service=no