freevo 1.9.2b2-4.2 / etc / freevo / local_conf.py.example

# -*- coding: iso-8859-1 -*-
# -----------------------------------------------------------------------
# local_conf.py - System configuration
# -----------------------------------------------------------------------
# $Id: local_conf.py.example 11728 2010-11-12 17:54:09Z adam $
#
# Notes:
#
# This file contains your freevo settings, overriding the settings in
# freevo_config.py. freevo_config.py, which is usually installed in
# /usr/share/freevo, contains all the core settings.  To change the settings copy
# this file to ~/.freevo/local_conf.py or /etc/freevo/local_conf.py
#
# Debian specific note:
# the file /etc/freevo/debconf.py is loaded after freevo_config.py
# and before local_conf.py . It imports the variables 
# VIDEO_ITEMS AUDIO_ITEMS IMAGE_ITEMS TV_RECORD_DIR
# as are set using the debconf.
# Those variables may then be augmented here, by using the += operator.
#
# It does not contain all the possible settings that you can change, see
# freevo_config.py for all the possible settings. Also it does not contain
# settings for the plug-ins, plug-ins contain their configuration information and
# the can be listed with:
# | freevo plugins -l
# and the settings can se shown with
# | freevo plugins -i <name of plug-in>
#
# E.g.: when you want a alsa as mplayer audio out, just put in local_conf.py:
# | MPLAYER_AO_DEV = 'alsa9'
#
# The vertical line indicates code.
#
# This is no normal config file, it's Python code. Because of that, you
# need to follow some rules to avoid crashes. The examples should explain
# the settings, but make sure a line starting with a variable has NO SPACES OR
# TABS at the beginning.
#
# -----------------------------------------------------------------------
# Freevo - A Home Theater PC framework
# Copyright (C) 2002 Krister Lagerstrom, et al.
# Please see the file freevo/Docs/CREDITS for a complete list of authors.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of MER-
# CHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
# Public License for more details.
#
# You should have received a copy of the GNU General Public License along
# with this program; if not, write to the Free Software Foundation, Inc.,
# 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
#
# -----------------------------------------------------------------------

CONFIG_VERSION = 5.29

# ======================================================================
# General freevo settings:
# ======================================================================

# LOCALE='iso-8859-15'

# AUDIO_DEVICE       = '/dev/dsp'      # e.g.: /dev/dsp0, /dev/audio, /dev/alsa/?
# AUDIO_INPUT_DEVICE = '/dev/dsp1'     # e.g.: /dev/dsp0, /dev/audio, /dev/alsa/?
# MIXER_MAJOR_CTRL   = 'VOL'           # Freevo takes control over one audio ctrl
                                       # 'VOL', 'PCM' 'OGAIN' etc.

# MIXER_MAJOR_MUTE_CTRL = 'PCM'        # used in alsamixer.py There are systems where
                                       # volume and mute use different controls

# MIXER_DEVICE          = '/dev/mixer' # mixer device
# MIXER_CONTROL_ALL     = 1            # Should Freevo take complete control of audio
# MIXER_VOLUME_MAX      = 90           # Set what you want maximum volume level to be.
# MIXER_VOLUME_DEFAULT  = 40           # Set default volume level.
# MIXER_VOLUME_TV_IN    = 60           # Set this to your preferred level 0-100.
# MIXER_VOLUME_VCR_IN   = 90           # If you use different input from TV
# MIXER_VOLUME_RADIO_IN = 80           # Set this to your preferred level 0-100.

# START_FULLSCREEN_X = 0               # Start in fullscreen mode if using x11 or xv.

# SYS_SHUTDOWN_CONFIRM   = 1               # ask before shutdown

#
# Physical ROM drives, multiple ones can be specified
# by adding comma-seperated and quoted entries.
#
# Format [ ('mountdir1', 'devicename1', 'displayed name1'),
#          ('mountdir2', 'devicename2', 'displayed name2'), ...]
#
# Set to None to autodetect drives in during startup from /etc/fstab,
# set to [] to disable rom drive support at all
#
# ROM_DRIVES = None

# ROM_DRIVES_AUTOFS = False  # Indicates that an automounter daemon is being used.
#                              Does not try to mount/umount the media.

#
# Hide discs from the wrong menu (e.g. VCDs in audio menu) and empty discs.
#
# HIDE_UNUSABLE_DISCS = 1

#
# Attempt to set the speed of the ROM drive. A good value for keeping the
# drive silent while playing movies is 8.
#
# ROM_SPEED = 0

#
# Perform a whole system shutdown at SHUTDOWN! Useful for standalone boxes.
#
# SYS_SHUTDOWN_ENABLE = 0
#
# Command to execute to shutdown the system
#
# SYS_SHUTDOWN_CMD = "sudo shutdown -h now"
# SYS_RESTART_CMD = "sudo shutdown -r now"

#
# New Style shutdown dialog
#
# True for the new style dialog
# False for the original style dialog

# SHUTDOWN_NEW_STYLE_DIALOG=True

# ======================================================================
# AUTOSHUTDOWN CONFIGURATION
# ======================================================================

# For assistance, read the help with 'freevo plugins -i autoshutdown'

# replace the default shutdown plugin
# plugin.remove('shutdown')
# plugin.activate('autoshutdown', level=90)

# activate the timer
# plugin.activate('autoshutdown.autoshutdowntimer')

# -- autoshutdown menu item configuration --
# AUTOSHUTDOWN_CONFIRM = True

# -- autoshutdown timer configuration --
# AUTOSHUTDOWN_TIMER_TIMEOUT=30

# -- autoshutdown core configuration --
# AUTOSHUTDOWN_PRETEND = False
# AUTOSHUTDOWN_DEFAULT_WAKEUP_TIME = "13:00"
# AUTOSHUTDOWN_FORCE_DEFAULT_WAKEUP = True
# AUTOSHUTDOWN_WAKEUP_TIME_PAD = 180
# AUTOSHUTDOWN_ALLOWED_IDLE_TIME = 45
# AUTOSHUTDOWN_WHILE_USER_LOGGED = True
# AUTOSHUTDOWN_PROCESS_LIST = [
#    'mencoder','transcode','cdrecord',
#    'emerge','tvgids.sh','tv_grab','sshd:'
# ]

# -- autoshutdown process check configuration --
# AUTOSHUTDOWN_PROCESS_CHECK = '/home/user/bin/freevoshutdown_check'

# -- choice of wakeup method --
# AUTOSHUTDOWN_METHOD = None
# AUTOSHUTDOWN_METHOD = 'nvram'
# AUTOSHUTDOWN_METHOD = 'acpi'

# -- autoshutdown acpi-alarm configuration
# AUTOSHUTDOWN_ACPI_CMD = "sudo /PATH/TO/set_acpi.sh"

# -- autoshutdown nvram-wakeup configuration --
# AUTOSHUTDOWN_NVRAM_CMD = "/usr/bin/nvram-wakeup --syslog"
# AUTOSHUTDOWN_BIOS_NEEDS_REBOOT = True

# -- if the bios needs a reboot --
# AUTOSHUTDOWN_BOOT_LOADER = None
# AUTOSHUTDOWN_BOOT_LOADER = "LILO"
# AUTOSHUTDOWN_BOOT_LOADER = "GRUB"

# -- autoshutdown reboot lilo configuration --
# AUTOSHUTDOWN_LILO_CMD = "/sbin/lilo -R PowerOff"

# -- autoshutdown reboot grub configuration --
# AUTOSHUTDOWN_GRUB_CMD = "/sbin/grub-set-default 0"
# AUTOSHUTDOWN_REMOUNT_BOOT_CMD = "/bin/mount /boot -o remount,rw"


# ======================================================================
# Events
# ======================================================================
#
# You can add more keybindings by adding them to the correct hash.
# e.g. If you want to send 'contrast -100' to mplayer by pressing the '1' key,
# just add the following line:
#
# EVENTS['video']['1'] = Event(VIDEO_SEND_MPLAYER_CMD, arg='contrast -100')
#
# See src/event.py for a list of all possible events.

#
# Some events to jump to menus
#
# EVENTS['menu']['GUIDE'] = Event(MENU_GOTO_TVGUIDE) # Not working
# EVENTS['menu']['VIDEOS'] = Event(MENU_GOTO_VIDEOS)
# EVENTS['menu']['MUSIC'] = Event(MENU_GOTO_MUSIC)
# EVENTS['menu']['PICTURES'] = Event(MENU_GOTO_IMAGES)
# EVENTS['menu']['GAMES'] = Event(MENU_GOTO_GAMES)
# EVENTS['menu']['RADIO'] = Event(MENU_GOTO_RADIO) # Not working
# EVENTS['menu']['POWER'] = Event(MENU_GOTO_SHUTDOWN)

#
# Use arrow keys for back and select (alternate way of navigating)
#
# MENU_ARROW_NAVIGATION = False

#
# Process keyboard events from SDL. You want this unless you use only lirc
# or event devices below.
#
# SYS_USE_KEYBOARD = True

#
# Process mouse events from SDL/Pygame. You want this to control Freevo
# with a mouse
#
# SYS_USE_MOUSE = False

#
# Keymap to map keyboard keys to event strings. You can also add new keys
# here, e.g. KEYMAP[key.K_x] = 'SUBTITLE'. The K_-names are defined by pygame.
# Keys can be combined with modifiers like KEYMAP[key.K_x | M_ALT | M_CTRL]
# When pygame doesn't recognize the key pressed it passes just scancode.
# This use to happen to "multimedia" keys. In this case special modifier
# can be used: KEYMAP[scancode | M_SCAN]. 
#

#
# List of /dev/input/event# devices to monitor. You can specify either the
# device node (e.g. '/dev/input/event1') or the name of the device (e.g.
# 'ATI Remote Wonder II'). If you monitor your keyboard both here and with
# SYS_USE_KEYBOARD, then you will get duplicate events.
#
EVENT_DEVS = []

# Keymap to map input events to event strings. You can change current mappings
# and add new ones here, e.g. EVENTMAP['KEY_COFFEE'] = 'SUBTITLE'. Key names
# are defined by the Linux input layer (input.h). An axis is described by a
# pair, one for positive and one for negative movement, e.g.
#
# EVENTMAP['REL_Z'] = ('LEFT', 'RIGHT')

# Use Internet resources to fetch information?
# For example, Freevo can use CDDB for album information,
# the IMDB movie database for movie info, and Amazon for cover searches.
# Set this to 0 if your computer isn't connected to a network.
#
# SYS_USE_NETWORK = True

# Follow symlinks in media directories
#
# SYS_FOLLOW_SYMLINKS = False

#
# Directory to store temporary files
#
# FREEVO_TEMPDIR = '/tmp'

#
# Directory location to save files when the normal filesystem
# doesn't allow saving. This directory can save covers and fxd files
# for read only filesystems like ROM drives. Set this variable to your
# old MOVIE_DATA_DIR if you have one. It needs to be set to a directory
# Freevo can write to.
#
# OVERLAY_DIR = os.path.join(FREEVO_CACHEDIR, 'vfs')

#
# Umask setting for all files.
# 022 means only the user has write access. If you share your Freevo
# installation with different users, set this to 002
#
# UMASK = 022

#
# Suffix for playlist files
#
# PLAYLIST_SUFFIX = [ 'm3u' ]

#
# Use md5 in mmpython to create unique disc ids. Enable this if you have
# problems with different discs having the same id.
#
# MMPYTHON_CREATE_MD5_ID = 0

#
# Keep metadata in memory
# Setting this variable will keep all cache files in memory. Startup will be
# slower, but for large directories, this will speed up the display.
# 0 = Only keep current dir in memory. Use this if you have too much data
#     and not enough RAM
# 1 = Once loaded, keep cachefile for directory in memory
# 2 = Load all cachefiles on startup
#
# WARNING: you should not run 'freevo cache' when freevo is running.
#
# MEDIAINFO_USE_MEMORY = 1

#
# Cache images. This uses a lot of disc space but it's a huge speed
# enhancement. The images will be cached in OVERLAY_DIR
#
CACHE_IMAGES = 1


# ======================================================================
# Plugins:
# ======================================================================

# Remove undesired plugins by setting plugin.remove(code).
# You can also use the name to remove a plugin. But if you do that,
# all instances of this plugin will be removed.
#
# Examples:
# plugin.remove(plugin_tv) or
# plugin.remove('tv') will remove the tv module from the main menu
# plugin.remove(rom_plugins['image']) will remove the rom drives from the
#   image main menu,
# plugin.remove('rom_drives.rom_items') will remove the rom drives from all
#   menus
#
# See freevo_config.py for a list of loaded plugins

#
# Use ivtv_record instead if you have an ivtv based card (PVR-250/350)
# and want freevo to do everthing for you. TV_SETTINGS must be set
# correctly. To use you need to set the following two lines:
#
# plugin.remove('tv.generic_record')
# plugin_record = plugin.activate('tv.ivtv_record')

#
# Enable this for joystick support:
# plugin.activate('joy')


# ----------------------------------------------------------------------
# Headlines
#
# You are free to use any rss feeds in the HEADLINES_LOCATIONS below
# These are just working examples for the Freevo feeds.
# To turn off Headlines add plugin.remove('headlines')
# ----------------------------------------------------------------------
# plugin.activate('headlines', level=45)
# HEADLINES_LOCATIONS = [
#    ('Freevo news releases', 'http://sourceforge.net/export/rss2_projnews.php?group_id=46652'),
#    ('Freevo file releases', 'http://sourceforge.net/export/rss2_projfiles.php?group_id=46652'),
#    ('Freevo summary+stats', 'http://sourceforge.net/export/rss2_projsummary.php?group_id=46652'),
#    ('Freevo donors', 'http://sourceforge.net/export/rss2_projdonors.php?group_id=46652'),
# ]

# ----------------------------------------------------------------------
# Speak using Festival
# ----------------------------------------------------------------------
# Speak plugin to output menu items via festival
# plugin.activate('speak')
# SPEAK_WELCOME = ''
# SPEAK_SHUTDOWN = ''

# ----------------------------------------------------------------------
# CD Ripping
# ----------------------------------------------------------------------
# CD_RIP_TMP_DIR = '/tmp/'
# CD_RIP_TMP_NAME = 'track_%(track)s_being_ripped'
# CD_RIP_PN_PREF = '%(artist)s/%(album)s/%(track)s - %(song)s'
# CD_RIP_CDPAR_OPTS = '-s'
# CD_RIP_LAME_OPTS = '--vbr-new -b 192 -h'
# CD_RIP_OGG_OPTS = '-m 128'
# CD_RIP_FLAC_OPTS = '-8'
# CD_RIP_CASE = None          # Can be title, upper, lower
# CD_RIP_REPLACE_SPACE = None # Can be '_', '-', etc.

# ----------------------------------------------------------------------
# CD Burning
# ----------------------------------------------------------------------
# CDBURN_AUDIO_DAO = 1
# CDBURN_MKISOFS_PATH = '/usr/bin/mkisofs'
# CDBURN_CDRECORD_PATH = '/usr/bin/cdrecord'
# CDBURN_TEMP_DIR='/tmp/'
# CDBURN_DEV = '/dev/cdrom'
# CDBURN_SPEED = 32

# ----------------------------------------------------------------------
# Re-encode
# This plug-in transcodes a video to a different format
# ----------------------------------------------------------------------
# plugin.activate('video.reencode')
# REENCODE_CONTAINER = 'avi'
# REENCODE_RESOLUTION = 'Optimal'
# REENCODE_VIDEOCODEC = 'XviD'
# REENCODE_VIDEOBITRATE = 1000
# REENCODE_AUDIOCODEC = 'MPEG 1 Layer 3 (mp3)'
# REENCODE_AUDIOBITRATE = 128
# REENCODE_NUMPASSES = 1
# REENCODE_VIDEOFILTER = None

# ----------------------------------------------------------------------
# Freevo Music Player Daemon
# http://www.musicpd.org/
# ----------------------------------------------------------------------
# plugin.activate('mpd')

# ----------------------------------------------------------------------
# Freevo Bluetooth Phone Settings
# ----------------------------------------------------------------------
# This plugin uses The Python bindings for Bluez bluetooth stack.
#
# It can be downloaded from http://org.csail.mit.edu/pybluez/download.html
# or installed with the package manager of your operating system.
#
# To this plugin to work you need the j2me midlet installed in a compatible
# phone.
#
# plugin.activate('freevused')

# if RFCOMM port is already binded wait this seconds to retry binding
# FVUSED_BIND_TIMEOUT = 30

# Translation of commands from j2me client to events of Freevo
# FVUSED_CMDS = {
#       'PREV': 'UP',                # 1st row left
#       'STRT': 'SELECT',            # 1nd row center
#       'NEXT': 'DOWN',              # 1st row right
#       'RWND': 'LEFT',              # 2nd row left
#       'PAUS': 'PAUSE',             # 2nd row center
#       'FFWD': 'RIGHT',             # 2nd row right
#       'VOL-': 'MIXER_VOLDOWN',     # 3rd row left
#       'STOP': 'EXIT',              # 3rd row center
#       'VOL+': 'MIXER_VOLUP',       # 3rd row right
#       'VOLM': 'MIXER_VOLMUTE',     # 4th row left
#       'SLCT': 'ENTER',             # 4th row center
#       'MAIN': 'MENU'               # 4th row right
# }

# ----------------------------------------------------------------------
# Freevo Button Bar Plug-in
# ----------------------------------------------------------------------
# plugin.activate('buttonbar')

# You'll also need to map the 'RED', 'GREEN', 'YELLOW'
# and 'BLUE' events to keys for example (don't use this
# it overrides some default keys)
# KEYMAP[key.K_F5] = 'RED'
# KEYMAP[key.K_F6] = 'GREEN' #Already mapped to record
# KEYMAP[key.K_F7] = 'YELLOW'
# KEYMAP[key.K_F8] = 'BLUE'

# ----------------------------------------------------------------------
# Freevo Screensaver Plug-in
# ----------------------------------------------------------------------
# SCREENSAVER_DELAY = 120 # of seconds to wait to start saver.
# SCREENSAVER_CYCLE_TIME = 60 # of seconds to run a screensaver before starting another saver.
# plugin.activate('screensaver')
# plugin.activate('screensaver.balls') # Bouncing balls all over the screen
# plugin.activate('screensaver.bouncing_freevo') # The freevo logo bouncing around the screen


# ======================================================================
# Freevo directory settings:
# ======================================================================

# You can change all this variables in the folder.fxd on a per folder
# basis
#
# Example:
# <freevo>
#   <folder title="Title of the directory" img-cover="nice-cover.png">
#     <setvar name="directory_autoplay_single_item" val="0"/>
#     <info>
#       <content>A small description of the directory</content>
#     </info>
#   </folder>
# </freevo>

#
# Should directories sorted by date instead of filename?
# 0 = No, always sort by filename.
# 1 = Yes, sort by date
# 2 = No, don't sory by date for normal directories,
#     but sort by date for TV_RECORD_DIR.
#
# DIRECTORY_SORT_BY_DATE = 2

#
# Should directory items be sorted in reverse order?
#
# DIRECTORY_REVERSE_SORT = 0

#
# Should we use "smart" sorting?
# Smart sorting ignores the word "The" in item names.
#
# DIRECTORY_SMART_SORT = 0

#
# Should files in directories have smart names?
# This removes the first part of the names when identical
#
# DIRECTORY_SMART_NAMES = 1

#
# Should Freevo autoplay an item if only one item is in the directory?
#
# DIRECTORY_AUTOPLAY_SINGLE_ITEM = 1

#
# Force the skin to use a specific layout number. -1 == no force. The layout
# toggle with DISPLAY will be disabled
#
# DIRECTORY_FORCE_SKIN_LAYOUT = -1

#
# Format string for the audio item names.
#
# Possible strings:
# a=artist, n=tracknumber, t=title, y=year, f=filename
#
# Example:
# This will show the title and the track number:
# DIRECTORY_AUDIO_FORMAT_STRING = '%(n)s - %(t)s'
#
# DIRECTORY_AUDIO_FORMAT_STRING = '%(t)s'

#
# Use media id tags to generate the name of the item. This should be
# enabled all the time. It should only be disabled for directories with
# broken tags.
#
# DIRECTORY_USE_MEDIAID_TAG_NAMES = 1

#
# The following settings determine which features are available for
# which media types.
#
# If you set this variable in a folder.fxd, the value is 1 (enabled)
# or 0 (disabled).
#
# Examples:
# To enable autoplay for audio and image files:
# DIRECTORY_AUTOPLAY_ITEMS = [ 'audio', 'image' ]
# To disable autoplay entirely:
# DIRECTORY_AUTOPLAY_ITEMS = []

# Make all items a playlist. So when one is finished, the next one will
# start. It's also possible to browse through the list with UP and DOWN
#
# DIRECTORY_CREATE_PLAYLIST     = [ 'audio', 'image' ]

# Add playlist files ('m3u') to the directory
#
# DIRECTORY_ADD_PLAYLIST_FILES  = [ 'audio', 'image' ]

# Add the item 'Random Playlist' to the directory
#
# DIRECTORY_ADD_RANDOM_PLAYLIST = [ 'audio' ]

# Make 'Play' not 'Browse' the default action when only items and not
# subdirectories are in the directory
#
# DIRECTORY_AUTOPLAY_ITEMS      = [ ]


# ======================================================================
# Freevo movie settings:
# ======================================================================

#
# Where the movie files can be found.
# This is a list of items (e.g. directories, fxd files). The items themselves
# can also be a list of (title, file)
#
# WARNING: see Debian specific note at beginning of this file
#
# VIDEO_ITEMS = [
#     ('action movies', '/freevo/movies/action'),
#     ('funny stuff', '/freevo/movies/comedy'),
# ]
#
# Some people access movies on a different machine using an automounter.
# To avoid timeouts, you can specify the machine name in the directory
# to check if the machine is alive first
# Directory myserver:/files/server-stuff will show the item for the
# directory /files/server-stuff if the computer myserver is alive.

#
# The list of filename suffixes that are used to match the files that
# are played wih MPlayer.
#
# VIDEO_MPLAYER_SUFFIX = [
#     'avi', 'mpg', 'mpeg', 'wmv', 'bin', 'rm', 'divx', 'ogm', 'vob', 'asf',
#     'm2v', 'm2p', 'mp4', 'viv', 'nuv', 'mov', 'iso', 'nsv', 'mkv', 'ogg',
#     'ts', 'flv',
# ]

#
# The list of filename suffixes that are used to match the files that
# are played wih Xine.
#
# VIDEO_XINE_SUFFIX = [
#     'avi', 'mpg', 'mpeg', 'rm', 'divx', 'ogm', 'asf', 'm2v', 'm2p', 'mp4',
#     'mov', 'cue', 'ts', 'iso', 'vob',
# ]

#
# Preferred video player
#
# VIDEO_PREFERED_PLAYER = 'mplayer'

#
# Only scan OVERLAY_DIR and VIDEO_SHOW_DATA_DIR for fxd files containing
# information about a disc. If you only have the fxd files for discs in
# one of this directories (and subdirectories), set this to 1, it will
# speed up startup, 0 may be needed if you have fxd files with disc links
# in your normal movie tree.
#
# VIDEO_ONLY_SCAN_DATADIR = 1

#
# try to detect a movie with more than one file and join them as one
# item
#
# VIDEO_AUTOJOIN = 1
#
# join files based on the regular expression
# seaches for 1, 01, 001, etc before a '.'; possibly too simple
#
# VIDEO_AUTOJOIN_REGEX='(0*1)\.'

#
# try to find out if deinterlacing is needed or not
#
# VIDEO_DEINTERLACE = None

#
# Instruct player to use XVMC for playback
#
# VIDEO_USE_XVMC = None

#
# Pass field dominance parameter to MPlayer
#
# VIDEO_FIELD_DOMINANCE = None

# PRE and POST playing commands.  Set these to a runnable command if
# you wish to do something before and after playing a video, like
# dimming the lights
# VIDEO_PRE_PLAY  = None
# VIDEO_POST_PLAY = None


# ======================================================================
# Freevo audio settings:
# ======================================================================

#
# Where the Audio (mp3, ogg) files can be found.
# This is a list of items (e.g. directories, fxd files). The items themselves
# can also be a list of (title, file)
#
# To add webradio support, add fxd/webradio.fxd to this list
#
# WARNING: see Debian specific note at beginning of this file
#
# AUDIO_ITEMS = [
#     ('Music Collection', '/freevo/audio/mp3'),
#     'fxd/webradio.fxd',
# ]

#
# The list of filename suffixes that are used to match the files that
# are played as audio.
#
# AUDIO_SUFFIX = [
#     'mp3', 'ogg', 'wav', 'm4a', 'wma', 'aac', 'flac', 'mka', 'ac3',
# ]

#
# Regular expression used to recognize filenames which are likely to be
# covers for an album
#
# This will match front.jpg and cover-f.jpg, but not back.jpg nor cover-b.jpg:
# AUDIO_COVER_REGEXP = 'front|-f'

#
# Format strings used to seach for audio cover images.
# Fist matching GIF, JPG or PNG image will be used as cover.
#
# Examples:
# AUDIO_COVER_FORMAT_STRINGS = [ 'cover-%(artist)s-%(album)s', 'mycover' ]
# AUDIO_COVER_FORMAT_STRINGS = [ '%(album)s', '../covers/%(album)s', '../covers/nocover' ]
#

#
# Preferred audio player
#
# AUDIO_PREFERED_PLAYER = 'mplayer'

#
# Show video files in the audio menu (for music-videos)
#
# AUDIO_SHOW_VIDEOFILES = False

# ======================================================================
# Freevo image viewer settings:
# ======================================================================

#
# Where image files can be found.
# This is a list of items (e.g. directories, fxd files). The items itself
# can also be a list of (title, file)
#
# WARNING: see Debian specific note at beginning of this file
#
# IMAGE_ITEMS = [
#     ('My Photos', '/freevo/images'),
# ]

#
# The list of filename suffixes that are used to match the files that
# are used for the image viewer.
#
# IMAGE_SUFFIX = [ 'jpg','gif','png','jpeg','bmp','tiff','psd' ]

#
# The viewer now supports a new type of menu entry, a slideshow file.
# It also has the slideshow alarm signal handler for automated shows.
# It uses a new configuration option:
#
# IMAGE_SSHOW_SUFFIX = [ 'ssr' ]

# The viewer can exclude certain types of images based on the regular expression list
# eg IMAGE_EXCLUDE = [('thm','tn_')]

# IMAGE_EXCLUDE = None

#
# Mode of the blending effect in the image viewer between two images
# Possible values are:
#
# None: no blending
# -1    random effect
#  0    alpha blending
#  1    wipe effect

# IMAGEVIEWER_BLEND_MODE = -1

#
# Duration to wait in the slideshow:
#
# IMAGEVIEWER_DURATION = 3

#
# If set to False, the slideshow must be started
# manualy with the play button:
#
# IMAGEVIEWER_AUTOPLAY = True

#
# When viewing images on a TV screen where the pixels are not square
# the images need to be scaled according to the aspect ratio of the TV
# Use this setting for 16x9 TVs
#   IMAGEVIEWER_ASPECT = (float(1024) / float(720))
# Use this setting for 4x3 TVs
#   IMAGEVIEWER_ASPECT = (float(768) / float(720))
# Use this setting for Monitors including HDTVs
#   IMAGEVIEWER_ASPECT = 1.0
#
# IMAGEVIEWER_ASPECT = 1.0



# ======================================================================
# Freevo games settings:
# ======================================================================

#
# MAME is an emulator for old arcade video games. It supports almost
# 2000 different games! The actual emulator is not included in Freevo,
# you'll need to download and install it separately. The main MAME
# website is at http://www.mame.net, but the version that is used here
# is at http://x.mame.net since the regular MAME is for Windows.
#
# SNES stands for Super Nintendo Entertainment System. Freevo relies
# on other programs that are not included in Freevo to play these games.
#
# NEW GAMES SYSTEM :
# =================
# The GAMES_ITEMS structure is now build as follows :
# <NAME>, <FOLDER>, (<TYPE>, <COMMAND_PATH>, <COMMAND_ARGS>, <IMAGE_PATH>, \
# [<FILE_SUFFIX_FOR_GENERIC>])
# where :
#              - <TYPE> : Internal game types (MAME or SNES) or
#                         generic one (GENERIC)
#              - <COMMAND_PATH> : Emulator command
#              - <COMMAND_ARGS> : Arguments for the emulator
#              - <IMAGE_PATH>   : Optionnal path to the picture
#              - <FILE_SUFFIX_FOR_GENERIC> : If the folder use the GENERIC
#                                            type, then you must specify here
#                                        the file suffix used by the emulator
# GAMES_ITEMS = [
#     ('MAME', '/home/media/games/xmame/roms',
#         ('MAME', '/usr/local/bin/xmame.SDL', '-fullscreen -modenumber 6',
#             '/home/media/games/xmame/shots', None)),
#     ('SUPER NINTENDO', '/home/media/games/snes/roms',
#         ('SNES', '/usr/local/bin/zsnes', '-m -r 3 -k 100 -cs -u', '', None )),
#     ('Visual Boy Advance', '/home/media/games/vba/roms/',
#         ('GENERIC', '/usr/local/vba/VisualBoyAdvance', ' ', '', [ 'gba' ] )),
#     ('MEGADRIVE', '/home/media/games/megadrive/roms',
#         ('GENESIS', '/usr/local/bin/generator-svgalib', '', '', '' ))
# ]
#
# GAMES_ITEMS = None

#
# These settings are used for the MAME arcade emulator:
#

# Priority of the game process
# 0 = Don't change the priority
# >0 - Lower priority
# <0 - Higher priority
#
# GAMES_NICE = -20

#
# MAME cache directory
#
# GAMES_MAME_CACHE = '%s/romlist-%s.pickled' % (FREEVO_CACHEDIR, os.getuid())

# ======================================================================
# Freevo SKIN settings:
# ======================================================================

#
# XML file for the skin. If SKIN_XML_FILE is set, this skin will be
# used, otherwise the skin will rememeber the last choosen skin.
#
# SKIN_XML_FILE = 'blurr'
#
#
# Select a way when to switch to text view even if a image menu is there
#
# 1 = Force text view when all items have the same image and there are no
#     directories
# 2 = Ignore the directories, always switch to text view when all images
#     are the same
#
# SKIN_FORCE_TEXTVIEW_STYLE = 1

#
# Force text view for the media menu
# (The media menu is the first menu displayed for video, audio, images
# and games).
#
# SKIN_MEDIAMENU_FORCE_TEXTVIEW = 0


# ======================================================================
# Freevo OSD settings:
# ======================================================================

#
# System Path to search for fonts not included in the Freevo distribution
#
# OSD_EXTRA_FONT_PATH = [ '/usr/share/fonts/truetype' ]

#
# Font aliases
# All names must be lowercase! All alternate fonts must be in './share/fonts/'
#
# OSD_FONT_ALIASES = { 'arial_bold.ttf' : 'DejaVuSans-Bold.ttf' }

# For non-european character sets the OSD_FORCE_FONTNAME and
# OSD_FORCE_FONTSIZE can be set. The size is a scaling ratio, ie 1.2.
# Setting OSD_FORCE_FONTNAME='batang.ttf' and OSD_FORCE_FONTSIZE=1.0
# allows Korean characters.
# OSD_FORCE_FONTNAME = None
# OSD_FORCE_FONTSIZE = None
#
# Number of seconds to wait until the busy icon is shown in the menu.
# Busy icon can also be shown right away when there is more than a certain
# number of files in a directory.
#
# Set this to None to disable this.
# (seconds, files)
#
# OSD_BUSYICON_TIMER = (0.7, 200)

#
# Number of pixels to move the display to centre the OSD on the display
#
# OSD_OVERSCAN_LEFT = OSD_OVERSCAN_RIGHT = 0
# OSD_OVERSCAN_TOP = OSD_OVERSCAN_BOTTOM = 0

#
# Setting the cursors when freevo is run in fullscreen mode
#
# OSD_X11_CURSORS = '/usr/lib/X11/cursors/black.cursor /usr/lib/X11/cursors/blank.cursor'

#
# Execute a script on OSD startup.
#
# OSD_SDL_EXEC_AFTER_STARTUP = ""

#
# Execute a script on OSD close.
#
# OSD_SDL_EXEC_AFTER_CLOSE = ""

#
# Stop the osd before playing a movie with xine or mplayer. Some output
# devices need this. After playback, the osd will be restored
#
# OSD_STOP_WHEN_PLAYING = 0

#
# Dim text that doesn't fit instead of using ellipses.
# OSD_DIM_TEXT = 1

#
# OSD sound effects
#
# OSD_SOUNDS_ENABLED=False

# OSD_SOUNDS= {
#     'menu.navigate': None,
#     'menu.back_one': None,
#     'menu.select'  : None
# }

#
# Padding between icons
#
# OSD_IDLEBAR_PADDING = 20
# OSD_IDLEBAR_FONT = 'small0'
# OSD_IDLEBAR_CLOCK_FONT = 'clock'

# ======================================================================
# Freevo remote control settings:
# ======================================================================

#
# Location of the lircrc file
#
# For remote control support, Freevo needs a lircrc file, like this:
#
# begin
#       prog = freevo
#       button = select
#       config = SELECT
# end
#
# Check contrib/lirc for examples and helpers/freevo2lirc.pl for a converter
# script.
#
# LIRCRC = '/etc/freevo/lircrc'

#
# Joystick support
# 0 = Disable joystick support
# 1 = Use js0,
# 2 = Use js1,
#  ... etc
#
# JOY_DEV = 0
# JOY_SENS = 32000
# JOY_LOCKFILE = /path/to/joystick/lockfile

# Freevo can support as many buttons as your controller has
# as long as there is a corresponding entry in JOY_CMDS.
# You will also need to plugin.activate('joy').
# FYI: new kernels use /dev/input/jsX, but joy.py will fall back on /dev/jsX
#
# JOY_CMDS = {
#     'up'             : 'UP',
#     'down'           : 'DOWN',
#     'left'           : 'LEFT',
#     'right'          : 'RIGHT',
#     'button 1'       : 'PLAY',
#     'button 2'       : 'PAUSE',
#     'button 3'       : 'STOP',
#     'button 4'       : 'ENTER',
# }

# Here are the PS3 joy stick mappings
# JOY_CMDS = {
#     'button 5'       : 'UP',
#     'button 7'       : 'DOWN',
#     'button 8'       : 'LEFT',
#     'button 6'       : 'RIGHT',
#     'up'             : 'UP',
#     'down'           : 'DOWN',
#     'left'           : 'LEFT',
#     'right'          : 'RIGHT',
#     'button 14'      : 'SELECT',         # <circle>
#     'button 16'      : 'EXIT',           # <square>
#     'button 15'      : 'STOP',           # <x>
#     'button 1'       : 'ENTER',          # <select>
#
#     'button 11'      : 'VOL+',           # <L1>
#     'button 9'       : 'VOL-',           # <L2>
#     'button 2'       : 'MUTE',           # <L3>
#
#     'button 10'      : 'MUTE',           # <R2>
#     'button 4'       : 'PLAY',           # <start>
#     'button 13'      : 'PLAY',           # <start>
#     'button 17'      : 'MENU',           # <ps>
# }


# ======================================================================
# TVtime settings:
# ======================================================================

#
# Location of the TV time program
# Default: Use the value in freevo.conf
#
# TVTIME_CMD = CONF.tvtime


# ======================================================================
# MPlayer settings:
# ======================================================================

# MPLAYER_AO_DEV      = 'oss:/dev/dsp'  # e.g.: oss,sdl,alsa, see mplayer docs

# MPLAYER_VO_DEV specifies the -vo option to mplayer;
# see mplayer -vo help for the full list of output drivers;
# if the display in freevo.conf is X11 then this defaults to ''
# if it is set to the empty list, then mplayer autodetect will be used.
# MPLAYER_VO_DEV = 'dfbmga'             # X11 drivers in order of preference
# MPLAYER_VO_DEV_OPTS = ''              # e.g.: ':some_var=vcal'

# MPLAYER_AUDIO_CACHE_KB = 256
# MPLAYER_AUDIO_CACHE_MIN_PERCENT = 25
# MPLAYER_AUDIO_NETWORK_OPTS = '-cache %d -cache-min %d' % (MPLAYER_AUDIO_CACHE_KB, MPLAYER_AUDIO_CACHE_MIN_PERCENT)

# DVD_LANG_PREF       = 'en,se,no'      # Order of preferred languages on DVD.
# DVD_SUBTITLE_PREF   = ''              # Order of preferred subtitles on DVD.

# Priority of mplayer process. 0 is unchanged, <0 is higher prio, >0 lower prio.
# prio <0 has no effect unless run as root.
# MPLAYER_NICE        = -20

#
# Mplayer options to use the software scaler. If your CPU is fast enough, you
# might try a software scaler. You can disable it later for some larger files
# with the mplayer option '-nosws'. If you have -framedrop or -hardframedrop
# as mplayer option, the software scaler will also not be used.
# A good value for this variable is:
# MPLAYER_SOFTWARE_SCALER = "-subfont-text-scale 5 -fs -sws 2 -vf scale=%s:-3,"\
#                           "expand=%s:%s " % ( CONF.width, CONF.width, CONF.height )
# older versions of mplayer may need
# MPLAYER_SOFTWARE_SCALER = '-xy %s -sws 2 -vop scale:-1:-1:-1:100' % CONF.width
#
# MPLAYER_SOFTWARE_SCALER = ''

#
# Mplayer arguments for different media formats. (eg DVDs, CDs, AVI files, etc)
# Uses a default value if nothing else matches.
#
# MPLAYER_ARGS['dvd']     = '-cache 8192'
# MPLAYER_ARGS['vcd']     = '-cache 4096'
# MPLAYER_ARGS['cd']      = '-cache 1024 -cdda speed=2'
# MPLAYER_ARGS['tv']      = '-nocache'
# MPLAYER_ARGS['ivtv']    = '-cache 8192'
# MPLAYER_ARGS['avi']     = '-cache 5000 -idx'
# MPLAYER_ARGS['flv']     = '-nocache -forceidx'
# MPLAYER_ARGS['mp4']     = '-nocache -forceidx'
# MPLAYER_ARGS['rm']      = '-cache 5000 -forceidx'
# MPLAYER_ARGS['rmvb']    = '-cache 5000 -forceidx'
# MPLAYER_ARGS['webcam']  = 'tv:// -tv driver=v4l:width=352:height=288:outfmt=yuy2:device=/dev/video2'
# MPLAYER_ARGS['default'] = '-cache 5000'

#
# Number of seconds before seek value times out. This is used when
# seeking a specified number of minutes into a movie. If you make
# a mistake or change your mind, the seek value will timeout after
# this many seconds.
#
# MPLAYER_SEEK_TIMEOUT = 8

#
# Autocrop files when playing. This is useful for files in 4:3 with black
# bars on a 16:9 tv
#
# MPLAYER_AUTOCROP = 0

#
# Try to set correct 'delay' and 'mc' values for mplayer based on the delay
# from mmpython.
#
# This should correct av sync problems with mplayer for some files, but
# may also break things. (I don't know, that's why it's disabled by default).
# WARNING: When seeking, the playback is out of sync for some seconds!
#
# MPLAYER_SET_AUDIO_DELAY = 0

#
# Mplayer video filter for interlaced or progressive videos. If you have
# a slow pc, do not use post processing
# MPLAYER_VF_INTERLACED  = ''
# MPLAYER_VF_PROGRESSIVE = 'pp=fd'
# For pal and dvb-t recordings, the following looks good
# MPLAYER_VF_INTERLACED  = 'pp=md/de,phase=U'
#
# MPLAYER_VF_INTERLACED  = 'pp=de/fd'
# MPLAYER_VF_PROGRESSIVE = 'pp=de'
#
# For the autodetect TOP/BOTTOM field first in mplayer
# (if this feature present in mplayer)
# MPLAYER_HAS_FIELD_DOMINANCE = 1
#
# ======================================================================
# Xine settings:
# ======================================================================

# You need xine-ui version greater 0.9.21 to use the all the features
# of the xine plugin

# XINE_VO_DEV  = 'xv'
# XINE_COMMAND = '%s --auto-play=fq --hide-gui --borderless --geometry %sx%s+0+0 --no-splash' % \
#                (CONF.xine, CONF.width, CONF.height)
# XINE_ARGS_DEF = "--no-lirc --post='pp:quality=10;expand'"

# XINE_AO_DEV = 'oss'                     # alsa or oss

# Set to False if xine doesn't have '--no-lirc' option
# XINE_HAS_NO_LIRC = True

# Set to True is xine supports get_time this enables the position to be saved
# XINE_BOOKMARK = False


# ======================================================================
# Freevo TV settings:
# ======================================================================

#
# This is where recorded video is written.
#
# XXX the path doesn't work from the www cgi scripts!
#
# WARNING: see Debian specific note at beginning of this file
# 
# TV_RECORD_DIR = None

# This will enable duplicate recording detection
# TV_RECORD_DUPLICATE_DETECTION = True

# This will enable only new episodes to be recorded
# TV_RECORD_ONLY_NEW_DETECTION = True

# If true, this will automatically re-encode shows after they finish recording
# NOTE: You need to set up the REENCODE_* variables as for the reencode.py plugin -
# these default values will be used to re-encode the recordings
# TV_REENCODE = False

# If true, this will remove the original recording after automatic re-encoding is done
# TV_REENCODE_REMOVE_SOURCE = False


# ================================================================================
# Watching TV
# ================================================================================
#
# XXX You must change this to fit your local conditions!
#
# NORM: ntsc, pal, secam
# INPUT: television, composite1
# CHANLIST: One of the following:
#
# us-bcast, us-cable, us-cable-hrc, japan-bcast, japan-cable, europe-west,
# europe-east, italy, newzealand, australia, ireland, france, china-bcast,
# southafrica, argentina, canada-cable, russia
#
# TV_SETTINGS = 'NORM INPUT CHANLIST DEVICE'
# eg: TV_SETTINGS = 'ntsc television us-cable /dev/video0'

#
# Video input device
#
# Usually /dev/video0, but might be /dev/video1 instead for multiple boards.
#
# FreeBSD uses the Brooktree TV-card driver, not V4L.
#
# For Linux TV_DRIVER can be 'v4l' or 'v4l2' and depends on the driver
# TV_DRIVER = 'v4l2'
# TV_DEVICE = '/dev/video0'
# TV_INPUT = 0
#
# ================================================================================
# Listening to radio
# ================================================================================
#
# Radio device default is None, /dev/video24 for ivtv
# RADIO_DEVICE = '/dev/radio'

# Radio commands:
# plugin.activate('audio.radioplayer')
# plugin.activate('audio.radio')
#
# for fmtools
# RADIO_CMD = 'fm'
# RADIO_CMD_START = (RADIO_CMD + ' -d %s ' % RADIO_DEVICE + ' -q %s 65535')
# RADIO_CMD_STOP = (RADIO_CMD + ' -d %s ' % RADIO_DEVICE + ' -q off')
#
# for ivtv-radio
# RADIO_CMD = '/usr/bin/ivtv-radio -d /dev/radio0 -i /dev/video24'
# RADIO_STATIONS = [
#     ('DRS 1', '94.80'),
#     ('VIRUS', '104.30'),
#     (u'Radio Zürisee', '90.20'),
# ]

#
# Additional options to pass to mplayer in TV mode.
#
# eg. To turn off deinterlacing:
# TV_OPTS = '-vop pp=ci'
#
# TV_OPTS = ''

# TV_SETTINGS = '%s television %s %s' % (CONF.tv, CONF.chanlist, TV_DEVICE)

#
# Size (in MB) of the timeshift buffer. (ie: how long you can pause tv for.)
# This is set to a low default because the default buffer location is
# under FREEVO_CACHEDIR and we don't want to blow /var or /tmp.
# TIMESHIFT_BUFFER_SIZE = 128

# TIMESHIFT_ENCODE_CMD = 'mp1e -m3 -c%s -p%s -r14,100' % \
#                        (TV_SETTINGS.split()[3], AUDIO_INPUT_DEVICE)

# TIMESHIFT_BUFFER = '%s/timeshift.mpeg' % FREEVO_CACHEDIR

# TV_DATE_FORMAT = '%e-%b' # Day-Month: 11-Jun
# TV_TIME_FORMAT = '%H:%M' # Hour-Minute 14:05
# TV_DATETIME_FORMAT = '%A %b %d %I:%M %p' # Thursday September 24 8:54 am

# This is the filename format for files recorded using Freevo.
# You can use any of the strftime variables in it, provided you
# put two '%%' at the beginning.
#
# Some examples:
# %%A - Full weekday name.
# %%H - Hour (24-hour clock) as a decimal number [00,23].
# %%M - Minute as a decimal number [00,59].
# %%m - Month as a decimal number [01,12].
# %%d - Day of the month as a decimal number [01,31].
# %%p - Locale's equivalent of either AM or PM.
#
# More can be found at: http://www.python.org/doc/current/lib/module-time.html

# TV_RECORD_FILE_MASK = '%%m-%%d %%H:%%M %(progname)s - %(title)s'

# If using the persistent recordserver
# TV_RECORD_SCHEDULE = FREEVO_STATICDIR + '/schedule.pickle'
# TV_RECORD_FAVORITES = FREEVO_STATICDIR + '/favorites.pickle'
# TV_RECORD_FAVORITES_LIST = FREEVO_STATICDIR + '/favorites.txt'


# RECORDSERVER_IP = 'localhost'
# RECORDSERVER_PORT = 18001
# RECORDSERVER_SECRET = 'secret1'
# The timer offset when to check the next recording; in the USA use 0
# RECORDSERVER_ATTIMER = 45

# If the recordserver runs as root, set the uid to the given one
# after startup. The gui must also match one of the users group ids
# RECORDSERVER_UID = 0
# RECORDSERVER_UID = 0

# Remove old recordings if GB free is less than specified value
# RECORDSERVER_CLEANUP_THRESHOLD = 0

# start every recording X minutes before scheduled,
# and stop X minutes after scheduled - default to zero minutes.
# This must be a value in seconds although at the moment only has
# the percision of one minute.
# TV_RECORD_PADDING_PRE = 0
# TV_RECORD_PADDING_POST = 0

# Number of minutes before or after the start time of a favorite where
# a program matching the name, day of week etc should still be considered a
# favorite. For example a favorite has a start time of 21.00, but the program
# has been brought forward by the broadcaster by 10 minutes to 20.50, with
# a margin of less than 10 this program will not be recorded as the start time
# is outside the margin. But if the margin is set at 10 minutes or greater this
# program will be considered a favorite and recorded. Probably about 45 minutes
# is the best bet, better a false positive than a false negative.
# TV_RECORD_FAVORITE_MARGIN = 45

# PRE and POST recording commands.  Set these to a runnable command if
# you wish to have special mixer settings or video post processing.
# VCR_PRE_REC  = None
# VCR_POST_REC = None

# VCR_AUDIO = (':adevice=%s' % AUDIO_DEVICE +
#              ':audiorate=32000' +         # 44100 for better sound
#              ':forceaudio:forcechan=1:' + # Forced mono for bug in my driver
#              'buffersize=64')             # 64MB capture buffer, change?

# TV capture size for viewing and recording. Max 768x480 for NTSC,
# 768x576 for PAL. Set lower if you have a slow computer!
#
# For the 'tvtime' TV viewing application, only the horizontal size is used.
# Set the horizontal size to 400 or 480 if you have a slow (~500MHz) computer,
# it still looks OK, and the picture will not be as jerky.
# The vertical size is always either fullscreen or 480/576 (NTSC/PAL)
# for tvtime.
# TV_VIEW_SIZE = (640, 480)
# TV_REC_SIZE = (320, 240)   # Default for slower computers

# Input formats for viewing and recording. The format affect viewing
# and recording performance. It is specific to your hardware, so read
# the MPlayer docs and experiment with mplayer to see which one fits
# your computer best.
# TV_VIEW_OUTFMT = 'yuy2'   # Better quality, slower on pure FB/X11
# TV_REC_OUTFMT = 'yuy2'

# XXX Please see the mencoder docs for more info about the settings
# XXX below. Some stuff must be changed (adevice), others probably
# XXX should be ("Change"), or could be in some cases ("change?")
# VCR_CMD = (CONF.mencoder + ' ' +
#            'tv:// ' +                      # New mplayer requires this.
#            '-tv driver=%s:input=%d' % (TV_DRIVER, TV_INPUT) +
#            ':norm=%s' % CONF.tv +
#            ':channel=%(channel)s' +        # Filled in by Freevo
#            ':chanlist=%s' % CONF.chanlist +
#            ':width=%d:height=%d' % (TV_REC_SIZE[0], TV_REC_SIZE[1]) +
#            ':outfmt=%s' % TV_REC_OUTFMT +
#            ':device=%s' % TV_DEVICE +
#            VCR_AUDIO +                     # set above
#            ' -ovc lavc -lavcopts ' +       # Mencoder lavcodec video codec
#            'vcodec=mpeg4' +                # lavcodec mpeg-4
#            ':vbitrate=1200:' +             # Change lower/higher, bitrate
#            'keyint=30 ' +                  # Keyframe every 10 secs, change?
#            '-oac mp3lame -lameopts ' +     # Use Lame for MP3 encoding, must be enabled in mencoder!
#            'br=128:cbr:mode=3 ' +          # MP3 const. bitrate, 128 kbit/s
#            '-ffourcc divx ' +              # Force 'divx' ident, better compat.
#            '-endpos %(seconds)s ' +        # only mencoder uses this so do it here.
#            '-o %(filename)s')              # Filled in by Freevo

# TV_VIDEO_GROUPS setting to handles multiple arbitrary groups of devices
# for viewing or recording.  It is possible to have different Freevo
# channels use different Video Groups.
#
# See the wiki for more details:
#   http://doc.freevo.org/MultiTunerConfig
#   http://doc.freevo.org/Analoguemulti
#
# This example is when you have one IVTV type card installed
#
# TV_VIDEO_GROUPS = [
#     VideoGroup(vdev=TV_DEVICE,
#                adev=AUDIO_DEVICE,
#                input_type='tuner 1',
#                input_num=0,
#                tuner_norm=CONF.tv,
#                tuner_chanlist=CONF.chanlist,
#                group_type = 'ivtv',
#                desc='PVR-350 Video Group'),
# ]
#
# This example is for two normal TV cards to allow you to use one card to
# view a programme and the other card to record at the same time
#
# TV_VIDEO_GROUPS = [
#     # Use this group for watching tv
#     VideoGroup(vdev='/dev/video0',
#                adev=None,
#                input_type='tuner 1',
#                tuner_norm=CONF.tv,
#                tuner_chanlist=CONF.chanlist,
#                desc='Watching Video Group',
#                record_group=1),
#     # Use this group for recording tv
#     VideoGroup(vdev='/dev/video1',
#                adev=None,
#                input_type='tuner 1',
#                tuner_norm=CONF.tv,
#                tuner_chanlist=CONF.chanlist,
#                desc='Recording Video Group',
#                record_group=None),
# ]

#
# Settings for ivtv based cards such as the WinTV PVR-250/350.
#
# TODO: Add descriptions and valid settings for each option.
# bitrate in bps
# stream type
# Options are: 0 (mpeg2_ps), 1 (mpeg2_ts), 2 (mpeg1), 3 (mpeg2_pes_av),
#              5 (mpeg2_pes_v), 7 (mpeg2_pes_a), 10 (dvd)

# TV_IVTV_OPTIONS = {
#     'input'         : 4,
#     'resolution'    : '720x480',
#     'aspect'        : 2,
#     'audio_bitmask' : 233,
#     'bframes'       : 3,
#     'bitrate_mode'  : 1,
#     'bitrate'       : 4000000,
#     'bitrate_peak'  : 4000000,
#     'dnr_mode'      : 0,
#     'dnr_spatial'   : 0,
#     'dnr_temporal'  : 0,
#     'dnr_type'      : 0,
#     'framerate'     : 0,
#     'framespergop'  : 15,
#     'gop_closure'   : 1,
#     'pulldown'      : 0,
#     'stream_type'   : 10,
# }


#
# TV Channels. This list contains a mapping from the displayed channel name
# to the actual channel name as used by the TV watching application.
# The display name must match the names from the XMLTV guide,
# and the TV channel name must be what the tuner expects (usually a number).
#
# The TV menu is supposed to be supported by the XMLTV application for
# up to date listings, but can be used without it to just display
# the available channels.
#
# This list also determines the order in which the channels are displayed!
# N.B.: You must delete the XMLTV cache file (e.g. /var/cache/freevo/TV.xml.pickled)
#       if you make changes here and restart!
#
# Format: [('xmltv channel id', 'freevo display name', 'tv channel name'), ...]
#
# If this variable is set to None (default), Freevo will try to auto-detect
# the channel list based on the xmltv file. This doesn't work for all
# xmltv grabber, e.g. the German list doesn't contain station lists. In this
# case Freevo will output the possible list for you to add them manually.
#
# If auto-detection doesn't work or you want to edit the list, run
# freevo tv_grab -query.
#
# Setting this variable to [] will deactivate the tv guide. If you don't have
# a tv card, you may also want to add plugin.remove('tv') to remove the whole
# tv menu.
#
# All channels listed here will be displayed on the TV menu, even if they're
# not present in the XMLTV listing.
#
#
# Timedependent channels:
#
# The TV_CHANNELS-list can look like this:
#
# TV_CHANNELS = [('21', 'SVT1',              'E5'),
#                ('22', 'SVT2',              'E3'),
#                ('26', 'TV3',               'E10'),
#                ('27', 'TV4',               'E6'),
#                ('10', 'Kanal 5',           'E7'),
#                ('60', 'Fox Kids',          'E8', ('1234567','0600','1659')),
#                ('16', 'TV6',               'E8', ('1234567','1700','2359'),
#                                                  ('1234567','0000','0300')),
#                ('14', 'MTV Europe',        'E11') ]
#
# As you can see the list takes optional tuples:
# ( 'DAYS', 'START','END')
#
# 1234567 in days means all days.
# 12345 would mean monday to friday.
#
# It will display "Fox Kids" from 06:00 to 16:59 and "TV6" from 17:00 to 03:00.
# 03:00 to 06:00 it won't be displayed at all.
#

# TV_CHANNELS = None

#
# A lambda function to sort the TV_CHANNELS
#
#TV_CHANNELS_COMPARE = lambda a, b: cmp(int(a[2]), int(b[2]))

#
# TV_FREQUENCY_TABLE - This is only used when Freevo changes the channel natively.
# This is only the case if you are using V4L2 and any of the following plugins:
# timeshift, ivtv_record, ivtv_basic_tv.
# For the standard frequancy tables see src/tv/freq.py.  To add your own just
# replace tuner_id in the following example with a valid tuner id (ie: '5' or
# 'BBC1') and a frequency in KHz.  You may have as many entries as you like,
# anything here will simply override a corresponding entry in your standard
# frequency table and you can also have entries here that are not present in
# there.

# TV_FREQUENCY_TABLE = {
#     'tuner_id'   :    55250,
# }


#
# Program to grab xmltv listings. To get a grabber, you need to download
# xmltv. A possible value for users in the USA is tv_grab_na
# Use the tv_grab helper to grab the listings and cache them. Start
# 'freevo tv_grab --help' for more informations.

# XMLTV_GRABBER = ''

#
# If you want to run tv_sort on your listings add the path to tv_sort here.
# tv_sort will make sure all your programs have proper stop times, otherwise
# programs might get cut off at midnight.
#
# XMLTV_SORT = ''

#
# Number of days the grabber should get
#
# XMLTV_DAYS = 3

## ONLY ADJUST THIS IF YOUR GUIDE TIMES ARE INCORRECT ##
#
# GMT offset for XMLTV feeds that don't contain timezone information
# An example of this is the OzTivo feed which has the timestamps
# in the XML pre-adjusted for your timezone
#
# XMLTV_TIMEZONE='+0100'


# ======================================================================
# Freevo builtin encoding server settings:
# ======================================================================
# ENCODINGSERVER_UID = 0
# ENCODINGSERVER_GID = 0
#
# ENCODINGSERVER_IP   = 'localhost'
# ENCODINGSERVER_PORT = 18002
# ENCODINGSERVER_SECRET = 'secret2'
# If the current directory is not writeable as the user then set
# ENCODINGSERVER_SAVEDIR to os.path.join(FREEVO_CACHEDIR, 'encodings')
# ENCODINGSERVER_SAVEDIR = '.'

# ======================================================================
# Freevo builtin commdetect server settings:
# ======================================================================
# COMMDETECTSERVER_UID = 0
# COMMDETECTSERVER_GID = 0
#
# COMMDETECTSERVER_IP   = 'localhost'
# COMMDETECTSERVER_PORT = 6667


# ======================================================================
# Freevo builtin rss server settings:
# ======================================================================
# RSSSERVER_UID = 0
# RSSSERVER_GID = 0

# RSS_CHECK_INTERVAL = 3600
# RSS_FEEDS = '/etc/freevo/rss.feeds'
# RSS_DOWNLOAD = os.path.join(FREEVO_CACHEDIR, 'rssdownloads')
# RSS_VIDEO = '/media/video'
# RSS_AUDIO = '/media/podcasts'

# ======================================================================
# Freevo builtin WWW server settings:
# ======================================================================

#
# To activate the built in web server, uncomment the following line
#
# plugin.activate('www')

#
# Web server port number. 80 is the standard port, but is often
# taken already by apache, and cannot be used unless the server
# runs as root. Port 8080 is the default, change to 80 if
# needed.
#
# WEBSERVER_PORT = 8080

#
# Username / Password combinations to login to the web interface.
#
# WWW_USERS = {
#     "user1" : "changeme",
#     "optional" : "changeme2"
# }
#

# items to include on the web pages
# WWW_PAGES = [
#     #   Label                      Title                                  Page
#     (_('Home'),                 _('Home'),                               'index.rpy'),
#     (_('TV Guide'),             _('View TV Listings'),                   'guide.rpy'),
#     (_('Scheduled Recordings'), _('View Scheduled Recordings'),          'record.rpy'),
#     (_('Favorites'),            _('View Favorites'),                     'favorites.rpy'),
#     (_('Media Library'),        _('View Media Library'),                 'library.rpy'),
#     (_('Manual Recording'),     _('Schedule a Manual Recording'),        'manualrecord.rpy'),
#     ('Config',                    'Configuration Information',           'config.rpy'),
#     ('Plugins',                   'Plug-in Configuration Information',   'pluginconfig.rpy'),
#     ('YouTube',                   'YouTube',                             'youtube.rpy'),
#     ('Logs',                      'Logs',                                'viewlogfile.rpy'),
#     ('My Page',                   'My Page Title'                        'mypage.html'),
#     ('My Site',                   'My Site Title'                        'mysite/'),
#     (_('Search'),               _('Advanced Search Page'),               'search.rpy'),
#     (_('Help'),                 _('View Online Help and Documentation'), 'help/')
# ]

#
# Some sizes for the images in the web library
# Can be a tuple of sizes or a size
#
# WWW_IMAGE_SIZE = (1024, 768)
# WWW_IMAGE_THUMBNAIL_SIZE = 256

#
# Divide the TV guide into intervals of this length (in minutes)
#
# WWW_GUIDE_INTERVAL = 30

#
# Precision for TV guide (in minutes)
#
# WWW_GUIDE_PRECISION = 5 #

#
# Show this many blocks at once
#
# WWW_GUIDE_COLS = 6

# WWW_STYLESHEET = 'styles/main.css'

# WWW_JAVASCRIPT = 'scripts/display_prog-head.js'

# Integrate personal web pages into the web server
# WWW_PERSONAL_PAGE = [
#     ('My Page', 'a single personal web page', 'page.html'),
#     ('My Site', 'site description', 'site/'),
# ]


# ======================================================================
# Internal stuff, you shouldn't change anything here unless you know
# what you are doing
# ======================================================================

#
# Config for xml support in the movie browser
# the regexp has to be with ([0-9]|[0-9][0-9]) so we can get the numbers
#
# VIDEO_SHOW_REGEXP = "s?([0-9]|[0-9][0-9])[xe]([0-9]|[0-9][0-9])[^0-9]"

#
# Directory containing images for TV shows. A TV show matches the regular
# expression VIDEO_SHOW_REGEXP, e.g. "Name 3x10 - Title". If an image
# name.(png|jpg) (lower-case) is in this directory, it will be taken as cover
# image
#
# VIDEO_SHOW_DATA_DIR = None


#
# Remote control daemon. The server is in the Freevo main application,
# and the client is a standalone application in rc_client/
#
# ENABLE_NETWORK_REMOTE = 0
# REMOTE_CONTROL_HOST = '127.0.0.1'
# REMOTE_CONTROL_PORT = 16310


#
# Remote control daemon. Similar to the one above, but uses TCP instead
# of UDP. It is possible to send commands with a telnet client.
#
# ENABLE_TCP_NETWORK_REMOTE = 0
# REMOTE_CONTROL_TCP_HOST = '127.0.0.1'
# REMOTE_CONTROL_TCP_PORT = 16311


#
# XMLTV File
#
# This is the XMLTV file that can be optionally used for TV listings
#
# XMLTV_FILE = '/tmp/TV.xml'

#
# XML TV Logo Location
#
# Use the "makelogos.py" script to download all the
# Station logos into a directory. And then put the path
# to those logos here
# TV_LOGOS = OS_CACHEDIR + '/xmltv/logos'

# ======================================================================
# Idlebar and plugins
#
# These are the default idlebar settings, there are many more see:
# freevo plugins -l for a complete list
# To turn off use plugin.remove('idlebar.cdstatus')
#
# clock display
# %A - Full weekday name.
# %a - Abbreviated weekday name.
# %B - Full month name
# %b - Abbreviated month name
# %I - Hour (12-hour clock) as a decimal number [01,12].
# %H - Hour (24-hour clock) as a decimal number [00,23].
# %M - Minute as a decimal number [00,59].
# %m - Month as a decimal number [01,12].
# %b - Name of Month
# %d - Day of the month as a decimal number [01,31].
# %p - Locale's equivalent of either AM or PM.
# %y - Year without century as a decimal number [00,99].
# %Y - Year with century as a decimal number.
# ======================================================================
# plugin.activate('idlebar')
# plugin.activate('idlebar.tv', level=20)
# plugin.activate('idlebar.cdstatus', level=25)
# plugin.activate('idlebar.diskfree', level=30)
# plugin.activate('idlebar.clock', level=50)
# CLOCK_FORMAT = '%a %d %H:%M'
#

#
# Debugging and logging settings
#

# logging can be one of:
# CRITICAL, ERROR, WARNING, INFO, DEBUG or NOTSET
#
# debugging is a number from 0 to 9, 0 is no debugging 9 is most
#
# LOGGING = logging.DEBUG
# LOGGING_RECORDSERVER = logging.DEBUG
# DEBUG = 1
# messages go to stdout
# DEBUG_STDOUT = 0
# messages from starting a child application
# DEBUG_CHILDAPP = 1
# timing messages
# DEBUG_TIME = 0