/usr/msp430/include/msp430p315s.h is in msp430mcu 20120406-2.
This file is owned by root:root, with mode 0o644.
The actual contents of the file can be viewed below.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 | /* ============================================================================ */
/* Copyright (c) 2012, Texas Instruments Incorporated */
/* All rights reserved. */
/* */
/* Redistribution and use in source and binary forms, with or without */
/* modification, are permitted provided that the following conditions */
/* are met: */
/* */
/* * Redistributions of source code must retain the above copyright */
/* notice, this list of conditions and the following disclaimer. */
/* */
/* * Redistributions in binary form must reproduce the above copyright */
/* notice, this list of conditions and the following disclaimer in the */
/* documentation and/or other materials provided with the distribution. */
/* */
/* * Neither the name of Texas Instruments Incorporated nor the names of */
/* its contributors may be used to endorse or promote products derived */
/* from this software without specific prior written permission. */
/* */
/* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" */
/* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, */
/* THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR */
/* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR */
/* CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, */
/* EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, */
/* PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; */
/* OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, */
/* WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR */
/* OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, */
/* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */
/* ============================================================================ */
/********************************************************************
*
* Standard register and bit definitions for the Texas Instruments
* MSP430 microcontroller.
*
* This file supports assembler and C development for
* MSP430x31x devices.
*
* Texas Instruments, Version 2.2
*
* Rev. 1.1, Changed definition of LPM4 bits (device effect not changed)
* Corrected LPMx_EXIT to reference new intrinsic _BIC_SR_IRQ
* The file contents were reordered
* Rev. 1.2, Enclose all #define statements with parentheses
* Rev. 1.3, Added sfrb for TCDAT and TCPLD
* Rev. 1.4, Removed incorrect label 'BTRESET'
* Rev. 2.1, Alignment of defintions in Users Guide and of version numbers
* Rev. 2.2, Removed definitions for BTRESET
*
********************************************************************/
#ifndef __msp430x31x
#define __msp430x31x
#define __MSP430_HEADER_VERSION__ 1064
#define __MSP430_TI_HEADERS__
#ifdef __cplusplus
extern "C" {
#endif
#include <iomacros.h>
/************************************************************
* STANDARD BITS
************************************************************/
#define BIT0 (0x0001)
#define BIT1 (0x0002)
#define BIT2 (0x0004)
#define BIT3 (0x0008)
#define BIT4 (0x0010)
#define BIT5 (0x0020)
#define BIT6 (0x0040)
#define BIT7 (0x0080)
#define BIT8 (0x0100)
#define BIT9 (0x0200)
#define BITA (0x0400)
#define BITB (0x0800)
#define BITC (0x1000)
#define BITD (0x2000)
#define BITE (0x4000)
#define BITF (0x8000)
/************************************************************
* STATUS REGISTER BITS
************************************************************/
#define C (0x0001)
#define Z (0x0002)
#define N (0x0004)
#define V (0x0100)
#define GIE (0x0008)
#define CPUOFF (0x0010)
#define OSCOFF (0x0020)
#define SCG0 (0x0040)
#define SCG1 (0x0080)
/* Low Power Modes coded with Bits 4-7 in SR */
#ifndef __STDC__ /* Begin #defines for assembler */
#define LPM0 (CPUOFF)
#define LPM1 (SCG0+CPUOFF)
#define LPM2 (SCG1+CPUOFF)
#define LPM3 (SCG1+SCG0+CPUOFF)
#define LPM4 (SCG1+SCG0+OSCOFF+CPUOFF)
/* End #defines for assembler */
#else /* Begin #defines for C */
#define LPM0_bits (CPUOFF)
#define LPM1_bits (SCG0+CPUOFF)
#define LPM2_bits (SCG1+CPUOFF)
#define LPM3_bits (SCG1+SCG0+CPUOFF)
#define LPM4_bits (SCG1+SCG0+OSCOFF+CPUOFF)
#include "in430.h"
#define LPM0 _BIS_SR(LPM0_bits) /* Enter Low Power Mode 0 */
#define LPM0_EXIT _BIC_SR_IRQ(LPM0_bits) /* Exit Low Power Mode 0 */
#define LPM1 _BIS_SR(LPM1_bits) /* Enter Low Power Mode 1 */
#define LPM1_EXIT _BIC_SR_IRQ(LPM1_bits) /* Exit Low Power Mode 1 */
#define LPM2 _BIS_SR(LPM2_bits) /* Enter Low Power Mode 2 */
#define LPM2_EXIT _BIC_SR_IRQ(LPM2_bits) /* Exit Low Power Mode 2 */
#define LPM3 _BIS_SR(LPM3_bits) /* Enter Low Power Mode 3 */
#define LPM3_EXIT _BIC_SR_IRQ(LPM3_bits) /* Exit Low Power Mode 3 */
#define LPM4 _BIS_SR(LPM4_bits) /* Enter Low Power Mode 4 */
#define LPM4_EXIT _BIC_SR_IRQ(LPM4_bits) /* Exit Low Power Mode 4 */
#endif /* End #defines for C */
/************************************************************
* PERIPHERAL FILE MAP
************************************************************/
/************************************************************
* SPECIAL FUNCTION REGISTER ADDRESSES + CONTROL BITS
************************************************************/
#define IE1_ 0x0000 /* Interrupt Enable 1 */
sfrb(IE1, IE1_);
#define WDTIE (0x01)
#define OFIE (0x02)
#define P0IE_0 (0x04)
#define P0IE_1 (0x08)
#define IFG1_ 0x0002 /* Interrupt Flag 1 */
sfrb(IFG1, IFG1_);
#define WDTIFG (0x01)
#define OFIFG (0x02)
#define P0IFG_0 (0x04)
#define P0IFG_1 (0x08)
#define NMIIFG (0x10)
#define IE2_ 0x0001 /* Interrupt Enable 2 */
sfrb(IE2, IE2_);
#define TPIE (0x04)
#define BTIE (0x80)
#define IFG2_ 0x0003 /* Interrupt Flag 2 */
sfrb(IFG2, IFG2_);
#define BTIFG (0x80)
/************************************************************
* WATCHDOG TIMER
************************************************************/
#define __MSP430_HAS_WDT__ /* Definition to show that Module is available */
#define WDTCTL_ 0x0120 /* Watchdog Timer Control */
sfrw(WDTCTL, WDTCTL_);
/* The bit names have been prefixed with "WDT" */
#define WDTIS0 (0x0001)
#define WDTIS1 (0x0002)
#define WDTSSEL (0x0004)
#define WDTCNTCL (0x0008)
#define WDTTMSEL (0x0010)
#define WDTNMI (0x0020)
#define WDTNMIES (0x0040)
#define WDTHOLD (0x0080)
#define WDTPW (0x5A00)
/* WDT-interval times [1ms] coded with Bits 0-2 */
/* WDT is clocked by fSMCLK (assumed 1MHz) */
#define WDT_MDLY_32 (WDTPW+WDTTMSEL+WDTCNTCL) /* 32ms interval (default) */
#define WDT_MDLY_8 (WDTPW+WDTTMSEL+WDTCNTCL+WDTIS0) /* 8ms " */
#define WDT_MDLY_0_5 (WDTPW+WDTTMSEL+WDTCNTCL+WDTIS1) /* 0.5ms " */
#define WDT_MDLY_0_064 (WDTPW+WDTTMSEL+WDTCNTCL+WDTIS1+WDTIS0) /* 0.064ms " */
/* WDT is clocked by fACLK (assumed 32KHz) */
#define WDT_ADLY_1000 (WDTPW+WDTTMSEL+WDTCNTCL+WDTSSEL) /* 1000ms " */
#define WDT_ADLY_250 (WDTPW+WDTTMSEL+WDTCNTCL+WDTSSEL+WDTIS0) /* 250ms " */
#define WDT_ADLY_16 (WDTPW+WDTTMSEL+WDTCNTCL+WDTSSEL+WDTIS1) /* 16ms " */
#define WDT_ADLY_1_9 (WDTPW+WDTTMSEL+WDTCNTCL+WDTSSEL+WDTIS1+WDTIS0) /* 1.9ms " */
/* Watchdog mode -> reset after expired time */
/* WDT is clocked by fSMCLK (assumed 1MHz) */
#define WDT_MRST_32 (WDTPW+WDTCNTCL) /* 32ms interval (default) */
#define WDT_MRST_8 (WDTPW+WDTCNTCL+WDTIS0) /* 8ms " */
#define WDT_MRST_0_5 (WDTPW+WDTCNTCL+WDTIS1) /* 0.5ms " */
#define WDT_MRST_0_064 (WDTPW+WDTCNTCL+WDTIS1+WDTIS0) /* 0.064ms " */
/* WDT is clocked by fACLK (assumed 32KHz) */
#define WDT_ARST_1000 (WDTPW+WDTCNTCL+WDTSSEL) /* 1000ms " */
#define WDT_ARST_250 (WDTPW+WDTCNTCL+WDTSSEL+WDTIS0) /* 250ms " */
#define WDT_ARST_16 (WDTPW+WDTCNTCL+WDTSSEL+WDTIS1) /* 16ms " */
#define WDT_ARST_1_9 (WDTPW+WDTCNTCL+WDTSSEL+WDTIS1+WDTIS0) /* 1.9ms " */
/* INTERRUPT CONTROL */
/* These two bits are defined in the Special Function Registers */
/* #define WDTIE 0x01 */
/* #define WDTIFG 0x01 */
/************************************************************
* DIGITAL I/O PORT0
************************************************************/
#define __MSP430_HAS_PORT0__ /* Definition to show that Module is available */
#define P0IN_ 0x0010 /* Port 0 Input */
const_sfrb(P0IN, P0IN_);
#define P0IN_0 (0x01)
#define P0IN_1 (0x02)
#define P0IN_2 (0x04)
#define P0IN_3 (0x08)
#define P0IN_4 (0x10)
#define P0IN_5 (0x20)
#define P0IN_6 (0x40)
#define P0IN_7 (0x80)
#define P0OUT_ 0x0011 /* Port 0 Output */
sfrb(P0OUT, P0OUT_);
#define P0OUT_0 (0x01)
#define P0OUT_1 (0x02)
#define P0OUT_2 (0x04)
#define P0OUT_3 (0x08)
#define P0OUT_4 (0x10)
#define P0OUT_5 (0x20)
#define P0OUT_6 (0x40)
#define P0OUT_7 (0x80)
#define P0DIR_ 0x0012 /* Port 0 Direction */
sfrb(P0DIR, P0DIR_);
#define P0DIR_0 (0x01)
#define P0DIR_1 (0x02)
#define P0DIR_2 (0x04)
#define P0DIR_3 (0x08)
#define P0DIR_4 (0x10)
#define P0DIR_5 (0x20)
#define P0DIR_6 (0x40)
#define P0DIR_7 (0x80)
#define P0IFG_ 0x0013 /* Port 0 Interrupt Flag */
sfrb(P0IFG, P0IFG_);
/* These two bits are defined in Interrupt Flag 1 */
/* #define P0IFG_0 0x01 */
/* #define P0IFG_1 0x02 */
#define P0IFG_2 (0x04)
#define P0IFG_3 (0x08)
#define P0IFG_4 (0x10)
#define P0IFG_5 (0x20)
#define P0IFG_6 (0x40)
#define P0IFG_7 (0x80)
#define P0IES_ 0x0014 /* Port 0 Interrupt Edge Select */
sfrb(P0IES, P0IES_);
#define P0IES_0 (0x01)
#define P0IES_1 (0x02)
#define P0IES_2 (0x04)
#define P0IES_3 (0x08)
#define P0IES_4 (0x10)
#define P0IES_5 (0x20)
#define P0IES_6 (0x40)
#define P0IES_7 (0x80)
#define P0IE_ 0x0015 /* Port 0 Interrupt Enable */
sfrb(P0IE, P0IE_);
/* These two bits are defined in Interrupt Enable 1 */
/* #define P0IE_0 0x01 */
/* #define P0IE_1 0x02 */
#define P0IE_2 (0x04)
#define P0IE_3 (0x08)
#define P0IE_4 (0x10)
#define P0IE_5 (0x20)
#define P0IE_6 (0x40)
#define P0IE_7 (0x80)
/************************************************************
* LCD REGISTER
************************************************************/
#define __MSP430_HAS_LCD__ /* Definition to show that Module is available */
#define LCDCTL_ 0x0030 /* LCD Control */
sfrb(LCDCTL, LCDCTL_);
/* the names of the mode bits are different from the spec */
#define LCDON (0x01)
#define LCDLOWR (0x02)
#define LCDSON (0x04)
#define LCDMX0 (0x08)
#define LCDMX1 (0x10)
#define LCDP0 (0x20)
#define LCDP1 (0x40)
#define LCDP2 (0x80)
/* Display modes coded with Bits 2-4 */
#define LCDSTATIC (LCDSON)
#define LCD2MUX (LCDMX0+LCDSON)
#define LCD3MUX (LCDMX1+LCDSON)
#define LCD4MUX (LCDMX1+LCDMX0+LCDSON)
/* Group select code with Bits 5-7 Seg.lines Dig.output */
#define LCDSG0 (0x00) /* S0 - S1 O2 - O29 (default) */
#define LCDSG0_1 (LCDP0) /* S0 - S5 O6 - O29 */
#define LCDSG0_2 (LCDP1) /* S0 - S9 O10 - O29 */
#define LCDSG0_3 (LCDP1+LCDP0) /* S0 - S13 O14 - O29 */
#define LCDSG0_4 (LCDP2) /* S0 - S17 O18 - O29 */
#define LCDSG0_5 (LCDP2+LCDP0) /* S0 - S21 O22 - O29 */
#define LCDSG0_6 (LCDP2+LCDP1) /* S0 - S25 O26 - O29 */
#define LCDSG0_7 (LCDP2+LCDP1+LCDP0) /* S0 - S29 --------- */
/* NOTE: YOU CAN ONLY USE THE 'S' OR 'G' DECLARATIONS FOR A COMMAND */
/* MOV #LCDSG0_3+LCDOG2_7,&LCDCTL ACTUALY MEANS MOV #LCDP1,&LCDCTL! */
#define LCDOG1_7 (0x00) /* S0 - S1 O2 - O29 (default) */
#define LCDOG2_7 (LCDP0) /* S0 - S5 O6 - O29 */
#define LCDOG3_7 (LCDP1) /* S0 - S9 O10 - O29 */
#define LCDOG4_7 (LCDP1+LCDP0) /* S0 - S13 O14 - O29 */
#define LCDOG5_7 (LCDP2) /* S0 - S17 O18 - O29 */
#define LCDOG6_7 (LCDP2+LCDP0) /* S0 - S21 O22 - O29 */
#define LCDOG7 (LCDP2+LCDP1) /* S0 - S25 O26 - O29 */
#define LCDOGOFF (LCDP2+LCDP1+LCDP0) /* S0 - S29 --------- */
#define LCDMEM_ (0x0031) /* LCD Memory */
#ifndef __STDC__
#define LCDMEM (LCDMEM_) /* LCD Memory (for assembler) */
#else
#define LCDMEM ((volatile char*) LCDMEM_) /* LCD Memory (for C) */
#endif
#define LCDM1_ 0x0031 /* LCD Memory 1 */
sfrb(LCDM1, LCDM1_);
#define LCDM2_ 0x0032 /* LCD Memory 2 */
sfrb(LCDM2, LCDM2_);
#define LCDM3_ 0x0033 /* LCD Memory 3 */
sfrb(LCDM3, LCDM3_);
#define LCDM4_ 0x0034 /* LCD Memory 4 */
sfrb(LCDM4, LCDM4_);
#define LCDM5_ 0x0035 /* LCD Memory 5 */
sfrb(LCDM5, LCDM5_);
#define LCDM6_ 0x0036 /* LCD Memory 6 */
sfrb(LCDM6, LCDM6_);
#define LCDM7_ 0x0037 /* LCD Memory 7 */
sfrb(LCDM7, LCDM7_);
#define LCDM8_ 0x0038 /* LCD Memory 8 */
sfrb(LCDM8, LCDM8_);
#define LCDM9_ 0x0039 /* LCD Memory 9 */
sfrb(LCDM9, LCDM9_);
#define LCDM10_ 0x003A /* LCD Memory 10 */
sfrb(LCDM10, LCDM10_);
#define LCDM11_ 0x003B /* LCD Memory 11 */
sfrb(LCDM11, LCDM11_);
#define LCDM12_ 0x003C /* LCD Memory 12 */
sfrb(LCDM12, LCDM12_);
#define LCDM13_ 0x003D /* LCD Memory 13 */
sfrb(LCDM13, LCDM13_);
#define LCDM14_ 0x003E /* LCD Memory 14 */
sfrb(LCDM14, LCDM14_);
#define LCDM15_ 0x003F /* LCD Memory 15 */
sfrb(LCDM15, LCDM15_);
#define LCDMA (LCDM10) /* LCD Memory A */
#define LCDMB (LCDM11) /* LCD Memory B */
#define LCDMC (LCDM12) /* LCD Memory C */
#define LCDMD (LCDM13) /* LCD Memory D */
#define LCDME (LCDM14) /* LCD Memory E */
#define LCDMF (LCDM15) /* LCD Memory F */
/************************************************************
* BASIC TIMER
************************************************************/
#define __MSP430_HAS_BT__ /* Definition to show that Module is available */
#define BTCTL_ 0x0040 /* Basic Timer Control */
sfrb(BTCTL, BTCTL_);
/* The bit names have been prefixed with "BT" */
#define BTIP0 (0x01)
#define BTIP1 (0x02)
#define BTIP2 (0x04)
#define BTFRFQ0 (0x08)
#define BTFRFQ1 (0x10)
#define BTDIV (0x20) /* fCLK2 = ACLK:256 */
#define BTHOLD (0x40) /* BT1 is held if this bit is set */
#define BTSSEL (0x80) /* fBT = fMCLK (main clock) */
#define BTCNT1_ 0x0046 /* Basic Timer Count 1 */
sfrb(BTCNT1, BTCNT1_);
#define BTCNT2_ 0x0047 /* Basic Timer Count 2 */
sfrb(BTCNT2, BTCNT2_);
/* Frequency of the BTCNT2 coded with Bit 5 and 7 in BTCTL */
#define BT_fCLK2_ACLK (0x00)
#define BT_fCLK2_ACLK_DIV256 (BTDIV)
#define BT_fCLK2_MCLK (BTSSEL)
/* Interrupt interval time fINT coded with Bits 0-2 in BTCTL */
#define BT_fCLK2_DIV2 (0x00) /* fINT = fCLK2:2 (default) */
#define BT_fCLK2_DIV4 (BTIP0) /* fINT = fCLK2:4 */
#define BT_fCLK2_DIV8 (BTIP1) /* fINT = fCLK2:8 */
#define BT_fCLK2_DIV16 (BTIP1+BTIP0) /* fINT = fCLK2:16 */
#define BT_fCLK2_DIV32 (BTIP2) /* fINT = fCLK2:32 */
#define BT_fCLK2_DIV64 (BTIP2+BTIP0) /* fINT = fCLK2:64 */
#define BT_fCLK2_DIV128 (BTIP2+BTIP1) /* fINT = fCLK2:128 */
#define BT_fCLK2_DIV256 (BTIP2+BTIP1+BTIP0) /* fINT = fCLK2:256 */
/* Frequency of LCD coded with Bits 3-4 */
#define BT_fLCD_DIV32 (0x00) /* fLCD = fACLK:32 (default) */
#define BT_fLCD_DIV64 (BTFRFQ0) /* fLCD = fACLK:64 */
#define BT_fLCD_DIV128 (BTFRFQ1) /* fLCD = fACLK:128 */
#define BT_fLCD_DIV256 (BTFRFQ1+BTFRFQ0) /* fLCD = fACLK:256 */
/* LCD frequency values with fBT=fACLK */
#define BT_fLCD_1K (0x00) /* fACLK:32 (default) */
#define BT_fLCD_512 (BTFRFQ0) /* fACLK:64 */
#define BT_fLCD_256 (BTFRFQ1) /* fACLK:128 */
#define BT_fLCD_128 (BTFRFQ1+BTFRFQ0) /* fACLK:256 */
/* LCD frequency values with fBT=fMCLK */
#define BT_fLCD_31K (BTSSEL) /* fMCLK:32 */
#define BT_fLCD_15_5K (BTSSEL+BTFRFQ0) /* fMCLK:64 */
#define BT_fLCD_7_8K (BTSSEL+BTFRFQ1+BTFRFQ0) /* fMCLK:256 */
/* with assumed vlues of fACLK=32KHz, fMCLK=1MHz */
/* fBT=fACLK is thought for longer interval times */
#define BT_ADLY_0_064 (0x00) /* 0.064ms interval (default) */
#define BT_ADLY_0_125 (BTIP0) /* 0.125ms " */
#define BT_ADLY_0_25 (BTIP1) /* 0.25ms " */
#define BT_ADLY_0_5 (BTIP1+BTIP0) /* 0.5ms " */
#define BT_ADLY_1 (BTIP2) /* 1ms " */
#define BT_ADLY_2 (BTIP2+BTIP0) /* 2ms " */
#define BT_ADLY_4 (BTIP2+BTIP1) /* 4ms " */
#define BT_ADLY_8 (BTIP2+BTIP1+BTIP0) /* 8ms " */
#define BT_ADLY_16 (BTDIV) /* 16ms " */
#define BT_ADLY_32 (BTDIV+BTIP0) /* 32ms " */
#define BT_ADLY_64 (BTDIV+BTIP1) /* 64ms " */
#define BT_ADLY_125 (BTDIV+BTIP1+BTIP0) /* 125ms " */
#define BT_ADLY_250 (BTDIV+BTIP2) /* 250ms " */
#define BT_ADLY_500 (BTDIV+BTIP2+BTIP0) /* 500ms " */
#define BT_ADLY_1000 (BTDIV+BTIP2+BTIP1) /* 1000ms " */
#define BT_ADLY_2000 (BTDIV+BTIP2+BTIP1+BTIP0) /* 2000ms " */
/* fCLK2=fMCLK (1MHz) is thought for short interval times */
/* the timing for short intervals is more precise than ACLK */
/* NOTE */
/* Be sure that the SCFQCTL-Register is set to 01Fh so that fMCLK=1MHz */
/* Too low interval time results in interrupts too frequent for the processor to handle! */
#define BT_MDLY_0_002 (BTSSEL) /* 0.002ms interval *** interval times */
#define BT_MDLY_0_004 (BTSSEL+BTIP0) /* 0.004ms " *** too short for */
#define BT_MDLY_0_008 (BTSSEL+BTIP1) /* 0.008ms " *** interrupt */
#define BT_MDLY_0_016 (BTSSEL+BTIP1+BTIP0) /* 0.016ms " *** handling */
#define BT_MDLY_0_032 (BTSSEL+BTIP2) /* 0.032ms " */
#define BT_MDLY_0_064 (BTSSEL+BTIP2+BTIP0) /* 0.064ms " */
#define BT_MDLY_0_125 (BTSSEL+BTIP2+BTIP1) /* 0.125ms " */
#define BT_MDLY_0_25 (BTSSEL+BTIP2+BTIP1+BTIP0)/* 0.25ms " */
/* Reset/Hold coded with Bits 6-7 in BT(1)CTL */
/* this is for BT */
//#define BTRESET_CNT1 (BTRESET) /* BTCNT1 is reset while BTRESET is set */
//#define BTRESET_CNT1_2 (BTRESET+BTDIV) /* BTCNT1 .AND. BTCNT2 are reset while ~ is set */
/* this is for BT1 */
#define BTHOLD_CNT1 (BTHOLD) /* BTCNT1 is held while BTHOLD is set */
#define BTHOLD_CNT1_2 (BTHOLD+BTDIV) /* BT1CNT1 .AND. BT1CNT2 are held while ~ is set */
/* INTERRUPT CONTROL BITS */
/* #define BTIE 0x80 */
/* #define BTIFG 0x80 */
/************************************************************
* SYSTEM CLOCK GENERATOR
************************************************************/
#define __MSP430_HAS_FLL__ /* Definition to show that Module is available */
#define SCFI0_ 0x0050 /* System Clock Frequency Integrator 0 */
sfrb(SCFI0, SCFI0_);
#define FN_2 (0x04)
#define FN_3 (0x08)
#define FN_4 (0x10)
#define SCFI1_ 0x0051 /* System Clock Frequency Integrator 1 */
sfrb(SCFI1, SCFI1_);
#define SCFQCTL_ 0x0052 /* System Clock Frequency Control */
sfrb(SCFQCTL, SCFQCTL_);
/* System clock frequency values fMCLK coded with Bits 0-6 in SCFQCTL */
/* #define SCFQ_32K 0x00 fMCLK=1*fACLK only a range from */
/* #define SCFQ_64K 0x01 fMCLK=2*fACLK 3+1 to 127+1 is possible */
#define SCFQ_128K (0x03) /* fMCLK=4*fACLK */
#define SCFQ_256K (0x07) /* fMCLK=8*fACLK */
#define SCFQ_512K (0x0F) /* fMCLK=16*fACLK */
#define SCFQ_1M (0x1F) /* fMCLK=32*fACLK */
#define SCFQ_2M (0x3F) /* fMCLK=64*fACLK */
#define SCFQ_4M (0x7F) /* fMCLK=128*fACLK not possible for ICE */
#define CBCTL_ 0x0053 /* Crystal Buffer Control *** WRITE-ONLY *** */
sfrb(CBCTL, CBCTL_);
#define CBE (0x01)
#define CBSEL0 (0x02)
#define CBSEL1 (0x04)
/* Source select of frequency at output pin XBUF coded with Bits 1-2 in CBCTL */
#define CBSEL_ACLK (0x00) /* source is ACLK (default after POR) */
#define CBSEL_ACLK_DIV2 (CBSEL0) /* source is ACLK/2 */
#define CBSEL_ACLK_DIV4 (CBSEL1) /* source is ACLK/4 */
#define CBSEL_MCLK (CBSEL1+CBSEL0) /* source is MCLK */
/* INTERRUPT CONTROL BITS */
/* These two bits are defined in the Special Function Registers */
/* #define OFIFG 0x02 */
/* #define OFIE 0x02 */
/************************************************************
* 8BIT TIMER/COUNTER
************************************************************/
#define __MSP430_HAS_8BTC__ /* Definition to show that Module is available */
#define TCCTL_ 0x0042 /* Timer/Counter Control */
sfrb(TCCTL, TCCTL_);
/* The bit names have been prefixed with "TC" */
#define TCRXD (0x01)
#define TCTXD (0x02)
#define TCRXACT (0x04)
#define TCENCNT (0x08)
#define TCTXE (0x10)
#define TCISCTL (0x20)
#define TCSSEL0 (0x40)
#define TCSSEL1 (0x80)
/* Source select of clock input coded with Bits 6-7 */
#define TCSSEL_P01 (0x00) /* source is signal at pin P0.1 (default) */
#define TCSSEL_ACLK (TCSSEL0) /* source is ACLK */
#define TCSSEL_MCLK (TCSSEL1) /* source is MCLK */
#define TCSSEL_P01_MCLK (TCSSEL1+TCSSEL0) /* source is signal pin P0.1 .AND. MCLK */
#define TCPLD_ 0x0043 /* Timer/Counter Preload */
sfrb(TCPLD, TCPLD_);
#define TCDAT_ 0x0044 /* Timer/Counter Data */
sfrb(TCDAT, TCDAT_);
/************************************************************
* TIMER/PORT
************************************************************/
#define __MSP430_HAS_TP__ /* Definition to show that Module is available */
#define TPCTL_ 0x004B /* Timer/Port Control */
sfrb(TPCTL, TPCTL_);
#define EN1FG (0x01)
#define RC1FG (0x02)
#define RC2FG (0x04)
#define EN1 (0x08)
#define ENA (0x10)
#define ENB (0x20)
#define TPSSEL0 (0x40)
#define TPSSEL1 (0x80)
/* The EN1 signal of TPCNT1 is coded with with Bits 3-5 in TPCTL */
#define TPCNT1_EN_OFF (0x00) /* TPCNT1 is disabled */
#define TPCNT1_EN_ON (ENA) /* " is enabled */
#define TPCNT1_EN_nTPIN5 (ENB) /* " is enabled with ~TPIN.5 */
#define TPCNT1_EN_TPIN5 (TPSSEL0+ENB) /* " is enabled with TPIN.5 */
#define TPCNT1_EN_nCIN (ENB+ENA) /* " is enabled with ~CIN */
#define TPCNT1_EN_CIN (TPSSEL0+ENB+ENA) /* " is enabled with CIN */
/* Source select of clock input coded with Bits 6-7 in TPCTL */
#define TPSSEL_CLK1_CIN (0x00) /* CLK1 source is signal at CIN (default) */
#define TPSSEL_CLK1_ACLK (TPSSEL0) /* CLK1 source is ACLK */
#define TPSSEL_CLK1_MCLK (TPSSEL1) /* CLK1 source is MCLK */
/* DATA REGISTER ADDRESSES */
#define TPCNT1_ 0x004C /* Timer/Port Counter 1 */
sfrb(TPCNT1, TPCNT1_);
#define TPCNT2_ 0x004D /* Timer/Port Counter 2 */
sfrb(TPCNT2, TPCNT2_);
#define TPD_ 0x004E /* Timer/Port Data */
sfrb(TPD, TPD_);
#define TPD_0 (0x01)
#define TPD_1 (0x02)
#define TPD_2 (0x04)
#define TPD_3 (0x08)
#define TPD_4 (0x10)
#define TPD_5 (0x20)
#define CPON (0x40)
#define B16 (0x80)
#define TPE_ 0x004F /* Timer/Port Enable */
sfrb(TPE, TPE_);
#define TPE_0 (0x01)
#define TPE_1 (0x02)
#define TPE_2 (0x04)
#define TPE_3 (0x08)
#define TPE_4 (0x10)
#define TPE_5 (0x20)
#define TPSSEL2 (0x40)
#define TPSSEL3 (0x80)
/* Source select of clock input coded with Bits 6-7 in TPE
NOTE: If the control bit B16 in TPD is set, TPSSEL2/3
are 'don't care' and the clock source of counter
TPCNT2 is the same as of the counter TPCNT1. */
#define TPSSEL_CLK2_TPIN5 (0x00) /* CLK2 source is signal TPIN.5 (default) */
#define TPSSEL_CLK2_ACLK (TPSSEL2) /* CLK2 source is ACLK */
#define TPSSEL_CLK2_MCLK (TPSSEL3) /* CLK2 source is MCLK */
#define TPSSEL_CLK2_OFF (TPSSEL3+TPSSEL2)/* CLK2 source is disabled */
/************************************************************
* EPROM CONTROL
************************************************************/
#define __MSP430_HAS_EPROM__ /* Definition to show that Module is available */
#define EPCTL_ 0x0054 /* EPROM Control */
sfrb(EPCTL, EPCTL_);
#define EPEXE (0x01)
#define EPVPPS (0x02)
/************************************************************
* Interrupt Vectors (offset from 0xFFE0)
************************************************************/
#define PORT0_VECTOR (0x0000) /* 0xFFE0 Port 0 Bits 2-7 [Lowest Priority] */
#define BASICTIMER_VECTOR (0x0002) /* 0xFFE2 Basic Timer */
#define TIMERPORT_VECTOR (0x000A) /* 0xFFE8 Timer/Port */
#define WDT_VECTOR (0x0014) /* 0xFFF4 Watchdog Timer */
#define IO1_VECTOR (0x0018) /* 0xFFF8 Dedicated IO (P0.1) */
#define IO0_VECTOR (0x001A) /* 0xFFFA Dedicated IO (P0.0) */
#define NMI_VECTOR (0x001C) /* 0xFFFC Non-maskable */
#define RESET_VECTOR (0x001E) /* 0xFFFE Reset [Highest Priority] */
/************************************************************
* End of Modules
************************************************************/
#ifdef __cplusplus
}
#endif /* extern "C" */
#endif /* #ifndef __msp430x31x */
|