/usr/bin/xdg-email is in xdg-utils 1.1.1-1ubuntu1.16.04.3.
This file is owned by root:root, with mode 0o755.
The actual contents of the file can be viewed below.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765 766 767 768 769 770 771 772 773 774 775 776 777 778 779 780 781 782 783 784 785 786 787 788 789 790 791 792 793 794 795 796 797 798 799 800 801 802 803 804 805 806 807 808 809 810 811 812 813 814 815 816 817 818 819 820 821 822 823 824 825 826 827 828 829 830 831 832 833 834 835 836 837 838 839 840 841 842 843 844 845 846 847 848 849 850 851 852 853 854 855 856 857 858 859 860 861 862 863 864 865 866 867 868 869 870 871 872 873 874 875 876 877 878 879 880 881 882 883 884 885 886 887 888 889 890 891 892 893 894 895 896 897 898 899 900 901 902 903 904 905 906 907 908 909 910 911 912 913 914 915 916 917 918 919 920 921 922 923 924 925 926 927 928 929 930 931 932 933 934 935 936 937 938 939 940 941 942 943 944 945 946 947 948 949 950 951 952 953 954 955 956 957 958 959 960 961 962 963 964 965 966 967 968 969 970 971 972 973 974 975 976 977 978 979 980 981 982 983 984 985 986 987 988 989 990 991 992 993 994 995 996 997 998 999 1000 1001 1002 1003 1004 1005 1006 1007 1008 | #!/bin/sh
#---------------------------------------------
# xdg-email
#
# Utility script to open the users favorite email program, using the
# RFC 2368 mailto: URI spec
#
# Refer to the usage() function below for usage.
#
# Copyright 2009-2010, Fathi Boudra <fabo@freedesktop.org>
# Copyright 2009-2010, Rex Dieter <rdieter@fedoraproject.org>
# Copyright 2006, Kevin Krammer <kevin.krammer@gmx.at>
# Copyright 2006, Jeremy White <jwhite@codeweavers.com>
#
# LICENSE:
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included
# in all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
# OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
# THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
# OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
# ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
# OTHER DEALINGS IN THE SOFTWARE.
#
#---------------------------------------------
manualpage()
{
cat << _MANUALPAGE
Name
xdg-email - command line tool for sending mail using the user's preferred
e-mail composer
Synopsis
xdg-email [--utf8] [--cc address] [--bcc address] [--subject text] [--body text
] [--attach file] [ mailto-uri | address(es) ]
xdg-email { --help | --manual | --version }
Description
xdg-email opens the user's preferred e-mail composer in order to send a mail to
address(es) or mailto-uri. RFC2368 defines mailto: URIs. xdg-email limits
support to, cc, subject and body fields in mailto-uri, all other fields are
silently ignored. address(es) must follow the syntax of RFC822. Multiple
addresses may be provided as separate arguments.
All information provided on the command line is used to prefill corresponding
fields in the user's e-mail composer. The user will have the opportunity to
change any of this information before actually sending the e-mail.
xdg-email is for use inside a desktop session only. It is not recommended to
use xdg-email as root.
Options
--utf8
Indicates that all command line options that follow are in utf8. Without
this option, command line options are expected to be encoded according to
locale. If the locale already specifies utf8 this option has no effect.
This option does not affect mailto URIs that are passed on the command
line.
--cc address
Specify a recipient to be copied on the e-mail.
--bcc address
Specify a recipient to be blindly copied on the e-mail.
--subject text
Specify a subject for the e-mail.
--body text
Specify a body for the e-mail. Since the user will be able to make changes
before actually sending the e-mail, this can be used to provide the user
with a template for the e-mail. text may contain linebreaks.
--attach file
Specify an attachment for the e-mail. file must point to an existing file.
Some e-mail applications require the file to remain present after xdg-email
returns.
--help
Show command synopsis.
--manual
Show this manual page.
--version
Show the xdg-utils version information.
Environment Variables
xdg-email honours the following environment variables:
XDG_UTILS_DEBUG_LEVEL
Setting this environment variable to a non-zero numerical value makes
xdg-email do more verbose reporting on stderr. Setting a higher value
increases the verbosity.
Exit Codes
An exit code of 0 indicates success while a non-zero exit code indicates
failure. The following failure codes can be returned:
1
Error in command line syntax.
2
One of the files passed on the command line did not exist.
3
A required tool could not be found.
4
The action failed.
5
No permission to read one of the files passed on the command line.
See Also
xdg-open(1), xdg-mime(1), MIME applications associations specification, RFC
6068 - The 'mailto' URI Scheme
Examples
xdg-email 'Jeremy White <jwhite@example.com>'
xdg-email --attach /tmp/logo.png \
--subject 'Logo contest' \
--body 'Attached you find the logo for the contest.' \
'jwhite@example.com'
xdg-email --subject 'Your password is about to expire' \
'jwhite@example.com' 'bastian@example.com' 'whipple@example.com'
_MANUALPAGE
}
usage()
{
cat << _USAGE
xdg-email - command line tool for sending mail using the user's preferred
e-mail composer
Synopsis
xdg-email [--utf8] [--cc address] [--bcc address] [--subject text] [--body text
] [--attach file] [ mailto-uri | address(es) ]
xdg-email { --help | --manual | --version }
_USAGE
}
#@xdg-utils-common@
#----------------------------------------------------------------------------
# Common utility functions included in all XDG wrapper scripts
#----------------------------------------------------------------------------
DEBUG()
{
[ -z "${XDG_UTILS_DEBUG_LEVEL}" ] && return 0;
[ ${XDG_UTILS_DEBUG_LEVEL} -lt $1 ] && return 0;
shift
echo "$@" >&2
}
# This handles backslashes but not quote marks.
first_word()
{
read first rest
echo "$first"
}
#-------------------------------------------------------------
# map a binary to a .desktop file
binary_to_desktop_file()
{
search="${XDG_DATA_HOME:-$HOME/.local/share}:${XDG_DATA_DIRS:-/usr/local/share:/usr/share}"
binary="`which "$1"`"
binary="`readlink -f "$binary"`"
base="`basename "$binary"`"
IFS=:
for dir in $search; do
unset IFS
[ "$dir" ] || continue
[ -d "$dir/applications" ] || [ -d "$dir/applnk" ] || continue
for file in "$dir"/applications/*.desktop "$dir"/applications/*/*.desktop "$dir"/applnk/*.desktop "$dir"/applnk/*/*.desktop; do
[ -r "$file" ] || continue
# Check to make sure it's worth the processing.
grep -q "^Exec.*$base" "$file" || continue
# Make sure it's a visible desktop file (e.g. not "preferred-web-browser.desktop").
grep -Eq "^(NoDisplay|Hidden)=true" "$file" && continue
command="`grep -E "^Exec(\[[^]=]*])?=" "$file" | cut -d= -f 2- | first_word`"
command="`which "$command"`"
if [ x"`readlink -f "$command"`" = x"$binary" ]; then
# Fix any double slashes that got added path composition
echo "$file" | sed -e 's,//*,/,g'
return
fi
done
done
}
#-------------------------------------------------------------
# map a .desktop file to a binary
## FIXME: handle vendor dir case
desktop_file_to_binary()
{
search="${XDG_DATA_HOME:-$HOME/.local/share}:${XDG_DATA_DIRS:-/usr/local/share:/usr/share}"
desktop="`basename "$1"`"
IFS=:
for dir in $search; do
unset IFS
[ "$dir" ] && [ -d "$dir/applications" ] || continue
file="$dir/applications/$desktop"
[ -r "$file" ] || continue
# Remove any arguments (%F, %f, %U, %u, etc.).
command="`grep -E "^Exec(\[[^]=]*])?=" "$file" | cut -d= -f 2- | first_word`"
command="`which "$command"`"
readlink -f "$command"
return
done
}
#-------------------------------------------------------------
# Exit script on successfully completing the desired operation
exit_success()
{
if [ $# -gt 0 ]; then
echo "$@"
echo
fi
exit 0
}
#-----------------------------------------
# Exit script on malformed arguments, not enough arguments
# or missing required option.
# prints usage information
exit_failure_syntax()
{
if [ $# -gt 0 ]; then
echo "xdg-email: $@" >&2
echo "Try 'xdg-email --help' for more information." >&2
else
usage
echo "Use 'man xdg-email' or 'xdg-email --manual' for additional info."
fi
exit 1
}
#-------------------------------------------------------------
# Exit script on missing file specified on command line
exit_failure_file_missing()
{
if [ $# -gt 0 ]; then
echo "xdg-email: $@" >&2
fi
exit 2
}
#-------------------------------------------------------------
# Exit script on failure to locate necessary tool applications
exit_failure_operation_impossible()
{
if [ $# -gt 0 ]; then
echo "xdg-email: $@" >&2
fi
exit 3
}
#-------------------------------------------------------------
# Exit script on failure returned by a tool application
exit_failure_operation_failed()
{
if [ $# -gt 0 ]; then
echo "xdg-email: $@" >&2
fi
exit 4
}
#------------------------------------------------------------
# Exit script on insufficient permission to read a specified file
exit_failure_file_permission_read()
{
if [ $# -gt 0 ]; then
echo "xdg-email: $@" >&2
fi
exit 5
}
#------------------------------------------------------------
# Exit script on insufficient permission to write a specified file
exit_failure_file_permission_write()
{
if [ $# -gt 0 ]; then
echo "xdg-email: $@" >&2
fi
exit 6
}
check_input_file()
{
if [ ! -e "$1" ]; then
exit_failure_file_missing "file '$1' does not exist"
fi
if [ ! -r "$1" ]; then
exit_failure_file_permission_read "no permission to read file '$1'"
fi
}
check_vendor_prefix()
{
file_label="$2"
[ -n "$file_label" ] || file_label="filename"
file=`basename "$1"`
case "$file" in
[[:alpha:]]*-*)
return
;;
esac
echo "xdg-email: $file_label '$file' does not have a proper vendor prefix" >&2
echo 'A vendor prefix consists of alpha characters ([a-zA-Z]) and is terminated' >&2
echo 'with a dash ("-"). An example '"$file_label"' is '"'example-$file'" >&2
echo "Use --novendor to override or 'xdg-email --manual' for additional info." >&2
exit 1
}
check_output_file()
{
# if the file exists, check if it is writeable
# if it does not exists, check if we are allowed to write on the directory
if [ -e "$1" ]; then
if [ ! -w "$1" ]; then
exit_failure_file_permission_write "no permission to write to file '$1'"
fi
else
DIR=`dirname "$1"`
if [ ! -w "$DIR" ] || [ ! -x "$DIR" ]; then
exit_failure_file_permission_write "no permission to create file '$1'"
fi
fi
}
#----------------------------------------
# Checks for shared commands, e.g. --help
check_common_commands()
{
while [ $# -gt 0 ] ; do
parm="$1"
shift
case "$parm" in
--help)
usage
echo "Use 'man xdg-email' or 'xdg-email --manual' for additional info."
exit_success
;;
--manual)
manualpage
exit_success
;;
--version)
echo "xdg-email 1.1.0 rc3"
exit_success
;;
esac
done
}
check_common_commands "$@"
[ -z "${XDG_UTILS_DEBUG_LEVEL}" ] && unset XDG_UTILS_DEBUG_LEVEL;
if [ ${XDG_UTILS_DEBUG_LEVEL-0} -lt 1 ]; then
# Be silent
xdg_redirect_output=" > /dev/null 2> /dev/null"
else
# All output to stderr
xdg_redirect_output=" >&2"
fi
#--------------------------------------
# Checks for known desktop environments
# set variable DE to the desktop environments name, lowercase
detectDE()
{
# see https://bugs.freedesktop.org/show_bug.cgi?id=34164
unset GREP_OPTIONS
if [ -n "${XDG_CURRENT_DESKTOP}" ]; then
case "${XDG_CURRENT_DESKTOP}" in
# only recently added to menu-spec, pre-spec X- still in use
Cinnamon|X-Cinnamon)
DE=cinnamon;
;;
ENLIGHTENMENT)
DE=enlightenment;
;;
# GNOME, GNOME-Classic:GNOME, or GNOME-Flashback:GNOME
GNOME*)
DE=gnome;
;;
KDE)
DE=kde;
;;
LXDE)
DE=lxde;
;;
MATE)
DE=mate;
;;
XFCE)
DE=xfce
;;
X-Generic)
DE=generic
;;
esac
fi
if [ x"$DE" = x"" ]; then
# classic fallbacks
if [ x"$KDE_FULL_SESSION" != x"" ]; then DE=kde;
elif [ x"$GNOME_DESKTOP_SESSION_ID" != x"" ]; then DE=gnome;
elif [ x"$MATE_DESKTOP_SESSION_ID" != x"" ]; then DE=mate;
elif `dbus-send --print-reply --dest=org.freedesktop.DBus /org/freedesktop/DBus org.freedesktop.DBus.GetNameOwner string:org.gnome.SessionManager > /dev/null 2>&1` ; then DE=gnome;
elif xprop -root _DT_SAVE_MODE 2> /dev/null | grep ' = \"xfce4\"$' >/dev/null 2>&1; then DE=xfce;
elif xprop -root 2> /dev/null | grep -i '^xfce_desktop_window' >/dev/null 2>&1; then DE=xfce
elif echo $DESKTOP | grep -q '^Enlightenment'; then DE=enlightenment;
fi
fi
if [ x"$DE" = x"" ]; then
# fallback to checking $DESKTOP_SESSION
case "$DESKTOP_SESSION" in
gnome)
DE=gnome;
;;
LXDE|Lubuntu)
DE=lxde;
;;
MATE)
DE=mate;
;;
xfce|xfce4|'Xfce Session')
DE=xfce;
;;
esac
fi
if [ x"$DE" = x"" ]; then
# fallback to uname output for other platforms
case "$(uname 2>/dev/null)" in
CYGWIN*)
DE=cygwin;
;;
Darwin)
DE=darwin;
;;
esac
fi
if [ x"$DE" = x"gnome" ]; then
# gnome-default-applications-properties is only available in GNOME 2.x
# but not in GNOME 3.x
which gnome-default-applications-properties > /dev/null 2>&1 || DE="gnome3"
fi
}
#----------------------------------------------------------------------------
# kfmclient exec/openURL can give bogus exit value in KDE <= 3.5.4
# It also always returns 1 in KDE 3.4 and earlier
# Simply return 0 in such case
kfmclient_fix_exit_code()
{
version=`LC_ALL=C.UTF-8 kde-config --version 2>/dev/null | grep '^KDE'`
major=`echo $version | sed 's/KDE.*: \([0-9]\).*/\1/'`
minor=`echo $version | sed 's/KDE.*: [0-9]*\.\([0-9]\).*/\1/'`
release=`echo $version | sed 's/KDE.*: [0-9]*\.[0-9]*\.\([0-9]\).*/\1/'`
test "$major" -gt 3 && return $1
test "$minor" -gt 5 && return $1
test "$release" -gt 4 && return $1
return 0
}
run_thunderbird()
{
local THUNDERBIRD MAILTO NEWMAILTO TO CC BCC SUBJECT BODY ATTACH
THUNDERBIRD="$1"
MAILTO=$(echo "$2" | sed 's/^mailto://')
echo "$MAILTO" | grep -qs "^?"
if [ "$?" = "0" ] ; then
MAILTO=$(echo "$MAILTO" | sed 's/^?//')
else
MAILTO=$(echo "$MAILTO" | sed 's/^/to=/' | sed 's/?/\&/')
fi
MAILTO=$(echo "$MAILTO" | sed 's/&/\n/g')
TO=$(/bin/echo -e $(echo "$MAILTO" | grep '^to=' | sed 's/^to=//;s/%\(..\)/\\x\1/g' | awk '{ printf "%s,",$0 }'))
CC=$(/bin/echo -e $(echo "$MAILTO" | grep '^cc=' | sed 's/^cc=//;s/%\(..\)/\\x\1/g' | awk '{ printf "%s,",$0 }'))
BCC=$(/bin/echo -e $(echo "$MAILTO" | grep '^bcc=' | sed 's/^bcc=//;s/%\(..\)/\\x\1/g' | awk '{ printf "%s,",$0 }'))
SUBJECT=$(echo "$MAILTO" | grep '^subject=' | tail -n 1)
BODY=$(echo "$MAILTO" | grep '^body=' | tail -n 1)
ATTACH=$(/bin/echo -e $(echo "$MAILTO" | grep '^attach=' | sed 's/^attach=//;s/%\(..\)/\\x\1/g' | awk '{ printf "%s,",$0 }' | sed 's/,$//'))
if [ -z "$TO" ] ; then
NEWMAILTO=
else
NEWMAILTO="to='$TO'"
fi
if [ -n "$CC" ] ; then
NEWMAILTO="${NEWMAILTO},cc='$CC'"
fi
if [ -n "$BCC" ] ; then
NEWMAILTO="${NEWMAILTO},bcc='$BCC'"
fi
if [ -n "$SUBJECT" ] ; then
NEWMAILTO="${NEWMAILTO},$SUBJECT"
fi
if [ -n "$BODY" ] ; then
NEWMAILTO="${NEWMAILTO},$BODY"
fi
if [ -n "$ATTACH" ] ; then
NEWMAILTO="${NEWMAILTO},attachment='${ATTACH}'"
fi
NEWMAILTO=$(echo "$NEWMAILTO" | sed 's/^,//')
DEBUG 1 "Running $THUNDERBIRD -compose \"$NEWMAILTO\""
"$THUNDERBIRD" -compose "$NEWMAILTO"
if [ $? -eq 0 ]; then
exit_success
else
exit_failure_operation_failed
fi
}
run_sylpheed()
{
DEBUG 1 "Running $1 --compose \"$2\""
"$1" --compose "$2"
if [ $? -eq 0 ]; then
exit_success
else
exit_failure_operation_failed
fi
}
open_kde()
{
if [ -n "$KDE_SESSION_VERSION" ] && [ "$KDE_SESSION_VERSION" -ge 5 ]; then
local kreadconfig=kreadconfig$KDE_SESSION_VERSION
else
local kreadconfig=kreadconfig
fi
if which $kreadconfig >/dev/null 2>&1; then
local profile=$($kreadconfig --file emaildefaults \
--group Defaults --key Profile)
if [ -n "$profile" ]; then
local client=$($kreadconfig --file emaildefaults \
--group "PROFILE_$profile" \
--key EmailClient \
| cut -d ' ' -f 1)
if echo "$client" | grep -Eq 'thunderbird|icedove'; then
run_thunderbird "$client" "$1"
fi
fi
fi
local command
case "$KDE_SESSION_VERSION" in
'') command=kmailservice ;;
4) command=kde-open ;;
*) command=kde-open$KDE_SESSION_VERSION ;;
esac
if which $command >/dev/null 2>&1; then
DEBUG 1 "Running $command \"$1\""
if [ "$KDE_SESSION_VERSION" = 3 ]; then
# KDE3 uses locale's encoding when decoding the URI,
# so set it to UTF-8
LC_ALL=C.UTF-8 $command "$1"
else
$command "$1"
fi
else
DEBUG 1 "$command missing; trying generic mode instead."
open_generic "$1"
fi
if [ $? = 0 ]; then
exit_success
else
exit_failure_operation_failed
fi
}
open_gnome3()
{
local client
local desktop
desktop=`xdg-mime query default "x-scheme-handler/mailto"`
client=`desktop_file_to_binary "$desktop"`
echo $client | grep -E 'thunderbird|icedove' > /dev/null 2>&1
if [ $? -eq 0 ] ; then
run_thunderbird "$client" "$1"
fi
if gvfs-open --help 2>/dev/null 1>&2; then
DEBUG 1 "Running gvfs-open \"$1\""
gvfs-open "$1"
else
DEBUG 1 "Running gnome-open \"$1\""
gnome-open "$1"
fi
if [ $? -eq 0 ]; then
exit_success
else
exit_failure_operation_failed
fi
}
open_gnome()
{
local client
client=`gconftool-2 --get /desktop/gnome/url-handlers/mailto/command | cut -d ' ' -f 1` || ""
echo $client | grep -E 'thunderbird|icedove' > /dev/null 2>&1
if [ $? -eq 0 ] ; then
run_thunderbird "$client" "$1"
fi
if gvfs-open --help 2>/dev/null 1>&2; then
DEBUG 1 "Running gvfs-open \"$1\""
gvfs-open "$1"
else
DEBUG 1 "Running gnome-open \"$1\""
gnome-open "$1"
fi
if [ $? -eq 0 ]; then
exit_success
else
exit_failure_operation_failed
fi
}
open_xfce()
{
DEBUG 1 "Running exo-open \"$1\""
exo-open "$1"
if [ $? -eq 0 ]; then
exit_success
else
exit_failure_operation_failed
fi
}
open_envvar()
{
local OLDIFS="$IFS"
IFS=:
for i in $MAILER; do
IFS="$OLDIFS"
eval "$i" '"$1"'
if [ $? -eq 0 ]; then
exit_success
fi
done
exit_failure_operation_failed
}
open_lxde()
{
DEBUG 3 "Running open_lxde \"$1\""
local client
local desktop
desktop=`xdg-mime query default "x-scheme-handler/mailto"`
client=`desktop_file_to_binary "$desktop"`
# If no xdg-mime default was set,
# and if we are running Lubuntu, fallback to sylpheed
if [ -z "$desktop" -a "$DESKTOP_SESSION" = "Lubuntu" ]; then
client=`desktop_file_to_binary "sylpheed.desktop"`
fi
echo $client | grep thunderbird > /dev/null 2>&1
if [ $? -eq 0 ] ; then
run_thunderbird "$client" "$1"
fi
echo $client | grep sylpheed > /dev/null 2>&1
if [ $? -eq 0 ] ; then
DEBUG 3 "Running run_sylpheed \"$client\" \"$1\""
run_sylpheed "$client" "$1"
fi
if [ $? -eq 0 ]; then
exit_success
else
exit_failure_operation_failed
fi
}
open_generic()
{
local client
local desktop
desktop=`xdg-mime query default "x-scheme-handler/mailto"`
client=`desktop_file_to_binary "$desktop"`
echo $client | grep -E 'thunderbird|icedove' > /dev/null 2>&1
if [ $? -eq 0 ] ; then
run_thunderbird "$client" "$1"
fi
xdg-open "$1"
local ret=$?
# 3 means exit_failure_operation_impossible
if [ $ret != 3 ]; then
exit $ret
fi
IFS=":"
for browser in $BROWSER; do
if [ x"$browser" != x"" ]; then
browser_with_arg=`printf "$browser" "$1" 2>/dev/null`
if [ $? -ne 0 ]; then browser_with_arg=$browser;
fi
if [ x"$browser_with_arg" = x"$browser" ]; then "$browser" "$1";
else $browser_with_arg;
fi
if [ $? -eq 0 ]; then exit_success;
fi
fi
done
exit_failure_operation_impossible "no method available for opening '$1'"
}
url_encode()
{
# The shell needs the default internal field separator
# otherwise it would search for $utf8 as a command in whole.
IFS=" "
str=$(echo "$1" | $utf8)
local ORIG_LANG="$LANG"
local ORIG_LC_ALL="$LC_ALL"
LANG=C
LC_ALL=C
result=$(echo "$str" | awk '
BEGIN {
for ( i=1; i<=255; ++i ) ord [ sprintf ("%c", i) "" ] = i + 0
e = ""
linenr = 1
}
{
if ( linenr++ != 1 ) {
e = e "%0D%0A"
}
for ( i=1; i<=length ($0); ++i ) {
c = substr ($0, i, 1)
if ( ord [c] > 127 ) {
e = e "%" sprintf("%02X", ord [c])
} else if ( c ~ /[@a-zA-Z0-9.\-\\\/]/ ) {
e = e c
} else {
e = e "%" sprintf("%02X", ord [c])
}
}
}
END {
print e
}
')
LANG="$ORIG_LANG"
LC_ALL="$ORIG_LC_ALL"
}
options=
mailto=
utf8="iconv -t utf8"
while [ $# -gt 0 ] ; do
parm="$1"
shift
case "$parm" in
--utf8)
utf8="cat"
;;
--to)
if [ -z "$1" ] ; then
exit_failure_syntax "email address argument missing for --to"
fi
url_encode "$1"
options="${options}to=${result}&"
shift
;;
--cc)
if [ -z "$1" ] ; then
exit_failure_syntax "email address argument missing for --cc"
fi
url_encode "$1"
options="${options}cc=${result}&"
shift
;;
--bcc)
if [ -z "$1" ] ; then
exit_failure_syntax "email address argument missing for --bcc"
fi
url_encode "$1"
options="${options}bcc=${result}&"
shift
;;
--subject)
if [ -z "$1" ] ; then
exit_failure_syntax "text argument missing for --subject option"
fi
url_encode "$1"
options="${options}subject=${result}&"
shift
;;
--body)
if [ -z "$1" ] ; then
exit_failure_syntax "text argument missing for --body option"
fi
url_encode "$1"
options="${options}body=${result}&"
shift
;;
--attach)
if [ -z "$1" ] ; then
exit_failure_syntax "file argument missing for --attach option"
fi
check_input_file "$1"
file=`readlink -f "$1"` # Normalize path
if [ -z "$file" ] || [ ! -f "$file" ] ; then
exit_failure_file_missing "file '$1' does not exist"
fi
url_encode "$file"
options="${options}attach=${result}&"
shift
;;
-*)
exit_failure_syntax "unexpected option '$parm'"
;;
mailto:*)
mailto="$parm"
;;
*@*)
url_encode "$parm"
if [ -z "${mailto}" ] ; then
mailto="mailto:"${result}"?"
else
options="${options}to=${result}&"
fi
;;
*)
exit_failure_syntax "unexpected argument '$parm'"
;;
esac
done
if [ -z "${mailto}" ] ; then
# TO address is optional
mailto="mailto:?"
fi
case $mailto in
*\?)
mailto="${mailto}${options}"
;;
*\?*)
mailto="${mailto}&${options}"
;;
*)
mailto="${mailto}?${options}"
;;
esac
# Strip trailing ? and &
mailto=`echo "${mailto}"| sed 's/[?&]$//'`
# Shouldn't happen
[ x"${mailto}" != x"" ] || exit_failure_syntax
if which xdg-email-hook.sh > /dev/null 2> /dev/null; then
xdg-email-hook.sh "${mailto}"
if [ $? -eq 0 ]; then
exit_success
else
exit_failure_operation_failed
fi
fi
detectDE
if [ x"$DE" = x"" ]; then
DE=generic
fi
if [ "$DE" = generic ] && [ -z "$MAILER" ] && \
( [ -r ~/.muttrc ] || [ -r ~/.mutt/muttrc ] ) && \
which mutt >/dev/null 2>&1; then
if [ -n "$DISPLAY" ]; then
MAILER="x-terminal-emulator -e mutt"
else
MAILER=mutt
fi
fi
if [ x"$MAILER" != x"" ]; then
DE=envvar
fi
# if BROWSER variable is not set, check some well known browsers instead
if [ x"$BROWSER" = x"" ]; then
BROWSER=www-browser:links2:elinks:links:lynx:w3m
if [ -n "$DISPLAY" ]; then
BROWSER=x-www-browser:firefox:iceweasel:seamonkey:mozilla:epiphany:konqueror:chromium-browser:google-chrome:$BROWSER
fi
fi
case "$DE" in
envvar)
open_envvar "${mailto}"
;;
kde)
open_kde "${mailto}"
;;
gnome)
open_gnome "${mailto}"
;;
gnome3|cinnamon|lxde|mate)
open_gnome3 "${mailto}"
;;
xfce)
open_xfce "${mailto}"
;;
lxde)
open_lxde "${mailto}"
;;
generic)
open_generic "${mailto}"
;;
*)
exit_failure_operation_impossible "no method available for opening '${mailto}'"
;;
esac
|