/usr/share/elmerfront/tcl/ecif_tk_procsPanelCheck.tcl is in elmer-common 6.1.0.svn.5396.dfsg2-4ubuntu4.
This file is owned by root:root, with mode 0o644.
The actual contents of the file can be viewed below.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765 766 767 768 769 770 771 772 773 774 775 776 777 778 779 780 781 782 783 784 785 786 787 788 789 790 791 792 793 794 795 796 797 798 799 800 801 802 803 804 805 806 807 808 809 810 811 812 813 814 815 816 817 818 819 820 821 822 823 824 825 826 827 828 829 830 831 832 833 834 835 836 837 838 839 840 841 842 843 844 845 846 847 848 849 850 851 852 853 854 855 856 857 858 859 860 861 862 863 864 865 866 867 868 869 870 871 872 873 874 875 876 877 878 879 880 881 882 883 884 885 886 887 888 889 890 891 892 893 894 895 896 897 898 899 900 901 902 903 904 905 906 907 908 909 910 911 912 913 914 915 916 917 918 919 920 921 922 923 924 925 926 927 928 929 930 931 932 933 934 935 936 937 938 939 940 941 942 943 944 945 946 947 948 949 950 951 952 953 954 955 956 957 958 959 960 961 962 963 964 965 966 967 968 969 970 971 972 973 974 975 976 977 978 979 980 981 982 983 984 985 986 987 988 989 990 991 992 993 994 995 996 997 998 999 1000 1001 1002 1003 1004 1005 1006 1007 1008 1009 1010 1011 1012 1013 1014 1015 1016 1017 1018 1019 | #/*****************************************************************************/
# *
# * Elmer, A Finite Element Software for Multiphysical Problems
# *
# * Copyright 1st April 1995 - , CSC - IT Center for Science Ltd., Finland
# *
# * This program is free software; you can redistribute it and/or
# * modify it under the terms of the GNU General Public License
# * as published by the Free Software Foundation; either version 2
# * of the License, or (at your option) any later version.
# *
# * This program is distributed in the hope that it will be useful,
# * but WITHOUT ANY WARRANTY; without even the implied warranty of
# * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# * GNU General Public License for more details.
# *
# * You should have received a copy of the GNU General Public License
# * along with this program (in file fem/GPL-2); if not, write to the
# * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
# * Boston, MA 02110-1301, USA.
# *
# *****************************************************************************/
#***********************************************************************
#Program: ELMER Front
#Module: ecif_tk_procsPanelCheck.tcl
#Language: Tcl
#Date: 05.10.98
#Version: 1.00
#Author(s): Martti Verho
#Revisions:
#
#Abstract: Panel checking procedures.
#
#************************************************************************
##############################
### Field values checking ####
##############################
# Check one field
#
# NOTE: This is a "stand alone" function, which gives
# its own error msg boxes etc.
# Do NOT call it from PanelCheck::checkFields !!!
#
proc PanelCheck::checkField {globArray fld} {
global Info
upvar #0 $globArray theArray
if { !$theArray($fld,act) } {
return ""
}
set msg [PanelCheck::checkFieldValue $globArray $fld]
#-Possible Error messages
if {$msg != ""} {
set label [DataField::getFieldProperty $globArray $fld Label]
lappend totmsg [string toupper $label]
lappend totmsg "\n\n$msg"
set Info(messageIcon) error
Message::dispOkMessage $totmsg "$Info(FRONT_NAME) message!" $theArray(winName)
set theArray($fld,err) 1
return $msg
}
set theArray($fld,err) 0
return ""
}
# Starts data checking in the panel referred by globArray.
# Each field should have a field-type indicator like InitialCondition(TEMP,"S")
# for: a scalar field in the TEMP-variable field in the init cond panel.
#NOTE: Checking of vectors should be more general (length as param. etc)
#
proc PanelCheck::checkFields {globArray {fields ""} } {
global Common Info
upvar #0 $globArray theArray
set totmsg ""
if { $fields == "" } {
set fields $theArray(allFields)
}
#-Check each field
foreach fld $fields {
if { !$theArray($fld,act) } {
continue
}
set msg [PanelCheck::checkFieldValue $globArray $fld]
#-Field error messages are collected!
if { $msg != "" } {
set theArray($fld,err) 1
set label [DataField::getFieldProperty $globArray $fld Label]
lappend totmsg "\n"
lappend totmsg [string toupper "$label"]
lappend totmsg "\n$msg\n"
#-Field Ok
} else {
set theArray($fld,err) 0
}
}
#-Ok (no msg-variable was created!)
if { $totmsg == "" } {
return 1
#-Error message is displayed
} else {
set totmsg [linsert $totmsg 0 $Info(fieldMsg)]
set Info(messageIcon) error
Message::dispOkMessage $totmsg \
"$Info(FRONT_NAME) message" \
$theArray(winName)
return 0
}
}
# Check data value for one field
#
proc PanelCheck::checkFieldValue {globArray fld} {
global Common Info
upvar #0 $globArray theArray
# If not screen field, just run possible check proc for the field
#
if { ![Panel::isCheckableDataField $globArray $fld] } {
set msg [PanelCheck::evalFieldCheckProc $globArray $fld]
return $msg
}
set theArray($fld) [string trim $theArray($fld)]
# Update data type if scalar value
if { ( ![info exists theArray($fld,proc)] || !$theArray($fld,proc) ) &&
( ![info exists theArray($fld,table)] || !$theArray($fld,table) )
} {
set theArray($fld,valueData) $theArray($fld)
}
set theArray($fld,matc) ""
# Find field properties
# =====================
set fvtype [DataField::getFieldProperty $globArray $fld FieldValueType]
set frmt [DataField::getFieldProperty $globArray $fld FieldFormat]
set min_max_sizes ""
lappend min_max_sizes [DataField::getFieldProperty $globArray $fld MinDataSize1]
lappend min_max_sizes [DataField::getFieldProperty $globArray $fld MaxDataSize1]
lappend min_max_sizes [DataField::getFieldProperty $globArray $fld MinDataSize2]
lappend min_max_sizes [DataField::getFieldProperty $globArray $fld MaxDataSize2]
set needed_level [Panel::getFieldNeededLevel $globArray $fld]
set range ""
set valueset ""
set tmp [DataField::getFieldProperty $globArray $fld Limits]
if { "Interval" == [lindex $tmp 0] } {
set range [lindex $tmp 1]
} elseif { "Set" == [lindex $tmp 0] } {
set valueset [lindex $tmp 1]
}
set accept_scalar 1
set fdtype [DataField::getFieldProperty $globArray $fld FieldDataType]
if { $fdtype == "Array" } {
set accept_scalar 0
}
# Default value type is numeric
set value_type "nbr"
#-A Matc-script
if { "$" == [string index $theArray($fld) 0] } {
#-If second character is $, send field to Sif as it is
#
if { "$" == [string index [string trim [string range $theArray($fld) 1 end] ] 0] } {
set msg ""
return
#-If next four non-blank characters are MATC, send field to Sif as it is
#
} elseif { "MATC" == [string toupper [string range [string trim [string range $theArray($fld) 1 end] ] 0 3 ] ] } {
set mc_val [string trim [string range $theArray($fld) 1 end]]
set mc_val [string trim [string range $mc_val 4 end]]
if { "\"" == [string index $mc_val 0] } {
set mc_val [string replace $mc_val 0 0 "\'"]
}
if { "\"" == [string index $mc_val end] } {
set mc_val [string replace $mc_val end end "\'"]
}
# Format $MATC-field
set theArray($fld) "\$MATC "
append theArray($fld) $mc_val
set msg ""
return
#-Otherwise send field to be evaluated by Front
#
} else {
set theArray($fld,matc) $theArray($fld)
set theArray($fld) [string range $theArray($fld) 1 end]
set value_type "matc"
}
#-File name
} elseif { $fvtype == "File" ||
( [info exists theArray($fld,file)] &&
$theArray($fld,file)
)
} {
set value_type "file"
#-Directory name
} elseif { $fvtype == "Directory" } {
set value_type "dir"
#-String
} elseif { $fvtype == "String" } {
set value_type "str"
#-Procedure name
} elseif { $fvtype == "Procedure" ||
( [info exists theArray($fld,proc)] &&
$theArray($fld,proc)
)
} {
set value_type "proc"
#-Library name
} elseif { $fvtype == "Library" } {
set value_type "lib"
#-Function name
} elseif { $fvtype == "Function" } {
set value_type "func"
#-Variable name
} elseif { $fvtype == "Variable" } {
set value_type "var"
}
# If field need special handling to read the data
if { [info exists Common($globArray,$fld,widget2DataProc)] } {
Util::execArrayProc $globArray $fld,widget2DataProc
}
# Start checking
# ==============
set msg ""
set value $theArray($fld)
# Pick possible variable and size description
set description [DataField::extractVariableAndSizeDescription cleaned $value]
set theArray($fld) $cleaned
set check 1
set dtype ""
set msg [DataField::setVariableAndSizeValues $globArray $fld $dtype $description $check]
# If error in description
if { $msg != "" } {
set theArray($fld,variables) $description
set theArray($fld,dataSize) ""
lappend totmsg "$msg"
}
# Possible variable values size in one entry
if { [info exist theArray($fld,variables)] } {
set var_size [llength [split $theArray($fld,variables) $Info(dataListSeparator)]]
} else {
set var_size 0
}
# Data item size in one entry
# NOTE: Use this call, because it converts DIM-like defs into
# numeric values
set data_size [DataField::getFieldSize $globArray $fld]
# Call check proc for the field
# =============================
set res_value ""
set msg [DataField::checkValue res_value res_size $theArray($fld) $frmt $value_type \
$needed_level $range $valueset $var_size $data_size $accept_scalar \
$min_max_sizes]
set res_value [string trim $res_value]
# If ok
# =====
if {$msg == ""} {
set msg [PanelCheck::evalFieldCheckProc $globArray $fld]
#--Finally data is Ok and can be stored to the field!!!
#
if { $msg == "" } {
set theArray($fld) $res_value
#set s1 [lindex [lindex $res_size 0] end]
#set s2 [lindex [lindex $res_size 1] end]
#set theArray($fld,dataSize) [list $s1 $s2]
set theArray($fld,dataSize) [lindex [lindex $res_size 0] end]
set theArray($fld,nofEntries) [lindex $res_size end]
}
}
return $msg
}
# Run possible field-specific check-proc
#
proc PanelCheck::evalFieldCheckProc {globArray fld} {
set pn $globArray
append pn "($fld,checkProc)"
if { "" != [namespace eval :: info procs $pn] } {
set msg [eval $pn]
}
return ""
}
#-Procedure checks vector-type group field data
#
proc Common(VectorGroup,checkProc) {globArray var} {
upvar #0 $globArray theArray
global Common Info
set result ""
set glist $Common($globArray,$var,group)
set frmt [DataField::getFieldProperty $globArray $var FieldFormat]
set ndl [DataField::getFieldProperty $globArray $var NeededLevel]
set procedure 0
if { [info exist theArray($var,proc)] } {
set procedure $theArray($var,proc)
}
#--Data is for a procedure name
# It is put to the first field(index 0), like BoundaryCondition(VELOCITY,VELX)
if {$procedure} {
set fn_fld [lindex $glist 0]
set msg [DataField::checkValue res_val res_size $theArray($fn_fld) "" "proc" $ndl]
if {$msg == ""} {
set theArray($fn_fld) $res_val
set theArray($var,proc) 1
}
set result $msg
#--All velocity fields are read as numbers
# NOTE: currently fields are supposed to be scalar-valued
} else {
foreach v $glist {
set ndl [DataField::getFieldProperty $globArray $var NeededLevel]
set msg [DataField::checkValue res_val res_size $theArray($v) $frmt "nbr" $ndl]
if {$msg == ""} {
set theArray($v) $res_val
} else {
lappend result [append [append $v ": "] $msg]
}
}
}
return $result
}
# Runs field specific check procs (for cross checking, widget states etc.)
# which are called when a field is filled with data
# NOTE: These are not tied to any button, but they are "panel wide"
# Check procs are called in the format:
# BoundaryCondition(RADIATION,fillProc)
# These proc are mostly in StdPanelCheck-file
#
proc PanelCheck::execPanelFillProcs {globArray} {
global Common
upvar #0 $globArray theArray
foreach fld $theArray(allFields) {
# Only active fields for the case must be
# checked!
if { ![info exists theArray($fld,trg)] || !$theArray($fld,trg) } {
continue
}
PanelCheck::execFillProc $globArray $fld
}
}
# Call check procs for group fields
#
proc PanelCheck::execPanelGroupEditProcs {globArray} {
global Common $globArray
upvar #0 $globArray theArray
foreach var $theArray(allFields) {
# Only problem fields are interesting
if { ![info exists theArray($fld,prb)] || !$theArray($fld,prb) } {
continue
}
if {"" != [array names $globArray "$var,groupEditProc"] } {
set proc_name $globArray
append proc_name "($var,editProc)"
$proc_name $var $var
}
}
}
#####################################
### Panel widget check procedures ###
#####################################
# ====================================#
# Generic widget status check procs #
#=====================================#
# A generic proc to respond to option-menu selection
# NOTE: Define "check_proc_call" method if you want to do some special
# processing for your option menu
#
proc PanelCheck::checkOptionMenu { om wdg globArray fld check_proc_call event_info } {
global Info
upvar #0 $globArray theArray
# If mouse is just moved, but not yet released!
if { $event_info >= 256 } {
return 0
}
# Let option menu widget to update
Util::doWait 50
# Compare current value to "panel in" value for
# modification marking
if { [info exists theArray($fld,old)] } {
if { $theArray($fld) != $theArray($fld,old) } {
set theArray($fld,mod) 1
Panel::panelDataModified 1 $globArray
} else {
set theArray($fld,mod) 0
if { ![Panel::panelHasModifiedStatus $globArray] } {
Panel::panelDataModified 0 $globArray
}
}
Widget::setOptionMenuStatus $globArray $fld $wdg
}
eval "$check_proc_call"
return 1
}
# A generic proc to respond to a selection-box selection
# NOTE: Define "check_proc_call" method if you want to do some special
# processing for your selection box
# event_mode: mouse action like Control-Button1
# local_x local_y: local widget coordinates for selection
#
proc PanelCheck::checkSelectionBox { wdg globArray fld check_proc_call event_mode {lb_x ""} {lb_y ""} } {
global Info
upvar #0 $globArray theArray
set arguments {[list $event_mode $lb_x $lb_y]}
eval "$check_proc_call $arguments"
}
# A generic proc to respond to checkbox selection
#
proc PanelCheck::checkCheckBoxFieldStatus { globArray fld } {
global Info
upvar #0 $globArray theArray
# Compare current value to "panel in" value for
# modification marking
if { [info exists theArray($fld,old)] } {
set cur_val $theArray($fld)
set old_val $theArray($fld,old)
if {$cur_val == "" } {
set cur_val "False"
}
if {$old_val == "" } {
set old_val "False"
}
if { $cur_val != $old_val } {
set theArray($fld,mod) 1
Panel::panelDataModified 1 $globArray
} else {
set theArray($fld,mod) 0
if { ![Panel::panelHasModifiedStatus $globArray] } {
Panel::panelDataModified 0 $globArray
}
}
Widget::setCheckBoxStatus $globArray $fld $theArray(allWidgets,$fld)
}
}
# A generic proc to respond to checkbutton (yes/no button) selection
#
proc PanelCheck::checkCheckButtonFieldStatus { globArray fld } {
global Info
upvar #0 $globArray theArray
set cur_value $theArray($fld)
# Compare current value to "panel in" value for
# modification marking
if { [info exists theArray($fld,old)] } {
if { $cur_value != $theArray($fld,old) } {
set theArray($fld,mod) 1
Panel::panelDataModified 1 $globArray
} else {
set theArray($fld,mod) 0
if { ![Panel::panelHasModifiedStatus $globArray] } {
Panel::panelDataModified 0 $globArray
}
}
}
}
# A generic proc to respond to radibutton selection
#
proc PanelCheck::checkRadioButtonFieldStatus { globArray fld } {
global Info
upvar #0 $globArray theArray
set cur_value $theArray($fld)
# Compare current value to "panel in" value for
# modification marking
if { [info exists theArray($fld,old)] } {
if { $cur_value != $theArray($fld,old) } {
set theArray($fld,mod) 1
Panel::panelDataModified 1 $globArray
} else {
set theArray($fld,mod) 0
if { ![Panel::panelHasModifiedStatus $globArray] } {
Panel::panelDataModified 0 $globArray
}
}
}
}
# A generic proc to respond to Abs checkbox selection
#
proc PanelCheck::checkAbsFieldStatus { globArray fld } {
global Info
upvar #0 $globArray theArray
}
# A generic proc to respond to Use checkbox selection
#
proc PanelCheck::checkUseFieldStatus { globArray fld } {
global Info
upvar #0 $globArray theArray
set cur_value $theArray($fld,Use)
# Compare current value to "panel in" value for
# modification marking
if { [info exists theArray($fld,Use,old)] } {
if { $cur_value != $theArray($fld,Use,old) } {
set theArray($fld,Use,mod) 1
} else {
set theArray($fld,Use,mod) 0
if { ![Panel::panelHasModifiedStatus $globArray] } {
Panel::panelDataModified 0 $globArray
}
}
}
Widget::setFieldStatus $globArray $fld,Use "CheckBox"
}
# A generic proc to respond to File checkbox selection
#
proc PanelCheck::checkFileFieldStatus { globArray fld } {
global Info
upvar #0 $globArray theArray
set cur_value $theArray($fld,file)
# Compare current value to "panel in" value for
# modification marking
if { [info exists theArray($fld,file,old)] } {
if { $cur_value != $theArray($fld,file,old) } {
set theArray($fld,file,mod) 1
} else {
set theArray($fld,file,mod) 0
if { ![Panel::panelHasModifiedStatus $globArray] } {
Panel::panelDataModified 0 $globArray
}
}
}
Widget::setFieldStatus $globArray $fld,file "CheckBox"
}
#===============================#
# Generic widget type fill procs
#===============================#
proc Common(CheckBox,fillProc) {arg} {
set globArray [lindex $arg 0]
set fld [lindex $arg 1]
upvar #0 $globArray theArray
if { [info exists theArray(targetMask)] } {
DataField::checkActivitySlaves $globArray $fld $theArray(targetMask)
} else {
DataField::checkActivitySlaves $globArray $fld ""
}
}
proc Common(BrowsableFile,fillProc) {arg} {
set globArray [lindex $arg 0]
set fld [lindex $arg 1]
upvar #0 $globArray theArray
if {1 == [DataField::getFieldProperty $globArray $fld HasUseCheckBox "" 0]} {
if { $theArray($fld,act) &&
$theArray($fld) != ""
} {
set theArray($fld,Use) 1
} else {
set theArray($fld,Use) 0
}
}
#-Set BrwosableFile-widget state
Common(BrowsableFile,editProc) $arg
}
proc Common(IncludeFile,fillProc) {arg} {
set globArray [lindex $arg 0]
set fld [lindex $arg 1]
upvar #0 $globArray theArray
if { $theArray(INCLUDE,act) &&
$theArray(INCLUDE) != ""
} {
set theArray(INCLUDE,Use) 1
} else {
set theArray(INCLUDE,Use) 0
}
#-Set INCLUDE-widget state
Common(IncludeFile,editProc) $arg
}
proc Common(OptionMenu,fillProc) {arg} {
set globArray [lindex $arg 0]
set fld [lindex $arg 1]
upvar #0 $globArray theArray
if { [info exists theArray(targetMask)] } {
DataField::checkActivitySlaves $globArray $fld $theArray(targetMask)
} else {
DataField::checkActivitySlaves $globArray $fld ""
}
}
#===============================#
# Generic widget type edit procs
#===============================#
#
# General proc activated from widget
#
proc Common(BrowsableFile,editProc) {arg} {
global Info
set globArray [lindex $arg 0]
set fld [lindex $arg 1]
upvar #0 $globArray theArray
# Clean trailing quotes and white space
set theArray($fld) [string trim $theArray($fld) " \"\t\n"]
# If we have a use-checkbox which controls entry fields state
#
if {1 == [DataField::getFieldProperty $globArray $fld HasUseCheckBox "" 0]} {
if { !$theArray($fld,Use) } {
set theArray($fld,act) 0
} else {
set theArray($fld,act) 1
}
Widget::configureField $globArray $fld
}
return
}
proc Common(IncludeFile,editProc) {arg} {
global Info
set globArray [lindex $arg 0]
set fld [lindex $arg 1]
set key [lindex $arg 2]
upvar #0 $globArray theArray
# Clean trailing quotes and white space
set theArray($fld) [string trim $theArray($fld) " \"\t\n"]
# If we have a use-checkbox which controls entry fields state
#
if { [info exists theArray($fld,Use)] } {
if { !$theArray($fld,Use) } {
set theArray($fld,act) 0
} else {
set theArray($fld,act) 1
}
Widget::configureField $globArray $fld
}
if { $key == "Double-1" } {
set fn $theArray($fld)
if { $fn != "" && [file isfile $fn] } {
FileBrowser::browse .winEdit$globArray$fld $fn 1 1
}
}
return
}
proc Common(OptionMenu,editProc) {arg} {
set globArray [lindex $arg 0]
set fld [lindex $arg 1]
upvar #0 $globArray theArray
if { [info exists theArray(targetMask)] } {
DataField::checkActivitySlaves $globArray $fld $theArray(targetMask)
} else {
DataField::checkActivitySlaves $globArray $fld ""
}
}
# ========================================================== #
# Check procs attached to the panel widgets at creation time #
# ========================================================== #
proc PanelCheck::execFillProc {globArray fld } {
# NOTE: Call first generic fill proc for the field type
#
set wtype [DataField::getFieldProperty $globArray $fld WidgetType]
Util::execArrayProc Common "$wtype,fillProc" [list $globArray $fld]
# Then call possible array-field specific fill proc
#
if { 1 == [DataField::getFieldProperty $globArray $fld IsUserDefinedField "" 0] } {
Util::execArrayProc $globArray "UserDefinedField,fillProc" $fld
} else {
Util::execArrayProc $globArray "$fld,fillProc"
}
}
proc PanelCheck::execEditProc {globArray fld {arg ""}} {
# NOTE: Call first generic edit proc for the field type
#
set wtype [DataField::getFieldProperty $globArray $fld WidgetType]
Util::execArrayProc Common "$wtype,editProc" [list $globArray $fld $arg]
# Then call possible array-field specific edit proc
#
if { 1 == [DataField::getFieldProperty $globArray $fld IsUserDefinedField "" 0] } {
Util::execArrayProc $globArray "UserDefinedField,editProc" $fld
} else {
Util::execArrayProc $globArray "$fld,editProc" $arg
}
}
# =====================
# Widget specific calls
# =====================
proc PanelCheck::singleButton {globArray fld } {
PanelCheck::execEditProc $globArray $fld
}
proc PanelCheck::groupButton {globArray group fld } {
PanelCheck::execEditProc $globArray $fld
}
proc PanelCheck::singleCheckButton {globArray fld } {
PanelCheck::checkCheckButtonFieldStatus $globArray $fld
PanelCheck::execEditProc $globArray $fld
}
proc PanelCheck::groupCheckButton {globArray group fld } {
PanelCheck::checkCheckButtonFieldStatus $globArray $fld
PanelCheck::execEditProc $globArray $fld
}
proc PanelCheck::singleCheckBox {globArray fld} {
upvar #0 $globArray theArray
if { [info exists theArray(targetMask)] } {
DataField::checkActivitySlaves $globArray $fld $theArray(targetMask)
} else {
DataField::checkActivitySlaves $globArray $fld ""
}
PanelCheck::checkCheckBoxFieldStatus $globArray $fld
PanelCheck::execEditProc $globArray $fld
}
proc PanelCheck::singleListBox {globArray fld arg} {
PanelCheck::execEditProc $globArray $fld $arg
}
proc PanelCheck::singleOptionMenu {globArray fld } {
PanelCheck::execEditProc $globArray $fld
}
proc PanelCheck::singleSelectionBox {globArray fld arg} {
PanelCheck::execEditProc $globArray $fld $arg
}
proc PanelCheck::singleText {globArray fld } {
PanelCheck::execEditProc $globArray $fld
}
proc PanelCheck::groupCheckBox {globArray group fld} {
PanelCheck::checkCheckBoxFieldStatus $globArray $fld
PanelCheck::execEditProc $globArray $fld
}
proc PanelCheck::singleRadioButton {globArray fld } {
PanelCheck::checkRadioButtonFieldStatus $globArray $fld
PanelCheck::execEditProc $globArray $fld
}
proc PanelCheck::groupRadioButton {globArray group fld} {
PanelCheck::checkRadioButtonFieldStatus $globArray $group
if { ![Util::execArrayProc $globArray "$group,groupEditProc" $fld] } {
PanelCheck::singleRadioButton $globArray $fld
}
}
proc PanelCheck::singleFileButton {globArray fld} {
PanelCheck::checkFileFieldStatus $globArray $fld
PanelCheck::execEditProc $globArray $fld
}
proc PanelCheck::singleProcedureButton {globArray fld} {
PanelCheck::execEditProc $globArray $fld
}
proc PanelCheck::singleBrowsableDirectory {globArray fld} {
PanelCheck::execEditProc $globArray $fld
}
proc PanelCheck::singleBrowsableFile {globArray fld} {
PanelCheck::execEditProc $globArray $fld
}
proc PanelCheck::singleAbsButton {globArray fld} {
PanelCheck::checkAbsFieldStatus $globArray $fld
PanelCheck::execEditProc $globArray $fld
}
proc PanelCheck::singleIncludeFile {globArray fld arg} {
PanelCheck::execEditProc $globArray $fld $arg
}
proc PanelCheck::singleUseButton {globArray fld} {
PanelCheck::checkUseFieldStatus $globArray $fld
PanelCheck::execEditProc $globArray $fld
}
proc PanelCheck::groupProcedureButton {globArray fld} {
global Common
upvar #0 $globArray theArray
PanelCheck::checkCheckBoxFieldStatus $globArray $fld
set panel $theArray(parameterType)
foreach FV [lrange $Common($panel,$fld,group) 1 end] {
set m $entry_widget
append m $FV
if {1 == $theArray($fld,file)} {
Widget::configureS $m disabled
} else {
Widget::configureS $m normal
}
}
}
# end ecif_tk_panelCheck.tcl
# ********************
|