/usr/msp430/include/msp430f47163.h is in msp430mcu 20120406-2.
This file is owned by root:root, with mode 0o644.
The actual contents of the file can be viewed below.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765 766 767 768 769 770 771 772 773 774 775 776 777 778 779 780 781 782 783 784 785 786 787 788 789 790 791 792 793 794 795 796 797 798 799 800 801 802 803 804 805 806 807 808 809 810 811 812 813 814 815 816 817 818 819 820 821 822 823 824 825 826 827 828 829 830 831 832 833 834 835 836 837 838 839 840 841 842 843 844 845 846 847 848 849 850 851 852 853 854 855 856 857 858 859 860 861 862 863 864 865 866 867 868 869 870 871 872 873 874 875 876 877 878 879 880 881 882 883 884 885 886 887 888 889 890 891 892 893 894 895 896 897 898 899 900 901 902 903 904 905 906 907 908 909 910 911 912 913 914 915 916 917 918 919 920 921 922 923 924 925 926 927 928 929 930 931 932 933 934 935 936 937 938 939 940 941 942 943 944 945 946 947 948 949 950 951 952 953 954 955 956 957 958 959 960 961 962 963 964 965 966 967 968 969 970 971 972 973 974 975 976 977 978 979 980 981 982 983 984 985 986 987 988 989 990 991 992 993 994 995 996 997 998 999 1000 1001 1002 1003 1004 1005 1006 1007 1008 1009 1010 1011 1012 1013 1014 1015 1016 1017 1018 1019 1020 1021 1022 1023 1024 1025 1026 1027 1028 1029 1030 1031 1032 1033 1034 1035 1036 1037 1038 1039 1040 1041 1042 1043 1044 1045 1046 1047 1048 1049 1050 1051 1052 1053 1054 1055 1056 1057 1058 1059 1060 1061 1062 1063 1064 1065 1066 1067 1068 1069 1070 1071 1072 1073 1074 1075 1076 1077 1078 1079 1080 1081 1082 1083 1084 1085 1086 1087 1088 1089 1090 1091 1092 1093 1094 1095 1096 1097 1098 1099 1100 1101 1102 1103 1104 1105 1106 1107 1108 1109 1110 1111 1112 1113 1114 1115 1116 1117 1118 1119 1120 1121 1122 1123 1124 1125 1126 1127 1128 1129 1130 1131 1132 1133 1134 1135 1136 1137 1138 1139 1140 1141 1142 1143 1144 1145 1146 1147 1148 1149 1150 1151 1152 1153 1154 1155 1156 1157 1158 1159 1160 1161 1162 1163 1164 1165 1166 1167 1168 1169 1170 1171 1172 1173 1174 1175 1176 1177 1178 1179 1180 1181 1182 1183 1184 1185 1186 1187 1188 1189 1190 1191 1192 1193 1194 1195 1196 1197 1198 1199 1200 1201 1202 1203 1204 1205 1206 1207 1208 1209 1210 1211 1212 1213 1214 1215 1216 1217 1218 1219 1220 1221 1222 1223 1224 1225 1226 1227 1228 1229 1230 1231 1232 1233 1234 1235 1236 1237 1238 1239 1240 1241 1242 1243 1244 1245 1246 1247 1248 1249 1250 1251 1252 1253 1254 1255 1256 1257 1258 1259 1260 1261 1262 1263 1264 1265 1266 1267 1268 1269 1270 1271 1272 1273 1274 1275 1276 1277 1278 1279 1280 1281 1282 1283 1284 1285 1286 1287 1288 1289 1290 1291 1292 1293 1294 1295 1296 1297 1298 1299 1300 1301 1302 1303 1304 1305 1306 1307 1308 1309 1310 1311 1312 1313 1314 1315 1316 1317 1318 1319 1320 1321 1322 1323 1324 1325 1326 1327 1328 1329 1330 1331 1332 1333 1334 1335 1336 1337 1338 1339 1340 1341 1342 1343 1344 1345 1346 1347 1348 1349 1350 1351 1352 1353 1354 1355 1356 1357 1358 1359 1360 1361 1362 1363 1364 1365 1366 1367 1368 1369 1370 1371 1372 1373 1374 1375 1376 1377 1378 1379 1380 1381 1382 1383 1384 1385 1386 1387 1388 1389 1390 1391 1392 1393 1394 1395 1396 1397 1398 1399 1400 1401 1402 1403 1404 1405 1406 1407 1408 1409 1410 1411 1412 1413 1414 1415 1416 1417 1418 1419 1420 1421 1422 1423 1424 1425 1426 1427 1428 1429 1430 1431 1432 1433 1434 1435 1436 1437 1438 1439 1440 1441 1442 1443 1444 1445 1446 1447 1448 1449 1450 1451 1452 1453 1454 1455 1456 1457 1458 1459 1460 1461 1462 1463 1464 1465 1466 1467 1468 1469 1470 1471 1472 1473 1474 1475 1476 1477 1478 1479 1480 1481 1482 1483 1484 1485 1486 1487 1488 1489 1490 1491 1492 1493 1494 1495 1496 1497 1498 1499 1500 1501 1502 1503 1504 1505 1506 1507 1508 1509 1510 1511 1512 1513 1514 1515 1516 1517 1518 1519 1520 1521 1522 1523 1524 1525 1526 1527 1528 1529 1530 1531 1532 1533 1534 1535 1536 1537 1538 1539 1540 1541 1542 1543 1544 1545 1546 1547 1548 1549 1550 1551 1552 1553 1554 1555 1556 1557 1558 1559 1560 1561 1562 1563 1564 1565 1566 1567 1568 1569 1570 1571 1572 1573 1574 1575 1576 1577 1578 1579 1580 1581 1582 1583 1584 1585 1586 1587 1588 1589 1590 1591 1592 1593 1594 1595 1596 1597 1598 1599 1600 1601 1602 1603 1604 1605 1606 1607 1608 1609 1610 1611 1612 1613 1614 1615 1616 1617 1618 1619 1620 1621 1622 1623 1624 1625 1626 1627 1628 1629 1630 1631 1632 1633 1634 1635 1636 1637 1638 1639 1640 1641 1642 1643 1644 1645 1646 1647 1648 1649 1650 1651 1652 1653 1654 1655 1656 1657 1658 1659 1660 1661 1662 1663 1664 1665 1666 1667 1668 1669 1670 1671 1672 1673 1674 1675 1676 1677 1678 1679 1680 1681 1682 1683 1684 1685 1686 1687 1688 1689 1690 1691 1692 1693 1694 1695 1696 1697 1698 1699 1700 1701 1702 1703 1704 1705 1706 1707 1708 1709 1710 1711 1712 1713 1714 1715 1716 1717 1718 1719 1720 1721 1722 1723 1724 1725 1726 1727 1728 1729 1730 1731 1732 1733 1734 1735 1736 1737 1738 1739 1740 1741 1742 1743 1744 1745 1746 1747 1748 1749 1750 1751 1752 1753 1754 1755 1756 1757 1758 1759 1760 1761 1762 1763 1764 1765 1766 1767 1768 1769 1770 1771 1772 1773 1774 1775 1776 1777 1778 1779 1780 1781 1782 1783 1784 1785 1786 1787 1788 1789 1790 1791 1792 1793 1794 1795 1796 1797 1798 1799 1800 1801 1802 1803 1804 1805 1806 1807 1808 1809 1810 1811 1812 1813 1814 1815 1816 1817 1818 1819 1820 1821 | /* ============================================================================ */
/* Copyright (c) 2012, Texas Instruments Incorporated */
/* All rights reserved. */
/* */
/* Redistribution and use in source and binary forms, with or without */
/* modification, are permitted provided that the following conditions */
/* are met: */
/* */
/* * Redistributions of source code must retain the above copyright */
/* notice, this list of conditions and the following disclaimer. */
/* */
/* * Redistributions in binary form must reproduce the above copyright */
/* notice, this list of conditions and the following disclaimer in the */
/* documentation and/or other materials provided with the distribution. */
/* */
/* * Neither the name of Texas Instruments Incorporated nor the names of */
/* its contributors may be used to endorse or promote products derived */
/* from this software without specific prior written permission. */
/* */
/* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" */
/* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, */
/* THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR */
/* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR */
/* CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, */
/* EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, */
/* PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; */
/* OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, */
/* WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR */
/* OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, */
/* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */
/* ============================================================================ */
/********************************************************************
*
* Standard register and bit definitions for the Texas Instruments
* MSP430 microcontroller.
*
* This file supports assembler and C development for
* MSP430x471x3 devices.
*
* Texas Instruments, Version 1.2
*
* Rev. 1.0, First Release
* Rev. 1.1, Corrected OSCCAP settings
* Rev. 1.2, Fixed Definition SD16MEMx, SD16IV
*
*
********************************************************************/
#ifndef __msp430x471x3
#define __msp430x471x3
#define __MSP430_HEADER_VERSION__ 1064
#define __MSP430_TI_HEADERS__
#ifdef __cplusplus
extern "C" {
#endif
#include <iomacros.h>
/************************************************************
* STANDARD BITS
************************************************************/
#define BIT0 (0x0001)
#define BIT1 (0x0002)
#define BIT2 (0x0004)
#define BIT3 (0x0008)
#define BIT4 (0x0010)
#define BIT5 (0x0020)
#define BIT6 (0x0040)
#define BIT7 (0x0080)
#define BIT8 (0x0100)
#define BIT9 (0x0200)
#define BITA (0x0400)
#define BITB (0x0800)
#define BITC (0x1000)
#define BITD (0x2000)
#define BITE (0x4000)
#define BITF (0x8000)
/************************************************************
* STATUS REGISTER BITS
************************************************************/
#define C (0x0001)
#define Z (0x0002)
#define N (0x0004)
#define V (0x0100)
#define GIE (0x0008)
#define CPUOFF (0x0010)
#define OSCOFF (0x0020)
#define SCG0 (0x0040)
#define SCG1 (0x0080)
/* Low Power Modes coded with Bits 4-7 in SR */
#ifndef __STDC__ /* Begin #defines for assembler */
#define LPM0 (CPUOFF)
#define LPM1 (SCG0+CPUOFF)
#define LPM2 (SCG1+CPUOFF)
#define LPM3 (SCG1+SCG0+CPUOFF)
#define LPM4 (SCG1+SCG0+OSCOFF+CPUOFF)
/* End #defines for assembler */
#else /* Begin #defines for C */
#define LPM0_bits (CPUOFF)
#define LPM1_bits (SCG0+CPUOFF)
#define LPM2_bits (SCG1+CPUOFF)
#define LPM3_bits (SCG1+SCG0+CPUOFF)
#define LPM4_bits (SCG1+SCG0+OSCOFF+CPUOFF)
#include "in430.h"
#define LPM0 _BIS_SR(LPM0_bits) /* Enter Low Power Mode 0 */
#define LPM0_EXIT _BIC_SR_IRQ(LPM0_bits) /* Exit Low Power Mode 0 */
#define LPM1 _BIS_SR(LPM1_bits) /* Enter Low Power Mode 1 */
#define LPM1_EXIT _BIC_SR_IRQ(LPM1_bits) /* Exit Low Power Mode 1 */
#define LPM2 _BIS_SR(LPM2_bits) /* Enter Low Power Mode 2 */
#define LPM2_EXIT _BIC_SR_IRQ(LPM2_bits) /* Exit Low Power Mode 2 */
#define LPM3 _BIS_SR(LPM3_bits) /* Enter Low Power Mode 3 */
#define LPM3_EXIT _BIC_SR_IRQ(LPM3_bits) /* Exit Low Power Mode 3 */
#define LPM4 _BIS_SR(LPM4_bits) /* Enter Low Power Mode 4 */
#define LPM4_EXIT _BIC_SR_IRQ(LPM4_bits) /* Exit Low Power Mode 4 */
#endif /* End #defines for C */
/************************************************************
* CPU
************************************************************/
#define __MSP430_HAS_MSP430X_CPU__ /* Definition to show that it has MSP430X CPU */
/************************************************************
* PERIPHERAL FILE MAP
************************************************************/
/************************************************************
* SPECIAL FUNCTION REGISTER ADDRESSES + CONTROL BITS
************************************************************/
#define IE1_ 0x0000 /* Interrupt Enable 1 */
sfrb(IE1, IE1_);
#define WDTIE (0x01) /* Watchdog Interrupt Enable */
#define OFIE (0x02) /* Osc. Fault Interrupt Enable */
#define NMIIE (0x10) /* NMI Interrupt Enable */
#define ACCVIE (0x20) /* Flash Access Violation Interrupt Enable */
#define IFG1_ 0x0002 /* Interrupt Flag 1 */
sfrb(IFG1, IFG1_);
#define WDTIFG (0x01) /* WDT Interrupt Flag */
#define OFIFG (0x02) /* Osc. Fault Interrupt Flag */
#define PORIFG (0x04) /* Power On Interrupt Flag */
#define RSTIFG (0x08) /* Reset Interrupt Flag */
#define NMIIFG (0x10) /* NMI Interrupt Flag */
#define IE2_ 0x0001 /* Interrupt Enable 2 */
sfrb(IE2, IE2_);
#define UC0IE IE2
#define UCA0RXIE (0x01)
#define UCA0TXIE (0x02)
#define UCB0RXIE (0x04)
#define UCB0TXIE (0x08)
#define BTIE (0x80)
#define IFG2_ 0x0003 /* Interrupt Flag 2 */
sfrb(IFG2, IFG2_);
#define UC0IFG IFG2
#define UCA0RXIFG (0x01)
#define UCA0TXIFG (0x02)
#define UCB0RXIFG (0x04)
#define UCB0TXIFG (0x08)
#define BTIFG (0x80)
#define UC1IE_ 0x0006 /* USCI 1 Interrupt Enable */
sfrb(UC1IE, UC1IE_);
#define UCA1RXIE (0x01)
#define UCA1TXIE (0x02)
#define UCB1RXIE (0x04)
#define UCB1TXIE (0x08)
#define UC1IFG_ 0x0007 /* ISCI 1 Interrupt Flags */
sfrb(UC1IFG, UC1IFG_);
#define UCA1RXIFG (0x01)
#define UCA1TXIFG (0x02)
#define UCB1RXIFG (0x04)
#define UCB1TXIFG (0x08)
/************************************************************
* BASIC TIMER with Real Time Clock
************************************************************/
#define __MSP430_HAS_BT_RTC__ /* Definition to show that Module is available */
#define BTCTL_ 0x0040 /* Basic Timer Control */
sfrb(BTCTL, BTCTL_);
#define RTCCTL_ 0x0041 /* Real Time Clock Control */
sfrb(RTCCTL, RTCCTL_);
#define RTCNT1_ 0x0042 /* Real Time Counter 1 */
sfrb(RTCNT1, RTCNT1_);
#define RTCNT2_ 0x0043 /* Real Time Counter 2 */
sfrb(RTCNT2, RTCNT2_);
#define RTCNT3_ 0x0044 /* Real Time Counter 3 */
sfrb(RTCNT3, RTCNT3_);
#define RTCNT4_ 0x0045 /* Real Time Counter 4 */
sfrb(RTCNT4, RTCNT4_);
#define BTCNT1_ 0x0046 /* Basic Timer Count 1 */
sfrb(BTCNT1, BTCNT1_);
#define BTCNT2_ 0x0047 /* Basic Timer Count 2 */
sfrb(BTCNT2, BTCNT2_);
#define RTCDAY_ 0x004C /* Real Time Clock Day */
sfrb(RTCDAY, RTCDAY_);
#define RTCMON_ 0x004D /* Real Time Clock Month */
sfrb(RTCMON, RTCMON_);
#define RTCYEARL_ 0x004E /* Real Time Clock Year (Low Byte) */
sfrb(RTCYEARL, RTCYEARL_);
#define RTCYEARH_ 0x004F /* Real Time Clock Year (High Byte) */
sfrb(RTCYEARH, RTCYEARH_);
#define RTCSEC RTCNT1
#define RTCMIN RTCNT2
#define RTCHOUR RTCNT3
#define RTCDOW RTCNT4
#define RTCTL_ 0x0040 /* Basic/Real Timer Control */
sfrw(RTCTL, RTCTL_);
#define RTCTIM0_ 0x0042 /* Real Time Clock Time 0 */
sfrw(RTCTIM0, RTCTIM0_);
#define RTCTIM1_ 0x0044 /* Real Time Clock Time 1 */
sfrw(RTCTIM1, RTCTIM1_);
#define BTCNT12_ 0x0046 /* Basic Timer Count 1/2 */
sfrw(BTCNT12, BTCNT12_);
#define RTCDATE_ 0x004C /* Real Time Clock Date */
sfrw(RTCDATE, RTCDATE_);
#define RTCYEAR_ 0x004E /* Real Time Clock Year */
sfrw(RTCYEAR, RTCYEAR_);
#define RTCNT12 RTCTIM0
#define RTCNT34 RTCTIM1
#define BTSSEL (0x80) /* fBT = fMCLK (main clock) */
#define BTHOLD (0x40) /* BT1 is held if this bit is set */
#define BTDIV (0x20) /* fCLK2 = ACLK:256 */
//#define res (0x10)
//#define res (0x08)
#define BTIP2 (0x04)
#define BTIP1 (0x02)
#define BTIP0 (0x01)
#define RTCBCD (0x80) /* RTC BCD Select */
#define RTCHOLD (0x40) /* RTC Hold */
#define RTCMODE1 (0x20) /* RTC Mode 1 */
#define RTCMODE0 (0x10) /* RTC Mode 0 */
#define RTCTEV1 (0x08) /* RTC Time Event 1 */
#define RTCTEV0 (0x04) /* RTC Time Event 0 */
#define RTCIE (0x02) /* RTC Interrupt Enable */
#define RTCFG (0x01) /* RTC Event Flag */
#define RTCTEV_0 (0x00) /* RTC Time Event: 0 */
#define RTCTEV_1 (0x04) /* RTC Time Event: 1 */
#define RTCTEV_2 (0x08) /* RTC Time Event: 2 */
#define RTCTEV_3 (0x0C) /* RTC Time Event: 3 */
#define RTCMODE_0 (0x00) /* RTC Mode: 0 */
#define RTCMODE_1 (0x10) /* RTC Mode: 1 */
#define RTCMODE_2 (0x20) /* RTC Mode: 2 */
#define RTCMODE_3 (0x30) /* RTC Mode: 3 */
/* Frequency of the BTCNT2 coded with Bit 5 and 7 in BTCTL */
#define BT_fCLK2_ACLK (0x00)
#define BT_fCLK2_ACLK_DIV256 (BTDIV)
#define BT_fCLK2_MCLK (BTSSEL)
/* Interrupt interval time fINT coded with Bits 0-2 in BTCTL */
#define BT_fCLK2_DIV2 (0x00) /* fINT = fCLK2:2 (default) */
#define BT_fCLK2_DIV4 (BTIP0) /* fINT = fCLK2:4 */
#define BT_fCLK2_DIV8 (BTIP1) /* fINT = fCLK2:8 */
#define BT_fCLK2_DIV16 (BTIP1+BTIP0) /* fINT = fCLK2:16 */
#define BT_fCLK2_DIV32 (BTIP2) /* fINT = fCLK2:32 */
#define BT_fCLK2_DIV64 (BTIP2+BTIP0) /* fINT = fCLK2:64 */
#define BT_fCLK2_DIV128 (BTIP2+BTIP1) /* fINT = fCLK2:128 */
#define BT_fCLK2_DIV256 (BTIP2+BTIP1+BTIP0) /* fINT = fCLK2:256 */
/* with assumed vlues of fACLK=32KHz, fMCLK=1MHz */
/* fBT=fACLK is thought for longer interval times */
#define BT_ADLY_0_064 (0x00) /* 0.064ms interval (default) */
#define BT_ADLY_0_125 (BTIP0) /* 0.125ms " */
#define BT_ADLY_0_25 (BTIP1) /* 0.25ms " */
#define BT_ADLY_0_5 (BTIP1+BTIP0) /* 0.5ms " */
#define BT_ADLY_1 (BTIP2) /* 1ms " */
#define BT_ADLY_2 (BTIP2+BTIP0) /* 2ms " */
#define BT_ADLY_4 (BTIP2+BTIP1) /* 4ms " */
#define BT_ADLY_8 (BTIP2+BTIP1+BTIP0) /* 8ms " */
#define BT_ADLY_16 (BTDIV) /* 16ms " */
#define BT_ADLY_32 (BTDIV+BTIP0) /* 32ms " */
#define BT_ADLY_64 (BTDIV+BTIP1) /* 64ms " */
#define BT_ADLY_125 (BTDIV+BTIP1+BTIP0) /* 125ms " */
#define BT_ADLY_250 (BTDIV+BTIP2) /* 250ms " */
#define BT_ADLY_500 (BTDIV+BTIP2+BTIP0) /* 500ms " */
#define BT_ADLY_1000 (BTDIV+BTIP2+BTIP1) /* 1000ms " */
#define BT_ADLY_2000 (BTDIV+BTIP2+BTIP1+BTIP0) /* 2000ms " */
/* fCLK2=fMCLK (1MHz) is thought for short interval times */
/* the timing for short intervals is more precise than ACLK */
/* NOTE */
/* Be sure that the SCFQCTL-Register is set to 01Fh so that fMCLK=1MHz */
/* Too low interval time results in interrupts too frequent for the processor to handle! */
#define BT_MDLY_0_002 (BTSSEL) /* 0.002ms interval *** interval times */
#define BT_MDLY_0_004 (BTSSEL+BTIP0) /* 0.004ms " *** too short for */
#define BT_MDLY_0_008 (BTSSEL+BTIP1) /* 0.008ms " *** interrupt */
#define BT_MDLY_0_016 (BTSSEL+BTIP1+BTIP0) /* 0.016ms " *** handling */
#define BT_MDLY_0_032 (BTSSEL+BTIP2) /* 0.032ms " */
#define BT_MDLY_0_064 (BTSSEL+BTIP2+BTIP0) /* 0.064ms " */
#define BT_MDLY_0_125 (BTSSEL+BTIP2+BTIP1) /* 0.125ms " */
#define BT_MDLY_0_25 (BTSSEL+BTIP2+BTIP1+BTIP0)/* 0.25ms " */
/* Hold coded with Bits 6-7 in BT(1)CTL */
/* this is for BT */
#define BTHOLD_CNT1 (BTHOLD) /* BTCNT1 is held while BTHOLD is set */
#define BTHOLD_CNT1_2 (BTHOLD+BTDIV) /* BT1CNT1 .AND. BT1CNT2 are held while ~ is set */
/* INTERRUPT CONTROL BITS */
/* #define BTIE 0x80 */
/* #define BTIFG 0x80 */
/************************************************************
* Comparator A
************************************************************/
#define __MSP430_HAS_COMPA__ /* Definition to show that Module is available */
#define CACTL1_ 0x0059 /* Comparator A Control 1 */
sfrb(CACTL1, CACTL1_);
#define CACTL2_ 0x005A /* Comparator A Control 2 */
sfrb(CACTL2, CACTL2_);
#define CAPD_ 0x005B /* Comparator A Port Disable */
sfrb(CAPD, CAPD_);
#define CAIFG (0x01) /* Comp. A Interrupt Flag */
#define CAIE (0x02) /* Comp. A Interrupt Enable */
#define CAIES (0x04) /* Comp. A Int. Edge Select: 0:rising / 1:falling */
#define CAON (0x08) /* Comp. A enable */
#define CAREF0 (0x10) /* Comp. A Internal Reference Select 0 */
#define CAREF1 (0x20) /* Comp. A Internal Reference Select 1 */
#define CARSEL (0x40) /* Comp. A Internal Reference Enable */
#define CAEX (0x80) /* Comp. A Exchange Inputs */
#define CAREF_0 (0x00) /* Comp. A Int. Ref. Select 0 : Off */
#define CAREF_1 (0x10) /* Comp. A Int. Ref. Select 1 : 0.25*Vcc */
#define CAREF_2 (0x20) /* Comp. A Int. Ref. Select 2 : 0.5*Vcc */
#define CAREF_3 (0x30) /* Comp. A Int. Ref. Select 3 : Vt*/
#define CAOUT (0x01) /* Comp. A Output */
#define CAF (0x02) /* Comp. A Enable Output Filter */
#define P2CA0 (0x04) /* Comp. A Connect External Signal to CA0 : 1 */
#define P2CA1 (0x08) /* Comp. A Connect External Signal to CA1 : 1 */
#define CACTL24 (0x10)
#define CACTL25 (0x20)
#define CACTL26 (0x40)
#define CACTL27 (0x80)
#define CAPD0 (0x01) /* Comp. A Disable Input Buffer of Port Register .0 */
#define CAPD1 (0x02) /* Comp. A Disable Input Buffer of Port Register .1 */
#define CAPD2 (0x04) /* Comp. A Disable Input Buffer of Port Register .2 */
#define CAPD3 (0x08) /* Comp. A Disable Input Buffer of Port Register .3 */
#define CAPD4 (0x10) /* Comp. A Disable Input Buffer of Port Register .4 */
#define CAPD5 (0x20) /* Comp. A Disable Input Buffer of Port Register .5 */
#define CAPD6 (0x40) /* Comp. A Disable Input Buffer of Port Register .6 */
#define CAPD7 (0x80) /* Comp. A Disable Input Buffer of Port Register .7 */
/************************************************************
* DMA_X
************************************************************/
#define __MSP430_HAS_DMAX_3__ /* Definition to show that Module is available */
#define DMACTL0_ 0x0122 /* DMA Module Control 0 */
sfrw(DMACTL0, DMACTL0_);
#define DMA0TSEL0 (0x0001) /* DMA channel 0 transfer select bit 0 */
#define DMA0TSEL1 (0x0002) /* DMA channel 0 transfer select bit 1 */
#define DMA0TSEL2 (0x0004) /* DMA channel 0 transfer select bit 2 */
#define DMA0TSEL3 (0x0008) /* DMA channel 0 transfer select bit 3 */
#define DMA1TSEL0 (0x0010) /* DMA channel 1 transfer select bit 0 */
#define DMA1TSEL1 (0x0020) /* DMA channel 1 transfer select bit 1 */
#define DMA1TSEL2 (0x0040) /* DMA channel 1 transfer select bit 2 */
#define DMA1TSEL3 (0x0080) /* DMA channel 1 transfer select bit 3 */
#define DMA2TSEL0 (0x0100) /* DMA channel 2 transfer select bit 0 */
#define DMA2TSEL1 (0x0200) /* DMA channel 2 transfer select bit 1 */
#define DMA2TSEL2 (0x0400) /* DMA channel 2 transfer select bit 2 */
#define DMA2TSEL3 (0x0800) /* DMA channel 2 transfer select bit 3 */
#define DMA0TSEL_0 (0x0000) /* DMA channel 0 transfer select 0: DMA_REQ (sw)*/
#define DMA0TSEL_1 (0x0001) /* DMA channel 0 transfer select 1: Timer_A (TACCR2.IFG) */
#define DMA0TSEL_2 (0x0002) /* DMA channel 0 transfer select 2: Timer_B (TBCCR2.IFG) */
#define DMA0TSEL_3 (0x0003) /* DMA channel 0 transfer select 3: USCIA0 receive */
#define DMA0TSEL_4 (0x0004) /* DMA channel 0 transfer select 4: USCIA0 transmit */
#define DMA0TSEL_5 (0x0005) /* DMA channel 0 transfer select 5: Reserved */
#define DMA0TSEL_6 (0x0006) /* DMA channel 0 transfer select 6: SD16 (SD16IFG) */
#define DMA0TSEL_7 (0x0007) /* DMA channel 0 transfer select 7: Timer_A (TACCR0.IFG) */
#define DMA0TSEL_8 (0x0008) /* DMA channel 0 transfer select 8: Timer_B (TBCCR0.IFG) */
#define DMA0TSEL_9 (0x0009) /* DMA channel 0 transfer select 9: USCIA1 receive */
#define DMA0TSEL_10 (0x000A) /* DMA channel 0 transfer select 10: USCIA1 transmit */
#define DMA0TSEL_11 (0x000B) /* DMA channel 0 transfer select 11: Multiplier ready */
#define DMA0TSEL_12 (0x000C) /* DMA channel 0 transfer select 12: USCIB0 receive */
#define DMA0TSEL_13 (0x000D) /* DMA channel 0 transfer select 13: USCIB0 transmit */
#define DMA0TSEL_14 (0x000E) /* DMA channel 0 transfer select 14: previous DMA channel DMA2IFG */
#define DMA0TSEL_15 (0x000F) /* DMA channel 0 transfer select 15: ext. Trigger (DMAE0) */
#define DMA1TSEL_0 (0x0000) /* DMA channel 1 transfer select 0: DMA_REQ */
#define DMA1TSEL_1 (0x0010) /* DMA channel 1 transfer select 1: Timer_A CCRIFG.2 */
#define DMA1TSEL_2 (0x0020) /* DMA channel 1 transfer select 2: Timer_B CCRIFG.2 */
#define DMA1TSEL_3 (0x0030) /* DMA channel 1 transfer select 3: USCIA0 receive */
#define DMA1TSEL_4 (0x0040) /* DMA channel 1 transfer select 4: USCIA0 transmit */
#define DMA1TSEL_5 (0x0050) /* DMA channel 1 transfer select 5: Reserved */
#define DMA1TSEL_6 (0x0060) /* DMA channel 1 transfer select 6: SD16 (SD16IFG) */
#define DMA1TSEL_7 (0x0070) /* DMA channel 1 transfer select 7: Timer_A (TACCR0.IFG) */
#define DMA1TSEL_8 (0x0080) /* DMA channel 1 transfer select 8: Timer_B (TBCCR0.IFG) */
#define DMA1TSEL_9 (0x0090) /* DMA channel 1 transfer select 9: USCIA1 receive */
#define DMA1TSEL_10 (0x00A0) /* DMA channel 1 transfer select 10: USCIA1 transmit */
#define DMA1TSEL_11 (0x00B0) /* DMA channel 1 transfer select 11: Multiplier ready */
#define DMA1TSEL_12 (0x00C0) /* DMA channel 1 transfer select 12: USCIB0 receive */
#define DMA1TSEL_13 (0x00D0) /* DMA channel 1 transfer select 13: USCIB0 transmit */
#define DMA1TSEL_14 (0x00E0) /* DMA channel 1 transfer select 14: previous DMA channel DMA0IFG */
#define DMA1TSEL_15 (0x00F0) /* DMA channel 1 transfer select 15: ext. Trigger (DMAE0) */
#define DMA2TSEL_0 (0x0000) /* DMA channel 2 transfer select 0: DMA_REQ */
#define DMA2TSEL_1 (0x0100) /* DMA channel 2 transfer select 1: Timer_A CCRIFG.2 */
#define DMA2TSEL_2 (0x0200) /* DMA channel 2 transfer select 2: Timer_B CCRIFG.2 */
#define DMA2TSEL_3 (0x0300) /* DMA channel 2 transfer select 3: USCIA0 receive */
#define DMA2TSEL_4 (0x0400) /* DMA channel 2 transfer select 4: USCIA0 transmit */
#define DMA2TSEL_5 (0x0500) /* DMA channel 2 transfer select 5: Reserved */
#define DMA2TSEL_6 (0x0600) /* DMA channel 2 transfer select 6: SD16 (SD16IFG) */
#define DMA2TSEL_7 (0x0700) /* DMA channel 2 transfer select 7: Timer_A (TACCR0.IFG) */
#define DMA2TSEL_8 (0x0800) /* DMA channel 2 transfer select 8: Timer_B (TBCCR0.IFG) */
#define DMA2TSEL_9 (0x0900) /* DMA channel 2 transfer select 9: USCIA1 receive */
#define DMA2TSEL_10 (0x0A00) /* DMA channel 2 transfer select 10: USCIA1 transmit */
#define DMA2TSEL_11 (0x0B00) /* DMA channel 2 transfer select 11: Multiplier ready */
#define DMA2TSEL_12 (0x0C00) /* DMA channel 2 transfer select 12: USCIB0 receive */
#define DMA2TSEL_13 (0x0D00) /* DMA channel 2 transfer select 13: USCIB0 transmit */
#define DMA2TSEL_14 (0x0E00) /* DMA channel 2 transfer select 14: previous DMA channel DMA1IFG */
#define DMA2TSEL_15 (0x0F00) /* DMA channel 2 transfer select 15: ext. Trigger (DMAE0) */
#define DMACTL1_ 0x0124 /* DMA Module Control 1 */
sfrw(DMACTL1, DMACTL1_);
#define ENNMI (0x0001) /* Enable NMI interruption of DMA */
#define ROUNDROBIN (0x0002) /* Round-Robin DMA channel priorities */
#define DMAONFETCH (0x0004) /* DMA transfer on instruction fetch */
#define DMAIV_ 0x0126 /* DMA Interrupt Vector Word */
sfrw(DMAIV, DMAIV_);
#define DMA0CTL_ 0x01d0 /* DMA Channel 0 Control */
sfrw(DMA0CTL, DMA0CTL_);
#define DMA1CTL_ 0x01dc /* DMA Channel 1 Control */
sfrw(DMA1CTL, DMA1CTL_);
#define DMA2CTL_ 0x01e8 /* DMA Channel 2 Control */
sfrw(DMA2CTL, DMA2CTL_);
#define DMAREQ (0x0001) /* Initiate DMA transfer with DMATSEL */
#define DMAABORT (0x0002) /* DMA transfer aborted by NMI */
#define DMAIE (0x0004) /* DMA interrupt enable */
#define DMAIFG (0x0008) /* DMA interrupt flag */
#define DMAEN (0x0010) /* DMA enable */
#define DMALEVEL (0x0020) /* DMA level sensitive trigger select */
#define DMASRCBYTE (0x0040) /* DMA source byte */
#define DMADSTBYTE (0x0080) /* DMA destination byte */
#define DMASRCINCR0 (0x0100) /* DMA source increment bit 0 */
#define DMASRCINCR1 (0x0200) /* DMA source increment bit 1 */
#define DMADSTINCR0 (0x0400) /* DMA destination increment bit 0 */
#define DMADSTINCR1 (0x0800) /* DMA destination increment bit 1 */
#define DMADT0 (0x1000) /* DMA transfer mode bit 0 */
#define DMADT1 (0x2000) /* DMA transfer mode bit 1 */
#define DMADT2 (0x4000) /* DMA transfer mode bit 2 */
#define DMASWDW (0x0000) /* DMA transfer: source word to destination word */
#define DMASBDW (0x0040) /* DMA transfer: source byte to destination word */
#define DMASWDB (0x0080) /* DMA transfer: source word to destination byte */
#define DMASBDB (0x00C0) /* DMA transfer: source byte to destination byte */
#define DMASRCINCR_0 (0x0000) /* DMA source increment 0: source address unchanged */
#define DMASRCINCR_1 (0x0100) /* DMA source increment 1: source address unchanged */
#define DMASRCINCR_2 (0x0200) /* DMA source increment 2: source address decremented */
#define DMASRCINCR_3 (0x0300) /* DMA source increment 3: source address incremented */
#define DMADSTINCR_0 (0x0000) /* DMA destination increment 0: destination address unchanged */
#define DMADSTINCR_1 (0x0400) /* DMA destination increment 1: destination address unchanged */
#define DMADSTINCR_2 (0x0800) /* DMA destination increment 2: destination address decremented */
#define DMADSTINCR_3 (0x0C00) /* DMA destination increment 3: destination address incremented */
#define DMADT_0 (0x0000) /* DMA transfer mode 0: single */
#define DMADT_1 (0x1000) /* DMA transfer mode 1: block */
#define DMADT_2 (0x2000) /* DMA transfer mode 2: interleaved */
#define DMADT_3 (0x3000) /* DMA transfer mode 3: interleaved */
#define DMADT_4 (0x4000) /* DMA transfer mode 4: single, repeat */
#define DMADT_5 (0x5000) /* DMA transfer mode 5: block, repeat */
#define DMADT_6 (0x6000) /* DMA transfer mode 6: interleaved, repeat */
#define DMADT_7 (0x7000) /* DMA transfer mode 7: interleaved, repeat */
#define DMA0SA_ 0x01d2 /* DMA Channel 0 Source Address */
sfra(DMA0SA, DMA0SA_);
#define DMA0SAL_ 0x01d2 /* DMA Channel 0 Source Address */
sfrw(DMA0SAL, DMA0SAL_);
#define DMA0DA_ 0x01d6 /* DMA Channel 0 Destination Address */
sfra(DMA0DA, DMA0DA_);
#define DMA0DAL_ 0x01d6 /* DMA Channel 0 Destination Address */
sfrw(DMA0DAL, DMA0DAL_);
#define DMA0SZ_ 0x01da /* DMA Channel 0 Transfer Size */
sfrw(DMA0SZ, DMA0SZ_);
#define DMA1SA_ 0x01de /* DMA Channel 1 Source Address */
sfra(DMA1SA, DMA1SA_);
#define DMA1SAL_ 0x01de /* DMA Channel 1 Source Address */
sfrw(DMA1SAL, DMA1SAL_);
#define DMA1DA_ 0x01e2 /* DMA Channel 1 Destination Address */
sfra(DMA1DA, DMA1DA_);
#define DMA1DAL_ 0x01e2 /* DMA Channel 1 Destination Address */
sfrw(DMA1DAL, DMA1DAL_);
#define DMA1SZ_ 0x01e6 /* DMA Channel 1 Transfer Size */
sfrw(DMA1SZ, DMA1SZ_);
#define DMA2SA_ 0x01ea /* DMA Channel 2 Source Address */
sfra(DMA2SA, DMA2SA_);
#define DMA2SAL_ 0x01ea /* DMA Channel 2 Source Address */
sfrw(DMA2SAL, DMA2SAL_);
#define DMA2DA_ 0x01ee /* DMA Channel 2 Destination Address */
sfra(DMA2DA, DMA2DA_);
#define DMA2DAL_ 0x01ee /* DMA Channel 2 Destination Address */
sfrw(DMA2DAL, DMA2DAL_);
#define DMA2SZ_ 0x01f2 /* DMA Channel 2 Transfer Size */
sfrw(DMA2SZ, DMA2SZ_);
/* DMAIV Definitions */
#define DMAIV_NONE (0x0000) /* No Interrupt pending */
#define DMAIV_DMA0IFG (0x0002) /* DMA0IFG */
#define DMAIV_DMA1IFG (0x0004) /* DMA1IFG */
#define DMAIV_DMA2IFG (0x0006) /* DMA2IFG */
/*************************************************************
* Flash Memory
*************************************************************/
#define __MSP430_HAS_FLASH2__ /* Definition to show that Module is available */
#define FCTL1_ 0x0128 /* FLASH Control 1 */
sfrw(FCTL1, FCTL1_);
#define FCTL2_ 0x012A /* FLASH Control 2 */
sfrw(FCTL2, FCTL2_);
#define FCTL3_ 0x012C /* FLASH Control 3 */
sfrw(FCTL3, FCTL3_);
#define FCTL4_ 0x01BE /* FLASH Control 4 */
sfrw(FCTL4, FCTL4_);
#define FRKEY (0x9600) /* Flash key returned by read */
#define FWKEY (0xA500) /* Flash key for write */
#define FXKEY (0x3300) /* for use with XOR instruction */
#define ERASE (0x0002) /* Enable bit for Flash segment erase */
#define MERAS (0x0004) /* Enable bit for Flash mass erase */
#define EEI (0x0008) /* Enable Erase Interrupts */
#define EEIEX (0x0010) /* Enable Emergency Interrupt Exit */
#define WRT (0x0040) /* Enable bit for Flash write */
#define BLKWRT (0x0080) /* Enable bit for Flash segment write */
#define SEGWRT (0x0080) /* old definition */ /* Enable bit for Flash segment write */
#define FN0 (0x0001) /* Divide Flash clock by 1 to 64 using FN0 to FN5 according to: */
#define FN1 (0x0002) /* 32*FN5 + 16*FN4 + 8*FN3 + 4*FN2 + 2*FN1 + FN0 + 1 */
#ifndef FN2
#define FN2 (0x0004)
#endif
#ifndef FN3
#define FN3 (0x0008)
#endif
#ifndef FN4
#define FN4 (0x0010)
#endif
#define FN5 (0x0020)
#define FSSEL0 (0x0040) /* Flash clock select 0 */ /* to distinguish from USART SSELx */
#define FSSEL1 (0x0080) /* Flash clock select 1 */
#define FSSEL_0 (0x0000) /* Flash clock select: 0 - ACLK */
#define FSSEL_1 (0x0040) /* Flash clock select: 1 - MCLK */
#define FSSEL_2 (0x0080) /* Flash clock select: 2 - SMCLK */
#define FSSEL_3 (0x00C0) /* Flash clock select: 3 - SMCLK */
#define BUSY (0x0001) /* Flash busy: 1 */
#define KEYV (0x0002) /* Flash Key violation flag */
#define ACCVIFG (0x0004) /* Flash Access violation flag */
#define WAIT (0x0008) /* Wait flag for segment write */
#define LOCK (0x0010) /* Lock bit: 1 - Flash is locked (read only) */
#define EMEX (0x0020) /* Flash Emergency Exit */
#define LOCKA (0x0040) /* Segment A Lock bit: read = 1 - Segment is locked (read only) */
#define FAIL (0x0080) /* Last Program or Erase failed */
#define MGR0 (0x0010) /* Marginal read 0 mode. */
#define MGR1 (0x0020) /* Marginal read 1 mode. */
/************************************************************
* SYSTEM CLOCK, FLL+
************************************************************/
#define __MSP430_HAS_FLLPLUS__ /* Definition to show that Module is available */
#define SCFI0_ 0x0050 /* System Clock Frequency Integrator 0 */
sfrb(SCFI0, SCFI0_);
#define FN_2 (0x04) /* fDCOCLK = 1.4-12MHz*/
#define FN_3 (0x08) /* fDCOCLK = 2.2-17Mhz*/
#define FN_4 (0x10) /* fDCOCLK = 3.2-25Mhz*/
#define FN_8 (0x20) /* fDCOCLK = 5-40Mhz*/
#define FLLD0 (0x40) /* Loop Divider Bit : 0 */
#define FLLD1 (0x80) /* Loop Divider Bit : 1 */
#define FLLD_1 (0x00) /* Multiply Selected Loop Freq. By 1 */
#define FLLD_2 (0x40) /* Multiply Selected Loop Freq. By 2 */
#define FLLD_4 (0x80) /* Multiply Selected Loop Freq. By 4 */
#define FLLD_8 (0xC0) /* Multiply Selected Loop Freq. By 8 */
#define SCFI1_ 0x0051 /* System Clock Frequency Integrator 1 */
sfrb(SCFI1, SCFI1_);
#define SCFQCTL_ 0x0052 /* System Clock Frequency Control */
sfrb(SCFQCTL, SCFQCTL_);
/* System clock frequency values fMCLK coded with Bits 0-6 in SCFQCTL */
/* #define SCFQ_32K 0x00 fMCLK=1*fACLK only a range from */
#define SCFQ_64K (0x01) /* fMCLK=2*fACLK 1+1 to 127+1 is possible */
#define SCFQ_128K (0x03) /* fMCLK=4*fACLK */
#define SCFQ_256K (0x07) /* fMCLK=8*fACLK */
#define SCFQ_512K (0x0F) /* fMCLK=16*fACLK */
#define SCFQ_1M (0x1F) /* fMCLK=32*fACLK */
#define SCFQ_2M (0x3F) /* fMCLK=64*fACLK */
#define SCFQ_4M (0x7F) /* fMCLK=128*fACLK */
#define SCFQ_M (0x80) /* Modulation Disable */
#define FLL_CTL0_ 0x0053 /* FLL+ Control 0 */
sfrb(FLL_CTL0, FLL_CTL0_);
#define DCOF (0x01) /* DCO Fault Flag */
#define LFOF (0x02) /* Low Frequency Oscillator Fault Flag */
#define XT1OF (0x04) /* High Frequency Oscillator 1 Fault Flag */
#define XT2OF (0x08) /* High Frequency Oscillator 2 Fault Flag */
#define OSCCAP0 (0x10) /* XIN/XOUT Cap 0 */
#define OSCCAP1 (0x20) /* XIN/XOUT Cap 1 */
#define XTS_FLL (0x40) /* 1: Selects high-freq. oscillator */
#define DCOPLUS (0x80) /* DCO+ Enable */
#define XCAP0PF (0x00) /* XIN Cap = XOUT Cap = 0pf */
#define XCAP5_5F (0x10) /* XIN Cap = XOUT Cap = 5.5pf */
#define XCAP8_5PF (0x20) /* XIN Cap = XOUT Cap = 8.5pf */
#define XCAP11PF (0x30) /* XIN Cap = XOUT Cap = 11pf */
#define OSCCAP_0 (0x00) /* XIN Cap = XOUT Cap: 0 */
#define OSCCAP_1 (0x10) /* XIN Cap = XOUT Cap: 1 */
#define OSCCAP_2 (0x20) /* XIN Cap = XOUT Cap: 2 */
#define OSCCAP_3 (0x30) /* XIN Cap = XOUT Cap: 3 */
#define FLL_CTL1_ 0x0054 /* FLL+ Control 1 */
sfrb(FLL_CTL1, FLL_CTL1_);
#define FLL_DIV0 (0x01) /* FLL+ Divide Px.x/ACLK 0 */
#define FLL_DIV1 (0x02) /* FLL+ Divide Px.x/ACLK 1 */
#define SELS (0x04) /* Peripheral Module Clock Source (0: DCO, 1: XT2) */
#define SELM0 (0x08) /* MCLK Source Select 0 */
#define SELM1 (0x10) /* MCLK Source Select 1 */
#define XT2OFF (0x20) /* High Frequency Oscillator 2 (XT2) disable */
#define SMCLKOFF (0x40) /* Peripheral Module Clock (SMCLK) disable */
#define LFXT1DIG (0x80) /* Enable Digital input for LF clock */
#define FLL_DIV_1 (0x00) /* FLL+ Divide Px.x/ACLK By 1 */
#define FLL_DIV_2 (0x01) /* FLL+ Divide Px.x/ACLK By 2 */
#define FLL_DIV_4 (0x02) /* FLL+ Divide Px.x/ACLK By 4 */
#define FLL_DIV_8 (0x03) /* FLL+ Divide Px.x/ACLK By 8 */
#define SELM_DCO (0x00) /* Select DCO for CPU MCLK */
#define SELM_XT2 (0x10) /* Select XT2 for CPU MCLK */
#define SELM_A (0x18) /* Select A (from LFXT1) for CPU MCLK */
#define FLL_CTL2_ 0x0055 /* FLL+ Control 2 */
sfrb(FLL_CTL2, FLL_CTL2_);
#define XT2S0 (0x40) /* Mode 0 for XT2 */
#define XT2S1 (0x80) /* Mode 1 for XT2 */
#define XT2S_0 (0x00) /* Mode 0 for XT2 : 0.4 - 1 MHz */
#define XT2S_1 (0x40) /* Mode 1 for XT2 : 1 - 4 MHz */
#define XT2S_2 (0x80) /* Mode 2 for XT2 : 2 - 16 MHz */
#define XT2S_3 (0xC0) /* Mode 3 for XT2 : Digital input signal */
/* INTERRUPT CONTROL BITS */
/* These two bits are defined in the Special Function Registers */
/* #define OFIFG 0x02 */
/* #define OFIE 0x02 */
/************************************************************
* LCD_A
************************************************************/
#define __MSP430_HAS_LCD_A__ /* Definition to show that Module is available */
#define LCDACTL_ 0x0090 /* LCD_A Control Register */
sfrb(LCDACTL, LCDACTL_);
#define LCDON (0x01)
#define LCDSON (0x04)
#define LCDMX0 (0x08)
#define LCDMX1 (0x10)
#define LCDFREQ0 (0x20)
#define LCDFREQ1 (0x40)
#define LCDFREQ2 (0x80)
/* Display modes coded with Bits 2-4 */
#define LCDSTATIC (LCDSON)
#define LCD2MUX (LCDMX0+LCDSON)
#define LCD3MUX (LCDMX1+LCDSON)
#define LCD4MUX (LCDMX1+LCDMX0+LCDSON)
/* Frequency select code with Bits 5-7 */
#define LCDFREQ_32 (0x00) /* LCD Freq: ACLK divided by 32 */
#define LCDFREQ_64 (0x20) /* LCD Freq: ACLK divided by 64 */
#define LCDFREQ_96 (0x40) /* LCD Freq: ACLK divided by 96 */
#define LCDFREQ_128 (0x60) /* LCD Freq: ACLK divided by 128 */
#define LCDFREQ_192 (0x80) /* LCD Freq: ACLK divided by 192 */
#define LCDFREQ_256 (0xA0) /* LCD Freq: ACLK divided by 256 */
#define LCDFREQ_384 (0xC0) /* LCD Freq: ACLK divided by 384 */
#define LCDFREQ_512 (0xE0) /* LCD Freq: ACLK divided by 512 */
#define LCDAPCTL0_ 0x00AC /* LCD_A Port Control Register 0 */
sfrb(LCDAPCTL0, LCDAPCTL0_);
#define LCDS0 (0x01) /* LCD Segment 0 to 3 Enable. */
#define LCDS4 (0x02) /* LCD Segment 4 to 7 Enable. */
#define LCDS8 (0x04) /* LCD Segment 8 to 11 Enable. */
#define LCDS12 (0x08) /* LCD Segment 12 to 15 Enable. */
#define LCDS16 (0x10) /* LCD Segment 16 to 19 Enable. */
#define LCDS20 (0x20) /* LCD Segment 20 to 23 Enable. */
#define LCDS24 (0x40) /* LCD Segment 24 to 27 Enable. */
#define LCDS28 (0x80) /* LCD Segment 28 to 31 Enable. */
#define LCDAPCTL1_ 0x00AD /* LCD_A Port Control Register 1 */
sfrb(LCDAPCTL1, LCDAPCTL1_);
#define LCDS32 (0x01) /* LCD Segment 32 to 35 Enable. */
#define LCDS36 (0x02) /* LCD Segment 36 to 39 Enable. */
#define LCDAVCTL0_ 0x00AE /* LCD_A Voltage Control Register 0 */
sfrb(LCDAVCTL0, LCDAVCTL0_);
#define LCD2B (0x01) /* Selects 1/2 bias. */
#define VLCDREF0 (0x02) /* Selects reference voltage for regulated charge pump: 0 */
#define VLCDREF1 (0x04) /* Selects reference voltage for regulated charge pump: 1 */
#define LCDCPEN (0x08) /* LCD Voltage Charge Pump Enable. */
#define VLCDEXT (0x10) /* Select external source for VLCD. */
#define LCDREXT (0x20) /* Selects external connections for LCD mid voltages. */
#define LCDR03EXT (0x40) /* Selects external connection for lowest LCD voltage. */
/* Reference voltage source select for the regulated charge pump */
#define VLCDREF_0 (0<<1) /* Internal */
#define VLCDREF_1 (1<<1) /* External */
#define VLCDREF_2 (2<<1) /* Reserved */
#define VLCDREF_3 (3<<1) /* Reserved */
#define LCDAVCTL1_ 0x00AF /* LCD_A Voltage Control Register 1 */
sfrb(LCDAVCTL1, LCDAVCTL1_);
#define VLCD0 (0x02) /* VLCD select: 0 */
#define VLCD1 (0x04) /* VLCD select: 1 */
#define VLCD2 (0x08) /* VLCD select: 2 */
#define VLCD3 (0x10) /* VLCD select: 3 */
/* Charge pump voltage selections */
#define VLCD_0 (0<<1) /* Charge pump disabled */
#define VLCD_1 (1<<1) /* VLCD = 2.60V */
#define VLCD_2 (2<<1) /* VLCD = 2.66V */
#define VLCD_3 (3<<1) /* VLCD = 2.72V */
#define VLCD_4 (4<<1) /* VLCD = 2.78V */
#define VLCD_5 (5<<1) /* VLCD = 2.84V */
#define VLCD_6 (6<<1) /* VLCD = 2.90V */
#define VLCD_7 (7<<1) /* VLCD = 2.96V */
#define VLCD_8 (8<<1) /* VLCD = 3.02V */
#define VLCD_9 (9<<1) /* VLCD = 3.08V */
#define VLCD_10 (10<<1) /* VLCD = 3.14V */
#define VLCD_11 (11<<1) /* VLCD = 3.20V */
#define VLCD_12 (12<<1) /* VLCD = 3.26V */
#define VLCD_13 (12<<1) /* VLCD = 3.32V */
#define VLCD_14 (13<<1) /* VLCD = 3.38V */
#define VLCD_15 (15<<1) /* VLCD = 3.44V */
#define VLCD_DISABLED (0<<1) /* Charge pump disabled */
#define VLCD_2_60 (1<<1) /* VLCD = 2.60V */
#define VLCD_2_66 (2<<1) /* VLCD = 2.66V */
#define VLCD_2_72 (3<<1) /* VLCD = 2.72V */
#define VLCD_2_78 (4<<1) /* VLCD = 2.78V */
#define VLCD_2_84 (5<<1) /* VLCD = 2.84V */
#define VLCD_2_90 (6<<1) /* VLCD = 2.90V */
#define VLCD_2_96 (7<<1) /* VLCD = 2.96V */
#define VLCD_3_02 (8<<1) /* VLCD = 3.02V */
#define VLCD_3_08 (9<<1) /* VLCD = 3.08V */
#define VLCD_3_14 (10<<1) /* VLCD = 3.14V */
#define VLCD_3_20 (11<<1) /* VLCD = 3.20V */
#define VLCD_3_26 (12<<1) /* VLCD = 3.26V */
#define VLCD_3_32 (12<<1) /* VLCD = 3.32V */
#define VLCD_3_38 (13<<1) /* VLCD = 3.38V */
#define VLCD_3_44 (15<<1) /* VLCD = 3.44V */
#define LCDMEM_ (0x0091) /* LCD Memory */
#ifndef __STDC__
#define LCDMEM (LCDMEM_) /* LCD Memory (for assembler) */
#else
#define LCDMEM ((volatile char*) LCDMEM_) /* LCD Memory (for C) */
#endif
#define LCDM1_ 0x0091 /* LCD Memory 1 */
sfrb(LCDM1, LCDM1_);
#define LCDM2_ 0x0092 /* LCD Memory 2 */
sfrb(LCDM2, LCDM2_);
#define LCDM3_ 0x0093 /* LCD Memory 3 */
sfrb(LCDM3, LCDM3_);
#define LCDM4_ 0x0094 /* LCD Memory 4 */
sfrb(LCDM4, LCDM4_);
#define LCDM5_ 0x0095 /* LCD Memory 5 */
sfrb(LCDM5, LCDM5_);
#define LCDM6_ 0x0096 /* LCD Memory 6 */
sfrb(LCDM6, LCDM6_);
#define LCDM7_ 0x0097 /* LCD Memory 7 */
sfrb(LCDM7, LCDM7_);
#define LCDM8_ 0x0098 /* LCD Memory 8 */
sfrb(LCDM8, LCDM8_);
#define LCDM9_ 0x0099 /* LCD Memory 9 */
sfrb(LCDM9, LCDM9_);
#define LCDM10_ 0x009A /* LCD Memory 10 */
sfrb(LCDM10, LCDM10_);
#define LCDM11_ 0x009B /* LCD Memory 11 */
sfrb(LCDM11, LCDM11_);
#define LCDM12_ 0x009C /* LCD Memory 12 */
sfrb(LCDM12, LCDM12_);
#define LCDM13_ 0x009D /* LCD Memory 13 */
sfrb(LCDM13, LCDM13_);
#define LCDM14_ 0x009E /* LCD Memory 14 */
sfrb(LCDM14, LCDM14_);
#define LCDM15_ 0x009F /* LCD Memory 15 */
sfrb(LCDM15, LCDM15_);
#define LCDM16_ 0x00A0 /* LCD Memory 16 */
sfrb(LCDM16, LCDM16_);
#define LCDM17_ 0x00A1 /* LCD Memory 17 */
sfrb(LCDM17, LCDM17_);
#define LCDM18_ 0x00A2 /* LCD Memory 18 */
sfrb(LCDM18, LCDM18_);
#define LCDM19_ 0x00A3 /* LCD Memory 19 */
sfrb(LCDM19, LCDM19_);
#define LCDM20_ 0x00A4 /* LCD Memory 20 */
sfrb(LCDM20, LCDM20_);
#define LCDMA (LCDM10) /* LCD Memory A */
#define LCDMB (LCDM11) /* LCD Memory B */
#define LCDMC (LCDM12) /* LCD Memory C */
#define LCDMD (LCDM13) /* LCD Memory D */
#define LCDME (LCDM14) /* LCD Memory E */
#define LCDMF (LCDM15) /* LCD Memory F */
/************************************************************
* HARDWARE MULTIPLIER 32Bit
************************************************************/
#define __MSP430_HAS_MPY32__ /* Definition to show that Module is available */
#define MPY_B_ 0x0130 /* Multiply Unsigned/Operand 1 (Byte Access) */
sfrb(MPY_B, MPY_B_);
#define MPYS_B_ 0x0132 /* Multiply Signed/Operand 1 (Byte Access) */
sfrb(MPYS_B, MPYS_B_);
#define MAC_B_ 0x0134 /* Multiply Unsigned and Accumulate/Operand 1 (Byte Access) */
sfrb(MAC_B, MAC_B_);
#define MACS_B_ 0x0136 /* Multiply Signed and Accumulate/Operand 1 (Byte Access) */
sfrb(MACS_B, MACS_B_);
#define OP2_B_ 0x0138 /* Operand 2 (Byte Access) */
sfrb(OP2_B, OP2_B_);
#define MPY_ 0x0130 /* Multiply Unsigned/Operand 1 */
sfrw(MPY, MPY_);
#define MPYS_ 0x0132 /* Multiply Signed/Operand 1 */
sfrw(MPYS, MPYS_);
#define MAC_ 0x0134 /* Multiply Unsigned and Accumulate/Operand 1 */
sfrw(MAC, MAC_);
#define MACS_ 0x0136 /* Multiply Signed and Accumulate/Operand 1 */
sfrw(MACS, MACS_);
#define OP2_ 0x0138 /* Operand 2 */
sfrw(OP2, OP2_);
#define RESLO_ 0x013A /* Result Low Word */
sfrw(RESLO, RESLO_);
#define RESHI_ 0x013C /* Result High Word */
sfrw(RESHI, RESHI_);
#define SUMEXT_ 0x013E /* Sum Extend */
const_sfrw(SUMEXT, SUMEXT_);
#define MPY32L_B_ 0x0140 /* 32-bit operand 1 - multiply - low word (Byte Access) */
sfrb(MPY32L_B, MPY32L_B_);
#define MPY32H_B_ 0x0142 /* 32-bit operand 1 - multiply - high word (Byte Access) */
sfrb(MPY32H_B, MPY32H_B_);
#define MPYS32L_B_ 0x0144 /* 32-bit operand 1 - signed multiply - low word (Byte Access) */
sfrb(MPYS32L_B, MPYS32L_B_);
#define MPYS32H_B_ 0x0146 /* 32-bit operand 1 - signed multiply - high word (Byte Access) */
sfrb(MPYS32H_B, MPYS32H_B_);
#define MAC32L_B_ 0x0148 /* 32-bit operand 1 - multiply accumulate - low word (Byte Access) */
sfrb(MAC32L_B, MAC32L_B_);
#define MAC32H_B_ 0x014A /* 32-bit operand 1 - multiply accumulate - high word (Byte Access) */
sfrb(MAC32H_B, MAC32H_B_);
#define MACS32L_B_ 0x014C /* 32-bit operand 1 - signed multiply accumulate - low word (Byte Access) */
sfrb(MACS32L_B, MACS32L_B_);
#define MACS32H_B_ 0x014E /* 32-bit operand 1 - signed multiply accumulate - high word (Byte Access) */
sfrb(MACS32H_B, MACS32H_B_);
#define OP2L_B_ 0x0150 /* 32-bit operand 2 - low word (Byte Access) */
sfrb(OP2L_B, OP2L_B_);
#define OP2H_B_ 0x0152 /* 32-bit operand 2 - high word (Byte Access) */
sfrb(OP2H_B, OP2H_B_);
#define MPY32L_ 0x0140 /* 32-bit operand 1 - multiply - low word */
sfrw(MPY32L, MPY32L_);
#define MPY32H_ 0x0142 /* 32-bit operand 1 - multiply - high word */
sfrw(MPY32H, MPY32H_);
#define MPYS32L_ 0x0144 /* 32-bit operand 1 - signed multiply - low word */
sfrw(MPYS32L, MPYS32L_);
#define MPYS32H_ 0x0146 /* 32-bit operand 1 - signed multiply - high word */
sfrw(MPYS32H, MPYS32H_);
#define MAC32L_ 0x0148 /* 32-bit operand 1 - multiply accumulate - low word */
sfrw(MAC32L, MAC32L_);
#define MAC32H_ 0x014A /* 32-bit operand 1 - multiply accumulate - high word */
sfrw(MAC32H, MAC32H_);
#define MACS32L_ 0x014C /* 32-bit operand 1 - signed multiply accumulate - low word */
sfrw(MACS32L, MACS32L_);
#define MACS32H_ 0x014E /* 32-bit operand 1 - signed multiply accumulate - high word */
sfrw(MACS32H, MACS32H_);
#define OP2L_ 0x0150 /* 32-bit operand 2 - low word */
sfrw(OP2L, OP2L_);
#define OP2H_ 0x0152 /* 32-bit operand 2 - high word */
sfrw(OP2H, OP2H_);
#define RES0_ 0x0154 /* 32x32-bit result 0 - least significant word */
sfrw(RES0, RES0_);
#define RES1_ 0x0156 /* 32x32-bit result 1 */
sfrw(RES1, RES1_);
#define RES2_ 0x0158 /* 32x32-bit result 2 */
sfrw(RES2, RES2_);
#define RES3_ 0x015A /* 32x32-bit result 3 - most significant word */
sfrw(RES3, RES3_);
#define MPY32CTL0_ 0x015C /* MPY32 Control Register 0 */
sfrw(MPY32CTL0, MPY32CTL0_);
#define MPYC (0x0001) /* Carry of the multiplier */
//#define RESERVED (0x0002) /* Reserved */
#define MPYFRAC (0x0004) /* Fractional mode */
#define MPYSAT (0x0008) /* Saturation mode */
#define MPYM0 (0x0010) /* Multiplier mode Bit:0 */
#define MPYM1 (0x0020) /* Multiplier mode Bit:1 */
#define OP1_32 (0x0040) /* Bit-width of operand 1 0:16Bit / 1:32Bit */
#define OP2_32 (0x0080) /* Bit-width of operand 2 0:16Bit / 1:32Bit */
#define MPYDLYWRTEN (0x0100) /* Delayed write enable */
#define MPYDLY32 (0x0200) /* Delayed write mode */
#define MPYM_0 (0x0000) /* Multiplier mode: MPY */
#define MPYM_1 (0x0010) /* Multiplier mode: MPYS */
#define MPYM_2 (0x0020) /* Multiplier mode: MAC */
#define MPYM_3 (0x0030) /* Multiplier mode: MACS */
#define MPYM__MPY (0x0000) /* Multiplier mode: MPY */
#define MPYM__MPYS (0x0010) /* Multiplier mode: MPYS */
#define MPYM__MAC (0x0020) /* Multiplier mode: MAC */
#define MPYM__MACS (0x0030) /* Multiplier mode: MACS */
/************************************************************
* DIGITAL I/O Port1/2 Pull up / Pull down Resistors
************************************************************/
#define __MSP430_HAS_PORT1_R__ /* Definition to show that Module is available */
#define __MSP430_HAS_PORT2_R__ /* Definition to show that Module is available */
#define P1IN_ 0x0020 /* Port 1 Input */
const_sfrb(P1IN, P1IN_);
#define P1OUT_ 0x0021 /* Port 1 Output */
sfrb(P1OUT, P1OUT_);
#define P1DIR_ 0x0022 /* Port 1 Direction */
sfrb(P1DIR, P1DIR_);
#define P1IFG_ 0x0023 /* Port 1 Interrupt Flag */
sfrb(P1IFG, P1IFG_);
#define P1IES_ 0x0024 /* Port 1 Interrupt Edge Select */
sfrb(P1IES, P1IES_);
#define P1IE_ 0x0025 /* Port 1 Interrupt Enable */
sfrb(P1IE, P1IE_);
#define P1SEL_ 0x0026 /* Port 1 Selection */
sfrb(P1SEL, P1SEL_);
#define P1REN_ 0x0027 /* Port 1 Resistor Enable */
sfrb(P1REN, P1REN_);
#define P2IN_ 0x0028 /* Port 2 Input */
const_sfrb(P2IN, P2IN_);
#define P2OUT_ 0x0029 /* Port 2 Output */
sfrb(P2OUT, P2OUT_);
#define P2DIR_ 0x002A /* Port 2 Direction */
sfrb(P2DIR, P2DIR_);
#define P2IFG_ 0x002B /* Port 2 Interrupt Flag */
sfrb(P2IFG, P2IFG_);
#define P2IES_ 0x002C /* Port 2 Interrupt Edge Select */
sfrb(P2IES, P2IES_);
#define P2IE_ 0x002D /* Port 2 Interrupt Enable */
sfrb(P2IE, P2IE_);
#define P2SEL_ 0x002E /* Port 2 Selection */
sfrb(P2SEL, P2SEL_);
#define P2REN_ 0x002F /* Port 2 Resistor Enable */
sfrb(P2REN, P2REN_);
/************************************************************
* DIGITAL I/O Port3/4 Pull up / Pull down Resistors
************************************************************/
#define __MSP430_HAS_PORT3_R__ /* Definition to show that Module is available */
#define __MSP430_HAS_PORT4_R__ /* Definition to show that Module is available */
#define P3IN_ 0x0018 /* Port 3 Input */
const_sfrb(P3IN, P3IN_);
#define P3OUT_ 0x0019 /* Port 3 Output */
sfrb(P3OUT, P3OUT_);
#define P3DIR_ 0x001A /* Port 3 Direction */
sfrb(P3DIR, P3DIR_);
#define P3SEL_ 0x001B /* Port 3 Selection */
sfrb(P3SEL, P3SEL_);
#define P3REN_ 0x0010 /* Port 3 Resistor Enable */
sfrb(P3REN, P3REN_);
#define P4IN_ 0x001C /* Port 4 Input */
const_sfrb(P4IN, P4IN_);
#define P4OUT_ 0x001D /* Port 4 Output */
sfrb(P4OUT, P4OUT_);
#define P4DIR_ 0x001E /* Port 4 Direction */
sfrb(P4DIR, P4DIR_);
#define P4SEL_ 0x001F /* Port 4 Selection */
sfrb(P4SEL, P4SEL_);
#define P4REN_ 0x0011 /* Port 4 Resistor Enable */
sfrb(P4REN, P4REN_);
/************************************************************
* DIGITAL I/O Port5 Pull up / Pull down Resistors
************************************************************/
#define __MSP430_HAS_PORT5_R__ /* Definition to show that Module is available */
#define P5IN_ 0x0030 /* Port 5 Input */
const_sfrb(P5IN, P5IN_);
#define P5OUT_ 0x0031 /* Port 5 Output */
sfrb(P5OUT, P5OUT_);
#define P5DIR_ 0x0032 /* Port 5 Direction */
sfrb(P5DIR, P5DIR_);
#define P5SEL_ 0x0033 /* Port 5 Selection */
sfrb(P5SEL, P5SEL_);
#define P5REN_ 0x0012 /* Port 5 Resistor Enable */
sfrb(P5REN, P5REN_);
/************************************************************
* DIGITAL I/O Port7/8 Pull up / Pull down Resistors
************************************************************/
#define __MSP430_HAS_PORT7_R__ /* Definition to show that Module is available */
#define __MSP430_HAS_PORT8_R__ /* Definition to show that Module is available */
#define __MSP430_HAS_PORTA_R__ /* Definition to show that Module is available */
#define P7IN_ 0x0038 /* Port 7 Input */
const_sfrb(P7IN, P7IN_);
#define P7OUT_ 0x003A /* Port 7 Output */
sfrb(P7OUT, P7OUT_);
#define P7DIR_ 0x003C /* Port 7 Direction */
sfrb(P7DIR, P7DIR_);
#define P7SEL_ 0x003E /* Port 7 Selection */
sfrb(P7SEL, P7SEL_);
#define P7REN_ 0x0014 /* Port 7 Resistor Enable */
sfrb(P7REN, P7REN_);
#define P8IN_ 0x0039 /* Port 8 Input */
const_sfrb(P8IN, P8IN_);
#define P8OUT_ 0x003B /* Port 8 Output */
sfrb(P8OUT, P8OUT_);
#define P8DIR_ 0x003D /* Port 8 Direction */
sfrb(P8DIR, P8DIR_);
#define P8SEL_ 0x003F /* Port 8 Selection */
sfrb(P8SEL, P8SEL_);
#define P8REN_ 0x0015 /* Port 8 Resistor Enable */
sfrb(P8REN, P8REN_);
#define PAIN_ 0x0038 /* Port A Input */
const_sfrw(PAIN, PAIN_);
#define PAOUT_ 0x003A /* Port A Output */
sfrw(PAOUT, PAOUT_);
#define PADIR_ 0x003C /* Port A Direction */
sfrw(PADIR, PADIR_);
#define PASEL_ 0x003E /* Port A Selection */
sfrw(PASEL, PASEL_);
#define PAREN_ 0x0014 /* Port A Resistor Enable */
sfrw(PAREN, PAREN_);
/************************************************************
* DIGITAL I/O Port9/10 Pull up / Pull down Resistors
************************************************************/
#define __MSP430_HAS_PORT9_R__ /* Definition to show that Module is available */
#define __MSP430_HAS_PORT10_R__ /* Definition to show that Module is available */
#define __MSP430_HAS_PORTB_R__ /* Definition to show that Module is available */
#define P9IN_ 0x0008 /* Port 9 Input */
const_sfrb(P9IN, P9IN_);
#define P9OUT_ 0x000A /* Port 9 Output */
sfrb(P9OUT, P9OUT_);
#define P9DIR_ 0x000C /* Port 9 Direction */
sfrb(P9DIR, P9DIR_);
#define P9SEL_ 0x000E /* Port 9 Selection */
sfrb(P9SEL, P9SEL_);
#define P9REN_ 0x0016 /* Port 9 Resistor Enable */
sfrb(P9REN, P9REN_);
#define P10IN_ 0x0009 /* Port 10 Input */
const_sfrb(P10IN, P10IN_);
#define P10OUT_ 0x000B /* Port 10 Output */
sfrb(P10OUT, P10OUT_);
#define P10DIR_ 0x000D /* Port 10 Direction */
sfrb(P10DIR, P10DIR_);
#define P10SEL_ 0x000F /* Port 10 Selection */
sfrb(P10SEL, P10SEL_);
#define P10REN_ 0x0017 /* Port 10 Resistor Enable */
sfrb(P10REN, P10REN_);
#define PBIN_ 0x0008 /* Port B Input */
const_sfrw(PBIN, PBIN_);
#define PBOUT_ 0x000A /* Port B Output */
sfrw(PBOUT, PBOUT_);
#define PBDIR_ 0x000C /* Port B Direction */
sfrw(PBDIR, PBDIR_);
#define PBSEL_ 0x000E /* Port B Selection */
sfrw(PBSEL, PBSEL_);
#define PBREN_ 0x0016 /* Port B Resistor Enable */
sfrw(PBREN, PBREN_);
/************************************************************
* Brown-Out, Supply Voltage Supervision (SVS)
************************************************************/
#define __MSP430_HAS_SVS__ /* Definition to show that Module is available */
#define SVSCTL_ 0x0056 /* SVS Control */
sfrb(SVSCTL, SVSCTL_);
#define SVSFG (0x01) /* SVS Flag */
#define SVSOP (0x02) /* SVS output (read only) */
#define SVSON (0x04) /* Switches the SVS on/off */
#define PORON (0x08) /* Enable POR Generation if Low Voltage */
#define VLD0 (0x10)
#define VLD1 (0x20)
#define VLD2 (0x40)
#define VLD3 (0x80)
#define VLDON (0x10)
#define VLDOFF (0x00)
#define VLD_1_8V (0x10)
/************************************************************
* SD16_A3 - Sigma Delta 16 Bit
************************************************************/
#define __MSP430_HAS_SD16_A3__ /* Definition to show that Module is available */
#define SD16INCTL0_ 0x00B0 /* SD16 Input Control Register Channel 0 */
sfrb(SD16INCTL0, SD16INCTL0_);
#define SD16INCTL1_ 0x00B1 /* SD16 Input Control Register Channel 1 */
sfrb(SD16INCTL1, SD16INCTL1_);
#define SD16INCTL2_ 0x00B2 /* SD16 Input Control Register Channel 2 */
sfrb(SD16INCTL2, SD16INCTL2_);
#define SD16PRE0_ 0x00B8 /* SD16 Preload Register Channel 0 */
sfrb(SD16PRE0, SD16PRE0_);
#define SD16PRE1_ 0x00B9 /* SD16 Preload Register Channel 1 */
sfrb(SD16PRE1, SD16PRE1_);
#define SD16PRE2_ 0x00BA /* SD16 Preload Register Channel 2 */
sfrb(SD16PRE2, SD16PRE2_);
//sfrb SD16CONF0 (0x00B7) /* SD16 Internal Configuration Register 0 */
#define SD16CONF1_ 0x00BF /* SD16 Internal Configuration Register 1 */
sfrb(SD16CONF1, SD16CONF1_);
/* Please use only the recommended settings */
#define SD16CTL_ 0x0100 /* Sigma Delta ADC 16 Control Register */
sfrw(SD16CTL, SD16CTL_);
#define SD16CCTL0_ 0x0102 /* SD16 Channel 0 Control Register */
sfrw(SD16CCTL0, SD16CCTL0_);
#define SD16CCTL1_ 0x0104 /* SD16 Channel 1 Control Register */
sfrw(SD16CCTL1, SD16CCTL1_);
#define SD16CCTL2_ 0x0106 /* SD16 Channel 2 Control Register */
sfrw(SD16CCTL2, SD16CCTL2_);
#define SD16IV_ 0x01AE /* SD16 Interrupt Vector Register */
sfrw(SD16IV, SD16IV_);
#define SD16MEM0_ 0x0110 /* SD16 Channel 0 Conversion Memory */
sfrw(SD16MEM0, SD16MEM0_);
#define SD16MEM1_ 0x0112 /* SD16 Channel 1 Conversion Memory */
sfrw(SD16MEM1, SD16MEM1_);
#define SD16MEM2_ 0x0114 /* SD16 Channel 2 Conversion Memory */
sfrw(SD16MEM2, SD16MEM2_);
/* SD16INCTLx */
#define SD16INCH0 (0x0001) /* SD16 Input Channel select 0 */
#define SD16INCH1 (0x0002) /* SD16 Input Channel select 1 */
#define SD16INCH2 (0x0004) /* SD16 Input Channel select 2 */
#define SD16GAIN0 (0x0008) /* SD16 Input Pre-Amplifier Gain Select 0 */
#define SD16GAIN1 (0x0010) /* SD16 Input Pre-Amplifier Gain Select 1 */
#define SD16GAIN2 (0x0020) /* SD16 Input Pre-Amplifier Gain Select 2 */
#define SD16INTDLY0 (0x0040) /* SD16 Interrupt Delay after 1.Conversion 0 */
#define SD16INTDLY1 (0x0080) /* SD16 Interrupt Delay after 1.Conversion 1 */
#define SD16GAIN_1 (0x0000) /* SD16 Input Pre-Amplifier Gain Select *1 */
#define SD16GAIN_2 (0x0008) /* SD16 Input Pre-Amplifier Gain Select *2 */
#define SD16GAIN_4 (0x0010) /* SD16 Input Pre-Amplifier Gain Select *4 */
#define SD16GAIN_8 (0x0018) /* SD16 Input Pre-Amplifier Gain Select *8 */
#define SD16GAIN_16 (0x0020) /* SD16 Input Pre-Amplifier Gain Select *16 */
#define SD16GAIN_32 (0x0028) /* SD16 Input Pre-Amplifier Gain Select *32 */
#define SD16INCH_0 (0x0000) /* SD16 Input Channel select input */
#define SD16INCH_1 (0x0001) /* SD16 Input Channel select input */
#define SD16INCH_2 (0x0002) /* SD16 Input Channel select input */
#define SD16INCH_3 (0x0003) /* SD16 Input Channel select input */
#define SD16INCH_4 (0x0004) /* SD16 Input Channel select input */
#define SD16INCH_5 (0x0005) /* SD16 Input Channel select Vcc divider */
#define SD16INCH_6 (0x0006) /* SD16 Input Channel select Temp */
#define SD16INCH_7 (0x0007) /* SD16 Input Channel select Offset */
#define SD16INTDLY_0 (0x0000) /* SD16 Interrupt Delay: Int. after 4.Conversion */
#define SD16INTDLY_1 (0x0040) /* SD16 Interrupt Delay: Int. after 3.Conversion */
#define SD16INTDLY_2 (0x0080) /* SD16 Interrupt Delay: Int. after 2.Conversion */
#define SD16INTDLY_3 (0x00C0) /* SD16 Interrupt Delay: Int. after 1.Conversion */
/* SD16CTL */
#define SD16OVIE (0x0002) /* SD16 Overflow Interupt Enable */
#define SD16REFON (0x0004) /* SD16 Switch internal Reference on */
#define SD16VMIDON (0x0008) /* SD16 Switch Vmid Buffer on */
#define SD16SSEL0 (0x0010) /* SD16 Clock Source Select 0 */
#define SD16SSEL1 (0x0020) /* SD16 Clock Source Select 1 */
#define SD16DIV0 (0x0040) /* SD16 Clock Divider Select 0 */
#define SD16DIV1 (0x0080) /* SD16 Clock Divider Select 1 */
#define SD16LP (0x0100) /* SD16 Low Power Mode Enable */
#define SD16XDIV0 (0x0200) /* SD16 2.Clock Divider Select 0 */
#define SD16XDIV1 (0x0400) /* SD16 2.Clock Divider Select 1 */
//#define SD16XDIV2 (0x0800) /* SD16 2.Clock Divider Select 2 */
#define SD16DIV_0 (0x0000) /* SD16 Clock Divider Select /1 */
#define SD16DIV_1 (SD16DIV0) /* SD16 Clock Divider Select /2 */
#define SD16DIV_2 (SD16DIV1) /* SD16 Clock Divider Select /4 */
#define SD16DIV_3 (SD16DIV0+SD16DIV1) /* SD16 Clock Divider Select /8 */
#define SD16XDIV_0 (0x0000) /* SD16 2.Clock Divider Select /1 */
#define SD16XDIV_1 (SD16XDIV0) /* SD16 2.Clock Divider Select /3 */
#define SD16XDIV_2 (SD16XDIV1) /* SD16 2.Clock Divider Select /16 */
#define SD16XDIV_3 (SD16XDIV0+SD16XDIV1) /* SD16 2.Clock Divider Select /48 */
#define SD16SSEL_0 (0x0000) /* SD16 Clock Source Select MCLK */
#define SD16SSEL_1 (SD16SSEL0) /* SD16 Clock Source Select SMCLK */
#define SD16SSEL_2 (SD16SSEL1) /* SD16 Clock Source Select ACLK */
#define SD16SSEL_3 (SD16SSEL0+SD16SSEL1) /* SD16 Clock Source Select TACLK */
/* SD16CCTLx */
#define SD16GRP (0x0001) /* SD16 Grouping of Channels: 0:Off/1:On */
#define SD16SC (0x0002) /* SD16 Start Conversion */
#define SD16IFG (0x0004) /* SD16 Channel x Interrupt Flag */
#define SD16IE (0x0008) /* SD16 Channel x Interrupt Enable */
#define SD16DF (0x0010) /* SD16 Channel x Data Format: 0:Unipolar/1:Bipolar */
#define SD16OVIFG (0x0020) /* SD16 Channel x Overflow Interrupt Flag */
#define SD16LSBACC (0x0040) /* SD16 Channel x Access LSB of ADC */
#define SD16LSBTOG (0x0080) /* SD16 Channel x Toggle LSB Output of ADC */
#define SD16OSR0 (0x0100) /* SD16 Channel x OverSampling Ratio 0 */
#define SD16OSR1 (0x0200) /* SD16 Channel x OverSampling Ratio 1 */
#define SD16SNGL (0x0400) /* SD16 Channel x Single Conversion On/Off */
#define SD16XOSR (0x0800) /* SD16 Channel x Extended OverSampling Ratio */
#define SD16UNI (0x1000) /* SD16 Channel x Bipolar(0) / Unipolar(1) Mode */
#define SD16OSR_1024 (SD16OSR0+SD16XOSR) /* SD16 Channel x OverSampling Ratio 1024 */
#define SD16OSR_512 (SD16XOSR) /* SD16 Channel x OverSampling Ratio 512 */
#define SD16OSR_256 (0x0000) /* SD16 Channel x OverSampling Ratio 256 */
#define SD16OSR_128 (0x0100) /* SD16 Channel x OverSampling Ratio 128 */
#define SD16OSR_64 (0x0200) /* SD16 Channel x OverSampling Ratio 64 */
#define SD16OSR_32 (0x0300) /* SD16 Channel x OverSampling Ratio 32 */
/* SD16IV Definitions */
#define SD16IV_NONE (0x0000) /* No Interrupt pending */
#define SD16IV_SD16OVIFG (0x0002) /* SD16OVIFG */
#define SD16IV_SD16MEM0 (0x0004) /* SD16MEM0 SD16IFG */
#define SD16IV_SD16MEM1 (0x0006) /* SD16MEM1 SD16IFG */
#define SD16IV_SD16MEM2 (0x0008) /* SD16MEM2 SD16IFG */
/************************************************************
* Timer A3
************************************************************/
#define __MSP430_HAS_TA3__ /* Definition to show that Module is available */
#define TAIV_ 0x012E /* Timer A Interrupt Vector Word */
const_sfrw(TAIV, TAIV_);
#define TACTL_ 0x0160 /* Timer A Control */
sfrw(TACTL, TACTL_);
#define TACCTL0_ 0x0162 /* Timer A Capture/Compare Control 0 */
sfrw(TACCTL0, TACCTL0_);
#define TACCTL1_ 0x0164 /* Timer A Capture/Compare Control 1 */
sfrw(TACCTL1, TACCTL1_);
#define TACCTL2_ 0x0166 /* Timer A Capture/Compare Control 2 */
sfrw(TACCTL2, TACCTL2_);
#define TAR_ 0x0170 /* Timer A Counter Register */
sfrw(TAR, TAR_);
#define TACCR0_ 0x0172 /* Timer A Capture/Compare 0 */
sfrw(TACCR0, TACCR0_);
#define TACCR1_ 0x0174 /* Timer A Capture/Compare 1 */
sfrw(TACCR1, TACCR1_);
#define TACCR2_ 0x0176 /* Timer A Capture/Compare 2 */
sfrw(TACCR2, TACCR2_);
/* Alternate register names */
#define CCTL0 TACCTL0 /* Timer A Capture/Compare Control 0 */
#define CCTL1 TACCTL1 /* Timer A Capture/Compare Control 1 */
#define CCTL2 TACCTL2 /* Timer A Capture/Compare Control 2 */
#define CCR0 TACCR0 /* Timer A Capture/Compare 0 */
#define CCR1 TACCR1 /* Timer A Capture/Compare 1 */
#define CCR2 TACCR2 /* Timer A Capture/Compare 2 */
#define CCTL0_ TACCTL0_ /* Timer A Capture/Compare Control 0 */
#define CCTL1_ TACCTL1_ /* Timer A Capture/Compare Control 1 */
#define CCTL2_ TACCTL2_ /* Timer A Capture/Compare Control 2 */
#define CCR0_ TACCR0_ /* Timer A Capture/Compare 0 */
#define CCR1_ TACCR1_ /* Timer A Capture/Compare 1 */
#define CCR2_ TACCR2_ /* Timer A Capture/Compare 2 */
/* Alternate register names - 5xx style */
#define TA0IV TAIV /* Timer A Interrupt Vector Word */
#define TA0CTL TACTL /* Timer A Control */
#define TA0CCTL0 TACCTL0 /* Timer A Capture/Compare Control 0 */
#define TA0CCTL1 TACCTL1 /* Timer A Capture/Compare Control 1 */
#define TA0CCTL2 TACCTL2 /* Timer A Capture/Compare Control 2 */
#define TA0R TAR /* Timer A Counter Register */
#define TA0CCR0 TACCR0 /* Timer A Capture/Compare 0 */
#define TA0CCR1 TACCR1 /* Timer A Capture/Compare 1 */
#define TA0CCR2 TACCR2 /* Timer A Capture/Compare 2 */
#define TA0IV_ TAIV_ /* Timer A Interrupt Vector Word */
#define TA0CTL_ TACTL_ /* Timer A Control */
#define TA0CCTL0_ TACCTL0_ /* Timer A Capture/Compare Control 0 */
#define TA0CCTL1_ TACCTL1_ /* Timer A Capture/Compare Control 1 */
#define TA0CCTL2_ TACCTL2_ /* Timer A Capture/Compare Control 2 */
#define TA0R_ TAR_ /* Timer A Counter Register */
#define TA0CCR0_ TACCR0_ /* Timer A Capture/Compare 0 */
#define TA0CCR1_ TACCR1_ /* Timer A Capture/Compare 1 */
#define TA0CCR2_ TACCR2_ /* Timer A Capture/Compare 2 */
#define TIMER0_A1_VECTOR TIMERA1_VECTOR /* Int. Vector: Timer A CC1-2, TA */
#define TIMER0_A0_VECTOR TIMERA0_VECTOR /* Int. Vector: Timer A CC0 */
#define TASSEL1 (0x0200) /* Timer A clock source select 1 */
#define TASSEL0 (0x0100) /* Timer A clock source select 0 */
#define ID1 (0x0080) /* Timer A clock input divider 1 */
#define ID0 (0x0040) /* Timer A clock input divider 0 */
#define MC1 (0x0020) /* Timer A mode control 1 */
#define MC0 (0x0010) /* Timer A mode control 0 */
#define TACLR (0x0004) /* Timer A counter clear */
#define TAIE (0x0002) /* Timer A counter interrupt enable */
#define TAIFG (0x0001) /* Timer A counter interrupt flag */
#define MC_0 (0x0000) /* Timer A mode control: 0 - Stop */
#define MC_1 (0x0010) /* Timer A mode control: 1 - Up to CCR0 */
#define MC_2 (0x0020) /* Timer A mode control: 2 - Continous up */
#define MC_3 (0x0030) /* Timer A mode control: 3 - Up/Down */
#define ID_0 (0x0000) /* Timer A input divider: 0 - /1 */
#define ID_1 (0x0040) /* Timer A input divider: 1 - /2 */
#define ID_2 (0x0080) /* Timer A input divider: 2 - /4 */
#define ID_3 (0x00C0) /* Timer A input divider: 3 - /8 */
#define TASSEL_0 (0x0000) /* Timer A clock source select: 0 - TACLK */
#define TASSEL_1 (0x0100) /* Timer A clock source select: 1 - ACLK */
#define TASSEL_2 (0x0200) /* Timer A clock source select: 2 - SMCLK */
#define TASSEL_3 (0x0300) /* Timer A clock source select: 3 - INCLK */
#define CM1 (0x8000) /* Capture mode 1 */
#define CM0 (0x4000) /* Capture mode 0 */
#define CCIS1 (0x2000) /* Capture input select 1 */
#define CCIS0 (0x1000) /* Capture input select 0 */
#define SCS (0x0800) /* Capture sychronize */
#define SCCI (0x0400) /* Latched capture signal (read) */
#define CAP (0x0100) /* Capture mode: 1 /Compare mode : 0 */
#define OUTMOD2 (0x0080) /* Output mode 2 */
#define OUTMOD1 (0x0040) /* Output mode 1 */
#define OUTMOD0 (0x0020) /* Output mode 0 */
#define CCIE (0x0010) /* Capture/compare interrupt enable */
#define CCI (0x0008) /* Capture input signal (read) */
#define OUT (0x0004) /* PWM Output signal if output mode 0 */
#define COV (0x0002) /* Capture/compare overflow flag */
#define CCIFG (0x0001) /* Capture/compare interrupt flag */
#define OUTMOD_0 (0x0000) /* PWM output mode: 0 - output only */
#define OUTMOD_1 (0x0020) /* PWM output mode: 1 - set */
#define OUTMOD_2 (0x0040) /* PWM output mode: 2 - PWM toggle/reset */
#define OUTMOD_3 (0x0060) /* PWM output mode: 3 - PWM set/reset */
#define OUTMOD_4 (0x0080) /* PWM output mode: 4 - toggle */
#define OUTMOD_5 (0x00A0) /* PWM output mode: 5 - Reset */
#define OUTMOD_6 (0x00C0) /* PWM output mode: 6 - PWM toggle/set */
#define OUTMOD_7 (0x00E0) /* PWM output mode: 7 - PWM reset/set */
#define CCIS_0 (0x0000) /* Capture input select: 0 - CCIxA */
#define CCIS_1 (0x1000) /* Capture input select: 1 - CCIxB */
#define CCIS_2 (0x2000) /* Capture input select: 2 - GND */
#define CCIS_3 (0x3000) /* Capture input select: 3 - Vcc */
#define CM_0 (0x0000) /* Capture mode: 0 - disabled */
#define CM_1 (0x4000) /* Capture mode: 1 - pos. edge */
#define CM_2 (0x8000) /* Capture mode: 1 - neg. edge */
#define CM_3 (0xC000) /* Capture mode: 1 - both edges */
/* TA3IV Definitions */
#define TAIV_NONE (0x0000) /* No Interrupt pending */
#define TAIV_TACCR1 (0x0002) /* TACCR1_CCIFG */
#define TAIV_TACCR2 (0x0004) /* TACCR2_CCIFG */
#define TAIV_6 (0x0006) /* Reserved */
#define TAIV_8 (0x0008) /* Reserved */
#define TAIV_TAIFG (0x000A) /* TAIFG */
/************************************************************
* Timer B3
************************************************************/
#define __MSP430_HAS_TB3__ /* Definition to show that Module is available */
#define TBIV_ 0x011E /* Timer B Interrupt Vector Word */
const_sfrw(TBIV, TBIV_);
#define TBCTL_ 0x0180 /* Timer B Control */
sfrw(TBCTL, TBCTL_);
#define TBCCTL0_ 0x0182 /* Timer B Capture/Compare Control 0 */
sfrw(TBCCTL0, TBCCTL0_);
#define TBCCTL1_ 0x0184 /* Timer B Capture/Compare Control 1 */
sfrw(TBCCTL1, TBCCTL1_);
#define TBCCTL2_ 0x0186 /* Timer B Capture/Compare Control 2 */
sfrw(TBCCTL2, TBCCTL2_);
#define TBR_ 0x0190 /* Timer B Counter Register */
sfrw(TBR, TBR_);
#define TBCCR0_ 0x0192 /* Timer B Capture/Compare 0 */
sfrw(TBCCR0, TBCCR0_);
#define TBCCR1_ 0x0194 /* Timer B Capture/Compare 1 */
sfrw(TBCCR1, TBCCR1_);
#define TBCCR2_ 0x0196 /* Timer B Capture/Compare 2 */
sfrw(TBCCR2, TBCCR2_);
/* Alternate register names - 5xx style */
#define TB0IV TBIV /* Timer B Interrupt Vector Word */
#define TB0CTL TBCTL /* Timer B Control */
#define TB0CCTL0 TBCCTL0 /* Timer B Capture/Compare Control 0 */
#define TB0CCTL1 TBCCTL1 /* Timer B Capture/Compare Control 1 */
#define TB0CCTL2 TBCCTL2 /* Timer B Capture/Compare Control 2 */
#define TB0R TBR /* Timer B Counter Register */
#define TB0CCR0 TBCCR0 /* Timer B Capture/Compare 0 */
#define TB0CCR1 TBCCR1 /* Timer B Capture/Compare 1 */
#define TB0CCR2 TBCCR2 /* Timer B Capture/Compare 2 */
#define TB0IV_ TBIV_ /* Timer B Interrupt Vector Word */
#define TB0CTL_ TBCTL_ /* Timer B Control */
#define TB0CCTL0_ TBCCTL0_ /* Timer B Capture/Compare Control 0 */
#define TB0CCTL1_ TBCCTL1_ /* Timer B Capture/Compare Control 1 */
#define TB0CCTL2_ TBCCTL2_ /* Timer B Capture/Compare Control 2 */
#define TB0R_ TBR_ /* Timer B Counter Register */
#define TB0CCR0_ TBCCR0_ /* Timer B Capture/Compare 0 */
#define TB0CCR1_ TBCCR1_ /* Timer B Capture/Compare 1 */
#define TB0CCR2_ TBCCR2_ /* Timer B Capture/Compare 2 */
#define TBCLGRP1 (0x4000) /* Timer B Compare latch load group 1 */
#define TBCLGRP0 (0x2000) /* Timer B Compare latch load group 0 */
#define CNTL1 (0x1000) /* Counter lenght 1 */
#define CNTL0 (0x0800) /* Counter lenght 0 */
#define TBSSEL1 (0x0200) /* Clock source 1 */
#define TBSSEL0 (0x0100) /* Clock source 0 */
#define TBCLR (0x0004) /* Timer B counter clear */
#define TBIE (0x0002) /* Timer B interrupt enable */
#define TBIFG (0x0001) /* Timer B interrupt flag */
#define SHR1 (0x4000) /* Timer B Compare latch load group 1 */
#define SHR0 (0x2000) /* Timer B Compare latch load group 0 */
#define TBSSEL_0 (0x0000) /* Clock Source: TBCLK */
#define TBSSEL_1 (0x0100) /* Clock Source: ACLK */
#define TBSSEL_2 (0x0200) /* Clock Source: SMCLK */
#define TBSSEL_3 (0x0300) /* Clock Source: INCLK */
#define CNTL_0 (0x0000) /* Counter lenght: 16 bit */
#define CNTL_1 (0x0800) /* Counter lenght: 12 bit */
#define CNTL_2 (0x1000) /* Counter lenght: 10 bit */
#define CNTL_3 (0x1800) /* Counter lenght: 8 bit */
#define SHR_0 (0x0000) /* Timer B Group: 0 - individually */
#define SHR_1 (0x2000) /* Timer B Group: 1 - 3 groups (1-2, 3-4, 5-6) */
#define SHR_2 (0x4000) /* Timer B Group: 2 - 2 groups (1-3, 4-6)*/
#define SHR_3 (0x6000) /* Timer B Group: 3 - 1 group (all) */
#define TBCLGRP_0 (0x0000) /* Timer B Group: 0 - individually */
#define TBCLGRP_1 (0x2000) /* Timer B Group: 1 - 3 groups (1-2, 3-4, 5-6) */
#define TBCLGRP_2 (0x4000) /* Timer B Group: 2 - 2 groups (1-3, 4-6)*/
#define TBCLGRP_3 (0x6000) /* Timer B Group: 3 - 1 group (all) */
/* Additional Timer B Control Register bits are defined in Timer A */
#define CLLD1 (0x0400) /* Compare latch load source 1 */
#define CLLD0 (0x0200) /* Compare latch load source 0 */
#define SLSHR1 (0x0400) /* Compare latch load source 1 */
#define SLSHR0 (0x0200) /* Compare latch load source 0 */
#define SLSHR_0 (0x0000) /* Compare latch load sourec : 0 - immediate */
#define SLSHR_1 (0x0200) /* Compare latch load sourec : 1 - TBR counts to 0 */
#define SLSHR_2 (0x0400) /* Compare latch load sourec : 2 - up/down */
#define SLSHR_3 (0x0600) /* Compare latch load sourec : 3 - TBR counts to TBCTL0 */
#define CLLD_0 (0x0000) /* Compare latch load sourec : 0 - immediate */
#define CLLD_1 (0x0200) /* Compare latch load sourec : 1 - TBR counts to 0 */
#define CLLD_2 (0x0400) /* Compare latch load sourec : 2 - up/down */
#define CLLD_3 (0x0600) /* Compare latch load sourec : 3 - TBR counts to TBCTL0 */
/* TB3IV Definitions */
#define TBIV_NONE (0x0000) /* No Interrupt pending */
#define TBIV_TBCCR1 (0x0002) /* TBCCR1_CCIFG */
#define TBIV_TBCCR2 (0x0004) /* TBCCR2_CCIFG */
#define TBIV_3 (0x0006) /* Reserved */
#define TBIV_4 (0x0008) /* Reserved */
#define TBIV_5 (0x000A) /* Reserved */
#define TBIV_6 (0x000C) /* Reserved */
#define TBIV_TBIFG (0x000E) /* TBIFG */
/************************************************************
* USCI
************************************************************/
#define __MSP430_HAS_USCI__ /* Definition to show that Module is available */
#define __MSP430_HAS_USCI_AB0__ /* Definition to show that Module is available */
#define __MSP430_HAS_USCI_AB1__ /* Definition to show that Module is available */
#define UCA0CTL0_ 0x0060 /* USCI A0 Control Register 0 */
sfrb(UCA0CTL0, UCA0CTL0_);
#define UCA0CTL1_ 0x0061 /* USCI A0 Control Register 1 */
sfrb(UCA0CTL1, UCA0CTL1_);
#define UCA0BR0_ 0x0062 /* USCI A0 Baud Rate 0 */
sfrb(UCA0BR0, UCA0BR0_);
#define UCA0BR1_ 0x0063 /* USCI A0 Baud Rate 1 */
sfrb(UCA0BR1, UCA0BR1_);
#define UCA0MCTL_ 0x0064 /* USCI A0 Modulation Control */
sfrb(UCA0MCTL, UCA0MCTL_);
#define UCA0STAT_ 0x0065 /* USCI A0 Status Register */
sfrb(UCA0STAT, UCA0STAT_);
#define UCA0RXBUF_ 0x0066 /* USCI A0 Receive Buffer */
const_sfrb(UCA0RXBUF, UCA0RXBUF_);
#define UCA0TXBUF_ 0x0067 /* USCI A0 Transmit Buffer */
sfrb(UCA0TXBUF, UCA0TXBUF_);
#define UCA0ABCTL_ 0x005D /* USCI A0 LIN Control */
sfrb(UCA0ABCTL, UCA0ABCTL_);
#define UCA0IRTCTL_ 0x005E /* USCI A0 IrDA Transmit Control */
sfrb(UCA0IRTCTL, UCA0IRTCTL_);
#define UCA0IRRCTL_ 0x005F /* USCI A0 IrDA Receive Control */
sfrb(UCA0IRRCTL, UCA0IRRCTL_);
#define UCB0CTL0_ 0x0068 /* USCI B0 Control Register 0 */
sfrb(UCB0CTL0, UCB0CTL0_);
#define UCB0CTL1_ 0x0069 /* USCI B0 Control Register 1 */
sfrb(UCB0CTL1, UCB0CTL1_);
#define UCB0BR0_ 0x006A /* USCI B0 Baud Rate 0 */
sfrb(UCB0BR0, UCB0BR0_);
#define UCB0BR1_ 0x006B /* USCI B0 Baud Rate 1 */
sfrb(UCB0BR1, UCB0BR1_);
#define UCB0I2CIE_ 0x006C /* USCI B0 I2C Interrupt Enable Register */
sfrb(UCB0I2CIE, UCB0I2CIE_);
#define UCB0STAT_ 0x006D /* USCI B0 Status Register */
sfrb(UCB0STAT, UCB0STAT_);
#define UCB0RXBUF_ 0x006E /* USCI B0 Receive Buffer */
const_sfrb(UCB0RXBUF, UCB0RXBUF_);
#define UCB0TXBUF_ 0x006F /* USCI B0 Transmit Buffer */
sfrb(UCB0TXBUF, UCB0TXBUF_);
/* Note: Devices with SD16 have the next two registers on a different address */
#define UCB0I2COA_ 0x016C /* USCI B0 I2C Own Address */
sfrw(UCB0I2COA, UCB0I2COA_);
#define UCB0I2CSA_ 0x016E /* USCI B0 I2C Slave Address */
sfrw(UCB0I2CSA, UCB0I2CSA_);
#define UCA1CTL0_ 0x00D0 /* USCI A1 Control Register 0 */
sfrb(UCA1CTL0, UCA1CTL0_);
#define UCA1CTL1_ 0x00D1 /* USCI A1 Control Register 1 */
sfrb(UCA1CTL1, UCA1CTL1_);
#define UCA1BR0_ 0x00D2 /* USCI A1 Baud Rate 0 */
sfrb(UCA1BR0, UCA1BR0_);
#define UCA1BR1_ 0x00D3 /* USCI A1 Baud Rate 1 */
sfrb(UCA1BR1, UCA1BR1_);
#define UCA1MCTL_ 0x00D4 /* USCI A1 Modulation Control */
sfrb(UCA1MCTL, UCA1MCTL_);
#define UCA1STAT_ 0x00D5 /* USCI A1 Status Register */
sfrb(UCA1STAT, UCA1STAT_);
#define UCA1RXBUF_ 0x00D6 /* USCI A1 Receive Buffer */
const_sfrb(UCA1RXBUF, UCA1RXBUF_);
#define UCA1TXBUF_ 0x00D7 /* USCI A1 Transmit Buffer */
sfrb(UCA1TXBUF, UCA1TXBUF_);
#define UCA1ABCTL_ 0x00CD /* USCI A1 LIN Control */
sfrb(UCA1ABCTL, UCA1ABCTL_);
#define UCA1IRTCTL_ 0x00CE /* USCI A1 IrDA Transmit Control */
sfrb(UCA1IRTCTL, UCA1IRTCTL_);
#define UCA1IRRCTL_ 0x00CF /* USCI A1 IrDA Receive Control */
sfrb(UCA1IRRCTL, UCA1IRRCTL_);
#define UCB1CTL0_ 0x00D8 /* USCI B1 Control Register 0 */
sfrb(UCB1CTL0, UCB1CTL0_);
#define UCB1CTL1_ 0x00D9 /* USCI B1 Control Register 1 */
sfrb(UCB1CTL1, UCB1CTL1_);
#define UCB1BR0_ 0x00DA /* USCI B1 Baud Rate 0 */
sfrb(UCB1BR0, UCB1BR0_);
#define UCB1BR1_ 0x00DB /* USCI B1 Baud Rate 1 */
sfrb(UCB1BR1, UCB1BR1_);
#define UCB1I2CIE_ 0x00DC /* USCI B1 I2C Interrupt Enable Register */
sfrb(UCB1I2CIE, UCB1I2CIE_);
#define UCB1STAT_ 0x00DD /* USCI B1 Status Register */
sfrb(UCB1STAT, UCB1STAT_);
#define UCB1RXBUF_ 0x00DE /* USCI B1 Receive Buffer */
const_sfrb(UCB1RXBUF, UCB1RXBUF_);
#define UCB1TXBUF_ 0x00DF /* USCI B1 Transmit Buffer */
sfrb(UCB1TXBUF, UCB1TXBUF_);
#define UCB1I2COA_ 0x017C /* USCI B1 I2C Own Address */
sfrw(UCB1I2COA, UCB1I2COA_);
#define UCB1I2CSA_ 0x017E /* USCI B1 I2C Slave Address */
sfrw(UCB1I2CSA, UCB1I2CSA_);
// UART-Mode Bits
#define UCPEN (0x80) /* Async. Mode: Parity enable */
#define UCPAR (0x40) /* Async. Mode: Parity 0:odd / 1:even */
#define UCMSB (0x20) /* Async. Mode: MSB first 0:LSB / 1:MSB */
#define UC7BIT (0x10) /* Async. Mode: Data Bits 0:8-bits / 1:7-bits */
#define UCSPB (0x08) /* Async. Mode: Stop Bits 0:one / 1: two */
#define UCMODE1 (0x04) /* Async. Mode: USCI Mode 1 */
#define UCMODE0 (0x02) /* Async. Mode: USCI Mode 0 */
#define UCSYNC (0x01) /* Sync-Mode 0:UART-Mode / 1:SPI-Mode */
// SPI-Mode Bits
#define UCCKPH (0x80) /* Sync. Mode: Clock Phase */
#define UCCKPL (0x40) /* Sync. Mode: Clock Polarity */
#define UCMST (0x08) /* Sync. Mode: Master Select */
// I2C-Mode Bits
#define UCA10 (0x80) /* 10-bit Address Mode */
#define UCSLA10 (0x40) /* 10-bit Slave Address Mode */
#define UCMM (0x20) /* Multi-Master Environment */
//#define res (0x10) /* reserved */
#define UCMODE_0 (0x00) /* Sync. Mode: USCI Mode: 0 */
#define UCMODE_1 (0x02) /* Sync. Mode: USCI Mode: 1 */
#define UCMODE_2 (0x04) /* Sync. Mode: USCI Mode: 2 */
#define UCMODE_3 (0x06) /* Sync. Mode: USCI Mode: 3 */
// UART-Mode Bits
#define UCSSEL1 (0x80) /* USCI 0 Clock Source Select 1 */
#define UCSSEL0 (0x40) /* USCI 0 Clock Source Select 0 */
#define UCRXEIE (0x20) /* RX Error interrupt enable */
#define UCBRKIE (0x10) /* Break interrupt enable */
#define UCDORM (0x08) /* Dormant (Sleep) Mode */
#define UCTXADDR (0x04) /* Send next Data as Address */
#define UCTXBRK (0x02) /* Send next Data as Break */
#define UCSWRST (0x01) /* USCI Software Reset */
// SPI-Mode Bits
//#define res (0x20) /* reserved */
//#define res (0x10) /* reserved */
//#define res (0x08) /* reserved */
//#define res (0x04) /* reserved */
//#define res (0x02) /* reserved */
// I2C-Mode Bits
//#define res (0x20) /* reserved */
#define UCTR (0x10) /* Transmit/Receive Select/Flag */
#define UCTXNACK (0x08) /* Transmit NACK */
#define UCTXSTP (0x04) /* Transmit STOP */
#define UCTXSTT (0x02) /* Transmit START */
#define UCSSEL_0 (0x00) /* USCI 0 Clock Source: 0 */
#define UCSSEL_1 (0x40) /* USCI 0 Clock Source: 1 */
#define UCSSEL_2 (0x80) /* USCI 0 Clock Source: 2 */
#define UCSSEL_3 (0xC0) /* USCI 0 Clock Source: 3 */
#define UCBRF3 (0x80) /* USCI First Stage Modulation Select 3 */
#define UCBRF2 (0x40) /* USCI First Stage Modulation Select 2 */
#define UCBRF1 (0x20) /* USCI First Stage Modulation Select 1 */
#define UCBRF0 (0x10) /* USCI First Stage Modulation Select 0 */
#define UCBRS2 (0x08) /* USCI Second Stage Modulation Select 2 */
#define UCBRS1 (0x04) /* USCI Second Stage Modulation Select 1 */
#define UCBRS0 (0x02) /* USCI Second Stage Modulation Select 0 */
#define UCOS16 (0x01) /* USCI 16-times Oversampling enable */
#define UCBRF_0 (0x00) /* USCI First Stage Modulation: 0 */
#define UCBRF_1 (0x10) /* USCI First Stage Modulation: 1 */
#define UCBRF_2 (0x20) /* USCI First Stage Modulation: 2 */
#define UCBRF_3 (0x30) /* USCI First Stage Modulation: 3 */
#define UCBRF_4 (0x40) /* USCI First Stage Modulation: 4 */
#define UCBRF_5 (0x50) /* USCI First Stage Modulation: 5 */
#define UCBRF_6 (0x60) /* USCI First Stage Modulation: 6 */
#define UCBRF_7 (0x70) /* USCI First Stage Modulation: 7 */
#define UCBRF_8 (0x80) /* USCI First Stage Modulation: 8 */
#define UCBRF_9 (0x90) /* USCI First Stage Modulation: 9 */
#define UCBRF_10 (0xA0) /* USCI First Stage Modulation: A */
#define UCBRF_11 (0xB0) /* USCI First Stage Modulation: B */
#define UCBRF_12 (0xC0) /* USCI First Stage Modulation: C */
#define UCBRF_13 (0xD0) /* USCI First Stage Modulation: D */
#define UCBRF_14 (0xE0) /* USCI First Stage Modulation: E */
#define UCBRF_15 (0xF0) /* USCI First Stage Modulation: F */
#define UCBRS_0 (0x00) /* USCI Second Stage Modulation: 0 */
#define UCBRS_1 (0x02) /* USCI Second Stage Modulation: 1 */
#define UCBRS_2 (0x04) /* USCI Second Stage Modulation: 2 */
#define UCBRS_3 (0x06) /* USCI Second Stage Modulation: 3 */
#define UCBRS_4 (0x08) /* USCI Second Stage Modulation: 4 */
#define UCBRS_5 (0x0A) /* USCI Second Stage Modulation: 5 */
#define UCBRS_6 (0x0C) /* USCI Second Stage Modulation: 6 */
#define UCBRS_7 (0x0E) /* USCI Second Stage Modulation: 7 */
#define UCLISTEN (0x80) /* USCI Listen mode */
#define UCFE (0x40) /* USCI Frame Error Flag */
#define UCOE (0x20) /* USCI Overrun Error Flag */
#define UCPE (0x10) /* USCI Parity Error Flag */
#define UCBRK (0x08) /* USCI Break received */
#define UCRXERR (0x04) /* USCI RX Error Flag */
#define UCADDR (0x02) /* USCI Address received Flag */
#define UCBUSY (0x01) /* USCI Busy Flag */
#define UCIDLE (0x02) /* USCI Idle line detected Flag */
//#define res (0x80) /* reserved */
//#define res (0x40) /* reserved */
//#define res (0x20) /* reserved */
//#define res (0x10) /* reserved */
#define UCNACKIE (0x08) /* NACK Condition interrupt enable */
#define UCSTPIE (0x04) /* STOP Condition interrupt enable */
#define UCSTTIE (0x02) /* START Condition interrupt enable */
#define UCALIE (0x01) /* Arbitration Lost interrupt enable */
#define UCSCLLOW (0x40) /* SCL low */
#define UCGC (0x20) /* General Call address received Flag */
#define UCBBUSY (0x10) /* Bus Busy Flag */
#define UCNACKIFG (0x08) /* NAK Condition interrupt Flag */
#define UCSTPIFG (0x04) /* STOP Condition interrupt Flag */
#define UCSTTIFG (0x02) /* START Condition interrupt Flag */
#define UCALIFG (0x01) /* Arbitration Lost interrupt Flag */
#define UCIRTXPL5 (0x80) /* IRDA Transmit Pulse Length 5 */
#define UCIRTXPL4 (0x40) /* IRDA Transmit Pulse Length 4 */
#define UCIRTXPL3 (0x20) /* IRDA Transmit Pulse Length 3 */
#define UCIRTXPL2 (0x10) /* IRDA Transmit Pulse Length 2 */
#define UCIRTXPL1 (0x08) /* IRDA Transmit Pulse Length 1 */
#define UCIRTXPL0 (0x04) /* IRDA Transmit Pulse Length 0 */
#define UCIRTXCLK (0x02) /* IRDA Transmit Pulse Clock Select */
#define UCIREN (0x01) /* IRDA Encoder/Decoder enable */
#define UCIRRXFL5 (0x80) /* IRDA Receive Filter Length 5 */
#define UCIRRXFL4 (0x40) /* IRDA Receive Filter Length 4 */
#define UCIRRXFL3 (0x20) /* IRDA Receive Filter Length 3 */
#define UCIRRXFL2 (0x10) /* IRDA Receive Filter Length 2 */
#define UCIRRXFL1 (0x08) /* IRDA Receive Filter Length 1 */
#define UCIRRXFL0 (0x04) /* IRDA Receive Filter Length 0 */
#define UCIRRXPL (0x02) /* IRDA Receive Input Polarity */
#define UCIRRXFE (0x01) /* IRDA Receive Filter enable */
//#define res (0x80) /* reserved */
//#define res (0x40) /* reserved */
#define UCDELIM1 (0x20) /* Break Sync Delimiter 1 */
#define UCDELIM0 (0x10) /* Break Sync Delimiter 0 */
#define UCSTOE (0x08) /* Sync-Field Timeout error */
#define UCBTOE (0x04) /* Break Timeout error */
//#define res (0x02) /* reserved */
#define UCABDEN (0x01) /* Auto Baud Rate detect enable */
#define UCGCEN (0x8000) /* I2C General Call enable */
#define UCOA9 (0x0200) /* I2C Own Address 9 */
#define UCOA8 (0x0100) /* I2C Own Address 8 */
#define UCOA7 (0x0080) /* I2C Own Address 7 */
#define UCOA6 (0x0040) /* I2C Own Address 6 */
#define UCOA5 (0x0020) /* I2C Own Address 5 */
#define UCOA4 (0x0010) /* I2C Own Address 4 */
#define UCOA3 (0x0008) /* I2C Own Address 3 */
#define UCOA2 (0x0004) /* I2C Own Address 2 */
#define UCOA1 (0x0002) /* I2C Own Address 1 */
#define UCOA0 (0x0001) /* I2C Own Address 0 */
#define UCSA9 (0x0200) /* I2C Slave Address 9 */
#define UCSA8 (0x0100) /* I2C Slave Address 8 */
#define UCSA7 (0x0080) /* I2C Slave Address 7 */
#define UCSA6 (0x0040) /* I2C Slave Address 6 */
#define UCSA5 (0x0020) /* I2C Slave Address 5 */
#define UCSA4 (0x0010) /* I2C Slave Address 4 */
#define UCSA3 (0x0008) /* I2C Slave Address 3 */
#define UCSA2 (0x0004) /* I2C Slave Address 2 */
#define UCSA1 (0x0002) /* I2C Slave Address 1 */
#define UCSA0 (0x0001) /* I2C Slave Address 0 */
/************************************************************
* WATCHDOG TIMER
************************************************************/
#define __MSP430_HAS_WDT__ /* Definition to show that Module is available */
#define WDTCTL_ 0x0120 /* Watchdog Timer Control */
sfrw(WDTCTL, WDTCTL_);
/* The bit names have been prefixed with "WDT" */
#define WDTIS0 (0x0001)
#define WDTIS1 (0x0002)
#define WDTSSEL (0x0004)
#define WDTCNTCL (0x0008)
#define WDTTMSEL (0x0010)
#define WDTNMI (0x0020)
#define WDTNMIES (0x0040)
#define WDTHOLD (0x0080)
#define WDTPW (0x5A00)
/* WDT-interval times [1ms] coded with Bits 0-2 */
/* WDT is clocked by fSMCLK (assumed 1MHz) */
#define WDT_MDLY_32 (WDTPW+WDTTMSEL+WDTCNTCL) /* 32ms interval (default) */
#define WDT_MDLY_8 (WDTPW+WDTTMSEL+WDTCNTCL+WDTIS0) /* 8ms " */
#define WDT_MDLY_0_5 (WDTPW+WDTTMSEL+WDTCNTCL+WDTIS1) /* 0.5ms " */
#define WDT_MDLY_0_064 (WDTPW+WDTTMSEL+WDTCNTCL+WDTIS1+WDTIS0) /* 0.064ms " */
/* WDT is clocked by fACLK (assumed 32KHz) */
#define WDT_ADLY_1000 (WDTPW+WDTTMSEL+WDTCNTCL+WDTSSEL) /* 1000ms " */
#define WDT_ADLY_250 (WDTPW+WDTTMSEL+WDTCNTCL+WDTSSEL+WDTIS0) /* 250ms " */
#define WDT_ADLY_16 (WDTPW+WDTTMSEL+WDTCNTCL+WDTSSEL+WDTIS1) /* 16ms " */
#define WDT_ADLY_1_9 (WDTPW+WDTTMSEL+WDTCNTCL+WDTSSEL+WDTIS1+WDTIS0) /* 1.9ms " */
/* Watchdog mode -> reset after expired time */
/* WDT is clocked by fSMCLK (assumed 1MHz) */
#define WDT_MRST_32 (WDTPW+WDTCNTCL) /* 32ms interval (default) */
#define WDT_MRST_8 (WDTPW+WDTCNTCL+WDTIS0) /* 8ms " */
#define WDT_MRST_0_5 (WDTPW+WDTCNTCL+WDTIS1) /* 0.5ms " */
#define WDT_MRST_0_064 (WDTPW+WDTCNTCL+WDTIS1+WDTIS0) /* 0.064ms " */
/* WDT is clocked by fACLK (assumed 32KHz) */
#define WDT_ARST_1000 (WDTPW+WDTCNTCL+WDTSSEL) /* 1000ms " */
#define WDT_ARST_250 (WDTPW+WDTCNTCL+WDTSSEL+WDTIS0) /* 250ms " */
#define WDT_ARST_16 (WDTPW+WDTCNTCL+WDTSSEL+WDTIS1) /* 16ms " */
#define WDT_ARST_1_9 (WDTPW+WDTCNTCL+WDTSSEL+WDTIS1+WDTIS0) /* 1.9ms " */
/* INTERRUPT CONTROL */
/* These two bits are defined in the Special Function Registers */
/* #define WDTIE 0x01 */
/* #define WDTIFG 0x01 */
/************************************************************
* Interrupt Vectors (offset from 0xFFC0)
************************************************************/
#define DMA_VECTOR (0x001E) /* 0xFFDE DMA */
#define BASICTIMER_VECTOR (0x0020) /* 0xFFE0 Basic Timer / RTC */
#define PORT2_VECTOR (0x0022) /* 0xFFE2 Port 2 */
#define USCIAB1TX_VECTOR (0x0024) /* 0xFFE4 USCI A1/B1 Transmit */
#define USCIAB1RX_VECTOR (0x0026) /* 0xFFE6 USCI A1/B1 Receive */
#define PORT1_VECTOR (0x0028) /* 0xFFE8 Port 1 */
#define TIMERA1_VECTOR (0x002A) /* 0xFFEA Timer A CC1-2, TA */
#define TIMERA0_VECTOR (0x002C) /* 0xFFEC Timer A CC0 */
#define SD16A_VECTOR (0x002E) /* 0xFFEE ADC */
#define USCIAB0TX_VECTOR (0x0030) /* 0xFFF0 USCI A0/B0 Transmit */
#define USCIAB0RX_VECTOR (0x0032) /* 0xFFF2 USCI A0/B0 Receive */
#define WDT_VECTOR (0x0034) /* 0xFFF4 Watchdog Timer */
#define COMPARATORA_VECTOR (0x0036) /* 0xFFF6 Comparator A */
#define TIMERB1_VECTOR (0x0038) /* 0xFFF8 Timer B CC1-2, TB */
#define TIMERB0_VECTOR (0x003A) /* 0xFFFA Timer B CC0 */
#define NMI_VECTOR (0x003C) /* 0xFFFC Non-maskable */
#define RESET_VECTOR (0x003E) /* 0xFFFE Reset [Highest Priority] */
/************************************************************
* End of Modules
************************************************************/
#ifdef __cplusplus
}
#endif /* extern "C" */
#endif /* #ifndef __msp430x471x3 */
|