/usr/msp430/include/msp430g2253.h is in msp430mcu 20120406-2.
This file is owned by root:root, with mode 0o644.
The actual contents of the file can be viewed below.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765 766 767 768 769 770 771 772 773 774 775 776 777 778 779 780 781 782 783 784 785 786 787 788 789 790 791 792 793 794 795 796 797 798 799 800 801 802 803 804 805 806 807 808 809 810 811 812 813 814 815 816 817 818 819 820 821 822 823 824 825 826 827 828 829 830 831 832 833 834 835 836 837 838 839 840 841 842 843 844 845 846 847 848 849 850 851 852 853 854 855 856 857 858 859 860 861 862 863 864 865 866 867 868 869 870 871 872 873 874 875 876 877 878 879 880 881 882 883 884 885 886 887 888 889 890 891 892 893 894 895 896 897 898 899 900 901 902 903 904 905 906 907 908 909 910 911 912 913 914 915 916 917 918 919 920 921 922 923 924 925 926 927 928 929 930 931 932 933 934 935 936 937 938 939 940 941 942 943 944 945 946 947 948 949 950 951 952 953 954 955 956 957 958 959 960 961 962 963 964 965 966 967 968 969 970 971 972 973 974 975 976 977 978 979 980 981 982 983 984 985 986 987 988 989 990 991 992 993 994 | /* ============================================================================ */
/* Copyright (c) 2012, Texas Instruments Incorporated */
/* All rights reserved. */
/* */
/* Redistribution and use in source and binary forms, with or without */
/* modification, are permitted provided that the following conditions */
/* are met: */
/* */
/* * Redistributions of source code must retain the above copyright */
/* notice, this list of conditions and the following disclaimer. */
/* */
/* * Redistributions in binary form must reproduce the above copyright */
/* notice, this list of conditions and the following disclaimer in the */
/* documentation and/or other materials provided with the distribution. */
/* */
/* * Neither the name of Texas Instruments Incorporated nor the names of */
/* its contributors may be used to endorse or promote products derived */
/* from this software without specific prior written permission. */
/* */
/* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" */
/* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, */
/* THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR */
/* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR */
/* CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, */
/* EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, */
/* PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; */
/* OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, */
/* WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR */
/* OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, */
/* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */
/* ============================================================================ */
/********************************************************************
*
* Standard register and bit definitions for the Texas Instruments
* MSP430 microcontroller.
*
* This file supports assembler and C development for
* MSP430G2253 devices.
*
* Texas Instruments, Version 1.0
*
* Rev. 1.0, Setup
*
********************************************************************/
#ifndef __MSP430G2253
#define __MSP430G2253
#define __MSP430_HEADER_VERSION__ 1064
#define __MSP430_TI_HEADERS__
#ifdef __cplusplus
extern "C" {
#endif
#include <iomacros.h>
/************************************************************
* STANDARD BITS
************************************************************/
#define BIT0 (0x0001)
#define BIT1 (0x0002)
#define BIT2 (0x0004)
#define BIT3 (0x0008)
#define BIT4 (0x0010)
#define BIT5 (0x0020)
#define BIT6 (0x0040)
#define BIT7 (0x0080)
#define BIT8 (0x0100)
#define BIT9 (0x0200)
#define BITA (0x0400)
#define BITB (0x0800)
#define BITC (0x1000)
#define BITD (0x2000)
#define BITE (0x4000)
#define BITF (0x8000)
/************************************************************
* STATUS REGISTER BITS
************************************************************/
#define C (0x0001)
#define Z (0x0002)
#define N (0x0004)
#define V (0x0100)
#define GIE (0x0008)
#define CPUOFF (0x0010)
#define OSCOFF (0x0020)
#define SCG0 (0x0040)
#define SCG1 (0x0080)
/* Low Power Modes coded with Bits 4-7 in SR */
#ifndef __STDC__ /* Begin #defines for assembler */
#define LPM0 (CPUOFF)
#define LPM1 (SCG0+CPUOFF)
#define LPM2 (SCG1+CPUOFF)
#define LPM3 (SCG1+SCG0+CPUOFF)
#define LPM4 (SCG1+SCG0+OSCOFF+CPUOFF)
/* End #defines for assembler */
#else /* Begin #defines for C */
#define LPM0_bits (CPUOFF)
#define LPM1_bits (SCG0+CPUOFF)
#define LPM2_bits (SCG1+CPUOFF)
#define LPM3_bits (SCG1+SCG0+CPUOFF)
#define LPM4_bits (SCG1+SCG0+OSCOFF+CPUOFF)
#include "in430.h"
#define LPM0 _BIS_SR(LPM0_bits) /* Enter Low Power Mode 0 */
#define LPM0_EXIT _BIC_SR_IRQ(LPM0_bits) /* Exit Low Power Mode 0 */
#define LPM1 _BIS_SR(LPM1_bits) /* Enter Low Power Mode 1 */
#define LPM1_EXIT _BIC_SR_IRQ(LPM1_bits) /* Exit Low Power Mode 1 */
#define LPM2 _BIS_SR(LPM2_bits) /* Enter Low Power Mode 2 */
#define LPM2_EXIT _BIC_SR_IRQ(LPM2_bits) /* Exit Low Power Mode 2 */
#define LPM3 _BIS_SR(LPM3_bits) /* Enter Low Power Mode 3 */
#define LPM3_EXIT _BIC_SR_IRQ(LPM3_bits) /* Exit Low Power Mode 3 */
#define LPM4 _BIS_SR(LPM4_bits) /* Enter Low Power Mode 4 */
#define LPM4_EXIT _BIC_SR_IRQ(LPM4_bits) /* Exit Low Power Mode 4 */
#endif /* End #defines for C */
/************************************************************
* PERIPHERAL FILE MAP
************************************************************/
/************************************************************
* SPECIAL FUNCTION REGISTER ADDRESSES + CONTROL BITS
************************************************************/
#define IE1_ 0x0000 /* Interrupt Enable 1 */
sfrb(IE1, IE1_);
#define WDTIE (0x01) /* Watchdog Interrupt Enable */
#define OFIE (0x02) /* Osc. Fault Interrupt Enable */
#define NMIIE (0x10) /* NMI Interrupt Enable */
#define ACCVIE (0x20) /* Flash Access Violation Interrupt Enable */
#define IFG1_ 0x0002 /* Interrupt Flag 1 */
sfrb(IFG1, IFG1_);
#define WDTIFG (0x01) /* Watchdog Interrupt Flag */
#define OFIFG (0x02) /* Osc. Fault Interrupt Flag */
#define PORIFG (0x04) /* Power On Interrupt Flag */
#define RSTIFG (0x08) /* Reset Interrupt Flag */
#define NMIIFG (0x10) /* NMI Interrupt Flag */
#define IE2_ 0x0001 /* Interrupt Enable 2 */
sfrb(IE2, IE2_);
#define UC0IE IE2
#define UCA0RXIE (0x01)
#define UCA0TXIE (0x02)
#define UCB0RXIE (0x04)
#define UCB0TXIE (0x08)
#define IFG2_ 0x0003 /* Interrupt Flag 2 */
sfrb(IFG2, IFG2_);
#define UC0IFG IFG2
#define UCA0RXIFG (0x01)
#define UCA0TXIFG (0x02)
#define UCB0RXIFG (0x04)
#define UCB0TXIFG (0x08)
/************************************************************
* ADC10
************************************************************/
#define __MSP430_HAS_ADC10__ /* Definition to show that Module is available */
#define ADC10DTC0_ 0x0048 /* ADC10 Data Transfer Control 0 */
sfrb(ADC10DTC0, ADC10DTC0_);
#define ADC10DTC1_ 0x0049 /* ADC10 Data Transfer Control 1 */
sfrb(ADC10DTC1, ADC10DTC1_);
#define ADC10AE0_ 0x004A /* ADC10 Analog Enable 0 */
sfrb(ADC10AE0, ADC10AE0_);
#define ADC10CTL0_ 0x01B0 /* ADC10 Control 0 */
sfrw(ADC10CTL0, ADC10CTL0_);
#define ADC10CTL1_ 0x01B2 /* ADC10 Control 1 */
sfrw(ADC10CTL1, ADC10CTL1_);
#define ADC10MEM_ 0x01B4 /* ADC10 Memory */
sfrw(ADC10MEM, ADC10MEM_);
#define ADC10SA_ 0x01BC /* ADC10 Data Transfer Start Address */
sfrw(ADC10SA, ADC10SA_);
/* ADC10CTL0 */
#define ADC10SC (0x001) /* ADC10 Start Conversion */
#define ENC (0x002) /* ADC10 Enable Conversion */
#define ADC10IFG (0x004) /* ADC10 Interrupt Flag */
#define ADC10IE (0x008) /* ADC10 Interrupt Enalbe */
#define ADC10ON (0x010) /* ADC10 On/Enable */
#define REFON (0x020) /* ADC10 Reference on */
#define REF2_5V (0x040) /* ADC10 Ref 0:1.5V / 1:2.5V */
#define MSC (0x080) /* ADC10 Multiple SampleConversion */
#define REFBURST (0x100) /* ADC10 Reference Burst Mode */
#define REFOUT (0x200) /* ADC10 Enalbe output of Ref. */
#define ADC10SR (0x400) /* ADC10 Sampling Rate 0:200ksps / 1:50ksps */
#define ADC10SHT0 (0x800) /* ADC10 Sample Hold Select Bit: 0 */
#define ADC10SHT1 (0x1000) /* ADC10 Sample Hold Select Bit: 1 */
#define SREF0 (0x2000) /* ADC10 Reference Select Bit: 0 */
#define SREF1 (0x4000) /* ADC10 Reference Select Bit: 1 */
#define SREF2 (0x8000) /* ADC10 Reference Select Bit: 2 */
#define ADC10SHT_0 (0x0000) /* 4 x ADC10CLKs */
#define ADC10SHT_1 (0x0800) /* 8 x ADC10CLKs */
#define ADC10SHT_2 (0x1000) /* 16 x ADC10CLKs */
#define ADC10SHT_3 (0x1800) /* 64 x ADC10CLKs */
#define SREF_0 (0x0000) /* VR+ = AVCC and VR- = AVSS */
#define SREF_1 (0x2000) /* VR+ = VREF+ and VR- = AVSS */
#define SREF_2 (0x4000) /* VR+ = VEREF+ and VR- = AVSS */
#define SREF_3 (0x6000) /* VR+ = VEREF+ and VR- = AVSS */
#define SREF_4 (0x8000) /* VR+ = AVCC and VR- = VREF-/VEREF- */
#define SREF_5 (0xA000) /* VR+ = VREF+ and VR- = VREF-/VEREF- */
#define SREF_6 (0xC000) /* VR+ = VEREF+ and VR- = VREF-/VEREF- */
#define SREF_7 (0xE000) /* VR+ = VEREF+ and VR- = VREF-/VEREF- */
/* ADC10CTL1 */
#define ADC10BUSY (0x0001) /* ADC10 BUSY */
#define CONSEQ0 (0x0002) /* ADC10 Conversion Sequence Select 0 */
#define CONSEQ1 (0x0004) /* ADC10 Conversion Sequence Select 1 */
#define ADC10SSEL0 (0x0008) /* ADC10 Clock Source Select Bit: 0 */
#define ADC10SSEL1 (0x0010) /* ADC10 Clock Source Select Bit: 1 */
#define ADC10DIV0 (0x0020) /* ADC10 Clock Divider Select Bit: 0 */
#define ADC10DIV1 (0x0040) /* ADC10 Clock Divider Select Bit: 1 */
#define ADC10DIV2 (0x0080) /* ADC10 Clock Divider Select Bit: 2 */
#define ISSH (0x0100) /* ADC10 Invert Sample Hold Signal */
#define ADC10DF (0x0200) /* ADC10 Data Format 0:binary 1:2's complement */
#define SHS0 (0x0400) /* ADC10 Sample/Hold Source Bit: 0 */
#define SHS1 (0x0800) /* ADC10 Sample/Hold Source Bit: 1 */
#define INCH0 (0x1000) /* ADC10 Input Channel Select Bit: 0 */
#define INCH1 (0x2000) /* ADC10 Input Channel Select Bit: 1 */
#define INCH2 (0x4000) /* ADC10 Input Channel Select Bit: 2 */
#define INCH3 (0x8000) /* ADC10 Input Channel Select Bit: 3 */
#define CONSEQ_0 (0x0000) /* Single channel single conversion */
#define CONSEQ_1 (0x0002) /* Sequence of channels */
#define CONSEQ_2 (0x0004) /* Repeat single channel */
#define CONSEQ_3 (0x0006) /* Repeat sequence of channels */
#define ADC10SSEL_0 (0x0000) /* ADC10OSC */
#define ADC10SSEL_1 (0x0008) /* ACLK */
#define ADC10SSEL_2 (0x0010) /* MCLK */
#define ADC10SSEL_3 (0x0018) /* SMCLK */
#define ADC10DIV_0 (0x0000) /* ADC10 Clock Divider Select 0 */
#define ADC10DIV_1 (0x0020) /* ADC10 Clock Divider Select 1 */
#define ADC10DIV_2 (0x0040) /* ADC10 Clock Divider Select 2 */
#define ADC10DIV_3 (0x0060) /* ADC10 Clock Divider Select 3 */
#define ADC10DIV_4 (0x0080) /* ADC10 Clock Divider Select 4 */
#define ADC10DIV_5 (0x00A0) /* ADC10 Clock Divider Select 5 */
#define ADC10DIV_6 (0x00C0) /* ADC10 Clock Divider Select 6 */
#define ADC10DIV_7 (0x00E0) /* ADC10 Clock Divider Select 7 */
#define SHS_0 (0x0000) /* ADC10SC */
#define SHS_1 (0x0400) /* TA3 OUT1 */
#define SHS_2 (0x0800) /* TA3 OUT0 */
#define SHS_3 (0x0C00) /* TA3 OUT2 */
#define INCH_0 (0x0000) /* Selects Channel 0 */
#define INCH_1 (0x1000) /* Selects Channel 1 */
#define INCH_2 (0x2000) /* Selects Channel 2 */
#define INCH_3 (0x3000) /* Selects Channel 3 */
#define INCH_4 (0x4000) /* Selects Channel 4 */
#define INCH_5 (0x5000) /* Selects Channel 5 */
#define INCH_6 (0x6000) /* Selects Channel 6 */
#define INCH_7 (0x7000) /* Selects Channel 7 */
#define INCH_8 (0x8000) /* Selects Channel 8 */
#define INCH_9 (0x9000) /* Selects Channel 9 */
#define INCH_10 (0xA000) /* Selects Channel 10 */
#define INCH_11 (0xB000) /* Selects Channel 11 */
#define INCH_12 (0xC000) /* Selects Channel 12 */
#define INCH_13 (0xD000) /* Selects Channel 13 */
#define INCH_14 (0xE000) /* Selects Channel 14 */
#define INCH_15 (0xF000) /* Selects Channel 15 */
/* ADC10DTC0 */
#define ADC10FETCH (0x001) /* This bit should normally be reset */
#define ADC10B1 (0x002) /* ADC10 block one */
#define ADC10CT (0x004) /* ADC10 continuous transfer */
#define ADC10TB (0x008) /* ADC10 two-block mode */
#define ADC10DISABLE (0x000) /* ADC10DTC1 */
/************************************************************
* Basic Clock Module
************************************************************/
#define __MSP430_HAS_BC2__ /* Definition to show that Module is available */
#define DCOCTL_ 0x0056 /* DCO Clock Frequency Control */
sfrb(DCOCTL, DCOCTL_);
#define BCSCTL1_ 0x0057 /* Basic Clock System Control 1 */
sfrb(BCSCTL1, BCSCTL1_);
#define BCSCTL2_ 0x0058 /* Basic Clock System Control 2 */
sfrb(BCSCTL2, BCSCTL2_);
#define BCSCTL3_ 0x0053 /* Basic Clock System Control 3 */
sfrb(BCSCTL3, BCSCTL3_);
#define MOD0 (0x01) /* Modulation Bit 0 */
#define MOD1 (0x02) /* Modulation Bit 1 */
#define MOD2 (0x04) /* Modulation Bit 2 */
#define MOD3 (0x08) /* Modulation Bit 3 */
#define MOD4 (0x10) /* Modulation Bit 4 */
#define DCO0 (0x20) /* DCO Select Bit 0 */
#define DCO1 (0x40) /* DCO Select Bit 1 */
#define DCO2 (0x80) /* DCO Select Bit 2 */
#define RSEL0 (0x01) /* Range Select Bit 0 */
#define RSEL1 (0x02) /* Range Select Bit 1 */
#define RSEL2 (0x04) /* Range Select Bit 2 */
#define RSEL3 (0x08) /* Range Select Bit 3 */
#define DIVA0 (0x10) /* ACLK Divider 0 */
#define DIVA1 (0x20) /* ACLK Divider 1 */
#define XTS (0x40) /* LFXTCLK 0:Low Freq. / 1: High Freq. */
#define XT2OFF (0x80) /* Enable XT2CLK */
#define DIVA_0 (0x00) /* ACLK Divider 0: /1 */
#define DIVA_1 (0x10) /* ACLK Divider 1: /2 */
#define DIVA_2 (0x20) /* ACLK Divider 2: /4 */
#define DIVA_3 (0x30) /* ACLK Divider 3: /8 */
#define DIVS0 (0x02) /* SMCLK Divider 0 */
#define DIVS1 (0x04) /* SMCLK Divider 1 */
#define SELS (0x08) /* SMCLK Source Select 0:DCOCLK / 1:XT2CLK/LFXTCLK */
#define DIVM0 (0x10) /* MCLK Divider 0 */
#define DIVM1 (0x20) /* MCLK Divider 1 */
#define SELM0 (0x40) /* MCLK Source Select 0 */
#define SELM1 (0x80) /* MCLK Source Select 1 */
#define DIVS_0 (0x00) /* SMCLK Divider 0: /1 */
#define DIVS_1 (0x02) /* SMCLK Divider 1: /2 */
#define DIVS_2 (0x04) /* SMCLK Divider 2: /4 */
#define DIVS_3 (0x06) /* SMCLK Divider 3: /8 */
#define DIVM_0 (0x00) /* MCLK Divider 0: /1 */
#define DIVM_1 (0x10) /* MCLK Divider 1: /2 */
#define DIVM_2 (0x20) /* MCLK Divider 2: /4 */
#define DIVM_3 (0x30) /* MCLK Divider 3: /8 */
#define SELM_0 (0x00) /* MCLK Source Select 0: DCOCLK */
#define SELM_1 (0x40) /* MCLK Source Select 1: DCOCLK */
#define SELM_2 (0x80) /* MCLK Source Select 2: XT2CLK/LFXTCLK */
#define SELM_3 (0xC0) /* MCLK Source Select 3: LFXTCLK */
#define LFXT1OF (0x01) /* Low/high Frequency Oscillator Fault Flag */
#define XT2OF (0x02) /* High frequency oscillator 2 fault flag */
#define XCAP0 (0x04) /* XIN/XOUT Cap 0 */
#define XCAP1 (0x08) /* XIN/XOUT Cap 1 */
#define LFXT1S0 (0x10) /* Mode 0 for LFXT1 (XTS = 0) */
#define LFXT1S1 (0x20) /* Mode 1 for LFXT1 (XTS = 0) */
#define XT2S0 (0x40) /* Mode 0 for XT2 */
#define XT2S1 (0x80) /* Mode 1 for XT2 */
#define XCAP_0 (0x00) /* XIN/XOUT Cap : 0 pF */
#define XCAP_1 (0x04) /* XIN/XOUT Cap : 6 pF */
#define XCAP_2 (0x08) /* XIN/XOUT Cap : 10 pF */
#define XCAP_3 (0x0C) /* XIN/XOUT Cap : 12.5 pF */
#define LFXT1S_0 (0x00) /* Mode 0 for LFXT1 : Normal operation */
#define LFXT1S_1 (0x10) /* Mode 1 for LFXT1 : Reserved */
#define LFXT1S_2 (0x20) /* Mode 2 for LFXT1 : VLO */
#define LFXT1S_3 (0x30) /* Mode 3 for LFXT1 : Digital input signal */
#define XT2S_0 (0x00) /* Mode 0 for XT2 : 0.4 - 1 MHz */
#define XT2S_1 (0x40) /* Mode 1 for XT2 : 1 - 4 MHz */
#define XT2S_2 (0x80) /* Mode 2 for XT2 : 2 - 16 MHz */
#define XT2S_3 (0xC0) /* Mode 3 for XT2 : Digital input signal */
/************************************************************
* Comparator A
************************************************************/
#define __MSP430_HAS_CAPLUS__ /* Definition to show that Module is available */
#define CACTL1_ 0x0059 /* Comparator A Control 1 */
sfrb(CACTL1, CACTL1_);
#define CACTL2_ 0x005A /* Comparator A Control 2 */
sfrb(CACTL2, CACTL2_);
#define CAPD_ 0x005B /* Comparator A Port Disable */
sfrb(CAPD, CAPD_);
#define CAIFG (0x01) /* Comp. A Interrupt Flag */
#define CAIE (0x02) /* Comp. A Interrupt Enable */
#define CAIES (0x04) /* Comp. A Int. Edge Select: 0:rising / 1:falling */
#define CAON (0x08) /* Comp. A enable */
#define CAREF0 (0x10) /* Comp. A Internal Reference Select 0 */
#define CAREF1 (0x20) /* Comp. A Internal Reference Select 1 */
#define CARSEL (0x40) /* Comp. A Internal Reference Enable */
#define CAEX (0x80) /* Comp. A Exchange Inputs */
#define CAREF_0 (0x00) /* Comp. A Int. Ref. Select 0 : Off */
#define CAREF_1 (0x10) /* Comp. A Int. Ref. Select 1 : 0.25*Vcc */
#define CAREF_2 (0x20) /* Comp. A Int. Ref. Select 2 : 0.5*Vcc */
#define CAREF_3 (0x30) /* Comp. A Int. Ref. Select 3 : Vt*/
#define CAOUT (0x01) /* Comp. A Output */
#define CAF (0x02) /* Comp. A Enable Output Filter */
#define P2CA0 (0x04) /* Comp. A +Terminal Multiplexer */
#define P2CA1 (0x08) /* Comp. A -Terminal Multiplexer */
#define P2CA2 (0x10) /* Comp. A -Terminal Multiplexer */
#define P2CA3 (0x20) /* Comp. A -Terminal Multiplexer */
#define P2CA4 (0x40) /* Comp. A +Terminal Multiplexer */
#define CASHORT (0x80) /* Comp. A Short + and - Terminals */
#define CAPD0 (0x01) /* Comp. A Disable Input Buffer of Port Register .0 */
#define CAPD1 (0x02) /* Comp. A Disable Input Buffer of Port Register .1 */
#define CAPD2 (0x04) /* Comp. A Disable Input Buffer of Port Register .2 */
#define CAPD3 (0x08) /* Comp. A Disable Input Buffer of Port Register .3 */
#define CAPD4 (0x10) /* Comp. A Disable Input Buffer of Port Register .4 */
#define CAPD5 (0x20) /* Comp. A Disable Input Buffer of Port Register .5 */
#define CAPD6 (0x40) /* Comp. A Disable Input Buffer of Port Register .6 */
#define CAPD7 (0x80) /* Comp. A Disable Input Buffer of Port Register .7 */
/*************************************************************
* Flash Memory
*************************************************************/
#define __MSP430_HAS_FLASH2__ /* Definition to show that Module is available */
#define FCTL1_ 0x0128 /* FLASH Control 1 */
sfrw(FCTL1, FCTL1_);
#define FCTL2_ 0x012A /* FLASH Control 2 */
sfrw(FCTL2, FCTL2_);
#define FCTL3_ 0x012C /* FLASH Control 3 */
sfrw(FCTL3, FCTL3_);
#define FRKEY (0x9600) /* Flash key returned by read */
#define FWKEY (0xA500) /* Flash key for write */
#define FXKEY (0x3300) /* for use with XOR instruction */
#define ERASE (0x0002) /* Enable bit for Flash segment erase */
#define MERAS (0x0004) /* Enable bit for Flash mass erase */
#define WRT (0x0040) /* Enable bit for Flash write */
#define BLKWRT (0x0080) /* Enable bit for Flash segment write */
#define SEGWRT (0x0080) /* old definition */ /* Enable bit for Flash segment write */
#define FN0 (0x0001) /* Divide Flash clock by 1 to 64 using FN0 to FN5 according to: */
#define FN1 (0x0002) /* 32*FN5 + 16*FN4 + 8*FN3 + 4*FN2 + 2*FN1 + FN0 + 1 */
#ifndef FN2
#define FN2 (0x0004)
#endif
#ifndef FN3
#define FN3 (0x0008)
#endif
#ifndef FN4
#define FN4 (0x0010)
#endif
#define FN5 (0x0020)
#define FSSEL0 (0x0040) /* Flash clock select 0 */ /* to distinguish from USART SSELx */
#define FSSEL1 (0x0080) /* Flash clock select 1 */
#define FSSEL_0 (0x0000) /* Flash clock select: 0 - ACLK */
#define FSSEL_1 (0x0040) /* Flash clock select: 1 - MCLK */
#define FSSEL_2 (0x0080) /* Flash clock select: 2 - SMCLK */
#define FSSEL_3 (0x00C0) /* Flash clock select: 3 - SMCLK */
#define BUSY (0x0001) /* Flash busy: 1 */
#define KEYV (0x0002) /* Flash Key violation flag */
#define ACCVIFG (0x0004) /* Flash Access violation flag */
#define WAIT (0x0008) /* Wait flag for segment write */
#define LOCK (0x0010) /* Lock bit: 1 - Flash is locked (read only) */
#define EMEX (0x0020) /* Flash Emergency Exit */
#define LOCKA (0x0040) /* Segment A Lock bit: read = 1 - Segment is locked (read only) */
#define FAIL (0x0080) /* Last Program or Erase failed */
/************************************************************
* DIGITAL I/O Port1/2 Pull up / Pull down Resistors
************************************************************/
#define __MSP430_HAS_PORT1_R__ /* Definition to show that Module is available */
#define __MSP430_HAS_PORT2_R__ /* Definition to show that Module is available */
#define P1IN_ 0x0020 /* Port 1 Input */
const_sfrb(P1IN, P1IN_);
#define P1OUT_ 0x0021 /* Port 1 Output */
sfrb(P1OUT, P1OUT_);
#define P1DIR_ 0x0022 /* Port 1 Direction */
sfrb(P1DIR, P1DIR_);
#define P1IFG_ 0x0023 /* Port 1 Interrupt Flag */
sfrb(P1IFG, P1IFG_);
#define P1IES_ 0x0024 /* Port 1 Interrupt Edge Select */
sfrb(P1IES, P1IES_);
#define P1IE_ 0x0025 /* Port 1 Interrupt Enable */
sfrb(P1IE, P1IE_);
#define P1SEL_ 0x0026 /* Port 1 Selection */
sfrb(P1SEL, P1SEL_);
#define P1SEL2_ 0x0041 /* Port 1 Selection 2 */
sfrb(P1SEL2, P1SEL2_);
#define P1REN_ 0x0027 /* Port 1 Resistor Enable */
sfrb(P1REN, P1REN_);
#define P2IN_ 0x0028 /* Port 2 Input */
const_sfrb(P2IN, P2IN_);
#define P2OUT_ 0x0029 /* Port 2 Output */
sfrb(P2OUT, P2OUT_);
#define P2DIR_ 0x002A /* Port 2 Direction */
sfrb(P2DIR, P2DIR_);
#define P2IFG_ 0x002B /* Port 2 Interrupt Flag */
sfrb(P2IFG, P2IFG_);
#define P2IES_ 0x002C /* Port 2 Interrupt Edge Select */
sfrb(P2IES, P2IES_);
#define P2IE_ 0x002D /* Port 2 Interrupt Enable */
sfrb(P2IE, P2IE_);
#define P2SEL_ 0x002E /* Port 2 Selection */
sfrb(P2SEL, P2SEL_);
#define P2SEL2_ 0x0042 /* Port 2 Selection 2 */
sfrb(P2SEL2, P2SEL2_);
#define P2REN_ 0x002F /* Port 2 Resistor Enable */
sfrb(P2REN, P2REN_);
/************************************************************
* DIGITAL I/O Port3 Pull up / Pull down Resistors
************************************************************/
#define __MSP430_HAS_PORT3_R__ /* Definition to show that Module is available */
#define P3IN_ 0x0018 /* Port 3 Input */
const_sfrb(P3IN, P3IN_);
#define P3OUT_ 0x0019 /* Port 3 Output */
sfrb(P3OUT, P3OUT_);
#define P3DIR_ 0x001A /* Port 3 Direction */
sfrb(P3DIR, P3DIR_);
#define P3SEL_ 0x001B /* Port 3 Selection */
sfrb(P3SEL, P3SEL_);
#define P3SEL2_ 0x0043 /* Port 3 Selection 2 */
sfrb(P3SEL2, P3SEL2_);
#define P3REN_ 0x0010 /* Port 3 Resistor Enable */
sfrb(P3REN, P3REN_);
/************************************************************
* Timer0_A3
************************************************************/
#define __MSP430_HAS_TA3__ /* Definition to show that Module is available */
#define TA0IV_ 0x012E /* Timer0_A3 Interrupt Vector Word */
const_sfrw(TA0IV, TA0IV_);
#define TA0CTL_ 0x0160 /* Timer0_A3 Control */
sfrw(TA0CTL, TA0CTL_);
#define TA0CCTL0_ 0x0162 /* Timer0_A3 Capture/Compare Control 0 */
sfrw(TA0CCTL0, TA0CCTL0_);
#define TA0CCTL1_ 0x0164 /* Timer0_A3 Capture/Compare Control 1 */
sfrw(TA0CCTL1, TA0CCTL1_);
#define TA0CCTL2_ 0x0166 /* Timer0_A3 Capture/Compare Control 2 */
sfrw(TA0CCTL2, TA0CCTL2_);
#define TA0R_ 0x0170 /* Timer0_A3 */
sfrw(TA0R, TA0R_);
#define TA0CCR0_ 0x0172 /* Timer0_A3 Capture/Compare 0 */
sfrw(TA0CCR0, TA0CCR0_);
#define TA0CCR1_ 0x0174 /* Timer0_A3 Capture/Compare 1 */
sfrw(TA0CCR1, TA0CCR1_);
#define TA0CCR2_ 0x0176 /* Timer0_A3 Capture/Compare 2 */
sfrw(TA0CCR2, TA0CCR2_);
/* Alternate register names */
#define TAIV TA0IV /* Timer A Interrupt Vector Word */
#define TACTL TA0CTL /* Timer A Control */
#define TACCTL0 TA0CCTL0 /* Timer A Capture/Compare Control 0 */
#define TACCTL1 TA0CCTL1 /* Timer A Capture/Compare Control 1 */
#define TACCTL2 TA0CCTL2 /* Timer A Capture/Compare Control 2 */
#define TAR TA0R /* Timer A */
#define TACCR0 TA0CCR0 /* Timer A Capture/Compare 0 */
#define TACCR1 TA0CCR1 /* Timer A Capture/Compare 1 */
#define TACCR2 TA0CCR2 /* Timer A Capture/Compare 2 */
#define TAIV_ TA0IV_ /* Timer A Interrupt Vector Word */
#define TACTL_ TA0CTL_ /* Timer A Control */
#define TACCTL0_ TA0CCTL0_ /* Timer A Capture/Compare Control 0 */
#define TACCTL1_ TA0CCTL1_ /* Timer A Capture/Compare Control 1 */
#define TACCTL2_ TA0CCTL2_ /* Timer A Capture/Compare Control 2 */
#define TAR_ TA0R_ /* Timer A */
#define TACCR0_ TA0CCR0_ /* Timer A Capture/Compare 0 */
#define TACCR1_ TA0CCR1_ /* Timer A Capture/Compare 1 */
#define TACCR2_ TA0CCR2_ /* Timer A Capture/Compare 2 */
/* Alternate register names 2 */
#define CCTL0 TACCTL0 /* Timer A Capture/Compare Control 0 */
#define CCTL1 TACCTL1 /* Timer A Capture/Compare Control 1 */
#define CCTL2 TACCTL2 /* Timer A Capture/Compare Control 2 */
#define CCR0 TACCR0 /* Timer A Capture/Compare 0 */
#define CCR1 TACCR1 /* Timer A Capture/Compare 1 */
#define CCR2 TACCR2 /* Timer A Capture/Compare 2 */
#define CCTL0_ TACCTL0_ /* Timer A Capture/Compare Control 0 */
#define CCTL1_ TACCTL1_ /* Timer A Capture/Compare Control 1 */
#define CCTL2_ TACCTL2_ /* Timer A Capture/Compare Control 2 */
#define CCR0_ TACCR0_ /* Timer A Capture/Compare 0 */
#define CCR1_ TACCR1_ /* Timer A Capture/Compare 1 */
#define CCR2_ TACCR2_ /* Timer A Capture/Compare 2 */
#define TASSEL1 (0x0200) /* Timer A clock source select 1 */
#define TASSEL0 (0x0100) /* Timer A clock source select 0 */
#define ID1 (0x0080) /* Timer A clock input divider 1 */
#define ID0 (0x0040) /* Timer A clock input divider 0 */
#define MC1 (0x0020) /* Timer A mode control 1 */
#define MC0 (0x0010) /* Timer A mode control 0 */
#define TACLR (0x0004) /* Timer A counter clear */
#define TAIE (0x0002) /* Timer A counter interrupt enable */
#define TAIFG (0x0001) /* Timer A counter interrupt flag */
#define MC_0 (0x0000) /* Timer A mode control: 0 - Stop */
#define MC_1 (0x0010) /* Timer A mode control: 1 - Up to CCR0 */
#define MC_2 (0x0020) /* Timer A mode control: 2 - Continous up */
#define MC_3 (0x0030) /* Timer A mode control: 3 - Up/Down */
#define ID_0 (0x0000) /* Timer A input divider: 0 - /1 */
#define ID_1 (0x0040) /* Timer A input divider: 1 - /2 */
#define ID_2 (0x0080) /* Timer A input divider: 2 - /4 */
#define ID_3 (0x00C0) /* Timer A input divider: 3 - /8 */
#define TASSEL_0 (0x0000) /* Timer A clock source select: 0 - TACLK */
#define TASSEL_1 (0x0100) /* Timer A clock source select: 1 - ACLK */
#define TASSEL_2 (0x0200) /* Timer A clock source select: 2 - SMCLK */
#define TASSEL_3 (0x0300) /* Timer A clock source select: 3 - INCLK */
#define CM1 (0x8000) /* Capture mode 1 */
#define CM0 (0x4000) /* Capture mode 0 */
#define CCIS1 (0x2000) /* Capture input select 1 */
#define CCIS0 (0x1000) /* Capture input select 0 */
#define SCS (0x0800) /* Capture sychronize */
#define SCCI (0x0400) /* Latched capture signal (read) */
#define CAP (0x0100) /* Capture mode: 1 /Compare mode : 0 */
#define OUTMOD2 (0x0080) /* Output mode 2 */
#define OUTMOD1 (0x0040) /* Output mode 1 */
#define OUTMOD0 (0x0020) /* Output mode 0 */
#define CCIE (0x0010) /* Capture/compare interrupt enable */
#define CCI (0x0008) /* Capture input signal (read) */
#define OUT (0x0004) /* PWM Output signal if output mode 0 */
#define COV (0x0002) /* Capture/compare overflow flag */
#define CCIFG (0x0001) /* Capture/compare interrupt flag */
#define OUTMOD_0 (0x0000) /* PWM output mode: 0 - output only */
#define OUTMOD_1 (0x0020) /* PWM output mode: 1 - set */
#define OUTMOD_2 (0x0040) /* PWM output mode: 2 - PWM toggle/reset */
#define OUTMOD_3 (0x0060) /* PWM output mode: 3 - PWM set/reset */
#define OUTMOD_4 (0x0080) /* PWM output mode: 4 - toggle */
#define OUTMOD_5 (0x00A0) /* PWM output mode: 5 - Reset */
#define OUTMOD_6 (0x00C0) /* PWM output mode: 6 - PWM toggle/set */
#define OUTMOD_7 (0x00E0) /* PWM output mode: 7 - PWM reset/set */
#define CCIS_0 (0x0000) /* Capture input select: 0 - CCIxA */
#define CCIS_1 (0x1000) /* Capture input select: 1 - CCIxB */
#define CCIS_2 (0x2000) /* Capture input select: 2 - GND */
#define CCIS_3 (0x3000) /* Capture input select: 3 - Vcc */
#define CM_0 (0x0000) /* Capture mode: 0 - disabled */
#define CM_1 (0x4000) /* Capture mode: 1 - pos. edge */
#define CM_2 (0x8000) /* Capture mode: 1 - neg. edge */
#define CM_3 (0xC000) /* Capture mode: 1 - both edges */
/* T0_A3IV Definitions */
#define TA0IV_NONE (0x0000) /* No Interrupt pending */
#define TA0IV_TACCR1 (0x0002) /* TA0CCR1_CCIFG */
#define TA0IV_TACCR2 (0x0004) /* TA0CCR2_CCIFG */
#define TA0IV_6 (0x0006) /* Reserved */
#define TA0IV_8 (0x0008) /* Reserved */
#define TA0IV_TAIFG (0x000A) /* TA0IFG */
/************************************************************
* Timer1_A3
************************************************************/
#define __MSP430_HAS_T1A3__ /* Definition to show that Module is available */
#define TA1IV_ 0x011E /* Timer1_A3 Interrupt Vector Word */
const_sfrw(TA1IV, TA1IV_);
#define TA1CTL_ 0x0180 /* Timer1_A3 Control */
sfrw(TA1CTL, TA1CTL_);
#define TA1CCTL0_ 0x0182 /* Timer1_A3 Capture/Compare Control 0 */
sfrw(TA1CCTL0, TA1CCTL0_);
#define TA1CCTL1_ 0x0184 /* Timer1_A3 Capture/Compare Control 1 */
sfrw(TA1CCTL1, TA1CCTL1_);
#define TA1CCTL2_ 0x0186 /* Timer1_A3 Capture/Compare Control 2 */
sfrw(TA1CCTL2, TA1CCTL2_);
#define TA1R_ 0x0190 /* Timer1_A3 */
sfrw(TA1R, TA1R_);
#define TA1CCR0_ 0x0192 /* Timer1_A3 Capture/Compare 0 */
sfrw(TA1CCR0, TA1CCR0_);
#define TA1CCR1_ 0x0194 /* Timer1_A3 Capture/Compare 1 */
sfrw(TA1CCR1, TA1CCR1_);
#define TA1CCR2_ 0x0196 /* Timer1_A3 Capture/Compare 2 */
sfrw(TA1CCR2, TA1CCR2_);
/* Bits are already defined within the Timer0_Ax */
/* T1_A3IV Definitions */
#define TA1IV_NONE (0x0000) /* No Interrupt pending */
#define TA1IV_TACCR1 (0x0002) /* TA1CCR1_CCIFG */
#define TA1IV_TACCR2 (0x0004) /* TA1CCR2_CCIFG */
#define TA1IV_TAIFG (0x000A) /* TA1IFG */
/************************************************************
* USCI
************************************************************/
#define __MSP430_HAS_USCI__ /* Definition to show that Module is available */
#define UCA0CTL0_ 0x0060 /* USCI A0 Control Register 0 */
sfrb(UCA0CTL0, UCA0CTL0_);
#define UCA0CTL1_ 0x0061 /* USCI A0 Control Register 1 */
sfrb(UCA0CTL1, UCA0CTL1_);
#define UCA0BR0_ 0x0062 /* USCI A0 Baud Rate 0 */
sfrb(UCA0BR0, UCA0BR0_);
#define UCA0BR1_ 0x0063 /* USCI A0 Baud Rate 1 */
sfrb(UCA0BR1, UCA0BR1_);
#define UCA0MCTL_ 0x0064 /* USCI A0 Modulation Control */
sfrb(UCA0MCTL, UCA0MCTL_);
#define UCA0STAT_ 0x0065 /* USCI A0 Status Register */
sfrb(UCA0STAT, UCA0STAT_);
#define UCA0RXBUF_ 0x0066 /* USCI A0 Receive Buffer */
const_sfrb(UCA0RXBUF, UCA0RXBUF_);
#define UCA0TXBUF_ 0x0067 /* USCI A0 Transmit Buffer */
sfrb(UCA0TXBUF, UCA0TXBUF_);
#define UCA0ABCTL_ 0x005D /* USCI A0 LIN Control */
sfrb(UCA0ABCTL, UCA0ABCTL_);
#define UCA0IRTCTL_ 0x005E /* USCI A0 IrDA Transmit Control */
sfrb(UCA0IRTCTL, UCA0IRTCTL_);
#define UCA0IRRCTL_ 0x005F /* USCI A0 IrDA Receive Control */
sfrb(UCA0IRRCTL, UCA0IRRCTL_);
#define UCB0CTL0_ 0x0068 /* USCI B0 Control Register 0 */
sfrb(UCB0CTL0, UCB0CTL0_);
#define UCB0CTL1_ 0x0069 /* USCI B0 Control Register 1 */
sfrb(UCB0CTL1, UCB0CTL1_);
#define UCB0BR0_ 0x006A /* USCI B0 Baud Rate 0 */
sfrb(UCB0BR0, UCB0BR0_);
#define UCB0BR1_ 0x006B /* USCI B0 Baud Rate 1 */
sfrb(UCB0BR1, UCB0BR1_);
#define UCB0I2CIE_ 0x006C /* USCI B0 I2C Interrupt Enable Register */
sfrb(UCB0I2CIE, UCB0I2CIE_);
#define UCB0STAT_ 0x006D /* USCI B0 Status Register */
sfrb(UCB0STAT, UCB0STAT_);
#define UCB0RXBUF_ 0x006E /* USCI B0 Receive Buffer */
const_sfrb(UCB0RXBUF, UCB0RXBUF_);
#define UCB0TXBUF_ 0x006F /* USCI B0 Transmit Buffer */
sfrb(UCB0TXBUF, UCB0TXBUF_);
#define UCB0I2COA_ 0x0118 /* USCI B0 I2C Own Address */
sfrw(UCB0I2COA, UCB0I2COA_);
#define UCB0I2CSA_ 0x011A /* USCI B0 I2C Slave Address */
sfrw(UCB0I2CSA, UCB0I2CSA_);
// UART-Mode Bits
#define UCPEN (0x80) /* Async. Mode: Parity enable */
#define UCPAR (0x40) /* Async. Mode: Parity 0:odd / 1:even */
#define UCMSB (0x20) /* Async. Mode: MSB first 0:LSB / 1:MSB */
#define UC7BIT (0x10) /* Async. Mode: Data Bits 0:8-bits / 1:7-bits */
#define UCSPB (0x08) /* Async. Mode: Stop Bits 0:one / 1: two */
#define UCMODE1 (0x04) /* Async. Mode: USCI Mode 1 */
#define UCMODE0 (0x02) /* Async. Mode: USCI Mode 0 */
#define UCSYNC (0x01) /* Sync-Mode 0:UART-Mode / 1:SPI-Mode */
// SPI-Mode Bits
#define UCCKPH (0x80) /* Sync. Mode: Clock Phase */
#define UCCKPL (0x40) /* Sync. Mode: Clock Polarity */
#define UCMST (0x08) /* Sync. Mode: Master Select */
// I2C-Mode Bits
#define UCA10 (0x80) /* 10-bit Address Mode */
#define UCSLA10 (0x40) /* 10-bit Slave Address Mode */
#define UCMM (0x20) /* Multi-Master Environment */
//#define res (0x10) /* reserved */
#define UCMODE_0 (0x00) /* Sync. Mode: USCI Mode: 0 */
#define UCMODE_1 (0x02) /* Sync. Mode: USCI Mode: 1 */
#define UCMODE_2 (0x04) /* Sync. Mode: USCI Mode: 2 */
#define UCMODE_3 (0x06) /* Sync. Mode: USCI Mode: 3 */
// UART-Mode Bits
#define UCSSEL1 (0x80) /* USCI 0 Clock Source Select 1 */
#define UCSSEL0 (0x40) /* USCI 0 Clock Source Select 0 */
#define UCRXEIE (0x20) /* RX Error interrupt enable */
#define UCBRKIE (0x10) /* Break interrupt enable */
#define UCDORM (0x08) /* Dormant (Sleep) Mode */
#define UCTXADDR (0x04) /* Send next Data as Address */
#define UCTXBRK (0x02) /* Send next Data as Break */
#define UCSWRST (0x01) /* USCI Software Reset */
// SPI-Mode Bits
//#define res (0x20) /* reserved */
//#define res (0x10) /* reserved */
//#define res (0x08) /* reserved */
//#define res (0x04) /* reserved */
//#define res (0x02) /* reserved */
// I2C-Mode Bits
//#define res (0x20) /* reserved */
#define UCTR (0x10) /* Transmit/Receive Select/Flag */
#define UCTXNACK (0x08) /* Transmit NACK */
#define UCTXSTP (0x04) /* Transmit STOP */
#define UCTXSTT (0x02) /* Transmit START */
#define UCSSEL_0 (0x00) /* USCI 0 Clock Source: 0 */
#define UCSSEL_1 (0x40) /* USCI 0 Clock Source: 1 */
#define UCSSEL_2 (0x80) /* USCI 0 Clock Source: 2 */
#define UCSSEL_3 (0xC0) /* USCI 0 Clock Source: 3 */
#define UCBRF3 (0x80) /* USCI First Stage Modulation Select 3 */
#define UCBRF2 (0x40) /* USCI First Stage Modulation Select 2 */
#define UCBRF1 (0x20) /* USCI First Stage Modulation Select 1 */
#define UCBRF0 (0x10) /* USCI First Stage Modulation Select 0 */
#define UCBRS2 (0x08) /* USCI Second Stage Modulation Select 2 */
#define UCBRS1 (0x04) /* USCI Second Stage Modulation Select 1 */
#define UCBRS0 (0x02) /* USCI Second Stage Modulation Select 0 */
#define UCOS16 (0x01) /* USCI 16-times Oversampling enable */
#define UCBRF_0 (0x00) /* USCI First Stage Modulation: 0 */
#define UCBRF_1 (0x10) /* USCI First Stage Modulation: 1 */
#define UCBRF_2 (0x20) /* USCI First Stage Modulation: 2 */
#define UCBRF_3 (0x30) /* USCI First Stage Modulation: 3 */
#define UCBRF_4 (0x40) /* USCI First Stage Modulation: 4 */
#define UCBRF_5 (0x50) /* USCI First Stage Modulation: 5 */
#define UCBRF_6 (0x60) /* USCI First Stage Modulation: 6 */
#define UCBRF_7 (0x70) /* USCI First Stage Modulation: 7 */
#define UCBRF_8 (0x80) /* USCI First Stage Modulation: 8 */
#define UCBRF_9 (0x90) /* USCI First Stage Modulation: 9 */
#define UCBRF_10 (0xA0) /* USCI First Stage Modulation: A */
#define UCBRF_11 (0xB0) /* USCI First Stage Modulation: B */
#define UCBRF_12 (0xC0) /* USCI First Stage Modulation: C */
#define UCBRF_13 (0xD0) /* USCI First Stage Modulation: D */
#define UCBRF_14 (0xE0) /* USCI First Stage Modulation: E */
#define UCBRF_15 (0xF0) /* USCI First Stage Modulation: F */
#define UCBRS_0 (0x00) /* USCI Second Stage Modulation: 0 */
#define UCBRS_1 (0x02) /* USCI Second Stage Modulation: 1 */
#define UCBRS_2 (0x04) /* USCI Second Stage Modulation: 2 */
#define UCBRS_3 (0x06) /* USCI Second Stage Modulation: 3 */
#define UCBRS_4 (0x08) /* USCI Second Stage Modulation: 4 */
#define UCBRS_5 (0x0A) /* USCI Second Stage Modulation: 5 */
#define UCBRS_6 (0x0C) /* USCI Second Stage Modulation: 6 */
#define UCBRS_7 (0x0E) /* USCI Second Stage Modulation: 7 */
#define UCLISTEN (0x80) /* USCI Listen mode */
#define UCFE (0x40) /* USCI Frame Error Flag */
#define UCOE (0x20) /* USCI Overrun Error Flag */
#define UCPE (0x10) /* USCI Parity Error Flag */
#define UCBRK (0x08) /* USCI Break received */
#define UCRXERR (0x04) /* USCI RX Error Flag */
#define UCADDR (0x02) /* USCI Address received Flag */
#define UCBUSY (0x01) /* USCI Busy Flag */
#define UCIDLE (0x02) /* USCI Idle line detected Flag */
//#define res (0x80) /* reserved */
//#define res (0x40) /* reserved */
//#define res (0x20) /* reserved */
//#define res (0x10) /* reserved */
#define UCNACKIE (0x08) /* NACK Condition interrupt enable */
#define UCSTPIE (0x04) /* STOP Condition interrupt enable */
#define UCSTTIE (0x02) /* START Condition interrupt enable */
#define UCALIE (0x01) /* Arbitration Lost interrupt enable */
#define UCSCLLOW (0x40) /* SCL low */
#define UCGC (0x20) /* General Call address received Flag */
#define UCBBUSY (0x10) /* Bus Busy Flag */
#define UCNACKIFG (0x08) /* NAK Condition interrupt Flag */
#define UCSTPIFG (0x04) /* STOP Condition interrupt Flag */
#define UCSTTIFG (0x02) /* START Condition interrupt Flag */
#define UCALIFG (0x01) /* Arbitration Lost interrupt Flag */
#define UCIRTXPL5 (0x80) /* IRDA Transmit Pulse Length 5 */
#define UCIRTXPL4 (0x40) /* IRDA Transmit Pulse Length 4 */
#define UCIRTXPL3 (0x20) /* IRDA Transmit Pulse Length 3 */
#define UCIRTXPL2 (0x10) /* IRDA Transmit Pulse Length 2 */
#define UCIRTXPL1 (0x08) /* IRDA Transmit Pulse Length 1 */
#define UCIRTXPL0 (0x04) /* IRDA Transmit Pulse Length 0 */
#define UCIRTXCLK (0x02) /* IRDA Transmit Pulse Clock Select */
#define UCIREN (0x01) /* IRDA Encoder/Decoder enable */
#define UCIRRXFL5 (0x80) /* IRDA Receive Filter Length 5 */
#define UCIRRXFL4 (0x40) /* IRDA Receive Filter Length 4 */
#define UCIRRXFL3 (0x20) /* IRDA Receive Filter Length 3 */
#define UCIRRXFL2 (0x10) /* IRDA Receive Filter Length 2 */
#define UCIRRXFL1 (0x08) /* IRDA Receive Filter Length 1 */
#define UCIRRXFL0 (0x04) /* IRDA Receive Filter Length 0 */
#define UCIRRXPL (0x02) /* IRDA Receive Input Polarity */
#define UCIRRXFE (0x01) /* IRDA Receive Filter enable */
//#define res (0x80) /* reserved */
//#define res (0x40) /* reserved */
#define UCDELIM1 (0x20) /* Break Sync Delimiter 1 */
#define UCDELIM0 (0x10) /* Break Sync Delimiter 0 */
#define UCSTOE (0x08) /* Sync-Field Timeout error */
#define UCBTOE (0x04) /* Break Timeout error */
//#define res (0x02) /* reserved */
#define UCABDEN (0x01) /* Auto Baud Rate detect enable */
#define UCGCEN (0x8000) /* I2C General Call enable */
#define UCOA9 (0x0200) /* I2C Own Address 9 */
#define UCOA8 (0x0100) /* I2C Own Address 8 */
#define UCOA7 (0x0080) /* I2C Own Address 7 */
#define UCOA6 (0x0040) /* I2C Own Address 6 */
#define UCOA5 (0x0020) /* I2C Own Address 5 */
#define UCOA4 (0x0010) /* I2C Own Address 4 */
#define UCOA3 (0x0008) /* I2C Own Address 3 */
#define UCOA2 (0x0004) /* I2C Own Address 2 */
#define UCOA1 (0x0002) /* I2C Own Address 1 */
#define UCOA0 (0x0001) /* I2C Own Address 0 */
#define UCSA9 (0x0200) /* I2C Slave Address 9 */
#define UCSA8 (0x0100) /* I2C Slave Address 8 */
#define UCSA7 (0x0080) /* I2C Slave Address 7 */
#define UCSA6 (0x0040) /* I2C Slave Address 6 */
#define UCSA5 (0x0020) /* I2C Slave Address 5 */
#define UCSA4 (0x0010) /* I2C Slave Address 4 */
#define UCSA3 (0x0008) /* I2C Slave Address 3 */
#define UCSA2 (0x0004) /* I2C Slave Address 2 */
#define UCSA1 (0x0002) /* I2C Slave Address 1 */
#define UCSA0 (0x0001) /* I2C Slave Address 0 */
/************************************************************
* WATCHDOG TIMER
************************************************************/
#define __MSP430_HAS_WDT__ /* Definition to show that Module is available */
#define WDTCTL_ 0x0120 /* Watchdog Timer Control */
sfrw(WDTCTL, WDTCTL_);
/* The bit names have been prefixed with "WDT" */
#define WDTIS0 (0x0001)
#define WDTIS1 (0x0002)
#define WDTSSEL (0x0004)
#define WDTCNTCL (0x0008)
#define WDTTMSEL (0x0010)
#define WDTNMI (0x0020)
#define WDTNMIES (0x0040)
#define WDTHOLD (0x0080)
#define WDTPW (0x5A00)
/* WDT-interval times [1ms] coded with Bits 0-2 */
/* WDT is clocked by fSMCLK (assumed 1MHz) */
#define WDT_MDLY_32 (WDTPW+WDTTMSEL+WDTCNTCL) /* 32ms interval (default) */
#define WDT_MDLY_8 (WDTPW+WDTTMSEL+WDTCNTCL+WDTIS0) /* 8ms " */
#define WDT_MDLY_0_5 (WDTPW+WDTTMSEL+WDTCNTCL+WDTIS1) /* 0.5ms " */
#define WDT_MDLY_0_064 (WDTPW+WDTTMSEL+WDTCNTCL+WDTIS1+WDTIS0) /* 0.064ms " */
/* WDT is clocked by fACLK (assumed 32KHz) */
#define WDT_ADLY_1000 (WDTPW+WDTTMSEL+WDTCNTCL+WDTSSEL) /* 1000ms " */
#define WDT_ADLY_250 (WDTPW+WDTTMSEL+WDTCNTCL+WDTSSEL+WDTIS0) /* 250ms " */
#define WDT_ADLY_16 (WDTPW+WDTTMSEL+WDTCNTCL+WDTSSEL+WDTIS1) /* 16ms " */
#define WDT_ADLY_1_9 (WDTPW+WDTTMSEL+WDTCNTCL+WDTSSEL+WDTIS1+WDTIS0) /* 1.9ms " */
/* Watchdog mode -> reset after expired time */
/* WDT is clocked by fSMCLK (assumed 1MHz) */
#define WDT_MRST_32 (WDTPW+WDTCNTCL) /* 32ms interval (default) */
#define WDT_MRST_8 (WDTPW+WDTCNTCL+WDTIS0) /* 8ms " */
#define WDT_MRST_0_5 (WDTPW+WDTCNTCL+WDTIS1) /* 0.5ms " */
#define WDT_MRST_0_064 (WDTPW+WDTCNTCL+WDTIS1+WDTIS0) /* 0.064ms " */
/* WDT is clocked by fACLK (assumed 32KHz) */
#define WDT_ARST_1000 (WDTPW+WDTCNTCL+WDTSSEL) /* 1000ms " */
#define WDT_ARST_250 (WDTPW+WDTCNTCL+WDTSSEL+WDTIS0) /* 250ms " */
#define WDT_ARST_16 (WDTPW+WDTCNTCL+WDTSSEL+WDTIS1) /* 16ms " */
#define WDT_ARST_1_9 (WDTPW+WDTCNTCL+WDTSSEL+WDTIS1+WDTIS0) /* 1.9ms " */
/* INTERRUPT CONTROL */
/* These two bits are defined in the Special Function Registers */
/* #define WDTIE 0x01 */
/* #define WDTIFG 0x01 */
/************************************************************
* Calibration Data in Info Mem
************************************************************/
#ifndef __DisableCalData
#define CALDCO_16MHZ_ 0x10F8 /* DCOCTL Calibration Data for 16MHz */
const_sfrb(CALDCO_16MHZ, CALDCO_16MHZ_);
#define CALBC1_16MHZ_ 0x10F9 /* BCSCTL1 Calibration Data for 16MHz */
const_sfrb(CALBC1_16MHZ, CALBC1_16MHZ_);
#define CALDCO_12MHZ_ 0x10FA /* DCOCTL Calibration Data for 12MHz */
const_sfrb(CALDCO_12MHZ, CALDCO_12MHZ_);
#define CALBC1_12MHZ_ 0x10FB /* BCSCTL1 Calibration Data for 12MHz */
const_sfrb(CALBC1_12MHZ, CALBC1_12MHZ_);
#define CALDCO_8MHZ_ 0x10FC /* DCOCTL Calibration Data for 8MHz */
const_sfrb(CALDCO_8MHZ, CALDCO_8MHZ_);
#define CALBC1_8MHZ_ 0x10FD /* BCSCTL1 Calibration Data for 8MHz */
const_sfrb(CALBC1_8MHZ, CALBC1_8MHZ_);
#define CALDCO_1MHZ_ 0x10FE /* DCOCTL Calibration Data for 1MHz */
const_sfrb(CALDCO_1MHZ, CALDCO_1MHZ_);
#define CALBC1_1MHZ_ 0x10FF /* BCSCTL1 Calibration Data for 1MHz */
const_sfrb(CALBC1_1MHZ, CALBC1_1MHZ_);
#endif /* #ifndef __DisableCalData */
/************************************************************
* Interrupt Vectors (offset from 0xFFE0)
************************************************************/
#define PORT1_VECTOR (0x0004) /* 0xFFE4 Port 1 */
#define PORT2_VECTOR (0x0006) /* 0xFFE6 Port 2 */
#define ADC10_VECTOR (0x000A) /* 0xFFEA ADC10 */
#define USCIAB0TX_VECTOR (0x000C) /* 0xFFEC USCI A0/B0 Transmit */
#define USCIAB0RX_VECTOR (0x000E) /* 0xFFEE USCI A0/B0 Receive */
#define TIMER0_A1_VECTOR (0x0010) /* 0xFFF0 Timer0)A CC1, TA0 */
#define TIMER0_A0_VECTOR (0x0012) /* 0xFFF2 Timer0_A CC0 */
#define WDT_VECTOR (0x0014) /* 0xFFF4 Watchdog Timer */
#define COMPARATORA_VECTOR (0x0016) /* 0xFFF6 Comparator A */
#define TIMER1_A1_VECTOR (0x0018) /* 0xFFF8 Timer1_A CC1-4, TA1 */
#define TIMER1_A0_VECTOR (0x001A) /* 0xFFFA Timer1_A CC0 */
#define NMI_VECTOR (0x001C) /* 0xFFFC Non-maskable */
#define RESET_VECTOR (0x001E) /* 0xFFFE Reset [Highest Priority] */
/************************************************************
* End of Modules
************************************************************/
#ifdef __cplusplus
}
#endif /* extern "C" */
#endif /* #ifndef __MSP430G2253 */
|