libreoffice-help-en-us 1:5.1.2-0ubuntu1 / usr / share / libreoffice / help / en-US / schart.ht

20 CHART2_HID_SCH_DATA_SERIES_LABEL 20 Enter names for the data series.
34 modules%2Fschart%2Fui%2Fchartdatadialog%2FSwapColumn 3b Switches the current column with its neighbor at the right.
36 modules%2Fschart%2Fui%2Fchartdatadialog%2FRemoveColumn 5e Deletes the current series or text column. It is not possible to delete the first text column.
33 modules%2Fschart%2Fui%2Fchartdatadialog%2FRemoveRow 44 Deletes the current row. It is not possible to delete the label row.
12 .uno%3ADiagramData 3e Opens the Data Table dialog where you can edit the chart data.
31 modules%2Fschart%2Fui%2Fchartdatadialog%2FSwapRow 31 Switches the current row with its neighbor below.
36 modules%2Fschart%2Fui%2Fchartdatadialog%2FInsertColumn 33 Inserts a new data series after the current column.
3a modules%2Fschart%2Fui%2Fchartdatadialog%2FInsertTextColumn 56 Inserts a new text column after the current column for hierarchical axes descriptions.
33 modules%2Fschart%2Fui%2Fchartdatadialog%2FInsertRow 28 Inserts a new row below the current row.
16 .uno%3AToggleAxisTitle 4e Click Axes Title On/Off on the Formatting bar to show or hide the axis labels.
23 SCH%3AEDIT%3ADLG_TITLE%3AEDT_Z_AXIS 6e Marking the Z axis option activates the Z axis title. Enter the desired title in the corresponding text field.
23 SCH%3AEDIT%3ADLG_TITLE%3AEDT_Y_AXIS 6e Marking the Y axis option activates the Y axis title. Enter the desired title in the corresponding text field.
23 SCH%3AEDIT%3ADLG_TITLE%3AEDT_X_AXIS 6e Marking the X axis option activates the X axis title. Enter the desired title in the corresponding text field.
17 .uno%3AInsertMenuTitles 38 Opens a dialog to enter or modify the titles in a chart.
26 SCH%3AEDIT%3ADLG_TITLE%3AEDT_MAINTITLE 70 Marking the Main Title option activates the main title. Enter the desired title in the corresponding text field.
12 .uno%3AToggleTitle 50 Click Title On/Off on the Formatting bar to show or hide the title and subtitle.
25 SCH%3AEDIT%3ADLG_TITLE%3AEDT_SUBTITLE 6c Marking the Subtitle option activates the subtitle. Enter the desired title in the corresponding text field.
32 modules%2Fschart%2Fui%2Ftp_LegendPosition%2Fbottom 30 Positions the legend at the bottom of the chart.
31 modules%2Fschart%2Fui%2Ftp_LegendPosition%2Fright 2f Positions the legend at the right of the chart.
3d modules%2Fschart%2Fui%2Ftp_LegendPosition%2FLB_LEGEND_TEXTDIR 99 Specify the text direction for a paragraph that uses complex text layout (CTL). This feature is only available if complex text layout support is enabled.
17 .uno%3AInsertMenuLegend 89 Opens the Legend dialog, which allows you to change the position of legends in the chart, and to specify whether the legend is displayed.
13 .uno%3AToggleLegend 44 To show or hide a legend, click Legend On/Off on the Formatting bar.
2e modules%2Fschart%2Fui%2Fwizelementspage%2Fshow 34 Specifies whether to display a legend for the chart.
2f modules%2Fschart%2Fui%2Ftp_LegendPosition%2Ftop 2d Positions the legend at the top of the chart.
30 modules%2Fschart%2Fui%2Ftp_LegendPosition%2Fleft 2e Positions the legend at the left of the chart.
38 modules%2Fschart%2Fui%2Fdlg_DataLabel%2FNF_LABEL_DEGREES 3e Enter the counterclockwise rotation angle for the data labels.
38 modules%2Fschart%2Fui%2Fdlg_DataLabel%2FLB_LABEL_TEXTDIR 99 Specify the text direction for a paragraph that uses complex text layout (CTL). This feature is only available if complex text layout support is enabled.
37 modules%2Fschart%2Fui%2Ftp_DataLabel%2FLB_LABEL_TEXTDIR 99 Specify the text direction for a paragraph that uses complex text layout (CTL). This feature is only available if complex text layout support is enabled.
36 modules%2Fschart%2Fui%2Ftp_DataLabel%2FPB_NUMBERFORMAT 2b Opens a dialog to select the number format.
37 modules%2Fschart%2Fui%2Ftp_DataLabel%2FNF_LABEL_DEGREES 3e Enter the counterclockwise rotation angle for the data labels.
2f modules%2Fschart%2Fui%2Fdlg_DataLabel%2FCT_DIAL 42 Click in the dial to set the text orientation for the data labels.
3e modules%2Fschart%2Fui%2Ftp_DataLabel%2FPB_PERCENT_NUMBERFORMAT 2f Opens a dialog to select the percentage format.
39 modules%2Fschart%2Fui%2Fdlg_DataLabel%2FLB_TEXT_SEPARATOR 48 Selects the separator between multiple text strings for the same object.
38 modules%2Fschart%2Fui%2Ftp_DataLabel%2FLB_TEXT_SEPARATOR 48 Selects the separator between multiple text strings for the same object.
37 modules%2Fschart%2Fui%2Fdlg_DataLabel%2FPB_NUMBERFORMAT 2b Opens a dialog to select the number format.
3d %2Fmodules%2Fschart%2Fui%2Fdlg_DataLabel%2FLB_LABEL_PLACEMENT 3d Selects the placement of data labels relative to the objects.
32 modules%2Fschart%2Fui%2Ftp_DataLabel%2FCB_CATEGORY 21 Shows the data point text labels.
3d modules%2Fschart%2Fui%2Ftp_DataLabel%2FCB_VALUE_AS_PERCENTAGE 3a Displays the percentage of the data points in each column.
39 modules%2Fschart%2Fui%2Ftp_DataLabel%2FCB_VALUE_AS_NUMBER 30 Displays the absolute values of the data points.
39 modules%2Fschart%2Fui%2Ftp_DataLabel%2FLB_LABEL_PLACEMENT 3d Selects the placement of data labels relative to the objects.
1b .uno%3AInsertMenuDataLabels 47 Opens the Data Labels dialog, which enables you to set the data labels.
2e modules%2Fschart%2Fui%2Ftp_DataLabel%2FCT_DIAL 42 Click in the dial to set the text orientation for the data labels.
3f modules%2Fschart%2Fui%2Fdlg_DataLabel%2FPB_PERCENT_NUMBERFORMAT 2f Opens a dialog to select the percentage format.
30 modules%2Fschart%2Fui%2Ftp_DataLabel%2FCB_SYMBOL 38 Displays the legend icons next to each data point label.
32 modules%2Fschart%2Fui%2Finsertaxisdlg%2FsecondaryY 87 The major axis and the secondary axis can have different scaling. For example, you can scale one axis to 2 in. and the other to 1.5 in.
32 modules%2Fschart%2Fui%2Finsertaxisdlg%2FsecondaryX 29 Displays a secondary X axis in the chart.
15 .uno%3AInsertMenuAxes 30 Specifies the axes to be displayed in the chart.
30 modules%2Fschart%2Fui%2Finsertaxisdlg%2FprimaryY 30 Displays the Y axis as a line with subdivisions.
30 modules%2Fschart%2Fui%2Finsertaxisdlg%2FprimaryZ 30 Displays the Z axis as a line with subdivisions.
30 modules%2Fschart%2Fui%2Finsertaxisdlg%2FprimaryX 30 Displays the X axis as a line with subdivisions.
32 modules%2Fschart%2Fui%2Ftp_ErrorBars%2FRB_NEGATIVE 1f Shows only negative error bars.
32 modules%2Fschart%2Fui%2Ftp_ErrorBars%2FRB_POSITIVE 1f Shows only positive error bars.
2e modules%2Fschart%2Fui%2Ftp_ErrorBars%2FRB_BOTH 27 Shows positive and negative error bars.
32 modules%2Fschart%2Fui%2Ftp_ErrorBars%2FLB_FUNCTION 2e Select a function to calculate the error bars.
33 modules%2Fschart%2Fui%2Ftp_ErrorBars%2Ftp_ErrorBars 45 Use the X or Y Error Bars dialog to display error bars for 2D charts.
41 modules%2Fschart%2Fui%2Fdlg_InsertErrorBars%2Fdlg_InsertErrorBars 45 Use the X or Y Error Bars dialog to display error bars for 2D charts.
39 modules%2Fschart%2Fui%2Fdlg_InsertErrorBars%2FRB_NEGATIVE 1f Shows only negative error bars.
31 modules%2Fschart%2Fui%2Ftp_ErrorBars%2FRB_PERCENT 75 Displays a percentage. The display refers to the corresponding data point. Set the percentage in the Parameters area.
39 modules%2Fschart%2Fui%2Fdlg_InsertErrorBars%2FRB_POSITIVE 1f Shows only positive error bars.
2e modules%2Fschart%2Fui%2Ftp_ErrorBars%2FRB_NONE 1d Does not show any error bars.
39 modules%2Fschart%2Fui%2Fdlg_InsertErrorBars%2FRB_FUNCTION 2e Select a function to calculate the error bars.
35 modules%2Fschart%2Fui%2Fdlg_InsertErrorBars%2FRB_BOTH 27 Shows positive and negative error bars.
1b .uno%3AInsertMenuYErrorBars 45 Use the X or Y Error Bars dialog to display error bars for 2D charts.
2f modules%2Fschart%2Fui%2Ftp_ErrorBars%2FRB_CONST 41 Displays constant values that you specify in the Parameters area.
32 modules%2Fschart%2Fui%2Ftp_ErrorBars%2FRB_FUNCTION 2e Select a function to calculate the error bars.
39 modules%2Fschart%2Fui%2Fdlg_InsertErrorBars%2FLB_FUNCTION 2e Select a function to calculate the error bars.
1e .uno%3AInsertTrendlineEquation 91 To show the trend line equation, select the trend line in the chart, right-click to open the context menu, and choose Insert Trend Line Equation.
1b .uno%3AInsertMenuMeanValues 8c Mean Value Lines are special trend lines that show the mean value. Use Insert - Mean Value Lines to insert mean value lines for data series.
41 modules%2Fschart%2Fui%2Ftp_Trendline%2FshowCorrelationCoefficient 3e Shows the coefficient of determination next to the trend line.
33 modules%2Fschart%2Fui%2Ftp_Trendline%2FshowEquation 35 Shows the trend line equation next to the trend line.
32 modules%2Fschart%2Fui%2Ftp_Trendline%2Fexponential 23 An exponential trend line is shown.
2c modules%2Fschart%2Fui%2Ftp_Trendline%2Fpower 1c A power trend line is shown.
33 modules%2Fschart%2Fui%2Ftp_Trendline%2FTP_TRENDLINE 4f Trend lines can be added to all 2D chart types except for Pie and Stock charts.
2d modules%2Fschart%2Fui%2Ftp_Trendline%2Flinear 1d A linear trend line is shown.
1b .uno%3AInsertMenuTrendlines 4f Trend lines can be added to all 2D chart types except for Pie and Stock charts.
32 modules%2Fschart%2Fui%2Ftp_Trendline%2Flogarithmic 22 A logarithmic trend line is shown.
38 modules%2Fschart%2Fui%2Ftp_SeriesToAxis%2FRB_ASSUME_ZERO 60 For a missing value, the y-value will be shown as zero. This is the default for chart type Area.
3a modules%2Fschart%2Fui%2Ftp_SeriesToAxis%2FRB_CONTINUE_LINE 75 For a missing value, the interpolation from the neighbor values will be shown. This is the default for chart type XY.
38 modules%2Fschart%2Fui%2Ftp_SeriesToAxis%2FRBT_OPT_AXIS_2 89 Changes the scaling of the Y axis. This axis is only visible when at least one data series is assigned to it and the axis view is active.
34 modules%2Fschart%2Fui%2Ftp_SeriesToAxis%2FMT_OVERLAP 3b Defines the necessary settings for overlapping data series.
41 modules%2Fschart%2Fui%2Ftp_SeriesToAxis%2FCB_INCLUDE_HIDDEN_CELLS 51 Check to also show values of currently hidden cells within the source cell range.
37 modules%2Fschart%2Fui%2Ftp_SeriesToAxis%2FRB_DONT_PAINT 67 For a missing value, no data will be shown. This is the default for chart types Column, Bar, Line, Net.
38 modules%2Fschart%2Fui%2Ftp_SeriesToAxis%2FRBT_OPT_AXIS_1 54 This option is active as default. All data series are aligned to the primary Y axis.
3b modules%2Fschart%2Fui%2Ftp_PolarOptions%2FNF_STARTING_ANGLE 70 Enter the starting angle between 0 and 359 degrees. You can also click the arrows to change the displayed value.
36 modules%2Fschart%2Fui%2Ftp_SeriesToAxis%2FCB_CONNECTOR 8b For "stacked" and "percent" column (vertical bar) charts, mark this check box to connect the column layers that belong together with lines.
3e modules%2Fschart%2Fui%2Ftp_SeriesToAxis%2FCB_BARS_SIDE_BY_SIDE 58 The bars from different data series are shown as if they were attached only to one axis.
30 modules%2Fschart%2Fui%2Ftp_SeriesToAxis%2FMT_GAP 33 Defines the spacing between the columns in percent.
36 modules%2Fschart%2Fui%2Ftp_PolarOptions%2FCB_CLOCKWISE ab The default direction in which the pieces of a pie chart are ordered is counterclockwise. Enable the Clockwise direction checkbox to draw the pieces in opposite direction.
37 modules%2Fschart%2Fui%2Ftp_PolarOptions%2FCT_ANGLE_DIAL 151 Drag the small dot along the circle or click any position on the circle to set the starting angle of a pie or donut chart. The starting angle is the mathematical angle position where the first piece is drawn. The value of 90 degrees draws the first piece at the 12 o'clock position. A value of 0 degrees starts at the 3 o'clock position.
16 .uno%3AInsertMenuGrids ad You can divide the axes into sections by assigning gridlines to them. This allows you to get a better overview of the chart, especially if you are working with large charts.
32 modules%2Fschart%2Fui%2Finsertgriddlg%2FsecondaryZ 3f Adds gridlines that subdivide the Z axis into smaller sections.
32 modules%2Fschart%2Fui%2Finsertgriddlg%2FsecondaryY 3f Adds gridlines that subdivide the Y axis into smaller sections.
32 modules%2Fschart%2Fui%2Finsertgriddlg%2FsecondaryX 3f Adds gridlines that subdivide the X axis into smaller sections.
38 modules%2Fschart%2Fui%2Finsertgriddlg%2FInsertGridDialog ad You can divide the axes into sections by assigning gridlines to them. This allows you to get a better overview of the chart, especially if you are working with large charts.
30 modules%2Fschart%2Fui%2Finsertgriddlg%2FprimaryZ 2a Adds gridlines to the Z axis of the chart.
30 modules%2Fschart%2Fui%2Finsertgriddlg%2FprimaryY 2a Adds gridlines to the Y axis of the chart.
30 modules%2Fschart%2Fui%2Finsertgriddlg%2FprimaryX 2a Adds gridlines to the X axis of the chart.
1b .uno%3AToggleGridHorizontal 6a The Horizontal Grids icon on the Formatting bar toggles the visibility of the grid display for the Y axis.
19 .uno%3AToggleGridVertical 68 The Vertical Grids icon on the Formatting bar toggles the visibility of the grid display for the X axis.
16 .uno%3AFormatSelection 1c Formats the selected object.
d .uno%3AZTitle 2e Modifies the properties of the selected title.
d .uno%3AYTitle 57 Modifies the properties of the selected title or the properties of all titles together.
38 modules%2Fschart%2Fui%2Ftitlerotationtabpage%2FtextdirLB 99 Specify the text direction for a paragraph that uses complex text layout (CTL). This feature is only available if complex text layout support is enabled.
2b modules%2Fschart%2Fui%2Ftp_axisLabel%2Fauto 2b Automatically arranges numbers on the axis.
37 modules%2Fschart%2Fui%2Ftitlerotationtabpage%2FdialCtrl 45 Clicking anywhere on the wheel defines the variable text orientation.
3b modules%2Fschart%2Fui%2Ftitlerotationtabpage%2FOrientDegree 33 Allows you to manually enter the orientation angle.
30 modules%2Fschart%2Fui%2Ftp_axisLabel%2FtextdirLB 99 Specify the text direction for a paragraph that uses complex text layout (CTL). This feature is only available if complex text layout support is enabled.
2e modules%2Fschart%2Fui%2Ftp_axisLabel%2FbreakCB 14 Allows a text break.
2a modules%2Fschart%2Fui%2Ftp_axisLabel%2Fodd 42 Staggers numbers on the axis, even numbers lower than odd numbers.
16 .uno%3AToggleAxisDescr 2c Defines the text direction of cell contents.
33 modules%2Fschart%2Fui%2Ftp_axisLabel%2FshowlabelsCB 32 Specifies whether to show or hide the axis labels.
38 modules%2Fschart%2Fui%2Ftitlerotationtabpage%2FstackedCB 34 Assigns vertical text orientation for cell contents.
30 modules%2Fschart%2Fui%2Ftp_axisLabel%2FoverlapCB 39 Specifies that the text in cells may overlap other cells.
2b modules%2Fschart%2Fui%2Ftp_axisLabel%2Ftile 2a Arranges numbers on the axis side by side.
2b modules%2Fschart%2Fui%2Ftp_axisLabel%2Feven 41 Stagger numbers on the axes, odd numbers lower than even numbers.
d .uno%3ALegend 3f Defines the border, area and character attributes for a legend.
13 .uno%3ADiagramAxisB 8f Opens a dialog where you can edit the properties of the secondary Y axis. To insert a secondary Y axis, choose Insert - Axes and select Y axis.
13 .uno%3ADiagramAxisA 8f Opens a dialog where you can edit the properties of the secondary X axis. To insert a secondary X axis, choose Insert - Axes and select X axis.
15 .uno%3ADiagramAxisAll 47 Opens a dialog, where you can edit the properties of the selected axis.
13 .uno%3ADiagramAxisY 3c Opens the Y Axis dialog, to change properties of the Y axis.
34 modules%2Fschart%2Fui%2Ftp_Scale%2FLB_HELP_TIME_UNIT 4d Minor interval can be set to show a certain number of days, months, or years.
34 modules%2Fschart%2Fui%2Ftp_Scale%2FMT_MAIN_DATE_STEP 4d Major interval can be set to show a certain number of days, months, or years.
30 modules%2Fschart%2Fui%2Ftp_Scale%2FEDT_STEP_MAIN 37 Defines the interval for the main division of the axes.
2e modules%2Fschart%2Fui%2Ftp_Scale%2FMT_STEPHELP 35 Defines the interval for the subdivision of the axes.
34 modules%2Fschart%2Fui%2Ftp_Scale%2FLB_MAIN_TIME_UNIT 4d Major interval can be set to show a certain number of days, months, or years.
30 modules%2Fschart%2Fui%2Ftp_Scale%2FCBX_LOGARITHM 42 Specifies that you want the axis to be subdivided logarithmically.
2a modules%2Fschart%2Fui%2Ftp_Scale%2FEDT_MAX 32 Defines the maximum value for the end of the axis.
2a modules%2Fschart%2Fui%2Ftp_Scale%2FEDT_MIN 38 Defines the minimum value for the beginning of the axis.
2d modules%2Fschart%2Fui%2Ftp_Scale%2FEDT_ORIGIN 41 Specifies at which position to display the values along the axis.
2e modules%2Fschart%2Fui%2Ftp_Scale%2FCBX_REVERSE 81 Defines where the lower and where the higher values are displayed at the axis. The unchecked state is the mathematical direction.
35 modules%2Fschart%2Fui%2Ftp_Scale%2FLB_TIME_RESOLUTION 47 Resolution can be set to show days, months, or years as interval steps.
32 modules%2Fschart%2Fui%2Ftp_Scale%2FCBX_AUTO_ORIGIN 4b You must first deselect the Automatic option in order to modify the values.
2f modules%2Fschart%2Fui%2Ftp_Scale%2FLB_AXIS_TYPE 6e For some types of axes, you can select to format an axis as text or date, or to detect the type automatically.
39 modules%2Fschart%2Fui%2Ftp_AxisPositions%2FLB_PLACE_TICKS 4b Select where to place the marks: at labels, at axis, or at axis and labels.
39 modules%2Fschart%2Fui%2Ftp_AxisPositions%2FCB_MINOR_OUTER 4d Specifies that minor interval marks are placed on the outer side of the axis.
39 modules%2Fschart%2Fui%2Ftp_AxisPositions%2FCB_MINOR_INNER 4d Specifies that minor interval marks are placed on the inner side of the axis.
39 modules%2Fschart%2Fui%2Ftp_AxisPositions%2FCB_TICKS_INNER 3e Specifies that marks are placed on the inner side of the axis.
39 modules%2Fschart%2Fui%2Ftp_AxisPositions%2FCB_TICKS_OUTER 3e Specifies that marks are placed on the outer side of the axis.
43 modules%2Fschart%2Fui%2Ftp_AxisPositions%2FLB_CROSSES_OTHER_AXIS_AT 5f Select where to cross the other axis: at start, at end, at a specified value, or at a category.
44 modules%2Fschart%2Fui%2Ftp_AxisPositions%2FEDT_CROSSES_OTHER_AXIS_AT 40 Enter the value where the axis line should cross the other axis.
4d modules%2Fschart%2Fui%2Ftp_AxisPositions%2FEDT_CROSSES_OTHER_AXIS_AT_CATEGORY 44 Select the category where the axis line should cross the other axis.
3a modules%2Fschart%2Fui%2Ftp_AxisPositions%2FLB_PLACE_LABELS 63 Select where to place the labels: near axis, near axis (other side), outside start, or outside end.
15 .uno%3ADiagramGridAll 33 Opens the Grid dialog for defining grid properties.
12 .uno%3ADiagramWall a2 Opens the Chart Wall dialog, where you can modify the properties of the chart wall. The chart wall is the "vertical" background behind the data area of the chart.
13 .uno%3ADiagramFloor b4 Opens the Chart Floor dialog, where you can modify the properties of the chart floor. The chart floor is the lower area in 3D charts. This function is only available for 3D charts.
12 .uno%3ADiagramArea 96 Opens the Chart Area dialog, where you can modify the properties of the chart area. The chart area is the background behind all elements of the chart.
f .uno%3ABackward 36 Sends the selected data series backward (to the left).
e .uno%3AForward 37 Brings the selected data series forward (to the right).
3e modules%2Fschart%2Fui%2Fsmoothlinesdlg%2FPolynomialsSpinButton 22 Set the degree of the polynomials.
3d modules%2Fschart%2Fui%2Fsmoothlinesdlg%2FResolutionSpinbutton 13 Set the resolution.
3b modules%2Fschart%2Fui%2Fsmoothlinesdlg%2FSplineTypeComboBox 19 Apply a line curve model.
3a modules%2Fschart%2Fui%2Fsmoothlinesdlg%2FSmoothLinesDialog 19 Apply a line curve model.
3a modules%2Fschart%2Fui%2Fsteppedlinesdlg%2Fstep_center_y_rb 7f Start to step up vertically to the middle of the Y values, draw a horizontal line and finish by stepping vertically to the end.
35 modules%2Fschart%2Fui%2Fsteppedlinesdlg%2Fstep_end_rb 6a Start with horizontal line, step up vertically in the middle of the X values and end with horizontal line.
3a modules%2Fschart%2Fui%2Fsteppedlinesdlg%2Fstep_center_x_rb 39 Start to step up vertically and end with horizontal line.
37 modules%2Fschart%2Fui%2Fsteppedlinesdlg%2Fstep_start_rb 3d Start with horizontal line and step up vertically at the end.
39 modules%2Fschart%2Fui%2Ftp_3D_SceneAppearance%2FLB_SCHEME 49 Select a scheme from the list box, or click any of the check boxes below.
3d schart%2Fui%2Ftp_3D_SceneIllumination%2FBTN_LIGHTSOURCE_COLOR 26 Select a color using the color dialog.
3d modules%2Fschart%2Fui%2Ftp_3D_SceneGeometry%2FCBX_PERSPECTIVE bc Mark the Perspective box to view the chart as through a camera lens. Use the spin button to set the percentage. With a high percentage nearer objects look bigger than more distant objects.
d .uno%3AView3D 9f Opens a dialog to edit the properties of a three dimensional view for Column, Bar, Pie, and Area charts. For Line and XY (Scatter) charts you can see 3D lines.
3a modules%2Fschart%2Fui%2Ftp_3D_SceneAppearance%2FCB_SHADING 3f Applies Gouraud shading if marked, or flat shading if unmarked.
41 modules%2Fschart%2Fui%2Ftp_3D_SceneGeometry%2FMTR_FLD_PERSPECTIVE bc Mark the Perspective box to view the chart as through a camera lens. Use the spin button to set the percentage. With a high percentage nearer objects look bigger than more distant objects.
43 modules%2Fschart%2Fui%2Ftp_3D_SceneGeometry%2FCBX_RIGHT_ANGLED_AXES 101 If Right-angled axes is enabled, you can rotate the chart contents only in X and Y direction, that is, parallel to the chart borders. Right-angled axes is enabled by default for newly created 3D charts. Pie and Donut charts do not support right-angled axes.
43 modules%2Fschart%2Fui%2Ftp_3D_SceneIllumination%2FBTN_AMBIENT_COLOR 26 Select a color using the color dialog.
40 modules%2Fschart%2Fui%2Ftp_3D_SceneGeometry%2FMTR_FLD_Z_ROTATION 57 Sets the rotation of the chart on the z axis. The preview responds to the new settings.
3e modules%2Fschart%2Fui%2Ftp_3D_SceneAppearance%2FCB_OBJECTLINES 42 Shows borders around the areas by setting the line style to Solid.
40 modules%2Fschart%2Fui%2Ftp_3D_SceneGeometry%2FMTR_FLD_X_ROTATION 57 Sets the rotation of the chart on the x axis. The preview responds to the new settings.
40 modules%2Fschart%2Fui%2Ftp_3D_SceneGeometry%2FMTR_FLD_Y_ROTATION 57 Sets the rotation of the chart on the y axis. The preview responds to the new settings.
3d modules%2Fschart%2Fui%2Ftp_3D_SceneIllumination%2FBTN_LIGHT_3 34 Click to enable or disable the uniform light source.
3e modules%2Fschart%2Fui%2Ftp_3D_SceneAppearance%2FCB_ROUNDEDEDGE 18 Edges are rounded by 5%.
49 modules%2Fschart%2Fui%2Ftp_3D_SceneIllumination%2Ftp_3D_SceneIllumination 5c Drag the right slider to set the vertical height and direction of the selected light source.
41 modules%2Fschart%2Fui%2Ftp_3D_SceneIllumination%2FLB_AMBIENTLIGHT 25 Select a color for the ambient light.
3d modules%2Fschart%2Fui%2Ftp_3D_SceneIllumination%2FBTN_LIGHT_1 45 Click to enable or disable the specular light source with highlights.
3d modules%2Fschart%2Fui%2Ftp_3D_SceneIllumination%2FBTN_LIGHT_6 34 Click to enable or disable the uniform light source.
3d modules%2Fschart%2Fui%2Ftp_3D_SceneIllumination%2FBTN_LIGHT_2 34 Click to enable or disable the uniform light source.
3d modules%2Fschart%2Fui%2Ftp_3D_SceneIllumination%2FBTN_LIGHT_5 34 Click to enable or disable the uniform light source.
3d modules%2Fschart%2Fui%2Ftp_3D_SceneIllumination%2FBTN_LIGHT_4 34 Click to enable or disable the uniform light source.
3d modules%2Fschart%2Fui%2Ftp_3D_SceneIllumination%2FBTN_LIGHT_7 34 Click to enable or disable the uniform light source.
3d modules%2Fschart%2Fui%2Ftp_3D_SceneIllumination%2FBTN_LIGHT_8 34 Click to enable or disable the uniform light source.
40 modules%2Fschart%2Fui%2Ftp_3D_SceneIllumination%2FLB_LIGHTSOURCE 2d Select a color for the selected light source.
38 modules%2Fschart%2Fui%2Fwizelementspage%2FsecondaryXaxis 71 Enter a label for the secondary y-axis. This option is only available for charts that support a secondary y-axis.
36 modules%2Fschart%2Fui%2Fwizelementspage%2FprimaryYaxis 28 Enter a label for the y-axis (vertical).
2e modules%2Fschart%2Fui%2Fwizelementspage%2Fshow 20 Displays a legend in your chart.
2b modules%2Fschart%2Fui%2Fwizelementspage%2Fz 75 Displays grid lines that are perpendicular to the z-axis. This option is only available for three-dimensional charts.
36 modules%2Fschart%2Fui%2Fwizelementspage%2FprimaryXaxis 2a Enter a label for the x-axis (horizontal).
33 modules%2Fschart%2Fui%2Fwizelementspage%2Fmaintitle 1d Enter a title for your chart.
2b modules%2Fschart%2Fui%2Fwizelementspage%2Fy 39 Displays grid lines that are perpendicular to the y-axis.
32 modules%2Fschart%2Fui%2Fwizelementspage%2Fsubtitle 20 Enter a subtitle for your chart.
36 modules%2Fschart%2Fui%2Fwizelementspage%2FprimaryZaxis 59 Enter a label for the z-axis. This option is only available for three-dimensional charts.
2d modules%2Fschart%2Fui%2Fwizelementspage%2Ftop 2d Positions the legend to the top of the chart.
2f modules%2Fschart%2Fui%2Fwizelementspage%2Fright 2f Positions the legend to the right of the chart.
2b modules%2Fschart%2Fui%2Fwizelementspage%2Fx 39 Displays grid lines that are perpendicular to the x-axis.
2e modules%2Fschart%2Fui%2Fwizelementspage%2Fleft 2e Positions the legend to the left of the chart.
30 modules%2Fschart%2Fui%2Fwizelementspage%2Fbottom 30 Positions the legend to the bottom of the chart.
2e modules%2Fschart%2Fui%2Ftp_ChartType%2Fnolines 3b Set the number of lines for the Column and Line chart type.
2b modules%2Fschart%2Fui%2Ftp_ChartType%2Fsort 6a Connects points by ascending X values, even if the order of values is different, in an XY scatter diagram.
12 .uno%3ADiagramType 1c Opens the Chart Type dialog.
2e modules%2Fschart%2Fui%2Ftp_ChartType%2Fsubtype 2a Select a sub type of the basic chart type.
31 modules%2Fschart%2Fui%2Ftp_ChartType%2Fproperties 33 Opens a dialog to set the line or curve properties.
30 modules%2Fschart%2Fui%2Ftp_ChartType%2Fcharttype 1a Select a basic chart type.
2f modules%2Fschart%2Fui%2Ftp_ChartType%2F3dscheme 1b Select the type of 3D look.
2c modules%2Fschart%2Fui%2Ftp_ChartType%2Fontop 31 Stack series display values on top of each other.
33 modules%2Fschart%2Fui%2Ftp_ChartType%2Ftp_ChartType 25 Click to go to the named wizard page.
2d modules%2Fschart%2Fui%2Ftp_ChartType%2F3dlook 26 Enables a 3D look for the data values.
1d CHART2_HID_SCH_WIZARD_ROADMAP 25 Click to go to the named wizard page.
2c modules%2Fschart%2Fui%2Ftp_ChartType%2Fshape 1d Select a shape from the list.
2f modules%2Fschart%2Fui%2Ftp_ChartType%2Flinetype 20 Choose the type of line to draw.
2c modules%2Fschart%2Fui%2Ftp_ChartType%2Fstack 28 Displays stacked series for Line charts.
2e modules%2Fschart%2Fui%2Ftp_ChartType%2Fpercent 27 Stack series display values as percent.
3f modules%2Fschart%2Fui%2Ftp_RangeChooser%2FCB_FIRST_ROW_ASLABELS 10d For data series in columns: The first row in the range is used as names for data series. For data series in rows: The first row in the range is used as categories. The remaining rows comprise the data series. If this check box is not selected, all rows are data series.
11 .uno%3ADataRanges 4b Opens the Data Ranges dialog where you can edit Data Range and Data Series.
42 modules%2Fschart%2Fui%2Ftp_RangeChooser%2FCB_FIRST_COLUMN_ASLABELS 11b For data series in columns: The first column in the range is used as names for data series. For data series in rows: The first column in the range is used as categories. The remaining columns comprise the data columns. If this check box is not selected, all columns are data columns.
32 modules%2Fschart%2Fui%2Ftp_RangeChooser%2FED_RANGE a1 Enter the data range that you want to include in your chart. To minimize this dialog while you select the data range in Calc, click the Select data range button.
32 modules%2Fschart%2Fui%2Ftp_RangeChooser%2FIB_RANGE a1 Enter the data range that you want to include in your chart. To minimize this dialog while you select the data range in Calc, click the Select data range button.
35 modules%2Fschart%2Fui%2Ftp_RangeChooser%2FRB_DATACOLS dc Data series get their data from consecutive columns in the selected range. For scatter charts, the first data column will contain x-values for all series. All other data columns are used as y-values, one for each series.
35 modules%2Fschart%2Fui%2Ftp_RangeChooser%2FRB_DATAROWS d8 Data series get their data from consecutive rows in the selected range. For scatter charts, the first data series will contain x-values for all series. All other data series are used as y-values, one for each series.
30 modules%2Fschart%2Fui%2Ftp_DataSource%2FBTN_DOWN 36 Moves down the selected entry in the Data Series list.
31 modules%2Fschart%2Fui%2Ftp_DataSource%2FEDT_RANGE ff Shows the source range address from the second column of the Data Range list box. You can change the range in the text box or by dragging in the document. To minimize this dialog while you select the data range in Calc, click the Select data range button.
35 modules%2Fschart%2Fui%2Ftp_DataSource%2Ftp_DataSource a8 Shows a list of all data series in the chart. Click an entry to view and edit that data series. Click Add to insert a new series into the list after the selected entry.
2f modules%2Fschart%2Fui%2Ftp_DataSource%2FLB_ROLE a1 Shows all the data ranges used by the data series that is selected in the Data Series list box. Each data range shows the role name and the source range address.
31 modules%2Fschart%2Fui%2Ftp_DataSource%2FLB_SERIES a8 Shows a list of all data series in the chart. Click an entry to view and edit that data series. Click Add to insert a new series into the list after the selected entry.
36 modules%2Fschart%2Fui%2Ftp_DataSource%2FEDT_CATEGORIES 144 Shows the source range address of the categories (the texts you can see on the x-axis of a category chart). For an XY-chart, the text box contains the source range of the data labels which are displayed for the data points. To minimize this dialog while you select the data range in Calc, click the Select data range button.
2e modules%2Fschart%2Fui%2Ftp_DataSource%2FBTN_UP 34 Moves up the selected entry in the Data Series list.
35 modules%2Fschart%2Fui%2Ftp_DataSource%2FIMB_RANGE_CAT 144 Shows the source range address of the categories (the texts you can see on the x-axis of a category chart). For an XY-chart, the text box contains the source range of the data labels which are displayed for the data points. To minimize this dialog while you select the data range in Calc, click the Select data range button.
36 modules%2Fschart%2Fui%2Ftp_DataSource%2FIMB_RANGE_MAIN ff Shows the source range address from the second column of the Data Range list box. You can change the range in the text box or by dragging in the document. To minimize this dialog while you select the data range in Calc, click the Select data range button.
2f modules%2Fschart%2Fui%2Ftp_DataSource%2FBTN_ADD 88 Adds a new entry below the current entry in the Data Series list. If an entry is selected, the new data series gets the same chart type.
32 modules%2Fschart%2Fui%2Ftp_DataSource%2FBTN_REMOVE 35 Removes the selected entry from the Data Series list.
11 .uno%3ADataInRows 2a Changes the arrangement of the chart data.
14 .uno%3ADataInColumns 2a Changes the arrangement of the chart data.
10 .uno%3AScaleText 45 Rescales the text in the chart when you change the size of the chart.
15 .uno%3ANewArrangement b6 Moves all chart elements to their default positions inside the current chart. This function does not alter the chart type or any other attributes other than the position of elements.
12 .uno%3AContextType 2c Displays the name of the current chart type.
19 .uno%3AResetAllDataPoints 29 Resets all data points to default format.
15 .uno%3AResetDataPoint 31 Resets the selected data point to default format.
17 .uno%3ADeleteYErrorBars 19 Deletes the Y error bars.
14 .uno%3ADeleteR2Value 16 Deletes the R² value.
16 .uno%3ADeleteMeanValue 1c Deletes the mean value line.
17 .uno%3ADeleteDataLabels 18 Deletes all data labels.
16 .uno%3ADeleteDataLabel 20 Deletes the selected data label.
16 .uno%3ADeleteMajorGrid 17 Deletes the major grid.
13 .uno%3ADeleteLegend 19 Deletes the chart legend.
14 .uno%3AInsertR2Value 33 Inserts the coefficient of determination R² value.
17 .uno%3AInsertDataLabels 14 Inserts data labels.
1e .uno%3ADeleteTrendlineEquation 1f Deletes the trendline equation.
16 .uno%3AInsertMajorGrid 15 Inserts a major grid.
16 .uno%3AInsertMinorGrid 15 Inserts a minor grid.
11 .uno%3AInsertAxis 21 Opens a dialog to insert an axis.
17 .uno%3AInsertRemoveAxes 28 Opens a dialog to insert or delete axes.
11 .uno%3ADeleteAxis 1a Deletes the selected axis.
16 .uno%3AInsertAxisTitle 27 Opens a dialog to insert an axis title.
17 .uno%3AFormatDataLabels 18 Formats the data labels.
11 .uno%3AFormatAxis 1a Formats the selected axis.
1e .uno%3AFormatTrendlineEquation 1f Formats the trendline equation.
13 .uno%3AInsertTitles 26 Opens a dialog to insert chart titles.
16 .uno%3AFormatChartArea 17 Formats the chart area.
12 .uno%3AFormatTitle 1b Formats the selected title.
16 .uno%3ADeleteMinorGrid 17 Deletes the minor grid.
13 .uno%3AFormatLegend 19 Formats the chart legend.
18 .uno%3AInsertObjectChart 10b Creates a chart in the current document. To use a continuous range of cells as the data source for your chart, click inside the cell range, and then choose this command. Alternatively, select some cells and choose this command to create a chart of the selected cells.
10 .uno%3ADrawChart 10b Creates a chart in the current document. To use a continuous range of cells as the data source for your chart, click inside the cell range, and then choose this command. Alternatively, select some cells and choose this command to create a chart of the selected cells.
16 .uno%3AStarChartDialog 10b Creates a chart in the current document. To use a continuous range of cells as the data source for your chart, click inside the cell range, and then choose this command. Alternatively, select some cells and choose this command to create a chart of the selected cells.
16 .uno%3AFormatDataPoint 20 Formats the selected data point.
13 SW_HID_INSERT_CHART 10b Creates a chart in the current document. To use a continuous range of cells as the data source for your chart, click inside the cell range, and then choose this command. Alternatively, select some cells and choose this command to create a chart of the selected cells.
16 .uno%3AInsertDataLabel 1c Inserts a single data label.
16 .uno%3AFormatMajorGrid 17 Formats the major grid.
16 .uno%3AFormatMeanValue 1c Formats the mean value line.
17 .uno%3AFormatDataSeries 18 Formats the data series.
16 .uno%3AFormatDataLabel 20 Formats the selected data label.
16 .uno%3AFormatStockLoss 22 Formats the stock loss indicators.
12 .uno%3AFormatFloor 18 Formats the chart floor.
16 .uno%3AFormatMinorGrid 17 Formats the minor grid.
16 .uno%3AFormatStockGain 22 Formats the stock gain indicators.
11 .uno%3AFormatWall 17 Formats the chart wall.
17 .uno%3AFormatYErrorBars 19 Formats the Y error bars.
23 .uno%3AInsertTrendlineEquationAndR2 48 Inserts the trendline equation and the coefficient of determination R².
16 .uno%3AFormatTrendline 16 Formats the trendline.
1b .uno%3AChartElementSelector b9 Select the element from the chart that you want to format. The element gets selected in the chart preview. Click Format Selection to open the properties dialog for the selected element.
17 HID_TABDLG_STANDARD_BTN 66 Click the More button to expand the dialog to show further options. Click again to restore the dialog.
14 HID_TABDLG_RESET_BTN 32 Resets modified values back to the default values.
21 cui%2Fui%2Foptionsdialog%2Frevert 40 Resets modified values back to the $[officename] default values.
1e EXTENSIONS_HID_LISTWIZARD_NEXT 9e Click the Next button, and the wizard uses the current dialog settings and proceeds to the next step. If you are on the last step, this button becomes Create.
11 WIZARDS_HID0_NEXT 9e Click the Next button, and the wizard uses the current dialog settings and proceeds to the next step. If you are on the last step, this button becomes Create.
17 DBACCESS_HID_DBWIZ_NEXT 9e Click the Next button, and the wizard uses the current dialog settings and proceeds to the next step. If you are on the last step, this button becomes Create.
17 SVX_HID_GALLERY_PREVIEW 2c Displays a preview of the current selection.
38 modules%2Fscalc%2Fui%2Fadvancedfilterdialog%2Frbcopyarea f9 Click the Shrink icon to reduce the dialog to the size of the input field. It is then easier to mark the required reference in the sheet. The icons then automatically convert to the Maximize icon. Click it to restore the dialog to its original size.
1b CUI_HID_MEASURE_CTL_PREVIEW 2c Displays a preview of the current selection.
38 modules%2Fscalc%2Fui%2Fstandardfilterdialog%2Frbcopyarea f9 Click the Shrink icon to reduce the dialog to the size of the input field. It is then easier to mark the required reference in the sheet. The icons then automatically convert to the Maximize icon. Click it to restore the dialog to its original size.
3b modules%2Fscalc%2Fui%2Fdefinedatabaserangedialog%2Fassignrb f9 Click the Shrink icon to reduce the dialog to the size of the input field. It is then easier to mark the required reference in the sheet. The icons then automatically convert to the Maximize icon. Click it to restore the dialog to its original size.
39 modules%2Fscalc%2Fui%2Fconditionalformatdialog%2Frbassign f9 Click the Shrink icon to reduce the dialog to the size of the input field. It is then easier to mark the required reference in the sheet. The icons then automatically convert to the Maximize icon. Click it to restore the dialog to its original size.
35 modules%2Fscalc%2Fui%2Fprintareasdialog%2Frbrepeatcol f9 Click the Shrink icon to reduce the dialog to the size of the input field. It is then easier to mark the required reference in the sheet. The icons then automatically convert to the Maximize icon. Click it to restore the dialog to its original size.
1c WIZARDS_HID_DLGTABLE_CMDNEXT 9e Click the Next button, and the wizard uses the current dialog settings and proceeds to the next step. If you are on the last step, this button becomes Create.
35 modules%2Fscalc%2Fui%2Fprintareasdialog%2Frbrepeatrow f9 Click the Shrink icon to reduce the dialog to the size of the input field. It is then easier to mark the required reference in the sheet. The icons then automatically convert to the Maximize icon. Click it to restore the dialog to its original size.
35 modules%2Fscalc%2Fui%2Fprintareasdialog%2Frbprintarea f9 Click the Shrink icon to reduce the dialog to the size of the input field. It is then easier to mark the required reference in the sheet. The icons then automatically convert to the Maximize icon. Click it to restore the dialog to its original size.
1d cui%2Fui%2Fcolorpage%2Fdelete 3c Deletes the selected element or elements after confirmation.
1f EXTENSIONS_HID_GROUPWIZARD_NEXT 9e Click the Next button, and the wizard uses the current dialog settings and proceeds to the next step. If you are on the last step, this button becomes Create.
3a modules%2Fscalc%2Fui%2Fadvancedfilterdialog%2Frbfilterarea f9 Click the Shrink icon to reduce the dialog to the size of the input field. It is then easier to mark the required reference in the sheet. The icons then automatically convert to the Maximize icon. Click it to restore the dialog to its original size.
31 modules%2Fscalc%2Fui%2Fmanagenamesdialog%2Fassign f9 Click the Shrink icon to reduce the dialog to the size of the input field. It is then easier to mark the required reference in the sheet. The icons then automatically convert to the Maximize icon. Click it to restore the dialog to its original size.
31 modules%2Fscalc%2Fui%2Fconsolidatedialog%2Fdelete 48 Deletes the selected element or elements without requiring confirmation.
2c modules%2Fscalc%2Fui%2Foptsortslist%2Fdelete 3c Deletes the selected element or elements after confirmation.
21 WIZARDS_HID_DLGREPORT_0_CMDCANCEL 40 Clicking Cancel closes a dialog without saving any changes made.
39 modules%2Fscalc%2Fui%2Fdefinedatabaserangedialog%2Fdelete 3c Deletes the selected element or elements after confirmation.
42 modules%2Fscalc%2Fui%2Fpivottablelayoutdialog%2Fdestination-button f9 Click the Shrink icon to reduce the dialog to the size of the input field. It is then easier to mark the required reference in the sheet. The icons then automatically convert to the Maximize icon. Click it to restore the dialog to its original size.
32 modules%2Fscalc%2Fui%2Fnamerangesdialog%2Frbassign f9 Click the Shrink icon to reduce the dialog to the size of the input field. It is then easier to mark the required reference in the sheet. The icons then automatically convert to the Maximize icon. Click it to restore the dialog to its original size.
27 cui%2Fui%2Flineendstabpage%2FBTN_DELETE 3c Deletes the selected element or elements after confirmation.
2f modules%2Fscalc%2Fui%2Fautoformattable%2Fremove 3c Deletes the selected element or elements after confirmation.
30 modules%2Fscalc%2Fui%2Fnamerangesdialog%2Fdelete 3c Deletes the selected element or elements after confirmation.
1e WIZARDS_HID_QUERYWIZARD_CREATE 2a Applies all changes and closes the wizard.
23 hid%2Fcui%2Fui%2Fhatchpage%2Fdelete 3c Deletes the selected element or elements after confirmation.
28 cui%2Fui%2Flinestyletabpage%2FBTN_DELETE 3c Deletes the selected element or elements after confirmation.
20 EXTENSIONS_HID_LISTWIZARD_CANCEL 40 Clicking Cancel closes a dialog without saving any changes made.
1c WIZARDS_HID_FAXWIZARD_CANCEL 40 Clicking Cancel closes a dialog without saving any changes made.
21 EXTENSIONS_HID_GROUPWIZARD_CANCEL 40 Clicking Cancel closes a dialog without saving any changes made.
35 modules%2Fscalc%2Fui%2Fconsolidatedialog%2Frbdataarea f9 Click the Shrink icon to reduce the dialog to the size of the input field. It is then easier to mark the required reference in the sheet. The icons then automatically convert to the Maximize icon. Click it to restore the dialog to its original size.
25 cui%2Fui%2Fbitmaptabpage%2FBTN_DELETE 3c Deletes the selected element or elements after confirmation.
1e WIZARDS_HID_DLGTABLE_CMDCANCEL 40 Clicking Cancel closes a dialog without saving any changes made.
1b WIZARDS_HID_DLGFORM_CMDNEXT 9e Click the Next button, and the wizard uses the current dialog settings and proceeds to the next step. If you are on the last step, this button becomes Create.
13 WIZARDS_HID0_CANCEL 40 Clicking Cancel closes a dialog without saving any changes made.
25 cui%2Fui%2Facorexceptpage%2Fdeldouble 48 Deletes the selected element or elements without requiring confirmation.
33 modules%2Fscalc%2Fui%2Fnamerangesdialog%2Frbassign2 f9 Click the Shrink icon to reduce the dialog to the size of the input field. It is then easier to mark the required reference in the sheet. The icons then automatically convert to the Maximize icon. Click it to restore the dialog to its original size.
1d WIZARDS_HID_DLGFORM_CMDCANCEL 40 Clicking Cancel closes a dialog without saving any changes made.
2d modules%2Fsmath%2Fui%2Fcatalogdialog%2Finsert 43 Applies the modified or selected values without closing the dialog.
1a ui%2Fgradientpage%2Fdelete 3c Deletes the selected element or elements after confirmation.
1e WIZARDS_HID_DLGTABLE_CMDFINISH 2a Applies all changes and closes the wizard.
1e WIZARDS_HID_QUERYWIZARD_CANCEL 40 Clicking Cancel closes a dialog without saving any changes made.
27 cui%2Fui%2Fparatabspage%2FbuttonBTN_DEL 3c Deletes the selected element or elements after confirmation.
2a modules%2FBasicIDE%2Fui%2Flibpage%2Fdelete 3c Deletes the selected element or elements after confirmation.
2c modules%2FBasicIDE%2Fui%2Fmacropage%2Fdelete 3c Deletes the selected element or elements after confirmation.
24 cui%2Fui%2Fselectpathdialog%2Fdelete 48 Deletes the selected element or elements without requiring confirmation.
32 modules%2Fscalc%2Fui%2Fgoalseekdlg%2Fformulabutton f9 Click the Shrink icon to reduce the dialog to the size of the input field. It is then easier to mark the required reference in the sheet. The icons then automatically convert to the Maximize icon. Click it to restore the dialog to its original size.
2e modules%2FBasicIDE%2Fui%2Fdialogpage%2Flibrary 3c Deletes the selected element or elements after confirmation.
33 modules%2Fsimpress%2Fui%2Fcustomslideshows%2Fdelete 48 Deletes the selected element or elements without requiring confirmation.
2a sw%3APushButton%3ADLG_BIB_BASE%3APB_DELETE 48 Deletes the selected element or elements without requiring confirmation.
23 cui%2Fui%2Fmultipathdialog%2Fdelete 48 Deletes the selected element or elements without requiring confirmation.
31 modules%2Fscalc%2Fui%2Fmanagenamesdialog%2Fdelete 3c Deletes the selected element or elements after confirmation.
23 cui%2Fui%2Facorreplacepage%2Fdelete 48 Deletes the selected element or elements without requiring confirmation.
21 WIZARDS_HID_DLGIMPORT_0_CMDCANCEL 40 Clicking Cancel closes a dialog without saving any changes made.
3d modules%2Fscalc%2Fui%2Fmultipleoperationsdialog%2Fformulasref f9 Click the Shrink icon to reduce the dialog to the size of the input field. It is then easier to mark the required reference in the sheet. The icons then automatically convert to the Maximize icon. Click it to restore the dialog to its original size.
38 modules%2Fscalc%2Fui%2Fmultipleoperationsdialog%2Frowref f9 Click the Shrink icon to reduce the dialog to the size of the input field. It is then easier to mark the required reference in the sheet. The icons then automatically convert to the Maximize icon. Click it to restore the dialog to its original size.
2e modules%2Fscalc%2Fui%2Fgoalseekdlg%2Fvarbutton f9 Click the Shrink icon to reduce the dialog to the size of the input field. It is then easier to mark the required reference in the sheet. The icons then automatically convert to the Maximize icon. Click it to restore the dialog to its original size.
38 modules%2Fscalc%2Fui%2Fmultipleoperationsdialog%2Fcolref f9 Click the Shrink icon to reduce the dialog to the size of the input field. It is then easier to mark the required reference in the sheet. The icons then automatically convert to the Maximize icon. Click it to restore the dialog to its original size.
1c WIZARDS_HID_QUERYWIZARD_NEXT 9e Click the Next button, and the wizard uses the current dialog settings and proceeds to the next step. If you are on the last step, this button becomes Create.
15 SW_HID_MD_GLOS_DELETE 3c Deletes the selected element or elements after confirmation.
25 cui%2Fui%2Facorexceptpage%2Fdelabbrev 48 Deletes the selected element or elements without requiring confirmation.
35 modules%2Fscalc%2Fui%2Fconsolidatedialog%2Frbdestarea f9 Click the Shrink icon to reduce the dialog to the size of the input field. It is then easier to mark the required reference in the sheet. The icons then automatically convert to the Maximize icon. Click it to restore the dialog to its original size.
1f SID_EXPLORERCONTENT_OPEN_OBJECT 3f Use the Open command to open the selected object in a new task.
19 SID_EXPLORERCONTENT_PASTE 46 Inserts the element that you moved to the clipboard into the document.
18 SID_EXPLORERCONTENT_COPY 2d Copies the selected element to the clipboard.
38 cui%2Fui%2Fgalleryupdateprogress%2FGalleryUpdateProgress 39 Updates the view in the window or in the selected object.
1a SID_EXPLORERCONTENT_RENAME 28 Enables a selected object to be renamed.
19 HID_GALLERY_MN_BACKGROUND 35 Inserts the selected picture as a background graphic.
1b SID_EXPLORERCONTENT_DESTROY 99 Deletes the current selection. If multiple objects are selected, all will be deleted. In most cases, a security query appears before objects are deleted.
17 HID_DID_SAVE_PACKED_XML 50 By default, $[officename] loads and saves files in the OpenDocument file format.
11 .uno%3AActiveHelp 53 Enables the display of a brief description of menus and icons at the mouse pointer.
e .uno%3AHelpTip 4f Enables the display of icon names at the mouse pointer and other Help contents.
23 svt%2Fui%2Fgraphicexport%2Flevel2rb 73 Select the Level 2 option if your output device supports colored bitmaps, palette graphics and compressed graphics.
27 svt%2Fui%2Fgraphicexport%2Fcompressnone 32 Specifies that you do not wish to use compression.
23 svt%2Fui%2Fgraphicexport%2Flevel1rb 8c Compression is not available at this level. Select the Level 1 option if your PostScript printer does not offer the capabilities of Level 2.
28 svt%2Fui%2Fgraphicexport%2Fepsipreviewcb b6 Specifies whether a monochrome preview graphic in EPSI format is exported together with the PostScript file. This format only contains printable characters from the 7-bit ASCII code.
26 svt%2Fui%2Fgraphicexport%2Fcompresslzw 66 LZW compression is the compression of a file into a smaller file using a table-based lookup algorithm.
28 svt%2Fui%2Fgraphicexport%2Ftiffpreviewcb 6a Specifies whether a preview image is exported in the TIFF format together with the actual PostScript file.
2d svt%2Fui%2Fgraphicexport%2Fsavetransparencycb ba Specifies whether to save the background of the picture as transparent. Only objects will be visible in the GIF image. Use the Color Replacer to set the transparent color in the picture.
27 svt%2Fui%2Fgraphicexport%2Finterlacedcb 40 Specifies whether the graphic is to be saved in interlaced mode.
21 svt%2Fui%2Fgraphicexport%2Ftextcb 57 Exports the file in ASCII text format. The resulting file is larger than a binary file.
23 svt%2Fui%2Fgraphicexport%2Fcolor1rb 1a Exports the file in color.
2e svt%2Fui%2Fgraphicexport%2Fresolutionmf-nospin 4b Enter the image resolution. Select the measurement units from the list box.
2a svt%2Fui%2Fgraphicexport%2Fheightmf-nospin 15 Specifies the height.
22 svt%2Fui%2Fgraphicexport%2Fwidthlb 14 Specifies the width.
29 svt%2Fui%2Fgraphicexport%2Fwidthmf-nospin 20 Specifies the measurement units.
27 svt%2Fui%2Fgraphicexport%2Fresolutionlb 4b Enter the image resolution. Select the measurement units from the list box.
27 svt%2Fui%2Fgraphicexport%2Fcolordepthlb 41 Select the color depth from 8 bit grayscale or 24 bit true color.
2b svt%2Fui%2Fgraphicexport%2Fcompressionjpgnf 79 Sets the quality for the export. Choose from a low quality with minimal file size, up to a high quality and big file size
23 svt%2Fui%2Fgraphicexport%2Fcolor2rb 24 Exports the file in grayscale tones.
2b svt%2Fui%2Fgraphicexport%2Fcompressionpngnf 62 Sets the compression for the export. A high compression means a smaller, but slower to load image.
20 svt%2Fui%2Fgraphicexport%2Frlecb 36 Applies RLE (Run Length Encoding) to the BMP graphics.
23 svt%2Fui%2Fgraphicexport%2Fbinarycb 52 Exports the file in binary format. The resulting file is smaller than a text file.
30 modules%2Fscalc%2Fui%2Fimoptdialog%2Fcharsetlist 41 Select the character set from the options used for import/export.
2f modules%2Fscalc%2Fui%2Fimoptdialog%2Ffixedwidth 2b Exports all data fields with a fixed width.
2a modules%2Fscalc%2Fui%2Fimoptdialog%2Ffield 41 Choose or enter the field delimiter, which separates data fields.
2c modules%2Fscalc%2Fui%2Fimoptdialog%2Fasshown bc Enabled by default, data will be saved as displayed, including applied number formats. If this checkbox is not marked, raw data content will be saved, as in older versions of the software.
34 modules%2Fscalc%2Fui%2Fimoptdialog%2Fcharsetdropdown 2c Specifies the character set for text export.
29 modules%2Fscalc%2Fui%2Fimoptdialog%2Ftext 44 Choose or enter the text delimiter, which encloses every data field.
2d modules%2Fscalc%2Fui%2Fimoptdialog%2Fquoteall c0 Exports all text cells with leading and trailing quote characters as set in the Text delimiter box. If not checked, only those text cells get quoted that contain the Field delimiter character.
36 modules%2Fscalc%2Fui%2Ftextimportcsv%2Fmergedelimiters 3e Combines consecutive delimiters and removes blank data fields.
31 modules%2Fscalc%2Fui%2Ftextimportcsv%2Finputother 88 Separates data into columns using the custom separator that you specify. Note: The custom separator must also be contained in your data.
2f modules%2Fscalc%2Fui%2Ftextimportcsv%2Flanguage 2f Determines how the number strings are imported.
2e modules%2Fscalc%2Fui%2Ftextimportcsv%2Ffromrow 35 Specifies the row where you want to start the import.
3a modules%2Fscalc%2Fui%2Ftextimportcsv%2FTextImportCsvDialog 2b Sets the import options for delimited data.
2e modules%2Fscalc%2Fui%2Ftextimportcsv%2Fcharset b2 When this option is enabled, fields or cells whose values are quoted in their entirety (the first and last characters of the value equal the text delimiter) are imported as text.
33 modules%2Fscalc%2Fui%2Ftextimportcsv%2Ftofixedwidth 45 Separates fixed-width data (equal number of characters) into columns.
3b modules%2Fscalc%2Fui%2Ftextimportcsv%2Fdetectspecialnumbers 9e When this option is enabled, Calc will automatically detect all number formats, including special number formats such as dates, time, and scientific notation.
34 modules%2Fscalc%2Fui%2Ftextimportcsv%2Ftoseparatedby 27 Select the separator used in your data.
2a modules%2Fscalc%2Fui%2Ftextimportcsv%2Ftab 2e Separates data delimited by tabs into columns.
30 modules%2Fscalc%2Fui%2Ftextimportcsv%2Fsemicolon 34 Separates data delimited by semicolons into columns.
34 modules%2Fscalc%2Fui%2Ftextimportcsv%2Ftextdelimiter 5c Select a character to delimit text data. You can can also enter a character in the text box.
2c modules%2Fscalc%2Fui%2Ftextimportcsv%2Fcomma 30 Separates data delimited by commas into columns.
31 modules%2Fscalc%2Fui%2Ftextimportcsv%2Fcolumntype 5f Choose a column in the preview window and select the data type to be applied the imported data.
2c modules%2Fscalc%2Fui%2Ftextimportcsv%2Fspace 30 Separates data delimited by spaces into columns.
32 SD%3ARADIOBUTTON%3ADLG_PRINT_WARNINGS%3ARBT_POSTER 3f Specifies whether to distribute the printout on multiple pages.
2f SD%3ARADIOBUTTON%3ADLG_PRINT_WARNINGS%3ARBT_CUT 72 Specifies that anything extending beyond the maximum print range will be cut off and not included in the printing.
25 SD%3AMODALDIALOG%3ADLG_PRINT_WARNINGS 64 The Warning Print Options dialog appears when the page setup does not match the defined print range.
2f modules%2Fswriter%2Fui%2Fasciifilterdialog%2Flf 2d Produces a "Linefeed" as the paragraph break.
2f modules%2Fswriter%2Fui%2Fasciifilterdialog%2Fcr 34 Produces a "Carriage Return" as the paragraph break.
34 modules%2Fswriter%2Fui%2Fasciifilterdialog%2Fcharset 3d Specifies the character set of the file for export or import.
35 modules%2Fswriter%2Fui%2Fasciifilterdialog%2Flanguage 78 Specifies the language of the text, if this has not already been defined. This setting is only available when importing.
31 modules%2Fswriter%2Fui%2Fasciifilterdialog%2Ffont 93 By setting a default font, you specify that the text should be displayed in a specific font. The default fonts can only be selected when importing.
31 modules%2Fswriter%2Fui%2Fasciifilterdialog%2Fcrlf 4a Produces a "Carriage Return" and a "Linefeed". This option is the default.
15 HID_GALLERY_MN_DELETE 30 Deletes the selected graphic after confirmation.
12 HID_GALLERY_MN_ADD 49 Inserts a copy of the selected graphic object directly into the document.
16 HID_GALLERY_MN_ADDMENU 42 Defines how a selected graphic object is inserted into a document.
16 HID_GALLERY_MN_PREVIEW 32 The Preview command displays the selected graphic.
32 cui%2Fui%2Fgallerytitledialog%2FGalleryTitleDialog 2d Assigns a title to a selected Gallery object.
17 HID_GALLERY_MN_ADD_LINK 27 Inserts the selected graphic as a link.
1e HID_MN_READONLY_SAVEBACKGROUND 30 Allows you to save the background of a Web page.
1a HID_MN_READONLY_GRAPHICOFF 32 Sets all graphics in the document to be invisible.
19 HID_MN_READONLY_PLUGINOFF 1b Disables inserted plug-ins.
1b HID_MN_READONLY_SAVEGRAPHIC 38 Opens a dialog where you can save the selected graphics.
1b HID_MN_READONLY_LOADGRAPHIC 64 If you have deactivated the graphics display, choose the Load Graphics command to make them visible.
18 HID_MN_READONLY_COPYLINK 36 Copies the link at the mouse pointer to the clipboard.
1b HID_MN_READONLY_COPYGRAPHIC 2b Copies a selected graphic to the clipboard.
24 cui%2Fui%2Fgallerygeneralpage%2Fname 1f Displays the name of the theme.
2c private%3Afactory%2Fswriter%2FGlobalDocument 1e Creates a new master document.
1b private%3Afactory%2Fswriter 33 Creates a new text document ($[officename] Writer).
d .uno%3ANewDoc 49 If you want to create a document from a template, choose New - Templates.
28 private%3Afactory%2Fswriter%3Fslot=21053 1e Creates a new XForms document.
16 HID_TBXCONTROL_FILENEW 52 Creates a new $[officename] document. Click the arrow to select the document type.
28 private%3Afactory%2Fswriter%3Fslot=21052 93 Opens the Business Cards dialog where you can set the options for your business cards, and then creates a new text document ($[officename] Writer).
10 .uno%3AAddDirect 25 Creates a new $[officename] document.
19 private%3Afactory%2Fscalc 38 Creates a new spreadsheet document ($[officename] Calc).
b slot%3A5500 4d Creates a new document using an existing template or opens a sample document.
28 private%3Afactory%2Fsimpress%3Fslot=6686 72 Creates a new presentation document ($[officename] Impress). If activated, the Presentation Wizard dialog appears.
19 private%3Afactory%2Fsmath 34 Creates a new formula document ($[officename] Math).
2b private%3Afactory%2Fsdatabase%3FInteractive 34 Opens the Database Wizard to create a database file.
19 private%3Afactory%2Fsdraw 34 Creates a new drawing document ($[officename] Draw).
2f service%3Acom.sun.star.sdb.DatabaseWizardDialog 34 Opens the Database Wizard to create a database file.
28 private%3Afactory%2Fswriter%3Fslot=21051 92 Opens the Labels dialog where you can set the options for your labels, and then creates a new text document for the labels ($[officename] Writer).
21 private%3Afactory%2Fswriter%2Fweb 1c Creates a new HTML document.
39 SVTOOLS_PUSHBUTTON_DLG_DOCTEMPLATE_BTN_DOCTEMPLATE_MANAGE 3b Adds, removes, or rearranges templates or sample documents.
1a HID_TEMPLATEDLG_TB_DOCINFO 3e Displays the properties for the selected template or document.
1a HID_TEMPLATEDLG_TB_PREVIEW 38 Allows you to preview the selected template or document.
1c SVT_HID_TEMPLATEDLG_ICONCTRL ad Categories are shown in the box on the left side of the Templates and Documents dialog. Click a category to display the files associated with that category in the Title box.
18 HID_TEMPLATEDLG_TB_PRINT 58 Allows you to preview the template or document, as well as view the document properties.
17 HID_TEMPLATEDLG_TB_PREV 28 Moves up one folder level, if available.
18 HID_TEMPLATEDLG_FILEVIEW c7 Lists the available templates or documents for the selected category. Select a template or document and, then click Open. To preview the document, click the Preview button above the box on the right.
37 SVTOOLS_PUSHBUTTON_DLG_DOCTEMPLATE_BTN_DOCTEMPLATE_EDIT 51 Opens the selected document or creates a document based on the selected template.
17 HID_TEMPLATEDLG_TB_BACK 30 Moves back to the previous window in the dialog.
29 modules%2Fswriter%2Fui%2Flabeldialog%2Fok 23 Creates a new document for editing.
13 .uno%3AInsertLabels 43 Allows you to create labels. Labels are created in a text document.
2e modules%2Fswriter%2Fui%2Fcardmediumpage%2Ftype eb Select the size format that you want to use. The available formats depend on the brand on what you selected in the Brand list. If you want to use a custom label format, select [User], and then click the Format tab to define the format.
2f modules%2Fswriter%2Fui%2Fcardmediumpage%2Fbrand 2f Select the brand of paper that you want to use.
30 modules%2Fswriter%2Fui%2Fcardmediumpage%2Finsert 86 Select the database field that you want, and then click the arrow to the left of this box to insert the field into the Label text box.
38 modules%2Fswriter%2Fui%2Fcardmediumpage%2FCardMediumPage 3f Specify the label text and choose the paper size for the label.
31 modules%2Fswriter%2Fui%2Fcardmediumpage%2Faddress 66 Creates a label with your return address. Text that is currently in the Label text box is overwritten.
2f modules%2Fswriter%2Fui%2Fcardmediumpage%2Fsheet 23 Prints labels on individual sheets.
34 modules%2Fswriter%2Fui%2Fcardmediumpage%2Fcontinuous 22 Prints labels on continuous paper.
2f modules%2Fswriter%2Fui%2Fcardmediumpage%2Ftable 55 Select the database table containing the field(s) that you want to use in your label.
32 modules%2Fswriter%2Fui%2Fcardmediumpage%2Ftextview 5a Enter the text that you want to appear on the label. You can also insert a database field.
32 modules%2Fswriter%2Fui%2Fcardmediumpage%2Fdatabase 4b Select the database that you want to use as the data source for your label.
2f modules%2Fswriter%2Fui%2Fsavelabeldialog%2Ftype 1d Enter or select a label type.
30 modules%2Fswriter%2Fui%2Fsavelabeldialog%2Fbrand 22 Enter or select the desired brand.
2f modules%2Fswriter%2Fui%2Flabelformatpage%2Fhori 8b Displays the distance between the left edges of adjacent labels or business cards. If you are defining a custom format, enter a value here.
2f modules%2Fswriter%2Fui%2Flabelformatpage%2Fleft a3 Displays the distance from the left edge of the page to the left edge of the first label or business card. If you are defining a custom format, enter a value here.
2f modules%2Fswriter%2Fui%2Flabelformatpage%2Frows 5a Enter the number of labels or business cards that you want to span the height of the page.
30 modules%2Fswriter%2Fui%2Flabelformatpage%2Fwidth 6f Displays the width for the label or the business card. If you are defining a custom format, enter a value here.
2f modules%2Fswriter%2Fui%2Flabelformatpage%2Fvert c8 Displays the distance between the upper edge of a label or a business card and the upper edge of the label or the business card directly below. If you are defining a custom format, enter a value here.
2f modules%2Fswriter%2Fui%2Flabelformatpage%2Fsave 30 Saves the current label or business card format.
2f modules%2Fswriter%2Fui%2Flabelformatpage%2Fcols 59 Enter the number of labels or business cards that you want to span the width of the page.
3a modules%2Fswriter%2Fui%2Flabelformatpage%2FLabelFormatPage 1d Set paper formatting options.
31 modules%2Fswriter%2Fui%2Flabelformatpage%2Fheight 6c Displays the height for the label or business card. If you are defining a custom format, enter a value here.
2e modules%2Fswriter%2Fui%2Flabelformatpage%2Ftop 98 Displays distance from the top edge of the page to the top of the first label or business card. If you are defining a custom format, enter a value here.
2c modules%2Fswriter%2Fui%2Ffloatingsync%2Fsync 71 Copies the contents of the top left label or business card to the remaining labels or business cards on the page.
30 modules%2Fswriter%2Fui%2Flabeloptionspage%2Frows 58 Enter the number of rows of labels or business cards that you want to have on your page.
3c modules%2Fswriter%2Fui%2Flabeloptionspage%2FLabelOptionsPage 6f Sets additional options for your labels or business cards, including text synchronization and printer settings.
31 modules%2Fswriter%2Fui%2Flabeloptionspage%2Fsetup 1f Opens the Printer Setup dialog.
36 modules%2Fswriter%2Fui%2Flabeloptionspage%2Fentirepage 31 Creates a full page of  labels or business cards.
37 modules%2Fswriter%2Fui%2Flabeloptionspage%2Fsynchronize af Allows you to edit a single label or business card and updates the contents of the remaining labels or business cards on the page when you click the Synchronize Labels button.
30 modules%2Fswriter%2Fui%2Flabeloptionspage%2Fcols 59 Enter the number of labels or business cards that you want to have in a row on your page.
37 modules%2Fswriter%2Fui%2Flabeloptionspage%2Fsinglelabel 32 Prints a single label or  business card on a page.
19 .uno%3AInsertBusinessCard 2a Design and create your own business cards.
1a HID_BUSINESS_FMT_PAGE_TYPE dd Select the size format that you want to use. The available formats depend on what you selected in the Brand list. If you want to use a custom size format, select [User], and then click the Format tab to define the format.
1b HID_BUSINESS_FMT_PAGE_BRAND 2f Select the brand of paper that you want to use.
1b HID_BUSINESS_FMT_PAGE_SHEET 2b Prints business cards on individual sheets.
1a HID_BUSINESS_FMT_PAGE_CONT 2a Prints business cards on continuous paper.
32 modules%2Fswriter%2Fui%2Fcardformatpage%2Fautotext 4d Select a business card category, and then click a layout in the Content list.
32 modules%2Fswriter%2Fui%2Fcardformatpage%2Ftreeview 67 Select a business card category in AutoText - Section box, and then click a layout in the Content list.
38 modules%2Fswriter%2Fui%2Fcardformatpage%2FCardFormatPage 2d Define the appearance of your business cards.
31 modules%2Fswriter%2Fui%2Fprivateuserpage%2Fmobile 23 Enter your mobile telephone number.
30 modules%2Fswriter%2Fui%2Fprivateuserpage%2Fphone 21 Enter your home telephone number.
35 modules%2Fswriter%2Fui%2Fprivateuserpage%2Fshortname2 4b Enter the initials of the person, whom you want to use as a second contact.
2e modules%2Fswriter%2Fui%2Fprivateuserpage%2Furl 2c Enter the address of your internet homepage.
2e modules%2Fswriter%2Fui%2Fprivateuserpage%2Fjob 23 Enter the title of your profession.
35 modules%2Fswriter%2Fui%2Fprivateuserpage%2Ffirstname2 4d Enter the first name of the person, whom you want to use as a second contact.
32 modules%2Fswriter%2Fui%2Fprivateuserpage%2Fcountry 30 Enter the name of the country in which you live.
34 modules%2Fswriter%2Fui%2Fprivateuserpage%2Flastname2 4c Enter the last name of the person, whom you want to use as a second contact.
2f modules%2Fswriter%2Fui%2Fbusinessdatapage%2Furl 36 Enter the address of your company's internet homepage.
31 modules%2Fswriter%2Fui%2Fbusinessdatapage%2Fphone 25 Enter your business telephone number.
3c modules%2Fswriter%2Fui%2Fbusinessdatapage%2FBusinessDataPage a6 Contains contact information for business cards that use a layout from a 'Business Card, Work' category. Business card layouts are selected on the Business Cards tab.
31 modules%2Fswriter%2Fui%2Fbusinessdatapage%2Fstate 3d Enter the name of the country where your business is located.
34 modules%2Fswriter%2Fui%2Fbusinessdatapage%2Fcompany2 21 Enter additional company details.
32 modules%2Fswriter%2Fui%2Fbusinessdatapage%2Fmobile 23 Enter your mobile telephone number.
32 modules%2Fswriter%2Fui%2Fbusinessdatapage%2Fslogan 21 Enter the slogan of your company.
16 HID_FILEDLG_INSERT_BTN 4b Inserts the selected file into the current document at the cursor position.
2d fpicker%2Fui%2Fexplorerfiledialog%2Ffile_type 78 Select the file type that you want to open, or select All Files (*) to display a list of all of the files in the folder.
14 HID_FILEOPEN_VERSION 5e If there are multiple versions of the selected file, select the version that you want to open.
14 HID_FILEDLG_STANDARD 3d Displays the files and folders in the folder that you are in.
18 SVT_HID_FILEOPEN_LEVELUP 57 Move up one folder in the folder hierarchy. Long-click to see the higher level folders.
18 HID_FILEVIEW_MENU_RENAME 3f To rename a file, right-click the file, and then choose Rename.
2e fpicker%2Fui%2Fexplorerfiledialog%2Fnew_folder 15 Creates a new folder.
36 fpicker%2Fui%2Fexplorerfiledialog%2FExplorerFileDialog 18 Opens or imports a file.
15 HID_FILEOPEN_READONLY 21 Opens the file in read-only mode.
18 HID_FILEVIEW_MENU_DELETE 3f To delete a file, right-click the file, and then choose Delete.
22 svt%2Fui%2Fquerydeletedialog%2Fyes 3c Click to delete the file with the name shown in this dialog.
28 fpicker%2Fui%2Fexplorerfiledialog%2Fopen 1f Opens the selected document(s).
22 svt%2Fui%2Fquerydeletedialog%2Fall 23 Click to delete all selected files.
21 svt%2Fui%2Fquerydeletedialog%2Fno 48 Click to cancel deletion of the file with the name shown in this dialog.
2d fpicker%2Fui%2Fexplorerfiledialog%2Ffile_name 7a Enter a file name or a path for the file. You can also enter a URL that starts with the protocol name ftp, http, or https.
19 HID_FILEDLG_PATH_FILENAME 27 Enter or select the path from the list.
14 HID_FILEDLG_PATH_BTN 1b Selects the indicated path.
33 SFX2%3ALISTBOX%3ADLG_FILTER_SELECT%3ALB_DLG_LISTBOX 3c Select the import filter for the file that you want to open.
f .uno%3ACloseDoc 38 Closes the current document without exiting the program.
b .uno%3ASave 1b Saves the current document.
16 HID_FILESAVE_SELECTION 9a Exports only the selected graphic objects in %PRODUCTNAME Draw and Impress to another format. If this box is not checked, the entire document is exported.
13 HID_FILESAVE_DIALOG 5f Saves the current document in a different location, or with a different file name or file type.
15 HID_FILESAVE_FILETYPE 3c Select the file format for the document that you are saving.
14 HID_FILESAVE_LEVELUP 57 Move up one folder in the folder hierarchy. Long-click to see the higher level folders.
35 fpicker%2Fui%2Fexplorerfiledialog%2Fconnect_to_server 7f Opens a dialog where you can set up connection to various types of servers, including WebDAV, FTP, SSH, Windows Share and CMIS.
15 HID_FILESAVE_FILEVIEW 3d Displays the files and folders in the folder that you are in.
1f SVT_HID_FILESAVE_PLACES_LISTBOX 49 Displays "favourite" places, i.e. shortcuts to local or remote locations.
1c HID_FILESAVE_CREATEDIRECTORY 15 Creates a new folder.
14 HID_FILESAVE_FILEURL 42 Enter a file name or a path for the file. You can also enter a URL
1d HID_FILESAVE_SAVEWITHPASSWORD 57 Protects the file with a password that must be entered before a user can open the file.
1c HID_FILESAVE_CUSTOMIZEFILTER 4e Allows you to set the spreadsheet saving options for some types of data files.
13 HID_FILESAVE_DOSAVE f Saves the file.
f .uno%3AExportTo 5b Saves the current document with a different name and format to a location that you specify.
1c .uno%3ASetDocumentProperties 78 Displays the properties for the current file, including statistics such as word count and the date the file was created.
34 sfx%2Fui%2Fdescriptioninfopage%2FDescriptionInfoPage 34 Contains descriptive information about the document.
29 sfx%2Fui%2Fdescriptioninfopage%2Fkeywords ad Enter the words that you want to use to index the content of your document. Keywords must be separated by commas. A keyword can contain white space characters or semicolons.
29 sfx%2Fui%2Fdescriptioninfopage%2Fcomments 2d Enter comments to help identify the document.
26 sfx%2Fui%2Fdescriptioninfopage%2Ftitle 1f Enter a title for the document.
28 sfx%2Fui%2Fdescriptioninfopage%2Fsubject 61 Enter a subject for the document. You can use a subject to group documents with similar contents.
23 sfx%2Fui%2Fdocumentinfopage%2Freset a3 Resets the editing time to zero, the creation date to the current date and time, and the version number to 1. The modification and printing dates are also deleted.
28 sfx%2Fui%2Fdocumentinfopage%2Fuserdatacb 78 Saves the user's full name with the file. You can edit the name by choosing Tools - Options - $[officename] - User Data.
24 sfx%2Fui%2Fdocumentinfopage%2Fnameed 17 Displays the file name.
2e sfx%2Fui%2Fdocumentinfopage%2FDocumentInfoPage 32 Contains basic information about the current file.
1f sfx%2Fui%2Fcustominfopage%2Fadd 2e Click to add a new row to the Properties list.
26 sfx%2Fui%2Fcustominfopage%2Fproperties ae Enter your custom contents. You can change the name, type, and contents of each row. You can add or remove rows. The items will be exported as metadata to other file formats.
2a sfx%2Fui%2Fcustominfopage%2FCustomInfoPage 40 Allows you to assign custom information fields to your document.
40 modules%2Fswriter%2Fui%2Fstatisticsinfopage%2FStatisticsInfoPage 29 Displays statistics for the current file.
25 sfx%2Fui%2Fsecurityinfopage%2Fprotect d7 Protects the change recording state with a password. If change recording is protected for the current document, the button is named Unprotect. Click Unprotect and type the correct password to disable the protection.
2b sfx%2Fui%2Fsecurityinfopage%2Frecordchanges 5e Select to enable recording changes. This is the same as Edit - Track Changes - Record Changes.
26 sfx%2Fui%2Fsecurityinfopage%2Freadonly 42 Select to allow this document to be opened in read-only mode only.
2e sfx%2Fui%2Fsecurityinfopage%2FSecurityInfoPage 2f Sets password options for the current document.
13 .uno%3ATemplateMenu 5a Lets you organize and edit your templates, as well as save the current file as a template.
29 svt%2Fui%2Faddresstemplatedialog%2Fassign 4e Select the field in the data table that corresponds to the address book entry.
18 .uno%3AAddressBookSource 45 Edit the field assignments and the data source for your address book.
2d svt%2Fui%2Faddresstemplatedialog%2Fdatasource 2d Select the data source for your address book.
28 svt%2Fui%2Faddresstemplatedialog%2Fadmin 36 Add a new data source to the Address Book Source list.
2c svt%2Fui%2Faddresstemplatedialog%2Fdatatable 2c Select the data table for your address book.
32 SFX2%3APUSHBUTTON%3ADLG_DOC_TEMPLATE%3ABT_ORGANIZE 54 Opens the Template Management dialog where you can organize or create new templates.
15 .uno%3ASaveAsTemplate 29 Saves the current document as a template.
2e SFX2%3APUSHBUTTON%3ADLG_DOC_TEMPLATE%3ABT_EDIT 28 Opens the selected template for editing.
28 SFX2%3AEDIT%3ADLG_DOC_TEMPLATE%3AED_NAME 1e Enter a name for the template.
2e SFX2%3ALISTBOX%3ADLG_DOC_TEMPLATE%3ALB_SECTION 34 Select a category in which to save the new template.
32 SFX2%3ALISTBOX%3ADLG_DOC_TEMPLATE%3ALB_STYLESHEETS 28 Lists the available template categories.
13 .uno%3AOpenTemplate 3b Opens a dialog where you can select a template for editing.
3b .HelpID%3Avcl%3APrintDialog%3APageOptions%3ARadioButton%3A3 a8 Specifies that pages are to be printed in tiled format. If the pages or slides are smaller than the paper, several pages or slides will be printed on one page of paper.
3b .HelpID%3Avcl%3APrintDialog%3APageOptions%3ARadioButton%3A2 83 Specifies whether to scale down objects that are beyond the margins of the current printer so they fit on the paper in the printer.
3b .HelpID%3Avcl%3APrintDialog%3APageOptions%3ARadioButton%3A1 44 Specifies that you do not want to further scale pages when printing.
37 .HelpID%3Avcl%3APrintDialog%3AQuality%3ARadioButton%3A1 27 Specifies to print colors as grayscale.
37 .HelpID%3Avcl%3APrintDialog%3AQuality%3ARadioButton%3A0 26 Specifies to print in original colors.
36 .HelpID%3Avcl%3APrintDialog%3AIsPrintHidden%3ACheckBox 3f Specifies whether to print the pages that are currently hidden.
34 .HelpID%3Avcl%3APrintDialog%3AIsPrintName%3ACheckBox 37 Specifies whether to print the page name of a document.
3c .HelpID%3Avcl%3APrintDialog%3APrintPaperFromSetup%3ACheckBox 86 For printers with multiple trays this option specifies whether the paper tray used is specified by the system settings of the printer.
37 .HelpID%3Avcl%3APrintDialog%3AQuality%3ARadioButton%3A2 2d Specifies to print colors as black and white.
3b .HelpID%3Avcl%3APrintDialog%3APrintFormat%3ARadioButton%3A0 3b Prints the formula without adjusting the current font size.
26 vcl%2Fui%2Fprintdialog%2Fsheetmarginsb 37 Select margin between the printed pages and paper edge.
34 .HelpID%3Avcl%3APrintDialog%3AFormulaText%3ACheckBox 5f Specifies whether to include the contents of the Commands window at the bottom of the printout.
3c .HelpID%3Avcl%3APrintDialog%3APrintPageBackground%3ACheckBox 7b Specifies whether to print colors and objects that are inserted to the background of the page (Format - Page - Background).
29 vcl%2Fui%2Fprintdialog%2Fpaperspersheetlb 32 Select how many pages to print per sheet of paper.
24 vcl%2Fui%2Fprintdialog%2Fprinttofile 29 Prints to a file instead of to a printer.
37 .HelpID%3Avcl%3APrintDialog%3APrintScale%3ANumericField 4a Reduces or enlarges the size of the printed formula by a specified factor.
21 vcl%2Fui%2Fprintdialog%2Fpagecols 19 Select number of columns.
3b .HelpID%3Avcl%3APrintDialog%3APrintFormat%3ARadioButton%3A1 3c Adjusts the formula to the page format used in the printout.
c .uno%3APrint 83 Prints the current document, selection, or the pages that you specify. You can also set the print options for the current document.
21 vcl%2Fui%2Fprintdialog%2Fbordercb 28 Check to draw a border around each page.
3d .HelpID%3Avcl%3APrintDialog%3APrintTextPlaceholder%3ACheckBox 78 Enable this option to print text placeholders. Disable this option to leave the text placeholders blank in the printout.
3d .HelpID%3Avcl%3APrintDialog%3APrintAnnotationMode%3AFixedText 29 Specify where to print comments (if any).
3c .HelpID%3Avcl%3APrintDialog%3APrintContent%3ARadioButton%3A0 1b Prints the entire document.
27 vcl%2Fui%2Fprintdialog%2Fsingleprintjob 68 Check to not rely on the printer to create collated copies but create a print job for each copy instead.
20 vcl%2Fui%2Fprintdialog%2Fcollate 32 Preserves the page order of the original document.
2f .HelpID%3Avcl%3APrintDialog%3ABorder%3ACheckBox 3a Applies a thin border to the formula area in the printout.
38 .HelpID%3Avcl%3APrintDialog%3APrintHiddenText%3ACheckBox 3a Enable this option to print text that is marked as hidden.
3c .HelpID%3Avcl%3APrintDialog%3AIsIncludeEmptyPages%3ACheckBox 52 If checked empty pages that have no cell contents or draw objects are not printed.
29 vcl%2Fui%2Fprintdialog%2Fpagespersheetbtn 28 Print multiple pages per sheet of paper.
36 .HelpID%3Avcl%3APrintDialog%3APrintControls%3ACheckBox 4b Specifies whether the form control fields of the text document are printed.
38 .HelpID%3Avcl%3APrintDialog%3APrintBlackFonts%3ACheckBox 30 Specifies whether to always print text in black.
2e .HelpID%3Avcl%3APrintDialog%3APageRange%3AEdit c3 To print a range of pages, use a format like 3-6. To print single pages, use a format like 7;9;11. You can print a combination of page ranges and single pages, by using a format like 3-6;8;10;12.
3b .HelpID%3Avcl%3APrintDialog%3APrintFormat%3ARadioButton%3A2 4a Reduces or enlarges the size of the printed formula by a specified factor.
22 vcl%2Fui%2Fprintdialog%2Fcopycount 32 Enter the number of copies that you want to print.
38 .HelpID%3Avcl%3APrintDialog%3APrintEmptyPages%3ACheckBox 182 If this option is enabled automatically inserted blank pages are printed. This is best if you are printing double-sided. For example, in a book, a "chapter" paragraph style has been set to always start with an odd numbered page. If the previous chapter ends on an odd page, %PRODUCTNAME inserts an even numbered blank page. This option controls whether to print that even numbered page.
25 vcl%2Fui%2Fprintdialog%2Freverseorder 26 Check to print pages in reverse order.
3c .HelpID%3Avcl%3APrintDialog%3APrintContent%3ARadioButton%3A1 42 Prints only the pages or slides that you specify in the Pages box.
35 .HelpID%3Avcl%3APrintDialog%3ASlidesPerPage%3AListBox 29 Select how many slides to print per page.
20 vcl%2Fui%2Fprintdialog%2Forderlb 2e Select order in which pages are to be printed.
1e vcl%2Fui%2Fprintdialog%2Fsetup 6a Opens the printer properties dialog. The printer properties vary according to the printer that you select.
38 .HelpID%3Avcl%3APrintDialog%3AIsPrintDateTime%3ACheckBox 35 Specifies whether to print the current date and time.
40 .HelpID%3Avcl%3APrintDialog%3APrintPicturesAndObjects%3ACheckBox 5d Specifies whether the graphics and drawings or OLE objects of your text document are printed.
3b .HelpID%3Avcl%3APrintDialog%3APrintLeftRightPages%3AListBox 2d Specify which pages to include in the output.
3b .HelpID%3Avcl%3APrintDialog%3APageOptions%3ARadioButton%3A0 2c Specify how to scale slides in the printout.
21 vcl%2Fui%2Fprintdialog%2Fexpander 37 Show/Hide detailed information of the selected printer.
36 .HelpID%3Avcl%3APrintDialog%3APrintProspect%3ACheckBox 44 Select the Brochure option to print the document in brochure format.
3a .HelpID%3Avcl%3APrintDialog%3ASlidesPerPageOrder%3AListBox 32 Specify how to arrange slides on the printed page.
31 .HelpID%3Avcl%3APrintDialog%3ATitleRow%3ACheckBox 53 Specifies whether you want the name of the document to be included in the printout.
3b .HelpID%3Avcl%3APrintDialog%3APrintAnnotationMode%3AListBox 29 Specify where to print comments (if any).
21 vcl%2Fui%2Fprintdialog%2Fprinters f9 The list box shows the installed printers. Click the printer to use for the current print job. Click the Printer details button to see some information about the selected printer. Click the Properties button to change some of the printer properties.
3c .HelpID%3Avcl%3APrintDialog%3APrintProspectInclude%3AListBox 2a Select which pages of a brochure to print.
38 .HelpID%3Avcl%3APrintDialog%3APrintProspectRTL%3AListBox 5e For brochure printing, you can select a left-to-right order of pages or a right-to-left order.
3c .HelpID%3Avcl%3APrintDialog%3APrintContent%3ARadioButton%3A2 46 Prints only the selected area(s) or object(s) in the current document.
26 vcl%2Fui%2Fprintdialog%2Forientationlb 24 Select the orientation of the paper.
25 vcl%2Fui%2Fprintdialog%2Fpagemarginsb 3e Select margin between individual pages on each sheet of paper.
21 vcl%2Fui%2Fprintdialog%2Fpagerows 16 Select number of rows.
37 .HelpID%3Avcl%3APrintDialog%3APageContentType%3AListBox 35 Select which parts of the document should be printed.
39 SVTOOLS%3ALISTBOX%3ADLG_SVT_PRNDLG_PRNSETUPDLG%3ALB_NAMES 7a Lists the installed printers on your operating system. To change the default printer, select a printer name from the list.
32 SVTOOLS%3AMODALDIALOG%3ADLG_SVT_PRNDLG_PRNSETUPDLG 34 Select the default printer for the current document.
16 .uno%3ASendMailDocAsMS 80 Opens a new window in your default e-mail program with the current document as an attachment. The Microsoft file format is used.
17 .uno%3ASendMailDocAsOOo 83 Opens a new window in your default e-mail program with the current document as an attachment. The OpenDocument file format is used.
11 .uno%3ASendToMenu 3f Sends a copy of the current document to different applications.
f .uno%3ASendMail 7e Opens a new window in your default e-mail program with the current document as an attachment. The current file format is used.
15 HID_FILESAVE_TEMPLATE 74 Select the paragraph style or outline level that you want to use to separate the source document into sub-documents.
26 HID_SEND_MASTER_CTRL_PUSHBUTTON_CANCEL b1 Creates a master document from the current Writer document. A new sub-document is created at each occurrence of a chosen paragraph style or outline level in the source document.
b .uno%3AQuit 47 Closes all $[officename] programs and prompts you to save your changes.
e .uno%3ASaveAll 2b Saves all modified $[officename] documents.
25 sfx%2Fui%2Fversionsofdialog%2Fcompare 33 Compare the changes that were made in each version.
26 sfx%2Fui%2Fversionsofdialog%2Fversions 85 Lists the existing versions of the current document, the date and the time they were created, the author and the associated comments.
14 .uno%3AVersionDialog 89 Saves and organizes multiple versions of the current document in the same file. You can also open, delete, and compare previous versions.
22 sfx%2Fui%2Fversionsofdialog%2Fshow 35 Displays the entire comment for the selected version.
22 sfx%2Fui%2Fversionsofdialog%2Fsave a8 Saves the current state of the document as a new version. If you want, you can also enter comments in the Insert Version Comment dialog before you save the new version.
36 sfx%2Fui%2Fversioncommentdialog%2FVersionCommentDialog 7d Enter a comment here when you are saving a new version. If you clicked Show to open this dialog, you cannot edit the comment.
24 sfx%2Fui%2Fversionsofdialog%2Fdelete 1d Deletes the selected version.
22 sfx%2Fui%2Fversionsofdialog%2Fopen 31 Opens the selected version in a read-only window.
24 sfx%2Fui%2Fversionsofdialog%2Falways 77 If you have made changes to your document, $[officename] automatically saves a new version when you close the document.
15 .uno%3ARecentFileList 51 Lists the most recently opened files. To open a file in the list, click its name.
20 svx%2Fui%2Fimapdialog%2FTBI_UNDO a1 Reverses the last command or the last entry you typed. To select the command that you want to reverse, click the arrow next to the Undo icon on the Standard bar.
20 svx%2Fui%2Fimapdialog%2FTBI_REDO 9a Reverses the action of the last Undo command. To select the Undo step that you want to reverse, click the arrow next to the Redo icon on the Standard bar.
d .uno%3ARepeat 47 Repeats the last command. This command is available in Writer and Calc.
a .uno%3ACut 32 Removes and copies the selection to the clipboard.
b .uno%3ACopy 26 Copies the selection to the clipboard.
c .uno%3APaste 6f Inserts the contents of the clipboard at the location of the cursor, and replaces any selected text or objects.
2f modules%2Fscalc%2Fui%2Fpastespecial%2Fmove_down 0 
2c modules%2Fscalc%2Fui%2Fpastespecial%2Fdivide 0 
2e modules%2Fscalc%2Fui%2Fpastespecial%2Fmultiply 0 
2e modules%2Fscalc%2Fui%2Fpastespecial%2Fno_shift 0 
2a modules%2Fscalc%2Fui%2Fpastespecial%2Ftext 0 
13 .uno%3APasteSpecial 5d Inserts the contents of the clipboard into the current file in a format that you can specify.
20 cui%2Fui%2Fpastespecial%2Fsource 2e Displays the source of the clipboard contents.
2e modules%2Fscalc%2Fui%2Fpastespecial%2Fsubtract 0 
2e modules%2Fscalc%2Fui%2Fpastespecial%2Fdatetime 0 
2d modules%2Fscalc%2Fui%2Fpastespecial%2Fformats 0 
1e cui%2Fui%2Fpastespecial%2Flist 42 Select a format for the clipboard contents that you want to paste.
2d modules%2Fscalc%2Fui%2Fpastespecial%2Fobjects 0 
30 modules%2Fscalc%2Fui%2Fpastespecial%2Fmove_right 0 
29 modules%2Fscalc%2Fui%2Fpastespecial%2Fadd 0 
2a modules%2Fscalc%2Fui%2Fpastespecial%2Fnone 0 
2d modules%2Fscalc%2Fui%2Fpastespecial%2Fnumbers 0 
2e modules%2Fscalc%2Fui%2Fpastespecial%2Fcomments 0 
d .uno%3ASelect 46 Selects the entire content of the current file, frame, or text object.
23 svx%2Fui%2Ffindreplacedialog%2Fcols 30 Searches from top to bottom through the columns.
23 svx%2Fui%2Ffindreplacedialog%2Frows 2c Searches from left to right across the rows.
25 svx%2Fui%2Ffindreplacedialog%2Fregexp 2b Allows you to use wildcards in your search.
28 svx%2Fui%2Ffindreplacedialog%2Fmatchcase 39 Distinguishes between uppercase and lowercase characters.
28 svx%2Fui%2Ffindreplacedialog%2Fbackwards 5d Search starts at the current cursor position and goes backwards to the beginning of the file.
f .uno%3AFindText 50 Type the text to search in the current document. Press Enter to search the text.
f .uno%3AUpSearch 38 Click to search the next occurrence in upward direction.
26 svx%2Fui%2Ffindreplacedialog%2Freplace 66 Replaces the selected text or format that you searched for, and then searches for the next occurrence.
2b svx%2Fui%2Ffindreplacedialog%2Fcalcsearchin 9b Searches for the characters that you specify in formulas and in fixed (not calculated) values. For example, you could look for formulas that contain 'SUM'.
29 svx%2Fui%2Ffindreplacedialog%2Fsearchlist 56 Enter the text that you want to search for, or select a previous search from the list.
13 .uno%3ASearchDialog 41 Searches for or replaces text or formats in the current document.
29 svx%2Fui%2Ffindreplacedialog%2Freplaceall 4f Replaces all of the occurrences of the text or format that you want to replace.
28 svx%2Fui%2Ffindreplacedialog%2Fexpander1 60 Shows more or fewer search options. Click this button again to hide the extended search options.
28 svx%2Fui%2Ffindreplacedialog%2Fallsheets 43 Searches through all of the sheets in the current spreadsheet file.
29 svx%2Fui%2Ffindreplacedialog%2Fwholewords 48 Searches for whole words or cells that are identical to the search text.
11 .uno%3ADownSearch 3a Click to search the next occurrence in downward direction.
28 svx%2Fui%2Ffindreplacedialog%2Fselection 29 Searches only the selected text or cells.
25 svx%2Fui%2Ffindreplacedialog%2Flayout cf Searches for text formatted with the style that you specify. Select this checkbox, and then select a style from the Search for list. To specify a replacement style, select a style from the Replace with list.
28 svx%2Fui%2Ffindreplacedialog%2Fsearchall 89 Finds and selects all instances of the text or the format that you are searching for in the document (only in Writer and Calc documents).
2d svx%2Fui%2Ffindreplacedialog%2Fmatchcharwidth 40 Distinguishes between half-width and full-width character forms.
24 svx%2Fui%2Ffindreplacedialog%2Fnotes 48 In Writer, you can select to include the comment texts in your searches.
29 svx%2Fui%2Ffindreplacedialog%2Fsoundslike a2 Lets you specify the search options for similar notation used in Japanese text. Select this checkbox, and then click the ... button to specify the search options.
2c svx%2Fui%2Ffindreplacedialog%2Fsoundslikebtn 43 Sets the search options for similar notation used in Japanese text.
2a svx%2Fui%2Ffindreplacedialog%2Freplacelist 57 Enter the replacement text, or select a recent replacement text or style from the list.
25 svx%2Fui%2Ffindreplacedialog%2Fsearch 63 Finds and selects the next occurrence of the text or format that you searching for in the document.
27 svx%2Fui%2Ffindreplacedialog%2Fnoformat 7b Click in the Search for or the Replace with box, and then click this button to remove the search criteria based on formats.
2e cui%2Fui%2Fsimilaritysearchdialog%2Fshorterfld 53 Enter the number of characters by which a word can be shorter than the search term.
29 svx%2Fui%2Ffindreplacedialog%2Fsimilarity 89 Find terms that are similar to the Search for text. Select this checkbox, and then click the ... button to define the similarity options.
2c svx%2Fui%2Ffindreplacedialog%2Fsimilaritybtn 2a Set the options for the similarity search.
2c cui%2Fui%2Fsimilaritysearchdialog%2Fotherfld 48 Enter the number of characters in the search term that can be exchanged.
2c cui%2Fui%2Fsimilaritysearchdialog%2Frelaxbox 53 Searches for a term that matches any combination of the similarity search settings.
2d cui%2Fui%2Fsimilaritysearchdialog%2Flongerfld 6e Enter the maximum number of characters by which a word can exceed the number of characters in the search term.
2e cui%2Fui%2Fsearchattrdialog%2FSearchAttrDialog 32 Select the attributes that you want to search for.
34 SVX%3APUSHBUTTON%3ARID_SVXDLG_SEARCH%3ABTN_ATTRIBUTE 122 Choose the text attributes that you want to search for. For example, if you search for the Font attribute, all instances of text that do not use the default font are found. All text that has a directly coded font attribute, and all text where a style switches the font attribute, are found.
31 svx%3APushButton%3ARID_SVXDLG_SEARCH%3ABTN_FORMAT 69 Finds specific text formatting features, such as font types, font effects, and text flow characteristics.
e HID_NAVI_TBX22 3a Moves the selection up one position in the Navigator list.
e HID_NAVI_TBX21 a7 Saves a copy of the contents of the linked files in the master document. This ensures that the current contents are available when the linked files cannot be accessed.
15 HID_GLBLTREE_INS_TEXT 90 Inserts a new paragraph in the master document where you can enter text. You cannot insert text next to an existing text entry in the Navigator.
15 HID_GLBLTREE_INS_FILE 3c Inserts one or more existing files into the master document.
e HID_NAVI_TBX23 3c Moves the selection down one position in the Navigator list.
19 HID_GLBLTREE_INS_NEW_FILE 27 Creates and inserts a new sub-document.
13 HID_GLBLTREE_UPDATE 36 Click and choose the contents that you want to update.
11 HID_GLBLTREE_EDIT b8 Edit the contents of the component selected in the Navigator list. If the selection is a file, the file is opened for editing. If the selection is an index, the index dialog is opened.
14 HID_GLBLTREE_UPD_IDX 14 Updates all indexes.
15 HID_GLBLTREE_UPD_LINK 12 Updates all links.
10 HID_GLBLTREE_DEL 2e Deletes the selection from the Navigator list.
14 HID_GLBLTREE_UPD_SEL 26 Updates the contents of the selection.
13 HID_GLBLTREE_INSERT 45 Inserts a file, an index, or a new document into the master document.
1b HID_NAVIGATOR_GLOB_TREELIST b8 The Navigator lists the main components of the master document. If you rest the mouse pointer over a name of a sub-document in the list, the full path of the sub-document is displayed.
13 HID_GLBLTREEUPD_ALL 15 Updates all contents.
16 HID_GLBLTREE_EDIT_LINK 32 Changes the link properties for the selected file.
14 HID_GLBLTREE_INS_IDX 41 Inserts an index or a table of contents into the master document.
27 cui%2Fui%2Fbaselinksdialog%2FBREAK_LINK 99 Breaks the link between the source file and the current document. The most recently updated contents of the source file are kept in the current document.
26 cui%2Fui%2Fbaselinksdialog%2FAUTOMATIC d1 Automatically updates the contents of the link when you open the file. Any changes made in the source file are then displayed in the file containing the link. Linked graphic files can only be updated manually.
2a cui%2Fui%2Fbaselinksdialog%2FCHANGE_SOURCE 2d Change the source file for the selected link.
25 cui%2Fui%2Fbaselinksdialog%2FTB_LINKS 68 Double-click a link in the list to open a file dialog where you can select another object for this link.
27 cui%2Fui%2Fbaselinksdialog%2FUPDATE_NOW 7a Updates the selected link so that the most recently saved version of the linked file is displayed in the current document.
12 .uno%3AManageLinks c6 Lets you edit the properties of each link in the current document, including the path to the source file. This command is not available if the current document does not contain links to other files.
23 cui%2Fui%2Fbaselinksdialog%2FMANUAL 37 Only updates the link when you click the Update button.
20 sfx%2Fui%2Flinkeditdialog%2Ffile 22 Lists the path to the source file.
24 sfx%2Fui%2Flinkeditdialog%2Fcategory 6c Lists the section that the link refers to in the source file. If you want, you can enter a new section here.
1f sfx%2Fui%2Flinkeditdialog%2Fapp 36 Lists the application that last saved the source file.
14 .uno%3APlugInsActive 124 Allows you to edit plug-ins in your file. Choose this command to enable or disable this feature. When enabled, a check mark appears beside this command, and you find commands to edit the plug-in in its context menu. When disabled, you find commands to control the plug-in in its context menu.
13 .uno%3AOriginalSize 28 Resizes the object to the original size.
12 .uno%3AObjectMenue 60 Lets you edit a selected object in your file that you inserted with the Insert - Object command.
38 SFX2%3ARADIOBUTTON%3ATP_FRAMEPROPERTIES%3ARB_SCROLLINGON 2e Displays the scrollbar for the floating frame.
3d SFX2%3ACHECKBOX%3ATP_FRAMEPROPERTIES%3ACB_MARGINHEIGHTDEFAULT 1c Applies the default spacing.
39 SFX2%3ARADIOBUTTON%3ATP_FRAMEPROPERTIES%3ARB_FRMBORDER_ON 2a Displays the border of the floating frame.
29 SFX2%3AEDIT%3ATP_FRAMEPROPERTIES%3AED_URL a7 Enter the path and the name of the file that you want to display in the floating frame. You can also click the ... button and locate the file that you want to display.
34 SFX2%3APUSHBUTTON%3ATP_FRAMEPROPERTIES%3ABT_FILEOPEN 5d Locate the file that you want to display in the selected floating frame, and then click Open.
2f SFX2%3AEDIT%3ATP_FRAMEPROPERTIES%3AED_FRAMENAME 7b Enter a name for the floating frame. The name cannot contain spaces, special characters, or begin with an underscore ( _ ).
23 SFX2%3ATABPAGE%3ATP_FRAMEPROPERTIES a9 Changes the properties of the selected floating frame. Floating frames work best when they contain an html document, and when they are inserted in another html document.
3a SFX2%3ANUMERICFIELD%3ATP_FRAMEPROPERTIES%3ANM_MARGINHEIGHT dc Enter the amount of vertical space that you want to leave between the top and bottom edges of the floating frame and the contents of the frame. Both documents inside and outside the floating frame must be HTML documents.
39 SFX2%3ARADIOBUTTON%3ATP_FRAMEPROPERTIES%3ARB_SCROLLINGOFF 2b Hides the scrollbar for the floating frame.
3a SFX2%3ARADIOBUTTON%3ATP_FRAMEPROPERTIES%3ARB_FRMBORDER_OFF 27 Hides the border of the floating frame.
3a SFX2%3ARADIOBUTTON%3ATP_FRAMEPROPERTIES%3ARB_SCROLLINGAUTO 59 Mark this option if the currently active floating frame can have a scrollbar when needed.
39 SFX2%3ANUMERICFIELD%3ATP_FRAMEPROPERTIES%3ANM_MARGINWIDTH e2 Enter the amount of horizontal space that you want to leave between the right and the left edges of the floating frame and the contents of the frame. Both documents inside and outside the floating frame must be HTML documents.
1b svx%2Fui%2Fimapdialog%2Furl 55 Enter the URL for the file that you want to open when you click the selected hotspot.
24 svx%2Fui%2Fimapdialog%2FTBI_PROPERTY 3c Allows you to define the properties of the selected hotspot.
21 svx%2Fui%2Fimapdialog%2FTBI_MACRO 53 Lets you assign a macro that runs when you click the selected hotspot in a browser.
22 svx%2Fui%2Fimapdialog%2FTBI_ACTIVE 5e Disables or enables the hyperlink for the selected hotspot. A disabled hotspot is transparent.
26 svx%2Fui%2Fimapdialog%2FTBI_POLYDELETE 22 Deletes the selected anchor point.
26 svx%2Fui%2Fimapdialog%2FTBI_POLYINSERT 43 Adds an anchor point where you click on the outline of the hotspot.
22 svx%2Fui%2Fimapdialog%2FTBI_SAVEAS 53 Saves the image map in the MAP-CERN, MAP-NCSA or SIP StarView ImageMap file format.
24 svx%2Fui%2Fimapdialog%2FTBI_POLYMOVE 43 Lets you move the individual anchor points of the selected hotspot.
20 svx%2Fui%2Fimapdialog%2FTBI_OPEN 5b Loads an existing image map in the MAP-CERN, MAP-NCSA or SIP StarView ImageMap file format.
21 svx%2Fui%2Fimapdialog%2Fcontainer 72 dont hide the imagemap if extended tips are onDisplays the image map, so that you can click and edit the hotspots.
22 svx%2Fui%2Fimapdialog%2FImapDialog 93 Allows you to attach URLs to specific areas, called hotspots, on a graphic or a group of graphics. An image map is a group of one or more hotspots.
20 svx%2Fui%2Fimapdialog%2FTBI_RECT b3 Draws a rectangular hotspot where you drag in the graphic. After, you can enter the Address and the Text for the hotspot, and then select the Frame where you want the URL to open.
24 svx%2Fui%2Fimapdialog%2FTBI_POLYEDIT 4f Lets you change the shape of the selected hotspot by editing the anchor points.
21 svx%2Fui%2Fimapdialog%2FTBI_APPLY 33 Applies the changes that you made to the image map.
1c svx%2Fui%2Fimapdialog%2Ftext 59 Enter the text that you want to display when the mouse rests on the hotspot in a browser.
22 svx%2Fui%2Fimapdialog%2FTBI_CIRCLE b3 Draws an elliptical hotspot where you drag in the graphic. After, you can enter the Address and the Text for the hotspot, and then select the Frame where you want the URL to open.
22 svx%2Fui%2Fimapdialog%2FTBI_SELECT 2f Selects a hotspot in the image map for editing.
20 svx%2Fui%2Fimapdialog%2FTBI_POLY 1bb Draws a polygonal hotspot in the graphic. Click this icon, drag in the graphic, and then click to define one side of the polygon. Move to where you want to place the end of the next side, and then click. Repeat until you have drawn all of the sides of the polygon. When you are finished, double-click to close the polygon. After, you can enter the Address and the Text for the hotspot, and then select the Frame where you want the URL to open.
24 svx%2Fui%2Fimapdialog%2FTBI_FREEPOLY 122 Draws a hotspot that is based on a freeform polygon. Click this icon and move to where you want to draw the hotspot. Drag a freeform line and release to close the shape. After, you can enter the Address and the Text for the hotspot, and then select the Frame where you want the URL to open.
21 cui%2Fui%2Fcuiimapdlg%2Fnameentry 1b Enter a name for the image.
22 cui%2Fui%2Fcuiimapdlg%2FIMapDialog 2e Lists the properties for the selected hotspot.
20 cui%2Fui%2Fcuiimapdlg%2Furlentry 55 Enter the URL for the file that you want to open when you click the selected hotspot.
21 cui%2Fui%2Fcuiimapdlg%2Ftextentry 59 Enter the text that you want to display when the mouse rests on the hotspot in a browser.
1e cui%2Fui%2Fcuiimapdlg%2FdescTV 24 Enter a description for the hotspot.
1f cui%2Fui%2Fcuiimapdlg%2FframeCB a0 Enter the name of the target frame that you want to open the URL in. You can also select a standard frame name that is recognized by all browsers from the list.
12 .uno%3AChangesMenu 48 Lists the commands that are available for tracking changes in your file.
16 .uno%3ATraceChangeMode 4b Tracks each change that is made in the current document by author and date.
1d .uno%3AProtectTraceChangeMode 87 Prevents a user from deactivating the record changes feature, or from accepting or rejecting changes unless the user enters a password.
12 .uno%3AShowChanges 20 Shows or hides recorded changes.
19 cui%2Fui%2Fcomment%2Fedit 28 Enter a comment for the recorded change.
14 .uno%3AAcceptChanges 22 Accept or reject recorded changes.
11 HID_SORT_POSITION 82 Sorts the list in a descending order according to the position of the changes in the document. This is the default sorting method.
10 HID_SORT_COMMENT 4a Sorts the list according to the comments that are attached to the changes.
f HID_SORT_AUTHOR 27 Sorts the list according to the Author.
f HID_SORT_ACTION 2f Sorts the list according to the type of change.
16 HID_SC_CHANGES_COMMENT 29 Edit the comment for the selected change.
12 HID_SC_SORT_ACTION 31 Lists the changes that were made in the document.
30 svx%2Fui%2Facceptrejectchangesdialog%2Facceptall 4a Accepts all of the changes and removes the highlighting from the document.
12 HID_SC_SORT_AUTHOR 23 Lists the user who made the change.
10 HID_SC_SORT_DATE 31 Lists the date and time that the change was made.
2c svx%2Fui%2Fredlineviewpage%2FRedlineViewPage 24 Accept or reject individual changes.
2d svx%2Fui%2Facceptrejectchangesdialog%2Freject 59 Rejects the selected change and removes the highlighting from the change in the document.
24 svx%2Fui%2Fredlineviewpage%2Fchanges b0 Lists the changes that were recorded in the document. When you select an entry in the list, the change is highlighted in the document. To sort the list, click a column heading.
13 HID_SC_SORT_COMMENT 33 Lists the comments that are attached to the change.
2d svx%2Fui%2Facceptrejectchangesdialog%2Faccept 59 Accepts the selected change and removes the highlighting from the change in the document.
d HID_SORT_DATE 2e Sorts the list according to the date and time.
30 svx%2Fui%2Facceptrejectchangesdialog%2Frejectall 4a Rejects all of the changes and removes the highlighting from the document.
2a svx%2Fui%2Fredlinefilterpage%2Fcommentedit 4f Filters the comments of the changes according to the keyword(s) that you enter.
28 svx%2Fui%2Fredlinefilterpage%2Frangeedit 3b Select the range of cells that you want to use as a filter.
28 svx%2Fui%2Fredlinefilterpage%2Fdotdotdot 3b Select the range of cells that you want to use as a filter.
26 svx%2Fui%2Fredlinefilterpage%2Fendtime 50 Filters the list of changes according to the date and the time that you specify.
27 svx%2Fui%2Fredlinefilterpage%2Fendclock 3e Enters the current date and time into the corresponding boxes.
29 svx%2Fui%2Fredlinefilterpage%2Fauthorlist 5e Filters the list of changes according to the name of the author that you select from the list.
24 svx%2Fui%2Fredlinefilterpage%2Frange 3b Select the range of cells that you want to use as a filter.
15 .uno%3AMergeDocuments 92 Imports changes made to copies of the same document into the original document. Changes made to footnotes, headers, frames and fields are ignored.
17 .uno%3ACompareDocuments 3e Compares the current document with a document that you select.
19 .uno%3ABib%2FInsertRecord 2c Inserts a new record into the current table.
19 .uno%3ABib%2FDeleteRecord 1b Deletes the current record.
14 .uno%3ABib%2FMapping bd Lets you map the column headings to data fields from a different data source. To define a different data source for your bibliography, click the Data Source button on the record Object Bar.
19 .uno%3ABib%2FremoveFilter 46 To display all of the records in a table, click the Reset Filter icon.
12 .uno%3ABib%2Fquery 17e Type the information that you want to search for, and then press Enter. To change the filter options for the search, long-click the AutoFilter icon, and then select a different data field. You can use wildcards such as % or * for any number of characters, and _ or ? for one character in your search. To display all of the records in the table, clear this box, and then press Enter.
1a EXTENSIONS_HID_BIB_URL_POS 8e Enter additional information for the selected record. If you want, you can also enter the information in the corresponding field in the table.
23 EXTENSIONS_HID_BIB_HOWPUBLISHED_POS 8e Enter additional information for the selected record. If you want, you can also enter the information in the corresponding field in the table.
3c modules%2Fsbibliography%2Fui%2Fmappingdialog%2FMappingDialog a1 Select the data field that you want to map to the current Column name. To change the available data fields, select a different data source for your bibliography.
1b EXTENSIONS_HID_BIB_NOTE_POS 8e Enter additional information for the selected record. If you want, you can also enter the information in the corresponding field in the table.
1d EXTENSIONS_HID_BIB_VOLUME_POS 8e Enter additional information for the selected record. If you want, you can also enter the information in the corresponding field in the table.
17 .uno%3ABib%2FautoFilter 96 Long-click to select the data field that you want to search using the term that you entered in the Search Key box. You can only search one data field.
1e EXTENSIONS_HID_BIB_EDITION_POS 8e Enter additional information for the selected record. If you want, you can also enter the information in the corresponding field in the table.
24 EXTENSIONS_HID_BIB_AUTHORITYTYPE_POS a5 Select the type of record that you want to create. $[officename] inserts a number in the Type column of the record that corresponds to the type that you select here.
18 SVX_HID_GRID_TRAVEL_LAST 23 Go to the last record in the table.
18 SVX_HID_GRID_TRAVEL_NEXT 23 Go to the next record in the table.
1d EXTENSIONS_HID_BIB_SERIES_POS 8e Enter additional information for the selected record. If you want, you can also enter the information in the corresponding field in the table.
13 HID_GRID_TRAVEL_NEW 2c Inserts a new record into the current table.
e HID_BIB_DB_TBX 48 Insert, delete, edit, and organize records in the bibliography database.
1d EXTENSIONS_HID_BIB_NUMBER_POS 8e Enter additional information for the selected record. If you want, you can also enter the information in the corresponding field in the table.
13 .uno%3ABib%2Fsource 73 Lists the available tables in the current database. Click a name in the list to display the records for that table.
11 SID_FM_DELETEROWS 1c Deletes the selected record.
1c EXTENSIONS_HID_BIB_MONTH_POS 8e Enter additional information for the selected record. If you want, you can also enter the information in the corresponding field in the table.
1e EXTENSIONS_HID_BIB_JOURNAL_POS 8e Enter additional information for the selected record. If you want, you can also enter the information in the corresponding field in the table.
21 EXTENSIONS_HID_BIB_IDENTIFIER_POS 6a Enter a short name for the record. The short name appears in the Identifier column in the list of records.
24 EXTENSIONS_HID_BIB_ORGANIZATIONS_POS 8e Enter additional information for the selected record. If you want, you can also enter the information in the corresponding field in the table.
19 SVX_HID_GRID_TRAVEL_FIRST 24 Go to the first record in the table.
20 EXTENSIONS_HID_BIB_PUBLISHER_POS 8e Enter additional information for the selected record. If you want, you can also enter the information in the corresponding field in the table.
18 SVX_HID_GRID_TRAVEL_PREV 27 Go to the previous record in the table.
1b .uno%3ABib%2FstandardFilter 4b Use the Standard Filter to refine and to combine AutoFilter search options.
1c SVX_HID_GRID_TRAVEL_ABSOLUTE 4d Type the number of the record that you want to display, and then press Enter.
1c EXTENSIONS_HID_BIB_TITLE_POS 8e Enter additional information for the selected record. If you want, you can also enter the information in the corresponding field in the table.
1b EXTENSIONS_HID_BIB_YEAR_POS 8e Enter additional information for the selected record. If you want, you can also enter the information in the corresponding field in the table.
1d EXTENSIONS_HID_BIB_AUTHOR_POS 8e Enter additional information for the selected record. If you want, you can also enter the information in the corresponding field in the table.
1e EXTENSIONS_HID_BIB_CHAPTER_POS 8e Enter additional information for the selected record. If you want, you can also enter the information in the corresponding field in the table.
1d EXTENSIONS_HID_BIB_EDITOR_POS 8e Enter additional information for the selected record. If you want, you can also enter the information in the corresponding field in the table.
1d EXTENSIONS_HID_BIB_SCHOOL_POS 8e Enter additional information for the selected record. If you want, you can also enter the information in the corresponding field in the table.
20 EXTENSIONS_HID_BIB_BOOKTITLE_POS 8e Enter additional information for the selected record. If you want, you can also enter the information in the corresponding field in the table.
1c EXTENSIONS_HID_BIB_PAGES_POS 8e Enter additional information for the selected record. If you want, you can also enter the information in the corresponding field in the table.
21 EXTENSIONS_HID_BIB_REPORTTYPE_POS 8e Enter additional information for the selected record. If you want, you can also enter the information in the corresponding field in the table.
1b EXTENSIONS_HID_BIB_ISBN_POS 8e Enter additional information for the selected record. If you want, you can also enter the information in the corresponding field in the table.
1d EXTENSIONS_HID_BIB_ANNOTE_POS 8e Enter additional information for the selected record. If you want, you can also enter the information in the corresponding field in the table.
16 .uno%3ABib%2Fsdbsource 35 Select the data source for the bibliography database.
22 EXTENSIONS_HID_BIB_INSTITUTION_POS 8e Enter additional information for the selected record. If you want, you can also enter the information in the corresponding field in the table.
1e EXTENSIONS_HID_BIB_ADDRESS_POS 8e Enter additional information for the selected record. If you want, you can also enter the information in the corresponding field in the table.
20 cui%2Fui%2Fzoomdialog%2Fbookmode 83 In book mode view layout you see two pages side by side as in an open book. The first page is a right page with an odd page number.
1f cui%2Fui%2Fzoomdialog%2Fcolumns 6c In columns view layout you see pages in a given number of columns side by side. Enter the number of columns.
17 HID_MNU_ZOOM_WHOLE_PAGE 28 Displays the entire page on your screen.
14 HID_MNU_ZOOM_OPTIMAL 66 Resizes the display to fit the width of the text in the document at the moment the command is started.
22 cui%2Fui%2Fzoomdialog%2Fsinglepage 56 The single page view layout displays pages beneath each other, but never side by side.
1e cui%2Fui%2Fzoomdialog%2Fzoomsb 5f Enter the zoom factor at which you want to display the document. Enter a percentage in the box.
21 cui%2Fui%2Fzoomdialog%2Fcolumnssb 6c In columns view layout you see pages in a given number of columns side by side. Enter the number of columns.
b .uno%3AZoom 37 Reduces or enlarges the screen display of %PRODUCTNAME.
22 cui%2Fui%2Fzoomdialog%2FZoomDialog 37 Reduces or enlarges the screen display of %PRODUCTNAME.
17 HID_MNU_ZOOM_PAGE_WIDTH 6a Displays the complete width of the document page. The top and bottom edges of the page may not be visible.
1d cui%2Fui%2Fzoomdialog%2F100pc 29 Displays the document at its actual size.
14 SVX_HID_MNU_ZOOM_100 29 Displays the document at its actual size.
e .uno%3AView100 29 Displays the document at its actual size.
21 cui%2Fui%2Fzoomdialog%2Fautomatic 59 The automatic view layout displays pages side by side, as many as the zoom factor allows.
19 .uno%3AFunctionBarVisible 20 Shows or hides the Standard Bar.
1a .uno%3AShowImeStatusWindow 3b Shows or hides the Input Method Engine (IME) status window.
15 .uno%3AToolBarVisible 1d Shows or hides the Tools bar.
17 .uno%3AStatusBarVisible 3f Shows or hides the Status Bar at the bottom edge of the window.
15 .uno%3ATaskBarVisible 3f Shows or hides the Status Bar at the bottom edge of the window.
15 HID_FULLSCREENTOOLBOX 76 In Writer and Calc, you can also use the shortcut keys Ctrl+Shift+J to switch between the normal and full screen mode.
11 .uno%3AFullScreen 90 Shows or hides the menus and toolbars in Writer or Calc. To exit the full screen mode, click the Full Screen On/Off button or press the Esc key.
31 SFX2%3APUSHBUTTON%3ADLG_SFX_QUERYDELETE%3ABTN_ALL 2c Performs the deletion in all selected files.
31 SFX2%3APUSHBUTTON%3ADLG_SFX_QUERYDELETE%3ABTN_YES 2a Performs the deletion in the current file.
30 SFX2%3APUSHBUTTON%3ADLG_SFX_QUERYDELETE%3ABTN_NO 2a Rejects the deletion for the current file.
28 SFX2%3AMODALDIALOG%3ADLG_SFX_QUERYDELETE 21 Confirms or cancels the deletion.
14 HID_COLOR_CTL_COLORS 145 Click the color that you want to use. To change the fill color of an object in the current file, select the object and then click a color. To change the line color of the selected object, right-click a color. To change the color of text in a text object, double-click the text-object, select the text, and then click a color.
13 .uno%3AColorControl 8b Show or hides the Color Bar. To modify or change the color table that is displayed, choose Format - Area, and then click on the Colors tab.
18 .cmd%3ARestoreVisibility aa Choose View - Toolbars - Reset to reset the toolbars to their default context sensitive behavior. Now some toolbars will be shown automatically, dependent on the context.
18 .uno%3AAvailableToolbars 2a Opens a submenu to show and hide toolbars.
1a .uno%3ADeleteAllAnnotation 2c Delete all comments in the current document.
15 .uno%3ADeleteAllNotes 2c Delete all comments in the current document.
16 .uno%3AShowAnnotations 49 Use View - Comments to show or hide all comments (not available in Calc).
17 .uno%3AInsertAnnotation 12 Inserts a comment.
22 .uno%3ADeleteAllAnnotationByAuthor 3b Delete all comments by this author in the current document.
17 .uno%3ADeleteAnnotation 1b Delete the current comment.
11 .uno%3ADeleteNote 1b Delete the current comment.
13 .uno%3ADeleteAuthor 3b Delete all comments by this author in the current document.
b .uno%3AScan 2b Inserts a scanned image into your document.
12 .uno%3ATwainSelect 29 Selects the scanner that you want to use.
14 .uno%3ATwainTransfer 82 Scans an image, and then inserts the result into the document. The scanning dialog is provided by the manufacturer of the scanner.
17 HID_CHARMAP_CTL_SHOWSET 4a Click the special character(s) that you want to insert, and then click OK.
27 cui%2Fui%2Fspecialcharacters%2Fsubsetlb 2f Select a Unicode category for the current font.
25 cui%2Fui%2Fspecialcharacters%2Ffontlb 4c Select a font to display the special characters that are associated with it.
d .uno%3ABullet 34 Inserts special characters from the installed fonts.
16 HID_FILEDLG_PREVIEW_CB 30 Displays a preview of the selected graphic file.
13 HID_FILEDLG_LINK_CB 2c Inserts the selected graphic file as a link.
1b HID_FILEOPEN_IMAGE_TEMPLATE 27 Select the frame style for the graphic.
14 .uno%3AInsertGraphic 2c Inserts a picture into the current document.
11 .uno%3AObjectMenu 69 Inserts an object into your document. For movies and sounds, use Insert - Media - Audio or Video instead.
23 cui%2Fui%2Finsertoleobject%2Furlbtn 3d Locate the file that you want to insert, and then click Open.
22 cui%2Fui%2Finsertoleobject%2Furled 5f Enter the name of the file that you want to link or embed, or click Search, to locate the file.
13 .uno%3AInsertObject 6c Inserts an OLE object into the current document. The OLE object is inserted as a link or an embedded object.
22 cui%2Fui%2Finsertoleobject%2Ftypes 34 Select the type of document that you want to create.
26 cui%2Fui%2Finsertoleobject%2Fcreatenew 42 Creates a new OLE object based on the object type that you select.
2b cui%2Fui%2Finsertoleobject%2Fcreatefromfile 2c Creates an OLE object from an existing file.
20 cui%2Fui%2Finsertplugin%2Furlbtn 40 Locate the plug-in that you want to insert, and then click Open.
27 cui%2Fui%2Finsertplugin%2Fpluginoptions 4d Enter the parameters for the plug-in using the format parameter1="some text".
1f cui%2Fui%2Finsertplugin%2Furled 63 Enter the URL for the plug-in or click Browse, and then locate the plug-in that you want to insert.
13 .uno%3AInsertPlugin 2c Inserts a plug-in into the current document.
12 .uno%3AInsertSound 30 Inserts an audio file into the current document.
12 .uno%3AInsertVideo 2f Inserts a video file into the current document.
1b .uno%3AInsertObjectStarMath 2c Inserts a formula into the current document.
20 .uno%3AInsertObjectFloatingFrame 87 Inserts a floating frame into the current document. Floating frames are used in HTML documents to display the contents of another file.
1c .uno%3AViewDataSourceBrowser 6a Lists the databases that are registered in %PRODUCTNAME and lets you manage the contents of the databases.
11 .uno%3ADataImport 6a Lists the databases that are registered in %PRODUCTNAME and lets you manage the contents of the databases.
12 .uno%3AGraphicMenu 38 Select the source for a picture that you want to insert.
1d .uno%3AStandardTextAttributes 50 Removes direct formatting and formatting by character styles from the selection.
11 .uno%3AFontDialog 45 Changes the font and the font formatting for the selected characters.
23 cui%2Fui%2Fcharnamepage%2Fctllanglb 9c Sets the language that the spellchecker uses for the selected text or the text that you type. Available language modules have a check mark in front of them.
26 cui%2Fui%2Fcharnamepage%2FCharNamePage 3b Specify the formatting and the font that you want to apply.
27 cui%2Fui%2Fcharnamepage%2Fctlfontnamelb 59 Enter the name of an installed font that you want to use, or select a font from the list.
24 cui%2Fui%2Fcharnamepage%2Fctlstylelb 2d Select the formatting that you want to apply.
23 cui%2Fui%2Fcharnamepage%2Fctlsizelb 6c Enter or select the font size that you want to apply. For scalable fonts, you can also enter decimal values.
23 cui%2Fui%2Feffectspage%2Fpositionlb 2c Specify where to display the emphasis marks.
2a cui%2Fui%2Feffectspage%2Findividualwordscb 3d Applies the selected effect only to words and ignores spaces.
29 cui%2Fui%2Feffectspage%2Funderlinecolorlb 25 Select the color for the underlining.
21 cui%2Fui%2Feffectspage%2Frelieflb e1 Select a relief effect to apply to the selected text. The embossed relief makes the characters appear as if they are raised above the page. The engraved relief makes the characters appear as if they are pressed into the page.
28 cui%2Fui%2Feffectspage%2Foverlinecolorlb 24 Select the color for the overlining.
23 cui%2Fui%2Feffectspage%2Femphasislb 53 Select a character to display over or below the entire length of the selected text.
24 cui%2Fui%2Feffectspage%2Funderlinelb 7d Select the underlining style that you want to apply. To apply the underlining to words only, select the Individual Words box.
10 .uno%3AFontColor cf Click to apply the current font color to the selected characters. You can also click here, and then drag a selection to change the text color. Click the arrow next to the icon to open the Font color toolbar.
24 cui%2Fui%2Feffectspage%2Ffontcolorlb 96 Sets the color for the selected text. If you select Automatic, the text color is set to black for light backgrounds and to white for dark backgrounds.
24 cui%2Fui%2Feffectspage%2Fstrikeoutlb 33 Select a strikethrough style for the selected text.
24 cui%2Fui%2Feffectspage%2FEffectsPage 2e Specify the font effects that you want to use.
22 cui%2Fui%2Feffectspage%2Foutlinecb 5b Displays the outline of the selected characters. This effect does not work with every font.
21 cui%2Fui%2Feffectspage%2Fshadowcb 4b Adds a shadow that casts below and to the right of the selected characters.
f .uno%3AOverline 81 Overlines or removes overlining from the selected text. If the cursor is not in a word, the new text that you enter is overlined.
23 cui%2Fui%2Feffectspage%2Foverlinelb 7b Select the overlining style that you want to apply. To apply the overlining to words only, select the Individual Words box.
2a cui%2Fui%2Fnumberingformatpage%2Fcommented 50 Enter a comment for the selected number format, and then click outside this box.
25 cui%2Fui%2Fnumberingformatpage%2Fedit 2d Adds a comment to the selected number format.
2c cui%2Fui%2Fnumberingformatpage%2Fengineering 56 With scientific format, Engineering notation ensures that exponent is a multiple of 3.
29 cui%2Fui%2Fnumberingformatpage%2Fformatlb 49 Select how you want the contents of the selected cell(s) to be displayed.
2b cui%2Fui%2Fnumberingformatpage%2Flanguagelb 100 Specifies the language setting for the selected fields. With the language set to Automatic, $[officename] automatically applies the number formats associated with the system default language. Select any language to fix the settings for the selected fields.
2b cui%2Fui%2Fnumberingformatpage%2Fdecimalsed 3c Enter the number of decimal places that you want to display.
2b cui%2Fui%2Fnumberingformatpage%2Fcategorylb 56 Select a category from the list, and then select a formatting style in the Format box.
24 cui%2Fui%2Fnumberingformatpage%2Fadd 4a Adds the number format code that you entered to the user-defined category.
2b cui%2Fui%2Fnumberingformatpage%2Fcurrencylb 71 Select a currency, and then scroll to the top of the Format list to view the formatting options for the currency.
2c cui%2Fui%2Fnumberingformatpage%2Fleadzerosed 4c Enter the maximum number of zeroes to display in front of the decimal point.
1e .uno%3ATableNumberFormatDialog 38 Specify the formatting options for the selected cell(s).
2a cui%2Fui%2Fnumberingformatpage%2Fthousands 6c Inserts a separator between thousands. The type of separator that is used depends on your language settings.
27 cui%2Fui%2Fnumberingformatpage%2Fdelete 23 Deletes the selected number format.
2d cui%2Fui%2Fnumberingformatpage%2Fsourceformat 4b Uses the same number format as the cells containing the data for the chart.
29 cui%2Fui%2Fnumberingformatpage%2Fformated 5c Displays the number format code for the selected format. You can also enter a custom format.
2a cui%2Fui%2Fnumberingformatpage%2Fnegnumred 32 Changes the font color of negative numbers to red.
32 modules%2Fswriter%2Fui%2Fcharurlpage%2Funvisitedlb c1 Select a formatting style to use for unvisited links from the list. To add or modify a style in this list, close this dialog, and click the Styles and Formatting icon on the Formatting toolbar.
30 modules%2Fswriter%2Fui%2Fcharurlpage%2Fvisitedlb bf Select a formatting style to use for visited links from the list. To add or modify a style in this list, close this dialog, and click the Styles and Formatting icon on the Formatting toolbar.
2d modules%2Fswriter%2Fui%2Fcharurlpage%2Fnameed 1f Enter a name for the hyperlink.
2e modules%2Fswriter%2Fui%2Fcharurlpage%2Feventpb 3c Specify an event that triggers when you click the hyperlink.
19 .uno%3AInsertHyperlinkDlg 38 Assigns a new hyperlink or edits the selected hyperlink.
2c modules%2Fswriter%2Fui%2Fcharurlpage%2Furled 4c Enter a URL for the file that you want to open when you click the hyperlink.
2c modules%2Fswriter%2Fui%2Fcharurlpage%2Furlpb 3e Locate the file that you want to link to, and then click Open.
32 modules%2Fswriter%2Fui%2Fcharurlpage%2Ftargetfrmlb 71 Enter the name of the frame that you want the linked file to open in, or select a predefined frame from the list.
2d modules%2Fswriter%2Fui%2Fcharurlpage%2Ftexted 3a Enter the text that you want to display for the hyperlink.
25 cui%2Fui%2Fpositionpage%2Fpairkerning 4c Automatically adjust the character spacing for specific letter combinations.
20 cui%2Fui%2Fpositionpage%2Fnormal 2c Removes superscript or subscript formatting.
23 cui%2Fui%2Fpositionpage%2Fkerninglb b2 Specifies the spacing between the characters of the selected text. For expanded or condensed spacing, enter the amount that you want to expand or condense the text in the by box.
23 cui%2Fui%2Fpositionpage%2Fkerningsb 65 Enter the amount by which you want to expand or condense the character spacing for the selected text.
25 cui%2Fui%2Fpositionpage%2Fsuperscript 52 Reduces the font size of the selected text and raises the text above the baseline.
23 cui%2Fui%2Fpositionpage%2Fsubscript 52 Reduces the font size of the selected text and lowers the text below the baseline.
26 cui%2Fui%2Fpositionpage%2FPositionPage 44 Specify the position, scaling, rotation, and spacing for characters.
24 cui%2Fui%2Fpositionpage%2Ffontsizesb 50 Enter the amount by which you want to reduce the font size of the selected text.
26 cui%2Fui%2Fpositionpage%2Fraiselowersb 9e Enter the amount by which you want to raise or to lower the selected text in relation to the baseline. One hundred percent is equal to the height of the font.
23 cui%2Fui%2Fpositionpage%2Fautomatic 6a Automatically sets the amount by which the selected text is raised or lowered in relation to the baseline.
26 cui%2Fui%2Fpositionpage%2Fscalewidthsb 66 Enter the percentage of the font width by which to horizontally stretch or compress the selected text.
26 cui%2Fui%2Ftwolinespage%2Fstartbracket 85 Select the character to define the start of the double-lined area. If you want to choose a custom character, select Other Characters.
22 cui%2Fui%2Ftwolinespage%2Ftwolines 5a Allows you to write in double lines in the area that you selected in the current document.
24 cui%2Fui%2Ftwolinespage%2Fendbracket 83 Select the character to define the end of the double-lined area. If you want to choose a custom character, select Other Characters.
26 cui%2Fui%2Ftwolinespage%2FTwoLinesPage 7f Sets the options for double-line writing for Asian languages. Select the characters in your text, and then choose this command.
2e cui%2Fui%2Fasiantypography%2FcheckApplySpacing 3c Inserts a space between Asian, Latin and complex characters.
2b cui%2Fui%2Fasiantypography%2FcheckHangPunct 88 Prevents commas and periods from breaking the line. Instead, these characters are added to the end of the line, even in the page margin.
2c cui%2Fui%2Fasiantypography%2FcheckForbidList 89 Prevents the characters in the list from starting or ending a line. The characters are relocated to either the previous or the next line.
2c cui%2Fui%2Fasiantypography%2FAsianTypography f2 Set the typographic options for cells or paragraphs in Asian language files. To enable Asian language support, choose Language Settings - Languages in the Options dialog box, and then select the Enabled box in the Asian language support area.
10 .uno%3AEditStyle 4c Modifies the format of the current paragraph, such as indents and alignment.
34 cui%2Fui%2Fparaindentspacing%2FspinED_LINEDISTMETRIC 2c Enter the value to use for the line spacing.
2f cui%2Fui%2Fparaindentspacing%2FcomboLB_LINEDIST 4a Specify the amount of space to leave between lines of text in a paragraph.
2d cui%2Fui%2Fparaindentspacing%2FspinED_TOPDIST 51 Enter the amount of space that you want to leave above the selected paragraph(s).
30 cui%2Fui%2Fparaindentspacing%2FParaIndentSpacing 3d Sets the indenting and the spacing options for the paragraph.
30 cui%2Fui%2Fparaindentspacing%2FspinED_BOTTOMDIST 51 Enter the amount of space that you want to leave below the selected paragraph(s).
30 cui%2Fui%2Fparaindentspacing%2FspinED_LEFTINDENT 184 Enter the amount of space that you want to indent the paragraph from the page margin. If you want the paragraph to extend into the page margin, enter a negative number. In Left-to-Right languages, the left edge of the paragraph is indented with respect to the left page margin. In Right-to-Left languages, the right edge of the paragraph is indented with respect to the right page margin.
38 cui%2Fui%2Fparaindentspacing%2FcheckCB_CONTEXTUALSPACING 94 Makes any space specified before or after this paragraph not be applied when the preceding and following paragraphs are of the same paragraph style.
31 cui%2Fui%2Fparaindentspacing%2FspinED_RIGHTINDENT 184 Enter the amount of space that you want to indent the paragraph from the page margin. If you want the paragraph to extend into the page margin, enter a negative number. In Left-to-Right languages, the right edge of the paragraph is indented with respect to the right page margin. In Right-to-Left languages, the left edge of the paragraph is indented with respect to the left page margin.
31 cui%2Fui%2Fparaindentspacing%2FspinED_FLINEINDENT 12a Indents the first line of a paragraph by the amount that you enter. To create a hanging indent enter a positive value for "Before text" and a negative value for "First line". To indent the first line of a paragraph that uses numbering or bullets, choose "Format - Bullets and Numbering - Position".
2a cui%2Fui%2Fparatabspage%2FbuttonBTN_DELALL 80 Removes all of the tab stops that you defined under Position. Sets Left tab stops at regular intervals as the default tab stops.
27 cui%2Fui%2Fparatabspage%2FbuttonBTN_NEW 3c Adds the tab stop that you defined to the current paragraph.
37 cui%2Fui%2Fparatabspage%2FradiobuttonBTN_FILLCHAR_OTHER 56 Allows you to specify a character to fill the empty space to the left of the tab stop.
3c cui%2Fui%2Fparatabspage%2FradiobuttonBTN_FILLCHAR_UNDERSCORE 41 Draws a line to fill the empty space to the left of the tab stop.
36 cui%2Fui%2Fparatabspage%2FradiobuttonBTN_TABTYPE_RIGHT 63 Aligns the right edge of the text to the tab stop and extends the text to the left of the tab stop.
31 cui%2Fui%2Fparatabspage%2FentryED_TABTYPE_DECCHAR 4e Enter a character that you want the decimal tab to use as a decimal separator.
3a cui%2Fui%2Fparatabspage%2FradiobuttonBTN_FILLCHAR_DASHLINE 3e Fills the empty space to the left of the tab stop with dashes.
23 cui%2Fui%2Fparatabspage%2FED_TABPOS fa Select a tab stop type, enter a new measurement, and then click New. If you want, you can also specify the measurement units to use for the tab (cm for centimeter, or " for inches). Existing tabs to the left of the first tab that you set are removed.
2b cui%2Fui%2Fparatabspage%2FParagraphTabsPage 2e Set the position of a tab stop in a paragraph.
37 cui%2Fui%2Fparatabspage%2FradiobuttonBTN_TABTYPE_CENTER 2e Aligns the center of the text to the tab stop.
34 cui%2Fui%2Fparatabspage%2FradiobuttonBTN_FILLCHAR_NO 5c Inserts no fill characters, or removes existing fill characters to the left of the tab stop.
38 cui%2Fui%2Fparatabspage%2FradiobuttonBTN_TABTYPE_DECIMAL 67 Aligns the decimal separator of a number to the center of the tab stop and text to the left of the tab.
35 cui%2Fui%2Fparatabspage%2FradiobuttonBTN_TABTYPE_LEFT 53 Aligns the left edge of the text to the tab stop and extends the text to the right.
38 cui%2Fui%2Fparatabspage%2FradiobuttonBTN_FILLCHAR_POINTS 3c Fills the empty space to the left of the tab stop with dots.
25 cui%2Fui%2Fborderpage%2Fshadowcolorlb 1e Select a color for the shadow.
22 cui%2Fui%2Fborderpage%2Fdistancemf 1e Enter the width of the shadow.
23 cui%2Fui%2Fborderpage%2Flinestylelb 6b Click the border style that you want to apply. The style is applied to the borders selected in the preview.
1f cui%2Fui%2Fborderpage%2Fpresets 2a Select a predefined border style to apply.
23 cui%2Fui%2Fborderpage%2Flinecolorlb 46 Select the line color that you want to use for the selected border(s).
1e cui%2Fui%2Fborderpage%2Fleftmf 63 Enter the distance that you want to have between the left border and the contents of the selection.
1f cui%2Fui%2Fborderpage%2Frightmf 64 Enter the distance that you want to have between the right border and the contents of the selection.
1f cui%2Fui%2Fborderpage%2Fshadows 2e Click a shadow style for the selected borders.
22 cui%2Fui%2Fborderpage%2FBorderPage 43 Sets the border options for the selected objects in Writer or Calc.
1d cui%2Fui%2Fborderpage%2Ftopmf 62 Enter the distance that you want to have between the top border and the contents of the selection.
20 cui%2Fui%2Fborderpage%2Fbottommf 65 Enter the distance that you want to have between the bottom border and the contents of the selection.
1c cui%2Fui%2Fborderpage%2Fsync 5f Applies the same spacing to contents setting to all four borders when you enter a new distance.
18 SVX_HID_POPUP_COLOR_CTRL 71 Click a color. Click No Fill to remove a background or highlighting color. Click Automatic to reset a font color.
22 cui%2Fui%2Fbackgroundpage%2Farearb 4b Stretches the graphic to fill the entire background of the selected object.
26 cui%2Fui%2Fbackgroundpage%2Fpositionrb 43 Select this option, and then click a location in the position grid.
22 cui%2Fui%2Fbackgroundpage%2Fbrowse 52 Locate the graphic file that you want to use as a background, and then click Open.
27 cui%2Fui%2Fbackgroundpage%2Fshowpreview 34 Displays or hides a preview of the selected graphic.
22 cui%2Fui%2Fbackgroundpage%2Ftilerb 53 Repeats the graphic so that it covers the entire background of the selected object.
2a cui%2Fui%2Fbackgroundpage%2FBackgroundPage 24 Set the background color or graphic.
24 cui%2Fui%2Fbackgroundpage%2Fselectlb 35 Select the type of background that you want to apply.
2e cui%2Fui%2Fbackgroundpage%2Fbackgroundcolorset 62 Click the color that you want to use as a background. To remove a background color, click No Fill.
20 cui%2Fui%2Fbackgroundpage%2Flink 38 Links to or embeds the graphic file in the current file.
35 modules%2Fswriter%2Fui%2Fcolumnpage%2Ftextdirectionlb 99 Specify the text direction for a paragraph that uses complex text layout (CTL). This feature is only available if complex text layout support is enabled.
31 cui%2Fui%2Fparagalignpage%2FradioBTN_JUSTIFYALIGN 3f Aligns the paragraph to the left and to the right page margins.
29 cui%2Fui%2Fparagalignpage%2FParaAlignPage 44 Sets the alignment of the paragraph relative to the margins of page.
2e cui%2Fui%2Fparagalignpage%2FradioBTN_LEFTALIGN 2d Aligns the paragraph to the left page margin.
2f cui%2Fui%2Fparagalignpage%2FradioBTN_RIGHTALIGN 2e Aligns the paragraph to the right page margin.
30 cui%2Fui%2Fparagalignpage%2FradioBTN_CENTERALIGN 32 Centers the contents of the paragraph on the page.
20 cui%2Fui%2Fcroppage%2Fheightzoom 39 Enter the height of the selected graphic as a percentage.
1c cui%2Fui%2Fcroppage%2Fheight 28 Enter a height for the selected graphic.
1a cui%2Fui%2Fcroppage%2Fleft 161 If the Keep Scale option is selected, enter a positive amount to trim the left edge of the graphic, or a negative amount to add white space to the left of the graphic. If the Keep image size option is selected, enter a positive amount to increase the horizontal scale of the graphic, or a negative amount to decrease the horizontal scale of the graphic.
1e cui%2Fui%2Fcroppage%2Forigsize 32 Returns the selected graphic to its original size.
1e cui%2Fui%2Fcroppage%2FCropPage 5c Trims or scales the selected graphic. You can also restore the graphic to its original size.
1b cui%2Fui%2Fcroppage%2Fright 163 If the Keep Scale option is selected, enter a positive amount to trim the right edge of the graphic, or a negative amount to add white space to the right of the graphic. If the Keep image size option is selected, enter a positive amount to increase the horizontal scale of the graphic, or a negative amount to decrease the horizontal scale of the graphic.
1f cui%2Fui%2Fcroppage%2Fkeepscale 68 Maintains the original scale of the graphic when you crop, so that only the size of the graphic changes.
19 cui%2Fui%2Fcroppage%2Ftop 14e If the Keep Scale option is selected, enter a positive amount to trim the top of the graphic, or a negative amount to add white space above the graphic. If the Keep image size option is selected, enter a positive amount to increase the vertical scale of the graphic, or a negative amount to decrease the vertical scale of the graphic.
1f cui%2Fui%2Fcroppage%2Fwidthzoom 39 Enter the width for the selected graphic as a percentage.
1e cui%2Fui%2Fcroppage%2Fkeepsize 123 Maintains the original size of the graphic when you crop, so that only the scale of the graphic changes. To reduce the scale of the graphic, select this option and enter negative values in the cropping boxes. To increase the scale of the graphic, enter positive values in the cropping boxes.
1b cui%2Fui%2Fcroppage%2Fwidth 27 Enter a width for the selected graphic.
1c cui%2Fui%2Fcroppage%2Fbottom 151 If the Keep Scale option is selected, enter a positive amount to trim the bottom of the graphic, or a negative amount to add white space below the graphic. If the Keep image size option is selected, enter a positive amount to increase the vertical scale of the graphic, or a negative amount to decrease the vertical scale of the graphic.
21 sfx%2Fui%2Fmanagestylepage%2Fdesc 3c Describes the relevant formatting used in the current style.
25 sfx%2Fui%2Fmanagestylepage%2Fcategory 7f Displays the category for the current style. If you are creating or modifying a new style, select 'Custom Style' from the list.
27 sfx%2Fui%2Fmanagestylepage%2Flinkedwith 69 Select an existing style that you want to base the new style on, or select none to define your own style.
2c sfx%2Fui%2Fmanagestylepage%2FManageStylePage 27 Set the options for the selected style.
27 sfx%2Fui%2Fmanagestylepage%2Fautoupdate b0 Updates the style when you apply direct formatting to a paragraph using this style in your document. The formatting of all paragraphs using this style is automatically updated.
23 sfx%2Fui%2Fmanagestylepage%2Fnamerw a7 Displays the name of the selected style. If you are creating or modifying a custom style, enter a name for the style. You cannot change the name of a predefined style.
26 sfx%2Fui%2Fmanagestylepage%2Fnextstyle 102 Select an existing style that you want to follow the current style in your document. For paragraph styles, the next style is applied to the paragraph that is created when you press Enter. For page styles, the next style is applied when a new page is created.
2d cui%2Fui%2Fpageformatpage%2FcomboLayoutFormat 51 Select the page numbering format that you want to use for the current page style.
2b cui%2Fui%2Fpageformatpage%2FcheckbuttonHorz 0 
2d cui%2Fui%2Fpageformatpage%2FcheckRegisterTrue 43 Aligns the text on the selected Page Style to a vertical page grid.
27 cui%2Fui%2Fpageformatpage%2FspinMargBot 5c Enter the amount of space to leave between the lower edge of the page and the document text.
25 cui%2Fui%2Fpageformatpage%2FspinWidth 5f Displays the width of the selected paper format. To define a custom format, enter a width here.
2b cui%2Fui%2Fpageformatpage%2FcomboPageFormat 81 Select a predefined paper size, or create a custom format by entering the dimensions for the paper in the Height and Width boxes.
2b cui%2Fui%2Fpageformatpage%2FcomboPageLayout 60 Specify whether the current style should show odd pages, even pages, or both odd and even pages.
2f cui%2Fui%2Fpageformatpage%2FradiobuttonPortrait 4c Displays and prints the current document with the paper oriented vertically.
2a cui%2Fui%2Fpageformatpage%2FPageFormatPage 73 Allows you to define page layouts for single and multiple-page documents, as well as a numbering and paper formats.
26 cui%2Fui%2Fpageformatpage%2FspinHeight 61 Displays the height of the selected paper format. To define a custom format, enter a height here.
30 cui%2Fui%2Fpageformatpage%2FradiobuttonLandscape 4e Displays and prints the current document with the paper oriented horizontally.
2b cui%2Fui%2Fpageformatpage%2FcheckbuttonVert 0 
2c cui%2Fui%2Fpageformatpage%2FcomboTextFlowBox 40 Select the text direction that you want to use in your document.
2a cui%2Fui%2Fpageformatpage%2FcomboPaperTray ea Select the paper source for your printer. If you want, you can assign different paper trays to different page styles. For example, assign a different tray to the First Page style and load the tray with your company's letterhead paper.
28 cui%2Fui%2Fpageformatpage%2FspinMargLeft e7 Enter the amount of space to leave between the left edge of the page and the document text. If you are using the Mirrored page layout, enter the amount of space to leave between the inner text margin and the inner edge of the page.
29 cui%2Fui%2Fpageformatpage%2FcheckAdaptBox 86 Resizes the drawing objects so that they fit on the paper format that you select. The arrangement of the drawing objects is preserved.
2e cui%2Fui%2Fpageformatpage%2FcomboRegisterStyle 0 
27 cui%2Fui%2Fpageformatpage%2FspinMargTop 5c Enter the amount of space to leave between the upper edge of the page and the document text.
29 cui%2Fui%2Fpageformatpage%2FspinMargRight e8 Enter the amount of space to leave between the right edge of the page and the document text. If you are using the Mirrored page layout, enter the amount of space to leave between the outer text margin and the outer edge of the page.
2a svx%2Fui%2Fheadfootformatpage%2FbuttonEdit 0 
2a svx%2Fui%2Fheadfootformatpage%2FbuttonMore 4d Defines a border, a background color, or a background pattern for the header.
2b svx%2Fui%2Fheadfootformatpage%2FcheckSameFP 30 First and even/odd pages share the same content.
2b svx%2Fui%2Fheadfootformatpage%2FcheckSameLR 2a Even and odd pages share the same content.
2d svx%2Fui%2Fheadfootformatpage%2FcheckFooterOn 28 Adds a header to the current page style.
2f svx%2Fui%2Fheadfootformatpage%2FcheckDynSpacing 76 Overrides the Spacing setting, and allows the header to expand into the area between the header and the document text.
2c svx%2Fui%2Fheadfootformatpage%2FcheckAutofit 51 Automatically adjusts the height of the header to fit the content that you enter.
2c svx%2Fui%2Fheadfootformatpage%2FHFFormatPage 78 Adds a header to the current page style. A header is an area in the top page margin, where you can add text or graphics.
2a svx%2Fui%2Fheadfootformatpage%2FspinHeight 2e Enter the height that you want for the header.
2c svx%2Fui%2Fheadfootformatpage%2FspinMargLeft 65 Enter the amount of space to leave between the left edge of the page and the left edge of the header.
2d svx%2Fui%2Fheadfootformatpage%2FspinMargRight 67 Enter the amount of space to leave between the right edge of the page and the right edge of the header.
2b svx%2Fui%2Fheadfootformatpage%2FspinSpacing 80 Enter the amount of space that you want to maintain between the bottom edge of the header and the top edge of the document text.
15 SC_HID_SC_FOOTER_EDIT 18 Add or edit footer text.
32 SVX%3APUSHBUTTON%3ARID_SVXPAGE_FOOTER%3ABTN_EXTRAS 4d Defines a border, a background color, or a background pattern for the footer.
2f SVX%3ACHECKBOX%3ARID_SVXPAGE_FOOTER%3ACB_SHARED 2a Even and odd pages share the same content.
12 HID_SC_FOOTER_EDIT 0 
2f SVX%3ACHECKBOX%3ARID_SVXPAGE_FOOTER%3ACB_TURNON 28 Adds a footer to the current page style.
35 SVX%3ACHECKBOX%3ARID_SVXPAGE_FOOTER%3ACB_SHARED_FIRST 30 First and even/odd pages share the same content.
11 HID_FORMAT_FOOTER 7b Adds a footer to the current page style. A footer is an area in the bottom page margin, where you can add text or graphics.
33 SVX%3AMETRICFIELD%3ARID_SVXPAGE_FOOTER%3AED_RMARGIN 67 Enter the amount of space to leave between the right edge of the page and the right edge of the footer.
30 SVX%3AMETRICFIELD%3ARID_SVXPAGE_FOOTER%3AED_DIST 80 Enter the amount of space that you want to maintain between the bottom edge of the document text and the top edge of the footer.
32 SVX%3AMETRICFIELD%3ARID_SVXPAGE_FOOTER%3AED_HEIGHT 29 Enter the height you want for the footer.
33 SVX%3AMETRICFIELD%3ARID_SVXPAGE_FOOTER%3AED_LMARGIN 65 Enter the amount of space to leave between the left edge of the page and the left edge of the footer.
2d SVX_CHECKBOX_RID_SVXPAGE_FOOTER_CB_DYNSPACING 71 Overrides the Spacing setting and allows the footer to expand into the area between the footer and document text.
33 SVX%3ACHECKBOX%3ARID_SVXPAGE_FOOTER%3ACB_HEIGHT_DYN 4c Automatically adjusts the height of the footer to fit the content you enter.
1b .uno%3AChangeCaseToKatakana 3d Changes the selected Asian characters to Katakana characters.
1b .uno%3AChangeCaseToHiragana 3d Changes the selected Asian characters to Hiragana characters.
1c .uno%3AChangeCaseToFullWidth 3f Changes the selected Asian characters to full width characters.
18 .uno%3AChangeCaseToLower 40 Changes the selected western characters to lowercase characters.
1a SID_TRANSLITERATE_SENTENCE 56 Changes the first letter of the selected western characters to an uppercase character.
1f .uno%3AChangeCaseToSentenceCase 56 Changes the first letter of the selected western characters to an uppercase character.
18 .uno%3ATransliterateMenu 88 Changes the case of characters in the selection. If the cursor is within a word and no text is selected, then the word is the selection.
18 SID_TRANSLITERATE_TOGGLE 30 Toggles case of all selected western characters.
1c SID_TRANSLITERATE_CAPITALIZE 67 Changes the first character of every word of the selected western characters to an uppercase character.
1c .uno%3AChangeCaseToTitleCase 67 Changes the first character of every word of the selected western characters to an uppercase character.
1d .uno%3AChangeCaseToToggleCase 30 Toggles case of all selected western characters.
18 .uno%3AChangeCaseToUpper 40 Changes the selected western characters to uppercase characters.
1c .uno%3AChangeCaseToHalfWidth 3f Changes the selected Asian characters to half-width characters.
2c svx%2Fui%2Fasianphoneticguidedialog%2Fstyles 60 Opens the Styles and Formatting window where you can select a character style for the ruby text.
2d svx%2Fui%2Fasianphoneticguidedialog%2Fstylelb 2b Select a character style for the ruby text.
30 svx%2Fui%2Fasianphoneticguidedialog%2Fpositionlb 2d Select where you want to place the ruby text.
11 .uno%3ARubyDialog 54 Allows you to add comments above Asian characters to serve as a pronunciation guide.
2d svx%2Fui%2Fasianphoneticguidedialog%2FLeft4ED 82 Displays the base text that you selected in the current file. If you want, you can modify the base text by entering new text here.
2e svx%2Fui%2Fasianphoneticguidedialog%2FRight4ED 4f Enter the text that you want to use as a pronunciation guide for the base text.
2e svx%2Fui%2Fasianphoneticguidedialog%2Fadjustlb 32 Select the horizontal alignment for the Ruby text.
15 .uno%3AAlignFrameMenu 34 Aligns selected objects with respect to one another.
10 .uno%3AAlignLeft a1 Aligns the left edges of the selected objects. If only one object is selected in Draw or Impress, the left edge of the object is aligned to the left page margin.
1c .uno%3AAlignHorizontalCenter a7 Horizontally centers the selected objects. If only one object is selected in Draw or Impress, the center of the object is aligned to the horizontal center of the page.
11 .uno%3AAlignRight a4 Aligns the right edges of the selected objects. If only one object is selected in Impress or Draw, the right edge of the object is aligned to the right page margin.
f .uno%3AAlignTop ab Vertically aligns the top edges of the selected objects. If only one object is selected in Draw or Impress, the top edge of the object is aligned to the upper page margin.
1a .uno%3AAlignVerticalCenter a3 Vertically centers the selected objects. If only one object is selected in Draw or Impress, the center of the object is aligned to the vertical center of the page.
12 .uno%3AAlignBottom b1 Vertically aligns the bottom edges of the selected objects. If only one object is selected in Draw or Impress, the bottom edge of the object is aligned to the lower page margin.
10 .uno%3AAlignDown b1 Vertically aligns the bottom edges of the selected objects. If only one object is selected in Draw or Impress, the bottom edge of the object is aligned to the lower page margin.
f .uno%3ALeftPara 39 Aligns the selected paragraph(s) to the left page margin.
10 .uno%3ARightPara 3a Aligns the selected paragraph(s) to the right page margin.
11 .uno%3ACenterPara 2e Centers the selected paragraph(s) on the page.
12 .uno%3AJustifyPara cd Aligns the selected paragraph(s) to the left and the right page margins. If you want, you can also specify the alignment options for the last line of a paragraph by choosing Format - Paragraph - Alignment.
11 .uno%3AMergeCells 45 Combines the contents of the selected table cells into a single cell.
10 .uno%3ASplitCell 65 Splits the cell or group of cells horizontally or vertically into the number of cells that you enter.
25 cui%2Fui%2Fsplitcellsdialog%2Fcountnf 55 Enter the number of rows or columns that you want to split the selected cell(s) into.
22 cui%2Fui%2Fsplitcellsdialog%2Fvert 63 Splits the selected cell(s) into the number of columns that you specify in the Split cell into box.
22 cui%2Fui%2Fsplitcellsdialog%2Fhori 60 Splits the selected cell(s) into the number of rows that you specify in the Split cell into box.
22 cui%2Fui%2Fsplitcellsdialog%2Fprop 27 Splits cells into rows of equal height.
12 .uno%3ACellVertTop 3c Aligns the contents of the cell to the top edge of the cell.
15 .uno%3ACellVertCenter 44 Centers the contents of the cell between top and bottom of the cell.
15 .uno%3ACellVertBottom 3f Aligns the contents of the cell to the bottom edge of the cell.
b .uno%3ABold 9c Makes the selected text bold. If the cursor is in a word, the entire word is made bold. If the selection or word is already bold, the formatting is removed.
d .uno%3AItalic a2 Makes the selected text italic. If the cursor is in a word, the entire word is made italic. If the selection or word is already italic, the formatting is removed.
16 .uno%3AUnderlineDouble 2c Underlines the selected text with two lines.
10 .uno%3AUnderline 39 Underlines or removes underlining from the selected text.
10 .uno%3AStrikeout 57 Draws a line through the selected text, or if the cursor is in a word, the entire word.
f .uno%3AShadowed 56 Adds a shadow to the selected text, or if the cursor is in a word, to the entire word.
15 .uno%3ADistributeRows 60 Adjusts the height of the selected rows to match the height of the tallest row in the selection.
12 .uno%3ASuperScript 52 Reduces the font size of the selected text and raises the text above the baseline.
10 .uno%3ASubScript 52 Reduces the font size of the selected text and lowers the text below the baseline.
11 .uno%3ASpacePara1 52 Applies single line spacing to the current paragraph. This is the default setting.
12 .uno%3ASpacePara15 45 Sets the line spacing of the current paragraph to one and half lines.
11 .uno%3ASpacePara2 3c Sets the line spacing of the current paragraph to two lines.
18 .uno%3ADistributeColumns 63 Adjusts the width of the selected columns to match the width of the widest column in the selection.
1f sfx%2Fui%2Fnewstyle%2Fstylename 1f Enter a name for the new Style.
2b modules%2Fswriter%2Fui%2Fstringinput%2Fedit 37 Enter a name for the new AutoFormat, and then click OK.
18 HID_SD_NAMEDIALOG_OBJECT 50 Enter a name for the selected object. The name will be visible in the Navigator.
13 .uno%3ARenameObject 60 Assigns a name to the selected object, so that you can quickly find the object in the Navigator.
35 cui%2Fui%2Fobjecttitledescdialog%2Fobject_title_entry 7c Enter a title text. This short name is visible as an alternative tag in HTML format. Accessibility tools can read this text.
2d cui%2Fui%2Fobjecttitledescdialog%2Fdesc_entry e3 Enter a description text. The long description text can be entered to describe a complex object or group of objects to users with screen reader software. The description is visible as an alternative tag for accessibility tools.
38 cui%2Fui%2Fobjecttitledescdialog%2FObjectTitleDescDialog 9c Assigns a title and a description to the selected object. These are accessible for accessibility tools and as alternative tags when you export the document.
1d .uno%3AObjectTitleDescription 9c Assigns a title and a description to the selected object. These are accessible for accessibility tools and as alternative tags when you export the document.
11 .uno%3AFormatLine 32 Sets the formatting options for the selected line.
26 cui%2Fui%2Flinetabpage%2FLB_EDGE_STYLE 91 Select the shape to be used at the corners of the line. In case of a small angle between lines, a mitered shape is replaced with a beveled shape.
26 cui%2Fui%2Flinetabpage%2FLB_LINE_STYLE 2b Select the line style that you want to use.
28 cui%2Fui%2Flinetabpage%2FCBX_SYNCHRONIZE 8a Automatically updates both arrowhead settings when you enter a different width, select a different arrowhead style,or center an arrowhead.
27 cui%2Fui%2Flinetabpage%2FTSB_CENTER_END 4e Places the center of the arrowhead(s) on the endpoint(s) of the selected line.
25 cui%2Fui%2Flinetabpage%2FLB_END_STYLE 41 Select the arrowhead that you want to apply to the selected line.
2b cui%2Fui%2Flinetabpage%2FMTR_FLD_LINE_WIDTH 99 Select the width for the line. You can append a measurement unit. A zero line width results in a hairline with a width of one pixel of the output medium.
29 cui%2Fui%2Flinetabpage%2FMF_SYMBOL_HEIGHT 1e Enter a height for the symbol.
28 cui%2Fui%2Flinetabpage%2FCB_SYMBOL_RATIO 53 Maintains the proportions of the symbol when you enter a new height or width value.
25 cui%2Fui%2Flinetabpage%2FLB_CAP_STYLE 52 Select the style of the line end caps. The caps are added to inner dashes as well.
21 cui%2Fui%2Flinetabpage%2FLB_COLOR 1c Select a color for the line.
2a cui%2Fui%2Flinetabpage%2FMTR_FLD_END_WIDTH 20 Enter a width for the arrowhead.
24 cui%2Fui%2Flinetabpage%2FLineTabPage 93 Set the formatting options for the selected line or the line that you want to draw. You can also add arrowheads to a line, or change chart symbols.
2d cui%2Fui%2Flinetabpage%2FMTR_LINE_TRANSPARENT 71 Enter the transparency of the line, where 100% corresponds to completely transparent and 0% to completely opaque.
29 cui%2Fui%2Flinetabpage%2FMB_SYMBOL_BITMAP 3b Select the symbol style that you want to use in your chart.
28 cui%2Fui%2Flinetabpage%2FMF_SYMBOL_WIDTH 1d Enter a width for the symbol.
26 cui%2Fui%2Flinestyletabpage%2FBTN_SAVE 4b Saves the current list of line styles, so that you can load it again later.
26 cui%2Fui%2Flinestyletabpage%2FBTN_LOAD 1e Imports a list of line styles.
27 cui%2Fui%2Flinestyletabpage%2FLB_TYPE_2 38 Select the combination of dashes and dots that you want.
2b cui%2Fui%2Flinestyletabpage%2FLB_LINESTYLES 31 Select the style of line that you want to create.
27 cui%2Fui%2Flinestyletabpage%2FNUM_FLD_2 50 Enter the number of times that you want a dot or a dash to appear in a sequence.
c HID_LINE_DEF 2c Edit or create dashed or dotted line styles.
2e cui%2Fui%2Flinestyletabpage%2FMTR_FLD_LENGTH_2 1d Enter the length of the dash.
2e cui%2Fui%2Flinestyletabpage%2FMTR_FLD_DISTANCE 48 Enter the amount of space that you want to leave between dots or dashes.
25 cui%2Fui%2Flinestyletabpage%2FBTN_ADD 34 Creates a new line style using the current settings.
22 cui%2Fui%2Fnamedialog%2FNameDialog d Enter a name.
28 cui%2Fui%2Flinestyletabpage%2FBTN_MODIFY 8a Updates the selected line style using the current settings. To change the name of the selected line style, enter a new name when prompted.
2d cui%2Fui%2Flinestyletabpage%2FCBX_SYNCHRONIZE 45 Automatically adjusts the entries relative to the length of the line.
25 cui%2Fui%2Flineendstabpage%2FBTN_SAVE 46 Saves the current list of arrow styles, so that you can load it later.
25 cui%2Fui%2Flineendstabpage%2FBTN_LOAD 1f Imports a list of arrow styles.
27 cui%2Fui%2Flineendstabpage%2FBTN_MODIFY 2d Changes the name of the selected arrow style.
28 cui%2Fui%2Flineendstabpage%2FLineEndPage 1c Edit or create arrow styles.
25 cui%2Fui%2Flineendstabpage%2FEDT_NAME 2e Displays the name of the selected arrow style.
28 cui%2Fui%2Flineendstabpage%2FLB_LINEENDS 39 Choose a predefined arrow style symbol from the list box.
24 cui%2Fui%2Flineendstabpage%2FBTN_ADD 5d To define a custom arrow style, select a drawing object in the document, and then click here.
11 .uno%3AFormatArea 38 Sets the fill properties of the selected drawing object.
2c cui%2Fui%2Fareatabpage%2FLB_HATCHBCKGRDCOLOR 57 Click the color that you want to use as a background for the selected hatching pattern.
27 cui%2Fui%2Fareatabpage%2FCB_HATCHBCKGRD 6d Applies a background color to the hatching pattern. Select this checkbox, and then click a color in the list.
27 cui%2Fui%2Fareatabpage%2FMTR_FLD_OFFSET 33 Enter the percentage to offset the rows or columns.
23 cui%2Fui%2Fareatabpage%2FRBT_COLUMN 61 Vertically offsets the original bitmap relative to the bitmap tiles by the amount that you enter.
24 cui%2Fui%2Fareatabpage%2FTSB_STRETCH 5a Stretches the bitmap to fill the selected object. To use this feature, clear the Tile box.
29 cui%2Fui%2Fareatabpage%2FMTR_FLD_Y_OFFSET 30 Enter the vertical offset for tiling the bitmap.
27 cui%2Fui%2Fareatabpage%2FMTR_FLD_Y_SIZE 1e Enter a height for the bitmap.
2a cui%2Fui%2Fareatabpage%2FNUM_FLD_STEPCOUNT 4a Enter the number of steps for blending the two end colors of the gradient.
20 cui%2Fui%2Fareatabpage%2FRBT_ROW 63 Horizontally offsets the original bitmap relative to the bitmap tiles by the amount that you enter.
21 cui%2Fui%2Fareatabpage%2FTSB_TILE 2d Tiles the bitmap to fill the selected object.
22 cui%2Fui%2Fareatabpage%2FTSB_SCALE fd Rescales the bitmap relative to the size of the selected object by the percentage values that you enter in the Width and Height boxes . Clear this checkbox to resize the selected object with the measurements that you enter in the Width and Height boxes.
26 cui%2Fui%2Fareatabpage%2FTSB_STEPCOUNT 5d Automatically determines the number of steps for blending the two end colors of the gradient.
10 .uno%3AFillStyle 4e Select the type of fill that you want to apply to the selected drawing object.
24 cui%2Fui%2Fareatabpage%2FAreaTabPage 35 Set the fill options for the selected drawing object.
29 cui%2Fui%2Fareatabpage%2FMTR_FLD_X_OFFSET 32 Enter the horizontal offset for tiling the bitmap.
22 cui%2Fui%2Fareatabpage%2FLB_BITMAP 3d Click the fill that you want to apply to the selected object.
27 cui%2Fui%2Fareatabpage%2FMTR_FLD_X_SIZE 1d Enter a width for the bitmap.
24 cui%2Fui%2Fareatabpage%2FLB_GRADIENT 47 Fills the selected object with the gradient that you click in the list.
21 cui%2Fui%2Fareatabpage%2FLB_COLOR 44 Fills the selected object with the color that you click in the list.
25 cui%2Fui%2Fareatabpage%2FTSB_ORIGINAL 8d Retains the original size of the bitmap when filling the selected object. To resize the bitmap, clear this checkbox, and then click Relative.
24 cui%2Fui%2Fareatabpage%2FLB_HATCHING c9 Fills the selected object with the hatching pattern that you click in the list. To apply a background color to the hatching pattern, select the Background color box, and then click a color in the list.
1e cui%2Fui%2Fgradientpage%2Fsave 43 Saves the current list of gradients, so that you can load it later.
1e cui%2Fui%2Fgradientpage%2Fload 23 Load a different list of gradients.
1d cui%2Fui%2Fgradientpage%2Fadd 6f Adds a custom gradient to the current list. Specify the properties of your gradient, and then click this button
24 cui%2Fui%2Fgradientpage%2Fcenterxmtr cc Enter the horizontal offset for the gradient, where 0% corresponds to the current horizontal location of the endpoint color in the gradient. The endpoint color is the color that is selected in the To box.
20 cui%2Fui%2Fgradientpage%2Fmodify 80 Applies the current gradient properties to the selected gradient. If you want, you can save the gradient under a different name.
24 cui%2Fui%2Fgradientpage%2Fcenterymtr c8 Enter the vertical offset for the gradient, where 0% corresponds to the current vertical location of the endpoint color in the gradient. The endpoint color is the color that is selected in the To box.
28 cui%2Fui%2Fgradientpage%2Fgradienttypelb 2b Select the gradient that you want to apply.
26 cui%2Fui%2Fgradientpage%2FGradientPage 42 Set the properties of a gradient, or save and load gradient lists.
22 cui%2Fui%2Fgradientpage%2Fanglemtr 31 Enter a rotation angle for the selected gradient.
26 cui%2Fui%2Fgradientpage%2Fcolorfrommtr 72 Enter the intensity for the color in the From box, where 0% corresponds to black, and 100 % to the selected color.
25 cui%2Fui%2Fgradientpage%2Fgradientslb 3d Select the type of gradient that you want to apply or create.
24 cui%2Fui%2Fgradientpage%2Fcolortomtr 70 Enter the intensity for the color in the To box, where 0% corresponds to black, and 100 % to the selected color.
25 cui%2Fui%2Fgradientpage%2Fcolorfromlb 37 Select a color for the beginning point of the gradient.
23 cui%2Fui%2Fgradientpage%2Fbordermtr 9c Enter the amount by which you want to adjust the area of the endpoint color on the gradient. The endpoint color is the color that is selected in the To box.
23 cui%2Fui%2Fgradientpage%2Fcolortolb 30 Select a color for the endpoint of the gradient.
1f cui%2Fui%2Fhatchpage%2Fanglemtr 54 Enter the rotation angle for the hatch lines, or click a position in the angle grid.
1f cui%2Fui%2Fhatchpage%2Fanglectl 4e Click a position in the grid to define the rotation angle for the hatch lines.
22 cui%2Fui%2Fhatchpage%2Fdistancemtr 48 Enter the amount of space that you want to have between the hatch lines.
1b cui%2Fui%2Fhatchpage%2Fload 2c Loads a different list of hatching patterns.
20 cui%2Fui%2Fhatchpage%2FHatchPage 4a Set the properties of a hatching pattern, or save and load hatching lists.
21 cui%2Fui%2Fhatchpage%2Flinetypelb 34 Select the type of hatch lines that you want to use.
22 cui%2Fui%2Fhatchpage%2Flinecolorlb 24 Select the color of the hatch lines.
22 cui%2Fui%2Fhatchpage%2Fhatchingslb 6c Lists the available hatching patterns. Click the hatching pattern that you want to apply, and then click OK.
1b cui%2Fui%2Fhatchpage%2Fsave 4b Saves the current list of hatching patterns, so that you can load it later.
1a cui%2Fui%2Fhatchpage%2Fadd 80 Adds a custom hatching pattern to the current list. Specify the properties of your hatching pattern, and then click this button.
1d cui%2Fui%2Fhatchpage%2Fmodify 87 Applies the current hatching properties to the selected hatching pattern. If you want, you can save the pattern under a different name.
23 cui%2Fui%2Fbitmaptabpage%2FBTN_SAVE 41 Saves the current list of bitmaps, so that you can load it later.
25 cui%2Fui%2Fbitmaptabpage%2FBTN_IMPORT 80 Locate the bitmap that you want to import, and then click Open. The bitmap is added to the end of the list of available bitmaps.
25 cui%2Fui%2Fbitmaptabpage%2FBTN_MODIFY 97 Replaces a bitmap that you created in the Pattern Editor with the current bitmap pattern. If you want, you can save the pattern under a different name.
22 cui%2Fui%2Fbitmaptabpage%2FBTN_ADD 49 Adds a bitmap that you created in the Pattern Editor to the current list.
23 cui%2Fui%2Fbitmaptabpage%2FBTN_LOAD 22 Loads a different list of bitmaps.
28 cui%2Fui%2Fbitmaptabpage%2FBitmapTabPage 95 Select a bitmap that you want to use as a fill pattern, or create your own pixel pattern. You can also import bitmaps, and save or load bitmap lists.
2e cui%2Fui%2Fbitmaptabpage%2FLB_BACKGROUND_COLOR 32 Select a background color for your bitmap pattern.
23 cui%2Fui%2Fbitmaptabpage%2FLB_COLOR 54 Select a foreground color, and then click in the grid to add a pixel to the pattern.
25 cui%2Fui%2Fbitmaptabpage%2FLB_BITMAPS 5b Select a bitmap in the list, and then click OK to apply the pattern to the selected object.
11 .uno%3AFillShadow c9 Adds a shadow to the selected object. If the object already has a shadow, the shadow is removed. If you click this icon when no object is selected, the shadow is added to the next object that you draw.
f HID_AREA_SHADOW 55 Add a shadow to the selected drawing object, and define the properties of the shadow.
34 SVX%3ALISTBOX%3ARID_SVXPAGE_SHADOW%3ALB_SHADOW_COLOR 1e Select a color for the shadow.
39 SVX%3AMETRICFIELD%3ARID_SVXPAGE_SHADOW%3AMTR_FLD_DISTANCE 52 Enter the distance that you want the shadow to be offset from the selected object.
3f SVX%3AMETRICFIELD%3ARID_SVXPAGE_SHADOW%3AMTR_SHADOW_TRANSPARENT 64 Enter a percentage from 0% (opaque) to 100% (transparent) to specify the transparency of the shadow.
38 SVX%3ATRISTATEBOX%3ARID_SVXPAGE_SHADOW%3ATSB_SHOW_SHADOW 2d Adds a shadow to the selected drawing object.
11 HID_TPSHADOW_CTRL 28 Click where you want to cast the shadow.
33 cui%2Fui%2Ftransparencytabpage%2FMTR_TRGR_END_VALUE 74 Enter a transparency value for the endpoint of the gradient, where 0% is fully opaque and 100% is fully transparent.
35 cui%2Fui%2Ftransparencytabpage%2FMTR_TRGR_START_VALUE 7b Enter a transparency value for the beginning point of the gradient, where 0% is fully opaque and 100% is fully transparent.
30 cui%2Fui%2Ftransparencytabpage%2FMTR_TRANSPARENT 6e Adjusts the transparency of the current fill color. Enter a number between 0% (opaque) and 100% (transparent).
32 cui%2Fui%2Ftransparencytabpage%2FMTR_TRGR_CENTER_X 2d Enter the horizontal offset for the gradient.
32 cui%2Fui%2Ftransparencytabpage%2FMTR_TRGR_CENTER_Y 2b Enter the vertical offset for the gradient.
31 cui%2Fui%2Ftransparencytabpage%2FRBT_TRANS_LINEAR 8c Turns on color transparency. Select this option, and then enter a number in the box, where 0% is fully opaque and 100% is fully transparent.
2e cui%2Fui%2Ftransparencytabpage%2FRBT_TRANS_OFF 1d Turns off color transparency.
34 cui%2Fui%2Ftransparencytabpage%2FTransparencyTabPage 50 Set the transparency options for the fill that you apply to the selected object.
33 cui%2Fui%2Ftransparencytabpage%2FRBT_TRANS_GRADIENT 74 Applies a transparency gradient to the current fill color. Select this option, and then set the gradient properties.
37 cui%2Fui%2Ftransparencytabpage%2FLB_TRGR_GRADIENT_TYPES 40 Select the type of transparency gradient that you want to apply.
2f cui%2Fui%2Ftransparencytabpage%2FMTR_TRGR_ANGLE 28 Enter a rotation angle for the gradient.
30 cui%2Fui%2Ftransparencytabpage%2FMTR_TRGR_BORDER 6b Enter the amount by which you want to adjust the transparent area of the gradient. The default value is 0%.
29 cui%2Fui%2Ftextattrtabpage%2FCTL_POSITION 36 Click where you want to place the anchor for the text.
2c cui%2Fui%2Ftextattrtabpage%2FTSB_FIT_TO_SIZE 46 Resizes the text to fit the entire area of the drawing or text object.
28 cui%2Fui%2Ftextattrtabpage%2FMTR_FLD_TOP 77 Enter the amount of space to leave between the top edge of the drawing or text object and the upper border of the text.
30 cui%2Fui%2Ftextattrtabpage%2FTSB_AUTOGROW_HEIGHT 63 Expands the height of the object to the height of the text, if the object is smaller than the text.
2b cui%2Fui%2Ftextattrtabpage%2FMTR_FLD_BOTTOM 7a Enter the amount of space to leave between the bottom edge of the drawing or text object and the lower border of the text.
28 cui%2Fui%2Ftextattrtabpage%2FTSB_CONTOUR 54 Adapts the text flow so that it matches the contours of the selected drawing object.
2e cui%2Fui%2Ftextattrtabpage%2FTSB_WORDWRAP_TEXT 59 Wraps the text that you add after double-clicking a custom shape to fit inside the shape.
2b cui%2Fui%2Ftextattrtabpage%2FTSB_FULL_WIDTH 48 Anchors the text to the full width of the drawing object or text object.
2f cui%2Fui%2Ftextattrtabpage%2FTSB_AUTOGROW_WIDTH 61 Expands the width of the object to the width of the text, if the object is smaller than the text.
2f cui%2Fui%2Ftextattrtabpage%2FTextAttributesPage 59 Sets the layout and anchoring properties for text in the selected drawing or text object.
2e cui%2Fui%2Ftextattrtabpage%2FTSB_AUTOGROW_SIZE 56 Resizes a custom shape to fit the text that you enter after double-clicking the shape.
29 cui%2Fui%2Ftextattrtabpage%2FMTR_FLD_LEFT 77 Enter the amount of space to leave between the left edge of the drawing or text object and the left border of the text.
2a cui%2Fui%2Ftextattrtabpage%2FMTR_FLD_RIGHT 79 Enter the amount of space to leave between the right edge of the drawing or text object and the right border of the text.
16 .uno%3ATransformDialog 37 Resizes, moves, rotates, or slants the selected object.
2e cui%2Fui%2Fpossizetabpage%2FTSB_AUTOGROW_WIDTH 61 Expands the width of the object to the width of the text, if the object is smaller than the text.
2f cui%2Fui%2Fpossizetabpage%2FTSB_AUTOGROW_HEIGHT 63 Expands the height of the object to the height of the text, if the object is smaller than the text.
27 cui%2Fui%2Fpossizetabpage%2FCTL_POSRECT f2 Click a base point in the grid, and then enter the amount that you want to shift the object relative to the base point that you selected in the Position Y and Position X boxes. The base points correspond to the selection handles on an object.
29 cui%2Fui%2Fpossizetabpage%2FMTR_FLD_POS_X 6f Enter the horizontal distance that you want to move the object relative to the base point selected in the grid.
29 cui%2Fui%2Fpossizetabpage%2FMTR_FLD_POS_Y 6d Enter the vertical distance that you want to move the object relative to the base point selected in the grid.
2a cui%2Fui%2Fpossizetabpage%2FTSB_POSPROTECT 44 Prevents changes to the position or the size of the selected object.
2b cui%2Fui%2Fpossizetabpage%2FPositionAndSize 25 Resizes or moves the selected object.
28 cui%2Fui%2Fpossizetabpage%2FCTL_SIZERECT 7d Click a base point in the grid, and then enter the new size dimensions for the selected object in the Width and Height boxes.
29 cui%2Fui%2Fpossizetabpage%2FMTR_FLD_WIDTH 26 Enter a width for the selected object.
2a cui%2Fui%2Fpossizetabpage%2FMTR_FLD_HEIGHT 27 Enter a height for the selected object.
25 cui%2Fui%2Fpossizetabpage%2FCBX_SCALE 3a Maintains proportions when you resize the selected object.
2b cui%2Fui%2Fpossizetabpage%2FTSB_SIZEPROTECT 26 Prevents you from resizing the object.
26 cui%2Fui%2Frotationtabpage%2FCTL_ANGLE 3f Click to specify the rotation angle in multiples of 45 degrees.
25 cui%2Fui%2Frotationtabpage%2FNF_ANGLE 48 Enter the number of degrees that you want to rotate the selected object.
25 cui%2Fui%2Frotationtabpage%2FRotation 1c Rotates the selected object.
2a cui%2Fui%2Frotationtabpage%2FMTR_FLD_POS_X 50 Enter the horizontal distance from the left edge of the page to the pivot point.
2a cui%2Fui%2Frotationtabpage%2FMTR_FLD_POS_Y 4d Enter the vertical distance from the top edge of the page to the pivot point.
25 cui%2Fui%2Frotationtabpage%2FCTL_RECT 2e Click where you want to place the pivot point.
2d cui%2Fui%2Fslantcornertabpage%2FMTR_FLD_ANGLE 22 Enter the angle of the slant axis.
2e cui%2Fui%2Fslantcornertabpage%2FMTR_FLD_RADIUS 49 Enter the radius of the circle that you want to use to round the corners.
34 cui%2Fui%2Fslantcornertabpage%2FSlantAndCornerRadius 4a Slants the selected object, or rounds the corners of a rectangular object.
21 cui%2Fui%2Fcalloutpage%2Fvalueset 47 Click the Callout style that you want to apply to the selected callout.
20 cui%2Fui%2Fcalloutpage%2Fspacing 6a Enter the amount of space that you want to leave between the end of the callout line, and the callout box.
20 cui%2Fui%2Fcalloutpage%2Foptimal 3d Click here to display a single-angled line in an optimal way.
21 cui%2Fui%2Fcalloutpage%2Fposition 56 Select where you want to extend the callout line from, in relation to the callout box.
1f cui%2Fui%2Fcalloutpage%2Flength 73 Enter the length of the callout line segment that extends from the callout box to the inflection point of the line.
f .uno%3AFlipMenu 36 Flips the selected object horizontally, or vertically.
11 .uno%3AMirrorVert 3b Flips the selected object(s) vertically from top to bottom.
1d .uno%3AObjectMirrorHorizontal 3d Flips the selected object(s) horizontally from left to right.
15 .uno%3AObjectPosition 35 Changes the stacking order of the selected object(s).
13 .uno%3ABringToFront 64 Moves the selected object to the top of the stacking order, so that it is in front of other objects.
17 .uno%3AObjectForwardOne 5a Moves the selected object up one level, so that it is closer to top of the stacking order.
e .uno%3AForward 5a Moves the selected object up one level, so that it is closer to top of the stacking order.
14 .uno%3AObjectBackOne 63 Moves the selected object down one level, so that it is closer to the bottom of the stacking order.
f .uno%3ABackward 63 Moves the selected object down one level, so that it is closer to the bottom of the stacking order.
11 .uno%3ASendToBack 66 Moves the selected object to the bottom of the stacking order, so that it is behind the other objects.
1c .uno%3ASetObjectToForeground 2b Moves the selected object in front of text.
1c .uno%3ASetObjectToBackground 26 Moves the selected object behind text.
11 .uno%3AAnchorMenu 33 Sets the anchoring options for the selected object.
16 .uno%3ASetAnchorToPage 2e Anchors the selected item to the current page.
16 .uno%3ASetAnchorToPara 33 Anchors the selected item to the current paragraph.
16 .uno%3ASetAnchorToCell 24 Anchors the selected item to a cell.
17 .uno%3ASetAnchorToFrame 33 Anchors the selected item to the surrounding frame.
16 .uno%3ASetAnchorToChar c0 Anchors the selected item as a character in the current text. If the height of the selected item is greater than the current font size, the height of the line containing the item is increased.
16 .uno%3ASetAnchorAsChar c0 Anchors the selected item as a character in the current text. If the height of the selected item is greater than the current font size, the height of the line containing the item is increased.
1d .uno%3AToggleObjectBezierMode 39 Lets you change the shape of the selected drawing object.
26 svx%2Fui%2Fdockingfontwork%2Fdistancey 53 Enter the vertical distance between the text characters and the edge of the shadow.
26 svx%2Fui%2Fdockingfontwork%2Fdistancex 55 Enter the horizontal distance between the text characters and the edge of the shadow.
25 svx%2Fui%2Fdockingfontwork%2Fvertical 9c Adds a shadow to the text in the selected object. Click this button, and then enter the dimensions of the shadow in the Distance X and the Distance Y boxes.
22 svx%2Fui%2Fdockingfontwork%2Fcolor 23 Select a color for the text shadow.
25 svx%2Fui%2Fdockingfontwork%2Fnoshadow 38 Removes the shadow effects that you applied to the text.
23 svx%2Fui%2Fdockingfontwork%2Findent 6d Enter the amount of space to leave between the beginning of the text baseline, and the beginning of the text.
22 svx%2Fui%2Fdockingfontwork%2Fslant a2 Adds a slant shadow to the text in the selected object. Click this button, and then enter the dimensions of the shadow in the Distance X and the Distance Y boxes.
24 svx%2Fui%2Fdockingfontwork%2Fcontour 46 Shows or hides the text baseline, or the edges of the selected object.
25 svx%2Fui%2Fdockingfontwork%2Fdistance 75 Enter the amount of space that you want to leave between the text baseline and the base of the individual characters.
25 svx%2Fui%2Fdockingfontwork%2Fautosize 38 Resizes the text to fit the length of the text baseline.
20 svx%2Fui%2Fdockingfontwork%2Foff 1c Removes baseline formatting.
23 svx%2Fui%2Fdockingfontwork%2Fslantx 36 Horizontally slants the characters in the text object.
23 svx%2Fui%2Fdockingfontwork%2Fslanty 34 Vertically slants the characters in the text object.
28 svx%2Fui%2Fdockingfontwork%2Ftextcontour 44 Shows or hides the borders of the individual characters in the text.
22 svx%2Fui%2Fdockingfontwork%2Fright 36 Aligns the text to the right end of the text baseline.
16 HID_FONTWORK_CTL_FORMS 42 Click the shape of the baseline that you want to use for the text.
f .uno%3AFontWork 66 Edits Fontwork effects of the selected object that has been created with the previous Fontwork dialog.
23 svx%2Fui%2Fdockingfontwork%2Fcenter 26 Centers the text on the text baseline.
23 svx%2Fui%2Fdockingfontwork%2Frotate 4c Uses the top or the bottom edge of the selected object as the text baseline.
24 svx%2Fui%2Fdockingfontwork%2Fupright 97 Uses the top or the bottom edge of the selected object as the text baseline and preserves the original vertical alignment of the individual characters.
21 svx%2Fui%2Fdockingfontwork%2Fleft 35 Aligns the text to the left end of the text baseline.
28 svx%2Fui%2Fdockingfontwork%2Forientation 9c Reverses the text flow direction, and flips the text horizontally or vertically. To use this command, you must first apply a different baseline to the text.
10 .uno%3AGroupMenu 61 Groups keep together selected objects, so that they can be moved or formatted as a single object.
12 .uno%3AFormatGroup 4a Groups the selected objects, so that they can be moved as a single object.
14 .uno%3AFormatUngroup 38 Breaks apart the selected group into individual objects.
11 .uno%3AEnterGroup a1 Opens the selected group, so that you can edit the individual objects. If the selected group contains nested group, you can repeat this command on the subgroups.
11 .uno%3ALeaveGroup 54 Exits the group, so that you can no longer edit the individual objects in the group.
25 cui%2Fui%2Ftextanimtabpage%2FTSB_AUTO c5 $[officename] automatically determines the amount of time to wait before repeating the effect. To manually assign the delay period, clear this checkbox, and then enter a value in the Automatic box.
2b cui%2Fui%2Ftextanimtabpage%2FMTR_FLD_AMOUNT 3b Enter the number of increments by which to scroll the text.
2a cui%2Fui%2Ftextanimtabpage%2FMTR_FLD_DELAY 3d Enter the amount of time to wait before repeating the effect.
26 cui%2Fui%2Ftextanimtabpage%2FTSB_PIXEL 23 Measures increment value in pixels.
25 cui%2Fui%2Ftextanimtabpage%2FBTN_DOWN 20 Scrolls text from top to bottom.
2c cui%2Fui%2Ftextanimtabpage%2FTSB_STOP_INSIDE 31 Text remains visible after the effect is applied.
26 cui%2Fui%2Ftextanimtabpage%2FBTN_RIGHT 20 Scrolls text from left to right.
26 cui%2Fui%2Ftextanimtabpage%2FLB_EFFECT 8f Select the animation effect that you want to apply to the text in the selected drawing object. To remove an animation effect, select No Effect.
2a cui%2Fui%2Ftextanimtabpage%2FTextAnimation 44 Adds an animation effect to the text in the selected drawing object.
28 cui%2Fui%2Ftextanimtabpage%2FTSB_ENDLESS 9a Plays the animation effect continuously. To specify the number of times to play the effect, clear this checkbox, and enter a number in the Continuous box.
23 cui%2Fui%2Ftextanimtabpage%2FBTN_UP 20 Scrolls text from bottom to top.
2d cui%2Fui%2Ftextanimtabpage%2FTSB_START_INSIDE 49 Text is visible and inside the drawing object when the effect is applied.
25 cui%2Fui%2Ftextanimtabpage%2FBTN_LEFT 20 Scrolls text from right to left.
2a cui%2Fui%2Ftextanimtabpage%2FNUM_FLD_COUNT 47 Enter the number of times that you want the animation effect to repeat.
30 modules%2Fscalc%2Fui%2Frowheightdialog%2Fdefault c1 Adjusts the row height to the size based on the default template. Existing contents may be shown vertically cropped. The height no longer increases automatically when you enter larger contents.
2e modules%2Fscalc%2Fui%2Frowheightdialog%2Fvalue 2a Enter the row height that you want to use.
38 modules%2Fscalc%2Fui%2Frowheightdialog%2FRowHeightDialog 3c Changes the height of the current row, or the selected rows.
2f modules%2Fscalc%2Fui%2Fcolwidthdialog%2Fdefault 41 Automatically adjusts the column width based on the current font.
2d modules%2Fscalc%2Fui%2Fcolwidthdialog%2Fvalue 2c Enter the column width that you want to use.
36 modules%2Fscalc%2Fui%2Fcolwidthdialog%2FColWidthDialog 41 Changes the width of the current column, or the selected columns.
2a cui%2Fui%2Fcellalignment%2FcheckHyphActive 3c Enables word hyphenation for text wrapping to the next line.
29 cui%2Fui%2Fcellalignment%2FcheckAsianMode 133 Aligns Asian characters one below the other in the selected cell(s). If the cell contains more than one line of text, the lines are converted to text columns that are arranged from right to left. Western characters in the converted text are rotated 90 degrees to the right. Asian characters are not rotated.
29 cui%2Fui%2Fcellalignment%2FcheckVertStack 17 Aligns text vertically.
25 cui%2Fui%2Fcellalignment%2Freferences 3b Specify the cell edge from which to write the rotated text.
26 cui%2Fui%2Fcellalignment%2FspinDegrees a2 Enter the rotation angle for the text in the selected cell(s). A positive number rotates the text to the left and a negative number rotates the text to the right.
13 .uno%3AAlignVCenter 2f Sets the text orientation of the cell contents.
11 .uno%3AAlignRight 2d Aligns the contents of the cell to the right.
11 .uno%3AAlignBlock 4a Aligns the contents of the cell to the left and to the right cell borders.
26 cui%2Fui%2Fcellalignment%2Fdialcontrol 2e Click in the dial to set the text orientation.
10 .uno%3AAlignLeft 2c Aligns the contents of the cell to the left.
28 cui%2Fui%2Fcellalignment%2FCellAlignPage 57 Sets the alignment options for the contents of the current cell, or the selected cells.
2c cui%2Fui%2Fcellalignment%2FcomboboxHorzAlign 53 Select the horizontal alignment option that you want to apply to the cell contents.
29 cui%2Fui%2Fcellalignment%2FspinIndentFrom 44 Indents from the left edge of the cell by the amount that you enter.
2c cui%2Fui%2Fcellalignment%2FcheckWrapTextAuto 66 Wraps text onto another line at the cell border. The number of lines depends on the width of the cell.
2c cui%2Fui%2Fcellalignment%2FcomboboxVertAlign 33 Aligns the cell contents to the bottom of the cell.
31 cui%2Fui%2Fcellalignment%2FcheckShrinkFitCellSize aa Reduces the apparent size of the font so that the contents of the cell fit into the current cell width. You cannot apply this command to a cell that contains line breaks.
f .uno%3AAlignTop 3e Aligns the contents of the cell to the upper edge of the cell.
1c SVX_HID_GRID_NUMBEROFRECORDS b7 Displays the number of records. For example, "Record 7 of 9(2)" indicates that two records (2) are selected in a table containing 9 records, and that the cursor is in record number 7.
17 SVX_HID_GRID_TRAVEL_NEW 2c Inserts a new record into the current table.
18 SVX_HID_GRID_TRAVEL_LAST 23 Go to the last record in the table.
18 SVX_HID_GRID_TRAVEL_NEXT 23 Go to the next record in the table.
1b DBACCESS_HID_CTL_TABBROWSER 87 Select database records. Drag-and-drop rows or cells to the document to insert contents. Drag-and-drop column headers to insert fields.
18 SVX_HID_GRID_TRAVEL_PREV 27 Go to the previous record in the table.
19 SVX_HID_GRID_TRAVEL_FIRST 24 Go to the first record in the table.
1c SVX_HID_GRID_TRAVEL_ABSOLUTE 4d Type the number of the record that you want to display, and then press Enter.
17 HID_BROWSER_TABLEFORMAT 1c Formats the selected row(s).
18 HID_BROWSER_COLUMNFORMAT 1f Formats the selected column(s).
f .uno%3AWindow3D 41 Specifies the properties of 3D object(s) in the current document.
29 svx%2Fui%2Fdocking3deffects%2Fdoublesided 60 Closes the shape of a 3D object that was created by extruding a freeform line (Convert - To 3D).
2b svx%2Fui%2Fdocking3deffects%2Finverthormals 19 Inverts the light source.
23 svx%2Fui%2Fdocking3deffects%2Fangle 45 Enter the angle in degrees to rotate the selected 3D rotation object.
29 svx%2Fui%2Fdocking3deffects%2Fscaleddepth 67 Enter the amount by which to increase or decrease the area of the front side of the selected 3D object.
22 svx%2Fui%2Fdocking3deffects%2Fhori 52 Enter the number of horizontal segments to use in the selected 3D rotation object.
26 svx%2Fui%2Fdocking3deffects%2Fdiagonal 52 Enter the amount by which you want to round the corners of the selected 3D object.
26 svx%2Fui%2Fdocking3deffects%2Fgeometry 108 Adjusts the shape of the selected 3D object. You can only modify the shape of a 3D object that was created by converting a 2D object. To convert a 2D object to 3D, select the object, right-click, and then choose Convert - To 3D, or Convert - To 3D Rotation Object.
22 svx%2Fui%2Fdocking3deffects%2Fveri 4f Enter the number of vertical segments to use in the selected 3D rotation object
29 svx%2Fui%2Fdocking3deffects%2Fobjspecific 80 Renders the 3D surface according to the shape of the object. For example, a circular shape is rendered with a spherical surface.
2e svx%2Fui%2Fdocking3deffects%2Fdoublesidedillum 8f Lights the object from the outside and the inside. To use an ambient light source, click this button, and then click the Invert Normals button.
22 svx%2Fui%2Fdocking3deffects%2Fflat 23 Renders the 3D surface as polygons.
23 svx%2Fui%2Fdocking3deffects%2Fdepth 67 Enter the extrusion depth for the selected 3D object. This option is not valid for 3D rotation objects.
27 svx%2Fui%2Fdocking3deffects%2Fspherical 1c Renders a smooth 3D surface.
23 svx%2Fui%2Fdocking3deffects%2Ffocal 81 Enter the focal length of the camera, where a small value corresponds to a "fisheye" lens, and a large value to a telephoto lens.
2c svx%2Fui%2Fdocking3deffects%2Frepresentation 3f Sets the shading and shadow options for the selected 3D object.
22 svx%2Fui%2Fdocking3deffects%2Fmode 135 Select the shading method that you want to use. Flat shading assigns a single color to a single polygon on the surface of the object. Gouraud shading blends colors across the polygons. Phong shading averages the color of each pixel based on the pixels that surround it, and requires the most processing power.
24 svx%2Fui%2Fdocking3deffects%2Fshadow 35 Adds or removes a shadow from the selected 3D object.
26 svx%2Fui%2Fdocking3deffects%2Fdistance 55 Enter the distance to leave between the camera and the center of the selected object.
23 svx%2Fui%2Fdocking3deffects%2Fslant 3b Enter an angle from 0 to 90 degrees for casting the shadow.
2a svx%2Fui%2Fdocking3deffects%2Fambientcolor 25 Select a color for the ambient light.
29 svx%2Fui%2Fdocking3deffects%2Flightcolor1 2c Select a color for the current light source.
24 svx%2Fui%2Fdocking3deffects%2Flight8 d0 Click twice to turn the light source on, and then select a color for the light from the list. If you want, you can also set the color of the surrounding light, by selecting a color from the Ambient light box.
23 svx%2Fui%2Fdocking3deffects%2Flight 33 Define the light source for the selected 3D object.
28 svx%2Fui%2Fdocking3deffects%2Ftexcircley 3f Wraps the vertical axis of the texture pattern around a sphere.
28 svx%2Fui%2Fdocking3deffects%2Ftexreplace 24 Applies the texture without shading.
25 svx%2Fui%2Fdocking3deffects%2Ftextype 28 Converts the texture to black and white.
27 svx%2Fui%2Fdocking3deffects%2Ftexfilter 37 Blurs the texture slightly to remove unwanted speckles.
25 svx%2Fui%2Fdocking3deffects%2Ftexture 11f Sets the properties of the surface texture for the selected 3D object. This feature is only available after you apply a surface texture to the selected object. To quickly apply a surface texture, open the Gallery, hold down Shift+Ctrl, and then drag an image onto the selected 3D object.
29 svx%2Fui%2Fdocking3deffects%2Ftexmodulate 79 Applies the texture with shading. To define the shading options for the texture, click the Shading button in this dialog.
25 svx%2Fui%2Fdocking3deffects%2Ftexobjx 4c Automatically adjusts the texture based on the shape and size of the object.
25 svx%2Fui%2Fdocking3deffects%2Ftexobjy 4c Automatically adjusts the texture based on the shape and size of the object.
26 svx%2Fui%2Fdocking3deffects%2Ftexcolor 1e Converts the texture to color.
2a svx%2Fui%2Fdocking3deffects%2Ftexparallelx 34 Applies the texture parallel to the horizontal axis.
28 svx%2Fui%2Fdocking3deffects%2Ftexcirclex 41 Wraps the horizontal axis of the texture pattern around a sphere.
2a svx%2Fui%2Fdocking3deffects%2Ftexparallely 32 Applies the texture parallel to the vertical axis.
27 svx%2Fui%2Fdocking3deffects%2Fintensity 2b Enter the intensity of the specular effect.
27 svx%2Fui%2Fdocking3deffects%2Fspeccolor 35 Select the color that you want the object to reflect.
26 svx%2Fui%2Fdocking3deffects%2Fmaterial 2f Changes the coloring of the selected 3D object.
27 svx%2Fui%2Fdocking3deffects%2Ffavorites 59 Select a predefined color scheme, or select User-defined to define a custom color scheme.
26 svx%2Fui%2Fdocking3deffects%2Fobjcolor 36 Select the color that you want to apply to the object.
28 svx%2Fui%2Fdocking3deffects%2Fillumcolor 2a Select the color to illuminate the object.
25 cui%2Fui%2Fdistributionpage%2Fhorleft 6b Distributes the selected objects, so that the left edges of the objects are evenly spaced from one another.
25 cui%2Fui%2Fdistributionpage%2Fhornone 2d Does not distribute the objects horizontally.
25 cui%2Fui%2Fdistributionpage%2Fvernone 2b Does not distribute the objects vertically.
1a .uno%3ADistributeSelection 9d Distributes three or more selected objects evenly along the horizontal axis or the vertical axis. You can also evenly distribute the spacing between objects.
29 cui%2Fui%2Fdistributionpage%2Fhordistance 66 Distributes the selected objects horizontally, so that the objects are evenly spaced from one another.
27 cui%2Fui%2Fdistributionpage%2Fhorcenter 73 Distributes the selected objects, so that the horizontal centers of the objects are evenly spaced from one another.
26 cui%2Fui%2Fdistributionpage%2Fhorright 6c Distributes the selected objects, so that the right edges of the objects are evenly spaced from one another.
29 cui%2Fui%2Fdistributionpage%2Fverdistance 64 Distributes the selected objects vertically, so that the objects are evenly spaced from one another.
24 cui%2Fui%2Fdistributionpage%2Fvertop 6a Distributes the selected objects, so that the top edges of the objects are evenly spaced from one another.
27 cui%2Fui%2Fdistributionpage%2Fverbottom 6d Distributes the selected objects, so that the bottom edges of the objects are evenly spaced from one another.
27 cui%2Fui%2Fdistributionpage%2Fvercenter 71 Distributes the selected objects, so that the vertical centers of the objects are evenly spaced from one another.
15 .uno%3ATextAttributes 59 Sets the layout and anchoring properties for text in the selected drawing or text object.
20 cui%2Fui%2Fspellingdialog%2Fundo 74 Click to undo the last change in the current sentence. Click again to undo the previous change in the same sentence.
22 cui%2Fui%2Fspellingdialog%2Fchange 8a Replaces the unknown word with the current suggestion. If you changed more than just the misspelled word, the entire sentence is replaced.
29 cui%2Fui%2Fspellingdialog%2Fsuggestionslb 82 Lists suggested words to replace the misspelled word. Select the word that you want to use, and then click Correct or Correct All.
24 cui%2Fui%2Fspellingdialog%2Fsentence 91 Displays the sentence with the misspelled word highlighted. Edit the word or the sentence, or click one of the suggestions in the text box below.
28 cui%2Fui%2Fspellingdialog%2Fcheckgrammar 58 Enable Check grammar to work first on all spellcheck errors, then on all grammar errors.
25 cui%2Fui%2Fspellingdialog%2Fchangeall 49 Replaces all occurrences of the unknown word with the current suggestion.
f .uno%3ASpelling 9a Checks the document or the current selection for spelling errors. If a grammar checking extension is installed, the dialog also checks for grammar errors.
23 cui%2Fui%2Fspellingdialog%2Foptions 6c Opens a dialog, where you can select the user-defined dictionaries, and set the rules for the spellchecking.
22 cui%2Fui%2Fspellingdialog%2Fignore 39 Skips the unknown word and continues with the spellcheck.
26 cui%2Fui%2Fspellingdialog%2Flanguagelb 34 Specifies the language to use to check the spelling.
1f cui%2Fui%2Fspellingdialog%2Fadd 33 Adds the unknown word to a user-defined dictionary.
25 cui%2Fui%2Fspellingdialog%2Fignoreall 7e Skips all occurrences of the unknown word until the end of the current %PRODUCTNAME session and continues with the spellcheck.
26 cui%2Fui%2Fspellingdialog%2Fignorerule 74 While performing a grammar check, click Ignore Rule to ignore the rule that is currently flagged as a grammar error.
17 .uno%3AMoreDictionaries 3d Opens the default browser on the dictionaries extension page.
13 .uno%3ALanguageMenu 40 Opens a submenu where you can choose language specific commands.
3c svx%2Fui%2Fchineseconversiondialog%2FChineseConversionDialog 8a Converts the selected Chinese text from one Chinese writing system to the other. If no text is selected, the entire document is converted.
18 .uno%3AChineseConversion 8a Converts the selected Chinese text from one Chinese writing system to the other. If no text is selected, the entire document is converted.
36 cui%2Fui%2Fchinesedictionary%2FChineseDictionaryDialog 22 Edit the Chinese conversion terms.
1d cui%2Fui%2Fthesaurus%2Flangcb 24 Select a language for the thesaurus.
20 cui%2Fui%2Fthesaurus%2Freplaceed af The word or words in the "Replace with" text box will replace the original word in the document when you click the Replace button. You can also type text directly in this box.
10 .uno%3AThesaurus 51 Opens a dialog box to replace the current word with a synonym, or a related term.
23 cui%2Fui%2Fthesaurus%2Falternatives c8 Click an entry in the Alternatives list to copy the related term to the "Replace with" text box. Double-click an entry to copy the related term to the "Current word" text box and to look up that term.
1d cui%2Fui%2Fthesaurus%2Fwordcb b6 Displays the current word, or the related term that you selected by double-clicking a line in the Alternatives list. You can also type text directly in this box to look up your text.
1b cui%2Fui%2Fthesaurus%2Fleft 3d Recalls the previous contents of the "Current word" text box.
27 svx%2Fui%2Fdockingcolorreplace%2Fcolor5 47 Select the color to replace the transparent areas in the current image.
27 svx%2Fui%2Fdockingcolorreplace%2Fcolor4 96 Lists the available replacement colors. To modify the current list of colors, deselect the image, choose Format - Area, and then click the Colors tab.
25 svx%2Fui%2Fdockingcolorreplace%2Ftol4 d3 Set the tolerance for replacing a source color in the source image. To replace colors that are similar to the color that you selected, enter a low value. To replace a wider range of colors, enter a higher value.
28 svx%2Fui%2Fdockingcolorreplace%2Fpipette a5 Displays the color in the selected image that directly underlies the current mouse pointer position. This features only works if the Color Replacer tool is selected.
e .uno%3ABmpMask 5f Opens the Color Replacer dialog, where you can replace colors in bitmap and meta file graphics.
28 svx%2Fui%2Fdockingcolorreplace%2Freplace 74 Replaces the selected source colors in the current image with the colors that you specify in the Replace with boxes.
25 svx%2Fui%2Fdockingcolorreplace%2Fcbx5 4f Replaces transparent areas in the current image with the color that you select.
1a SVX_HID_BMPMASK_CTL_QCOL_1 af Displays the color in the selected image that you want to replace. To set the source color, click here, click the Color Replacer, and then click a color in the selected image.
25 svx%2Fui%2Fdockingcolorreplace%2Fcbx4 71 Select this checkbox to replace the current Source color with the color that you specify in the Replace with box.
15 .uno%3AAutoCorrectDlg 3e Sets the options for automatically replacing text as you type.
22 cui%2Fui%2Fapplyautofmtpage%2Fedit 29 Modifies the selected AutoCorrect option.
2e cui%2Fui%2Fapplyautofmtpage%2FApplyAutoFmtPage 56 Select the options for automatically correcting errors as you type, and then click OK.
25 cui%2Fui%2Facorreplacepage%2Ftextonly 85 Saves the entry in the With box without formatting. When the replacement is made, the text uses the same format as the document text.
20 cui%2Fui%2Facorreplacepage%2Fnew 33 Adds or replaces an entry in the replacement table.
2c cui%2Fui%2Facorreplacepage%2FAcorReplacePage 6e Edits the replacement table for automatically correcting or replacing words or abbreviations in your document.
24 cui%2Fui%2Facorreplacepage%2Ftabview 13b Lists the entries for automatically replacing words, abbreviations or word parts while you type. To add an entry, enter text in the Replace and With boxes, and then click New. To edit an entry, select it, change the text in the With box, and then click Replace. To delete an entry, select it, and then click Delete.
25 cui%2Fui%2Facorreplacepage%2Forigtext 272 Enter the word, abbreviation or word part that you want to replace while you type. Wildcard character sequence .* in the end of word results the replacement of the word before arbitrary suffixes, too. Wildcard character sequence .* before the word results the replacement after arbitrary prefixes, too. For example, the pattern "i18n.*" with the replacement text "internationalization" finds and replaces "i18ns" with "internationalizations", or the pattern ".*..." with the replacement text "…" finds and replaces three dots in "word..." with the typographically correct precomposed Unicode horizontal ellipsis ("word…").
24 cui%2Fui%2Facorreplacepage%2Fnewtext f3 Enter the replacement text, graphic, frame, or OLE object that you want to replace the text in the Replace box. If you have selected text, a graphic, a frame, or an OLE object in your document, the relevant information is already entered here.
26 cui%2Fui%2Facorexceptpage%2Fautodouble 12e Automatically adds abbreviations or words that start with two capital letters to the corresponding list of exceptions. This feature only works if the Correct TWo INitial CApitals option or the Capitalize first letter of every sentence option are selected in the [T] column onOptions tab of this dialog.
22 cui%2Fui%2Facorexceptpage%2Fdouble ce Type the word or abbreviation that starts with two capital letters that you do not want $[officename] to change to one initial capital. For example, enter PC to prevent $[officename] from changing PC to Pc.
2a cui%2Fui%2Facorexceptpage%2FAcorExceptPage 6d Specify the abbreviations or letter combinations that you do not want $[officename] to correct automatically.
23 cui%2Fui%2Fautocorrectdialog%2Flang 4f Select the language for which you want to create or edit the replacement rules.
25 cui%2Fui%2Facorexceptpage%2Fnewdouble 31 Adds the current entry to the list of exceptions.
26 cui%2Fui%2Facorexceptpage%2Fabbrevlist 3d Lists the abbreviations that are not automatically corrected.
26 cui%2Fui%2Facorexceptpage%2Fdoublelist b3 Lists the words or abbreviations that start with two initial capitals that are not automatically corrected. All words which start with two capital letters are listed in the field.
22 cui%2Fui%2Facorexceptpage%2Fabbrev d3 Type an abbreviation followed by a period, and then click New. This prevents $[officename] from automatically capitalizing the first letter of the word that comes after the period at the end of the abbreviation.
2d cui%2Fui%2Fapplylocalizedpage%2Fdefaultsingle 32 Resets the quotation marks to the default symbols.
29 cui%2Fui%2Fapplylocalizedpage%2Fenddouble 9e Select the special character that will automatically replace the current closing quotation mark in your document when you choose Format - AutoCorrect - Apply.
32 cui%2Fui%2Fapplylocalizedpage%2FApplyLocalizedPage 5a Select to apply the replacements while you type [T], or when you modify existing text [M].
24 cui%2Fui%2Fapplylocalizedpage%2Flist 5a Select to apply the replacements while you type [T], or when you modify existing text [M].
2b cui%2Fui%2Fapplylocalizedpage%2Fstartsingle 9e Select the special character that will automatically replace the current opening quotation mark in your document when you choose Format - AutoCorrect - Apply.
29 cui%2Fui%2Fapplylocalizedpage%2Fchecklist 5a Select to apply the replacements while you type [T], or when you modify existing text [M].
2d cui%2Fui%2Fapplylocalizedpage%2Fdoublereplace 78 Automatically replaces the default system symbol for single quotation marks with the special character that you specify.
17 HID_LINGU_WORD_LANGUAGE 63 Changes the language settings for the highlighted word, if the word is found in another dictionary.
12 HID_LINGU_AUTOCORR 9f To always replace the highlighted word, click a word in the list. The word pair is stored in the replacement table under Tools - AutoCorrect Options - Replace.
11 HID_LINGU_REPLACE 66 Click the word to replace the highlighted word. Use the AutoCorrect submenu for permanent replacement.
16 HID_LINGU_SPELLING_DLG 1c Opens the Spellcheck dialog.
15 HID_LINGU_IGNORE_WORD 46 Ignores all instances of the highlighted word in the current document.
17 HID_LINGU_PARA_LANGUAGE 7e Changes the language setting for the paragraph that contains the highlighted word, if the word is found in another dictionary.
12 HID_LINGU_ADD_WORD 37 Adds the highlighted word to a user-defined dictionary.
26 cui%2Fui%2Fwordcompletionpage%2Fdelete 41 Removes the selected word or words from the Word Completion list.
2a cui%2Fui%2Fwordcompletionpage%2Fmaxentries 55 Enter the maximum number of words that you want to store in the Word Completion list.
2b cui%2Fui%2Fwordcompletionpage%2Fwhenclosing f7 When enabled, the list gets cleared when closing the current document. When disabled, makes the current Word Completion list available to other documents after you close the current document. The list remains available until you exit %PRODUCTNAME.
29 cui%2Fui%2Fwordcompletionpage%2Fshowastip 2a Displays the completed word as a Help Tip.
2a cui%2Fui%2Fwordcompletionpage%2Fminwordlen 5c Enter the minimum word length for a word to become eligible for the word completion feature.
32 cui%2Fui%2Fwordcompletionpage%2Fenablewordcomplete 92 Stores frequently used words, and automatically completes a word after you type three letters that match the first three letters of a stored word.
2b cui%2Fui%2Fwordcompletionpage%2Fappendspace 49 If you do not add punctuation after the word, $[officename] adds a space.
27 cui%2Fui%2Fwordcompletionpage%2Fentries ed Lists the collected words. The list is valid until you close the current document. To make the list available to other documents in the current session, disable "When closing a document, remove the words collected from it from the list".
2a cui%2Fui%2Fwordcompletionpage%2Facceptwith 4c Select the key that you want to use to accept the automatic word completion.
2c cui%2Fui%2Fwordcompletionpage%2Fcollectwords 87 Adds the frequently used words to a list. To remove a word from the Word Completion list, select the word, and then click Delete Entry.
2b cui%2Fui%2Fsmarttagoptionspage%2Fproperties 78 To configure a Smart Tag, select the name of the Smart Tag, then click Properties. Not all Smart Tags can be configured.
25 cui%2Fui%2Fsmarttagoptionspage%2Fmain 43 Enables Smart Tags to be evaluated and shown in your text document.
34 cui%2Fui%2Fsmarttagoptionspage%2FSmartTagOptionsPage 56 When you have installed at least one Smart Tag extension, you see the Smart Tags page.
1e .uno%3ABulletsAndNumberingDial 69 Adds numbering or bullets to the current paragraph, and lets you edit format of the numbering or bullets.
24 cui%2Fui%2Fpickbulletpage%2Fvalueset 2c Click the bullet style that you want to use.
2a cui%2Fui%2Fpickbulletpage%2FPickBulletPage 38 Displays the different bullet styles that you can apply.
27 cui%2Fui%2Fpicknumberingpage%2Fvalueset 2f Click the numbering style that you want to use.
30 cui%2Fui%2Fpicknumberingpage%2FPickNumberingPage 3b Displays the different numbering styles that you can apply.
25 cui%2Fui%2Fpickoutlinepage%2Fvalueset 2d Click the outline style that you want to use.
2c cui%2Fui%2Fpickoutlinepage%2FPickOutlinePage 8e Displays the different styles that you can apply to a hierarchical list. $[officename] supports up to nine outline levels in a list hierarchy.
25 cui%2Fui%2Fpickgraphicpage%2Fvalueset 33 Click the graphics that you want to use as bullets.
29 cui%2Fui%2Fpickgraphicpage%2Flinkgraphics 6c If enabled, the graphics are inserted as links. If not enabled, the graphics are embedded into the document.
2c cui%2Fui%2Fpickgraphicpage%2FPickGraphicPage 4f Displays the different graphics that you can use as bullets in a bulleted list.
2a cui%2Fui%2Fnumberingoptionspage%2Forientlb 2c Select the alignment option for the graphic.
2b cui%2Fui%2Fnumberingoptionspage%2Fkeepratio 2e Maintains the size proportions of the graphic.
2a cui%2Fui%2Fnumberingoptionspage%2Fheightmf 1f Enter a height for the graphic.
28 cui%2Fui%2Fnumberingoptionspage%2Fsuffix a0 Enter a character or the text to display behind the number in the list. If you want to create a numbered list that uses the style "1.)", enter ".)" in this box.
2a cui%2Fui%2Fnumberingoptionspage%2Fnumfmtlb 31 Select a numbering style for the selected levels.
28 cui%2Fui%2Fnumberingoptionspage%2Fprefix 4c Enter a character or the text to display in front of the number in the list.
29 cui%2Fui%2Fnumberingoptionspage%2Flevellb 47 Select the level(s) that you want to define the formatting options for.
27 cui%2Fui%2Fnumberingoptionspage%2Fcolor 2f Select a color for the current numbering style.
29 cui%2Fui%2Fnumberingoptionspage%2Frelsize 7b Enter the amount by which you want to resize the bullet character with respect to the font height of the current paragraph.
29 cui%2Fui%2Fnumberingoptionspage%2Fstartat 32 Enter a new starting number for the current level.
28 cui%2Fui%2Fnumberingoptionspage%2Fbullet 4a Opens the Special Characters dialog, where you can select a bullet symbol.
28 cui%2Fui%2Fnumberingoptionspage%2Fbitmap 50 Select the graphic, or locate the graphic file that you want to use as a bullet.
29 cui%2Fui%2Fnumberingoptionspage%2Fwidthmf 1e Enter a width for the graphic.
39 modules%2Fswriter%2Fui%2Foutlinepositionpage%2Findentatmf 6f Enter the amount of space to leave between the left edge of the numbering symbol and the left edge of the text.
37 modules%2Fswriter%2Fui%2Foutlinepositionpage%2Fstandard 3f Resets the indent and the spacing values to the default values.
37 modules%2Fswriter%2Fui%2Foutlinepositionpage%2Frelative 4f Indents the current level relative to the previous level in the list hierarchy.
38 modules%2Fswriter%2Fui%2Foutlinepositionpage%2Fnumdistmf f1 Enter the amount of space to leave between the left page margin (or the left edge of the text object) and the left edge of the numbering symbol. If the current paragraph style uses an indent, the amount you enter here is added to the indent.
2e cui%2Fui%2Fnumberingpositionpage%2Falignedatmf 5b Enter the distance from the left page margin at which the numbering symbol will be aligned.
2d cui%2Fui%2Fnumberingpositionpage%2Findentatmf 7c Enter the distance from the left page margin to the start of all lines in the numbered paragraph that follow the first line.
32 cui%2Fui%2Fnumberingpositionpage%2Fnumfollowedbylb 53 Select the element that will follow the numbering: a tab stop, a space, or nothing.
36 modules%2Fswriter%2Fui%2Foutlinepositionpage%2Flevellb 2c Select the level(s) that you want to modify.
27 cui%2Fui%2Fnumberingpositionpage%2Fatmf 6e If you select a tab stop to follow the numbering, you can enter a non-negative value as the tab stop position.
39 modules%2Fswriter%2Fui%2Foutlinepositionpage%2Fnumalignlb 125 Set the alignment of the numbering symbols. Select "Left" to align the numbering symbol to start directly at the "Aligned at" position. Select "Right" to align the symbol to end directly before the "Aligned at" position. Select "Centered" to center the symbol around the "Aligned at" position.
a 1241731592 2a Prompts you to delete the selected script.
a 1241731591 44 Opens a dialog where you can change the name of the selected script.
a 1241731590 3a Opens the default script editor for your operating system.
a 1241731589 15 Creates a new script.
a 1241731587 41 To run a script, select a script in the list, and then click Run.
2a modules%2FBasicIDE%2Fui%2Flibpage%2Fimport 66 Locate that $[officename] Basic library that you want to add to the current list, and then click Open.
36 modules%2FBasicIDE%2Fui%2Fbasicmacrodialog%2Fnewmodule 29 Saves the recorded macro in a new module.
30 modules%2FBasicIDE%2Fui%2Fdialogpage%2Fnewdialog 2a Opens the editor and creates a new dialog.
33 modules%2FBasicIDE%2Fui%2Fbasicmacrodialog%2Fdelete 33 Creates a new macro, or deletes the selected macro.
35 modules%2FBasicIDE%2Fui%2Fbasicmacrodialog%2Forganize 28 Lets you manage modules or dialog boxes.
30 modules%2FBasicIDE%2Fui%2Fbasicmacrodialog%2Frun 20 Runs or saves the current macro.
36 modules%2FBasicIDE%2Fui%2Fbasicmacrodialog%2Flibraries a5 Lists the libraries and the modules where you can open or save your macros. To save a macro with a particular document, open the document, and then open this dialog.
12 .uno%3AMacroDialog 22 Opens a dialog to organize macros.
2b modules%2FBasicIDE%2Fui%2Fmodulepage%2Fedit 2f Opens the selected macro or dialog for editing.
3a modules%2FBasicIDE%2Fui%2Fbasicmacrodialog%2Fmacronameedit 67 Displays the name of the selected macro. To create or to change the name of a macro, enter a name here.
2b modules%2FBasicIDE%2Fui%2Flibpage%2Flibrary 56 Lists the existing macro libraries for the current application and any open documents.
33 modules%2FBasicIDE%2Fui%2Fbasicmacrodialog%2Fassign 6e Opens the Customize dialog, where you can assign the selected macro to a menu command, a toolbar, or an event.
31 modules%2FBasicIDE%2Fui%2Fbasicmacrodialog%2Fedit 59 Starts the $[officename] Basic editor and opens the selected macro or dialog for editing.
37 modules%2FBasicIDE%2Fui%2Fbasicmacrodialog%2Fnewlibrary 2a Saves the recorded macro in a new library.
33 modules%2FBasicIDE%2Fui%2Fbasicmacrodialog%2Fmacros 52 Lists the macros that are contained in the module selected in the Macro from list.
12 CUI_HID_SCRIPTSBOX 83 Select a macro or script from "user", "share", or an open document. To view the available macros or scripts, double-click an entry.
30 modules%2FBasicIDE%2Fui%2Fmodulepage%2Fnewmodule 2a Opens the editor and creates a new module.
2d modules%2FBasicIDE%2Fui%2Fdialogpage%2Fdelete 57 Lets you manage the macro libraries for the current application and any open documents.
2c modules%2FBasicIDE%2Fui%2Flibpage%2Flocation 60 Select the application or the document containing the macro libraries that you want to organize.
28 modules%2FBasicIDE%2Fui%2Flibpage%2Fedit 51 Opens the $[officename] Basic editor so that you can modify the selected library.
2e modules%2FBasicIDE%2Fui%2Fmodulepage%2Flibrary 26 Lists the existing macros and dialogs.
2c modules%2FBasicIDE%2Fui%2Flibpage%2Fpassword 37 Assigns or edits the password for the selected library.
27 modules%2FBasicIDE%2Fui%2Flibpage%2Fnew 16 Creates a new library.
35 modules%2FBasicIDE%2Fui%2Fnewlibdialog%2FNewLibDialog 1c Enter a name for the script.
15 .uno%3AMacroSignature 6e Adds and removes digital signatures to and from your macros. You can also use the dialog to view certificates.
27 .uno%3AMacroOrganizer%3FTabId%3Ashort=1 32 Opens the Dialogs tab page of the Macro Organizer.
f .uno%3ARunMacro 2b Opens a dialog where you can start a macro.
14 .uno%3AStopRecording 18 Stops recording a macro.
14 .uno%3AMacroRecorder 14 Records a new macro.
24 svx%2Fui%2Fpasswd%2FconfirmpassEntry 32 Reenter the new password for the selected library.
20 svx%2Fui%2Fpasswd%2FnewpassEntry 2e Enter a new password for the selected library.
20 svx%2Fui%2Fpasswd%2FoldpassEntry 34 Enter the current password for the selected library.
22 svx%2Fui%2Fpasswd%2FPasswordDialog 2e Protects the selected library with a password.
44 .uno%3AScriptOrganizer%3FScriptOrganizer.Language%3Astring=BeanShell 2e Opens a dialog where you can organize scripts.
45 .uno%3AScriptOrganizer%3FScriptOrganizer.Language%3Astring=JavaScript 2e Opens a dialog where you can organize scripts.
16 .uno%3AScriptOrganizer 50 Opens a submenu with links to dialogs where you can organize macros and scripts.
33 modules%2FBasicIDE%2Fui%2Fimportlibdialog%2Freplace 43 Replaces a library that has the same name with the current library.
2f modules%2FBasicIDE%2Fui%2Fimportlibdialog%2Fref 68 Adds the selected library as a read-only file. The library is reloaded each time you start %PRODUCTNAME.
3b modules%2FBasicIDE%2Fui%2Fimportlibdialog%2FImportLibDialog 6d Enter a name or the path to the library that you want to append. You can also select a library from the list.
12 .uno%3ALoadToolBox 59 Customizes $[officename] menus, shortcut keys, toolbars, and macro assignments to events.
22 cui%2Fui%2Fmenuassignpage%2Fsavein 47 Select the application or open document where you want to add the menu.
20 cui%2Fui%2Fmenuassignpage%2Fdown 2a Moves the selected item down one position.
24 cui%2Fui%2Fmenuassignpage%2Fmenuedit 29 Opens a submenu with additional commands.
2a cui%2Fui%2Fmenuassignpage%2Ftoplevelbutton 71 Opens the New Menu dialog where you can enter the name of a new menu as well as select the location for the menu.
28 cui%2Fui%2Fmenuassignpage%2Ftoplevellist 32 Select the menu and submenu that you want to edit.
2a cui%2Fui%2Fmenuassignpage%2FMenuAssignPage 6b Customizes and saves current menu layouts as well as creates new menus. You cannot customize context menus.
23 cui%2Fui%2Fmenuassignpage%2Fentries 6c Displays a list of the available menu commands for the selected menu in the current application or document.
22 cui%2Fui%2Fmenuassignpage%2Fmodify 2f Opens a menu that contains additional commands.
2b cui%2Fui%2Fmacroselectordialog%2Fcategories 5e Select any command, then click Add or drag-and-drop the command into the Customize dialog box.
1f cui%2Fui%2Fmenuassignpage%2Fadd 7d Opens the Add Commands dialog. Select any command, then click Add or drag-and-drop the command into the Customize dialog box.
1e cui%2Fui%2Fmenuassignpage%2Fup 28 Moves the selected item up one position.
29 cui%2Fui%2Fmacroselectordialog%2Fcommands 5e Select any command, then click Add or drag-and-drop the command into the Customize dialog box.
2f cui%3AEdit%3AMD_MENU_ORGANISER%3AEDIT_MENU_NAME 76 Enter a name for the menu. To specify a letter in the name as an accelerator key, enter a tilde (~) before the letter.
24 cui%2Fui%2Fmovemenu%2FMoveMenuDialog 6e Moves the selected menu entry up one position or down one position in the menu when you click an arrow button.
22 cui%2Fui%2Faccelconfigpage%2Freset 32 Resets modified values back to the default values.
26 cui%2Fui%2Faccelconfigpage%2Fshortcuts be Lists the shortcut keys and the associated commands. To assign or modify the shortcut key for the command selected in the Function list, click a shortcut in this list, and then click Modify.
21 cui%2Fui%2Faccelconfigpage%2Fsave 4c Saves the current shortcut key configuration, so that you can load it later.
23 cui%2Fui%2Faccelconfigpage%2Fmodule 41 Displays shortcut keys for the current $[officename] application.
23 cui%2Fui%2Faccelconfigpage%2Fdelete 48 Deletes the selected element or elements without requiring confirmation.
23 cui%2Fui%2Faccelconfigpage%2Foffice 49 Displays shortcut keys that are common to all $[officename] applications.
2c cui%2Fui%2Faccelconfigpage%2FAccelConfigPage 5d Assigns or edits the shortcut keys for $[officename] commands, or $[officename] Basic macros.
23 cui%2Fui%2Faccelconfigpage%2Fchange 6c Assigns the key combination selected in the Shortcut keys list to the command selected in the Function list.
25 cui%2Fui%2Faccelconfigpage%2Fcategory 63 Lists the available function categories. To assign shortcuts to Styles, open the "Styles" category.
25 cui%2Fui%2Faccelconfigpage%2Ffunction dd Select a function that you want to assign a shortcut key to, click a key combination in the Shortcut keys list, and then click Modify. If the selected function already has a shortcut key, it is displayed in the Keys list.
21 cui%2Fui%2Faccelconfigpage%2Fkeys 46 Displays the shortcut keys that are assigned to the selected function.
21 cui%2Fui%2Faccelconfigpage%2Fload 4b Replaces the shortcut key configuration with one that was previously saved.
13 CUI_HID_SVX_SAVE_IN 49 Select the location where to load the configuration and where to save it.
1c CUI_HID_SVX_NEW_TOOLBAR_ITEM 79 Opens the Add Commands dialog. Select any command, then click Add or drag-and-drop the command into the Customize dialog.
17 CUI_HID_SVX_NEW_TOOLBAR 6c Opens the Name dialog, where you enter the name of a new toolbar and select the location of the new toolbar.
1f CUI_HID_SVX_MODIFY_TOOLBAR_ITEM 21 The Modify button opens a submenu
1b CUI_HID_SVX_UP_TOOLBAR_ITEM 27 Moves the selected item up in the list.
1a CUI_HID_SVX_MODIFY_TOOLBAR 22 The Toolbar button opens a submenu
1d CUI_HID_SVX_DOWN_TOOLBAR_ITEM 29 Moves the selected item down in the list.
2c cui%2Fui%2Ficonselectordialog%2FdeleteButton 58 Click to remove the selected icon from the list. Only user-defined icons can be removed.
2c cui%2Fui%2Ficonselectordialog%2FimportButton 99 Adds new icons to the list of icons. You see a file open dialog that imports the selected icon or icons into the internal icon directory of %PRODUCTNAME.
2c cui%2Fui%2Ficonselectordialog%2FIconSelector 99 Adds new icons to the list of icons. You see a file open dialog that imports the selected icon or icons into the internal icon directory of %PRODUCTNAME.
2f SFX2%3APUSHBUTTON%3ATP_CONFIG_EVENT%3APB_DELETE 34 Deletes the macro assignment for the selected event.
12 .uno%3ATableEvents 6d Assigns macros to program events. The assigned macro runs automatically every time the selected event occurs.
2c cui%2Fui%2Fmacroassignpage%2FMacroAssignPage 6d Assigns macros to program events. The assigned macro runs automatically every time the selected event occurs.
9 705547787 59 Select first where to save the event binding, in the current document or in %PRODUCTNAME.
2f SFX2%3APUSHBUTTON%3ATP_CONFIG_EVENT%3APB_ASSIGN 41 Opens the Macro Selector to assign a macro to the selected event.
5 40000 b1 The big list box lists the events and the assigned macros. After you selected the location in the Save In list box, select an event in the big list box. Then click Assign Macro.
27 filter%2Fui%2Fxmlfiltersettings%2Fclose 12 Closes the dialog.
28 filter%2Fui%2Fxmlfiltersettings%2Fdelete 44 Deletes the selected file after you confirm the dialog that follows.
26 filter%2Fui%2Fxmlfiltersettings%2Ftest 32 Opens a dialog with the name of the selected file.
26 filter%2Fui%2Fxmlfiltersettings%2Fhelp 27 Displays the help page for this dialog.
26 filter%2Fui%2Fxmlfiltersettings%2Fopen 4d Displays an Open dialog to open a filter from an XSLT filter package (*.jar).
1c .uno%3AOpenXMLFilterSettings 7d Opens the XML Filter Settings dialog, where you can create, edit, delete, and test filters to import and to export XML files.
26 filter%2Fui%2Fxmlfiltersettings%2Fsave 56 Displays a Save as dialog to save the selected file as an XSLT filter package (*.jar).
2c filter%2Fui%2Fxmlfiltersettings%2Ffilterlist 3a Select one or more filters, then click one of the buttons.
26 filter%2Fui%2Fxmlfiltersettings%2Fedit 32 Opens a dialog with the name of the selected file.
25 filter%2Fui%2Fxmlfiltersettings%2Fnew 2d Opens a dialog with the name of a new filter.
33 filter%2Fui%2Fxmlfiltertabpagegeneral%2Fdescription 1b Enter a comment (optional).
3f filter%2Fui%2Fxmlfiltertabpagegeneral%2FXmlFilterTabPageGeneral 34 Enter or edit general information for an XML filter.
32 filter%2Fui%2Fxmlfiltertabpagegeneral%2Ffiltername 3c Select the application that you want to use with the filter.
31 filter%2Fui%2Fxmlfiltertabpagegeneral%2Fextension 99 Enter the file extension to use when you open a file without specifying a filter. $[officename] uses the file extension to determine which filter to use.
35 filter%2Fui%2Fxmlfiltertabpagegeneral%2Finterfacename 4d Enter the name that you want to display in the File type box in file dialogs.
39 filter%2Fui%2Fxmlfiltertabpagetransformation%2Fxsltimport 6b If this is an import filter, enter the file name of the XSLT stylesheet that you want to use for importing.
39 filter%2Fui%2Fxmlfiltertabpagetransformation%2Fxsltexport 6b If this is an export filter, enter the file name of the XSLT stylesheet that you want to use for exporting.
39 filter%2Fui%2Fxmlfiltertabpagetransformation%2Ftempimport 7b Enter the name of the template that you want to use for importing. In the template, styles are defined to display XML tags.
32 filter%2Fui%2Fxmlfiltertabpagetransformation%2Fdoc 22 Enter the DOCTYPE of the XML file.
4d filter%2Fui%2Fxmlfiltertabpagetransformation%2FXmlFilterTabPageTransformation 31 Enter or edit file information for an XML filter.
39 filter%2Fui%2Fxmlfiltertabpagetransformation%2Fbrowsetemp 1e Opens a file selection dialog.
21 HID_XML_FILTER_TEST_IMPORT_RECENT 3c Re-opens the document that was last opened with this dialog.
21 HID_XML_FILTER_TEST_IMPORT_BROWSE 5f Opens a file selection dialog. The selected file is opened using the current XML import filter.
2b FILTER_HID_XML_FILTER_TEST_EXPORT_XSLT_FILE 5a Displays the file name of the XSLT filter that you entered on the Transformation tab page.
21 HID_XML_FILTER_TEST_EXPORT_BROWSE a0 Locate the file that you want to apply the XML export filter to. The XML code of the transformed file is opened in your default XML editor after transformation.
29 HID_XML_FILTER_TEST_IMPORT_DISPLAY_SOURCE 59 Opens the XML source of the selected document in your default XML editor after importing.
22 HID_XML_FILTER_TEST_EXPORT_CURRENT 57 Displays the file name of the template that you entered on the Transformation tab page.
1c HID_XML_SOURCE_FILE_VALIDATE 37 Validates the contents of the XML Filter output window.
1c HID_XML_FILTER_OUTPUT_WINDOW 28 Lists the test results of an XML filter.
1e HID_HANGULDLG_BUTTON_IGNOREALL 81 No changes will be made to the current selection, and every time the same selection is detected it will be skipped automatically.
1b HID_HANGULDLG_BUTTON_CHANGE 5d Replaces the selection with the suggested characters or word according to the format options.
1b HID_HANGULDLG_BUTTON_IGNORE 6d No changes will be made to the current selection. The next word or character will be selected for conversion.
36 cui%2Fui%2Fhangulhanjaoptdialog%2FHangulHanjaOptDialog 26 Opens the Hangul/Hanja Options dialog.
34 SVX_CHECKBOX_RID_SVX_MDLG_HANGULHANJA_CB_HANGUL_ONLY 33 Check to convert only Hangul. Do not convert Hanja.
33 SVX_CHECKBOX_RID_SVX_MDLG_HANGULHANJA_CB_HANJA_ONLY 33 Check to convert only Hanja. Do not convert Hangul.
3e SVX_RADIOBUTTON_RID_SVX_MDLG_HANGULHANJA_RB_HANJA_HANGUL_ABOVE 44 The Hangul part will be displayed as ruby text above the Hanja part.
1e HID_HANGULDLG_BUTTON_CHANGEALL aa Replaces the selection with the suggested characters or word according to the format options. Every time the same selection is detected it will be replaced automatically.
2f SVX_PUSHBUTTON_RID_SVX_MDLG_HANGULHANJA_PB_FIND 57 Finds your Hangul input in the dictionary and replaces it with the corresponding Hanja.
1a HID_HANGULDLG_BUTTON_CLOSE 12 Closes the dialog.
14 HID_SPELLDLG_SETWORD 1f Displays the current selection.
1a HID_HANGULDLG_EDIT_NEWWORD 3e Displays the first replacement suggestion from the dictionary.
1c .uno%3AHangulHanjaConversion 4f Converts the selected Korean text from Hangul to Hanja or from Hanja to Hangul.
3e SVX_RADIOBUTTON_RID_SVX_MDLG_HANGULHANJA_RB_HANGUL_HANJA_BELOW 44 The Hanja part will be displayed as ruby text below the Hangul part.
3d SVX_CHECKBOX_RID_SVX_MDLG_HANGULHANJA_CB_REPLACE_BY_CHARACTER 68 Check to move character-by-character through the selected text. If not checked, full words are replaced.
33 SVX_LISTBOX_RID_SVX_MDLG_HANGULHANJA_LB_SUGGESTIONS 36 Displays all available replacements in the dictionary.
42 SVX_RADIOBUTTON_RID_SVX_MDLG_HANGULHANJA_RB_HANJA_HANGUL_BRACKETED 43 The Hangul part will be displayed in brackets after the Hanja part.
3d SVX_RADIOBUTTON_RID_SVX_MDLG_HANGULHANJA_RB_SIMPLE_CONVERSION 41 The original characters are replaced by the suggested characters.
42 SVX_RADIOBUTTON_RID_SVX_MDLG_HANGULHANJA_RB_HANGUL_HANJA_BRACKETED 43 The Hanja part will be displayed in brackets after the Hangul part.
3e SVX_RADIOBUTTON_RID_SVX_MDLG_HANGULHANJA_RB_HANJA_HANGUL_BELOW 44 The Hangul part will be displayed as ruby text below the Hanja part.
3e SVX_RADIOBUTTON_RID_SVX_MDLG_HANGULHANJA_RB_HANGUL_HANJA_ABOVE 44 The Hanja part will be displayed as ruby text above the Hangul part.
33 cui%2Fui%2Fhangulhanjaoptdialog%2Fautoreplaceunique 4b Automatically replaces words that only have one suggested word replacement.
31 cui%2Fui%2Fhangulhanjaoptdialog%2Fshowrecentfirst 60 Shows the replacement suggestion that you selected the last time as the first entry on the list.
2c cui%2Fui%2Fhangulhanjaoptdialog%2Fignorepost 56 Ignores positional characters at the end of Korean words when you search a dictionary.
36 cui%2Fui%2Fhangulhanjaadddialog%2FHangulHanjaAddDialog ae Lists all user-defined dictionaries. Select the check box next to the dictionary that you want to use. Clear the check box next to the dictionary that you do not want to use.
25 cui%2Fui%2Fhangulhanjaoptdialog%2Fnew 4b Opens the New dictionary dialog box, where you can create a new dictionary.
28 cui%2Fui%2Fhangulhanjaoptdialog%2Fdelete 2d Deletes the selected user-defined dictionary.
27 cui%2Fui%2Fhangulhanjaadddialog%2Fentry 20 Enter a name for the dictionary.
26 cui%2Fui%2Fhangulhanjaoptdialog%2Fedit 57 Opens the Edit Custom Dictionary dialog where you can edit any user-defined dictionary.
2d cui%2Fui%2Fhangulhanjaeditdictdialog%2Fdelete 1b Deletes the selected entry.
2b cui%2Fui%2Fhangulhanjaeditdictdialog%2Fbook 39 Select the user-defined dictionary that you want to edit.
2a cui%2Fui%2Fhangulhanjaeditdictdialog%2Fnew 3a Adds the current replacement definition to the dictionary.
2f cui%2Fui%2Fhangulhanjaeditdictdialog%2Foriginal 79 Select the entry in the current dictionary that you want to edit. If you want, you can also type a new entry in this box.
2c cui%2Fui%2Fhangulhanjaeditdictdialog%2Fedit1 95 Type a suggested replacement for the entry that is selected in the Original text box. The replacement word can contain a maximum of eight characters.
12 .uno%3ASpellDialog 19 Checks spelling manually.
10 .uno%3ANewWindow 44 Opens a new window that displays the contents of the current window.
33 padmin%3APushButton%3ARID_PADIALOG%3ARID_PA_BTN_DEL 2a Removes the selected source from the list.
33 padmin%3APushButton%3ARID_PADIALOG%3ARID_PA_BTN_STD 24 Opens the Select Certificate dialog.
10 .uno%3ASignature 70 Adds and removes digital signatures to and from your document. You can also use the dialog to view certificates.
31 sfx2%3APushButton%3ATP_DOCINFODOC%3ABTN_SIGNATURE 70 Adds and removes digital signatures to and from your document. You can also use the dialog to view certificates.
29 XMLSECURITY_HID_XMLSEC_CTRL_SIGNATURESDLG 36 Lists the digital signatures for the current document.
3e xmlsecurity%3APushButton%3ARID_XMLSECDLG_DIGSIG%3ABTN_VIEWCERT 22 Opens the View Certificate dialog.
28 desktop%2Fui%2Fupdatedialog%2FUPDATE_ALL 8c By default, only the downloadable extensions are shown in the dialog. Mark Show all Updates to see also other extensions and error messages.
2a desktop%2Fui%2Fupdatedialog%2FUpdateDialog ec Click the Check for Updates button in the Extension Manager to check for online updates for all installed extensions. To check for online updates for only the selected extension, right-click to open the context menu, then choose Update.
38 desktop%2Fui%2Fupdateinstalldialog%2FUpdateInstallDialog ec Click the Check for Updates button in the Extension Manager to check for online updates for all installed extensions. To check for online updates for only the selected extension, right-click to open the context menu, then choose Update.
2a desktop%2Fui%2Fupdatedialog%2FDESCRIPTIONS 95 While checking for updates, you see a progress indicator. Wait for some messages to show up in the dialog, or click Cancel to abort the update check.
25 desktop%2Fui%2Fupdatedialog%2FINSTALL 54 When you click the Install button the Download and Installation dialog is displayed.
10 .uno%3AInsertRLM 92 Inserts a text direction mark that affects the text direction of any text following the mark. Available when complex text layout (CTL) is enabled.
10 .uno%3AInsertLRM 92 Inserts a text direction mark that affects the text direction of any text following the mark. Available when complex text layout (CTL) is enabled.
11 .uno%3AInsertZWSP a9 Inserts an invisible space within a word that will insert a line break once it becomes the last character in a line. Available when complex text layout (CTL) is enabled.
1d .uno%3AInsertNonBreakingSpace 4c Inserts a space that will keep bordering characters together on line breaks.
13 .uno%3AInsertZWNBSP 94 Inserts an invisible space within a word that will keep the word together at the end of a line. Available when complex text layout (CTL) is enabled.
17 .uno%3AInsertSoftHyphen 80 Inserts an invisible hyphen within a word that will appear and create a line break once it becomes the last character in a line.
19 .uno%3AFormattingMarkMenu 51 Opens a submenu to insert special formatting marks. Enable CTL for more commands.
17 .uno%3AInsertHardHyphen 4d Inserts a hyphen that will keep bordering characters together on line breaks.
14 HID_GALLERY_NEWTHEME 56 Adds a new theme to the Gallery and lets you choose the files to include in the theme.
12 HID_GALLERY_WINDOW 52 To insert a Gallery object, select the object, and then drag it into the document.
14 HID_GALLERY_ICONVIEW 2e Displays the contents of the Gallery as icons.
15 HID_GALLERY_THEMELIST 3c Click a theme to view the objects associated with the theme.
14 HID_GALLERY_LISTVIEW 55 Displays the contents of the Gallery as small icons, with title and path information.
e .uno%3AGallery 70 Opens the Gallery deck of the Sidebar, where you can select images and audio clips to insert into your document.
25 cui%2Fui%2Fgalleryfilespage%2Fpreview 31 Displays or hides a preview of the selected file.
26 cui%2Fui%2Fgalleryfilespage%2Ffiletype 2d Select the type of file that you want to add.
23 cui%2Fui%2Fgalleryfilespage%2Ffiles 8b Lists the available files. Select the file(s) that you want to add, and then click Add. To add all of the files in the list, click Add All.
13 HID_GALLERY_PREVIEW 28 Displays a preview of the selected file.
27 cui%2Fui%2Fgalleryfilespage%2Ffindfiles 52 Locate the directory containing the files that you want to add, and then click OK.
24 cui%2Fui%2Fgalleryfilespage%2Faddall 37 Adds all of the files in the list to the current theme.
21 cui%2Fui%2Fgalleryfilespage%2Fadd 2f Adds the selected file(s) to the current theme.
f .uno%3AGridMenu 26 Sets the display properties of a grid.
15 .uno%3AHelplinesFront 45 Displays the snap lines in front of the objects on the slide or page.
13 .uno%3AHelplinesUse 45 Displays the snap lines in front of the objects on the slide or page.
17 .uno%3AHelplinesVisible 45 Displays the snap lines in front of the objects on the slide or page.
14 .uno%3ASnapLinesMenu 2d Specifies the display options for snap lines.
14 .uno%3AAVMediaPlayer 82 Opens the Media Player window where you can preview movie and sound files as well as insert these files into the current document.
25 vnd.sun.star.findbar%3AFocusToFindbar 5f Toggle the visibility of the Find toolbar to search for text or navigate a document by element.
e .uno%3ASidebar a4 The Sidebar is a vertical graphical user interface that primarily provides contextual properties, style management, document navigation, and media gallery features.
14 .uno%3AInsertAVMedia 31 Inserts a video or audio file into your document.
36 desktop%3ACheckBox%3ATP_UPDATE_CHECK%3ACB_UPDATE_CHECK 34 You can check for updates manually or automatically.
2b cui%2Fui%2Foptonlineupdatepage%2Fchangepath 2f Click to select a folder to download the files.
2d cui%2Fui%2Foptonlineupdatepage%2Fautodownload 90 Mark to enable the automatic check for updates. Choose %PRODUCTNAME - Online Update in the Options dialog box to disable or enable this feature.
24 EXTENSIONS_HID_CHECK_FOR_UPD_INSTALL 1f Installs the downloaded update.
21 SFX2_HID_DLG_CHECKFORONLINEUPDATE f2 Checks for available updates to your version of %PRODUCTNAME. If a newer version is available, you can choose to download the update. After downloading, if you have write permissions for the installation directory, you can install the update.
23 EXTENSIONS_HID_CHECK_FOR_UPD_CANCEL 3b Aborts the download and deletes the partly downloaded file.
20 EXTENSIONS_HID_CHECK_FOR_UPD_DLG f2 Checks for available updates to your version of %PRODUCTNAME. If a newer version is available, you can choose to download the update. After downloading, if you have write permissions for the installation directory, you can install the update.
23 EXTENSIONS_HID_CHECK_FOR_UPD_RESUME 1c Continues a paused download.
26 EXTENSIONS_HID_CHECK_FOR_UPD_DOWNLOAD2 9c Downloads and saves the update files to the desktop or a folder of your choice. Select the folder in %PRODUCTNAME - Online Update in the Options dialog box.
22 EXTENSIONS_HID_CHECK_FOR_UPD_PAUSE 40 Pauses the download. Later click Resume to continue downloading.
25 EXTENSIONS_HID_CHECK_FOR_UPD_DOWNLOAD 9c Downloads and saves the update files to the desktop or a folder of your choice. Select the folder in %PRODUCTNAME - Online Update in the Options dialog box.
2d DESKTOP_HID_EXTENSION_MANAGER_LISTBOX_OPTIONS 57 Select an installed extension, then click to open the Options dialog for the extension.
2d DESKTOP_HID_EXTENSION_MANAGER_LISTBOX_DISABLE 20 Enable or disable the extension.
5 42772 5c The Extension Manager adds, removes, disables, enables, and updates %PRODUCTNAME extensions.
5 42769 7b Select the extension that you want to remove, enable, or disable. For some extensions, you can also open an Options dialog.
a 2180256279 46 Select the extension that you want to disable, and then click Disable.
a 2180256278 44 Select the extension that you want to enable, and then click Enable.
a 2180256277 44 Select the extension that you want to remove, and then click Remove.
a 2180256276 1e Click Add to add an extension.
34 desktop%2Fui%2Fshowlicensedialog%2FShowLicenseDialog 87 Read the license. Click the Scroll Down button to scroll down if necessary. Click Accept to continue the installation of the extension.
1e cui%2Fui%2Fpassword%2Fexpander 38 Click to show or hide the file sharing password options.
26 uui%2Fui%2Fpassword%2FconfirmpassEntry 16 Re-enter the password.
20 sfx%2Fui%2Fpassword%2Fconfirm1ed 16 Re-enter the password.
20 sfx%2Fui%2Fpassword%2Fconfirm2ed 16 Re-enter the password.
10 HID_PASSWD_TABLE 2e Type a password. A password is case sensitive.
11 SC_HID_PASSWD_DOC 16 Re-enter the password.
2b uui%2Fui%2Fsetmasterpassworddlg%2Fpassword2 1d Re-enter the master password.
2b uui%2Fui%2Fsetmasterpassworddlg%2Fpassword1 55 Type a master password to prevent unauthorized users from accessing stored passwords.
39 uui%2Fui%2Fsetmasterpassworddlg%2FSetMasterPasswordDialog 43 Assign a master password to protect the access to a saved password.
1f filter%2Fui%2Fpdfsignpage%2Ftsa 44 Allows you to optionally select a Time Stamping Authority (TSA) URL.
24 filter%2Fui%2Fpdfsignpage%2Flocation 44 Allows you to optionally select a Time Stamping Authority (TSA) URL.
24 filter%2Fui%2Fpdfsignpage%2Fpassword 60 Enter the password used for protecting the private key associated with the selected certificate.
27 filter%2Fui%2Fpdfsignpage%2Fpdfsignpage 4a Allows you to select a certificate to be used for signing this PDF export.
2a filter%2Fui%2Fpdfsecuritypage%2Fenablecopy 35 Select to enable copying of content to the clipboard.
2d filter%2Fui%2Fpdfsecuritypage%2Fchangecomment 38 Only commenting and filling in form fields is permitted.
2a filter%2Fui%2Fpdfsecuritypage%2Fchangeform 29 Only filling in form fields is permitted.
2c filter%2Fui%2Fpdfsecuritypage%2Fchangeinsdel 3a Only inserting, deleting, and rotating pages is permitted.
29 filter%2Fui%2Fpdfsecuritypage%2Fprinthigh 2f The document can be printed in high resolution.
22 filter%2Fui%2Fpdfsignpage%2Fselect 24 Opens the Select Certificate dialog.
29 filter%2Fui%2Fpdfsecuritypage%2Fprintnone 27 Printing the document is not permitted.
2f filter%2Fui%2Fpdfsecuritypage%2FPdfSecurityPage 35 Click to open a dialog where you enter the passwords.
24 filter%2Fui%2Fpdflinkspage%2Fopenpdf c2 Cross-document links are opened with the PDF reader application that currently shows the document. The PDF reader application must be able to handle the specified file type inside the hyperlink.
25 filter%2Fui%2Fpdfgeneralpage%2Fformat 3f Select the format of submitting forms from within the PDF file.
28 filter%2Fui%2Fpdfsecuritypage%2Fprintlow 65 The document can only be printed in low resolution (150 dpi). Not all PDF readers honor this setting.
29 filter%2Fui%2Fpdfgeneralpage%2Fresolution 2c Select the target resolution for the images.
23 filter%2Fui%2Fpdfsignpage%2Fcontact 44 Allows you to optionally select a Time Stamping Authority (TSA) URL.
2c filter%2Fui%2Fpdfuserinterfacepage%2Feffects 4c Select to export Impress slide transition effects to respective PDF effects.
24 filter%2Fui%2Fpdfviewpage%2Fpageonly 40 Select to generate a PDF file that shows only the page contents.
2a filter%2Fui%2Fpdfsecuritypage%2Fenablea11y 35 Select to enable text access for accessibility tools.
28 filter%2Fui%2Fpdfgeneralpage%2Fallowdups 98 Allows to use the same field name for multiple fields in the generated PDF file. If disabled, field names will be exported using generated unique names.
24 filter%2Fui%2Fpdflinkspage%2Fdefault 6c Links from your PDF document to other documents will be handled as it is specified in your operating system.
22 filter%2Fui%2Fpdfviewpage%2Fthumbs 54 Select to generate a PDF file that shows a thumbnails palette and the page contents.
2c filter%2Fui%2Fpdfuserinterfacepage%2Ftoolbar 40 Select to hide the reader's toolbar when the document is active.
29 filter%2Fui%2Fpdfsecuritypage%2Fchangeany 33 All changes are permitted, except extracting pages.
27 filter%2Fui%2Fpdfgeneralpage%2Fcomments 44 Select to export comments of Writer and Calc documents as PDF notes.
27 FILTER_EDIT_RID_PDF_EXPORT_DLG_ED_PAGES 45 Saves the current file to Portable Document Format (PDF) version 1.4.
23 filter%2Fui%2Fpdfgeneralpage%2Fpdfa ea Converts to the PDF/A-1a format. This is defined as an electronic document file format for long term preservation. All fonts that were used in the source document will be embedded into the generated PDF file. PDF tags will be written.
27 filter%2Fui%2Fpdfviewpage%2FPdfViewPage 40 Select to generate a PDF file that shows only the page contents.
24 filter%2Fui%2Fpdfgeneralpage%2Fembed 68 This setting enables you to export the document as a .pdf file containing two file formats: PDF and ODF.
24 filter%2Fui%2Fpdfgeneralpage%2Fpages 26 Exports the pages you type in the box.
26 filter%2Fui%2Fpdflinkspage%2Fexporturl 82 Enable this checkbox to export URLs to other documents as relative URLs in the file system. See "relative hyperlinks" in the Help.
22 filter%2Fui%2Fpdfgeneralpage%2Fall 5c Exports all defined print ranges. If no print range is defined, exports the entire document.
24 filter%2Fui%2Fpdfgeneralpage%2Fforms 60 Choose to create a PDF form. This can be filled out and printed by the user of the PDF document.
28 filter%2Fui%2Fpdfviewpage%2Fsinglelayout 3c Select to generate a PDF file that shows one page at a time.
25 filter%2Fui%2Fpdfgeneralpage%2Ftagged 46 Select to write PDF tags. This can increase file size by huge amounts.
2b filter%2Fui%2Fpdfgeneralpage%2Fjpegcompress ca Selects a JPEG compression of images. With a high quality level, almost all pixels are preserved. With a low quality level, some pixels get lost and artefacts are introduced, but file sizes are reduced.
29 filter%2Fui%2Fpdfuserinterfacepage%2Fopen 69 Select to generate a PDF file that is shown in a full screen reader window in front of all other windows.
2f filter%2Fui%2Fpdfgeneralpage%2Freduceresolution 50 Select to resample or down-size the images to a lower number of pixels per inch.
28 filter%2Fui%2Fpdfgeneralpage%2Fbookmarks ef Select to export bookmarks of Writer documents as PDF bookmarks. Bookmarks are created for all outline paragraphs (Tools - Outline Numbering) and for all table of contents entries for which you did assign hyperlinks in the source document.
2c filter%2Fui%2Fpdfviewpage%2Fcontfacinglayout 96 Select to generate a PDF file that shows pages side by side in a continuous column. For more than two pages, the first page is displayed on the right.
28 filter%2Fui%2Fpdfgeneralpage%2Fselection 1e Exports the current selection.
29 filter%2Fui%2Fpdflinkspage%2FPdfLinksPage 141 The bookmarks (targets of references) in PDF files can be defined as rectangular areas. Additionally, bookmarks to named objects can be defined by their names. Enable the checkbox to export the names of objects in your document as valid bookmark targets. This allows to link to those objects by name from other documents.
2f filter%2Fui%2Fpdfgeneralpage%2Flosslesscompress 43 Selects a lossless compression of images. All pixels are preserved.
20 filter%2Fui%2Fpdfviewpage%2Fpage 41 Select to show the given page when the reader opens the PDF file.
2a filter%2Fui%2Fpdfsecuritypage%2Fchangenone 28 No changes of the content are permitted.
23 filter%2Fui%2Fpdfviewpage%2Foutline 53 Select to generate a PDF file that shows a bookmarks palette and the page contents.
29 filter%2Fui%2Fpdfgeneralpage%2Femptypages 18a If switched on, automatically inserted blank pages are exported to pdf file. This is best if you are printing the pdf file double-sided. Example: In a book a chapter paragraph style is set to always start with an odd numbered page. The previous chapter ends on an odd page. %PRODUCTNAME inserts an even numbered blank page. This option controls whether to export that even numbered page or not.
20 filter%2Fui%2Fpdfsignpage%2Fcert 4a Allows you to select a certificate to be used for signing this PDF export.
26 filter%2Fui%2Fpdfgeneralpage%2Fquality 2d Enter the quality level for JPEG compression.
24 filter%2Fui%2Fpdfgeneralpage%2Frange 26 Exports the pages you type in the box.
26 filter%2Fui%2Fpdfviewpage%2Ffitdefault b7 Select to generate a PDF file that shows the page contents without zooming. If the reader software is configured to use a zoom factor by default, the page shows with that zoom factor.
22 filter%2Fui%2Fpdfviewpage%2Ffitwin 62 Select to generate a PDF file that shows the page zoomed to fit entirely into the reader's window.
24 filter%2Fui%2Fpdfviewpage%2Ffitwidth 61 Select to generate a PDF file that shows the page zoomed to fit the width of the reader's window.
20 filter%2Fui%2Fpdfviewpage%2Fzoom 3e Select a given zoom factor when the reader opens the PDF file.
31 filter%2Fui%2Fpdfuserinterfacepage%2Fvisiblelevel 5d Select to show bookmark levels down to the selected level when the reader opens the PDF file.
22 filter%2Fui%2Fpdfviewpage%2Ffitvis 7a Select to generate a PDF file that shows the text and graphics on the page zoomed to fit the width of the reader's window.
29 filter%2Fui%2Fpdflinkspage%2Fopeninternet 94 Cross-document links are opened with the Internet browser. The Internet browser must be able to handle the specified file type inside the hyperlink.
24 filter%2Fui%2Fpdflinkspage%2Fconvert d2 Enable this checkbox to convert the URLs referencing other ODF files to PDF files with the same name. In the referencing URLs the extensions .odt, .odp, .ods, .odg, and .odm are converted to the extension .pdf.
23 filter%2Fui%2Fpdfviewpage%2Ffitzoom 3e Select a given zoom factor when the reader opens the PDF file.
29 filter%2Fui%2Fpdfviewpage%2Fdefaultlayout 6a Select to generate a PDF file that shows the pages according to the layout setting of the reader software.
27 filter%2Fui%2Fpdfviewpage%2Ffirstonleft 101 Select to generate a PDF file that shows pages side by side in a continuous column. For more than two pages, the first page is displayed on the left. You must enable support for complex text layout on Language settings - Languages in the Options dialog box.
2c filter%2Fui%2Fpdfuserinterfacepage%2Fdisplay 5e Select to generate a PDF file that is shown with the document title in the reader's title bar.
39 filter%2Fui%2Fpdfuserinterfacepage%2FPdfUserInterfacePage 5a Select to generate a PDF file that is shown in a window displaying the whole initial page.
26 filter%2Fui%2Fpdfviewpage%2Fcontlayout 4f Select to generate a PDF file that shows pages in a continuous vertical column.
2b filter%2Fui%2Fpdfuserinterfacepage%2Fresize 5a Select to generate a PDF file that is shown in a window displaying the whole initial page.
2b filter%2Fui%2Fpdfuserinterfacepage%2Fcenter 52 Select to generate a PDF file that is shown in a reader window centered on screen.
2b filter%2Fui%2Fpdfsecuritypage%2Fsetpassword 35 Click to open a dialog where you enter the passwords.
2c filter%2Fui%2Fpdfuserinterfacepage%2Fmenubar 41 Select to hide the reader's menu bar when the document is active.
23 filter%2Fui%2Fpdflinkspage%2Fexport 141 The bookmarks (targets of references) in PDF files can be defined as rectangular areas. Additionally, bookmarks to named objects can be defined by their names. Enable the checkbox to export the names of objects in your document as valid bookmark targets. This allows to link to those objects by name from other documents.
2b filter%2Fui%2Fpdfuserinterfacepage%2Fwindow 41 Select to hide the reader's controls when the document is active.
34 filter%2Fui%2Fpdfuserinterfacepage%2Fvisiblebookmark 5d Select to show bookmark levels down to the selected level when the reader opens the PDF file.
22 filter%2Fui%2Fpdfsignpage%2Freason 44 Allows you to optionally select a Time Stamping Authority (TSA) URL.
31 filter%2Fui%2Fpdfuserinterfacepage%2Fallbookmarks 46 Select to show all bookmark levels when the reader opens the PDF file.
17 .uno%3ASendMailDocAsPDF a6 Shows the Export as PDF dialog, exports the current document to Portable Document Format (PDF), and then opens an e-mail sending window with the PDF as an attachment.
23 uui%2Fui%2Fmacrowarnmedium%2Fcancel 2d Does not allow macros in the document to run.
1f uui%2Fui%2Fmacrowarnmedium%2Fok 25 Allows macros in the document to run.
23 SFX2_HID_WARNING_SECURITY_HYPERLINK 6a Enable or disable the macros. Choose %PRODUCTNAME - Security in the Options dialog box to set the options.
2c uui%2Fui%2Fmacrowarnmedium%2FviewSignsButton 30 Opens a dialog where you can view the signature.
2c uui%2Fui%2Fmacrowarnmedium%2FMacroWarnMedium 6a Enable or disable the macros. Choose %PRODUCTNAME - Security in the Options dialog box to set the options.
33 uui%2Fui%2Fmacrowarnmedium%2FalwaysTrustCheckbutton 3d Adds the current macro source to the list of trusted sources.
21 xmlsec%2Fui%2Fcertpage%2Fviewcert 51 Opens the View Certificate dialog where you can examine the selected certificate.
43 xmlsecurity%3APushButton%3ARID_XMLSECDLG_CERTCHOOSER%3ABTN_VIEWCERT 51 Opens the View Certificate dialog where you can examine the selected certificate.
2c XMLSECURITY_HID_XMLSEC_CTRL_CHOOSESIGNATURES 51 Select the certificate that you want to digitally sign the current document with.
e .uno%3AWebHtml 95 Creates a temporary copy of the current document in HTML format, opens the system default Web browser, and displays the HTML file in the Web browser.
27 svx%2Fui%2Fxformspage%2FTBI_ITEM_REMOVE 47 Deletes the selected item (element, attribute, submission, or binding).
25 svx%2Fui%2Fxformspage%2FTBI_ITEM_EDIT 56 Opens a dialog to edit the selected item (element, attribute, submission, or binding).
20 SVX_HID_XFORMS_TOOLBOX_ITEM_EDIT 56 Opens a dialog to edit the selected item (element, attribute, submission, or binding).
27 svx%2Fui%2Fdatanavigator%2Fmodelsbutton 29 Adds, renames, and removes XForms models.
2c svx%2Fui%2Fxformspage%2FTBI_ITEM_ADD_ELEMENT 70 Opens a dialog to add a new item (element, attribute, submission, or binding) as a sub-item of the current item.
25 svx%2Fui%2Fdatanavigator%2Fmodelsedit 21 Renames the selected Xform model.
29 SVX_HID_XFORMS_TOOLBOX_ITEM_ADD_ATTRIBUTE 70 Opens a dialog to add a new item (element, attribute, submission, or binding) as a sub-item of the current item.
20 svx%2Fui%2Faddmodeldialog%2Fname f Enter the name.
24 svx%2Fui%2Fdatanavigator%2Fmodelsadd 3c Opens the Add Model dialog where you can add an XForm model.
1f SVX_HID_XFORMS_TOOLBOX_ITEM_ADD 70 Opens a dialog to add a new item (element, attribute, submission, or binding) as a sub-item of the current item.
27 svx%2Fui%2Fdatanavigator%2Fmodelsremove 43 Deletes the selected XForm model. You cannot delete the last model.
22 SVX_HID_XFORMS_TOOLBOX_ITEM_REMOVE 47 Deletes the selected item (element, attribute, submission, or binding).
18 .uno%3AShowDataNavigator 3c Specifies the data structure of the current XForms document.
28 svx%2Fui%2Fdatanavigator%2FDataNavigator 3c Specifies the data structure of the current XForms document.
25 svx%2Fui%2Fdatanavigator%2Fmodelslist 2e Selects the XForms model that you want to use.
2b svx%2Fui%2Fdatanavigator%2Finstancesdetails 2d Switches the display to show or hide details.
1d svx%2Fui%2Fxformspage%2Fitems 34 Lists the items that belong to the current instance.
1f svx%2Fui%2Fxformspage%2Ftoolbar 3c Specifies the data structure of the current XForms document.
27 svx%2Fui%2Fdatanavigator%2Finstancesadd 30 Opens a dialog where you can add a new instance.
24 svx%2Fui%2Fdatanavigator%2Finstances 3a This button has submenus to add, edit or remove instances.
28 svx%2Fui%2Fdatanavigator%2Finstancesedit 39 Opens a dialog where you can modify the current instance.
22 svx%2Fui%2Faddmodeldialog%2Fmodify d4 When enabled, the document status will be set to "modified" when you change any form control that is bound to any data in the model. When not enabled, such a change does not set the document status to "modified".
2a svx%2Fui%2Fdatanavigator%2Finstancesremove 42 Deletes the current instance. You cannot delete the last instance.
27 SVX_HID_XFORMS_TOOLBOX_ITEM_ADD_ELEMENT 70 Opens a dialog to add a new item (element, attribute, submission, or binding) as a sub-item of the current item.
2e svx%2Fui%2Fxformspage%2FTBI_ITEM_ADD_ATTRIBUTE 70 Opens a dialog to add a new item (element, attribute, submission, or binding) as a sub-item of the current item.
24 svx%2Fui%2Fxformspage%2FTBI_ITEM_ADD 70 Opens a dialog to add a new item (element, attribute, submission, or binding) as a sub-item of the current item.
23 EXTENSIONS_HID_PROP_XSD_CALCULATION 25 Declares that the item is calculated.
28 svx%2Fui%2Fadddataitemdialog%2Fcalculate 25 Declares that the item is calculated.
27 svx%2Fui%2Fadddataitemdialog%2Freadonly 1f Declares the item as read-only.
22 EXTENSIONS_HID_PROP_XSD_CONSTRAINT 22 Declares the item as a constraint.
27 svx%2Fui%2Fadddataitemdialog%2Fdatatype 2b Select the data type for the selected item.
2b svx%2Fui%2Fadddataitemdialog%2Frequiredcond 1e Declares the item as relevant.
23 svx%2Fui%2Fadddataitemdialog%2Fname 1b Enter the name of the item.
29 svx%2Fui%2Fadddataitemdialog%2Fconstraint 22 Declares the item as a constraint.
24 svx%2Fui%2Fadddataitemdialog%2Fvalue 2c Enter a default value for the selected item.
30 svx%2Fui%2Fadddataitemdialog%2FAddDataItemDialog 48 Adds a new item or edits the selected item in the XForms Data Navigator.
27 svx%2Fui%2Fadddataitemdialog%2Frelevant 1e Declares the item as relevant.
20 EXTENSIONS_HID_PROP_XSD_READONLY 1f Declares the item as read-only.
2d svx%2Fui%2Fadddataitemdialog%2Fconstraintcond 1f Declares the item as read-only.
27 svx%2Fui%2Fadddataitemdialog%2Frequired 34 Specifies if the item must be included on the XForm.
20 EXTENSIONS_HID_PROP_XSD_RELEVANT 1e Declares the item as relevant.
20 EXTENSIONS_HID_PROP_XSD_REQUIRED 34 Specifies if the item must be included on the XForm.
2b svx%2Fui%2Fadddataitemdialog%2Freadonlycond 25 Declares that the item is calculated.
2b svx%2Fui%2Fadddataitemdialog%2Frelevantcond 22 Declares the item as a constraint.
29 svx%2Fui%2Faddconditiondialog%2Fcondition 12 Enter a condition.
24 svx%2Fui%2Faddconditiondialog%2Fedit 4f Opens the Form Namespaces dialog where you can add, edit, or delete namespaces.
32 svx%2Fui%2Faddconditiondialog%2FAddConditionDialog 5b Add a condition in this subdialog of the Add Item / Edit Item dialog of the Data Navigator.
23 svx%2Fui%2Fnamespacedialog%2Fdelete 1f Deletes the selected namespace.
21 svx%2Fui%2Fnamespacedialog%2Fedit 1d Edits the selected namespace.
20 svx%2Fui%2Fnamespacedialog%2Fadd 21 Adds a new namespace to the list.
27 svx%2Fui%2Fnamespacedialog%2Fnamespaces 34 Lists the currently defined namespaces for the form.
22 EXTENSIONS_HID_PROP_XSD_MAX_LENGTH 38 Specifies the maximum number of characters for a string.
25 EXTENSIONS_HID_PROP_XSD_MAX_EXCLUSIVE 2e Specifies an exclusive upper bound for values.
25 EXTENSIONS_HID_PROP_XSD_MAX_INCLUSIVE 2e Specifies an inclusive upper bound for values.
24 EXTENSIONS_HID_PROP_XSD_TOTAL_DIGITS 5b Specifies the maximum total number of digits that values of the decimal data type can have.
21 EXTENSIONS_UID_PROP_ADD_DATA_TYPE ac Click the button to open a dialog where you can enter the name of a new user-defined data type. The new data type inherits all facets from the currently selected data type.
23 EXTENSIONS_HID_PROP_BIND_EXPRESSION e7 Enter the DOM node what's a DOM node? spec doesn't tellto bind the control model towhat's a control model? spec doesn't tell. may be a typo in spec: control's model?. Click the ... button for a dialog to enter the XPath expression.
27 EXTENSIONS_HID_PROP_XSD_FRACTION_DIGITS 66 Specifies the maximum total number of fractional digits that values of the decimal data type can have.
24 EXTENSIONS_UID_PROP_REMOVE_DATA_TYPE 5a Select a user-defined data type and click the button to delete the user-defined data type.
25 EXTENSIONS_HID_PROP_XSD_MIN_EXCLUSIVE 2e Specifies an exclusive lower bound for values.
25 EXTENSIONS_HID_PROP_XSD_MIN_INCLUSIVE 2e Specifies an inclusive lower bound for values.
20 EXTENSIONS_HID_PROP_BINDING_NAME d1 Select or enter the name of a binding. Selecting the name of an existing binding associates the binding with the form control. Entering a new name creates a new binding and associates it with the form control.
1e EXTENSIONS_HID_PROP_XSD_LENGTH 30 Specifies the number of characters for a string.
1f EXTENSIONS_HID_PROP_XSD_PATTERN 125 Specifies a regular expression pattern. Strings validated against the data type must conform to this pattern to be valid. The XSD data type syntax for regular expressions is different from the regular expression syntax used elseswhere in %PRODUCTNAME, for example in the Find & Replace dialog.
20 EXTENSIONS_HID_PROP_XSD_REQUIRED 34 Specifies if the item must be included on the XForm.
20 EXTENSIONS_HID_PROP_XSD_RELEVANT 1e Declares the item as relevant.
20 EXTENSIONS_HID_PROP_XSD_READONLY 1f Declares the item as read-only.
22 EXTENSIONS_HID_PROP_XML_DATA_MODEL 43 Select a model from the list of all models in the current document.
22 EXTENSIONS_HID_PROP_XSD_CONSTRAINT 22 Declares the item as a constraint.
23 EXTENSIONS_HID_PROP_XSD_WHITESPACES f3 Specifies how whitespaces are to be handled when a string of the current data type is being processed. Possible values are Preserve, Replace, and Collapse. The semantics follow the definition at http://www.w3.org/TR/xmlschema-2/#rf-whiteSpace.
23 EXTENSIONS_HID_PROP_XSD_CALCULATION 25 Declares that the item is calculated.
21 EXTENSIONS_HID_PROP_XSD_DATA_TYPE 41 Select a data type which the control should be validated against.
13 .uno%3APrintDefault 68 Click the Print File Directly icon to print the active document with the current default print settings.
16 .uno%3AVerticalCaption 1ab Draws a line that ends in a rectangular callout with vertical text direction from where you drag in the current document. Drag a handle of the callout to resize the callout. To add text, click the edge of the callout, and then type or paste your text. To change a rectangular callout to a rounded callout, drag the largest corner handle when the pointer changes to a hand. Only available when Asian language support is enabled.
13 .uno%3AText_Marquee c8 Inserts animated text with horizontal text direction into the current document. Drag a text box, and then type or paste your text. To assign an animation effect, choose Format - Text - Text Animation.
f .uno%3ADrawText e1 Draws a text box with horizontal text direction where you drag in the current document. Drag a text box to the size you want anywhere in the document, and then type or paste your text. Rotate the text box to get rotated text.
e .uno%3AEllipse ad Draws an oval where you drag in the current document. Click where you want to draw the oval, and drag to the size you want. To draw a circle, hold down Shift while you drag.
13 .uno%3AVerticalText 14a Draws a text box with vertical text direction where you click or drag in the current document. Click anywhere in the document, and then type or paste your text. You can also move the cursor to where you want to add the text, drag a text box, and then type or paste your text. Only available when Asian language support is enabled.
11 .uno%3AInsertDraw 74 Click to open or close the Drawing bar, where you can add shapes, lines, text, and callouts to the current document.
b .uno%3ARect c3 Draws a rectangle where you drag in the current document. To draw a square, hold down Shift while you drag. Click where you want to place a corner of the rectangle, and drag to the size you want.
b .uno%3ALine 82 Draws a straight line where you drag in the current document. To constrain the line to 45 degrees, hold down Shift while you drag.
12 .uno%3ADrawCaption 176 Draws a line that ends in a rectangular callout with horizontal text direction from where you drag in the current document. Drag a handle of the callout to resize the callout. To add text, click the edge of the callout, and then type or paste your text. To change a rectangular callout to a rounded callout, drag the largest corner handle when the pointer changes to a hand.
16 .uno%3ABezier_Unfilled 15c Draws a smooth Bezier curve. Click where you want the curve to start, drag, release, and then move the pointer to where you want the curve to end and click. Move the pointer and click again to add a straight line segment to the curve. Double-click to finish drawing the curve. To create a closed shape, double click the starting point of the curve.
17 .uno%3APolygon_Unfilled 125 Draws a line composed of a series of straight line segments. Drag to draw a line segment, click to define the endpoint of the line segment, and then drag to draw a new line segment. Double-click to finish drawing the line. To create a closed shape, double-click the starting point of the line.
10 .uno%3ACircleCut 1a6 Draws a filled shape that is defined by the arc of a circle and a diameter line in the current document. To draw a circle segment, drag a circle to the size you want, and then click to define the starting point of the diameter line. Move your pointer to where you want to place the endpoint of the diameter line and click. You do not need to click on the circle. To draw an ellipse segment, hold down Shift while you drag.
a .uno%3AArc 145 Draws an arc in the current document. To draw an arc, drag an oval to the size you want, and then click to define the starting point of the arc. Move your pointer to where you want to place the endpoint and click. You do not need to click on the oval. To draw an arc that is based on a circle, hold down Shift while you drag.
a .uno%3APie 17e Draws a filled shape that is defined by the arc of an oval and two radius lines in the current document. To draw an ellipse pie, drag an oval to the size you want, and then click to define the first radius line. Move your pointer to where you want to place the second radius line and click. You do not need to click on the oval. To draw a circle pie, hold down Shift while you drag.
18 .uno%3AFreeline_Unfilled be Draws a freeform line where you drag in the current document. To end the line, release the mouse button. To draw a closed shape, release the mouse button near the starting point of the line.
16 .uno%3AFormDesignTools 1e Opens the Form Design toolbar.
15 .uno%3AFormattedField 1a Creates a formatted field.
f .uno%3ACheckBox 14 Creates a check box.
d .uno%3AConfig 55 The Form Controls toolbar contains tools that you need to create an interactive form.
11 .uno%3APushbutton 16 Creates a push button.
b .uno%3AEdit 13 Creates a text box.
12 .uno%3ARadioButton 19 Creates an option button.
e .uno%3AListBox 13 Creates a list box.
f .uno%3AComboBox 14 Creates a combo box.
c .uno%3ALabel 24 Creates a field for displaying text.
13 .uno%3AMoreControls 20 Opens the More Controls toolbar.
19 .uno%3AConvertToFormatted 3b The selected control is transformed into a formatted field.
17 .uno%3AConvertToNumeric 3b The selected control is transformed into a numerical field.
14 .uno%3AConvertToTime 36 The selected control is transformed into a time field.
18 .uno%3AConvertToCurrency 3a The selected control is transformed into a currency field.
14 .uno%3AConvertToDate 36 The selected control is transformed into a date field.
16 .uno%3AConvertToButton 32 The selected control is transformed into a button.
1c .uno%3AConvertToImageControl 3a The selected control is transformed into an image control.
14 .uno%3AConvertToEdit 34 The selected control is transformed into a text box.
17 .uno%3AConvertToPattern 39 The selected control is transformed into a pattern field.
18 .uno%3AChangeControlType 64 Calls a submenu where you can select a control type to replace the control selected in the document.
18 .uno%3AConvertToCheckBox 35 The selected control is transformed into a check box.
14 .uno%3AConvertToList 34 The selected control is transformed into a list box.
15 .uno%3AConvertToRadio 3a The selected control is transformed into an option button.
15 .uno%3AConvertToCombo 35 The selected control is transformed into a combo box.
15 .uno%3AConvertToFixed 31 The selected control is transformed into a label.
1b .uno%3AConvertToFileControl 3a The selected control is transformed into a file selection.
18 .uno%3AConvertToImageBtn 39 The selected control is transformed into an image button.
14 SID_FM_SHOWCOLS_MORE 1e Calls the Show Columns dialog.
10 SID_FM_INSERTCOL 48 Calls a submenu to select a data field to adopt it in the table control.
28 cui%2Fui%2Fshowcoldialog%2FShowColDialog 7e In the Show Columns dialog you can select the columns to be shown. Hold down the Shift or Ctrl key to select multiple entries.
10 SID_FM_CHANGECOL 5f Opens a submenu to select a data field to replace the data field selected in the table control.
12 SID_FM_SHOWALLCOLS 2a Click All if you want to show all columns.
f SID_FM_SHOWCOLS 3f Calls a submenu where you can select the columns to show again.
10 SID_FM_DELETECOL 26 Deletes the currently selected column.
e SID_FM_HIDECOL 1a Hides the selected column.
18 .uno%3AControlProperties 40 Opens a dialog for editing the properties of a selected control.
22 EXTENSIONS_HID_PROP_ENABLE_VISIBLE 68 Defines whether the control will be visible in live mode. In design mode, the control is always visible.
5 37927 52 Specifies whether the icons in a selected Navigation Bar should be small or large.
13 HID_PROP_TIMEFORMAT 37 You can define the desired format for the time display.
22 EXTENSIONS_HID_PROP_LINEEND_FORMAT 5e For text fields, select the line end code to be used when writing text into a database column.
d HID_PROP_FONT 3a Select the font for the text that is in the control field.
15 HID_PROP_HIDDEN_VALUE 3f You can enter the data that is inherited by the hidden control.
17 HID_PROP_CURRENCYSYMBOL 3e You can enter a character or a string for the currency symbol.
13 HID_PROP_TARGET_URL 59 Specifies the URL address that opens when you click an "Open document / web page" button.
5 37928 55 Specifies to show or hide the positioning items in a selected Navigation Bar control.
17 HID_PROP_DEFAULT_BUTTON 73 The Default button property specifies that the corresponding button will be operated when you press the Return key.
18 EXTENSIONS_HID_PROP_TEXT 34 Sets the default text for a text box or a combo box.
20 EXTENSIONS_HID_PROP_DEFAULT_DATE 16 Sets the default date.
22 EXTENSIONS_HID_PROP_BLOCKINCREMENT 5e Specify the value to add or subtract when the user clicks next to the slider on the scrollbar.
21 EXTENSIONS_HID_PROP_LINEINCREMENT 5a Specify the value to add or subtract when the user clicks the arrow icon on the scrollbar.
18 HID_PROP_SCROLLVALUE_MIN 31 Specify the minimum value of a scrollbar control.
18 HID_PROP_SCROLLVALUE_MAX 31 Specify the maximum value of a scrollbar control.
1c HID_PROP_DEFAULT_SCROLLVALUE 29 Sets the default value for the scrollbar.
19 HID_PROP_EFFECTIVEDEFAULT 2d Sets the default value for the control field.
1b HID_PROP_DEFAULT_SELECT_SEQ 3a Specifies the list box entry to mark as the default entry.
18 HID_PROP_DEFAULT_CHECKED 42 Specifies whether an option or a check box is selected by default.
22 EXTENSIONS_HID_PROP_WHEEL_BEHAVIOR 165 Sets whether the value changes when the user scrolls a mouse wheel. Never: No change of the value. When focused: (default) The value changes when the control has the focus and the wheel is pointing at the control and gets scrolled. Always: The value changes when the wheel is pointing at the control and gets scrolled, no matter which control has the focus.
11 HID_PROP_READONLY 49 Determines if the control is read-only (Yes) or if it can be edited (No).
d HID_PROP_NAME 9f On the Properties tab page, this option specifies the name for the control field. On the Form Properties tab page, this option specifies the name for the form.
19 HID_PROP_CURRSYM_POSITION 65 Determines if the currency symbol is displayed before or after the number when using currency fields.
19 HID_PROP_DECIMAL_ACCURACY 4c Determines the number of digits displayed to the right of the decimal point.
10 HID_PROP_TIMEMIN 32 Determines the minimum time that a user can enter.
15 HID_PROP_EFFECTIVEMIN 67 You can determine here a value for the control field to prevent the user from entering a smaller value.
1f EXTENSIONS_HID_PROP_ANCHOR_TYPE 2b Defines where the control will be anchored.
11 HID_PROP_TRISTATE 77 Specifies whether a check box can also represent ZERO values of a linked database apart from the TRUE and FALSE values.
c HID_PROP_TAG 4d Specifies additional information or a descriptive text for the control field.
17 HID_PROP_STRINGITEMLIST 105 Defines the list entries visible in the document. Open this list and type your text. Use Shift+Enter for a new line. With list and combo boxes, you can define the list entries that will be visible in the document. Open the List entries field and type your text.
1f EXTENSIONS_HID_PROP_VISIBLESIZE bb Specifies the size of scrollbar thumb in "value units". A value of ("Scroll value max." minus "Scroll value min." ) / 2 would result in a thumb which occupies half of the background area.
1d EXTENSIONS_HID_PROP_WORDBREAK 24 Displays text on more than one line.
1d EXTENSIONS_HID_PROP_POSITIONX 3e Defines the X position of the control, relative to the anchor.
12 HID_PROP_ROWHEIGHT 32 Specifies the row height of a table control field.
15 HID_PROP_STRICTFORMAT 5b If the strict format function is activated (Yes), only the allowed characters are accepted.
14 HID_PROP_LITERALMASK 76 Defines the literal mask. The literal mask contains the initial values and is always visible after downloading a form.
d HID_PROP_SPIN 6e The "Yes" option transforms the control field into a spin button, where corresponding arrow buttons are added.
16 HID_PROP_NAVIGATIONBAR 59 Specifies whether to display the navigation bar on the lower border of the table control.
5 37967 54 Specifies the border color for controls that have the Border property set to "flat".
10 HID_PROP_DATEMIN 33 Determines the earliest date that a user can enter.
10 HID_PROP_TABSTOP 54 The Tabstop property determines if a control field can be selected with the tab key.
19 EXTENSIONS_HID_PROP_WIDTH 21 Defines the width of the control.
15 HID_PROP_RECORDMARKER 73 Specifies whether the first column is displayed with row labels, in which the current record is marked by an arrow.
e HID_PROP_LABEL 55 The Label property sets the label of the control field that is displayed in the form.
1a EXTENSIONS_HID_PROP_HEIGHT 22 Defines the height of the control.
13 HID_PROP_BUTTONTYPE 51 The Action property determines the action that occurs when you activate a button.
12 HID_PROP_PRINTABLE 50 Specifies whether you want the control field to appear in a document's printout.
1d EXTENSIONS_HID_PROP_POSITIONY 3e Defines the Y position of the control, relative to the anchor.
5 37929 54 Specifies to show or hide the navigation items in a selected Navigation Bar control.
12 HID_PROP_VALUESTEP 21 Determines spin button intervals.
5 37933 cf Allows you to use line breaks and formatting in a control field, such as a text box or label. To manually enter a line break, press the Enter key. Select "Multi-line with formatting" to enter formatted text.
10 HID_PROP_ENABLED 69 If a control field has the property "Enabled" (Yes), the form user will be able to use the control field.
1f EXTENSIONS_HID_PROP_ORIENTATION 50 Specifies the horizontal or vertical orientation for a scrollbar or spin button.
20 EXTENSIONS_HID_PROP_DEFAULT_TIME 16 Sets the default time.
15 HID_PROP_CONTROLLABEL 32 Specifies the source for the label of the control.
13 HID_PROP_MAXTEXTLEN 41 Defines the maximum number of characters that the user can enter.
13 HID_PROP_DATEFORMAT 41 Here, you can determine the format you want for the date readout.
f HID_PROP_BORDER 62 Determines if the field's border should be displayed "Without frame", with a "3-D look" or "Flat".
12 HID_PROP_LINECOUNT 8b Specifies how many lines should be displayed in the dropdown list. This setting is only active if you chose "Yes" in the "Dropdown" option.
11 HID_PROP_HELPTEXT 5b Provides the option of entering a help text that will be displayed as a tip on the control.
e HID_PROP_WIDTH 31 Sets the column width in the table control field.
13 HID_PROP_SCALEIMAGE 31 Resizes the image to fit the size of the control.
15 HID_PROP_AUTOCOMPLETE 2d Assigns the AutoFill function to a combo box.
47 modules%2Fspropctrlr%2Fui%2Flabelselectiondialog%2FLabelSelectionDialog 5e Check the No assignment box to remove the link between a control and the assigned label field.
15 HID_PROP_REPEAT_DELAY 3d Specifies the delay in milliseconds between repeating events.
f HID_PROP_REPEAT 7d Specifies if the action of a control such as a spin button repeats when you click the control and hold the mouse button down.
5 37930 50 Specifies to show or hide the action items in a selected Navigation Bar control.
18 HID_PROP_SHOWTHOUSANDSEP 1e Inserts a thousands separator.
12 HID_PROP_IMAGE_URL 6f The Graphics property specifies the graphic's path and file name that you want to have displayed on the button.
11 HID_PROP_DROPDOWN 42 Specifies whether the combo box should dropdown (Yes) or not (No).
15 HID_PROP_TARGET_FRAME 6b Specifies the target frame to display the document that is opened by the "Open document / web page" action.
15 HID_PROP_EFFECTIVEMAX 68 Defines a value for the control field which can not be exceeded by another value introduced by the user.
10 HID_PROP_HELPURL 83 Specifies a batch label in URL spelling which refers to a help document and which can be called with the help of the control field.
11 HID_PROP_TABINDEX 75 The Tab order property determines the order in which the controls are focused in the form when you press the Tab key.
10 HID_PROP_HSCROLL 37 Adds the scrollbar type that you specify to a text box.
e HID_PROP_ALIGN 4f Specifies the alignment option for text or graphics that are used on a control.
18 HID_PROP_BACKGROUNDCOLOR 2f Sets the background color of the control field.
10 HID_PROP_TIMEMAX 54 Determines a time which can not be exceeded by another value introduced by the user.
5 37931 5f Specifies to show or hide the filtering and sorting items in a selected Navigation Bar control.
17 HID_PROP_MULTISELECTION 36 Allows you to select more than one item in a list box.
21 EXTENSIONS_HID_PROP_SPININCREMENT 58 Determines intervals to add or subtract with each activation of the spin button control.
1a EXTENSIONS_HID_PROP_TOGGLE 122 Specifies if a Push Button behaves as a Toggle Button. If you set Toggle to "Yes", you can switch between the "selected" and "not selected" control states when you click the button or press the spacebar while the control has the focus. A button in the "selected" state appears "pressed in".
10 HID_PROP_DATEMAX 54 Determines a date which can not be exceeded by another value introduced by the user.
20 EXTENSIONS_HID_PROP_FOCUSONCLICK 5e If you set this option to "Yes", the Push Button receives the focus when you click the button.
5 37965 6c Specifies whether a text selection on a control remains selected when a the focus is no longer on a control.
12 HID_PROP_FORMATKEY 5a Specifies the format code for the control. Click the ... button to select the format code.
12 HID_PROP_ECHO_CHAR b5 If the text box is used as a password input, enter the ASCII-code of the display character. This character is displayed instead of the characters typed by the user for the password.
5 37966 65 Specifies whether Check boxes and Option buttons are displayed in a 3D look (default) or a flat look.
11 HID_PROP_EDITMASK 75 Defines the edit mask. By specifying a character code you can determine what the user can enter in the control field.
1f EXTENSIONS_HID_PROP_SYMBOLCOLOR 53 Specifies the color for symbols on controls, for example the arrows on a scrollbar.
18 HID_PROP_LIST_CELL_RANGE 5a Enter a cell range that contains the entries for a list box or combo box on a spreadsheet.
16 HID_PROP_CONTROLSOURCE 49 Specifies the field of the data source table to which the control refers.
14 HID_PROP_BOUNDCOLUMN a9 Use an index to specify the table field or table SQL query to link to the field that is provided under Data field. Valid values for this property are 1, 2, 3, and so on.
11 HID_PROP_REFVALUE d3 You can enter a reference value for the web form, which will be remitted to a server when sending the form. With database forms, the value entered is written in the database field, assigned to the control field.
17 HID_PROP_FILTERPROPOSAL f9 While designing your form, you can set the "Filter proposal" property for each text box in the Data tab of the corresponding Properties dialog. In subsequent searches in the filter mode, you can select from all information contained in these fields.
17 HID_PROP_LISTSOURCETYPE 3e Determines the data to fill the lists in list and combo boxes.
25 EXTENSIONS_HID_PROP_UNCHECKEDREFVALUE 112 Check boxes and radio buttons in spreadsheets can be bound to cells in the current document. If the control is enabled, the value you enter in Reference value (on) is copied to the cell. If the control is disabled, the value from Reference value (off) is copied to the cell.
16 HID_PROP_EMPTY_IS_NULL c9 Defines how an empty string input should be handled. If set to Yes, an input string of length zero will be treated as a value NULL. If set to No, any input will be treated as-is without any conversion.
13 HID_PROP_BOUND_CELL 85 Specifies the reference to a linked cell on a spreadsheet. The live state or contents of the control are linked to the cell contents.
13 HID_PROP_LISTSOURCE b3 With database forms, specifies the data source for the list content of the form-element. This field can be used to define a value list for documents without a database connection.
1b HID_PROP_CELL_EXCHANGE_TYPE 4a Select the mode of linking a list box with a linked cell on a spreadsheet.
13 HID_EVT_MOUSEEXITED 50 The Mouse outside event takes place when the mouse is outside the control field.
15 HID_EVT_MOUSERELEASED 71 The Mouse button released event occurs if the mouse button is released while the mouse pointer is on the control.
14 HID_EVT_MOUSEDRAGGED 65 The Mouse moved while key pressed event takes place when the mouse is dragged while a key is pressed.
13 HID_EVT_TEXTCHANGED 54 The Text modified event takes place if you enter or modify a text in an input field.
10 HID_EVT_KEYTYPED 5b The Key pressed event occurs when the user presses any key while the control has the focus.
13 HID_EVT_FOCUSGAINED 51 The When receiving focus event takes place if a control field receives the focus.
12 HID_EVT_MOUSEMOVED 41 The Mouse moved event occurs if the mouse moves over the control.
17 HID_EVT_ACTIONPERFORMED 3a The Execute action event occurs when an action is started.
14 HID_EVT_MOUSEENTERED 4c The Mouse inside event takes place if the mouse is inside the control field.
14 HID_EVT_MOUSEPRESSED 6f The Mouse button pressed event occurs if the mouse button is pressed while the mouse pointer is on the control.
1e HID_EVT_APPROVEACTIONPERFORMED 4d This event takes place before an action is triggered by clicking the control.
f HID_EVT_CHANGED 82 The Changed event takes place when the control loses the focus and the content of the control has changed since it lost the focus.
18 HID_EVT_ITEMSTATECHANGED 59 The Item status changed event takes place if the status of the control field has changed.
11 HID_EVT_FOCUSLOST 4c The When losing focus event takes place if a control field looses the focus.
d HID_EVT_KEYUP 5d The Key released event occurs when the user releases any key while the control has the focus.
15 .uno%3AFormProperties 61 In this dialog you can specify, among others,  the data source and the events for the whole form.
18 HID_PROP_SUBMIT_ENCODING 32 Specifies the type for encoding the data transfer.
16 HID_PROP_SUBMIT_METHOD 40 Specifies the method to transfer the completed form information.
12 HID_EVT_POSITIONED 60 The After record change event occurs directly after the current record pointer has been changed.
11 HID_EVT_ROWCHANGE 58 The After record action event occurs directly after the current record has been changed.
18 HID_EVT_APPROVEROWCHANGE 4b The Before record action event occurs before the current record is changed.
13 HID_EVT_POSITIONING 53 The Before record change event occurs before the current record pointer is changed.
11 HID_EVT_SUBMITTED 40 The Before submitting event occurs before the form data is sent.
10 HID_EVT_RESETTED 3d The After resetting event occurs after a form has been reset.
e HID_EVT_LOADED 46 The When loading event occurs directly after the form has been loaded.
13 HID_EVT_AFTERUPDATE 72 The After update event occurs after the control content changed by the user has been written into the data source.
18 HID_EVT_APPROVEPARAMETER 63 The Fill parameters event occurs when the form to be loaded has parameters that must be filled out.
11 HID_EVT_RELOADING 3e The Before reloading event occurs before the form is reloaded.
10 HID_EVT_RELOADED 4a The When reloading event occurs directly after the form has been reloaded.
10 HID_EVT_UNLOADED 73 The When unloading event occurs directly after the form has been unloaded; that is, separated from its data source.
17 HID_EVT_APPROVERESETTED 37 The Prior to reset event occurs before a form is reset.
11 HID_EVT_UNLOADING 67 The Before unloading event occurs before the form is unloaded; that is, separated from its data source.
15 HID_EVT_ERROROCCURRED 58 The Error occurred event is activated if an error occurs when accessing the data source.
15 HID_EVT_CONFIRMDELETE 51 The Confirm deletion event occurs as soon as data has been deleted from the form.
14 HID_PROP_SLAVEFIELDS 6b If you create a subform, enter the variable where possible values from the parent form field can be stored.
14 HID_PROP_ALLOW_EDITS 27 Determines if the data can be modified.
18 HID_PROP_ALLOW_DELETIONS 26 Determines if the data can be deleted.
13 HID_PROP_DATASOURCE 37 Defines the data source to which the form should refer.
15 HID_PROP_CURSORSOURCE fd Determines the content to be used for the form. The content can be an existing table or a query (previously created in the database), or it can be defined by an SQL-statement. Before you enter a content you have to define the exact type in Content type.
15 HID_PROP_MASTERFIELDS 80 If you create a subform, enter the data field of the parent form responsible for the synchronization between parent and subform.
18 HID_PROP_FILTER_CRITERIA 8c Enter the required conditions for filtering the data in the form. The filter specifications follow SQL rules without using the WHERE clause.
1a HID_PROP_ESCAPE_PROCESSING 46 Specifies whether the SQL statement is to be analyzed by %PRODUCTNAME.
12 HID_PROP_DATAENTRY 70 Determines if the form only allows the addition of new data (Yes) or if it allows other properties as well (No).
e HID_PROP_CYCLE 3f Determines how the navigation should be done using the tab key.
19 HID_PROP_CURSORSOURCETYPE 8a Defines whether the data source is to be an existing database table or query, or if the form is to be generated based on an SQL statement.
16 HID_PROP_SORT_CRITERIA 9c Specifies the conditions to sort the data in the form. The specification of the sorting conditions follows SQL rules without the use of the ORDER BY clause.
13 HID_PROP_NAVIGATION 4d Specifies whether the navigation functions in the lower form bar can be used.
18 HID_PROP_ALLOW_ADDITIONS 20 Determines if data can be added.
10 .uno%3ATabDialog 79 In the Tab Order dialog you can modify the order in which control fields get the focus when the user presses the tab key.
2f modules%2Fspropctrlr%2Fui%2Ftaborder%2FCTRLtree 76 Lists all controls in the form. These controls can be selected with the tab key in the given order from top to bottom.
2a modules%2Fspropctrlr%2Fui%2Ftaborder%2FupB 5c Click the Move Up button to shift the selected control one position higher in the tab order.
2c modules%2Fspropctrlr%2Fui%2Ftaborder%2FautoB 6f Click the Automatic Sort button to automatically sort the controls according to their position in the document.
2c modules%2Fspropctrlr%2Fui%2Ftaborder%2FdownB 5d Click the Move Down button to shift the selected control one position lower in the tab order.
d HID_FIELD_SEL 88 The field selection window lists all database fields of the table or query that was specified as the data source in the Form Properties.
f .uno%3AAddField 52 Opens a window where you can select a database field to add to the form or report.
1e .uno%3ASwitchControlDesignMode b1 Toggles the Design mode on or off. This function is used to switch quickly between Design and User mode. Activate to edit the form controls, deactivate to use the form controls.
14 SID_FM_RENAME_OBJECT 1c Renames the selected object.
1a .uno%3AShowPropertyBrowser 34 Starts the Properties dialog for the selected entry.
11 SID_FM_NEW_HIDDEN a6 Creates a hidden control in the selected form that is not displayed on the screen. A hidden control serves to include data that is transmitted together with the form.
12 HID_FORM_NAVIGATOR 68 The Form Navigator contains a list of all created (logical) forms with the corresponding control fields.
a SID_FM_NEW 6f Adds new elements to the form. The Add function can only be called if a form is selected in the Form Navigator.
d SID_FM_DELETE 1b Deletes the selected entry.
15 .uno%3AShowFmExplorer 84 Opens the Form Navigator. The Form Navigator displays all forms and subforms of the current document with their respective controls.
f SID_FM_NEW_FORM 23 Creates a new form in the document.
34 modules%2Fsabpilot%2Fui%2Ftableselectionpage%2Ftable 1c Specifies the desired table.
39 modules%2Fsabpilot%2Fui%2Ftableselectionpage%2Fdatasource 3a Specifies the data source that contains the desired table.
38 modules%2Fsabpilot%2Fui%2Fcontentfieldpage%2Fselectfield 3f Displays the data fields that are accepted into the form field.
32 modules%2Fsabpilot%2Fui%2Fcontenttablepage%2Ftable 76 In the Table field, select the table containing the data field whose content should be displayed in the control field.
3e DBP_EDIT_RID_PAGE_LCW_CONTENTSELECTION_FIELD_ET_DISPLAYEDFIELD 4a Specifies the field whose data are to be shown in the combo or list boxes.
3e DBP_LISTBOX_RID_PAGE_LCW_CONTENTSELECTION_FIELD_LB_SELECTFIELD 3d Displays all table fields chosen on the previous Wizard page.
33 modules%2Fsabpilot%2Fui%2Ffieldlinkpage%2Flisttable 5b Specifies the linked table data field, which is related to the specified value table field.
34 modules%2Fsabpilot%2Fui%2Ffieldlinkpage%2Fvaluefield 5d Specifies the current form data field which should be related to a field in the linked table.
43 modules%2Fsabpilot%2Fui%2Foptionsdbfieldpage%2FstoreInFieldCombobox 4b Specifies the data field where the combination field value should be saved.
3c modules%2Fsabpilot%2Fui%2Foptionsdbfieldpage%2FnoRadiobutton 7a Specifies that the value of this combination field will not be written in the database and will only be saved in the form.
3d modules%2Fsabpilot%2Fui%2Foptionsdbfieldpage%2FyesRadiobutton 6d Specifies whether the user's entered or selected combination field value should be saved in a database field.
13 .uno%3AOpenReadOnly 3a Opens forms in Design Mode so that the form can be edited.
11 .uno%3AUseWizards 51 Specifies whether to start the wizard automatically when inserting a new control.
15 .uno%3ADesignerDialog 76 Specifies whether to show or hide the Styles and Formatting window, which is where you can assign and organize Styles.
11 .uno%3AStyleApply 57 Assigns a style to the current paragraph, selected paragraphs, or to a selected object.
13 .uno%3ACharFontName 4d Allows you to select a font name from the list or enter a font name directly.
11 .uno%3AFontHeight 5d Allows you to choose between different font sizes from the list, or to enter a size manually.
1e .uno%3ATextdirectionLeftToRigh 2f Specifies the horizontal direction of the text.
1e .uno%3ATextdirectionTopToBotto 2d Specifies the vertical direction of the text.
16 .uno%3ADecrementIndent 92 Click the Decrease Indent icon to reduce the left indent of the current paragraph or cell content and set it to the previous default tab position.
16 .uno%3AIncrementIndent 90 Click the Increase Indent icon to increase the left indent of the current paragraph or cell content and set it to the next default tab position.
10 .uno%3ABackColor 14d Applies the current highlight color to the background of a text selection. If no text is selected, click the Highlighting icon, select the text that you want to highlight, and then click the Highlighting icon again. To change the highlight color, click the arrow next to the Highlighting icon, and then click the color that you want.
16 .uno%3ABackgroundColor ab Click to open a toolbar where you can click a background color for a paragraph. The color is applied to the background of the current paragraph or the selected paragraphs.
18 .uno%3AParaspaceIncrease 5f Click the Increase Spacing icon to increase the paragraph spacing above the selected paragraph.
18 .uno%3AParaspaceDecrease 5f Click the Decrease Spacing icon to decrease the paragraph spacing above the selected paragraph.
15 .uno%3ASetBorderStyle 71 Click the Borders icon to open the Borders toolbar, where you can modify the border of a sheet area or an object.
10 .uno%3ALineStyle 5b Click this icon to open the Line Style toolbar, where you can modify the border line style.
15 .uno%3AFrameLineColor 86 Click the Line Color (of the border) icon to open the Border Color toolbar, which enables you to change the border color of an object.
17 .uno%3AToggleAnchorType 2f Allows you to switch between anchoring options.
14 .uno%3AOptimizeTable 57 Opens a toolbar that contains functions for optimizing the rows and columns in a table.
13 .uno%3ALineEndStyle 69 Opens the Arrowheads toolbar. Use the symbols shown to define the style for the end of the selected line.
1d .uno%3AToggleObjectRotateMode 1c Rotates the selected object.
12 .uno%3AObjectAlign 2b Modifies the alignment of selected objects.
15 .uno%3ADecrementLevel 50 Moves the selected paragraph down one level in a numbering or bullets hierarchy.
15 .uno%3AIncrementLevel 50 Moves the selected paragraph up one level in the numbering or bullets hierarchy.
d .uno%3AMoveUp 39 Positions the selected paragraph before the one above it.
f .uno%3AMoveDown 38 Positions the selected paragraph after the one below it.
14 .uno%3ADefaultBullet 5b Assigns bullet points to the selected paragraphs, or removes them from bulleted paragraphs.
e .uno%3AOpenUrl 9f Loads a document specified by an entered URL. You can type a new URL, edit an URL, or select one from the list. Displays the full path of the current document.
d .uno%3AReload 3a Replaces the current document with the last saved version.
1c HID_HELP_TEXT_SELECTION_MODE d6 You can enable a selection cursor in a read-only text document or in the Help. Choose Edit - Select Text or open the context menu of a read-only document and choose Select Text. The selection cursor does not blink.
e .uno%3AEditDoc 3b Enables you to edit a read-only document or database table.
11 .uno%3ADSBEditDoc 3d Turns the edit mode for the current database table on or off.
b .uno%3AStop 5e Click to interrupt the current loading process, Ctrl-click to interrupt all loading processes.
18 .uno%3AExportDirectToPDF 4a Exports the current document directly as PDF. No settings dialog is shown.
15 .uno%3AStatusGetTitle 42 Displays information about the active %PRODUCTNAME Basic document.
18 .uno%3AStatusGetPosition 7d Displays the current cursor position in the %PRODUCTNAME Basic document. The row number is specified, then the column number.
18 HID_ICCDIALOG_CANCEL_BTN 21 Closes the dialog without saving.
14 HID_ICCDIALOG_OK_BTN 22 Applies the data to your document.
17 HID_ICCDIALOG_RESET_BTN 39 Resets the entries in the dialog to their original state.
16 .uno%3ARemoveHyperlink 2a Removes the hyperlink, leaving plain text.
14 .uno%3AEditHyperlink 1b Opens the Hyperlink dialog.
18 HID_ICCDIALOG_CHOICECTRL 2c Select the type of hyperlink to be inserted.
1c .uno%3AOpenHyperlinkOnCursor 30 Opens the hyperlink in your default web browser.
1c .uno%3ACopyHyperlinkLocation 20 Copies the URL to the clipboard.
35 cui%3AEdit%3ARID_SVXPAGE_HYPERLINK_INTERNET%3AED_TEXT 1f Enter a name for the hyperlink.
35 cui%3AEdit%3ARID_SVXPAGE_HYPERLINK_DOCUMENT%3AED_TEXT 1f Enter a name for the hyperlink.
42 SVX%3AIMAGEBUTTON%3ARID_SVXPAGE_HYPERLINK_NEWDOCUMENT%3ABTN_SCRIPT 87 Opens the Assign Macro dialog, in which you can give events such as "mouse over object" or "trigger hyperlink" their own program codes.
3a cui%3AComboBox%3ARID_SVXPAGE_HYPERLINK_INTERNET%3ACB_FRAME c3 Enter the name of the frame that you want the linked file to open in, or select a predefined frame from the list. If you leave this box blank, the linked file opens in the current browser window.
3a cui%3AComboBox%3ARID_SVXPAGE_HYPERLINK_DOCUMENT%3ACB_FRAME c3 Enter the name of the frame that you want the linked file to open in, or select a predefined frame from the list. If you leave this box blank, the linked file opens in the current browser window.
3d cui%3AComboBox%3ARID_SVXPAGE_HYPERLINK_NEWDOCUMENT%3ACB_FRAME c3 Enter the name of the frame that you want the linked file to open in, or select a predefined frame from the list. If you leave this box blank, the linked file opens in the current browser window.
36 cui%3AComboBox%3ARID_SVXPAGE_HYPERLINK_MAIL%3ACB_FRAME c3 Enter the name of the frame that you want the linked file to open in, or select a predefined frame from the list. If you leave this box blank, the linked file opens in the current browser window.
3b SVX%3ALISTBOX%3ARID_SVXPAGE_HYPERLINK_NEWDOCUMENT%3ALB_FORM 43 Specifies whether the hyperlink is inserted as text or as a button.
3f SVX%3ACHECKBOX%3ARID_SVXPAGE_HYPERLINK_INTERNET%3ACBX_ANONYMOUS 3d Allows you to log in to the FTP address as an anonymous user.
1a CUI_HID_HYPERDLG_INET_PATH a3 Enter a URL for the file that you want to open when you click the hyperlink. If you do not specify a target frame, the file opens in the current document or frame.
43 SVX%3ARADIOBUTTON%3ARID_SVXPAGE_HYPERLINK_INTERNET%3ARB_LINKTYP_FTP 19 Creates an FTP hyperlink.
2c cui%2Fui%2Fhyperlinkmarkdialog%2FTreeListBox 48 Specifies the position in the target document where you wish to jump to.
38 cui%3AEdit%3ARID_SVXPAGE_HYPERLINK_NEWDOCUMENT%3AED_TEXT 1f Enter a name for the hyperlink.
31 cui%3AEdit%3ARID_SVXPAGE_HYPERLINK_MAIL%3AED_TEXT 1f Enter a name for the hyperlink.
26 cui%2Fui%2Fhyperlinkmarkdialog%2Fapply 3f Inserts the target in the Target field of the Hyperlink dialog.
3f SVX%3AIMAGEBUTTON%3ARID_SVXPAGE_HYPERLINK_INTERNET%3ABTN_BROWSE 3d Opens a web browser, into which you can load the desired URL.
26 cui%2Fui%2Fhyperlinkmarkdialog%2Fclose 64 Once the hyperlink has been completely entered, click on Close to set the link and leave the dialog.
3e SVX%3AEDIT%3ARID_SVXPAGE_HYPERLINK_NEWDOCUMENT%3AED_INDICATION 3f Specifies the visible text or button caption for the hyperlink.
36 SVX%3AEDIT%3ARID_SVXPAGE_HYPERLINK_INTERNET%3AED_LOGIN 41 Specifies your login name, if you are working with FTP addresses.
48 SVX%3ARADIOBUTTON%3ARID_SVXPAGE_HYPERLINK_INTERNET%3ARB_LINKTYP_INTERNET 1a Creates an http hyperlink.
37 SVX%3AEDIT%3ARID_SVXPAGE_HYPERLINK_INTERNET%3AED_PASSWD 3f Specifies your password, if you are working with FTP addresses.
16 HID_HYPERDLG_MAIL_PATH 67 Specifies the full URL of the addressee, in the form mailto:name@provider.com or news:group.server.com.
3a SVX_RADIOBUTTON_RID_SVXPAGE_HYPERLINK_MAIL_RB_LINKTYP_MAIL 36 Assigns the specified e-mail address to the hyperlink.
3a SVX_RADIOBUTTON_RID_SVXPAGE_HYPERLINK_MAIL_RB_LINKTYP_NEWS 28 Assigns a news address to the hyperlink.
2e SVX_EDIT_RID_SVXPAGE_HYPERLINK_MAIL_ED_SUBJECT 57 Specifies the subject that is inserted in the subject line of the new message document.
39 SVX_IMAGEBUTTON_RID_SVXPAGE_HYPERLINK_MAIL_BTN_ADRESSBOOK 27 Hides or shows the data source browser.
3f SVX%3AIMAGEBUTTON%3ARID_SVXPAGE_HYPERLINK_DOCUMENT%3ABTN_BROWSE 24 Opens the Target in Document dialog.
1a CUI_HID_HYPERLINK_DOCUMENT a3 Enter a URL for the file that you want to open when you click the hyperlink. If you do not specify a target frame, the file opens in the current document or frame.
19 CUI_HID_HYPERDLG_DOC_PATH a3 Enter a URL for the file that you want to open when you click the hyperlink. If you do not specify a target frame, the file opens in the current document or frame.
41 SVX%3AIMAGEBUTTON%3ARID_SVXPAGE_HYPERLINK_DOCUMENT%3ABTN_FILEOPEN 33 Opens the Open dialog, where you can select a file.
3b SVX%3AEDIT%3ARID_SVXPAGE_HYPERLINK_DOCUMENT%3AED_TARGET_DOC 4c Specifies a target for the hyperlink into the document specified under Path.
45 SVX%3ALISTBOX%3ARID_SVXPAGE_HYPERLINK_NEWDOCUMENT%3ALB_DOCUMENT_TYPES 2d Specifies the file type for the new document.
42 SVX%3ARADIOBUTTON%3ARID_SVXPAGE_HYPERLINK_NEWDOCUMENT%3ARB_EDITNOW 4e Specifies that the new document is created and immediately opened for editing.
44 SVX%3ARADIOBUTTON%3ARID_SVXPAGE_HYPERLINK_NEWDOCUMENT%3ARB_EDITLATER 48 Specifies that the document is created but it is not immediately opened.
42 SVX%3AIMAGEBUTTON%3ARID_SVXPAGE_HYPERLINK_NEWDOCUMENT%3ABTN_CREATE 3a Opens the Select Path dialog, where you can select a path.
3f cui%3AEdit%3ARID_SVXPAGE_HYPERLINK_NEWDOCUMENT%3AED_PATH_NEWDOC 4c Enter a URL for the file that you want to open when you click the hyperlink.
13 .uno%3APreviousPage 30 Moves back to the previous page in the document.
f .uno%3ANextPage 2f Moves forward to the next page in the document.
10 .uno%3AFirstPage 28 Moves to the first page of the document.
f .uno%3ALastPage 27 Moves to the last page of the document.
f .uno%3ACloseWin 1a Closes the current window.
21 DBACCESS_HID_BROWSER_ADMINISTRATE b3 Opens a dialog to add/edit/remove a database file from the list of registered databases. The same dialog opens by choosing %PRODUCTNAME Base - Databases in the Options dialog box.
18 .uno%3ADSBrowserExplorer 36 Turns on and off the view of the data source explorer.
1e DBACCESS_HID_BROWSER_CLOSECONN 68 Closes the connection to the data source. See %PRODUCTNAME Base - Connections in the Options dialog box.
21 DBACCESS_HID_BROWSER_RENAME_ENTRY c5 To rename an entry, call this command and enter the new name. You can also do this by selecting the entry and pressing F2. The database must support renaming, otherwise this command is not enabled.
22 DBACCESS_HID_BROWSER_EDIT_DATABASE 2d Opens the selected database file for editing.
f .uno%3ASortDown 39 Sorts the data of the selected field in descending order.
11 .uno%3AAutoFilter 4f Filters the records, based on the content of the currently selected data field.
17 .uno%3ARemoveFilterSort 51 Cancels the filter settings and displays all of the records in the current table.
1f HID_BROWSER_REFRESH_REBUILDVIEW 6b Rebuilds the view of the database table. Use this command when you have changed the structure of the table.
e .uno%3ARefresh 1d Refreshes the displayed data.
13 .uno%3ASbaBrwInsert 59 Inserts all fields of the marked record into the current document at the cursor position.
3b modules%2Fswriter%2Fui%2Finsertdbcolumnsdialog%2Fautoformat 79 Opens the AutoFormat dialog, in which you can select format styles that are immediately applied when inserting the table.
3c modules%2Fswriter%2Fui%2Finsertdbcolumnsdialog%2Ftableformat 7e Opens the Table Format dialog, which enables you to define the table properties such as borders, background, and column width.
3b modules%2Fswriter%2Fui%2Finsertdbcolumnsdialog%2Fcolumnname 5a Uses the field names of the database table as headings for each of the text table columns.
3a modules%2Fswriter%2Fui%2Finsertdbcolumnsdialog%2Ftablecols 3c Lists all database columns to be inserted into the document.
3c modules%2Fswriter%2Fui%2Finsertdbcolumnsdialog%2Ftabledbcols 42 Specifies the database columns to be inserted into the text table.
39 modules%2Fswriter%2Fui%2Finsertdbcolumnsdialog%2Fallright 43 Moves all listed database fields into the Table column(s) list box.
3a modules%2Fswriter%2Fui%2Finsertdbcolumnsdialog%2Fnumformat 63 Specifies a format from the list, if the format information of certain data fields is not accepted.
38 modules%2Fswriter%2Fui%2Finsertdbcolumnsdialog%2Fastable 50 Inserts data selected from the data source browser into the document as a table.
39 modules%2Fswriter%2Fui%2Finsertdbcolumnsdialog%2Foneright 44 Moves the selected database field into the Table column(s) list box.
38 modules%2Fswriter%2Fui%2Finsertdbcolumnsdialog%2Foneleft 45 Removes the selected database field from the Table column(s) list box
3d modules%2Fswriter%2Fui%2Finsertdbcolumnsdialog%2Ftableheading 4d Specifies whether to insert a heading line for the columns in the text table.
38 modules%2Fswriter%2Fui%2Finsertdbcolumnsdialog%2Fallleft 3e Removes all database fields from the Table column(s) list box.
38 modules%2Fswriter%2Fui%2Finsertdbcolumnsdialog%2Frowonly 32 Inserts an empty heading line into the text table.
3d modules%2Fswriter%2Fui%2Finsertdbcolumnsdialog%2Ffromdatabase 1d Accepts the database formats.
37 modules%2Fswriter%2Fui%2Finsertdbcolumnsdialog%2Fastext 4d Inserts data selected from the data source browser into the document as text.
28 .uno%3ADataSourceBrowser%2FInsertContent 4b Updates the contents of the existing database fields by the marked records.
11 .uno%3AFilterCrit 28 Allows you to set the filtering options.
2a dbaccess%2Fui%2Fqueryfilterdialog%2Ffield3 4d Specifies the field names from the current table to set them in the argument.
27 dbaccess%2Fui%2Fqueryfilterdialog%2Fop3 53 For the following arguments, you can choose between the logical operators AND / OR.
2a dbaccess%2Fui%2Fqueryfilterdialog%2Fvalue3 26 Specifies a value to filter the field.
1f .uno%3ADataFilterStandardFilter 3b Specifies the logical conditions to filter your table data.
29 dbaccess%2Fui%2Fqueryfilterdialog%2Fcond3 6f Specifies the comparative operators through which the entries in the Field name and Value fields can be linked.
10 .uno%3AOrderCrit 3a Specifies the sort order (either ascending or descending).
29 cui%2Fui%2Ffmsearchdialog%2FpbSearchAgain 1d Starts or cancels the search.
26 cui%2Fui%2Ffmsearchdialog%2FcbWildCard 27 Allows a search with a * or ? wildcard.
27 cui%2Fui%2Ffmsearchdialog%2FcbStartOver 77 Restarts the search. A forward search restarts with the first record. A backwards search restarts with the last record.
27 cui%2Fui%2Ffmsearchdialog%2FcbBackwards 63 Specifies that the search process will run in reverse direction, from the last to the first record.
2e cui%2Fui%2Ffmsearchdialog%2FrbSearchForNotNull 36 Specifies that fields will be found that contain data.
27 cui%2Fui%2Ffmsearchdialog%2FcbUseFormat 57 Specifies that all field formats are considered when searching in the current document.
22 cui%2Fui%2Ffmsearchdialog%2FcbCase 53 Specifies that upper and lower case are taken into consideration during the search.
2b cui%2Fui%2Ffmsearchdialog%2FrbSearchForNull 39 Specifies that fields will be found that contain no data.
21 cui%2Fui%2Ffmsearchdialog%2Fclose 5d Closes the dialog. The settings of the last search will be saved until you quit %PRODUCTNAME.
25 cui%2Fui%2Ffmsearchdialog%2FcbRegular 22 Searches with regular expressions.
2b cui%2Fui%2Ffmsearchdialog%2FrbSearchForText 3c Enter the search term in the box or select it from the list.
27 cui%2Fui%2Ffmsearchdialog%2FrbAllFields 1c Searches through all fields.
10 .uno%3ARecSearch 23 Searches database tables and forms.
29 cui%2Fui%2Ffmsearchdialog%2FrbSingleField 28 Searches through a specified data field.
22 cui%2Fui%2Ffmsearchdialog%2FlbForm 46 Specifies the logical form in which you want the search to take place.
26 cui%2Fui%2Ffmsearchdialog%2FlbPosition 45 Specifies the relationship of the search term and the field contents.
11 .uno%3AFormFilter 4d Prompts the database server to filter the visible data by specified criteria.
13 .uno%3AFormFiltered 3f Switches between the filtered and unfiltered view of the table.
15 .uno%3AViewFormAsGrid 39 Activates an additional table view when in the form view.
2d .uno%3ADataSourceBrowser%2FDocumentDataSource 57 Displays, in the data source browser, the table that is linked to the current document.
14 .uno%3ASbaExecuteSql 31 Runs the SQL query and displays the query result.
13 .uno%3ADBClearQuery 3f Clears the query and removes all tables from the design window.
28 dbaccess%2Fui%2Ftablesjoindialog%2Fclose 1d Closes the Add Tables dialog.
2c dbaccess%2Fui%2Ftablesjoindialog%2Ftablelist 1b Lists the available tables.
26 dbaccess%2Fui%2Ftablesjoindialog%2Fadd 25 Inserts the currently selected table.
29 dbaccess%2Fui%2Ftablesjoindialog%2Ftables 12 Shows only tables.
2a dbaccess%2Fui%2Ftablesjoindialog%2Fqueries 13 Shows only queries.
19 .uno%3ADBChangeDesignMode 36 Displays the design view or the SQL view of the query.
13 .uno%3ASbaNativeSql 8c In Native SQL mode you can enter SQL commands that are not interpreted by $[officename], but are instead passed directly to the data source.
16 .uno%3ADBViewFunctions 5c Displays the "Function" row in the lower part of the design view of the Query Design window.
17 .uno%3ADBViewTableNames 3f Displays the "Table" row in the lower part of the Query Design.
14 .uno%3ADBViewAliases 3f Displays the "Alias" row in the lower part of the Query Design.
17 .uno%3ADBDistinctValues 66 Expands the created select statement of the SQL Query in the current column by the parameter DISTINCT.
13 .uno%3ASelectObject 35 Allows you to select objects in the current document.
11 .uno%3ASourceView 8b Displays the source text of the current HTML document. This view is available when creating a new HTML document or opening an existing one.
11 SW_HID_SOURCEVIEW 8b Displays the source text of the current HTML document. This view is available when creating a new HTML document or opening an existing one.
13 .uno%3ALayoutStatus 65 Displays the current Page Style. Double-click to edit the style, right-click to select another style.
10 .uno%3AStateZoom 2f Specifies the current page display zoom factor.
11 .uno%3AInsertMode 5d Displays the current insert mode. You can toggle between INSRT = insert and OVER = overwrite.
1a .uno%3AStatusSelectionMode 36 Here you can switch between different selection modes.
10 SID_MODIFYSTATUS 9a If changes to the document have not yet been saved, a "*" is displayed in this field on the Status Bar. This also applies to new, not yet saved documents.
12 .uno%3ACurrentTime 1a Displays the current time.
12 .uno%3ACurrentDate 1a Displays the current date.
1f cui%2Fui%2Fmosaicdialog%2Fwidth 2a Defines the width of the individual tiles.
1a .uno%3AGraphicFilterMosaic 46 Joins small groups of pixels into rectangular areas of the same color.
1a .uno%3AGraphicFilterRelief 27 Displays a dialog for creating reliefs.
1f cui%2Fui%2Fmosaicdialog%2Fedges 2f Enhances, or sharpens, the edges of the object.
1a .uno%3AGraphicFilterPopart 26 Converts an image to a pop-art format.
1f cui%2Fui%2Fposterdialog%2Fvalue 43 Specifies the number of colors to which the image is to be reduced.
1a .uno%3AGraphicFilterPoster 38 Opens a dialog to determine the number of poster colors.
1a .uno%3AGraphicFilterSmooth 39 Softens or blurs the image by applying a low pass filter.
1f .uno%3AGraphicFilterRemoveNoise 2a Removes noise by applying a median filter.
20 cui%2Fui%2Fmosaicdialog%2Fheight 2b Defines the height of the individual tiles.
19 .uno%3AGraphicFilterSobel 7e Displays the image as a charcoal sketch. The contours of the image are drawn in black, and the original colors are suppressed.
1b .uno%3AGraphicFilterToolbox 73 This icon on the Image bar opens the Graphic Filter bar, where you can use various filters on the selected picture.
1c .uno%3AGraphicFilterSolarize c4 Opens a dialog for defining solarization. Solarization refers to an effect that looks like what can happen when there is too much light during photo development. The colors become partly inverted.
1a .uno%3AGraphicFilterInvert 86 Inverts the color values of a color image, or the brightness values of a grayscale image. Apply the filter again to revert the effect.
21 cui%2Fui%2Fsolarizedialog%2Fvalue 5b Specifies the degree of brightness, in percent, above which the pixels are to be solarized.
1e cui%2Fui%2Fagingdialog%2Fvalue 84 Defines the intensity of aging, in percent. At 0% you see the gray values of all pixels. At 100% only the red color channel remains.
22 cui%2Fui%2Fsolarizedialog%2Finvert 24 Specifies to also invert all pixels.
1b .uno%3AGraphicFilterSharpen 32 Sharpens the image by applying a high pass filter.
19 .uno%3AGraphicFilterSepia a0 All pixels are set to their gray values, and then the green and blue color channels are reduced by the amount you specify. The red color channel is not changed.
f .uno%3AGrafMode a2 Lists view attributes for the selected graphic object. The embedded or linked graphic object in the current file will not be changed, only the view of the object.
e .uno%3AGrafRed 55 Specifies the proportion of red RGB color components for the selected graphic object.
10 .uno%3AGrafGreen 57 Specifies the proportion of green RGB color components for the selected graphic object.
f .uno%3AGrafBlue 4f Specifies the proportion of blue RGB color components for the selected graphic.
14 .uno%3AGrafLuminance 39 Specifies the brightness for the selected graphic object.
13 .uno%3AGrafContrast 3e Specifies the contrast for viewing the selected graphic image.
10 .uno%3AGrafGamma 72 Specifies the gamma value for the view of the selected object, which affects the brightness of the midtone values.
17 .uno%3AGrafTransparence 31 Specifies the transparency in the graphic object.
b .uno%3ACrop 3b Drag any of the eight cropping handles to crop the picture.
13 .uno%3AGrafAttrCrop 76 Allows to crop the display of an inserted picture. Only the display gets cropped, the inserted picture is not changed.
25 .uno%3ABasicShapes.isosceles-triangle 5b Click an icon on the Basic Shapes toolbar, and then drag in the document to draw the shape.
1c .uno%3ABasicShapes.rectangle 5b Click an icon on the Basic Shapes toolbar, and then drag in the document to draw the shape.
21 .uno%3ABasicShapes.right-triangle 5b Click an icon on the Basic Shapes toolbar, and then drag in the document to draw the shape.
22 .uno%3ABasicShapes.round-rectangle 5b Click an icon on the Basic Shapes toolbar, and then drag in the document to draw the shape.
1d .uno%3ABasicShapes.circle-pie 5b Click an icon on the Basic Shapes toolbar, and then drag in the document to draw the shape.
1a .uno%3ABasicShapes.ellipse 5b Click an icon on the Basic Shapes toolbar, and then drag in the document to draw the shape.
12 .uno%3ABasicShapes 57 Opens the Basic Shapes toolbar which you can use to insert graphics into your document.
19 .uno%3ABasicShapes.circle 5b Click an icon on the Basic Shapes toolbar, and then drag in the document to draw the shape.
1a .uno%3ABasicShapes.quadrat 5b Click an icon on the Basic Shapes toolbar, and then drag in the document to draw the shape.
16 .uno%3ABasicShapes.can 5b Click an icon on the Basic Shapes toolbar, and then drag in the document to draw the shape.
20 .uno%3ABasicShapes.round-quadrat 5b Click an icon on the Basic Shapes toolbar, and then drag in the document to draw the shape.
1c .uno%3ABasicShapes.trapezoid 5b Click an icon on the Basic Shapes toolbar, and then drag in the document to draw the shape.
1b .uno%3ABasicShapes.pentagon 5b Click an icon on the Basic Shapes toolbar, and then drag in the document to draw the shape.
18 .uno%3ABasicShapes.cross 5b Click an icon on the Basic Shapes toolbar, and then drag in the document to draw the shape.
1a .uno%3ABasicShapes.diamond 5b Click an icon on the Basic Shapes toolbar, and then drag in the document to draw the shape.
20 .uno%3ABasicShapes.parallelogram 5b Click an icon on the Basic Shapes toolbar, and then drag in the document to draw the shape.
18 .uno%3ABasicShapes.paper 5b Click an icon on the Basic Shapes toolbar, and then drag in the document to draw the shape.
1a .uno%3ABasicShapes.hexagon 5b Click an icon on the Basic Shapes toolbar, and then drag in the document to draw the shape.
18 .uno%3ABasicShapes.frame 5b Click an icon on the Basic Shapes toolbar, and then drag in the document to draw the shape.
1a .uno%3ABasicShapes.octagon 5b Click an icon on the Basic Shapes toolbar, and then drag in the document to draw the shape.
17 .uno%3ABasicShapes.ring 5b Click an icon on the Basic Shapes toolbar, and then drag in the document to draw the shape.
17 .uno%3ABasicShapes.cube 5b Click an icon on the Basic Shapes toolbar, and then drag in the document to draw the shape.
1c .uno%3ABasicShapes.block-arc 5b Click an icon on the Basic Shapes toolbar, and then drag in the document to draw the shape.
22 .uno%3AArrowShapes.s-sharped-arrow 59 Click an icon from the Block Arrows toolbar, then drag in the document to draw the shape.
24 .uno%3AArrowShapes.split-round-arrow 59 Click an icon from the Block Arrows toolbar, then drag in the document to draw the shape.
25 .uno%3AArrowShapes.quad-arrow-callout 59 Click an icon from the Block Arrows toolbar, then drag in the document to draw the shape.
29 .uno%3AArrowShapes.up-right-arrow-callout 59 Click an icon from the Block Arrows toolbar, then drag in the document to draw the shape.
21 .uno%3AArrowShapes.up-right-arrow 59 Click an icon from the Block Arrows toolbar, then drag in the document to draw the shape.
25 .uno%3AArrowShapes.corner-right-arrow 59 Click an icon from the Block Arrows toolbar, then drag in the document to draw the shape.
20 .uno%3AArrowShapes.up-down-arrow 59 Click an icon from the Block Arrows toolbar, then drag in the document to draw the shape.
21 .uno%3AArrowShapes.circular-arrow 59 Click an icon from the Block Arrows toolbar, then drag in the document to draw the shape.
25 .uno%3AArrowShapes.down-arrow-callout 59 Click an icon from the Block Arrows toolbar, then drag in the document to draw the shape.
1d .uno%3AArrowShapes.quad-arrow 59 Click an icon from the Block Arrows toolbar, then drag in the document to draw the shape.
1e .uno%3AArrowShapes.right-arrow 59 Click an icon from the Block Arrows toolbar, then drag in the document to draw the shape.
26 .uno%3AArrowShapes.notched-right-arrow 59 Click an icon from the Block Arrows toolbar, then drag in the document to draw the shape.
2b .uno%3AArrowShapes.left-right-arrow-callout 59 Click an icon from the Block Arrows toolbar, then drag in the document to draw the shape.
1b .uno%3AArrowShapes.up-arrow 59 Click an icon from the Block Arrows toolbar, then drag in the document to draw the shape.
26 .uno%3AArrowShapes.up-right-down-arrow 59 Click an icon from the Block Arrows toolbar, then drag in the document to draw the shape.
29 .uno%3AArrowShapes.up-down--arrow-callout 59 Click an icon from the Block Arrows toolbar, then drag in the document to draw the shape.
1d .uno%3AArrowShapes.down-arrow 59 Click an icon from the Block Arrows toolbar, then drag in the document to draw the shape.
12 .uno%3AArrowShapes 55 Opens the Block Arrows toolbar from which you can insert graphics into your document.
23 .uno%3AArrowShapes.left-right-arrow 59 Click an icon from the Block Arrows toolbar, then drag in the document to draw the shape.
26 .uno%3AArrowShapes.striped-right-arrow 59 Click an icon from the Block Arrows toolbar, then drag in the document to draw the shape.
1a .uno%3AArrowShapes.chevron 59 Click an icon from the Block Arrows toolbar, then drag in the document to draw the shape.
1e .uno%3AArrowShapes.split-arrow 59 Click an icon from the Block Arrows toolbar, then drag in the document to draw the shape.
1d .uno%3AArrowShapes.left-arrow 59 Click an icon from the Block Arrows toolbar, then drag in the document to draw the shape.
21 .uno%3AArrowShapes.pentagon-right 59 Click an icon from the Block Arrows toolbar, then drag in the document to draw the shape.
23 .uno%3AArrowShapes.up-arrow-callout 59 Click an icon from the Block Arrows toolbar, then drag in the document to draw the shape.
26 .uno%3AArrowShapes.right-arrow-callout 59 Click an icon from the Block Arrows toolbar, then drag in the document to draw the shape.
25 .uno%3AArrowShapes.left-arrow-callout 59 Click an icon from the Block Arrows toolbar, then drag in the document to draw the shape.
23 .uno%3ACalloutShapes.line-callout-3 55 Click an icon from the Callouts toolbar, then drag in the document to draw the shape.
23 .uno%3ACalloutShapes.line-callout-2 55 Click an icon from the Callouts toolbar, then drag in the document to draw the shape.
23 .uno%3ACalloutShapes.line-callout-1 55 Click an icon from the Callouts toolbar, then drag in the document to draw the shape.
22 .uno%3ACalloutShapes.cloud-callout 55 Click an icon from the Callouts toolbar, then drag in the document to draw the shape.
14 .uno%3ACalloutShapes 51 Opens the Callouts toolbar from which you can insert graphics into your document.
28 .uno%3ACalloutShapes.rectangular-callout 55 Click an icon from the Callouts toolbar, then drag in the document to draw the shape.
2e .uno%3ACalloutShapes.round-rectangular-callout 55 Click an icon from the Callouts toolbar, then drag in the document to draw the shape.
22 .uno%3ACalloutShapes.round-callout 55 Click an icon from the Callouts toolbar, then drag in the document to draw the shape.
14 .uno%3AColorSettings 4b With the Color toolbar you can edit some properties of the selected object.
26 .uno%3AFlowChartShapes.flowchart-delay 56 Click an icon from the Flowchart toolbar, then drag in the document to draw the shape.
26 .uno%3AFlowChartShapes.flowchart-merge 56 Click an icon from the Flowchart toolbar, then drag in the document to draw the shape.
2a .uno%3AFlowChartShapes.flowchart-connector 56 Click an icon from the Flowchart toolbar, then drag in the document to draw the shape.
28 .uno%3AFlowChartShapes.flowchart-display 56 Click an icon from the Flowchart toolbar, then drag in the document to draw the shape.
31 .uno%3AFlowChartShapes.flowchart-internal-storage 56 Click an icon from the Flowchart toolbar, then drag in the document to draw the shape.
31 .uno%3AFlowChartShapes.flowchart-summing-junction 56 Click an icon from the Flowchart toolbar, then drag in the document to draw the shape.
28 .uno%3AFlowChartShapes.flowchart-extract 56 Click an icon from the Flowchart toolbar, then drag in the document to draw the shape.
36 .uno%3AFlowChartShapes.flowchart-direct-access-storage 56 Click an icon from the Flowchart toolbar, then drag in the document to draw the shape.
16 .uno%3AFlowChartShapes 52 Opens the Flowchart toolbar from which you can insert graphics into your document.
32 .uno%3AFlowChartShapes.flowchart-sequential-access 56 Click an icon from the Flowchart toolbar, then drag in the document to draw the shape.
33 .uno%3AFlowChartShapes.flowchart-predefined-process 56 Click an icon from the Flowchart toolbar, then drag in the document to draw the shape.
2c .uno%3AFlowChartShapes.flowchart-stored-data 56 Click an icon from the Flowchart toolbar, then drag in the document to draw the shape.
2e .uno%3AFlowChartShapes.flowchart-multidocument 56 Click an icon from the Flowchart toolbar, then drag in the document to draw the shape.
25 .uno%3AFlowChartShapes.flowchart-data 56 Click an icon from the Flowchart toolbar, then drag in the document to draw the shape.
28 .uno%3AFlowChartShapes.flowchart-process 56 Click an icon from the Flowchart toolbar, then drag in the document to draw the shape.
2b .uno%3AFlowChartShapes.flowchart-terminator 56 Click an icon from the Flowchart toolbar, then drag in the document to draw the shape.
32 .uno%3AFlowChartShapes.flowchart-alternate-process 56 Click an icon from the Flowchart toolbar, then drag in the document to draw the shape.
29 .uno%3AFlowChartShapes.flowchart-decision 56 Click an icon from the Flowchart toolbar, then drag in the document to draw the shape.
2c .uno%3AFlowChartShapes.flowchart-preparation 56 Click an icon from the Flowchart toolbar, then drag in the document to draw the shape.
31 .uno%3AFlowChartShapes.flowchart-manual-operation 56 Click an icon from the Flowchart toolbar, then drag in the document to draw the shape.
2e .uno%3AFlowChartShapes.flowchart-magnetic-disk 56 Click an icon from the Flowchart toolbar, then drag in the document to draw the shape.
2d .uno%3AFlowChartShapes.flowchart-manual-input 56 Click an icon from the Flowchart toolbar, then drag in the document to draw the shape.
33 .uno%3AFlowChartShapes.flowchart-off-page-connector 56 Click an icon from the Flowchart toolbar, then drag in the document to draw the shape.
25 .uno%3AFlowChartShapes.flowchart-card 56 Click an icon from the Flowchart toolbar, then drag in the document to draw the shape.
29 .uno%3AFlowChartShapes.flowchart-document 56 Click an icon from the Flowchart toolbar, then drag in the document to draw the shape.
23 .uno%3AFlowChartShapes.flowchart-or 56 Click an icon from the Flowchart toolbar, then drag in the document to draw the shape.
2d .uno%3AFlowChartShapes.flowchart-punched-tape 56 Click an icon from the Flowchart toolbar, then drag in the document to draw the shape.
28 .uno%3AFlowChartShapes.flowchart-collate 56 Click an icon from the Flowchart toolbar, then drag in the document to draw the shape.
25 .uno%3AFlowChartShapes.flowchart-sort 56 Click an icon from the Flowchart toolbar, then drag in the document to draw the shape.
1d .uno%3AFontworkGalleryFloater 64 The icon opens the Fontwork Gallery from which you can insert graphical text art into your document.
e .uno%3ADBLimit 4b Expands the created select statement of the SQL Query by the LIMIT X clause
17 .uno%3AFormatPaintbrush 93 First select some text or an object, then click this icon. Then click on or drag across other text or click an object to apply the same formatting.
33 dbaccess%2Fui%2Fquerypropertiesdialog%2Fnondistinct 21 Not use distinct values in query.
30 dbaccess%2Fui%2Fquerypropertiesdialog%2Fdistinct 1d Use distinct values in query.
3d dbaccess%2Fui%2Fquerypropertiesdialog%2FQueryPropertiesDialog 1d Use distinct values in query.
17 .uno%3AStarShapes.star4 60 Click an icon on the Stars and Banners toolbar, and then drag in the document to draw the shape.
17 .uno%3AStarShapes.star5 60 Click an icon on the Stars and Banners toolbar, and then drag in the document to draw the shape.
16 .uno%3AStarShapes.bang 60 Click an icon on the Stars and Banners toolbar, and then drag in the document to draw the shape.
17 .uno%3AStarShapes.star6 60 Click an icon on the Stars and Banners toolbar, and then drag in the document to draw the shape.
17 .uno%3AStarShapes.star8 60 Click an icon on the Stars and Banners toolbar, and then drag in the document to draw the shape.
23 .uno%3AStarShapes.horizontal-scroll 60 Click an icon on the Stars and Banners toolbar, and then drag in the document to draw the shape.
11 .uno%3AStarShapes 5a Opens the Stars and Banners toolbar from which you can insert graphics into your document.
18 .uno%3AStarShapes.star12 60 Click an icon on the Stars and Banners toolbar, and then drag in the document to draw the shape.
18 .uno%3AStarShapes.star24 60 Click an icon on the Stars and Banners toolbar, and then drag in the document to draw the shape.
1f .uno%3AStarShapes.concave-star6 60 Click an icon on the Stars and Banners toolbar, and then drag in the document to draw the shape.
1b .uno%3AStarShapes.doorplate 60 Click an icon on the Stars and Banners toolbar, and then drag in the document to draw the shape.
18 .uno%3AStarShapes.signet 60 Click an icon on the Stars and Banners toolbar, and then drag in the document to draw the shape.
21 .uno%3AStarShapes.vertical-scroll 60 Click an icon on the Stars and Banners toolbar, and then drag in the document to draw the shape.
21 .uno%3ASymbolShapes.diamond-bevel 5c Click an icon on the Symbol Shapes toolbar, and then drag in the document to draw the shape.
1f .uno%3ASymbolShapes.right-brace 5c Click an icon on the Symbol Shapes toolbar, and then drag in the document to draw the shape.
1e .uno%3ASymbolShapes.left-brace 5c Click an icon on the Symbol Shapes toolbar, and then drag in the document to draw the shape.
1e .uno%3ASymbolShapes.brace-pair 5c Click an icon on the Symbol Shapes toolbar, and then drag in the document to draw the shape.
21 .uno%3ASymbolShapes.right-bracket 5c Click an icon on the Symbol Shapes toolbar, and then drag in the document to draw the shape.
20 .uno%3ASymbolShapes.bracket-pair 5c Click an icon on the Symbol Shapes toolbar, and then drag in the document to draw the shape.
18 .uno%3ASymbolShapes.moon 5c Click an icon on the Symbol Shapes toolbar, and then drag in the document to draw the shape.
17 .uno%3ASymbolShapes.sun 5c Click an icon on the Symbol Shapes toolbar, and then drag in the document to draw the shape.
13 .uno%3ASymbolShapes 56 Opens the Symbol Shapes toolbar from which you can insert graphics into your document.
19 .uno%3ASymbolShapes.heart 5c Click an icon on the Symbol Shapes toolbar, and then drag in the document to draw the shape.
20 .uno%3ASymbolShapes.left-bracket 5c Click an icon on the Symbol Shapes toolbar, and then drag in the document to draw the shape.
1a .uno%3ASymbolShapes.smiley 5c Click an icon on the Symbol Shapes toolbar, and then drag in the document to draw the shape.
1a .uno%3ASymbolShapes.flower 5c Click an icon on the Symbol Shapes toolbar, and then drag in the document to draw the shape.
1e .uno%3ASymbolShapes.quad-bevel 5c Click an icon on the Symbol Shapes toolbar, and then drag in the document to draw the shape.
1d .uno%3ASymbolShapes.lightning 5c Click an icon on the Symbol Shapes toolbar, and then drag in the document to draw the shape.
19 .uno%3ASymbolShapes.cloud 5c Click an icon on the Symbol Shapes toolbar, and then drag in the document to draw the shape.
1d .uno%3ASymbolShapes.forbidden 5c Click an icon on the Symbol Shapes toolbar, and then drag in the document to draw the shape.
21 .uno%3ASymbolShapes.octagon-bevel 5c Click an icon on the Symbol Shapes toolbar, and then drag in the document to draw the shape.
1a .uno%3ASymbolShapes.puzzle 5c Click an icon on the Symbol Shapes toolbar, and then drag in the document to draw the shape.
20 sfx%2Fui%2Fsearchdialog%2Fsearch 2d Finds the next occurrence of the search term.
23 sfx%2Fui%2Fsearchdialog%2Fbackwards 3b Searches backwards from the current position of the cursor.
1e sfx%2Fui%2Fsearchdialog%2Fwrap 4e Searches the entire Help page, starting at the current position of the cursor.
23 sfx%2Fui%2Fsearchdialog%2Fmatchcase 38 Distinguishes between uppercase text and lowercase text.
23 sfx%2Fui%2Fhelpcontrol%2Ftabcontrol 62 The navigation pane of the Help window contains the tab pages Contents, Index, Find and Bookmarks.
1a HID_HELP_TOOLBOXITEM_INDEX 23 Hides and shows the navigation pane
10 HID_HELP_TOOLBOX 48 The Toolbar contains important functions for controlling the Help system
1a HID_HELP_TOOLBOXITEM_START 31 Moves to the first page of the current Help topic
24 sfx%2Fui%2Fsearchdialog%2Fwholewords 1a Finds complete words only.
1d HID_HELP_TOOLBOXITEM_BACKWARD 1f Moves back to the previous page
11 .uno%3AHelpOnHelp 27 Provides an overview of the Help system
1f sfx%2Fui%2Fhelpcontrol%2Factive 5d The list box located at the very top is where you can select other %PRODUCTNAME Help modules.
1c HID_HELP_TOOLBOXITEM_FORWARD 1e Moves forward to the next page
1a HID_HELP_TOOLBOXITEM_PRINT 17 Prints the current page
1e HID_HELP_TOOLBOXITEM_BOOKMARKS 20 Adds this page to your bookmarks
21 HID_HELP_TOOLBOXITEM_SEARCHDIALOG 23 Opens the Find on this page dialog.
24 sfx%2Fui%2Fsearchdialog%2Fsearchterm 4e Enter the text that you want to search for or select a text entry in the list.
22 sfx%2Fui%2Fhelpindexpage%2Fdisplay 24 Click to display the selected topic.
28 sfx%2Fui%2Fhelpindexpage%2FHelpIndexPage 45 Double-click an entry or type the word you want to find in the index.
23 sfx%2Fui%2Fhelpsearchpage%2Fdisplay 28 Displays the entry selected in the list.
24 sfx%2Fui%2Fhelpsearchpage%2Fheadings 4a Specifies whether to only search in document headings for the search term.
22 sfx%2Fui%2Fhelpsearchpage%2Fsearch 3d Enter the search term here. The search is not case-sensitive.
20 sfx%2Fui%2Fhelpsearchpage%2Ffind 3b Click to start a full-text search for the term you entered.
23 sfx%2Fui%2Fhelpsearchpage%2Fresults 6a Lists the headings of the pages found in your full-text search. To display a page, double-click its entry.
29 sfx%2Fui%2Fhelpsearchpage%2Fcompletewords 6c Specifies whether to carry out an exact search for the word you entered. Incomplete words will not be found.
19 HID_HELP_BOOKMARKS_DELETE 1d deletes the bookmark selected
2a sfx%2Fui%2Fbookmarkdialog%2FBookmarkDialog 58 Displays the name of the bookmarked page. You can also type a new name for the bookmark.
2e sfx%2Fui%2Fhelpbookmarkpage%2FHelpBookmarkPage 7c Double-clicking a bookmark or pressing the Return key opens the assigned page in Help. A right-click opens the context menu.
17 HID_HELP_BOOKMARKS_OPEN 22 displays the selected help subject
19 HID_HELP_BOOKMARKS_RENAME 39 opens a dialog for entering another name for the bookmark
2c sfx%2Fui%2Fhelpcontentpage%2FHelpContentPage 56 Displays the main help themes, arranged in a similar way to folders in a file manager.
18 .uno%3AExtrusionTiltLeft 2f Tilts the selected object left by five degrees.
18 .uno%3AExtrusionTiltDown 34 Tilts the selected object downwards by five degrees.
17 .uno%3AExtrusion3DColor 22 Opens the Extrusion Color toolbar.
1f .uno%3AExtrusionLightingFloater 24 Opens the Extrusion Lighting window.
16 .uno%3AExtrusionToggle 3c Switches the 3D effects on and off for the selected objects.
19 .uno%3AExtrusionTiltRight 30 Tilts the selected object right by five degrees.
38 svx%2Fui%2Fextrustiondepthdialog%2FExtrustionDepthDialog 19 Enter an extrusion depth.
1c .uno%3AExtrusionDepthFloater 21 Opens the Extrusion Depth window.
1e .uno%3AExtrusionSurfaceFloater 23 Opens the Extrusion Surface window.
20 .uno%3AExtrusionDirectionFloater 25 Opens the Extrusion Direction window.
16 .uno%3AExtrusionTiltUp 32 Tilts the selected object upwards by five degrees.
1a SVX_HID_POPUP_LINEEND_CTRL 13 Select a direction.
14 .uno%3AAutoPilotMenu 63 Guides you through creating business and personal letters, faxes, agendas, presentations, and more.
14 HID_LTRWIZARD_CREATE 68 According to your selections, the wizard creates a new document template and saves it on your hard disk.
12 HID_LTRWIZARD_NEXT 3a Saves the current settings and continues to the next page.
12 HID_LTRWIZARD_BACK 46 Allows you to view the selections that you made on the previous steps.
16 .uno%3AAutoPilotLetter 28 Starts the wizard for a letter template.
1b HID_LTRWIZ_CHKBUSINESSPAPER 93 Specifies whether paper is used that already contains an imprinted logo, address, or footer line. The Wizard shows the Letterhead layout page next.
1b HID_LTRWIZ_LSTBUSINESSSTYLE 2b Select the design for your letter template.
10 HID_LETTER_PAGE1 45 Specifies whether you want to create a personal or a business letter.
1c HID_LTRWIZ_OPTBUSINESSLETTER 3d Specifies that you want to create a business letter template.
20 HID_LTRWIZ_OPTPRIVOFFICIALLETTER 3b Specifies that you want to create a formal personal letter.
1b HID_LTRWIZ_OPTPRIVATELETTER 34 Specifies that you want to create a personal letter.
1a HID_LTRWIZ_NUMFOOTERHEIGHT 81 Enter the height of the footer area that is already imprinted on your letterhead paper. %PRODUCTNAME does not print in that area.
19 HID_LTRWIZ_CHKPAPERFOOTER 6f Specifies that a footer area is already printed on your letterhead paper. %PRODUCTNAME does not print a footer.
21 HID_LTRWIZ_CHKPAPERCOMPANYADDRESS 6e Specifies that an address is already printed on your letterhead paper. %PRODUCTNAME does not print an address.
13 HID_LTRWIZ_NUMLOGOY 32 Sets the object distance from the top page margin.
13 HID_LTRWIZ_NUMLOGOX 33 Sets the object distance from the left page margin.
10 HID_LETTER_PAGE2 57 Allows you to specify the elements that are already imprinted on your letterhead paper.
1d HID_LTRWIZ_CHKCOMPANYRECEIVER a3 Specifies that your own address is already imprinted in small size above the area of the recipient's address. %PRODUCTNAME does not print an address in small size.
1e HID_LTRWIZ_CHKPAPERCOMPANYLOGO 66 Specifies that a logo is already printed on your letterhead paper. %PRODUCTNAME does not print a logo.
18 HID_LTRWIZ_NUMLOGOHEIGHT 21 Defines the height of the object.
17 HID_LTRWIZ_NUMLOGOWIDTH 20 Defines the width of the object.
19 HID_LTRWIZ_CHKUSEGREETING 59 Includes a complimentary close on the letter template. Select the text from the list box.
17 HID_LTRWIZ_CHKUSEFOOTER 29 Includes a footer on the letter template.
18 HID_LTRWIZ_CHKUSESUBJECT 2f Includes a subject line on the letter template.
10 HID_LETTER_PAGE3 38 Defines the items to be included in the letter template.
1b HID_LTRWIZ_CHKUSESALUTATION 56 Includes a salutation on the letter template. Select the salutation from the list box.
15 HID_LTRWIZ_CHKUSELOGO 27 Includes a logo on the letter template.
1a HID_LTRWIZ_CHKUSEBENDMARKS 2b Includes fold marks on the letter template.
20 HID_LTRWIZ_CHKUSEADDRESSRECEIVER 3c Includes a small size return address on the letter template.
16 HID_LTRWIZ_CHKUSESIGNS 4c Includes a line with references to a business letter on the letter template.
21 HID_LTRWIZ_OPTRECEIVERPLACEHOLDER 48 Specifies that placeholder fields are inserted into the letter template.
1c HID_LTRWIZ_TXTSENDERPOSTCODE 29 Specifies the address data of the sender.
1a HID_LTRWIZ_TXTSENDERSTREET 2b Specifies the street address of the sender.
10 HID_LETTER_PAGE4 2f Specifies the sender and recipient information.
1f HID_LTRWIZ_OPTSENDERPLACEHOLDER 4d Use the address data from %PRODUCTNAME - User Data in the Options dialog box.
1e HID_LTRWIZ_OPTRECEIVERDATABASE 3e Address database fields are inserted into the letter template.
1a HID_LTRWIZ_OPTSENDERDEFINE 33 Use the address data from the following text boxes.
18 HID_LTRWIZ_TXTSENDERNAME 21 Specifies the name of the sender.
1f HID_LTRWIZ_CHKFOOTERPAGENUMBERS 2e Includes page numbers in your letter template.
25 WIZARDS_HID_LTRWIZ_CHKFOOTERNEXTPAGES 30 Select to suppress the footer on the first page.
14 HID_LTRWIZ_TXTFOOTER 24 Enter the text for the footer lines.
10 HID_LETTER_PAGE5 39 Specifies the information to include in the footer space.
10 HID_LETTER_PAGE6 50 Specifies where and under which name you want to save the document and template.
19 HID_LTRWIZ_OPTMAKECHANGES 31 Saves the template and keeps it open for editing.
12 HID_LTRWIZ_TXTPATH 68 Enter the path and file name for the template, or click the ... button to select the path and file name.
1a HID_LTRWIZ_TXTTEMPLATENAME 2d Specifies the title of the document template.
1a HID_LTRWIZ_OPTCREATELETTER 5c Saves and closes the template, and then opens a new untitled document based on the template.
1c WIZARDS_HID_FAXWIZARD_CREATE b0 According to your selections, the wizard creates a document template and saves it. A new document based on the template appears in the work area, with the filename "UntitledX".
1a WIZARDS_HID_FAXWIZARD_NEXT 8a The wizard saves the current settings and goes to the next page. The Next button will become inactive once you have reached the last page.
1a WIZARDS_HID_FAXWIZARD_BACK c8 Click the Back button to view the settings chosen on the previous page. The current settings will not be modified or deleted if you click this button. Back will be active from the second page onwards.
13 .uno%3AAutoPilotFax 1b Opens the wizard for faxes.
1b WIZARDS_HID_LSTPRIVATESTYLE 1f Specifies the predefined style.
d HID_FAX_PAGE1 27 Defines the style of your fax document.
21 WIZARDS_HID_FAXWIZ_OPTBUSINESSFAX 30 Creates a fax template for a business-style fax.
23 WIZARDS_HID_FAXWIZ_LSTBUSINESSSTYLE 1f Specifies the predefined style.
20 WIZARDS_HID_FAXWIZ_OPTPRIVATEFAX 29 Creates a fax template for a private fax.
1b WIZARDS_HID_TXTSENDERSTREET 12 Includes a footer.
1c WIZARDS_HID_CHKUSESALUTATION 16 Includes a date field.
1a WIZARDS_HID_CHKUSEGREETING 46 Includes a communication type line. Select the line from the list box.
19 WIZARDS_HID_CHKUSESUBJECT 18 Includes a company logo.
d HID_FAX_PAGE2 29 Specifies the fax elements to be printed.
18 WIZARDS_HID_CHKUSEFOOTER 3f Includes a salutation. Select the salutation from the list box.
19 WIZARDS_HID_LSTSALUTATION 46 Includes a communication type line. Select the line from the list box.
17 WIZARDS_HID_LSTGREETING 18 Includes a subject line.
20 WIZARDS_HID_OPTSENDERPLACEHOLDER 3f Includes a salutation. Select the salutation from the list box.
1b WIZARDS_HID_OPTSENDERDEFINE 3b Includes a greeting. Select the greeting from the list box.
19 WIZARDS_HID_TXTSENDERNAME 3b Includes a greeting. Select the greeting from the list box.
1c WIZARDS_HID_FILETEMPLATEPATH 45 Inserts database fields for a later mail merge with the fax document.
18 WIZARDS_HID_TXTSENDERFAX 1e Enter the sender address data.
19 WIZARDS_HID_TXTSENDERCITY 76 Select to enter the address data in the following text boxes. The data is inserted as normal text in the fax document.
1a WIZARDS_HID_TXTSENDERSTATE 84 Inserts placeholders for the address on the fax template. Later in the fax document, click the placeholder to enter the actual data.
20 WIZARDS_HID_CHKFOOTERPAGENUMBERS 1e Enter the sender address data.
d HID_FAX_PAGE3 3a Specifies the receiver and sender information for the fax.
15 WIZARDS_HID_TXTFOOTER 1e Enter the sender address data.
1f WIZARDS_HID_OPTRECEIVERDATABASE 1e Enter the sender address data.
1e WIZARDS_HID_CHKFOOTERNEXTPAGES 1e Enter the sender address data.
22 WIZARDS_HID_OPTRECEIVERPLACEHOLDER 1e Enter the sender address data.
1b WIZARDS_HID_TXTTEMPLATENAME 84 Inserts placeholders for the address on the fax template. Later in the fax document, click the placeholder to enter the actual data.
d HID_FAX_PAGE4 1a Specifies the footer data.
d HID_FAX_PAGE5 27 Defines the template name and location.
16 .uno%3AAutoPilotAgenda 38 Starts the wizard to help you create an agenda template.
1f WIZARDS_HID_AGWIZ_1_CHK_MINUTES 4d Prints out a page on which you can write down the minutes during the meeting.
23 WIZARDS_HID_AGWIZ_1_LIST_PAGEDESIGN 29 Select the page design from the list box.
10 HID_AGENDA_PAGE1 27 Specifies a page design for the agenda.
2f SW%3AEDIT%3ADLG_WIZARD_AG%3ADLG_AG2_EDIT_METORT 26 Specifies the location of the meeting.
10 HID_AGENDA_PAGE2 3d Specifies the date, time, title, and location of the meeting.
34 SW%3ADATEFIELD%3ADLG_WIZARD_AG%3ADLG_AG2_DFLD_METDAT 22 Specifies the date of the meeting.
34 SW%3ATIMEFIELD%3ADLG_WIZARD_AG%3ADLG_AG2_TFLD_METTIM 22 Specifies the time of the meeting.
1d WIZARDS_HID_AGWIZ_2_TXT_TITLE 23 Specifies the title of the meeting.
10 HID_AGENDA_PAGE3 3e Specifies the headings that you want to include in the agenda.
24 WIZARDS_HID_AGWIZ_3_CHK_MEETING_TYPE 34 Specifies whether to print the type of meeting line.
1c WIZARDS_HID_AGWIZ_3_CHK_READ 2e Specifies whether to print a Please read line.
1d WIZARDS_HID_AGWIZ_3_CHK_NOTES 28 Specifies whether to print a Notes line.
1d WIZARDS_HID_AGWIZ_3_CHK_BRING 2f Specifies whether to print a Please bring line.
27 WIZARDS_HID_AGWIZ_4_CHK_RESOURCEPERSONS 4d Specifies whether to print a line where you can enter the facility personnel.
22 WIZARDS_HID_AGWIZ_4_CHK_TIMEKEEPER 44 Specifies whether to print a line where you can enter the moderator.
21 WIZARDS_HID_AGWIZ_4_CHK_ATTENDEES 44 Specifies whether to print a line where you can enter the attendees.
10 HID_AGENDA_PAGE4 30 Specifies the names to be printed on the agenda.
21 WIZARDS_HID_AGWIZ_4_CHK_OBSERVERS 44 Specifies whether to print a line where you can enter the observers.
21 WIZARDS_HID_AGWIZ_4_CHK_CALLED_BY 58 Specifies whether to print a line where you can enter the person who called the meeting.
23 WIZARDS_HID_AGWIZ_4_CHK_FACILITATOR 46 Specifies whether to print a line where you can enter the chairperson.
21 WIZARDS_HID_AGWIZ_4_CHK_NOTETAKER 48 Specifies whether to print a line where you can enter the minute keeper.
1c WIZARDS_HID_AGWIZ_5_BTN_DOWN 21 Moves the current topic row down.
1a WIZARDS_HID_AGWIZ_5_BTN_UP 1f Moves the current topic row up.
1e WIZARDS_HID_AGWIZ_5_BTN_INSERT 34 Inserts a new empty topic row above the current row.
10 HID_AGENDA_PAGE5 3a Specifies the topics to be printed on the agenda template.
1f WIZARDS_HID_AGWIZ_5_TXT_TOPIC_1 52 Enter the agenda topics. Use the Move up and Move down buttons to sort the topics.
1e WIZARDS_HID_AGWIZ_5_BTN_REMOVE 1e Removes the current topic row.
25 WIZARDS_HID_AGWIZ_5_TXT_RESPONSIBLE_1 52 Enter the agenda topics. Use the Move up and Move down buttons to sort the topics.
21 WIZARDS_HID_AGWIZ_5_TXT_MINUTES_1 52 Enter the agenda topics. Use the Move up and Move down buttons to sort the topics.
23 WIZARDS_HID_AGWIZ_6_OPT_MAKECHANGES 53 Creates and saves the agenda template, then opens the template for further editing.
24 WIZARDS_HID_AGWIZ_6_OPT_CREATEAGENDA 5f Creates and saves the agenda template, then opens a new agenda document based on that template.
10 HID_AGENDA_PAGE6 36 Choose the title and location for the agenda template.
24 WIZARDS_HID_AGWIZ_6_TXT_TEMPLATENAME 2a Specifies the name of the agenda template.
24 WIZARDS_HID_AGWIZ_6_TXT_TEMPLATEPATH 4c Specifies the complete path, including the file name of the agenda template.
24 WIZARDS_HID_AGWIZ_6_BTN_TEMPLATEPATH 4c Specifies the complete path, including the file name of the agenda template.
24 SD%3APUSHBUTTON%3ADLG_ASS%3ABUT_NEXT 34 Accepts the new settings and moves to the next page.
24 SD%3APUSHBUTTON%3ADLG_ASS%3ABUT_LAST 44 Returns to the previous step without deleting your current settings.
d SID_AUTOPILOT 7f Use the wizard to interactively create a presentation. With the wizard, you can modify the sample templates to suit your needs.
40 modules%2Fsimpress%2Fui%2Fassistentdialog%2FstartWithCheckbutton 71 Specifies that you only want the Wizard to start when you expressly request it with File - Wizard - Presentation.
3e modules%2Fsimpress%2Fui%2Fassistentdialog%2FpreviewCheckbutton 36 Specifies that templates appear in the preview window.
3d modules%2Fsimpress%2Fui%2Fassistentdialog%2FtemplatesTreeview 3a Lists the available template categories for presentations.
36 modules%2Fsimpress%2Fui%2Fassistentdialog%2FopenButton 108 Lists the presentations that you created and saved to the Templates directory that is specified under %PRODUCTNAME - Paths in the Options dialog box. To edit the layout and formatting of a presentation with the wizard, select the presentation, and then click Next.
3c modules%2Fsimpress%2Fui%2Fassistentdialog%2FemptyRadiobutton 23 Creates a new (empty) presentation.
34 modules%2Fsimpress%2Fui%2Fassistentdialog%2Fpage1Box 44 Specifies the presentation type and allows you to select a template.
3f modules%2Fsimpress%2Fui%2Fassistentdialog%2FtemplateRadiobutton 3d Opens a list box containing various modifiable presentations.
3b modules%2Fsimpress%2Fui%2Fassistentdialog%2FopenRadiobutton 34 Displays a list of previously created presentations.
3e modules%2Fsimpress%2Fui%2Fassistentdialog%2Fmedium2Radiobutton 2c Creates a presentation to be used as slides.
3e modules%2Fsimpress%2Fui%2Fassistentdialog%2Fmedium1Radiobutton 2c Creates a computer screen presentation only.
3a modules%2Fsimpress%2Fui%2Fassistentdialog%2FlayoutTreeview 5e Allows you to select a slide design for the presentation you selected on page 1 of the Wizard.
3e modules%2Fsimpress%2Fui%2Fassistentdialog%2Fmedium3Radiobutton 3d Creates a presentation to be used as overhead transparencies.
3e modules%2Fsimpress%2Fui%2Fassistentdialog%2Fmedium5Radiobutton 2e Uses the original page format of the template.
3e modules%2Fsimpress%2Fui%2Fassistentdialog%2Fmedium4Radiobutton 34 Creates a presentation that can be printed on paper.
3b modules%2Fsimpress%2Fui%2Fassistentdialog%2FbreakSpinbutton 2c Defines the pause between each presentation.
3a modules%2Fsimpress%2Fui%2Fassistentdialog%2FtimeSpinbutton 2f Defines the duration of each presentation page.
34 modules%2Fsimpress%2Fui%2Fassistentdialog%2Fpage3Box 46 Assigns special effects to your presentation and determines its speed.
3c modules%2Fsimpress%2Fui%2Fassistentdialog%2FkioskRadiobutton 49 Runs the presentation automatically, and restarts it again after a break.
3a modules%2Fsimpress%2Fui%2Fassistentdialog%2FeffectCombobox 2a Specifies an effect for your presentation.
3b modules%2Fsimpress%2Fui%2Fassistentdialog%2FlogoCheckbutton 5f Specifies whether to display the $[officename] logo during the pause between each presentation.
39 modules%2Fsimpress%2Fui%2Fassistentdialog%2FspeedCombobox 1c Determines the effect speed.
3b modules%2Fsimpress%2Fui%2Fassistentdialog%2FliveRadiobutton 60 The Default option runs the presentation as a full screen presentation with the specified speed.
42 modules%2Fsimpress%2Fui%2Fassistentdialog%2FaskInformationTextview 66 Use this field for further thoughts and ideas that you would like to cover later in your presentation.
39 modules%2Fsimpress%2Fui%2Fassistentdialog%2FaskTopicEntry 29 Specifies the topic of your presentation.
38 modules%2Fsimpress%2Fui%2Fassistentdialog%2FaskNameEntry 30 Specifies your name or the name of your company.
3e modules%2Fsimpress%2Fui%2Fassistentdialog%2FsummaryCheckbutton 2f Creates a summary of all presentation contents.
1d WIZARDS_HID_DLGFORM_CMDFINISH 39 Click to create the form without answering further pages.
12 HID_DLGFORM_DIALOG 28 Activates the Wizard for creating forms.
1a HID_DLGFORM_FIELDSSELECTED 2d Displays the fields that are in the new form.
23 WIZARDS_HID_DLGFORM_SUB_CMDMOVEDOWN 3c Click to move the selected field down one entry in the list.
2c WIZARDS_HID_DLGTABLE_CMDMOVEDOWN_PK_SELECTED 3c Click to move the selected field down one entry in the list.
20 WIZARDS_HID_DLGTABLE_CMDMOVEDOWN 3c Click to move the selected field down one entry in the list.
19 WIZARDS_HID2_BTN_DOC_DOWN 3c Click to move the selected field down one entry in the list.
26 WIZARDS_HID_DLGFORM_MASTER_CMDMOVEDOWN 3c Click to move the selected field down one entry in the list.
21 WIZARDS_HID_DLGFORM_SUB_CMDMOVEUP 3a Click to move the selected field up one entry in the list.
27 WIZARDS_HID_QUERYWIZARD_CMDFILTERMOVEUP 3a Click to move the selected field up one entry in the list.
2a WIZARDS_HID_DLGTABLE_CMDMOVEUP_PK_SELECTED 3a Click to move the selected field up one entry in the list.
29 WIZARDS_HID_QUERYWIZARD_CMDFILTERMOVEDOWN 3c Click to move the selected field down one entry in the list.
1b HID_DLGFORM_CMDMOVESELECTED 4d Click to move the selected field(s) to the box that the arrow is pointing to.
1b HID_DLGFORM_FIELDSAVAILABLE 47 Lists the names of the data base fields in the selected table or query.
16 HID_DLGFORM_CMDMOVEALL 42 Click to move all fields to the box that the arrow is pointing to.
14 HID_DLGFORM_LBTABLES 42 Specifies the table or query that you want to create the form for.
1d HID_DLGFORM_CMDREMOVESELECTED 4d Click to move the selected field(s) to the box that the arrow is pointing to.
23 WIZARDS_HID_QUERYWIZARD_CMDMOVEDOWN 3c Click to move the selected field down one entry in the list.
18 HID_DLGFORM_CMDREMOVEALL 42 Click to move all fields to the box that the arrow is pointing to.
24 WIZARDS_HID_DLGFORM_MASTER_CMDMOVEUP 3a Click to move the selected field up one entry in the list.
21 WIZARDS_HID_QUERYWIZARD_CMDMOVEUP 3a Click to move the selected field up one entry in the list.
17 WIZARDS_HID2_BTN_DOC_UP 3a Click to move the selected field up one entry in the list.
1e WIZARDS_HID_DLGTABLE_CMDMOVEUP 3a Click to move the selected field up one entry in the list.
25 WIZARDS_HID_DLGFORM_OPTSELECTMANUALLY 3d Click to add a subform based on a manual selection of fields.
20 WIZARDS_HID_DLGFORM_lstRELATIONS 32 Select the relation on which the subform is based.
29 WIZARDS_HID_DLGFORM_OPTONEXISTINGRELATION 35 Click to add a subform based on an existing relation.
24 WIZARDS_HID_DLGFORM_CHKCREATESUBFORM 18 Select to add a subform.
26 WIZARDS_HID_DLGFORM_SUB_FIELDSSELECTED 3d Displays all fields that will be included in the new subform.
20 WIZARDS_HID_DLGFORM_SUB_LBTABLES 44 Specifies the table or query for which the subform is to be created.
28 WIZARDS_HID_DLGFORM_LINKER_LSTSLAVELINK4 77 Select the subform field that is joined to the main form field, which you select in the list box next to this list box.
28 WIZARDS_HID_DLGFORM_LINKER_LSTSLAVELINK3 77 Select the subform field that is joined to the main form field, which you select in the list box next to this list box.
28 WIZARDS_HID_DLGFORM_LINKER_LSTSLAVELINK1 77 Select the subform field that is joined to the main form field, which you select in the list box next to this list box.
28 WIZARDS_HID_DLGFORM_LINKER_LSTSLAVELINK2 77 Select the subform field that is joined to the main form field, which you select in the list box next to this list box.
29 WIZARDS_HID_DLGFORM_LINKER_LSTMASTERLINK4 77 Select the main form field that is joined to the subform field, which you select in the list box next to this list box.
29 WIZARDS_HID_DLGFORM_LINKER_LSTMASTERLINK3 77 Select the main form field that is joined to the subform field, which you select in the list box next to this list box.
29 WIZARDS_HID_DLGFORM_LINKER_LSTMASTERLINK1 77 Select the main form field that is joined to the subform field, which you select in the list box next to this list box.
29 WIZARDS_HID_DLGFORM_LINKER_LSTMASTERLINK2 77 Select the main form field that is joined to the subform field, which you select in the list box next to this list box.
1b HID_DLGFORM_CMDTOPJUSTIFIED 31 Arranges the labels above the corresponding data.
19 HID_DLGFORM_CMDTABLESTYLE 2d Aligns the database fields in a tabular form.
19 HID_DLGFORM_CMDALIGNRIGHT 1d The labels are right-aligned.
1a HID_DLGFORM_CMDLEFTLABELED 51 Aligns the database fields column-wise with the labels to the left of the fields.
18 HID_DLGFORM_CMDALIGNLEFT 1c The labels are left-aligned.
19 HID_DLGFORM_CMDTOPLABELED 47 Aligns the database fields column-wise with the labels above the field.
22 WIZARDS_HID_DLGFORM_OPTNEWDATAONLY 37 Creates a form that is only used for entering new data.
21 WIZARDS_HID_DLGFORM_CHKNOADDITION 23 Select to disallow adding new data.
25 WIZARDS_HID_DLGFORM_OPTDISPLAYALLDATA 4f Creates a form that can be used to display existing data and to enter new data.
25 WIZARDS_HID_DLGFORM_CHKNOMODIFICATION 20 Select to disallow editing data.
21 WIZARDS_HID_DLGFORM_CHKNODELETION 21 Select to disallow deleting data.
23 WIZARDS_HID_DLGFORM_CMDSIMPLEBORDER 2b Specifies that the field borders look flat.
1f WIZARDS_HID_DLGFORM_CMDNOBORDER 29 Specifies that the fields have no border.
1f WIZARDS_HID_DLGFORM_CMD3DBORDER 30 Specifies that the field borders have a 3D look.
1d WIZARDS_HID_DLGFORM_LSTSTYLES 26 Specifies the page style for the form.
21 WIZARDS_HID_DLGFORM_OPTMODIFYFORM 3f Saves the form, and opens it in edit mode to change the layout.
23 WIZARDS_HID_DLGFORM_OPTWORKWITHFORM 4a Saves the form, and opens it as a form document to enter and display data.
1b WIZARDS_HID_DLGFORM_TXTPATH 1f Specifies the name of the form.
1c WIZARDS_HID_DLGREPORT_DIALOG 1d Select the report properties.
1a HID_DOCUMENT_CREATE_REPWIZ 2a Activates the wizard for creating reports.
1c HID_DLGREPORT_1_CMDREMOVEALL 42 Click to move all fields to the box that the arrow is pointing to.
21 HID_DLGREPORT_1_CMDREMOVESELECTED 4d Click to move the selected field(s) to the box that the arrow is pointing to.
1a HID_DLGREPORT_1_CMDMOVEALL 42 Click to move all fields to the box that the arrow is pointing to.
18 HID_DLGREPORT_1_LBTABLES 40 Select the table or query for which the report is to be created.
1e HID_DLGREPORT_1_FIELDSSELECTED 38 Displays all fields that are included in the new report.
1f HID_DLGREPORT_1_FIELDSAVAILABLE 4a Displays the names of the data base fields in the selected table or query.
1f HID_DLGREPORT_1_CMDMOVESELECTED 4d Click to move the selected field(s) to the box that the arrow is pointing to.
1a HID_DLGREPORT_6_TXTTITLE_6 94 Displays the names of the fields to be included in the report. At the right you can enter a label for each field that will be printed in the report.
18 HID_DLGREPORT_2_CMDGROUP 4a Click to move the selected field to the box that the arrow is pointing to.
1a HID_DLGREPORT_2_CMDUNGROUP 4a Click to move the selected field to the box that the arrow is pointing to.
1f HID_DLGREPORT_2_PREGROUPINGDEST b4 Lists the fields by which the report will be grouped. To remove one level of grouping, select the field name, then click the < button. You may select up to four levels of grouping.
18 HID_DLGREPORT_2_GROUPING c6 Lists the fields from your selection on the previous page of the Wizard. To group the report by a field, select the field name, then click the > button. You may select up to four levels of grouping.
1b HID_DLGREPORT_3_OPTDESCEND4 2d Sorts the field contents in descending order.
15 HID_DLGREPORT_3_SORT4 37 Select an additional field by which to sort the report.
1a HID_DLGREPORT_3_OPTASCEND4 2c Sorts the field contents in ascending order.
15 HID_DLGREPORT_3_SORT1 33 Select the first field by which to sort the report.
18 HID_DLGREPORT_4_PORTRAIT 33 Selects a portrait page orientation for the report.
19 HID_DLGREPORT_4_LANDSCAPE 34 Selects a landscape page orientation for the report.
1a HID_DLGREPORT_4_PAGELAYOUT 8a Defines a page layout for the report. The page layouts are loaded from template files, which assign a header, footer, and page background.
1a HID_DLGREPORT_4_DATALAYOUT 65 Defines a set of styles for the report. The styles assign fonts, indents, table background, and more.
1e HID_DLGREPORT_5_OPTUSETEMPLATE 30 When you click Finish, the report will be saved.
15 HID_DLGREPORT_4_TITLE 43 Specifies the title that is printed at the title line of each page.
1f HID_DLGREPORT_5_OPTEDITTEMPLATE 44 When you click Finish, the report will be saved and opened for edit.
1f HID_DLGREPORT_5_OPTSTATDOCUMENT 89 Saves the report as a static report. When you open a static report, it will always display the data from the time the report was created.
1e HID_DLGREPORT_5_OPTDYNTEMPLATE 6f Saves the report as a template. When you open a dynamic report, it will display with the current data contents.
3b modules%2Fsimpress%2Fui%2Fpublishingdialog%2FnextPageButton 36 Saves the current settings and moves to the next page.
3b modules%2Fsimpress%2Fui%2Fpublishingdialog%2FlastPageButton 34 Returns to the selections made on the previous page.
3c modules%2Fsimpress%2Fui%2Fpublishingdialog%2FdesignsTreeview 1e Displays all existing designs.
41 modules%2Fsimpress%2Fui%2Fpublishingdialog%2FoldDesignRadiobutton 81 Loads an existing design from the design list to use as a starting point for the steps to follow on the next pages of the Wizard.
3c modules%2Fsimpress%2Fui%2Fpublishingdialog%2FdelDesingButton 31 Deletes the selected design from the design list.
41 modules%2Fsimpress%2Fui%2Fpublishingdialog%2FnewDesignRadiobutton 35 Creates a new design in the next pages of the Wizard.
37 modules%2Fsimpress%2Fui%2Fpublishingdialog%2FindexEntry 66 Specifies the URL (absolute or relative) to be entered by the viewer in order to see the presentation.
3c modules%2Fsimpress%2Fui%2Fpublishingdialog%2FperlRadiobutton 3d Used by WebCast export to create HTML pages and Perl scripts.
35 modules%2Fsimpress%2Fui%2Fpublishingdialog%2FCGIEntry 48 Specifies the URL (absolute or relative) for the generated Perl scripts.
3b modules%2Fsimpress%2Fui%2Fpublishingdialog%2FASPRadiobutton 99 When you select the ASP option, the WebCast export creates ASP pages. Note that the HTML presentation can only be offered by a web server supporting ASP.
3d modules%2Fsimpress%2Fui%2Fpublishingdialog%2FnotesCheckbutton 2d Specifies that your notes are also displayed.
3f modules%2Fsimpress%2Fui%2Fpublishingdialog%2FcontentCheckbutton 27 Creates a title page for your document.
40 modules%2Fsimpress%2Fui%2Fpublishingdialog%2FstandardRadiobutton 2e Creates standard HTML pages from export pages.
3f modules%2Fsimpress%2Fui%2Fpublishingdialog%2FchgAutoRadiobutton 8b The page transition takes place automatically after the specified period of time elapses and does not depend on the presentation's contents
3e modules%2Fsimpress%2Fui%2Fpublishingdialog%2FframesRadiobutton b2 Creates standard HTML pages with frames. The exported page will be placed in the main frame, and the frame to the left will display a table of contents in the form of hyperlinks.
3d modules%2Fsimpress%2Fui%2Fpublishingdialog%2FkioskRadiobutton 87 Creates a default HTML presentation as a kiosk export, in which the slides are automatically advanced after a specified amount of time.
3f modules%2Fsimpress%2Fui%2Fpublishingdialog%2FdurationSpinbutton 32 Defines the amount of time for each slide display.
42 modules%2Fsimpress%2Fui%2Fpublishingdialog%2FchgDefaultRadiobutton d4 The slide transition depends on the timing that you set for each slide in the presentation. If you set a manual page transition, the HTML presentation introduces a new page by pressing any key from your keyboard.
3f modules%2Fsimpress%2Fui%2Fpublishingdialog%2FendlessCheckbutton 55 Automatically restarts the HTML presentation after the last slide has been displayed.
35 modules%2Fsimpress%2Fui%2Fpublishingdialog%2FURLEntry 6f Specifies the URL (absolute or relative), where the created HTML presentation on the web server has been saved.
3f modules%2Fsimpress%2Fui%2Fpublishingdialog%2FwebCastRadiobutton 52 In a WebCast export, automatic scripts will be generated with Perl or ASP support.
43 modules%2Fsimpress%2Fui%2Fpublishingdialog%2Fresolution3Radiobutton 3a Select a high resolution for a high quality slide display.
3c modules%2Fsimpress%2Fui%2Fpublishingdialog%2FqualityCombobox b4 Specifies the compression factor of the JPEG graphic. A 100% value offers the best quality for a large data range. The 25% factor indicates small files with inferior image quality.
32 modules%2Fsimpress%2Fui%2Fpublishingdialog%2Fpage3 79 The files are exported as PNG files. PNG files are compressed without loss of data, and can contain more than 256 colors.
43 modules%2Fsimpress%2Fui%2Fpublishingdialog%2Fresolution2Radiobutton 3d Select the medium resolution for a medium-sized presentation.
3b modules%2Fsimpress%2Fui%2Fpublishingdialog%2FgifRadiobutton 75 The files are exported as GIF files. GIF files are compressed without loss of data, and have a maximum of 256 colors.
40 modules%2Fsimpress%2Fui%2Fpublishingdialog%2FsldSoundCheckbutton 60 Specifies that the sound files that are defined as an effect for slide transitions are exported.
43 modules%2Fsimpress%2Fui%2Fpublishingdialog%2Fresolution1Radiobutton 5f Select the low resolution to keep the file size small, even for presentations with many slides.
3b modules%2Fsimpress%2Fui%2Fpublishingdialog%2FpngRadiobutton 79 The files are exported as PNG files. PNG files are compressed without loss of data, and can contain more than 256 colors.
3b modules%2Fsimpress%2Fui%2Fpublishingdialog%2FjpgRadiobutton 82 The files are exported as JPEG files. JPEG files are compressed, with adjustable compression and can contain more than 256 colors.
39 modules%2Fsimpress%2Fui%2Fpublishingdialog%2FmiscTextview 36 Specifies additional text to appear on the title page.
35 modules%2Fsimpress%2Fui%2Fpublishingdialog%2FwwwEntry 49 Specifies your homepage. A hyperlink will be inserted in the publication.
37 modules%2Fsimpress%2Fui%2Fpublishingdialog%2FemailEntry 1d Specifies the e-mail address.
38 modules%2Fsimpress%2Fui%2Fpublishingdialog%2FauthorEntry 2f Specifies the name of the publication's author.
40 modules%2Fsimpress%2Fui%2Fpublishingdialog%2FtextOnlyCheckbutton 30 Inserts only text hyperlinks instead of buttons.
38 modules%2Fsimpress%2Fui%2Fpublishingdialog%2FvLinkButton 58 Opens the Color dialog, where you can select the visited link color of the presentation.
37 modules%2Fsimpress%2Fui%2Fpublishingdialog%2FlinkButton 55 Opens the Color dialog, where you can select the hyperlink color of the presentation.
38 modules%2Fsimpress%2Fui%2Fpublishingdialog%2FaLinkButton 57 Opens the Color dialog, where you can select the active link color of the presentation.
41 modules%2Fsimpress%2Fui%2Fpublishingdialog%2FdocColorsRadiobutton 43 Determines the colors from the styles used in the current document.
37 modules%2Fsimpress%2Fui%2Fpublishingdialog%2FtextButton 50 Opens the Color dialog, where you can select the text color of the presentation.
37 modules%2Fsimpress%2Fui%2Fpublishingdialog%2FbackButton 56 Opens the Color dialog, where you can select the background color of the presentation.
3f modules%2Fsimpress%2Fui%2Fpublishingdialog%2FdefaultRadiobutton 34 Uses the default colors of the viewer's Web Browser.
3c modules%2Fsimpress%2Fui%2Fpublishingdialog%2FuserRadiobutton 43 Allows you to define your own colors for some presentation objects.
15 HID_LISTWIZARD_FINISH 13 Creates the object.
3a modules%2Fsabpilot%2Fui%2Fgroupradioselectionpage%2Ftoleft 31 Removes the selected option fields from the list.
40 modules%2Fsabpilot%2Fui%2Fgroupradioselectionpage%2Fradiobuttons 46 Displays all option fields which have to be included in the group box.
3b modules%2Fsabpilot%2Fui%2Fgroupradioselectionpage%2Ftoright 4a Confirms the current label and copies the label to the Option fields list.
3f modules%2Fsabpilot%2Fui%2Fgroupradioselectionpage%2Fradiolabels 6d Specifies the respective label for each option field. You will see the label of the option field in the form.
48 modules%2Fsabpilot%2Fui%2Fdefaultfieldselectionpage%2Fdefaultselectionno 49 Specifies that you do not want any option field to be the default choice.
47 modules%2Fsabpilot%2Fui%2Fdefaultfieldselectionpage%2Fdefselectionfield 53 Select the option field that you want to have as the default when opening the form.
49 modules%2Fsabpilot%2Fui%2Fdefaultfieldselectionpage%2Fdefaultselectionyes 5b Specifies that you want an option field to be selected as a default after opening the form.
39 modules%2Fsabpilot%2Fui%2Foptionvaluespage%2Fradiobuttons 49 Select the option field for which you want to assign the reference value.
38 modules%2Fsabpilot%2Fui%2Foptionvaluespage%2Foptionvalue 4d Select a number or a text as a reference value for the selected option field.
43 modules%2Fsabpilot%2Fui%2Foptionsdbfieldpage%2FstoreInFieldCombobox 45 Select the data field in which the reference values have to be saved.
3c modules%2Fsabpilot%2Fui%2Foptionsdbfieldpage%2FnoRadiobutton 5f Specifies that you want to save the reference values in the form only, and not in the database.
3d modules%2Fsabpilot%2Fui%2Foptionsdbfieldpage%2FyesRadiobutton 43 Specifies that you want to save the reference values in a database.
33 modules%2Fsabpilot%2Fui%2Foptionsfinalpage%2Fnameit 66 Specifies the label for the option box. You will see the label of the group box displayed in the form.
1c WIZARDS_HID_DLGIMPORT_DIALOG 55 Copies and converts documents into the OpenDocument XML format used by $[officename].
27 macro%3A%2F%2F%2FImportWizard.Main.Main 55 Copies and converts documents into the OpenDocument XML format used by $[officename].
1f WIZARDS_HID_DLGIMPORT_0_CMDHELP 55 Copies and converts documents into the OpenDocument XML format used by $[officename].
1a HID_DLGIMPORT_0_CHKLOGFILE 56 Creates a log file in your work directory showing which documents have been converted.
1d HID_DLGIMPORT_2_CHKPOWERPOINT 5a Converts documents in Microsoft PowerPoint format *.ppt into OpenDocument *.odp documents.
18 HID_DLGIMPORT_2_CHKEXCEL 55 Converts documents in Microsoft Excel format *.xls into OpenDocument *.ods documents.
17 HID_DLGIMPORT_2_CHKWORD 54 Converts documents in Microsoft Word format *.doc into OpenDocument *.odt documents.
25 HID_DLGIMPORT_2_CMDDOCUMENTPATHSELECT 2a Opens a dialog to select the desired path.
1a HID_DLGIMPORT_2_CBTEMPLATE 2d Specifies that templates are to be converted.
1a HID_DLGIMPORT_2_CBDOCUMENT 31 Indicates that the documents are to be converted.
21 HID_DLGIMPORT_2_CBDOCUMENTRECURSE 61 Indicates that the subdirectories of the selected directory are also searched for matching files.
1e HID_DLGIMPORT_2_LBDOCUMENTPATH 34 Specifies the directory containing the source files.
1e HID_DLGIMPORT_2_EDDOCUMENTPATH 43 Specifies the directory to which the destination files are written.
17 HID_DLGCONVERT_LISTBOX1 32 Displays the ranges to be converted from the list.
1c HID_DLGCONVERT_OPTIONBUTTON2 3f All currency cells in the active spreadsheet will be converted.
1c HID_DLGCONVERT_OPTIONBUTTON1 36 All cells with the selected Cell Styles are converted.
18 HID_DLGCONVERT_CHECKBOX1 1d Converts the entire document.
15 HID_DLGCONVERT_CBBACK 97 If the current document is a $[officename] Calc document or template, you can call up the Euro Converter using the corresponding icon in the Tools bar.
15 HID_DLGCONVERT_CBHELP 22 Activates the help for the dialog.
17 HID_DLGCONVERT_CBCANCEL 1a Closes the Euro Converter.
1c HID_DLGCONVERT_OPTIONBUTTON4 5b All currency cells in the range selected before the converter was called will be converted.
1b HID_DLGCONVERT_CBTARGETOPEN 4f Opens a dialog in which you can select a directory to hold the converted files.
1c HID_DLGCONVERT_OPTIONBUTTON3 3c All currency cells in the active document will be converted.
15 HID_DLGCONVERT_OBFILE 2a Converts a single $[officename] Calc file.
15 HID_DLGCONVERT_CBGOON 16 Starts the conversion.
14 HID_DLGCONVERT_OBDIR 6b Converts all $[officename] Calc and $[officename] Writer documents and templates in the selected directory.
18 HID_DLGCONVERT_COMBOBOX1 32 Specifies the currency to be converted into euros.
14 .uno%3AEuroConverter 8a Converts the currency amounts found in $[officename] Calc documents and in fields and tables of $[officename] Writer documents into euros.
17 HID_DLGCONVERT_TBSOURCE 4b Indicates the directory or the name of the single document to be converted.
1d HID_DLGCONVERT_CHECKRECURSIVE 48 Specifies whether all subfolders of the selected directory are included.
1f HID_DLGCONVERT_CHKTEXTDOCUMENTS 57 Converts currency amounts found in fields and tables of $[officename] Writer documents.
19 HID_DLGCONVERT_CHKPROTECT bc Specifies that sheet protection will be disabled during conversion and thereafter re-enabled. If sheet protection is covered by a password, you will see a dialog for entering the password.
1b HID_DLGCONVERT_CBSOURCEOPEN 3b Opens a dialog to select the desired directory or document.
17 HID_DLGCONVERT_TBTARGET 4b Specifies the folder and path in which the converted files are to be saved.
15 HID_ABSPILOT_PREVIOUS 14 Go to previous step.
13 HID_ABSPILOT_CANCEL 32 Exits the wizard without implementing any changes.
13 HID_ABSPILOT_FINISH 44 Establishes the connection to the data source and closes the dialog.
34 modules%2Fsabpilot%2Fui%2Fselecttypepage%2Fgroupwise 43 Select this option if you already use an address book in Groupwise.
34 modules%2Fsabpilot%2Fui%2Fselecttypepage%2Fevolution 43 Select this option if you already use an address book in Evolution.
31 modules%2Fsabpilot%2Fui%2Fselecttypepage%2Fmacosx 4b Select this option if you already use an address book in OS X Address book.
17 EXTENSIONS_HID_ABSPILOT 51 This wizard registers an existing address book as a data source in $[officename].
36 modules%2Fsabpilot%2Fui%2Fselecttypepage%2Fthunderbird 50 Select this option if you already use an address book in Thunderbird or Icedove.
c slot%3A10934 51 This wizard registers an existing address book as a data source in $[officename].
11 HID_ABSPILOT_NEXT 10 Go to next step.
21 .uno%3AAutoPilotAddressDataSource 51 This wizard registers an existing address book as a data source in $[officename].
2e modules%2Fsabpilot%2Fui%2Fselecttypepage%2Fkde 4a Select this option if you already use an address book in KDE Address book.
30 modules%2Fsabpilot%2Fui%2Fselecttypepage%2Fother 60 Select this option if you want to register another data source as address book in $[officename].
32 modules%2Fsabpilot%2Fui%2Fselecttypepage%2Fevoldap 48 Select this option if you already use an address book in Evolution LDAP.
39 modules%2Fsabpilot%2Fui%2Fselecttypepage%2FSelectTypePage 51 This wizard registers an existing address book as a data source in $[officename].
2f modules%2Fsabpilot%2Fui%2Fselecttypepage%2Fldap 46 Select this option if you already have address data on an LDAP server.
32 modules%2Fsabpilot%2Fui%2Fselecttypepage%2Foutlook 61 Select this option if you already use an address book in Microsoft Outlook (not Outlook Express).
32 modules%2Fsabpilot%2Fui%2Fselecttypepage%2Ffirefox 4e Select this option if you already use an address book in Firefox or Iceweasel.
32 modules%2Fsabpilot%2Fui%2Fselecttypepage%2Fwindows 53 Select this option if you already use an address book in Microsoft Outlook Express.
34 modules%2Fsabpilot%2Fui%2Finvokeadminpage%2Fsettings 3a Calls a dialog in which you can enter additional settings.
3b modules%2Fsabpilot%2Fui%2Finvokeadminpage%2FInvokeAdminPage 5e Allows you to enter additional settings for LDAP address data and other external data sources.
31 modules%2Fsabpilot%2Fui%2Fselecttablepage%2Ftable 59 Specifies the table that is to serve as the address book for the $[officename] templates.
3b modules%2Fsabpilot%2Fui%2Fselecttablepage%2FSelectTablePage 76 Specifies a table from the Seamonkey / Netscape address book source that is used as the address book in $[officename].
39 modules%2Fsabpilot%2Fui%2Fdatasourcepage%2FDataSourcePage 81 Specifies a location for the address book file and a name under which the data source will be listed in the data source explorer.
2f modules%2Fsabpilot%2Fui%2Fdatasourcepage%2Fname 1f Specifies the data source name.
31 modules%2Fsabpilot%2Fui%2Fdatasourcepage%2Fbrowse 2b Specifies the location using a file dialog.
1f DBACCESS_HID_DSADMIN_BROWSECONN 2b Specifies the location using a file dialog.
34 modules%2Fsabpilot%2Fui%2Fdatasourcepage%2Favailable db Registers the newly created database file in %PRODUCTNAME. The database will then be listed in the data source window (F4). If this check box is cleared, the database will be available only by opening the database file.
32 modules%2Fsabpilot%2Fui%2Ffieldassignpage%2Fassign 34 Opens the Templates: Address Book Assignment dialog.
3b modules%2Fsabpilot%2Fui%2Ffieldassignpage%2FFieldAssignPage 3f Opens a dialog that allows you to specify the field assignment.
5 34200 46 The Web Wizard helps you to maintain a web site on an Internet server.
5 34209 1e Deletes the selected settings.
5 34207 7f Select the settings that you want to load and then click Load. To start the wizard with the default settings, select "default".
5 34217 37 Enter the name of the author for the selected document.
5 34216 2e Enter a description for the selected document.
5 34215 88 Enter the title for the selected document. The title appears as a hyperlink to the selected document on the index page of your web site.
5 34210 f9 Lists the documents that you want to publish to your web site. The wizard can convert %PRODUCTNAME documents to HTML, PDF, or, in some cases, Flash format before the documents are uploaded. All other files are uploaded in their original file format.
5 34211 dd Opens a dialog where you can select the files that you want to upload to your web site. The order of the list determines the order in which the hyperlinks to the documents are displayed on the index page of your web site.
5 34212 28 Removes the selected file from the list.
5 34218 44 Select the file format that you want to export the selected file to.
5 34220 25 Select the layout for the index page.
5 34246 3e Optimizes the web site for a 1024x768 pixel screen resolution.
5 34237 4d Includes the names of the people who created the documents on the index page.
5 34236 44 Includes the summary information of the documents on the index page.
5 34245 3d Optimizes the web site for a 800x600 pixel screen resolution.
5 34238 3f Includes the creation dates of the documents on the index page.
5 34240 33 Displays the format of the files on the index page.
5 34235 3b Includes the file names of the documents on the index page.
5 34241 30 Displays the file format icon on the index page.
5 34239 49 Includes the date of the last time a file was modified on the index page.
5 34242 3c Displays the number of pages in your site on the index page.
5 34243 36 Displays the file size in kilobytes on the index page.
5 34244 3d Optimizes the web site for a 640x480 pixel screen resolution.
5 34248 2d Select a Background image for the index page.
5 34249 54 Select the Icons that you want to use for the navigation elements on the index page.
5 34247 2b Select the color scheme for the index page.
5 34292 30 Clears the background image from the index page.
5 34291 4e Opens a file open dialog to select a background image file for the index page.
5 34290 36 Specifies a background image for the Web Wizard style.
5 41002 28 Clears the icon set from the index page.
5 41000 53 Select an icon set for navigation on HTML presentation documents in the Web Wizard.
5 34259 58 Enter the copyright notice for the index page. The notice is stored in an HTML meta tag.
5 34258 57 Enter the e-mail address for the index page. The address is stored in an HTML meta tag.
5 34250 5f Enter the title for the index page. This element is displayed on the title bar of web browsers.
5 34253 56 Enter a description for the index page. The description is stored in an HTML meta tag.
5 34255 53 Enter the creation date for the index page. The date is stored in an HTML meta tag.
5 34256 53 Enter the modified date for the index page. The date is stored in an HTML meta tag.
5 34271 25 Enter the name for the settings file.
5 34270 35 Saves the settings that you specified in this wizard.
5 34269 67 Opens the FTP Connection dialog where you can edit and test the connection settings for the FTP server.
5 34268 c6 Uploads your files to an FTP server. The index page is saved to the location that you specified. All other files are saved to the "myWebsite" directory in the directory that contains the index page.
5 34266 46 Opens a dialog where you can specify the location of the archive file.
5 34260 48 Opens your web page in the default web browser of your operating system.
5 34261 d9 Uploads your index page and files to a local directory. The index page is saved to the location that you specified. All other files are saved to the "myWebsite" directory in the directory that contains the index page.
5 34263 22 Opens a dialog to select a folder.
5 34265 104 Adds your index page and files to a compressed archive file and uploads the file to your web site. The index page is saved to the location that you specified. All other files are saved to the "myWebsite" directory in the directory that contains the index page.
5 41046 51 Opens a dialog where you can specify the FTP server directory to store the files.
5 41045 57 Enter the location of a directory on the FTP server where you want to store your files.
5 41044 33 Tests the FTP connection with the current settings.
5 41040 44 Edit and test the FTP server connection settings for the Web Wizard.
5 41042 3e Enter the user name that is required to access the FTP server.
5 41041 2f Enter the name or IP address of the FTP server.
5 41043 3d Enter the password that is required to access the FTP server.
1d HID_QUERY_EDIT_JOINCONNECTION 15 Edit Join Properties.
14 HID_QRYDGN_ROW_ORDER 66 If you click the cell, you can select among the sorting options: ascending, descending and not sorted.
12 HID_CTL_QRYDGNCRIT 26 Select conditions to define the query.
11 HID_CTL_QRYDGNTAB 50 Double-click fields to add them to the query. Drag-and-drop to define relations.
22 dbaccess%2Fui%2Fsavedialog%2Ftitle 2a Enter the name of the query or table view.
23 dbaccess%2Fui%2Fsavedialog%2Fschema 49 Enter the name of the schema that is assigned to the query or table view.
14 HID_QRYDGN_ROW_FIELD 7c Enter the name of the data field that you referred to in the Query. All settings made in the lower rows refer to this field.
13 HID_QRYDGN_ROW_CRIT 51 Specifies the criteria by which the content of the data field should be filtered.
16 HID_QRYDGN_ROW_VISIBLE 5a If you mark the Visible property for a data field, that field will be visible in the query
17 HID_QRYDGN_ROW_FUNCTION 8f The Parameter Input dialog asks you which variables you defined in the query. Enter a value for each query variable and confirm by clicking OK.
14 HID_QRYDGN_ROW_ALIAS 8d Specifies an alias. This alias will be listed in a query instead of the field name. This makes it possible to use user-defined column labels.
14 HID_QRYDGN_ROW_TABLE 4b The corresponding database table of the selected data field is listed here.
21 dbaccess%2Fui%2Fjoindialog%2Ftype 54 For a full join, the results table contains all fields of the left and right tables.
23 dbaccess%2Fui%2Fjoindialog%2Ftable2 35 Specifies two different tables that you want to join.
5 dummy 5a If you click More, a dialog displaying more information about the current problem appears.
26 dbaccess%2Fui%2Fpassword%2Fnewpassword 17 Enter the new password.
26 dbaccess%2Fui%2Fpassword%2Foldpassword 17 Enter the old password.
2a dbaccess%2Fui%2Fpassword%2Fconfirmpassword 1d Enter the new password again.
1c sfx%2Fui%2Fpassword%2Fusered 23 Specifies the name of the new user.
1c HID_TABLE_DESIGN_HELP_WINDOW 14 Displays help texts.
16 HID_TABDESIGN_NAMECELL 84 Specifies the name of the data field. Note the database restrictions, such as the length of the name, special characters and spaces.
19 HID_TABDESIGN_COMMENTCELL 22 Specifies an optional description.
18 HID_TABDESIGN_BACKGROUND 32 This area is where you define the table structure.
1a SID_TABLEDESIGN_INSERTROWS 96 Inserts an empty row above the current row, if the table has not been saved. Inserts an empty row at the end of the table if the table has been saved.
20 SID_TABLEDESIGN_TABED_PRIMARYKEY 4f If this command has a check mark, the data field in this line is a primary key.
16 HID_TABDESIGN_TYPECELL 19 Specifies the field type.
13 HID_TAB_ENT_DEFAULT 3c Specifies the value that is the default in new data records.
19 HID_TAB_ENT_FORMAT_SAMPLE 41 Displays the format code that you can select with the ... button.
d .uno%3ADelete 19 Deletes the selected row.
12 HID_TAB_ENT_FORMAT 2a This button opens the Field Format dialog.
31 dbaccess%2Fui%2Findexdesigndialog%2FID_INDEX_DROP 1a Deletes the current index.
2a dbaccess%2Fui%2Findexdesigndialog%2FUNIQUE 3e Specifies whether the current index allows only unique values.
2e dbaccess%2Fui%2Findexdesigndialog%2FINDEX_LIST 85 Displays the available indexes. Select an index from the list to edit. The details of the selected index are displayed in the dialog.
23 HID_DLGINDEX_INDEXDETAILS_SORTORDER 1a Determines the sort order.
30 dbaccess%2Fui%2Findexdesigndialog%2FID_INDEX_NEW 14 Creates a new index.
14 .uno%3ADBIndexDesign 4a The Index Design dialog allows you edit the indexes for the current table.
33 dbaccess%2Fui%2Findexdesigndialog%2FID_INDEX_RENAME 1a Renames the current index.
1f HID_DLGINDEX_INDEXDETAILS_FIELD 57 Displays a list of the fields in the current table. You can select more than one field.
31 dbaccess%2Fui%2Findexdesigndialog%2FID_INDEX_SAVE 2b Saves the current index in the data source.
29 dbaccess%2Fui%2Findexdesigndialog%2Fclose 12 Closes the dialog.
32 dbaccess%2Fui%2Findexdesigndialog%2FID_INDEX_RESET 50 Resets the current index to the setting that it had when the dialog was started.
13 HID_CTL_RELATIONTAB 57 Here you can link together tables from the current database through common data fields.
2b dbaccess%2Fui%2Frelationdialog%2Fdeldefault 60 If you delete the corresponding primary key, a set value will be set to all external key fields.
26 dbaccess%2Fui%2Fjoindialog%2Frelations 28 Defines the key fields for the relation.
28 dbaccess%2Fui%2Frelationdialog%2Faddnull a1 If the corresponding primary key has been modified, use this option to set the "IS NULL" value to all external key fields. IS NULL means that the field is empty.
2a dbaccess%2Fui%2Frelationdialog%2Faddaction 5a Specifies that any change made to a primary key does not affect other external key fields.
27 dbaccess%2Fui%2Frelationdialog%2Ftable2 4a The names of the tables selected for the link appear here as column names.
14 .uno%3ADBAddRelation 3c Allows you to define and edit a relation between two tables.
2b dbaccess%2Fui%2Frelationdialog%2Fdelcascade 69 Specifies that all external key fields will be deleted if you delete the corresponding primary key field.
2b dbaccess%2Fui%2Frelationdialog%2Faddcascade 77 Updates all the external key fields if the value of the corresponding primary key has been modified (Cascading Update).
2b dbaccess%2Fui%2Frelationdialog%2Fadddefault 76 If the corresponding primary key has been modified, use this option to set a default value to all external key fields.
2a dbaccess%2Fui%2Frelationdialog%2Fdelaction 63 Specifies that the deletion of a primary key will not have any effect on other external key fields.
28 dbaccess%2Fui%2Frelationdialog%2Fdelnull 6d If you delete the corresponding primary key, the "IS NULL" value will be assigned to all external key fields.
27 dbaccess%2Fui%2Fcopytablepage%2Fkeyname 46 Specifies a name for the primary key generated. This name is optional.
24 dbaccess%2Fui%2Fcopytablepage%2Fdata 74 If the data cannot be attached, you will see a list of fields in the Column Info dialog whose data cannot be copied.
27 dbaccess%2Fui%2Fcopytablepage%2Fdefdata 29 Creates a 1:1 copy of the database table.
23 dbaccess%2Fui%2Fcopytablepage%2Fdef 40 Copies only the table definition and not the corresponding data.
2a dbaccess%2Fui%2Fcopytablepage%2Fprimarykey 4a Automatically generates a primary key data field and fills it with values.
24 dbaccess%2Fui%2Fcopytablepage%2Fname 1e Specifies a name for the copy.
24 dbaccess%2Fui%2Fcopytablepage%2Fview b4 If the database supports Views, you can select this option only when a query is copied in a table container. This option enables you to see and edit a query as a normal table view.
24 dbaccess%2Fui%2Fapplycolpage%2Fcolrh 5a Adds or removes the selected field (> or < button) or all of the fields (<< or >> button).
21 dbaccess%2Fui%2Fapplycolpage%2Fto 3e Lists the fields that you want to include in the copied table.
23 dbaccess%2Fui%2Fapplycolpage%2Ffrom bc Lists the available data fields that you can include in the copied table. To copy a data field, click its name, and then click the > button. To copy all of the fields, click the >> button.
2b dbaccess%2Fui%2Ftypeselectpage%2Fautobutton 23 Enables automatic type recognition.
25 dbaccess%2Fui%2Ftypeselectpage%2Fauto 40 Enter the number of lines to use for automatic type recognition.
18 HID_TAB_ENT_BOOL_DEFAULT 2c Select the default value for a Yes/No field.
11 HID_TAB_ENT_SCALE 7a Enter the number of decimal places for the data field. This option is only available for numerical or decimal data fields.
2c dbaccess%2Fui%2Ftypeselectpage%2Fcolumnnames 43 Lists the data fields that will be included in to the copied table.
16 HID_TAB_ENT_COLUMNNAME 54 Displays the name of the selected data field. If you want, you can enter a new name.
10 HID_TAB_ENT_TYPE 14 Select a field type.
f HID_TAB_ENT_LEN 32 Enter the number of characters for the data field.
27 dbaccess%2Fui%2Fnamematchingpage%2Fnone 2a Clears all of the check boxes in the list.
27 dbaccess%2Fui%2Fnamematchingpage%2Fleft 168 Lists the data fields in the source table. To include a data field from the source table in the destination table, select the check box in front of the data field name. To map the contents of a data field in the source table to a different data field in the destination table, click the data field in the source table list, and then click the up or down arrow.
26 dbaccess%2Fui%2Fnamematchingpage%2Fall 2b Selects all of the data fields in the list.
2b dbaccess%2Fui%2Fnamematchingpage%2Fup_right 35 Moves the selected entry up one position in the list.
28 dbaccess%2Fui%2Fnamematchingpage%2Fright a0 Lists the possible data fields in the destination table. Only the data fields that are selected in the source table list will be included the destination table.
2d dbaccess%2Fui%2Fnamematchingpage%2Fdown_right 37 Moves the selected entry down one position in the list.
16 HID_DSADMIN_USECATALOG b2 Uses the current data source of the Catalog. This is useful when the ODBC data source is a database server. If the ODBC data source is a dBASE driver, leave this check box clear.
2e dbaccess%2Fui%2Fspecialsettingspage%2Fusesql92 89 Only allows names that use characters that conform to the SQL92 naming constraints in the data source. All other characters are rejected.
2b dbaccess%2Fui%2Fgeneratedvaluespage%2Fquery 63 Enter an SQL statement that returns the last auto-incremented value for the primary key data field.
22 dbaccess%2Fui%2Fodbcpage%2Foptions 56 Use this text field to enter additional optional driver settings if this is necessary.
18 HID_DSADMIN_CHARSET_ODBC 79 Select the code conversion that you want to use to view the database in $[officename]. This does not affect the database.
2f dbaccess%2Fui%2Fgeneratedvaluespage%2Fstatement 70 Enter the SQL command specifier that instructs the data source to auto-increment a specified Integer data field.
32 dbaccess%2Fui%2Fgeneratedvaluespage%2Fautoretrieve 67 Enables $[officename] support of auto-incremented data fields for the current ODBC or JDBC data source.
2a dbaccess%2Fui%2Fdbasepage%2FindiciesButton 61 Opens the Indexes dialog, where you can organize the table indexes in the current dBASE database.
32 dbaccess%2Fui%2Fdbasepage%2FshowDelRowsCheckbutton 7f Displays all the records in a file, including those marked as deleted. If you select this check box, you cannot delete records.
29 dbaccess%2Fui%2Fdbaseindexdialog%2Fremove 3a Moves the selected table indexes to the Free Indexes list.
29 dbaccess%2Fui%2Fdbaseindexdialog%2Faddall 38 Moves all of the free indexes to the Table Indexes list.
26 dbaccess%2Fui%2Fdbaseindexdialog%2Fadd 33 Moves the selected index to the Table Indexes list.
2c dbaccess%2Fui%2Fdbaseindexdialog%2Fremoveall 38 Moves all of the table indexes to the Free Indexes list.
33 dbaccess%2Fui%2Fdbaseindexdialog%2FDBaseIndexDialog 29 Lets you organize dBASE database indexes.
2d dbaccess%2Fui%2Fdbaseindexdialog%2Ftableindex 3a Lists the current indexes for the selected database table.
28 dbaccess%2Fui%2Fdbaseindexdialog%2Ftable 31 Select the database table that you want to index.
2c dbaccess%2Fui%2Fdbaseindexdialog%2Ffreeindex 3b Lists the available indexes that you can assign to a table.
29 dbaccess%2Fui%2Fdirectsqldialog%2Fexecute 40 Runs the command that you entered in the Command to execute box.
31 dbaccess%2Fui%2Fdirectsqldialog%2FDirectSQLDialog 4f Opens a dialog where you can enter an SQL command for administering a database.
25 dbaccess%2Fui%2Fdirectsqldialog%2Fsql 3a Enter the SQL administration command that you want to run.
2c dbaccess%2Fui%2Fdirectsqldialog%2Fsqlhistory 6a Lists the previously executed SQL commands. To run a command again, click the command, and then click Run.
28 dbaccess%2Fui%2Fdirectsqldialog%2Fstatus 48 Displays the results, including errors, of the SQL command that you ran.
1e HID_DSADMIN_SUPPRESS_VERSIONCL 5b Sorts the list of table names in ascending order starting at the beginning of the alphabet.
27 DBACCESS_HID_DSADMIN_SUPPRESS_VERSIONCL ed Some databases track changes to each record by assigning version number to fields that are changed. This number is incremented by 1 each time the field is changed. Displays the internal version number of the record in the database table.
25 dbaccess%2Fui%2Fuseradminpage%2Ftable 4c Displays and lets you edit the database access rights for the selected user.
24 dbaccess%2Fui%2Fuseradminpage%2Fuser 32 Select the user whose settings you want to modify.
23 dbaccess%2Fui%2Fuseradminpage%2Fadd 34 Adds a new user for accessing the selected database.
2a dbaccess%2Fui%2Fuseradminpage%2Fchangepass 3d Changes the current user password for accessing the database.
26 dbaccess%2Fui%2Fuseradminpage%2Fdelete 1a Removes the selected user.
33 DBACCESS_PUSHBUTTON_TAB_PAG_ADABAS_SETTINGS_PB_STAT 5e Opens the Database Statistics dialog, where you can view statistics about the Adabas database.
33 DBACCESS_CHECKBOX_TAB_PAG_ADABAS_SETTINGS_CB_SHUTDB 3d Exits the Adabas database server when you exit $[officename].
3b DBACCESS_NUMERICFIELD_TAB_PAG_ADABAS_SETTINGS_NF_CACHE_SIZE 33 Enter the size of the data buffer for the database.
3f DBACCESS_NUMERICFIELD_TAB_PAG_ADABAS_SETTINGS_NF_DATA_INCREMENT 6f Enter the size by which you want to automatically increment the database. The maximum increment size is 100 MB.
35 DBACCESS_EDIT_TAB_PAG_ADABAS_SETTINGS_ET_CTRLUSERNAME 69 Enter the name of a user that you want to give limited control to modify some parameters of the database.
35 DBACCESS_EDIT_TAB_PAG_ADABAS_SETTINGS_ET_CTRLPASSWORD 27 Enter the password of the Control User.
33 DBACCESS_NUMERICFIELD_DLG_ADABASSTAT_ET_MEMORYUSING 42 Displays the amount of used space in the database as a percentage.
28 DBACCESS_EDIT_DLG_ADABASSTAT_ET_FREESIZE 53 Displays the amount of free space (in megabytes) that is available in the database.
2b DBACCESS_EDIT_DLG_ADABASSTAT_ET_SYSDEVSPACE 37 Displays the path and the name of the SYSDEVSPACE file.
2b DBACCESS_LISTBOX_DLG_ADABASSTAT_LB_DATADEVS 38 Displays the path and the name of the DATADEVSPACE file.
2e DBACCESS_EDIT_DLG_ADABASSTAT_ET_TRANSACTIONLOG 3a Displays the path and the name of the TRANSACTIONLOG file.
24 DBACCESS_EDIT_DLG_ADABASSTAT_ET_SIZE 36 Displays the full size (in megabytes) of the database.
20 HID_DLG_ADABAS_DATADEVSPACE_SIZE 4d Enter the size of the database in megabytes here. The maximum size is 100 MB.
15 HID_DLG_ADABAS_DBNAME 1e Type the name of the database.
1d HID_DLG_ADABAS_TRANSACTIONLOG 2c Enter the path for the transaction log file.
12 HID_DLG_ADABAS_USR a1 Enter the name of the domain user that is used by Adabas internally. Normally, the default settings for the name and password of the domain user are not changed.
15 HID_DLG_ADABAS_CONUSR cb Enter the name of a user that you want to give limited control to modify some parameters of the database. Normally, the default settings for the name and the password of the control user are not changed.
15 HID_DLG_ADABAS_SYSUSR 2d Enter the name of the database administrator.
19 HID_DLG_ADABAS_CACHE_SIZE 2e Enter the size of the data cache in megabytes.
18 HID_DLG_ADABAS_DOMAINPWD 11 Enter a password.
1b HID_DLG_ADABAS_DATADEVSPACE 25 Enter the path for the data DEVSPACE.
1a HID_DLG_ADABAS_SYSDEVSPACE 27 Enter the path for the system DEVSPACE.
1d HID_DLG_ADABAS_PBDATADEVSPACE 48 Locate the directory where you want to save the file, and then click OK.
22 HID_DLG_ADABAS_TRANSACTIONLOG_SIZE 34 Enter the size of the transaction file in megabytes.
35 dbaccess%2Fui%2Fspecialsettingspage%2Fuseodbcliterals 35 Use date/time literals that conform to ODBC standard.
31 dbaccess%2Fui%2Fspecialsettingspage%2Finputchecks d8 When you enter a new record or update an existing record in a form, and you leave a field empty which is bound to a database column which requires input, then you will see a message complaining about the empty field.
26 DBACCESS_HID_DSADMIN_BOOLEANCOMPARISON 3b Select the type of Boolean comparison that you want to use.
2b dbaccess%2Fui%2Fspecialsettingspage%2Fuseoj 5c Use escape sequences for outer joins. The syntax for this escape sequence is {oj outer-join}
34 dbaccess%2Fui%2Fspecialsettingspage%2Fignorecurrency a9 Only for Oracle JDBC connections. When enabled it specifies that no column is treated as a currency field. The field type returned from the database driver is discarded.
2b dbaccess%2Fui%2Fspecialsettingspage%2Fuseas 9b Some databases use the keyword "AS" between a name and its alias, while other databases use a whitespace. Enable this option to insert AS before the alias.
29 dbaccess%2Fui%2Fspecialsettingspage%2Feol 6d Select to use the CR + LF code pair to end every text line (preferred for DOS and Windows operating systems).
2c dbaccess%2Fui%2Fspecialsettingspage%2Fappend 39 Appends the alias to the table name in SELECT statements.
31 dbaccess%2Fui%2Fspecialsettingspage%2Fignoreprivs 43 Ignores access privileges that are provided by the database driver.
33 dbaccess%2Fui%2Fspecialsettingspage%2Fuseschemaname 37 Allows you to use the schema name in SELECT statements.
34 dbaccess%2Fui%2Fspecialsettingspage%2Fusecatalogname b7 Uses the current data source of the catalog. This option is useful when the ODBC data source is a database server. Do not select this option if the ODBC data source is a dBASE driver.
31 dbaccess%2Fui%2Fspecialsettingspage%2Fprimarykeys 5f Enable to overrule Base's heuristics used to detect whether the database supports primary keys.
33 dbaccess%2Fui%2Fspecialsettingspage%2Freplaceparams 44 Replaces named parameters in a data source with a question mark (?).
30 dbaccess%2Fui%2Fspecialsettingspage%2Fdisplayver 49 Displays the internal version number of the record in the database table.
31 dbaccess%2Fui%2Fspecialsettingspage%2Fcreateindex 2d Creates an index with ASC or DESC statements.
1c DBACCESS_HID_DSADMIN_CHARSET 54 Select the character set that you want to use to view the database in $[officename].
24 DBACCESS_HID_DSADMIN_SPECIAL_MESSAGE 38 Select the type of database that you want to connect to.
31 DBACCESS_HID_PAGE_DBWIZARD_JDBC_PB_TESTMYSQLCLASS 3c Tests the database connection through the JDBC driver class.
2d DBACCESS_HID_PAGE_DBWIZARD_JDBC_ET_MYSQLCLASS 49 Enter the name of the JDBC driver class that connects to the data source.
2e DBACCESS_HID_PAGE_DBWIZARD_JDBC_ET_MYSQLDBNAME 1f Enter the name of the database.
30 dbaccess%2Fui%2Fconnectionpage%2FpassCheckbutton 61 If checked, the user will be asked to enter the password that is required to access the database.
1f DBACCESS_HID_DSADMIN_DBASE_PATH 3e Enter the path to the directory that contains the dBASE files.
1e DBACCESS_HID_DSADMIN_FLAT_PATH 2f Enter the path to the folder of the text files.
31 dbaccess%2Fui%2Fconnectionpage%2FconnectionButton 38 Tests the database connection with the current settings.
1e DBACCESS_HID_DSADMIN_CALC_PATH 4e Enter the path to the spreadsheet document that you want to use as a database.
20 DBACCESS_HID_DLG_DATABASE_WIZARD 57 The Database Wizard creates a database file that contains information about a database.
39 DBACCESS_HID_PAGE_DBWIZARD_GENERAL_RB_GETEXISTINGDATABASE 49 Select to create a database document for an existing database connection.
1b DBACCESS_HID_DSADMIN_DSTYPE 3e Select the database type for the existing database connection.
36 DBACCESS_HID_PAGE_DBWIZARD_GENERAL_RB_CREATEDBDATABASE 20 Select to create a new database.
3a dbaccess%3ARadioButton%3APAGE_GENERAL%3ARB_OPENEXISTINGDOC 62 Select to open a database file from a list of recently used files or from a file selection dialog.
33 dbaccess%3AListBox%3APAGE_GENERAL%3ALB_DOCUMENTLIST 86 Select a database file to open from the list of recently used files. Click Finish to open the file immediately and to exit the wizard.
36 dbaccess%3APushButton%3APAGE_GENERAL%3APB_OPENDOCUMENT a6 Opens a file selection dialog where you can select a database file. Click Open or OK in the file selection dialog to open the file immediately and to exit the wizard.
2b dbaccess%2Fui%2Ffinalpagewizard%2Fusewizard 46 Select to call the Table Wizard after the Database Wizard is finished.
2d dbaccess%2Fui%2Ffinalpagewizard%2Fyesregister 11e Select to register the database within your user copy of %PRODUCTNAME. After registering, the database is displayed in the View - Data Sources window. You must register a database to be able to insert the database fields in a document (Insert - Fields - More Fields) or in a mail merge.
2b dbaccess%2Fui%2Ffinalpagewizard%2FPageFinal 6a Specifies whether you want to register the database, open the database for editing, or insert a new table.
2d dbaccess%2Fui%2Ffinalpagewizard%2Fopenediting 4f Select to display the database file, where you can edit the database structure.
2c dbaccess%2Fui%2Ffinalpagewizard%2Fnoregister 4e Select to keep the database information only within the created database file.
37 DBACCESS_HID_PAGE_DBWIZARD_MSACCESS_PB_MSACCESSLOCATION 26 Click to open a file selection dialog.
37 DBACCESS_HID_PAGE_DBWIZARD_MSACCESS_ET_MSACCESSLOCATION 28 Specifies the path to the database file.
2f DBACCESS_HID_PAGE_DBWIZARD_ADABAS_PB_ADABASNAME 26 Click to open a file selection dialog.
2f DBACCESS_HID_PAGE_DBWIZARD_ADABAS_ET_ADABASNAME 24 Enter the name of the database file.
3b dbaccess%2Fui%2Fauthentificationpage%2FgeneralUserNameEntry 30 A user name can have a maximum of 18 characters.
28 DBACCESS_HID_PAGE_DBWIZARD_ADO_PB_ADOURL 2a Click to open a database selection dialog.
3e dbaccess%2Fui%2Fauthentificationpage%2FpassRequiredCheckbutton 2b A password must contain 3 to 18 characters.
28 DBACCESS_HID_PAGE_DBWIZARD_ADO_ET_ADOURL 1a Enter the data source URL.
31 DBACCESS_HID_PAGE_DBWIZARD_DBASE_PB_DBASELOCATION 1d Open a path selection dialog.
31 DBACCESS_HID_PAGE_DBWIZARD_DBASE_ET_DBASELOCATION 28 Enter the path to the dBASE *.dbf files.
30 dbaccess%2Fui%2Fconnectionpage%2FjavaDriverLabel 22 Enter the name of the JDBC driver.
1c HID_DSADMIN_CONNURL_JDBCPAGE df Enter the URL for the database. For example, for the MySQL JDBC driver, enter "jdbc:mysql://<Servername>/<name of the database>". For more information on the JDBC driver, consult the documentation that came with the driver.
32 DBACCESS_HID_PAGE_DBWIZARD_JDBC_ET_MYSQLHOSTSERVER 41 hostname is the name of the machine that runs the MySQL database.
17 HID_DSADMIN_USESSL_LDAP 56 Creates a secure connection to the LDAP server through the Secure Sockets Layer (SSL).
17 HID_DSADMIN_LDAP_BASEDN 4c Enter the starting point to search the LDAP database, for example, "dc=com".
1b HID_DSADMIN_LDAP_PORTNUMBER 30 Enter the port of the LDAP server, normally 389.
19 HID_DSADMIN_LDAP_HOSTNAME 45 Enter the name of the LDAP server using the format "ldap.server.com".
2a dbaccess%2Fui%2Fdbwizmysqlintropage%2Fjdbc 48 Connects to an existing JDBC data source that was set on a system level.
2a dbaccess%2Fui%2Fdbwizmysqlintropage%2Fodbc 48 Connects to an existing ODBC data source that was set on a system level.
37 DBACCESS_HID_PAGE_DBWIZARD_ODBC_PB_NAMEOFODBCDATASOURCE 33 Click to open an ODBC data source selection dialog:
37 DBACCESS_HID_PAGE_DBWIZARD_ODBC_ET_NAMEOFODBCDATASOURCE 24 Enter the path to the database file.
30 dbaccess%2Fui%2Fconnectionpage%2FjavaDriverLabel 22 Enter the name of the JDBC driver.
2f DBACCESS_HID_PAGE_DBWIZARD_ORACLE_ET_ORACLEPORT 2e Enter the port number for the database server.
30 DBACCESS_HID_PAGE_DBWIZARD_ORACLE_ET_ORACLECLASS 26 Enter the URL for the database server.
35 DBACCESS_HID_PAGE_DBWIZARD_ORACLE_ET_ORACLEHOSTSERVER 26 Enter the name of the Oracle database.
37 dbaccess%2Fui%2Fdbwizspreadsheetpage%2Fpasswordrequired 44 Select to request a password from the user of the database document.
39 DBACCESS_HID_PAGE_DBWIZARD_SPREADSHEET_PB_SPREADSHEETPATH 26 Click to open a file selection dialog.
39 DBACCESS_HID_PAGE_DBWIZARD_SPREADSHEET_ET_SPREADSHEETPATH 35 Enter the path and file name to the spreadsheet file.
2f DBACCESS_HID_PAGE_DBWIZARD_TEXT_ET_OWNEXTENSION 42 Click to access custom files. Enter the extension in the text box.
33 DBACCESS_HID_PAGE_DBWIZARD_TEXT_RB_ACCESSOTHERFILES 42 Click to access custom files. Enter the extension in the text box.
33 DBACCESS_HID_PAGE_DBWIZARD_TEXT_ET_LOCATIONTEXTFILE fd Enter the path to the text file or files. If you just want one text file, you can use any extension of the file name. If you enter a folder name, the text files in that folder must have the extension *.csv to be recognized as files of the text database.
31 DBACCESS_HID_PAGE_DBWIZARD_TEXT_RB_ACCESSTXTFILES 1a Click to access txt files.
1f HID_DSADMIN_THOUSANDS_SEPARATOR 87 Enter or select the character that is used as a thousands separator in the text file, for example a comma (1,000), or a period (1.000).
1a HID_DSADMIN_TEXT_SEPARATOR 4c Enter or select the character that identifies a text field in the text file.
1b HID_DSADMIN_FIELD_SEPARATOR 4a Enter or select the character that separates data fields in the text file.
31 DBACCESS_HID_PAGE_DBWIZARD_TEXT_RB_ACCESSCSVFILES 1a Click to access csv files.
1d HID_DSADMIN_DECIMAL_SEPARATOR 81 Enter or select the character that is used as a decimal separator in the text file, for example, a period (0.5) or a comma (0,5).
33 DBACCESS_HID_PAGE_DBWIZARD_TEXT_PB_LOCATIONTEXTFILE 26 Click to open a file selection dialog.
1b .uno%3ADBDSAdvancedSettings 25 Opens the Advanced Properties dialog.
19 .uno%3ADBDSConnectionType 21 Opens the Connection Type Wizard.
f .uno%3ADBRename 71 Renames the selected object. Depending on the database, some names, characters, and name length might be invalid.
18 HID_BROWSER_TABLE_DELETE 33 Deletes the selected table, query, form, or report.
1f .uno%3ADBDatabasePropertiesMenu 10 Opens a submenu.
d .uno%3ADBEdit 4d Opens a window where you can edit the selected table, query, form, or report.
1f DBACCESS_HID_BROWSER_TABLE_EDIT 4d Opens a window where you can edit the selected table, query, form, or report.
d .uno%3ADBOpen 32 Opens the selected object in the last saved state.
29 .uno%3ADBNewFormAutoPilotWithPreSelection 3e Starts the Form Wizard for the selected table, query, or view.
2b .uno%3ADBNewReportAutoPilotWithPreSelection 40 Starts the Report Wizard for the selected table, query, or view.
16 .uno%3ADBConvertToView cf Converts the selected query to a view. The original query remains in your database file and an additional view is generated on the database server. You must have write permission to add a view to a database.
15 .uno%3ADBDSProperties 25 Opens the Database Properties dialog.
1b .uno%3ADBSendReportToWriter 86 Exports the selected report to a text document. A dynamic report is exported as a copy of the database contents at the time of export.
19 .uno%3ADBSendReportAsMail fe Opens the default e-mail application to send a new e-mail. The selected report is appended as an attachment. You can enter the subject, the recipients and a mail body. A dynamic report is exported as a copy of the database contents at the time of export.
29 dbaccess%2Fui%2Fcollectionviewdialog%2Fok 2c Click to save the form to the database file.
35 dbaccess%2Fui%2Fcollectionviewdialog%2FCollectionView 36 Click to create a new folder within the database file.
36 dbaccess%2Fui%2Fcollectionviewdialog%2FnewFolderButton 36 Click to create a new folder within the database file.
2f dbaccess%2Fui%2Fcollectionviewdialog%2FupButton 31 Click to go up one level in the folder hierarchy.
34 dbaccess%2Fui%2Fcollectionviewdialog%2FfileNameEntry 27 Enter the file name for the saved form.
12 .uno%3ADBNewFolder 44 Opens a dialog where you can save a new folder in the database file.
13 .uno%3ADBNewViewSQL 1d Opens a new view in SQL mode.
10 .uno%3ADBNewView 20 Opens a new view in design mode.
28 DBACCESS_HID_BROWSER_TABLE_CREATE_DESIGN 1c Opens the table design view.
10 .uno%3ADBNewForm 27 Opens a new text document in form mode.
11 .uno%3ADBNewTable 1c Opens the table design view.
12 .uno%3ADBNewReport 48 Starts the Report Builder window for the selected table, view, or query.
14 .uno%3ADBNewQuerySql 1e Opens a new query in SQL mode.
11 .uno%3ADBNewQuery 21 Opens a new query in design mode.
12 .uno%3ADBDirectSQL 38 Opens the SQL dialog where you can enter SQL statements.
33 dbaccess%2Fui%2Ftablesfilterpage%2FTablesFilterPage 64 Opens the Table Filter dialog where you can specify which tables of the database to show or to hide.
12 .uno%3ADBUserAdmin 4b Opens the User Administration dialog if the database supports this feature.
17 .uno%3ADBRelationDesign 5d Opens the Relation Design view and checks whether the database connection supports relations.
16 .uno%3ADBRefreshTables 15 Refreshes the tables.
14 .uno%3ADBViewQueries 47 Selects the queries container and shows all queries in the detail view.
17 .uno%3ADBDisablePreview 2c Disables the preview in the database window.
14 .uno%3ADBViewReports 47 Selects the reports container and shows all reports in the detail view.
1b .uno%3ADBShowDocInfoPreview 49 The preview window displays the document information of a form or report.
12 .uno%3ADBViewForms 43 Selects the forms container and shows all forms in the detail view.
1c .uno%3ADBDatabaseObjectsMenu 10 Opens a submenu.
13 .uno%3ADBViewTables 45 Selects the tables container and shows all tables in the detail view.
10 .uno%3ADBPreview 10 Opens a submenu.
d .uno%3ADBSort 10 Opens a submenu.
17 .uno%3ADBShowDocPreview 36 The preview displays the document of a form or report.
26 dbaccess%2Fui%2Fsummarypage%2Ftextview 42 The list shows all changes that were applied to the database file.
23 dbaccess%2Fui%2Fbackuppage%2Fbrowse c1 Choose a location and file name to save the new database file. By default, the new file gets the same name as the old file, while the old file gets renamed with the string "backup" in the name.
17 .uno%3ADBMigrateScripts 96 The Database Document Macro Migration Wizard moves existing macros from sub-documents of an old Base file into the new Base file's macro storage area.
29 dbaccess%2Fui%2Fprepagepage%2FPreparePage 96 The Database Document Macro Migration Wizard moves existing macros from sub-documents of an old Base file into the new Base file's macro storage area.
29 dbaccess%2Fui%2Fmigratepage%2FMigratePage 96 The Database Document Macro Migration Wizard moves existing macros from sub-documents of an old Base file into the new Base file's macro storage area.
29 dbaccess%2Fui%2Fsummarypage%2FSummaryPage 96 The Database Document Macro Migration Wizard moves existing macros from sub-documents of an old Base file into the new Base file's macro storage area.
27 dbaccess%2Fui%2Fbackuppage%2FBackupPage 96 The Database Document Macro Migration Wizard moves existing macros from sub-documents of an old Base file into the new Base file's macro storage area.
36 svtools%3ACheckBox%3ADLG_LOGIN%3ACB_LOGIN_SAVEPASSWORD 99 Select to use the same user name and password without further dialog, when you connect again to the same data source in the current %PRODUCTNAME session.
2e svtools%3AEdit%3ADLG_LOGIN%3AED_LOGIN_PASSWORD 31 Enter the password to connect to the data source.
2e svtools%3AEdit%3ADLG_LOGIN%3AED_LOGIN_USERNAME 32 Enter the user name to connect to the data source.
17 WIZARDS_HID_QUERYWIZARD 36 The Query Wizard helps you to design a database query.
24 WIZARDS_HID_QUERYWIZARD_LSTSELFIELDS 3b Displays all fields that will be included in the new query.
21 WIZARDS_HID_QUERYWIZARD_LSTTABLES 39 Specifies the table for which the query is to be created.
1d WIZARDS_HID_QUERYWIZARD_SORT4 64 Specifies additional fields by which the created query is sorted, if previous sort fields are equal.
22 WIZARDS_HID_QUERYWIZARD_OPTASCEND2 3f Click to sort in alphabetically or numerically ascending order.
22 WIZARDS_HID_QUERYWIZARD_OPTASCEND3 3f Click to sort in alphabetically or numerically ascending order.
1d WIZARDS_HID_QUERYWIZARD_SORT3 64 Specifies additional fields by which the created query is sorted, if previous sort fields are equal.
22 WIZARDS_HID_QUERYWIZARD_OPTASCEND4 3f Click to sort in alphabetically or numerically ascending order.
22 WIZARDS_HID_QUERYWIZARD_OPTASCEND1 3f Click to sort in alphabetically or numerically ascending order.
1d WIZARDS_HID_QUERYWIZARD_SORT1 39 Specifies the field by which the created query is sorted.
1d WIZARDS_HID_QUERYWIZARD_SORT2 64 Specifies additional fields by which the created query is sorted, if previous sort fields are equal.
23 WIZARDS_HID_QUERYWIZARD_OPTDESCEND2 40 Click to sort in alphabetically or numerically descending order.
23 WIZARDS_HID_QUERYWIZARD_OPTDESCEND3 40 Click to sort in alphabetically or numerically descending order.
23 WIZARDS_HID_QUERYWIZARD_OPTDESCEND1 40 Click to sort in alphabetically or numerically descending order.
23 WIZARDS_HID_QUERYWIZARD_OPTDESCEND4 40 Click to sort in alphabetically or numerically descending order.
26 WIZARDS_HID_QUERYWIZARD_LSTFIELDNAME_2 2f Select the field name for the filter condition.
26 WIZARDS_HID_QUERYWIZARD_LSTFIELDNAME_3 2f Select the field name for the filter condition.
23 WIZARDS_HID_QUERYWIZARD_OPTMATCHANY 47 Select to filter the query by any of the conditions using a logical OR.
23 WIZARDS_HID_QUERYWIZARD_OPTMATCHALL 45 Select to filter the query by all the conditions using a logical AND.
26 WIZARDS_HID_QUERYWIZARD_LSTFIELDNAME_1 2f Select the field name for the filter condition.
25 WIZARDS_HID_QUERYWIZARD_LSTOPERATOR_1 24 Select the condition for the filter.
25 WIZARDS_HID_QUERYWIZARD_LSTOPERATOR_2 24 Select the condition for the filter.
25 WIZARDS_HID_QUERYWIZARD_LSTOPERATOR_3 24 Select the condition for the filter.
22 WIZARDS_HID_QUERYWIZARD_TXTVALUE_3 29 Enter the value for the filter condition.
22 WIZARDS_HID_QUERYWIZARD_TXTVALUE_1 29 Enter the value for the filter condition.
22 WIZARDS_HID_QUERYWIZARD_TXTVALUE_2 29 Enter the value for the filter condition.
29 WIZARDS_HID_QUERYWIZARD_BTNAGGREGATEMINUS 21 Removes the last row of controls.
28 WIZARDS_HID_QUERYWIZARD_BTNAGGREGATEPLUS 1e Appends a new row of controls.
2f WIZARDS_HID_QUERYWIZARD_OPTAGGREGATEDETAILQUERY 28 Select to show all records of the query.
30 WIZARDS_HID_QUERYWIZARD_OPTAGGREGATESUMMARYQUERY 33 Select to show only results of aggregate functions.
2e WIZARDS_HID_QUERYWIZARD_LSTAGGREGATEFUNCTION_1 1e Select the aggregate function.
2c WIZARDS_HID_QUERYWIZARD_LSTAGGREGATEFIELDS_1 1e Select the numeric field name.
2a WIZARDS_HID_QUERYWIZARD_LSTFILTERSELFIELDS 3b Displays all fields that are to be used to group the query.
2c WIZARDS_HID_QUERYWIZARD_LSTFILTERFIELDNAME_2 31 Select the field name for the grouping condition.
2c WIZARDS_HID_QUERYWIZARD_LSTFILTERFIELDNAME_1 31 Select the field name for the grouping condition.
2c WIZARDS_HID_QUERYWIZARD_LSTFILTERFIELDNAME_3 31 Select the field name for the grouping condition.
28 WIZARDS_HID_QUERYWIZARD_TXTFILTERVALUE_3 2b Enter the value for the grouping condition.
28 WIZARDS_HID_QUERYWIZARD_OPTGROUPMATCHANY 46 Select to group the query by any of the conditions using a logical OR.
28 WIZARDS_HID_QUERYWIZARD_OPTGROUPMATCHALL 44 Select to group the query by all the conditions using a logical AND.
2b WIZARDS_HID_QUERYWIZARD_LSTFILTEROPERATOR_1 26 Select the condition for the grouping.
2b WIZARDS_HID_QUERYWIZARD_LSTFILTEROPERATOR_2 26 Select the condition for the grouping.
2b WIZARDS_HID_QUERYWIZARD_LSTFILTEROPERATOR_3 26 Select the condition for the grouping.
28 WIZARDS_HID_QUERYWIZARD_TXTFILTERVALUE_1 2b Enter the value for the grouping condition.
28 WIZARDS_HID_QUERYWIZARD_TXTFILTERVALUE_2 2b Enter the value for the grouping condition.
22 WIZARDS_HID_QUERYWIZARD_TXTTITLE_1 23 Enter the alias for the field name.
22 WIZARDS_HID_QUERYWIZARD_TXTSUMMARY 20 Displays a summary of the query.
27 WIZARDS_HID_QUERYWIZARD_OPTDISPLAYQUERY 25 Select to save and display the query.
26 WIZARDS_HID_QUERYWIZARD_OPTMODIFYQUERY 31 Select to save the query and open it for editing.
25 WIZARDS_HID_QUERYWIZARD_TXTQUERYTITLE 1c Enter the name of the query.
2f modules%2Fdbreport%2Fui%2Fdatetimedialog%2Ftime 94 Enable Include Time to insert a time field into the active area of the report. The time field displays the current time when the report is executed.
2f modules%2Fdbreport%2Fui%2Fdatetimedialog%2Fdate 94 Enable Include Date to insert a date field into the active area of the report. The date field displays the current date when the report is executed.
39 modules%2Fdbreport%2Fui%2Fdatetimedialog%2FDateTimeDialog 5f You can open the Date and Time dialog of the Report Builder by choosing Insert - Date and Time.
1a .uno%3AInsertDateTimeField 5f You can open the Date and Time dialog of the Report Builder by choosing Insert - Date and Time.
17 .uno%3ASectionShrinkTop 37 Shrinks the selected section to remove top empty space.
14 .uno%3ASectionShrink 42 Shrinks the selected section to remove top and bottom empty space.
16 .uno%3ASectionAlignTop 62 Select two or more objects and click this icon to align the objects at the top margin of the area.
11 .uno%3AVFixedLine 2c Inserts a vertical line to the current area.
19 .uno%3ASectionAlignBottom 65 Select two or more objects and click this icon to align the objects at the bottom margin of the area.
18 .uno%3ASectionAlignRight 64 Select two or more objects and click this icon to align the objects at the right margin of the area.
1a .uno%3ASectionShrinkBottom 3a Shrinks the selected section to remove bottom empty space.
17 .uno%3ASectionAlignLeft 63 Select two or more objects and click this icon to align the objects at the left margin of the area.
14 .uno%3ASmallestWidth 5b Select two or more objects and click this icon to resize the objects to the smallest width.
15 .uno%3ASmallestHeight 5c Select two or more objects and click this icon to resize the objects to the smallest height.
14 .uno%3AGreatestWidth 5b Select two or more objects and click this icon to resize the objects to the greatest width.
15 .uno%3AGreatestHeight 5c Select two or more objects and click this icon to resize the objects to the greatest height.
11 .uno%3AHFixedLine 2e Inserts a horizontal line to the current area.
28 REPORTDESIGN_HID_RPT_PROP_DEEPTRAVERSING e8 If Deep traversing is enabled, functions are evaluated considering all lower levels of hierarchy. This would be used for instance for line numbering. If Deep traversing is not enabled, only the first level of hierarchy is evaluated.
26 REPORTDESIGN_HID_RPT_PROP_PREEVALUATED 57 If Pre evaluation is enabled, functions are evaluated only when the report is finished.
28 REPORTDESIGN_HID_RPT_PROP_INITIALFORMULA 5a Enter the initial value for the evaluation of the formula. Often this is set to 0 or to 1.
16 .uno%3AReportNavigator 7f The Report Navigator reveals the structure of the report. You can use the Report Navigator to insert functions into the report.
12 .uno%3ANewFunction a9 In the context menu of the Report Navigator, you see the same commands as in the Report Builder view, plus additional commands to create new functions or to delete them.
21 REPORTDESIGN_HID_RPT_PROP_FORMULA 44 Enter the formula that defines the function. Use OpenFormula syntax.
26 REPORTDESIGN_HID_REPORT_NAVIGATOR_TREE 9f Click an entry in the Report Navigator. The corresponding object or area is selected in the Report Builder view. Right-click an entry to open the context menu.
36 modules%2Fdbreport%2Fui%2Fpagenumberdialog%2Falignment 9 Alignment
37 modules%2Fdbreport%2Fui%2Fpagenumberdialog%2Fbottompage 17 Bottom of Page (Footer)
3d modules%2Fdbreport%2Fui%2Fpagenumberdialog%2FPageNumberDialog 5d You can open the Page Numbers dialog of the Report Builder by choosing Insert - Page Numbers.
34 modules%2Fdbreport%2Fui%2Fpagenumberdialog%2Ftoppage 14 Top of Page (Header)
32 modules%2Fdbreport%2Fui%2Fpagenumberdialog%2Fpagen 6 Page N
35 modules%2Fdbreport%2Fui%2Fpagenumberdialog%2Fpagenofm b Page N of M
23 REPORTDESIGN_HID_RPT_PROP_DATAFIELD 43 On the Data tab page, you can change the data contents to be shown.
22 REPORTDESIGN_HID_RPT_PROP_RPT_FONT 2d Select the font for the selected text object.
26 REPORTDESIGN_HID_RPT_PROP_KEEPTOGETHER 78 Keep Together specifies to print the current object starting on top of a new page if it doesn't fit on the current page.
2e REPORTDESIGN_HID_RPT_PROP_PRINTWHENGROUPCHANGE 17 Print when group change
29 REPORTDESIGN_HID_RPT_PROP_BACKTRANSPARENT 51 Specifies whether the background of the selected object is transparent or opaque.
25 REPORTDESIGN_HID_RPT_PROP_PRESERVEIRI f5 For a picture, you can specify to either insert the picture as a link to a file or only as an embedded object in the Base file. The embedded option increases the size of the Base file, while the link option is not as portable to other computers.
25 REPORTDESIGN_HID_RPT_PROP_NEWROWORCOL 93 New Row Or Column specifies, for a multi-column design, whether the current section and/or the next section will be printed on a new row or column.
2a REPORTDESIGN_HID_RPT_PROP_PAGEHEADEROPTION 79 Specifies in which context the page header will be printed: on all pages, or not on pages with a report header or footer.
2b REPORTDESIGN_HID_RPT_PROP_GROUPKEEPTOGETHER 5c Groups are kept together by page or by column (default). You must enable Keep Together also.
13 .uno%3ASelectReport 5a To display the Data or General tab page for the whole report, choose Edit - Select Report.
26 REPORTDESIGN_HID_RPT_PROP_FORCENEWPAGE 66 Force New Page specifies whether the current section and/or the next section is printed on a new page.
34 REPORTDESIGN_HID_RPT_PROP_CONDITIONALPRINTEXPRESSION 5b If the Conditional Print Expression evaluates to TRUE, the selected object will be printed.
1e REPORTDESIGN_HID_RPT_FIELD_SEL c4 The Add Field window is shown automatically when you have selected a table in the Contents box and leave that box. You can also click the Add Field icon on the toolbar, or choose View - Add Field.
22 EXTENSIONS_HID_PROP_VERTICAL_ALIGN f Vert. Alignment
27 REPORTDESIGN_HID_RPT_PROP_RPT_POSITIONY 2a Set the Y Position for the selected object
2a REPORTDESIGN_HID_RPT_PROP_PAGEFOOTEROPTION 78 Specifies in which context the page footer will be printed: on all pages, or not on pages with a report header or footer
27 REPORTDESIGN_HID_RPT_PROP_RPT_POSITIONX 2a Set the X Position for the selected object
23 REPORTDESIGN_HID_RPT_PROP_BACKCOLOR 53 Sets the background color for the selected object, both on screen and for printing.
2d REPORTDESIGN_HID_RPT_PROP_PRINTREPEATEDVALUES 23 Specifies to print repeated values.
23 REPORTDESIGN_HID_RPT_PROP_RPT_WIDTH 26 Sets the width of the selected object.
21 REPORTDESIGN_HID_RPT_PROP_VISIBLE 68 An invisible object is not shown in the executed report. It is still visible in the Report Builder view.
24 REPORTDESIGN_HID_RPT_PROP_RPT_HEIGHT 2a Defines the height of the selected object.
2f modules%2Fdbreport%2Fui%2Ffloatingsort%2Fdelete 29 Removes the selected field from the list.
35 modules%2Fdbreport%2Fui%2Ffloatingsort%2FFloatingSort b2 In the Sorting and Grouping dialog of Report Builder, you can define the fields that should be sorted in your report, and the fields that should be kept together to form a group.
24 REPORTDESIGN_HID_RPT_FIELDEXPRESSION 37 Click to open a list from which you can select a field.
1b .uno%3ADbSortingAndGrouping b2 In the Sorting and Grouping dialog of Report Builder, you can define the fields that should be sorted in your report, and the fields that should be kept together to form a group.
2d modules%2Fdbreport%2Fui%2Ffloatingsort%2Fkeep 4e Select the level of detail by which a group is kept together on the same page.
2e modules%2Fdbreport%2Fui%2Ffloatingsort%2Fgroup 4b Select to create a new group on each changed value, or on other properties.
2d modules%2Fdbreport%2Fui%2Ffloatingsort%2Fdown 2a Moves the selected field down in the list.
2b modules%2Fdbreport%2Fui%2Ffloatingsort%2Fup 28 Moves the selected field up in the list.
30 modules%2Fdbreport%2Fui%2Ffloatingsort%2Fsorting 19 Select the sorting order.
31 modules%2Fdbreport%2Fui%2Ffloatingsort%2Finterval 3b Enter the group interval value that records are grouped by.
2c modules%2Fdbreport%2Fui%2Ffloatingsort%2Fbox 9f Lists the fields that will be used for sorting or grouping. The field at the top has the highest priority, the second field has the second priority, and so on.
2f modules%2Fdbreport%2Fui%2Ffloatingsort%2Fheader 28 Select to show or hide the Group Header.
2f modules%2Fdbreport%2Fui%2Ffloatingsort%2Ffooter 28 Select to show or hide the Group Footer.
1b WIZARDS_HID_DLGTABLE_DIALOG 36 The Table Wizard helps you to create a database table.
1d WIZARDS_HID_DLGTABLE_LBTABLES a2 Select one of the sample tables. Then select fields from that table from the left list box. Repeat this step until you have selected all the fields that you need.
1f WIZARDS_HID_DLGTABLE_OPTPRIVATE 3e Select the private category to see only private sample tables.
23 WIZARDS_HID_DLGTABLE_FIELDSSELECTED 3b Displays all fields that will be included in the new table.
20 WIZARDS_HID_DLGTABLE_OPTBUSINESS 40 Select the business category to see only business sample tables.
23 DBACCESS_HID_TAB_AUTOINCREMENTVALUE 70 Enter the SQL command specifier that instructs the data source to auto-increment a specified Integer data field.
1d DBACCESS_HID_TAB_ENT_REQUIRED 2c If set to Yes, this field must not be empty.
22 DBACCESS_HID_TAB_ENT_AUTOINCREMENT 53 If set to Yes, the values for this data field are generated by the database engine.
25 WIZARDS_HID_DLGTABLE_LB_SELFIELDNAMES 36 Select a field in order to edit the field information.
1d WIZARDS_HID_DLGTABLE_CMDMINUS 2c Remove the selected field from the list box.
1c WIZARDS_HID_DLGTABLE_CMDPLUS 25 Add a new data field to the list box.
1c WIZARDS_HID_DLGTABLE_COLNAME 54 Displays the name of the selected data field. If you want, you can enter a new name.
23 WIZARDS_HID_DLGTABLE_OPT_PK_SEVERAL 4d Select to create a primary key from a combination of several existing fields.
2a WIZARDS_HID_DLGTABLE_CMDREMOVE_PK_SELECTED aa Select a field and click < to remove it from the list of primary key fields. The primary key is created as a concatenation of the fields in this list, from top to bottom.
2e WIZARDS_HID_DLGTABLE_CK_PK_AUTOVALUE_AUTOMATIC b6 Select to automatically insert a value and increment the field's value for each new record. The database must support automatic incrementation in order to use the Auto value feature.
28 WIZARDS_HID_DLGTABLE_FIELDS_PK_AVAILABLE 47 Select a field and click > to add it to the list of primary key fields.
24 WIZARDS_HID_DLGTABLE_CHK_USEPRIMEKEY cd Select to create a primary key. Add a primary key to every database table to uniquely identify each record. For some database systems within %PRODUCTNAME, a primary key is mandatory for editing the tables.
24 WIZARDS_HID_DLGTABLE_CK_PK_AUTOVALUE b6 Select to automatically insert a value and increment the field's value for each new record. The database must support automatic incrementation in order to use the Auto value feature.
25 WIZARDS_HID_DLGTABLE_OPT_PK_AUTOMATIC 41 Select to automatically add a primary key as an additional field.
22 WIZARDS_HID_DLGTABLE_OPT_PK_SINGLE 44 Select to use an existing field with unique values as a primary key.
24 WIZARDS_HID_DLGTABLE_LB_PK_FIELDNAME 16 Select the field name.
28 WIZARDS_HID_DLGTABLE_OPT_STARTFORMWIZARD 83 Select to create a form based on this table. The form is created on a text document with the last used settings of the Form Wizard.
1d WIZARDS_HID_DLGTABLE_TXT_NAME 19 Specifies the table name.
20 WIZARDS_HID_DLGTABLE_LST_CATALOG 54 Select the catalog for the table. (Available only if the database supports catalogs)
26 WIZARDS_HID_DLGTABLE_OPT_WORKWITHTABLE 29 Select to save and edit the table design.
24 WIZARDS_HID_DLGTABLE_OPT_MODIFYTABLE 41 Select to save the table design and open the table to enter data.
1f WIZARDS_HID_DLGTABLE_LST_SCHEMA 52 Select the schema for the table. (Available only if the database supports schemas)
15 .uno%3ADBReportRename 1c Renames the selected report.
15 .uno%3ADBReportDelete 1c Deletes the selected report.
13 .uno%3ADBReportEdit 37 Opens the selected report so you can change the layout.
13 .uno%3ADBFormDelete 1a Deletes the selected form.
12 .uno%3ADBTableOpen 43 Opens the selected table so you can enter, edit, or delete records.
14 .uno%3ADBTableDelete 1b Deletes the selected table.
13 .uno%3ADBFormRename 1a Renames the selected form.
14 .uno%3ADBQueryRename 1b Renames the selected query.
13 .uno%3ADBReportOpen 44 Opens the selected report so you can enter, edit, or delete records.
12 .uno%3ADBTableEdit 39 Opens the selected table so you can change the structure.
12 .uno%3ADBQueryOpen 43 Opens the selected query so you can enter, edit, or delete records.
14 .uno%3ADBTableRename 1b Renames the selected table.
14 .uno%3ADBQueryDelete 1b Deletes the selected query.
11 .uno%3ADBFormOpen 42 Opens the selected form so you can enter, edit, or delete records.
12 .uno%3ADBQueryEdit 39 Opens the selected query so you can change the structure.
11 .uno%3ADBFormEdit 35 Opens the selected form so you can change the layout.
19 .uno%3AFontworkShapeTypes 64 Opens the Fontwork Shape toolbar. Click a shape to apply the shape to all selected Fontwork objects.
20 .uno%3AFontworkSameLetterHeights 6b Switches the letter height of the selected Fontwork objects from normal to the same height for all objects.
c FontWork2TBO 2b Enter the Fontwork character spacing value.
c FontWork1TBO 3e Click to apply the alignment to the selected Fontwork objects.
26 .uno%3AFontworkCharacterSpacingFloater 2c Opens the Fontwork Character Spacing window.
1f .uno%3AFontworkAlignmentFloater 24 Opens the Fontwork Alignment window.
32 modules%2Fscalc%2Fui%2Fconflictsdialog%2Fkeepother 36 Keeps the change of the other user, voids your change.
36 modules%2Fscalc%2Fui%2Fconflictsdialog%2Fkeepallothers 39 Keeps the changes of all other users, voids your changes.
31 modules%2Fscalc%2Fui%2Fconflictsdialog%2Fkeepmine 2a Keeps your change, voids the other change.
34 modules%2Fscalc%2Fui%2Fconflictsdialog%2Fkeepallmine 30 Keeps all your changes, voids all other changes.
14 .uno%3AShareDocument 66 Opens the Share Document dialog where you can enable or disable collaborative sharing of the document.
38 modules%2Fscalc%2Fui%2Fconflictsdialog%2FConflictsDialog 89 If the same contents are changed by different users, the Resolve Conflicts dialog opens. For each conflict, decide which changes to keep.
3d modules%2Fscalc%2Fui%2Fsharedocumentdlg%2FShareDocumentDialog 66 Opens the Share Document dialog where you can enable or disable collaborative sharing of the document.
2f modules%2Fscalc%2Fui%2Fsharedocumentdlg%2Fshare dc Enable to share the current document with other users. Disable to use the document unshared. This will invalidate the not yet saved edits that other users applied in the time since you last opened or saved this document.
15 .uno%3AFormFilterExit 64 If you click on the Close button on the Form Filter toolbar, the form is displayed without a filter.
18 .uno%3AFormFilterExecute 65 If you click the Apply Form-Based Filter icon on the Form Filter toolbar, the filter will be applied.
1e .uno%3AConfigureToolboxVisible 39 Opens a dialog where you can add, edit, and remove icons.
2e cui%2Fui%2Fnewtoolbardialog%2FNewToolbarDialog 39 Opens a dialog where you can add, edit, and remove icons.
14 HID_FILTER_NAVIGATOR 195 The filter conditions that have been set appear in the Filter navigator. As soon as a filter is set, you see a blank filter entry at the bottom of the Filter navigator . You can select this entry by clicking the word "Or". Once you have selected the blank filter entry, you can enter additional filter conditions in the form. These conditions are linked by Boolean OR to the previously defined conditions.
19 SID_FM_FILTER_IS_NOT_NULL de You can edit the filter conditions in this area directly as text. If you wish to check if a field has content or no content, you can select the filter conditions "empty" (SQL:"Is Null") or "not empty" (SQL: "Is not Null").
1a .uno%3AFormFilterNavigator 69 To connect several filter conditions with Boolean OR, click the Filter navigation icon on the filter bar.
2f svx%2Fui%2Ffontworkgallerydialog%2FctlFavorites bc Select a Fontwork style and click OK to insert the Fontwork into your document. Double-click or Ctrl+double-click the Fontwork in your document to enter text edit mode and change the text.
38 svx%2Fui%2Ffontworkgallerydialog%2FFontworkGalleryDialog bc Select a Fontwork style and click OK to insert the Fontwork into your document. Double-click or Ctrl+double-click the Fontwork in your document to enter text edit mode and change the text.
12 .uno%3ASaveGraphic 96 To export a bitmap in Writer: Right-click the bitmap, choose Save Graphics. You see the Image Export dialog. Enter a file name and select a file type.
1c .uno%3APreviousTrackedChange 41 Jumps to and selects the previous change in the document, if any.
18 .uno%3ANextTrackedChange 3d Jumps to and selects the next change in the document, if any.
21 sfx%2Fui%2Fstartcenter%2Fopen_all 35 The Open a Document icon presents a file open dialog.
26 sfx%2Fui%2Fstartcenter%2Ftemplates_all 3c The Templates icon opens the Templates and Documents dialog.
21 sfx%2Fui%2Fstartcenter%2Fmath_all 42 The document icons each open a new document of the specified type.
1d sfx%2Fui%2Fstartcenter%2Fhelp 47 Click an icon on the left pane to open a new document or a file dialog.
24 sfx%2Fui%2Fstartcenter%2FStartCenter 47 Click an icon on the left pane to open a new document or a file dialog.
23 sfx%2Fui%2Fstartcenter%2Fextensions 47 Click an icon on the left pane to open a new document or a file dialog.
21 sfx%2Fui%2Fstartcenter%2Fcalc_all 42 The document icons each open a new document of the specified type.
15 FWK_HID_BACKINGWINDOW 47 Click an icon on the left pane to open a new document or a file dialog.
23 sfx%2Fui%2Fstartcenter%2Fwriter_all 42 The document icons each open a new document of the specified type.
23 sfx%2Fui%2Fstartcenter%2Fall_recent 47 Click an icon on the left pane to open a new document or a file dialog.
21 sfx%2Fui%2Fstartcenter%2Fdraw_all 42 The document icons each open a new document of the specified type.
24 sfx%2Fui%2Fstartcenter%2Fimpress_all 42 The document icons each open a new document of the specified type.
25 sfx%2Fui%2Fstartcenter%2Fdatabase_all 42 The document icons each open a new document of the specified type.
13 .uno%3AOnlineUpdate ee Enable an Internet connection for %PRODUCTNAME. If you need a Proxy, check the %PRODUCTNAME Proxy settings in Tools - Options - Internet. Then choose Check for Updates to check for the availability of a newer version of your office suite.
f .uno%3AHelpMenu 4c The Help menu allows you to start and control the $[officename] Help system.
10 .uno%3AHelpIndex 4a Opens the main page of the $[officename] Help for the current application.
c .uno%3AAbout 4b Displays general program information such as version number and copyrights.
13 .uno%3ASendFeedback 4f Opens a feedback form in the web browser, where users can report software bugs.
12 .uno%3AShowLicense d3 Displays the CREDITS.odt document which lists the names of individuals who have contributed to OpenOffice.org source code (and whose contributions were imported into LibreOffice) or LibreOffice since 2010-09-28.
13 .uno%3AExtendedHelp 47 Enables extended help tips under the mouse pointer till the next click.
e RID_ENVTOOLBOX 41 The Standard bar is available in every $[officename] application.
18 .HelpId%3Atableobjectbar 75 The Table Bar contains functions you need when working with tables. It appears when you move the cursor into a table.
14 .uno%3ADSBFormLetter 34 Starts the Mail Merge Wizard to create form letters.
17 .uno%3ADSBInsertColumns 59 Inserts all fields of the marked record into the current document at the cursor position.
13 .uno%3ADeleteRecord 40 Deletes a record. A query needs to be confirmed before deleting.
10 .uno%3ANewRecord 15 Creates a new record.
e .uno%3ARecUndo 20 Allows you to undo a data entry.
11 .uno%3ANextRecord 1d Takes you to the next record.
12 .uno%3AFirstRecord 1e Takes you to the first record.
e .uno%3ARecSave 41 Saves a new data entry. The change is registered in the database.
11 .uno%3ALastRecord 1d Takes you to the last record.
15 .uno%3AAbsoluteRecord 59 Shows the number of the current record. Enter a number to go to the corresponding record.
11 .uno%3APrevRecord 21 Takes you to the previous record.
e .uno%3AGridUse 3d Specifies that you can move objects only between grid points.
13 .uno%3ABezierDelete a8 Use the Delete Points icon to delete one or several selected points. If you wish to select several points click the appropriate points while holding down the Shift key.
13 .uno%3ABezierSmooth 41 Converts a corner point or symmetrical point into a smooth point.
16 .uno%3ABezierSymmetric 4d This icon converts a corner point or a smooth point into a symmetrical point.
13 .uno%3ABezierInsert 41 Activates the insert mode. This mode allows you to insert points.
11 .uno%3ABezierMove 2e Activates a mode in which you can move points.
1c .uno%3ABezierEliminatePoints 3c Marks the current point or the selected points for deletion.
12 HID_BEZIER_TOOLBOX 53 The Edit Points Bar appears when you select a polygon object and click Edit Points.
12 .uno%3ABezierClose 19 Closes a line or a curve.
14 .uno%3ABezierCutLine 76 The Split Curve icon splits a curve. Select the point or points where you want to split the curve, then click the icon
14 .uno%3ABezierConvert 4f Converts a curve into a straight line or converts a straight line into a curve.
11 .uno%3ABezierEdge 39 Converts the selected point or points into corner points.
16 HID_OFADLG_TREELISTBOX 18 Select an entry to edit.
18 .uno%3AOptionsTreeDialog 43 This command opens a dialog for a customized program configuration.
13 SID_GENERAL_OPTIONS cb Use this dialog to create general settings for working with $[officename]. The information covers topics such as user data, saving, printing, paths to important files and directories, and color defaults.
1e cui%2Fui%2Foptuserpage%2Femail 19 Type your e-mail address.
1c cui%2Fui%2Foptuserpage%2Ffax 23 Type your fax number in this field.
1d cui%2Fui%2Foptuserpage%2Fwork 24 Type your work number in this field.
1d cui%2Fui%2Foptuserpage%2Fhome 31 Type your private telephone number in this field.
22 cui%2Fui%2Foptuserpage%2Ffirstname 15 Type your first name.
21 cui%2Fui%2Foptuserpage%2Flastname 14 Type your last name.
1f cui%2Fui%2Foptuserpage%2Fstreet 2b Type the name of your street in this field.
1e cui%2Fui%2Foptuserpage%2Ficity 1d Type the city where you live.
24 cui%2Fui%2Foptuserpage%2FOptUserPage 2d Use this tab page to enter or edit user data.
22 cui%2Fui%2Foptuserpage%2Fshortname 13 Type your initials.
20 cui%2Fui%2Foptuserpage%2Fcompany 2c Type the name of your company in this field.
1e cui%2Fui%2Foptuserpage%2Ftitle 1e Type your title in this field.
1d cui%2Fui%2Foptuserpage%2Fizip 1c Type your ZIP in this field.
21 cui%2Fui%2Foptuserpage%2Fposition 30 Type your position in the company in this field.
1e cui%2Fui%2Foptuserpage%2Fstate 10 Type your state.
20 cui%2Fui%2Foptsavepage%2Fdoctype 51 Specifies the document type for which you want to define the default file format.
23 cui%2Fui%2Foptsavepage%2Fodfversion fc Some companies or organizations may require ODF documents in the ODF 1.0/1.1 format. You can select that format to save in the listbox. This older format cannot store all new features, so the new format ODF 1.2 (Extended) is recommended where possible.
28 cui%2Fui%2Foptsavepage%2Fload_docprinter 16c If enabled, the printer settings will be loaded with the document. This can cause a document to be printed on a distant printer, if you do not change the printer manually in the Print dialog. If disabled, your standard printer will be used to print this document. The current printer settings will be stored with the document whether or not this option is checked.
20 cui%2Fui%2Foptsavepage%2Fdocinfo 5b Specifies that the Properties dialog will appear every time you select the Save As command.
26 cui%2Fui%2Foptsavepage%2Frelative_fsys 3f Select this box for relative saving of URLs in the file system.
20 sfx%2Fui%2Falienwarndialog%2Fask c2 You can choose to get a warning message when you save a document in a format that is not OpenDocument or which you did not set as default format in Load/Save - General in the Options dialog box.
26 cui%2Fui%2Foptsavepage%2Frelative_inet 3c Select this box for relative saving of URLs to the Internet.
26 cui%2Fui%2Foptsavepage%2Fload_settings 47 Loads the user-specific settings saved in a document with the document.
24 cui%2Fui%2Foptsavepage%2FOptSavePage 72 In the General section, you can select default settings for saving documents, and can select default file formats.
1f cui%2Fui%2Foptsavepage%2Fsaveas b1 Specifies how documents of the type selected on the left will always be saved as this file type. You may select another file type for the current document in the Save as dialog.
28 cui%2Fui%2Foptsavepage%2Fwarnalienformat c2 You can choose to get a warning message when you save a document in a format that is not OpenDocument or which you did not set as default format in Load/Save - General in the Options dialog box.
1f cui%2Fui%2Foptsavepage%2Fbackup d5 Saves the previous version of a document as a backup copy whenever you save a document. Every time %PRODUCTNAME creates a backup copy, the previous backup copy is replaced. The backup copy gets the extension .BAK.
21 cui%2Fui%2Foptsavepage%2Fautosave 94 Specifies that %PRODUCTNAME saves the information needed to restore all open documents in case of a crash. You can specify the saving time interval.
26 cui%2Fui%2Foptsavepage%2Fautosave_spin 49 Specifies the time interval in minutes for the automatic recovery option.
25 cui%2Fui%2Foptsavepage%2Fuserautosave 8d Specifies that %PRODUCTNAME saves all open documents when saving auto recovery information. Uses the same time interval as AutoRecovery does.
1e cui%2Fui%2Foptpathspage%2Fedit 36 Click to display the Select Path or Edit Paths dialog.
21 cui%2Fui%2Foptpathspage%2Fdefault 48 The Default button resets the predefined paths for all selected entries.
1f cui%2Fui%2Foptpathspage%2Fpaths 65 To modify an entry in this list, click the entry and click Edit. You can also double click the entry.
26 cui%2Fui%2Foptpathspage%2FOptPathsPage 75 This section contains the default paths to important folders in $[officename]. These paths can be edited by the user.
21 cui%2Fui%2Fselectpathdialog%2Fadd 60 Opens the Select Path dialog to select another folder or the Open dialog to select another file.
23 cui%2Fui%2Fselectpathdialog%2Fpaths 5f Contains a list of the paths that have already been added. Mark the default path for new files.
12 .uno%3ASpellOnline 41 Automatically checks spelling as you type, and underlines errors.
2a cui%2Fui%2Foptlingupage%2Flingudictsdelete 59 Deletes the selected dictionary after a confirmation, provided it is not write-protected.
26 cui%2Fui%2Foptlingupage%2Flinguoptions 37 Defines the options for the spellcheck and hyphenation.
28 cui%2Fui%2Feditdictionarydialog%2Fdelete 3b Removes the marked word from the current custom dictionary.
26 cui%2Fui%2Feditdictionarydialog%2Fword 86 You can type a new word for inclusion in the dictionary. In the list below you will see the contents of the current custom dictionary.
29 cui%2Fui%2Feditdictionarydialog%2Freplace a6 This input field is only available if you are editing an exception dictionary. The field shows the alternative suggestion for the current word in the "Word" text box.
28 cui%2Fui%2Foptlingupage%2Flingudictsedit 71 Opens the Edit custom dictionary dialog, in which you can add to your custom dictionary or edit existing entries.
26 cui%2Fui%2Foptlingupage%2Flingumodules 28 Contains the installed language modules.
2a cui%2Fui%2Foptlingupage%2Flingumodulesedit 34 To edit a language module, select it and click Edit.
31 cui%2Fui%2Fbreaknumberoptions%2FBreakNumberOption 50 Type the minimum number of characters that must come before or after the hyphen.
26 cui%2Fui%2Foptlingupage%2FOptLinguPage 46 Specifies the properties of the spellcheck, thesaurus and hyphenation.
2c cui%2Fui%2Foptnewdictionarydialog%2Fnameedit 30 Specifies the name of the new custom dictionary.
27 cui%2Fui%2Foptlingupage%2Flingudictsnew 8a Opens the New Dictionary dialog, in which you can name a new user-defined dictionary or dictionary of exceptions and specify the language.
2a cui%2Fui%2Foptnewdictionarydialog%2Fexcept 44 Specifies whether you wish to avoid certain words in your documents.
2c cui%2Fui%2Feditdictionarydialog%2Fnewreplace a0 Adds the word in the Word text field to your current custom dictionary. The word in the Suggestion field is also added when working with exception dictionaries.
2c cui%2Fui%2Foptnewdictionarydialog%2Flanguage 4f By selecting a certain language you can limit the use of the custom dictionary.
2a cui%2Fui%2Foptlingupage%2Flinguoptionsedit 44 If you want to change a value, select the entry and then click Edit.
26 cui%2Fui%2Feditdictionarydialog%2Fbook 20 Specifies the book to be edited.
26 cui%2Fui%2Feditdictionarydialog%2Flang 38 Assigns a new language to the current custom dictionary.
23 cui%2Fui%2Feditmodulesdialog%2Fback 37 Click here to undo the current changes in the list box.
29 cui%2Fui%2Feditmodulesdialog%2Flingudicts 71 Specifies the language and the available spelling, hyphenation and Thesaurus sub-modules for the selected module.
21 cui%2Fui%2Feditmodulesdialog%2Fup 4b Increases the priority of the module selected in the list box by one level.
27 cui%2Fui%2Feditmodulesdialog%2Flanguage 25 Specifies the language of the module.
23 cui%2Fui%2Feditmodulesdialog%2Fdown 4b Decreases the priority of the module selected in the list box by one level.
1b cui%2Fui%2Fcolorpage%2Fsave 63 Opens the Save As dialog, which enables you to save the current color table under a specified name.
1b cui%2Fui%2Fcolorpage%2Fload 44 Accesses the Open dialog, which allows you to select a color palette
1d cui%2Fui%2Fcolorpage%2Fmodify 1a Changes the current color.
1a cui%2Fui%2Fcolorpage%2Fadd 11 Adds a new color.
18 cui%2Fui%2Fcolorpage%2FK 5 Black
1e cui%2Fui%2Fcolorpage%2Fcolorlb 51 Contains a list of available colors. To select a color, choose one from the list.
1b cui%2Fui%2Fcolorpage%2Fname 69 Specifies the name of a selected color. You can also type a name in this field when defining a new color.
20 cui%2Fui%2Fcolorpage%2FColorPage 5e Allows you to select a color from a color table, edit an existing color, or define new colors.
18 cui%2Fui%2Fcolorpage%2FR 3 Red
1e cui%2Fui%2Fcolorpage%2Fmodellb 5c To modify, select the color model: Red-Green-Blue (RGB) or Cyan-Magenta-Yellow-BlacK (CMYK).
18 cui%2Fui%2Fcolorpage%2FB 4 Blue
18 cui%2Fui%2Fcolorpage%2FG 5 Green
18 cui%2Fui%2Fcolorpage%2FM 7 Magenta
18 cui%2Fui%2Fcolorpage%2FC 4 Cyan
18 cui%2Fui%2Fcolorpage%2FY 6 Yellow
33 SVTOOLS%3ANUMERICFIELD%3ADLG_COLOR%3ANUM_SATURATION 2b Sets the Saturation in the HSB color model.
28 SVTOOLS%3APUSHBUTTON%3ADLG_COLOR%3ABTN_2 b7 Sets the small selection cursor in the right window on the color, which corresponds to the selected color in the left window and updates the respective values in the numerical fields.
28 SVTOOLS%3APUSHBUTTON%3ADLG_COLOR%3ABTN_1 b7 Click the <-- button to replace the selected color in the color palette with the color selected at the right. The button is enabled when you select a color in one of the four corners.
25 SVTOOLS_METRICFIELD_DLG_COLOR_NUM_KEY 42 Sets the Black color value or key (black) in the CMYK color model.
26 SVTOOLS_METRICFIELD_DLG_COLOR_NUM_CYAN 32 Sets the Cyan color value in the CMYK color model.
28 SVTOOLS_METRICFIELD_DLG_COLOR_NUM_YELLOW 34 Sets the Yellow color value in the CMYK color model.
2c SVTOOLS%3ANUMERICFIELD%3ADLG_COLOR%3ANUM_RED 30 Sets the Red color value in the RGB color model.
2d SVTOOLS%3ANUMERICFIELD%3ADLG_COLOR%3ANUM_BLUE 31 Sets the Blue color value in the RGB color model.
29 SVTOOLS_METRICFIELD_DLG_COLOR_NUM_MAGENTA 35 Sets the Magenta color value in the CMYK color model.
2c SVTOOLS%3ANUMERICFIELD%3ADLG_COLOR%3ANUM_HUE 24 Sets the Hue in the HSB color model.
32 SVTOOLS%3ANUMERICFIELD%3ADLG_COLOR%3ANUM_LUMINANCE 2b Sets the Brightness in the HSB color model.
2e SVTOOLS%3ANUMERICFIELD%3ADLG_COLOR%3ANUM_GREEN 32 Sets the Green color value in the RGB color model.
20 cui%2Fui%2Foptgeneralpage%2Fyear 4a Defines a date range, within which the system recognizes a two-digit year.
2a cui%2Fui%2Foptgeneralpage%2FOptGeneralPage 31 Specifies the general settings for $[officename].
25 cui%2Fui%2Foptgeneralpage%2Fdocstatus 48 Specifies whether the printing of the document counts as a modification.
24 cui%2Fui%2Foptgeneralpage%2Ftooltips 86 Displays the icon names and more bubble help information, for example, chapter names when you scroll through a document with chapters.
23 cui%2Fui%2Foptgeneralpage%2Fexthelp 63 Displays a help text when you rest the cursor on an icon, a menu command, or a control on a dialog.
23 cui%2Fui%2Foptgeneralpage%2Ffiledlg 84 Specifies whether $[officename] dialogs are used to open and save documents. Otherwise the dialogs of the operating system are used.
1f cui%2Fui%2Foptfontspage%2Fapply 26 Applies the selected font replacement.
24 cui%2Fui%2Foptfontspage%2Ffontheight 41 Select a font size for the display of HTML and Basic source code.
26 cui%2Fui%2Foptfontspage%2Freplacements e6 Substitutes a font with a font of your choice. The substitution replaces a font only when it is displayed on screen, or on screen and when printing. The replacement does not change the font settings that are saved in the document.
1f cui%2Fui%2Foptfontspage%2Ffont2 31 Enter or select the name of the replacement font.
1f cui%2Fui%2Foptfontspage%2Ffont1 3e Enter or select the name of the font that you want to replace.
29 cui%2Fui%2Foptfontspage%2Fnonpropfontonly 43 Check to display only non-proportional fonts in the Fonts list box.
22 cui%2Fui%2Foptfontspage%2Fusetable 36 Enables the font replacement settings that you define.
22 cui%2Fui%2Foptfontspage%2Ffontname 3e Select the font for the display of HTML and Basic source code.
20 cui%2Fui%2Foptfontspage%2Fdelete 26 Deletes the selected font replacement.
21 cui%2Fui%2Foptfontspage%2Fchecklb f0 Lists the original font and the font that will replace it. Select Always to replace the font, even if the original font is installed on your system. Select Screen only to replace the screen font only and never replace the font for printing.
21 cui%2Fui%2Foptviewpage%2Fuseaccel 63 Directly accesses hardware features of the graphical display adapter to improve the screen display.
21 cui%2Fui%2Foptviewpage%2Fmousepos 52 Specifies if and how the mouse pointer will be positioned in newly opened dialogs.
22 cui%2Fui%2Foptviewpage%2Ficonstyle 38 Select the icon style for icons in toolbars and dialogs.
1e cui%2Fui%2Foptviewpage%2Fuseaa af When supported, you can enable and disable anti-aliasing of graphics. With anti-aliasing enabled, the display of most graphical objects looks smoother and with less artifacts.
5 20201 4a Press Shift+Ctrl+R to restore or refresh the view of the current document.
23 cui%2Fui%2Foptviewpage%2Fwindowsize 62 Uses percentile scaling for font size in user interface elements, such as dialogs and icon labels.
19 .uno%3ARestoreEditingView 87 Specifies whether to restore the last used document view. Many view properties valid when the document was last saved will be restored.
1e cui%2Fui%2Foptviewpage%2Ftrans b0 If enabled, the text selection in Writer and the cell selection in Calc will be shown using a transparent color. If not enabled, the selection will be shown by inverted colors.
21 cui%2Fui%2Foptviewpage%2Ficonsize 2c Specifies the display size of toolbar icons.
24 cui%2Fui%2Foptviewpage%2Fmousemiddle 30 Defines the function of the middle mouse button.
20 cui%2Fui%2Foptviewpage%2Ftransmf 7a Select the transparency level for transparent selections. The default value is 75%. You can select values from 10% to 90%.
1f cui%2Fui%2Foptviewpage%2Faafont 2f Select to smooth the screen appearance of text.
23 cui%2Fui%2Foptviewpage%2Fsystemfont 67 Specifies to use the system font to display all menus and dialogs. Else another installed font is used.
1d cui%2Fui%2Foptviewpage%2Faanf 33 Enter the smallest font size to apply antialiasing.
28 cui%2Fui%2Foptviewpage%2Fshowfonthistory 82 Lists the last five fonts that you used in the current document at the top of the list in the Font Name box on the Formatting bar.
22 cui%2Fui%2Foptviewpage%2Fmenuicons a4 Displays icons next to the corresponding menu items. Select from "Automatic", "Hide" and "Show". "Automatic" displays icons according to system settings and themes.
28 cui%2Fui%2Foptviewpage%2Fshowfontpreview 7b Displays the names of selectable fonts in the corresponding font, for example, fonts in the Font box on the Formatting bar.
1f sfx%2Fui%2Foptprintpage%2Ftrans 69 Mark this check box if you always want to be warned if transparent objects are contained in the document.
25 sfx%2Fui%2Foptprintpage%2Fpaperorient 5e Mark this check box if you need a certain paper orientation for printing the current document.
23 sfx%2Fui%2Foptprintpage%2Fpapersize 58 Mark this check box if a certain paper size is needed for printing the current document.
20 sfx%2Fui%2Foptprintpage%2Fframe2 35 Defines which warnings appear before printing begins.
29 sfx%2Fui%2Foptprintpage%2Freducegradcolor 49 Specifies that gradients are only printed in a single intermediate color.
29 sfx%2Fui%2Foptprintpage%2Freducetransauto 76 Specifies that the transparency is only printed if the transparent area covers less than a quarter of the entire page.
25 sfx%2Fui%2Foptprintpage%2Freducetrans a5 If you mark this field the transparent objects will be printed like normal, non-transparent objects, depending on your selection in the following two option buttons.
26 sfx%2Fui%2Foptprintpage%2Freducebitmap 6e Specifies that bitmaps are printed with reduced quality. The resolution can only be reduced and not increased.
24 sfx%2Fui%2Foptprintpage%2Freducegrad 44 If this field is marked, gradients are printed with reduced quality.
27 sfx%2Fui%2Foptprintpage%2Fconverttogray 38 Specifies that all colors are printed only as grayscale.
26 sfx%2Fui%2Foptprintpage%2FOptPrintPage 24 Specifies the print setting options.
29 sfx%2Fui%2Foptprintpage%2Freducetransnone 2f With this option transparency is never printed.
2d sfx%2Fui%2Foptprintpage%2Freducebitmapoptimal 75 High print quality corresponds to a resolution of 300dpi. Normal print quality corresponds to a resolution of 200dpi.
29 sfx%2Fui%2Foptprintpage%2Freducebitmapdpi 61 Specifies the maximum print quality in dpi. The resolution can only be reduced and not increased.
28 sfx%2Fui%2Foptprintpage%2Freducegradstep 3e Specifies the maximum number of gradient stripes for printing.
1e sfx%2Fui%2Foptprintpage%2Ffile 57 Specifies whether the print settings apply to direct printing or to printing to a file.
2b sfx%2Fui%2Foptprintpage%2Freducebitmaptrans 75 If this field is marked, the reduction in print quality for bitmaps also applies to the transparent areas of objects.
23 cui%2Fui%2Foptmemorypage%2Folecache 46 Choose the maximum number of OLE objects that are pooled in the cache.
25 cui%2Fui%2Foptmemorypage%2Fobjecttime 4f Specifies the time that each graphic remains in the cache in hours and minutes.
28 cui%2Fui%2Foptmemorypage%2FOptMemoryPage 51 Defines the settings for the graphics cache and the number of steps you can undo.
1f cui%2Fui%2Foptmemorypage%2Fundo 5b You can specify the number of steps which can be undone by selecting a number from the box.
27 cui%2Fui%2Foptmemorypage%2Fgraphiccache 30 Specifies the total cache size for all graphics.
26 cui%2Fui%2Foptmemorypage%2Fobjectcache 89 Mark this check box if you want $[officename] to enable quickstart. This option is available if the Quickstart module has been installed.
2a cui%2Fui%2Foptappearancepage%2Fcolorconfig 32 Select the colors for the user interface elements.
2c cui%2Fui%2Foptappearancepage%2Fcolorschemelb 29 Selects the color scheme you want to use.
25 cui%2Fui%2Foptappearancepage%2Fdelete 57 Deletes the color scheme shown in the Scheme box. You cannot delete the Default scheme.
23 cui%2Fui%2Foptappearancepage%2Fsave 47 Saves the current settings as a color scheme that you can reload later.
30 cui%2Fui%2Foptappearancepage%2FOptAppearancePage 35 Sets the colors for the $[officename] user interface.
23 HID_OPTIONS_COLORCONFIG_NAME_SCHEME 22 Enter a name for the color scheme.
38 cui%2Fui%2Foptaccessibilitypage%2Fsystempagepreviewcolor 4c Applies the high contrast settings of the operating system to page previews.
2f cui%2Fui%2Foptaccessibilitypage%2Fautofontcolor 6c Displays fonts in %PRODUCTNAME using the system color settings. This option only affects the screen display.
32 cui%2Fui%2Foptaccessibilitypage%2Ftiphelptimeoutnf 35 Enter the number of seconds to display the Help tips.
30 cui%2Fui%2Foptaccessibilitypage%2Ftiphelptimeout 3f Hides the Help tips after the number of seconds that you enter.
36 cui%2Fui%2Foptaccessibilitypage%2FOptAccessibilityPage 83 Sets options that make %PRODUCTNAME programs more accessible for users with reduced sight, limited dexterity or other disabilities.
2e cui%2Fui%2Foptaccessibilitypage%2Fanimatedtext 48 Previews animated text, such as blinking and scrolling, in %PRODUCTNAME.
2e cui%2Fui%2Foptaccessibilitypage%2Fautodetecthc 5c Switches %PRODUCTNAME into high contrast mode when the system background color is very dark.
33 cui%2Fui%2Foptaccessibilitypage%2Ftextselinreadonly 27 Displays cursor in read-only documents.
32 cui%2Fui%2Foptaccessibilitypage%2Fanimatedgraphics 40 Previews animated graphics, such as GIF images, in %PRODUCTNAME.
24 SVX_EDIT_RID_SVXPAGE_SSO_ED_USERNAME 57 Using "simple" authentication method, you enter your user name on the LDAP server here.
28 SVX_CHECKBOX_RID_SVXPAGE_SSO_CB_PASSWORD 56 Using "simple" authentication method, check this box to make your password persistent.
24 SVX_EDIT_RID_SVXPAGE_SSO_ED_PASSWORD 5d Using "simple" authentication method, enter your password for access to the LDAP server here.
28 SVX_LISTBOX_RID_SVXPAGE_SSO_LB_MECHANISM 3d Choose your security mechanism for access to the LDAP server.
24 cui%2Fui%2Foptsavepage%2FOptSavePage 25 Specifies general Load/Save settings.
21 cui%2Fui%2Foptproxypage%2Fnoproxy 62 Specifies the names of the servers that do not require any proxy servers, separated by semicolons.
21 cui%2Fui%2Foptproxypage%2Fftpport 31 Type the port for the corresponding proxy server.
23 cui%2Fui%2Foptproxypage%2Fproxymode 27 Specifies the type of proxy definition.
1e cui%2Fui%2Foptproxypage%2Fhttp 2b Type the name of the proxy server for HTTP.
1d cui%2Fui%2Foptproxypage%2Fftp 2a Type the name of the proxy server for FTP.
1f cui%2Fui%2Foptproxypage%2Fhttps 53 Type the name of the proxy server for HTTPS. Type the port in the right-hand field.
20 cui%2Fui%2Foptemailpage%2Fbrowse 31 Opens a file dialog to select the e-mail program.
1d cui%2Fui%2Foptemailpage%2Furl 27 Enter the e-mail program path and name.
9 703992332 20 Opens the Macro Security dialog.
2d cui%2Fui%2Fstoredwebconnectiondialog%2Fchange 51 Opens a dialog where you can view and change the password for the selected entry.
40 cui%2Fui%2Fstoredwebconnectiondialog%2FStoredWebConnectionDialog 29 Removes the selected entry from the list.
28 cui%2Fui%2Foptsecuritypage%2Fconnections 70 Asks for the master password. If master password is correct, shows the Stored Web Connection Information dialog.
33 uui%2Fui%2Fmasterpassworddlg%2FMasterPasswordDialog 26 Enter the master password to continue.
2b uui%2Fui%2Fsetmasterpassworddlg%2Fpassword1 1a Enter the master password.
2d cui%2Fui%2Fstoredwebconnectiondialog%2Fremove 29 Removes the selected entry from the list.
2b cui%2Fui%2Foptsecuritypage%2Fmasterpassword 27 Opens the Enter Master Password dialog.
9 703988740 6b Select to see a warning dialog when you try to print a document that contains recorded changes or comments.
9 703988741 cb Select to see a warning dialog when you try to sign a document that contains recorded changes, versions, fields, references to other sources (for example linked sections or linked pictures), or comments.
9 703988739 7d Select to see a warning dialog when you try to save or send a document that contains recorded changes, versions, or comments.
9 703988742 93 Select to see a warning dialog when you try to export a document to PDF format that displays recorded changes in Writer, or that displays comments.
2b uui%2Fui%2Fsetmasterpassworddlg%2Fpassword2 20 Enter the master password again.
9 703988743 e3 Select to always remove user data from the file properties. If this option is not selected, you can still remove the personal information for the current document with the Reset Properties button on File - Properties - General.
24 cui%2Fui%2Foptsecuritypage%2Foptions 30 Opens the "Security options and warning" dialog.
2c cui%2Fui%2Foptsecuritypage%2FOptSecurityPage 76 Defines the security options for saving documents, for web connections, and for opening documents that contain macros.
30 cui%2Fui%2Fstoredwebconnectiondialog%2Fremoveall 22 Removes all entries from the list.
9 703988744 8e Select to always enable the Save with password option in the file save dialogs. Deselect the option to save files by default without password.
29 cui%2Fui%2Foptsecuritypage%2Fsavepassword bb If enabled, %PRODUCTNAME will securely store all passwords that you use to access files from web servers. You can retrieve the passwords from the list after you enter the master password.
2c cui%2Fui%2Fsecurityoptionsdialog%2Fctrlclick 88 If enabled, you must hold down the Ctrl key while clicking a hyperlink to follow that link. If not enabled, a click opens the hyperlink.
20 cui%2Fui%2Fopthtmlpage%2Fcharset 33 Select the appropriate character set for the export
29 cui%2Fui%2Fopthtmlpage%2Fnumbersenglishus d6 If not checked, numbers will be interpreted according to the setting in Language Settings - Language of - Locale setting in the Options dialog box. If checked, numbers will be interpreted as 'English (USA)' locale.
23 cui%2Fui%2Fopthtmlpage%2Funknowntag 67 Mark this check box if you want tags that are not recognized by $[officename] to be imported as fields.
28 cui%2Fui%2Fopthtmlpage%2Fignorefontnames 97 Mark this check box to ignore all font settings when importing. The fonts that were defined in the HTML Page Style will be the fonts that will be used.
22 cui%2Fui%2Fopthtmlpage%2Fstarbasic 62 Mark this check box to include the $[officename] Basic instructions when exporting to HTML format.
1f cui%2Fui%2Fopthtmlpage%2Fexport 32 Defines the settings for exporting HTML documents.
29 cui%2Fui%2Fopthtmlpage%2Fstarbasicwarning 6f If this field is marked, when exporting to HTML a warning is shown that %PRODUCTNAME Basic macros will be lost.
1e cui%2Fui%2Fopthtmlpage%2Fsize7 7b Use the spin buttons Size 1 to Size 7 to define the respective font sizes for the HTML <font size=1> to <font size=7> tags.
27 cui%2Fui%2Fopthtmlpage%2Fprintextension a2 If you mark this field, the print layout of the current document (for example, table of contents with justified page numbers and dot leaders) is exported as well.
24 cui%2Fui%2Fopthtmlpage%2FOptHtmlPage 20 Defines settings for HTML pages.
25 cui%2Fui%2Fopthtmlpage%2Fsavegrflocal dd Mark this check box to automatically upload the embedded pictures to the Internet server when uploading using FTP. Use the Save As dialog to save the document and enter a complete FTP URL as the file name in the Internet.
14 .uno%3ASwEditOptions a4 These settings determine the way text documents that are created in $[officename] are handled. It is also possible to define settings for the current text document.
33 modules%2Fswriter%2Fui%2Fviewoptionspage%2Fcomments dc Displays comments. Click a comment to edit the text. Use the context menu in Navigator to locate or delete a comment. Use the comments's context menu to delete this comment or all comments or all comments of this author.
16 .uno%3ATableBoundaries 8c To display the table boundaries, right-click any table and choose Table Boundaries, or choose Table - Table Boundaries in a Writer document.
35 modules%2Fswriter%2Fui%2Fviewoptionspage%2Fhscrollbar 22 Displays the horizontal scrollbar.
39 modules%2Fswriter%2Fui%2Fviewoptionspage%2Fvrulercombobox 5d Displays the vertical ruler. Select the desired measurement unit from the corresponding list.
36 modules%2Fswriter%2Fui%2Fviewoptionspage%2Fmeasureunit 26 Specifies the Unit for HTML documents.
31 modules%2Fswriter%2Fui%2Fviewoptionspage%2Ftables 2f Displays the tables contained in your document.
37 modules%2Fswriter%2Fui%2Fviewoptionspage%2Fsmoothscroll 2d Activates the smooth page scrolling function.
34 modules%2Fswriter%2Fui%2Fviewoptionspage%2Fhelplines ab Displays snap lines around the frames when frames are moved. You can select the Helplines While Moving option to show the exact position of the object using lineal values.
33 modules%2Fswriter%2Fui%2Fviewoptionspage%2Fdrawings 3e Displays the drawings and controls contained in your document.
3a modules%2Fswriter%2Fui%2Fviewoptionspage%2FViewOptionsPage 81 Defines the default settings for displaying objects in your text documents and also the default settings for the window elements.
30 modules%2Fswriter%2Fui%2Fviewoptionspage%2Fruler 59 Enables the rulers. Use the following two check boxes to select the ruler(s) to be shown.
39 modules%2Fswriter%2Fui%2Fviewoptionspage%2Fhrulercombobox 5f Displays the horizontal ruler. Select the desired measurement unit from the corresponding list.
35 modules%2Fswriter%2Fui%2Fviewoptionspage%2Ffieldcodes 4f Displays the field names in the document instead of the contents of the fields.
35 modules%2Fswriter%2Fui%2Fviewoptionspage%2Fvscrollbar 20 Displays the vertical scrollbar.
36 modules%2Fswriter%2Fui%2Fviewoptionspage%2Fvrulerright 30 Aligns the vertical ruler with the right border.
33 modules%2Fswriter%2Fui%2Fviewoptionspage%2Fgraphics 40 Specifies whether to display graphics and objects on the screen.
35 modules%2Fswriter%2Fui%2Foptfonttabpage%2Ftitleheight 1f Specifies the size of the font.
30 modules%2Fswriter%2Fui%2Foptfonttabpage%2Fidxbox 52 Specifies the font used for indexes, alphabetical indexes, and tables of contents.
38 modules%2Fswriter%2Fui%2Foptfonttabpage%2Fstandardheight 1f Specifies the size of the font.
35 modules%2Fswriter%2Fui%2Foptfonttabpage%2Fstandardbox 3e Specifies the font to be used for the Default Paragraph Style.
35 modules%2Fswriter%2Fui%2Foptfonttabpage%2Findexheight 1f Specifies the size of the font.
31 modules%2Fswriter%2Fui%2Foptfonttabpage%2Flistbox 43 Specifies the fonts for lists and numbering and all derived styles.
38 modules%2Fswriter%2Fui%2Foptfonttabpage%2FOptFontTabPage 3d Specifies the settings for the basic fonts in your documents.
32 modules%2Fswriter%2Fui%2Foptfonttabpage%2Flabelbox 3e Specifies the font used for the captions of images and tables.
34 modules%2Fswriter%2Fui%2Foptfonttabpage%2Flistheight 1f Specifies the size of the font.
35 modules%2Fswriter%2Fui%2Foptfonttabpage%2Flabelheight 1f Specifies the size of the font.
31 modules%2Fswriter%2Fui%2Foptfonttabpage%2Fdoconly 3f Specifies that the settings apply to the current document only.
32 modules%2Fswriter%2Fui%2Foptfonttabpage%2Ftitlebox 2b Specifies the font to be used for headings.
3b modules%2Fswriter%2Fui%2Fprintoptionspage%2Ftextplaceholder 78 Enable this option to print text placeholders. Disable this option to leave the text placeholders blank in the printout.
33 modules%2Fswriter%2Fui%2Fprintoptionspage%2Fendpage 38 Specifies whether comments in your document are printed.
38 .HelpID%3Avcl%3APrintDialog%3APrintEmptyPages%3ACheckBox 190 If this option is enabled, automatically-inserted blank pages are being printed. This is best if you are printing double-sided. For example, in a book, a "chapter" paragraph style has been set to always start with an odd numbered page. If the previous chapter ends on an odd page, %PRODUCTNAME inserts an even numbered blank page. This option controls whether to print that even numbered page or not.
3c .HelpId%3Avcl%3APrintDialog%3APrintPageBackground%3ACheckBox 95 Specifies whether to include colors and objects that are inserted to the background of the page (Format - Page - Background) in the printed document.
34 modules%2Fswriter%2Fui%2Fprintoptionspage%2Fbrochure 45 Select the Brochure option to print your document in brochure format.
36 modules%2Fswriter%2Fui%2Fprintoptionspage%2Fbackground 95 Specifies whether to include colors and objects that are inserted to the background of the page (Format - Page - Background) in the printed document.
36 modules%2Fswriter%2Fui%2Fprintoptionspage%2Fhiddentext 3a Enable this option to print text that is marked as hidden.
36 modules%2Fswriter%2Fui%2Fprintoptionspage%2Fblankpages 190 If this option is enabled, automatically-inserted blank pages are being printed. This is best if you are printing double-sided. For example, in a book, a "chapter" paragraph style has been set to always start with an odd numbered page. If the previous chapter ends on an odd page, %PRODUCTNAME inserts an even numbered blank page. This option controls whether to print that even numbered page or not.
3c modules%2Fswriter%2Fui%2Fprintoptionspage%2FPrintOptionsPage 38 Specifies print settings within a text or HTML document.
35 modules%2Fswriter%2Fui%2Fprintoptionspage%2Fpapertray a9 For printers with multiple trays, the "Paper tray from printer settings" option specifies whether the paper tray used is specified by the system settings of the printer.
35 modules%2Fswriter%2Fui%2Fprintoptionspage%2Fleftpages 4a Specifies whether to print all left (even numbered) pages of the document.
2f modules%2Fswriter%2Fui%2Fprintoptionspage%2Frtl 59 Check to print the pages of the brochure in the correct order for a right-to-left script.
38 .HelpID%3Avcl%3APrintDialog%3APrintHiddenText%3ACheckBox 3a Enable this option to print text that is marked as hidden.
33 modules%2Fswriter%2Fui%2Fprintoptionspage%2Finblack 30 Specifies whether to always print text in black.
36 modules%2Fswriter%2Fui%2Fprintoptionspage%2Frightpages 4a Specifies whether to print all right (odd numbered) pages of the document.
3b .HelpID%3Avcl%3APrintDialog%3APrintAnnotationMode%3AListBox 38 Specifies whether comments in your document are printed.
3d .HelpId%3Avcl%3APrintDialog%3APrintTextPlaceholder%3ACheckBox 78 Enable this option to print text placeholders. Disable this option to leave the text placeholders blank in the printout.
30 modules%2Fswriter%2Fui%2Fprintoptionspage%2Fnone 38 Specifies whether comments in your document are printed.
34 modules%2Fswriter%2Fui%2Fprintoptionspage%2Fgraphics 41 Specifies whether the graphics of your text document are printed.
38 modules%2Fswriter%2Fui%2Fprintoptionspage%2Fformcontrols 4b Specifies whether the form control fields of the text document are printed.
30 modules%2Fswriter%2Fui%2Fprintoptionspage%2Fonly 38 Specifies whether comments in your document are printed.
2f modules%2Fswriter%2Fui%2Fprintoptionspage%2Ffax 84 If you have installed fax software on your computer and wish to fax directly from the text document, select the desired fax machine.
2f modules%2Fswriter%2Fui%2Fprintoptionspage%2Fend 38 Specifies whether comments in your document are printed.
31 modules%2Fswriter%2Fui%2Fopttablepage%2Fcolinsert 32 Specifies the default value for inserting columns.
31 modules%2Fswriter%2Fui%2Fopttablepage%2Frowinsert 2f Specifies the default value for inserting rows.
31 modules%2Fswriter%2Fui%2Fopttablepage%2Fdontsplit 43 Specifies that tables are not split by any type of text flow break.
34 modules%2Fswriter%2Fui%2Fopttablepage%2Frepeatheader 59 Specifies whether the table heading is carried over onto the new page after a page break.
2b modules%2Fswriter%2Fui%2Fopttablepage%2Ffix 56 Specifies that changes to a row or column only affect the corresponding adjacent area.
2f modules%2Fswriter%2Fui%2Fopttablepage%2Frowmove 30 Specifies the value to be used for moving a row.
2f modules%2Fswriter%2Fui%2Fopttablepage%2Fcolmove 33 Specifies the value to be used for moving a column.
34 modules%2Fswriter%2Fui%2Fopttablepage%2FOptTablePage 33 Defines the attributes of tables in text documents.
38 modules%2Fswriter%2Fui%2Fopttablepage%2Fnumfmtformatting 9a If Number format recognition is not marked, only input in the format that has been set at the cell is accepted. Any other input resets the format to Text.
2e modules%2Fswriter%2Fui%2Fopttablepage%2Fborder 34 Specifies that table cells have a border by default.
2b modules%2Fswriter%2Fui%2Fopttablepage%2Fvar 40 Specifies that changes to a row or column affect the table size.
35 modules%2Fswriter%2Fui%2Fopttablepage%2Fnumformatting 4f Specifies that numbers in a text table are recognized and formatted as numbers.
2f modules%2Fswriter%2Fui%2Fopttablepage%2Ffixprop 4d Specifies that changes to a row or column have an effect on the entire table.
2e modules%2Fswriter%2Fui%2Fopttablepage%2Fheader 60 Specifies that the first row of the table is formatted with the "Table heading" Paragraph Style.
34 modules%2Fswriter%2Fui%2Fopttablepage%2Fnumalignment 43 Specifies that numbers are always bottom right aligned in the cell.
34 modules%2Fswriter%2Fui%2Foptformataidspage%2Ffilltab 7f When the direct cursor is used, as many tabs as necessary are added in the new paragraph until the clicked position is reached.
37 modules%2Fswriter%2Fui%2Foptformataidspage%2Ffillindent 9d When the direct cursor is used, the left paragraph indent is set at the horizontal position where you click the direct cursor. The paragraph is left aligned.
37 modules%2Fswriter%2Fui%2Foptformataidspage%2Ffillmargin 102 Sets the paragraph alignment when the direct cursor is used. Depending on where the mouse is clicked, the paragraph is formatted left aligned, centered or right aligned. The cursor before the mouse-click shows, by means of a triangle, which alignment is set.
38 modules%2Fswriter%2Fui%2Foptformataidspage%2Fcursoronoff 1c Activates the direct cursor.
3c modules%2Fswriter%2Fui%2Foptformataidspage%2Fhiddenparafield 6e If you have inserted text using the Hidden Paragraph field, specifies whether to display the hidden paragraph.
36 modules%2Fswriter%2Fui%2Foptformataidspage%2Ffillspace 9f When the Direct Cursor is used, a corresponding number of tabs and spaces are inserted in the new paragraph as necessary until the clicked position is reached.
34 modules%2Fswriter%2Fui%2Foptformataidspage%2Fhyphens 185 Specifies whether soft hyphens (called also as optional or discretionary hyphens) are displayed. These are hidden user-defined delimiters that you enter within a word by pressing Ctrl+Hyphen(-). Words with soft hyphens are only separated at the end of a line at the point where a soft hyphen has been inserted, irrespective of whether the automatic hyphenation is activated or deactivated.
32 modules%2Fswriter%2Fui%2Foptformataidspage%2Fbreak 82 Displays all line breaks inserted with the Shift+Enter shortcut. These breaks create a new line, but do not start a new paragraph.
31 modules%2Fswriter%2Fui%2Foptformataidspage%2Ftabs 37 Specifies that tab stops are displayed as small arrows.
3e modules%2Fswriter%2Fui%2Foptformataidspage%2FOptFormatAidsPage 6f In $[officename] text and HTML documents, defines the display for certain characters and for the direct cursor.
35 modules%2Fswriter%2Fui%2Foptformataidspage%2Fnonbreak af Specifies that non-breaking spaces are shown as gray boxes. Non-breaking spaces are not broken at the end of a line and are entered with the Ctrl+Shift+Spacebar shortcut keys.
33 modules%2Fswriter%2Fui%2Foptformataidspage%2Fspaces 42 Specifies whether to represent every space in the text with a dot.
36 modules%2Fswriter%2Fui%2Foptformataidspage%2Fparagraph 79 Specifies whether paragraph delimiters are displayed. The paragraph delimiters also contain paragraph format information.
37 modules%2Fswriter%2Fui%2Foptformataidspage%2Fhiddentext 66 Displays text that uses the character format "hidden", when View - Non-printing Characters is enabled.
39 modules%2Fswriter%2Fui%2Foptformataidspage%2Fcursorinprot 57 Specifies that you can set the cursor in a protected area, but cannot make any changes.
3c modules%2Fswriter%2Fui%2Foptformataidspage%2Fhiddentextfield 47 Displays text that is hidden by Conditional Text or Hidden Text fields.
33 modules%2Fswriter%2Fui%2Foptredlinepage%2Fmarkcolor 43 Specifies the color for highlighting the changed lines in the text.
31 modules%2Fswriter%2Fui%2Foptredlinepage%2Fmarkpos 3e Defines if and where changed lines in the document are marked.
36 modules%2Fswriter%2Fui%2Foptredlinepage%2Fchangedcolor e8 You can also choose a color to display each type of recorded change. When you choose the condition "By author" in the list, the color is automatically determined by $[officename], then modified to match to the author of each change.
38 modules%2Fswriter%2Fui%2Foptredlinepage%2FOptRedLinePage 32 Defines the appearance of changes in the document.
31 modules%2Fswriter%2Fui%2Foptredlinepage%2Fdeleted ca Specifies how changes in the document are displayed when text is deleted. If you record text deletions, the text is displayed with the selected attribute (for example, strikethrough) and is not deleted.
30 modules%2Fswriter%2Fui%2Foptredlinepage%2Finsert 4a Specifies how changes in the document are displayed when text is inserted.
31 modules%2Fswriter%2Fui%2Foptredlinepage%2Fchanged 88 Defines how changes to text attributes are displayed in the document. These changes affect attributes such as bold, italic or underline.
34 modules%2Fswriter%2Fui%2Foptgeneralpage%2Fsquaremode 47 When this setting is enabled, the text grid will look like square page.
35 modules%2Fswriter%2Fui%2Foptgeneralpage%2Fusecharunit 99 When this setting is enabled, the measurement units of indents and spacing on Format - Paragraph - Indents & Spacing tab will be character (ch) and line.
2d modules%2Fswriter%2Fui%2Foptgeneralpage%2Ftab 37 Specifies the spacing between the individual tab stops.
30 modules%2Fswriter%2Fui%2Foptgeneralpage%2Fmetric 35 Specifies the unit of measurement for text documents.
36 modules%2Fswriter%2Fui%2Foptgeneralpage%2Fupdatecharts be Specifies whether to automatically update charts. Whenever a Writer table cell value changes and the cursor leaves that cell, the chart that displays the cell value is updated automatically.
38 modules%2Fswriter%2Fui%2Foptgeneralpage%2FOptGeneralPage 2e Specifies general settings for text documents.
30 modules%2Fswriter%2Fui%2Foptgeneralpage%2Falways 2e Always updates links while loading a document.
33 modules%2Fswriter%2Fui%2Foptgeneralpage%2Fonrequest 37 Updates links only on request while loading a document.
36 modules%2Fswriter%2Fui%2Foptgeneralpage%2Fupdatefields c8 The contents of all fields are updated automatically whenever the screen contents are displayed as new. Even with this box unchecked, some fields are updated each time a special condition takes place.
2f modules%2Fswriter%2Fui%2Foptgeneralpage%2Fnever 31 Links are never updated while loading a document.
30 modules%2Fswriter%2Fui%2Foptcompatpage%2Fdefault 69 Click to use the current settings on this tab page as the default for further sessions with %PRODUCTNAME.
2c SW_CHECKBOX_TP_OPTLOAD_PAGE_CB_TAB_ALIGNMENT 95 Specifies how to align text at tab stops beyond the right margin, how to handle decimal tab stops, and how to handle tab stops close to a line break.
36 modules%2Fswriter%2Fui%2Foptcompatpage%2FOptCompatPage 8c Specifies compatibility settings for text documents. These options help in fine-tuning %PRODUCTNAME when importing Microsoft Word documents.
34 SW%3ACHECKBOX%3ATP_OPTLOAD_PAGE%3ACB_MERGE_PARA_DIST 79 Specifies whether to add MS Word-compatible spacing between paragraphs and tables in $[officename] Writer text documents.
2e SW_CHECKBOX_TP_OPTLOAD_PAGE_CB_PRINTER_METRICS 6a Specifies that printer metrics are applied for printing and also for formatting the display on the screen.
3e SW%3ACHECKBOX%3ATP_OPTLOAD_PAGE%3ACB_MERGE_PARA_DIST_PAGESTART b6 Specifies whether paragraph spacing at the top of a page will also be effective at the beginning of a page or column if the paragraph is positioned on the first page of the document.
35 modules%2Fswriter%2Fui%2Foptcaptionpage%2Fapplyborder 41 Applies the border and shadow of the object to the caption frame.
2f modules%2Fswriter%2Fui%2Foptcaptionpage%2Flevel 4f Specifies the headings or chapter levels where you want the numbering to start.
32 modules%2Fswriter%2Fui%2Foptcaptionpage%2Fposition 42 Determines the position of the caption with respect to the object.
31 modules%2Fswriter%2Fui%2Foptcaptionpage%2Fobjects 4a Select the object type for which the AutoCaption settings are to be valid.
33 modules%2Fswriter%2Fui%2Foptcaptionpage%2Fseparator 57 Defines the character to be displayed after the number of the heading or chapter level.
38 modules%2Fswriter%2Fui%2Foptcaptionpage%2FOptCaptionPage 4a Select the object type for which the AutoCaption settings are to be valid.
33 modules%2Fswriter%2Fui%2Foptcaptionpage%2Fnumbering 29 Specifies the type of numbering required.
33 modules%2Fswriter%2Fui%2Foptcaptionpage%2Fcharstyle 1e Specifies the character style.
37 modules%2Fswriter%2Fui%2Foptcaptionpage%2Fchapseparator 57 Defines the character to be displayed after the number of the heading or chapter level.
32 modules%2Fswriter%2Fui%2Foptcaptionpage%2Fcategory 2e Specifies the category of the selected object.
14 SID_SW_ONLINEOPTIONS 46 Defines the basic settings for $[officename] documents in HTML format.
15 .uno%3AHelplinesFront 2c Sets the snap lines in front of all objects.
24 svx%2Fui%2Foptgridpage%2FOptGridPage cc Specifies the settings for the configurable grid on your document pages. This grid helps you determine the exact position of your objects. You can also set this grid in line with the "magnetic" snap grid.
10 .uno%3AGridFront 2e Sets the visible grid in front of all objects.
24 svx%2Fui%2Foptgridpage%2Fusegridsnap 5a Specifies whether to move frames, drawing elements, and controls only between grid points.
28 svx%2Fui%2Foptgridpage%2Fnumflddivisiony 4c Specify the number of intermediate spaces between grid points on the Y-axis.
28 svx%2Fui%2Foptgridpage%2Fnumflddivisionx 4c Specify the number of intermediate spaces between grid points on the X-axis.
24 svx%2Fui%2Foptgridpage%2Fgridvisible 26 Specifies whether to display the grid.
24 svx%2Fui%2Foptgridpage%2Fsynchronize 44 Specifies whether to change the current grid settings symmetrically.
24 svx%2Fui%2Foptgridpage%2Fmtrflddrawy 51 Defines the grid points spacing in the desired unit of measurement on the Y-axis.
24 svx%2Fui%2Foptgridpage%2Fmtrflddrawx 4e Defines the unit of measure for the spacing between grid points on the X-axis.
13 .uno%3AToolsOptions f4 Defines various settings for spreadsheets, contents to be displayed, and the cursor direction after a cell entry. You can also define sorting lists, determine the number of decimal places and the settings for recording and highlighting changes.
2a modules%2Fscalc%2Fui%2Ftpviewpage%2Ftblreg 56 Specifies whether to display the sheet tabs at the bottom of the spreadsheet document.
30 modules%2Fscalc%2Fui%2Ftpviewpage%2Frowcolheader 34 Specifies whether to display row and column headers.
28 modules%2Fscalc%2Fui%2Ftpviewpage%2Fdraw 40 Defines if drawing objects in your document are shown or hidden.
2b modules%2Fscalc%2Fui%2Ftpviewpage%2Fvscroll 56 Specifies whether to display a vertical scrollbar at the right of the document window.
2b modules%2Fscalc%2Fui%2Ftpviewpage%2Fhscroll 59 Specifies whether to display a horizontal scrollbar at the bottom of the document window.
2a modules%2Fscalc%2Fui%2Ftpviewpage%2Fobjgrf 34 Defines if objects and graphics are shown or hidden.
2d modules%2Fscalc%2Fui%2Ftpviewpage%2Frangefind bf Specifies that each reference is highlighted in color in the formula. The cell range is also enclosed by a colored border as soon as the cell containing the reference is selected for editing.
2a modules%2Fscalc%2Fui%2Ftpviewpage%2Fanchor 67 Specifies whether the anchor icon is displayed when an inserted object, such as a graphic, is selected.
29 modules%2Fscalc%2Fui%2Ftpviewpage%2Fbreak 46 Specifies whether to view the page breaks within a defined print area.
2c modules%2Fscalc%2Fui%2Ftpviewpage%2Fsynczoom 74 If checked, all sheets are shown with the same zoom factor. If not checked, each sheet can have its own zoom factor.
29 modules%2Fscalc%2Fui%2Ftpviewpage%2Fcolor 3d Specifies a color for the grid lines in the current document.
29 modules%2Fscalc%2Fui%2Ftpviewpage%2Fvalue 111 Mark the Value highlighting box to show the cell contents in different colors, depending on type. Text cells are formatted in black, formulas in green, number cells in blue, and protected cells are shown with light grey background, no matter how their display is formatted.
28 modules%2Fscalc%2Fui%2Ftpviewpage%2Fgrid db Specifies when grid lines will be displayed. Default is to display grid lines only on cells that do not have a background color. You can choose to also display grid lines on cells with background color, or to hide them.
2e modules%2Fscalc%2Fui%2Ftpviewpage%2FTpViewPage 86 Defines which elements of the %PRODUCTNAME Calc main window are displayed. You can also show or hide highlighting of values in tables.
2b modules%2Fscalc%2Fui%2Ftpviewpage%2Foutline 84 If you have defined an outline, the Outline symbols option specifies whether to view the outline symbols at the border of the sheet.
2c modules%2Fscalc%2Fui%2Ftpviewpage%2Fclipmark f3 If a cell contains text that is wider than the width of the cell, the text is displayed over empty neighboring cells in the same row. If there is no empty neighboring cell, a small triangle at the cell border indicates that the text continues.
2b modules%2Fscalc%2Fui%2Ftpviewpage%2Fformula 43 Specifies whether to show formulas instead of results in the cells.
2d modules%2Fscalc%2Fui%2Ftpviewpage%2Fguideline 5a Specifies whether to view guides when moving drawings, frames, graphics and other objects.
27 modules%2Fscalc%2Fui%2Ftpviewpage%2Fnil 36 Specifies whether to show numbers with the value of 0.
2b modules%2Fscalc%2Fui%2Ftpviewpage%2Fdiagram 37 Defines if charts in your document are shown or hidden.
12 .uno%3ANoteVisible 5f To display a comment permanently, select the Show comment command from the cell's context menu.
29 modules%2Fscalc%2Fui%2Ftpviewpage%2Fannot d1 Specifies that a small rectangle in the top right corner of the cell indicates that a comment exists. The comment will be shown only when you enable tips under %PRODUCTNAME - General in the Options dialog box.
31 modules%2Fscalc%2Fui%2Fscgeneralpage%2Freplwarncb 6d Specifies that, when you paste cells from the clipboard to a cell range that is not empty, a warning appears.
30 modules%2Fscalc%2Fui%2Fscgeneralpage%2Ftextfmtcb 6a Specifies that printer metrics are applied for printing and also for formatting the display on the screen.
2f modules%2Fscalc%2Fui%2Fscgeneralpage%2Fformatcb 74 Specifies whether to automatically apply the formatting attributes of the selected cell to the empty adjacent cells.
30 modules%2Fscalc%2Fui%2Fscgeneralpage%2Fmarkhdrcb 56 Specifies whether to highlight column and row headers in the selected columns or rows.
2d modules%2Fscalc%2Fui%2Fscgeneralpage%2Funitlb 2c Defines the unit of measure in spreadsheets.
2f modules%2Fscalc%2Fui%2Fscgeneralpage%2Fexprefcb f9 Specifies whether to expand references when inserting columns or rows adjacent to the reference range. This is only possible if the reference range, where the column or row is inserted, originally spanned at least two cells in the desired direction.
31 modules%2Fscalc%2Fui%2Fscgeneralpage%2Feditmodecb 4e Allows you to immediately edit the selected cell after pressing the Enter key.
2c modules%2Fscalc%2Fui%2Fscgeneralpage%2Ftabmf 1f Defines the tab stops distance.
2e modules%2Fscalc%2Fui%2Fscgeneralpage%2Falignlb 64 Determines the direction that the cursor in the spreadsheet will move after you press the Enter key.
2a modules%2Fscalc%2Fui%2Foptsortlists%2Fcopy 10d Copies the contents of the cells in the Copy list from box. If you select a reference to related rows and columns, the Copy List dialog appears after clicking the button. You can use this dialog to define if the reference is converted to sort lists by row or by column.
29 modules%2Fscalc%2Fui%2Foptsortlists%2Fadd 23 Adds a new list into the Lists box.
29 modules%2Fscalc%2Fui%2Foptsortlists%2Fnew 37 Enters the contents of a new list into the Entries box.
32 modules%2Fscalc%2Fui%2Foptsortlists%2FOptSortLists 9c All user-defined lists are displayed in the Sort Lists dialog. You can also define and edit your own lists. Only text can be used as sort lists, no numbers.
2b modules%2Fscalc%2Fui%2Foptsortlists%2Flists 4a Displays all the available lists. These lists can be selected for editing.
2d modules%2Fscalc%2Fui%2Foptsortlists%2Fentries 50 Displays the content of the currently selected list. This content can be edited.
2e modules%2Fscalc%2Fui%2Foptsortlists%2Fcopyfrom 99 Defines the spreadsheet and the cells to copy, in order to include them in the Lists box. The currently selected range in the spreadsheet is the default.
2f modules%2Fscalc%2Fui%2Fcolorrowdialog%2Fcolumns 56 Select the Columns option to summarize the contents of the selected columns in a list.
2c modules%2Fscalc%2Fui%2Fcolorrowdialog%2Frows 50 Select the Rows option to summarize the contents of the selected rows in a list.
36 modules%2Fscalc%2Fui%2Fcolorrowdialog%2FColOrRowDialog 2f Allows you to copy marked cells to a sort list.
2e modules%2Fscalc%2Fui%2Foptcalculatepage%2Fprec ae Defines the number of decimals to be displayed for numbers with the General number format. The numbers are displayed as rounded numbers, but are not saved as rounded numbers.
35 modules%2Fscalc%2Fui%2Foptcalculatepage%2Fgeneralprec dd You can specify the maximum number of decimal places that are shown by default for cells with General number format. If not enabled, cells with General number format show as many decimal places as the column width allows.
2f modules%2Fscalc%2Fui%2Foptcalculatepage%2Fsteps 2b Sets the maximum number of iteration steps.
30 modules%2Fscalc%2Fui%2Foptcalculatepage%2Flookup cc Specifies that you can use the text in any cell as a label for the column below the text or the row to the right of the text. The text must consist of at least one word and must not contain any operators.
3a modules%2Fscalc%2Fui%2Foptcalculatepage%2FOptCalculatePage 32 Defines the calculation settings for spreadsheets.
33 modules%2Fscalc%2Fui%2Foptcalculatepage%2Fminchange ad Specifies the difference between two consecutive iteration step results. If the result of the iteration is lower than the minimum change value, then the iteration will stop.
31 modules%2Fscalc%2Fui%2Foptcalculatepage%2Fiterate b1 Specifies whether formulas with iterative references (formulas that are continuously repeated until the problem is solved) are calculated after a specific number of repetitions.
31 modules%2Fscalc%2Fui%2Foptcalculatepage%2Fdatestd 1c Sets 12/30/1899 as day zero.
32 modules%2Fscalc%2Fui%2Foptcalculatepage%2Fdate1904 63 Sets 1/1/1904 as day zero. Use this setting for spreadsheets that are imported in a foreign format.
2e modules%2Fscalc%2Fui%2Foptcalculatepage%2Fcase 64 Specifies whether to distinguish between upper and lower case in texts when comparing cell contents.
2e modules%2Fscalc%2Fui%2Foptcalculatepage%2Fcalc 11b Specifies whether to make calculations using the rounded values displayed in the sheet. Charts will be shown with the displayed values. If the Precision as shown option is not marked, the displayed numbers are rounded, but they are calculated internally using the non-rounded number.
2f modules%2Fscalc%2Fui%2Foptcalculatepage%2Fregex 68 Specifies that regular expressions are enabled when searching and also for character string comparisons.
32 modules%2Fscalc%2Fui%2Foptcalculatepage%2Fdatesc10 62 Sets 1/1/1900 as day zero. Use this setting for StarCalc 1.0 spreadsheets containing date entries.
2f modules%2Fscalc%2Fui%2Foptcalculatepage%2Fmatch 117 Specifies that the search criteria you set for the Calc database functions must match the whole cell exactly. When the Search criteria = and <> must apply to whole cells box is marked, $[officename] Calc behaves exactly as MS Excel when searching cells in the database functions.
2f modules%2Fscalc%2Fui%2Foptchangespage%2Fentries 35 Specifies the color to highlight moved cell contents.
36 modules%2Fscalc%2Fui%2Foptchangespage%2FOptChangesPage 5c The Changes dialog specifies various options for highlighting recorded changes in documents.
2f modules%2Fscalc%2Fui%2Foptchangespage%2Fchanges 31 Specifies the color for changes of cell contents.
31 modules%2Fscalc%2Fui%2Foptchangespage%2Fdeletions 39 Specifies the color to highlight deletions in a document.
32 modules%2Fscalc%2Fui%2Foptchangespage%2Finsertions 3a Specifies the color to highlight insertions in a document.
27 modules%2Fscalc%2Fui%2Foptdlg%2FprintCB e3 Specifies that only contents from selected sheets are printed, even if you specify a wider range in the File - Print dialog or in the Format - Print Ranges dialog. Contents from sheets that are not selected will not be printed.
2a modules%2Fscalc%2Fui%2Foptdlg%2FsuppressCB 56 Specifies that empty pages that have no cell contents or draw objects are not printed.
30 modules%2Fscalc%2Fui%2Foptdlg%2FoptCalcPrintPage 31 Determines the printer settings for spreadsheets.
42 modules%2Fscalc%2Fui%2Foptcompatibilitypage%2FOptCompatibilityPage 34 Defines compatibility options for %PRODUCTNAME Calc.
2e modules%2Fscalc%2Fui%2Foptformula%2FOptFormula 49 Defines formula syntax options and loading options for %PRODUCTNAME Calc.
36 modules%2Fscalc%2Fui%2Foptdefaultpage%2FOptDefaultPage 37 Defines default settings for new spreadsheet documents.
14 .uno%3ASdEditOptions ad Defines various settings for newly created presentation documents, such as the contents to be displayed, the measurement unit used, if and how grid alignment is carried out.
32 modules%2Fsimpress%2Fui%2Fsdviewpage%2Fmoveoutline 59 %PRODUCTNAME displays the contour line of each individual object when moving this object.
31 modules%2Fsimpress%2Fui%2Fsdviewpage%2FSdViewPage 26 Specifies the available display modes.
32 modules%2Fsimpress%2Fui%2Fsdviewpage%2Fdragstripes 3a Specifies whether to display guides when moving an object.
2c modules%2Fsimpress%2Fui%2Fsdviewpage%2Fruler 54 Specifies whether to display the rulers at the top and to the left of the work area.
34 modules%2Fsimpress%2Fui%2Fsdviewpage%2Fhandlesbezier ec Displays the control points of all Bézier points if you have previously selected a Bézier curve. If the All control points in Bézier editor option is not marked, only the control points of the selected Bézier points will be visible.
27 svx%2Fui%2Foptgridpage%2Fmtrfldbezangle 26 Defines the angle for point reduction.
21 svx%2Fui%2Foptgridpage%2Fbigortho 16b Specifies that a square is created based on the longer side of a rectangle when the Shift key is pressed before you release the mouse button. This also applies to an ellipse (a circle will be created based on the longest diameter of the ellipse). When the Extend edges box is not marked, a square or a circle will be created based on the shorter side or diameter.
1e svx%2Fui%2Foptgridpage%2Fortho 79 Specifies that graphic objects are restricted vertically, horizontally or diagonally (45°) when creating or moving them.
27 svx%2Fui%2Foptgridpage%2Fmtrfldsnaparea cc Defines the snap distance between the mouse pointer and the object contour. $[officename] Impress snaps to a snap point if the mouse pointer is nearer than the distance selected in the Snap range control.
23 svx%2Fui%2Foptgridpage%2Fsnappoints 69 Specifies whether to align the contour of the graphic object to the points of the nearest graphic object.
24 svx%2Fui%2Foptgridpage%2Fmtrfldangle 7c Specifies that graphic objects can only be rotated within the rotation angle that you selected in the When rotating control.
13 HID_SD_OPTIONS_SNAP 3a Defines the grid settings for creating and moving objects.
26 svx%2Fui%2Foptgridpage%2Fsnaphelplines 57 Snaps the edge of a dragged object to the nearest snap line when you release the mouse.
23 svx%2Fui%2Foptgridpage%2Fsnapborder 58 Specifies whether to align the contour of the graphic object to the nearest page margin.
22 svx%2Fui%2Foptgridpage%2Fsnapframe 69 Specifies whether to align the contour of the graphic object to the border of the nearest graphic object.
37 modules%2Fsimpress%2Fui%2Fprntopts%2Fpapertryfrmprntrcb 52 Determines that the paper tray to be used is the one defined in the printer setup.
2b modules%2Fsimpress%2Fui%2Fprntopts%2Fbackcb 2c Select Back to print the back of a brochure.
2c modules%2Fsimpress%2Fui%2Fprntopts%2Ffrontcb 2e Select Front to print the front of a brochure.
2d modules%2Fsimpress%2Fui%2Fprntopts%2Fbrouchrb 44 Select the Brochure option to print the document in brochure format.
2d modules%2Fsimpress%2Fui%2Fprntopts%2Ftilepgrb a8 Specifies that pages are to be printed in tiled format. If the pages or slides are smaller than the paper, several pages or slides will be printed on one page of paper.
2b modules%2Fsimpress%2Fui%2Fprntopts%2Fdatecb 2c Specifies whether to print the current date.
2b modules%2Fsimpress%2Fui%2Fprntopts%2Ftimecb 2c Specifies whether to print the current time.
2d modules%2Fsimpress%2Fui%2Fprntopts%2Fprntopts 43 Specifies print settings within a drawing or presentation document.
2e modules%2Fsimpress%2Fui%2Fprntopts%2Fdefaultrb 34 Specifies that you want to print in original colors.
31 modules%2Fsimpress%2Fui%2Fprntopts%2Fblackwhiterb 41 Specifies that you want to print the document in black and white.
2d modules%2Fsimpress%2Fui%2Fprntopts%2Fpagenmcb 29 Specifies whether to print the page name.
2f modules%2Fsimpress%2Fui%2Fprntopts%2Fhiddenpgcb 55 Specifies whether to print the pages that are currently hidden from the presentation.
2e modules%2Fsimpress%2Fui%2Fprntopts%2Ffittopgrb 89 Specifies whether to scale down objects that are beyond the margins of the current printer, so that they fit on the paper in the printer.
30 modules%2Fsimpress%2Fui%2Fprntopts%2Fgrayscalerb 35 Specifies that you want to print colors as grayscale.
32 modules%2Fsimpress%2Fui%2Fprntopts%2Fpagedefaultrb 44 Specifies that you do not want to further scale pages when printing.
41 modules%2Fsimpress%2Fui%2Foptimpressgeneralpage%2FcbCompatibility 68 Specifies that $[officename] Impress calculates the paragraph spacing exactly like Microsoft PowerPoint.
3d modules%2Fsimpress%2Fui%2Foptimpressgeneralpage%2Fenremotcont 54 Specifies that you want to enable Bluetooth remote control while Impress is running.
10 .uno%3AQuickEdit 6e If on, you can edit text immediately after clicking a text object. If off, you must double-click to edit text.
12 .uno%3APickThrough 3e Specifies whether to select a text frame by clicking the text.
3a modules%2Fsimpress%2Fui%2Foptimpressgeneralpage%2FscaleBox 2b Determines the drawing scale on the rulers.
3d modules%2Fsimpress%2Fui%2Foptimpressgeneralpage%2FOptSavePage 42 Defines the general options for drawing or presentation documents.
41 modules%2Fsimpress%2Fui%2Foptimpressgeneralpage%2Fstartwithwizard 64 Specifies whether to activate the Wizard when opening a presentation with File - New - Presentation.
40 modules%2Fsimpress%2Fui%2Foptimpressgeneralpage%2Fbackgroundback 4d Specifies whether to use the cache for displaying objects on the master page.
3e modules%2Fsimpress%2Fui%2Foptimpressgeneralpage%2Fcopywhenmove 56 If enabled, a copy is created when you move an object while holding down the Ctrl key.
3e modules%2Fsimpress%2Fui%2Foptimpressgeneralpage%2FmetricFields 26 Defines the spacing between tab stops.
3a modules%2Fsimpress%2Fui%2Foptimpressgeneralpage%2Fqickedit 6e If on, you can edit text immediately after clicking a text object. If off, you must double-click to edit text.
3b modules%2Fsimpress%2Fui%2Foptimpressgeneralpage%2Fdistrotcb 70 Maintains relative alignment of Bézier points and 2D drawing objects to each other when you distort the object.
3c modules%2Fsimpress%2Fui%2Foptimpressgeneralpage%2Fobjalwymov a6 Specifies that you want to move an object with the Rotate tool enabled. If Object always moveable is not marked, the Rotate tool can only be used to rotate an object.
37 modules%2Fsimpress%2Fui%2Foptimpressgeneralpage%2Funits 35 Determines the Unit of measurement for presentations.
17 .uno%3ASdGraphicOptions ae Defines the global settings for drawing documents, including the contents to be displayed, the scale to be used, the grid alignment and the contents to be printed by default.
14 .uno%3ASmEditOptions 97 Defines the print format and print options for all new formula documents. These options apply when you print a formula directly from %PRODUCTNAME Math.
34 modules%2Fsmath%2Fui%2Fsmathsettings%2Fnorightspaces 56 Specifies that these space wildcards will be removed if they are at the end of a line.
2b modules%2Fsmath%2Fui%2Fsmathsettings%2Fzoom 56 Reduces or enlarges the size of the printed formula by a specified enlargement factor.
31 modules%2Fsmath%2Fui%2Fsmathsettings%2Fsizescaled 3c Adjusts the formula to the page format used in the printout.
d tobeannounced 49 Saves only those symbols with each formula that are used in that formula.
31 modules%2Fsmath%2Fui%2Fsmathsettings%2Fsizenormal 3b Prints the formula without adjusting the current font size.
34 modules%2Fsmath%2Fui%2Fsmathsettings%2FSmathSettings 3e Defines formula settings that will be valid for all documents.
2b modules%2Fsmath%2Fui%2Fsmathsettings%2Ftext 5f Specifies whether to include the contents of the Commands window at the bottom of the printout.
2c modules%2Fsmath%2Fui%2Fsmathsettings%2Ftitle 53 Specifies whether you want the name of the document to be included in the printout.
2c modules%2Fsmath%2Fui%2Fsmathsettings%2Fframe 3a Applies a thin border to the formula area in the printout.
27 cui%2Fui%2Foptchartcolorspage%2Fdefault 4d Restores the color settings that were defined when the program was installed.
26 cui%2Fui%2Foptchartcolorspage%2Fcolors 36 Displays all the colors available for the data series.
24 cui%2Fui%2Foptfltrpage%2FOptFltrPage 81 Specifies the general properties for loading and saving Microsoft Office documents with VBA (Visual Basic for Applications) code.
21 cui%2Fui%2Foptfltrpage%2Fwo_basic d8 Loads and saves the Basic code from a Microsoft document as a special $[officename] Basic module with the document. The disabled Microsoft Basic code is visible in the $[officename] Basic IDE between Sub and End Sub.
24 cui%2Fui%2Foptfltrpage%2Fwo_saveorig 120 Specifies that the original Microsoft Basic code contained in the document is held in a special internal memory for as long as the document remains loaded in $[officename]. When saving the document in Microsoft format the Microsoft Basic is saved again with the code in an unchanged form.
20 cui%2Fui%2Foptfltrpage%2Fex_exec bf The VBA (Visual Basic for Applications) code will be loaded ready to be executed. If this checkbox is not checked, the VBA code will be commented out so it can be inspected, but will not run.
20 cui%2Fui%2Foptfltrpage%2Fwo_exec bf The VBA (Visual Basic for Applications) code will be loaded ready to be executed. If this checkbox is not checked, the VBA code will be commented out so it can be inspected, but will not run.
2e cui%2Fui%2Foptfltrembedpage%2Fchecklbcontainer ad The List Box field displays the entries for the pair of OLE objects that can be converted when loading into $[officename] (L) and/or when saving into a Microsoft format (S).
2a cui%2Fui%2Foptlanguagespage%2Fasiansupport 70 Activates Asian languages support. You can now modify the corresponding Asian language settings in %PRODUCTNAME.
2b cui%2Fui%2Foptlanguagespage%2Fuserinterface c3 Select the language used for the user interface, for example menus, dialogs, help files. You must have installed at least one additional language pack or a multi-language version of %PRODUCTNAME.
2b cui%2Fui%2Foptlanguagespage%2Flocalesetting 7b Specifies the locale setting of the country setting. This influences settings for numbering, currency and units of measure.
28 cui%2Fui%2Foptlanguagespage%2Fcurrencylb 5c Specifies the default currency that is used for the currency format and the currency fields.
28 cui%2Fui%2Foptlanguagespage%2Fctlsupport 7c Activates complex text layout support. You can now modify the settings corresponding to complex text layout in %PRODUCTNAME.
2d cui%2Fui%2Foptlanguagespage%2Fwesternlanguage 4d Specifies the language used for the spellcheck function in western alphabets.
2a cui%2Fui%2Foptlanguagespage%2Fdatepatterns cd Specifies the date acceptance patterns for the current locale. Calc spreadsheet and Writer table cell input needs to match locale dependent date acceptance patterns before it is recognized as a valid date.
28 cui%2Fui%2Foptlanguagespage%2Fcurrentdoc 5a Specifies that the settings for default languages are valid only for the current document.
2e cui%2Fui%2Foptlanguagespage%2Fdecimalseparator 7a Specifies to use the decimal separator key that is set in your system when you press the respective key on the number pad.
2e cui%2Fui%2Foptlanguagespage%2FOptLanguagesPage 4b Defines the default languages and some other locale settings for documents.
2b cui%2Fui%2Foptlanguagespage%2Fasianlanguage 4b Specifies the language used for the spellcheck function in Asian alphabets.
32 cui%2Fui%2Foptlanguagespage%2Fignorelanguagechange dd Indicates whether changes to the system input language/keyboard will be ignored. If ignored, when new text is typed that text will follow the language of the document or current paragraph, not the current system language.
2d cui%2Fui%2Foptlanguagespage%2Fcomplexlanguage 3e Specifies the language for the complex text layout spellcheck.
1f cui%2Fui%2Foptasianpage%2Fstart 51 Specifies the characters that should not appear alone at the beginning of a line.
2e cui%2Fui%2Foptasianpage%2Fpunctkanacompression 3c Specifies that punctuation and Japanese Kana are compressed.
25 cui%2Fui%2Foptasianpage%2Fcharkerning 37 Specifies that kerning is only applied to western text.
1d cui%2Fui%2Foptasianpage%2Fend 4b Specifies the characters that should not appear alone at the end of a line.
22 cui%2Fui%2Foptasianpage%2Fstandard 75 When you mark Default, the following two text boxes are filled with the default characters for the selected language:
2a cui%2Fui%2Foptasianpage%2Fcharpunctkerning 4d Specifies that kerning is applied to both western text and Asian punctuation.
22 cui%2Fui%2Foptasianpage%2Flanguage 4e Specifies the language for which you want to define first and last characters.
2a cui%2Fui%2Foptasianpage%2Fpunctcompression 32 Specifies that only the punctuation is compressed.
27 cui%2Fui%2Foptasianpage%2Fnocompression 30 Specifies that no compression at all will occur.
2b cui%2Fui%2Foptjsearchpage%2Fignoremiddledot 27 Specifies the characters to be ignored.
33 cui%2Fui%2Foptjsearchpage%2Fmatchprolongedsoundmark 39 Specifies the options to be treated as equal in a search.
26 cui%2Fui%2Foptctlpage%2Fmovementvisual 9d Pressing the Right Arrow key moves the text cursor in the right-hand direction. Pressing the Left Arrow key moves the text cursor in the left-hand direction.
22 cui%2Fui%2Foptctlpage%2FOptCTLPage 3c Defines the options for documents with complex text layouts.
28 cui%2Fui%2Foptctlpage%2Fsequencechecking 3b Enables sequence input checking for languages such as Thai.
20 cui%2Fui%2Foptctlpage%2Fnumerals ac Selects the type of numerals used within text, text in objects, fields, and controls, in all %PRODUCTNAME modules. Only cell contents of %PRODUCTNAME Calc are not affected.
22 cui%2Fui%2Foptctlpage%2Frestricted 4b Prevents the use as well as the printing of illegal character combinations.
27 cui%2Fui%2Foptctlpage%2Fmovementlogical b2 Pressing the Right Arrow key moves the text cursor toward the end of the current text. Pressing the Left Arrow key moves the text cursor toward the beginning of the current text.
24 cui%2Fui%2Fconnpooloptions%2Ftimeout 45 Defines the time in seconds after which a pooled connection is freed.
2a cui%2Fui%2Fconnpooloptions%2Fenablepooling 73 Select a driver from the list and mark the Enable pooling for this driver checkbox in order to pool its connection.
2e cui%2Fui%2Fconnpooloptions%2Fconnectionpooling 34 Specifies whether the chosen connections are pooled.
9 809226766 3a Opens the Database Link dialog to edit the selected entry.
9 809226770 29 Removes the selected entry from the list.
9 809226765 35 Opens the Database Link dialog to create a new entry.
5 35535 67 Lists the registered name and database file of all registered databases. Double-click an entry to edit.
24 cui%2Fui%2Fdatabaselinkdialog%2Fname 52 Enter a name for the database. %PRODUCTNAME uses this name to access the database.
26 cui%2Fui%2Fdatabaselinkdialog%2Fbrowse 3b Opens a file dialog where you can select the database file.
31 cui%2Fui%2Foptbasicidepage%2Fextendedtypes_enable 2c Allow UNO object types as valid Basic types.
2b cui%2Fui%2Foptbasicidepage%2Fautoclose_proc 37 Automatically insert closing statements for procedures.
30 cui%2Fui%2Foptbasicidepage%2Fcodecomplete_enable 22 Display methods of a Basic object.
2d cui%2Fui%2Foptbasicidepage%2Fautoclose_quotes 20 Automatically close open quotes.
28 cui%2Fui%2Foptbasicidepage%2Fautocorrect 3b Correct cases of Basic variables and keywords while typing.
2c cui%2Fui%2Foptbasicidepage%2Fautoclose_paren 25 Automatically close open parenthesis.
29 cui%2Fui%2Foptadvancedpage%2Fexpertconfig 5e Opens the Expert Configuration dialog for advanced settings and configuration of %PRODUCTNAME.
29 cui%2Fui%2Foptadvancedpage%2Fexperimental 1c Enable experimental features
26 cui%2Fui%2Foptadvancedpage%2Fclasspath 1c Opens the Class Path dialog.
28 cui%2Fui%2Foptadvancedpage%2Fjavaenabled 34 Allows you to run Java applications in %PRODUCTNAME.
20 cui%2Fui%2Foptadvancedpage%2Fadd 38 Add a path to the root folder of a JRE on your computer.
22 cui%2Fui%2Foptadvancedpage%2Fjavas b7 Select the JRE that you want to use. On some systems, you must wait a minute until the list gets populated. On some systems, you must restart %PRODUCTNAME to use your changed setting.
2b cui%2Fui%2Foptadvancedpage%2Fmacrorecording 16 Enable macro recording
27 cui%2Fui%2Foptadvancedpage%2Fparameters 27 Opens the Java Start Parameters dialog.
24 cui%2Fui%2Faboutconfigdialog%2Freset 28 Undo changes done so far in this dialog.
23 cui%2Fui%2Faboutconfigdialog%2Fedit 26 Opens a dialog to edit the preference.
2a cui%2Fui%2Faboutconfigdialog%2Fpreferences 3f List the preferences organized hierarchically in a tree layout.
2a cui%2Fui%2Faboutconfigdialog%2FsearchEntry 38 Type the preference you want to display in the text area
29 cui%2Fui%2Foptadvancedpage%2Fexpertconfig 5e Opens the Expert Configuration dialog for advanced settings and configuration of %PRODUCTNAME.
2b cui%2Fui%2Faboutconfigdialog%2FsearchButton 3d Click to search your preference text in the Preferences tree.
27 cui%2Fui%2Fjavaclasspathdialog%2Ffolder 35 Select a folder and add the folder to the class path.
28 cui%2Fui%2Fjavaclasspathdialog%2Farchive 4f Select an archive file in jar or zip format and add the file to the class path.
27 cui%2Fui%2Fjavaclasspathdialog%2Fremove 64 Select an archive or a folder in the list and click Remove to remove the object from the class path.
30 SVX_EDIT_RID_SVXPAGE_INET_SCRIPTING_ED_CLASSPATH 3f Specifies the location of Java classes or Java class libraries.
30 cui%2Fui%2Fjavastartparametersdialog%2Fremovebtn 29 Deletes the selected JRE start parameter.
30 cui%2Fui%2Fjavastartparametersdialog%2Fassignbtn 31 Adds the current JRE start parameter to the list.
31 cui%2Fui%2Fjavastartparametersdialog%2Fassignlist 72 Lists the assigned JRE start parameters. To remove a start parameter, select the parameter, and then click Remove.
35 cui%2Fui%2Fjavastartparametersdialog%2Fparameterfield 8e Enter a start parameter for a JRE as you would on a command line. Click Assign to add the parameter to the list of available start parameters.
33 xmlsec%2Fui%2Fsecuritylevelpage%2FSecurityLevelPage 7c Trusted file locations can be set on the Trusted Sources tab page. Any macro from a trusted file location is allowed to run.
27 xmlsec%2Fui%2Fsecuritylevelpage%2Fvhigh 7c Trusted file locations can be set on the Trusted Sources tab page. Any macro from a trusted file location is allowed to run.
26 xmlsec%2Fui%2Fsecuritylevelpage%2Fhigh bf Trusted sources can be set on the Trusted Sources tab page. Only signed macros from a trusted source are allowed to run. In addition, any macro from a trusted file location is allowed to run.
25 xmlsec%2Fui%2Fsecuritylevelpage%2Flow c5 A macro can be set to auto-start, and it can perform potentially damaging actions, as for example delete or rename files. This setting is not recommended when you open documents from other authors.
25 xmlsec%2Fui%2Fsecuritylevelpage%2Fmed e6 Trusted sources can be set on the Trusted Sources tab page. Signed macros from a trusted source are allowed to run. In addition, any macro from a trusted file location is allowed to run. All other macros require your confirmation.
2c xmlsec%2Fui%2Fsecuritytrustpage%2Fremovefile 44 Removes the selected folder from the list of trusted file locations.
29 xmlsec%2Fui%2Fsecuritytrustpage%2Faddfile 5e Opens a folder selection dialog. Select a folder from which all macros are allowed to execute.
2b xmlsec%2Fui%2Fsecuritytrustpage%2Flocations 5f Document macros are only executed if they have been opened from one of the following locations.
33 xmlsec%2Fui%2Fsecuritytrustpage%2FSecurityTrustPage 1f Lists the trusted certificates.
2a xmlsec%2Fui%2Fsecuritytrustpage%2Fviewcert 3f Opens the View Certificate dialog for the selected certificate.
2c xmlsec%2Fui%2Fsecuritytrustpage%2Fremovecert 47 Removes the selected certificate from the list of trusted certificates.
2e xmlsec%2Fui%2Fsecuritytrustpage%2Fcertificates 1f Lists the trusted certificates.
2e modules%2Fswriter%2Fui%2Fmailconfigpage%2Ftest 44 Opens the Test Account Settings dialog to test the current settings.
2e modules%2Fswriter%2Fui%2Fmailconfigpage%2Fport 14 Enter the SMTP port.
31 modules%2Fswriter%2Fui%2Fmailconfigpage%2Freplyto 2c Enter the address to use for e-mail replies.
3e modules%2Fswriter%2Fui%2Fmailconfigpage%2Fserverauthentication 72 Opens the Server Authentication dialog where you can specify the server authentication settings for secure e-mail.
30 modules%2Fswriter%2Fui%2Fmailconfigpage%2Fsecure 39 When available, uses a secure connection to send e-mails.
38 modules%2Fswriter%2Fui%2Fmailconfigpage%2FMailConfigPage 10 Enter your name.
35 modules%2Fswriter%2Fui%2Fmailconfigpage%2Fdisplayname 10 Enter your name.
31 modules%2Fswriter%2Fui%2Fmailconfigpage%2Faddress 26 Enter your e-mail address for replies.
30 modules%2Fswriter%2Fui%2Fmailconfigpage%2Fserver 1b Enter the SMTP server name.
33 modules%2Fswriter%2Fui%2Fmailconfigpage%2Freplytocb 64 Uses the e-mail address that you enter in the Reply address text box as the reply-to e-mail address.
29 cui%2Fui%2Foptonlineupdatepage%2Fchecknow 1e A check will be performed now.
2b cui%2Fui%2Foptonlineupdatepage%2Feverymonth 27 A check will be performed once a month.
29 cui%2Fui%2Foptonlineupdatepage%2Feveryday 25 A check will be performed once a day.
34 cui%2Fui%2Foptonlineupdatepage%2FOptOnlineUpdatePage 82 Mark to check for online updates periodically, then select the time interval how often %PRODUCTNAME will check for online updates.
2a cui%2Fui%2Foptonlineupdatepage%2Fautocheck 82 Mark to check for online updates periodically, then select the time interval how often %PRODUCTNAME will check for online updates.
2a cui%2Fui%2Foptonlineupdatepage%2Feveryweek 43 A check will be performed once a week. This is the default setting.
29 cui%2Fui%2Fselect_persona_dialog%2Fframe4 56 Shows a random choice of nine themes based on the categories displayed in the buttons.
2b cui%2Fui%2Fpersonalization_tab%2Fno_persona 5e The toolbars background inherit the background settings of the window manager of your desktop.
30 cui%2Fui%2Fpersonalization_tab%2Fdefault_persona 27 Display the system theme, if available.
2c cui%2Fui%2Fpersonalization_tab%2Fown_persona 56 Choose this option to open the Select Firefox Theme dialog for more choices of themes.
2e cui%2Fui%2Fselect_persona_dialog%2Fsearch_term 4e Type or paste the URL of the theme page of the Mozilla Firefox themes website.
42 modules%2Fswriter%2Fui%2Fauthenticationsettingsdialog%2Finpassword 13 Enter the password.
42 modules%2Fswriter%2Fui%2Fauthenticationsettingsdialog%2Finusername 28 Enter the user name for the IMAP server.
40 modules%2Fswriter%2Fui%2Fauthenticationsettingsdialog%2Fusername 28 Enter the user name for the SMTP server.
3e modules%2Fswriter%2Fui%2Fauthenticationsettingsdialog%2Fserver 38 Enter the server name of your POP 3 or IMAP mail server.
46 modules%2Fswriter%2Fui%2Fauthenticationsettingsdialog%2Fauthentication 43 Enables the authentication that is required to send e-mail by SMTP.
54 modules%2Fswriter%2Fui%2Fauthenticationsettingsdialog%2FAuthenticationSettingsDialog 43 Enables the authentication that is required to send e-mail by SMTP.
43 modules%2Fswriter%2Fui%2Fauthenticationsettingsdialog%2Foutpassword 25 Enter the password for the user name.
3c modules%2Fswriter%2Fui%2Fauthenticationsettingsdialog%2Fport 2a Enter the port on the POP3 or IMAP server.
3c modules%2Fswriter%2Fui%2Fauthenticationsettingsdialog%2Fpop3 33 Specifies that the incoming mail server uses POP 3.
4e modules%2Fswriter%2Fui%2Fauthenticationsettingsdialog%2Fseparateauthentication 3d Select if your SMTP server requires a user name and password.
44 modules%2Fswriter%2Fui%2Fauthenticationsettingsdialog%2Fsmtpafterpop 50 Select if you are required to first read your e-mail before you can send e-mail.
3c modules%2Fswriter%2Fui%2Fauthenticationsettingsdialog%2Fimap 32 Specifies that the incoming mail server uses IMAP.
30 modules%2Fswriter%2Fui%2Ftestmailsettings%2Fstop 36 Click the Stop button to stop a test session manually.
32 modules%2Fswriter%2Fui%2Ftestmailsettings%2Ferrors 68 In the Errors list box you can read an explanation of any errors encountered while testing the settings.
3c modules%2Fswriter%2Fui%2Ftestmailsettings%2FTestMailSettings 68 In the Errors list box you can read an explanation of any errors encountered while testing the settings.
21 xmlsec%2Fui%2Fcertpage%2FCertPage 71 The Certificate Path page of the View Certificate dialog displays the location and the status of the certificate.
1f xmlsec%2Fui%2Fcertpage%2Fstatus 71 The Certificate Path page of the View Certificate dialog displays the location and the status of the certificate.
23 xmlsec%2Fui%2Fcertpage%2Fsignatures 71 The Certificate Path page of the View Certificate dialog displays the location and the status of the certificate.
2d xmlsecurity%2Fui%2Fcertdetails%2Fvaluedetails 45 Use the value list box to view values and copy them to the clipboard.
2c xmlsecurity%2Fui%2Fcertdetails%2FCertDetails 64 The Details page of the View Certificate dialog displays detailed information about the certificate.
2f xmlsecurity%2Fui%2Fcertdetails%2Ftablecontainer 64 The Details page of the View Certificate dialog displays detailed information about the certificate.
21 XMLSECURITY_HID_XMLSEC_TP_GENERAL 61 The General page of the View Certificate dialog displays basic information about the certificate.